Philips CRT Television 14PT2001 User Manual

14PT2001  
Operating Instructions  
1-4/E  
1
03/27/02, 3:04 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INFORMATION AND USEFULT IPS  
Safety Information  
Disconnect mains plug when :  
the red light below the TV screen is flashing continuously.  
a bright white line is displayed across the screen.  
cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois  
leather or soft cloth.  
there is a lightning storm.  
the set is left unattended for a prolonged period of time.  
No naked flame sources, such as lighted candles, should be placed on top of the TV or  
in the vicinity.  
Do not place your TV set under direct sunlight or heat.  
Leave at least 5 cm around each side of TV set to allow for proper ventilation.  
Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain  
or water.  
No objects filled with liquids should be placed on top the TV so as to avoid dripping  
or splashing of liquids on the set.  
UsefulTips  
Do not leave your set on standby mode for a prolonged period of time. Switch off set  
to allow it to be demagnetised. A demagnetised set supports good picture quality.  
Do not shift or move the set around when it is switched on. Uneveness in colour in  
some parts of the screen may occur.  
Never attempt to repair a defective TV yourself. Always consult a skilled service  
personnel.  
3
1-4/E  
3
1/4/02, 8:48 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE CALLING SERVICE  
Below is a list of frequently occurred symptoms. Before you call for service, make these simple  
checks. Some of these symptoms can easily be rectified if you know what to do.  
Symptom  
What you should do  
Colour patch  
(uneveness)  
• Switch off theTV by the mains power button.Wait for 20  
minutes before switching on again.  
• Check theTV is not placed too near speakers or magnetic  
objects.  
No power  
No picture  
• Check theTV’s AC power cord is plugged into the mains  
socket. If there is still no power, disconnect plug.Wait for  
60 seconds and re-insert plug. Switch on theTV again.  
• Check the antenna connection at the rear of theTV.  
• PossibleTV station problem.Try another channel.  
Good picture  
but no sound  
Try increasing the volume.  
• Check that the sound is not muted. If it is muted, press the  
Mute button on the remote control to restore sound.  
Good sound but poor  
colour or no picture  
Try increasing the contrast and brightness setting.  
• Check antenna connection at the rear of theTV.  
Snowish picture and  
noise  
Horizontal dotted lines  
• Possible electrical interference e.g. hairdryer, vacuum  
cleaner, etc. Switch off appliances.  
Double images or  
“Ghost” images  
• Possible poor positioning of antenna. Using a highly  
directional antenna may improve reception.  
TV not responding to  
remote control handset  
• Check life span of batteries of remote control handset.  
• Aim remote control handset directly at remote control  
sensor lens on theTV.  
4
1-4/E  
4
1/4/02, 8:48 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOKING UPY OUR TV (BASIC CONNECTION)  
Antenna Connection  
Connect the aerial plug to the antenna socket ¬  
on the backcover.  
• Insert the mains plug into the wall socket.  
Mains Connection  
• For correct mains voltage, refer to type sticker at  
the rear of the TV set  
• Consult your dealer if mains supply is different.  
Note : This diagram is not representative of the  
actual plug and socket.  
Switching on the Set  
• Press the main power button to switch on/  
off the TV.  
• If the set is on standby (indicator is red),  
press the Power button on the remote  
control to switch on set.  
USE/CARE OF REMOTE CONTROL  
• Insert the correct type of batteries into the  
compartment.  
• Ensure the batteries are placed in the right  
direction.  
5
5-9/E  
5
1/4/02, 8:52 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE AUDIO/VIDEO SOCKETS (PLAYBACK)  
You can view the playback ofVCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO  
andVIDEO INPUT sockets on the rear of theTV.  
– Connect the VIDEO and AUDIO IN sockets on the rear of theTV to the AUDIO and  
VIDEO OUT sockets on theVCR.  
CONNECTING THE AUDIO/VIDEO SOCKETS (RECORDING)  
– Connect the sockets of theVCR which you wish to record from, to the corresponding AV  
sockets.  
6
5-9/29252/E  
6
06/24/02, 3:16 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONS OF REMOTE CONTROL  
& Power button  
Switch set off temporarily to standby mode.  
(The red light indicator lights up when the  
set is on standby mode).  
To switch on set from standby mode, press  
Channel +/– , Digit (0 -9) or Power button.  
&
é Personal Zapping buttons  
é
(
§
è
!
ç
As Personal Zapping buttons, you can surf  
up to 10 personal channels for each button.  
For detailed description of functions, refer  
to section on “Personal Zapping ”.  
Smiley button  
Allows to add and store your personal  
preference channels in your Personal  
Preference list. For detailed description  
of functions, refer to section on “Using  
your Personal Zapping feature”.  
0
Sleeptimer Button  
Allows you to select a time period after  
which the set will switch to standby mode  
automatically.  
( Smart Sound Button  
Press the Smart Sound button repeatedly to  
access 4 different types of sound settings and  
choose your desired setting.  
1
§ Incredible Surround Button  
Not applicable.  
è Menu Button  
Displays the main menu.Also exits menu from  
screen.  
! Cursor Up Button  
Allows you to select the next item on the  
menu.  
ç Cursor Left Button  
Allows you to select the sub-menus and adjust  
the settings.  
0 Volume + / – Button  
Increases or decreases volume.  
1 A/CH(Alternate channel) Button  
Allows you to change between the current  
channel and the previous channel.  
7
5-9/E  
7
03/27/02, 3:37 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONS OF REMOTE CONTROL  
2 A/V Button  
Allows you to select the AV channel.  
3 Frownie button  
Allows to delete stored personal preference  
channels in your Personal Preference list. For  
detailed description of functions, refer to section  
on “Personal Zapping ”.  
2
3
4
5
6
4 Smart Picture Button  
Press the Smart Picture button repeatedly to  
access 5 different types of picture settings and  
choose your desired setting.  
7
8
514  
Not applicable.  
9
61Cursor Right Button  
Allows you to access the sub-menus and adjust  
the settings.  
20  
7 Cursor Down Button  
Allows you to select the next item on the menu.  
21  
8 Channel + / – Buttons  
Allows you to select channels in ascending or  
descending order.  
9 Mute Button  
Mutes sound.To restore sound, press button  
again.  
20 Digit (0 -9) Buttons  
Press to select a channel. For a 2-digit channel  
number, press the first digit and followed  
immediately by the second digit.  
21 OSD button  
Allows you to display the current channel  
number. It also allows to exit menu from the  
screen after control adjustments.  
8
5-9/E  
8
03/27/02, 3:37 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONS OF TV CONTROLS  
INSTALL  
MENU  
/
˝
˙
¸
˚
L
K
¸
˚
VOLUME  
CHANNEL  
&
é
‘ (  
&
é
Mains Power button  
Standby light indicator  
Remote Sensor  
Switch mains power on or off.  
Indicate red light when standby mode is activated.  
Acts as a sensor for activating the controls of the  
TV when remote control handset is aimed at it.  
(
Volume + / buttons  
Adjust sound volume softer/louder.  
Channel 7 / 6 buttons  
Select channel in descending/ascending order.  
Note  
You can enter the main menu by pressing both theVolume- and+buttons at the  
same time.  
Press the Channel 7 or 6 button to select the next item on the menu.  
PressVolume - or + button to access sub-menu and adjust the settings.  
9
5-9/E  
9
1/4/02, 8:53 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING THE MENU LANGUAGE  
Operating instructions generally explains the operation of theTV  
set using the buttons on the remote control unless otherwise stated.  
Please read the following instructions carefully and follow the steps  
as shown to familiarise yourself with the installations and all features  
available in your set.  
Note:When there is no signal input to theTV, you may encounter instability of the  
on screen display. In this instance, please use the v button on your remote  
control to select an AV channel.  
The Language feature allows you to set theTV’s on-screen menu to be shown in your  
desired language.  
Step  
Press button  
Result on screen  
Main  
Picture  
o
Enter main menu.  
É Brightness  
Colour  
I
I
I
Sound  
Features  
Install  
Contrast  
Sharpness  
Colour Temp.  
More...  
œ
¸
Main  
o
Select Install.  
I
I
I
Picture  
Sound  
Features  
Language  
Auto Store  
Manual Store  
Install  
É Sort  
Channel Edit  
Name  
œ
o
Install  
Language  
˙
˙
Enter the Install menu.  
English  
É
I
I
I
I
I
Auto Store  
Manual store  
Sort  
Channel Edit  
Press button repeatedly to cycle  
through the language list and  
Name  
œ
select the language of your choice.  
m
Exit menu from screen.  
10  
10-18/E  
10  
03/27/02, 3:48 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTOMATIC TUNING OF CHANNELS  
Automatic tuning of channels allows you to store each programme automatically.  
Step  
Press button  
Enter main menu.  
Result on screen  
Main  
Picture  
Sound  
o
É Brightness  
Colour  
I
I
I
Features  
Install  
Contrast  
Sharpness  
Colour Temp.  
More...  
œ
Main  
o
Press button repeatedly until  
Install is selected.  
I
I
I
Picture  
Sound  
Features  
Language  
Auto Store  
Manual Store  
É Sort  
Channel Edit  
Name  
¸
Install  
œ
Install  
Language  
o
Enter install menu.  
˙
English  
É
I
I
I
I
I
Auto Store  
Manual store  
Sort  
Channel Edit  
Name  
œ
Install  
o
Select Auto Store.  
I
Language  
¸
Auto Store  
É
I
I
I
I
Manual store  
Sort  
Channel Edit  
Name  
œ
Auto Store  
I
Channel  
TV  
1
Start automatic tuning of  
channels.  
˙
I
142 MHz  
ooooooooooooooπoooooooooooooooo  
Install  
o
œ
I
Language  
Auto Store  
É
I
I
I
I
Manual store  
Sort  
Channel Edit  
Name  
When tuning is completed,  
exit menu from screen.  
m
11  
10-18/E  
11  
04/02/02, 10:00 am  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUAL TUNING OF CHANNELS  
Manual tuning of channels allows you to select your preferred channel number for every  
available programme.  
Step  
Press button  
Result on screen  
Main  
Picture  
o
Enter main menu.  
É Brightness  
Colour  
I
I
I
Sound  
Features  
Install  
Contrast  
Sharpness  
Colour Temp.  
More...  
œ
Main  
o
Press button repeatedly until  
Install is selected.  
I
I
I
Picture  
Sound  
Features  
Language  
Auto Store  
Manual Store  
É Sort  
Channel Edit  
Name  
¸
Install  
œ
Install  
o
Language  
English  
É
Enter install menu.  
I
I
I
I
I
Auto Store  
Manual Store  
Sort  
Channel Edit  
Name  
˙
œ
Install  
o
I
Language  
Auto Store  
Colour System  
Sound System  
I
Press button repeatedly until  
Manual Store is selected.  
Manual Store É Search  
¸
I
Sort  
Channel  
Fine Tune  
Store  
I
I
Channel Edit  
Name  
œ
Manual Store  
o
Enter manual store menu.  
˙
I
Colour System  
I
Sound System  
Search  
Channel  
79 MHz  
É
I
Press button repeatedly until  
Search is selected.  
I
I
Fine Tune  
Store  
¸
œ
MANUAL TUNING OF  
12  
10-18/E  
12  
04/02/02, 10:00 am  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUAL TCUNHIANNGNOELFSCHANNELS  
Step  
Press button  
Result on screen  
Start manual searching. Searching  
stops once a transmitting signal is  
found.  
Manual Store  
o
˙
I
Colour System  
Sound System  
Search  
I
128 MHzÉ  
I
Channel  
I
I
Fine Tune  
Store  
œ
¸
Select Channel.  
Manual Store  
o
I
I
I
Colour System  
Sound System  
Search  
Channel  
Fine Tune  
Store  
Key in the channel number.  
2
5
8
0
1
4
7
3
6
9
9
2
É
I
I
œ
Press button repeatedly until  
Store is selected.  
10  
¸
Manual Storeo  
I
I
I
I
I
Colour System  
Sound System  
Search  
Channel  
Fine Tune  
Store  
Store?É  
œ
Store tuned channel.  
Note : If you want to  
continue searching for  
another transmitting  
channel, repeat steps  
7 to 11.  
11  
12  
˙
Manual Storeo  
I
I
I
I
I
Colour System  
Sound System  
Search  
Channel  
Fine Tune  
Store  
Stored  
œ
m
Exit menu from screen.  
13  
10-18/E  
13  
1/4/02, 8:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING THE COLOUR/SOUND SYSTEM  
This feature allows you to select your desired Colour and Sound system. If Auto  
is selected, the respective colour and sound system will be automatically selected according  
to the transmission system. Note : Select your desired colour and sound system manually if  
reception is poor at Auto mode.  
Step  
Press button  
Result on screen  
Repeat step 1  
to step 5 as in  
“Manual Tuning  
of TV Channels”  
Colour System is selected.  
Manual Store  
o
Colour System  
Sound System  
Search  
Auto É  
I
I
I
I
I
Channel  
Fine Tune  
Store  
œ
o
Manual Store  
Select the desired colour  
system (Auto, PAL,  
NTSC 3.58, NTSC 4.43  
or SECAM).  
˝
Colour System  
PAL  
É
I
I
I
I
I
Sound System  
Search  
Channel  
Fine Tune  
Store  
or  
˙
œ
o
Manual Store  
Press button repeatedly  
until STORE is selected.  
¸
I
I
I
I
I
Colour System  
Sound System  
Search  
Channel  
Fine Tune  
Store  
˙
Store selected system.  
Stored  
œ
o
Proceed to select Sound  
System.  
Manual Store  
¸
or  
˚
9
I
Colour System  
Sound System  
Search  
Auto  
É
I
I
I
I
Channel  
Fine Tune  
Store  
œ
o
Select the desired sound  
system (Auto, BG or  
DK.  
Manual Store  
˝
10  
I
Colour System  
Sound System  
Search  
or  
DK  
É
I
˙
I
I
I
Channel  
Fine Tune  
Store  
œ
o
Manual Store  
I
I
I
I
I
Colour System  
Sound System  
Search  
Channel  
Fine Tune  
Store  
11  
12  
¸
˙
Press button repeatedly  
until STORE is selected.  
Stored  
Store selected system.  
œ
Exit menu from screen.  
m
14  
10-18/E  
14  
03/27/02, 3:49 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FINE TUNING OF CHANNELS  
This feature allows you to adjust picture reception in areas of weak reception.  
Step  
Press button  
Result on screen  
Enter main menu.  
Main  
Picture  
o
É Brightness  
Color  
I
I
I
Sound  
Features  
Install  
Contrast  
Sharpness  
Colour Temp.  
More...  
œ
Main  
o
¸
Press button repeatedly until  
Install is selected.  
I
I
I
Picture  
Sound  
Features  
Language  
Auto Store  
Manual Store  
É Sort  
Channel Edit  
Name  
Install  
œ
Install  
o
Enter install menu.  
I
Language  
Auto Store  
Manual Store  
Sort  
Channel Edit  
Name  
Colour System  
Sound System  
Search  
Channel  
Fine Tune  
Store  
˙
I
É
I
Press button repeatedly until  
Manual Store is selected.  
¸
I
I
œ
Manual Storeo  
I
I
I
I
Colour System  
Sound System  
Search  
Enter manual store menu.  
˙
Channel  
Press button repeatedly until  
FineTune is selected.  
¸
Fine Tune  
Store  
Ñ
❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘❘❘❘❘❘π  
❘❘  
I
œ
Manual Storeo  
I
I
I
I
Colour System  
Sound System  
Search  
Fine tune until the best reception  
is obtained.  
˙
or  
Channel  
˝
Fine Tune  
Store  
Ñ
❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘π  
❘❘  
I
œ
¸
Manual Storeo  
Select Store.  
I
I
I
I
I
Colour System  
Sound System  
Search  
Channel  
Fine Tune  
Store  
Store last fine-tuned status.  
˙
9
Stored  
œ
10  
m
Exit menu from screen.  
15  
10-18/E  
15  
03/27/02, 3:49 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SORTING OF CHANNELS  
This feature rearranges channel numbers.  
Step  
Press button  
Result on screen  
Main  
o
Enter main menu.  
I
I
I
Picture  
Sound  
Features  
Language  
Auto Store  
Manual Store  
Install  
É Sort  
Channel Edit  
Press button repeatedly until  
Install is selected.  
¸
Name  
œ
o
Install  
˙
Enter install menu.  
I
I
I
Language  
Auto Store  
Manual Store  
000  
001  
002  
003  
004  
005  
Press button repeatedly until  
Sort is selected.  
Sort  
Channel Edit  
É
I
¸
I
Name  
œ
Install  
o
Enter sort mode.  
˙
I
I
I
Language  
000  
001  
002  
Auto Store  
Manual Store  
Sort  
Channel Edit  
Name  
É
Select the channel number you want  
to change from (e.g. 002).  
¸
or  
˚
É 003  
004  
I
I
005  
œ
Install  
o
Confirm selection.  
I
I
I
Language  
000  
001  
002  
É 003  
004  
005  
œ
˙
Auto Store  
Manual Store  
Sort  
Channel Edit  
Name  
Ñ
I
I
Install  
o
I
I
I
Language  
Auto Store  
Manual Store  
000  
Select the channel number you want  
to change to (e.g. 005).  
¸
001  
002  
003  
004  
005  
Sort  
É
I
Channel Edit  
Name  
I
Ñ
œ
Confirm selection.  
The change is done.  
Note : Channel numbers 5, 4 and 3  
will move upwards accordingly. that  
is, Channel 5 will move up to Channel  
4, Channel 4 to 3 and Channel 3 to 2.  
˝
Install  
o
9
I
I
I
Language  
Auto Store  
Manual Store  
Sort  
Channel Edit  
Name  
000  
001  
002  
003  
004  
005  
É
I
I
É
œ
10  
Exit menu from screen.  
m
16  
10-18/E  
16  
03/27/02, 3:49 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EDITING OF CHANNELS  
This feature allows you to skip or edit channels which have bad or weakTV signal or channels  
that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by  
the CH (Channel) + or – button.You can only have access to the channel by the Digit (0 -9)  
buttons.  
Step  
Press button  
Result on screen  
Enter main menu.  
Main  
o
I
I
I
Picture  
Sound  
Features  
Language  
Auto Store  
Manual Store  
Press button repeatedly until  
Install is selected.  
Install  
É Sort  
Channel Edit  
Name  
¸
œ
Install  
o
˙
I
I
I
I
Language  
Auto Store  
Manual Store  
Sort  
Channel  
Skipped  
Enter install menu.  
¸
Press button repeatedly until  
Channel Edit is selected.  
Channel EditÉ  
Name  
I
œ
Enter Channel Edit menu.  
˙
Channel Edit  
o
Channel  
Skipped  
2
É
I
2
5
8
0
1
4
7
3
6
9
Key in the channel number to be  
skipped.  
œ
o
Channel Edit  
I
Channel  
Skipped  
Select Skipped.  
¸
On  
Select On to skip channel.  
˙
œ
Exit menu from screen.  
9
m
HOW TO RESTORE SKIPPED CHANNELS  
• Repeat Steps 1 to 5 as in”Editing of Channels”.  
• Key in the channel number to be restored by the  
Digit (0 - 9) button.  
Channel Edit  
o
œ
I
Channel  
Skipped  
Off  
• Select Skipped by the  
¸
button.  
• Select Off to restore channel by the  
button.  
˙
• Exit menu from screen by the  
button.  
m
17  
10-18/E  
17  
03/27/02, 3:49 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMING OF CHANNELS (APPLICABLE TO CERTAIN VERSIONS ONLY)  
This feature enables you to name or rename channels.  
Step  
Press button  
Result on screen  
Enter main menu.  
Main  
o
I
I
I
Picture  
Sound  
Features  
Language  
Auto Store  
Manual Store  
Press button repeatedly until  
Install is selected.  
¸
Install  
É Sort  
Channel Edit  
Name  
œ
Install  
o
Enter install menu.  
˙
I
I
I
I
I
Language  
000  
001  
002  
003  
004  
005  
Auto Store  
Manual Store  
Sort  
Press button repeatedly until  
Name is selected.  
¸
Channel Edit  
Name  
É
œ
Enter name mode.  
Install  
o
˙
I
I
I
I
I
Language  
Auto Store  
Manual Store  
Sort  
000  
001  
002  
003É  
004  
005  
Select the channel you want to  
name.  
˚
or  
¸
Channel Edit  
Name  
É
œ
Install  
o
Move to first character slot.  
I
I
I
I
I
Language  
Auto Store  
Manual Store  
Sort  
000  
001  
002  
003É  
004  
005  
˙
A cursor appears for you to start  
the input of characters. Select the  
character you want. Move to next  
˚
or  
Channel Edit  
Name  
É
œ
¸
character slot by the  
button and  
˙
select the next character.You can  
enter up to a maximum of 5  
characters.After naming the channel,  
press  
button repeatedly until  
˙
name appears on the top left hand  
corner of the screen.This will ensure  
that the name is stored in the  
memory.  
Exit menu from screen.  
9
m
18  
10-18/E/29251  
18  
10/5/02, 11:25 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE TV PICTURE  
The picture menu allows you to make adjustments to the picture.  
Step  
Press button  
Display the main menu on screen.  
Result on screen  
Main  
Picture  
Sound  
o
É Brightness  
Colour  
I
I
I
Features  
Install  
Contrast  
Sharpness  
Colour Temp  
More...  
Picture  
BrightnessÑ❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘❘❘❘❘❘59É  
o
Enter Picture menu.  
˙
I
I
I
I
I
Colour  
Contrast  
Sharpness  
Colour Temp  
NR  
Select item.  
˚
or  
¸
Picture  
Colour  
o
Ñ
Adjust level or select desired  
setting.  
❘❘❘❘❘❘❘❘❘❘❘ ❘❘❘❘❘❘❘❘❘❘❘59É  
˝
I
I
I
I
I
Contrast  
Sharpness  
Colour Temp  
NR  
or  
˙
Contrast +  
œ
Exit menu from screen.  
m
Picture menu items  
Brightness  
Activities  
Increase or decrease brightness level.  
Increase or decrease color level.  
Increase or decrease contrast level.  
Colour  
Contrast  
Sharpness  
Increase or decrease sharpness level to improve detail  
in picture.  
Colour temperature  
Choose from 3 settings (Normal,Warm or Cool).  
NR (Noise Reduction)  
Select “On” to reduce “noisy” picture (little dots on  
picture) due to weak signal.  
Contrast +  
Select “On” to allow you to optimise the total contrast  
for improved picture quality.  
19  
19-20/E  
19  
03/27/02, 3:51 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE TV SOUND  
The sound menu allows you to make adjustments to the sound.  
Step Press button  
Result on screen  
Main  
o
Display the main menu on screen.  
Picture  
É Brightness  
Colour  
I
I
I
Sound  
Features  
Install  
Contrast  
Sharpness  
Colour Temp.  
More...  
œ
Main  
Picture  
o
I
Treble Boost  
É Bass Boost  
AVL  
¸
Select Sound menu.  
Sound  
Features  
Install  
I
I
œ
o
Sound  
Enter Sound menu.  
Treble Boost  
Bass Boost  
AVL  
Off  
˙
I
I
Select item.  
˚
or  
œ
o
¸
Sound  
˝
Select On/Off.  
Treble Boost  
On  
I
Bass Boost  
AVL  
or  
I
˙
œ
m
Exit menu from screen.  
Sound menu items  
Activities  
Treble Boost  
Select “On” to enjoy enhanced treble output.  
Bass Boost  
Select “On” to enjoy enhanced bass output.  
AVL (AutoVolume Leveller) Select “On” to enable volume to remain at a pre-determined  
level should there be a sudden change in volume during  
commercial breaks or channel switching.  
20  
19-20/E  
20  
03/27/02, 3:51 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THET IMER  
TheTimer feature allows you to set the timer to switch to another channel at a specified  
time while you are watching another channel or when theTV is on standby mode.  
Note : For the timer to function, the set must not be switched off. Once the set is switched  
off, the timer is disabled.  
Step  
Press button  
Result on screen  
Display the main menu on screen.  
Main  
Picture  
o
É Brightness  
Colour  
I
I
I
Sound  
Features  
Install  
Contrast  
Sharpness  
Colour Temp.  
More...  
œ
Main  
o
¸
Select Features.  
I
Picture  
Sound  
Timer  
Child Lock  
I
Features É Format  
Install  
I
œ
Enter the Features menu.  
˙
Features  
Timer  
o
É Time  
I
Child Lock  
Format  
Start Time  
Stop Time  
Channel  
I
Activate  
Display  
œ
EnterTimer menu.  
˙
Timer  
o
Time  
É 08:30  
Key in the current time starting from  
the hour follow by minute.  
This is the time where the “start time”  
and “stop time” will take reference  
from.  
2
5
8
0
1
4
7
3
6
9
I
I
I
I
I
Start Time  
Stop Time  
Channel  
Activate  
Display  
œ
o
Timer  
I
Time  
Start TimeÉ 10:30  
Stop Time  
Channel  
Activate  
Display  
Select StartTime.  
¸
I
I
I
I
œ
2
5
8
0
1
4
7
3
6
9
Key in the time you want the  
programme to be switched on.  
21  
21-27/E  
21  
03/27/02, 3:54 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THET IMER  
Step  
Press button  
Result on screen  
Select StopTime.  
¸
Timer  
Time  
o
I
I
Start Time  
Stop Time É 12:30  
I
Channel  
Activate  
Display  
œ
2
5
8
0
1
4
7
3
6
9
I
I
Key in the time you want the  
programme to be switched off.  
9
Select Channel.  
Timer  
Time  
o
¸
10  
11  
I
I
I
Start Time  
Stop Time  
Channel  
Activate  
Display  
2
5
8
0
1
4
7
3
6
9
É
5
I
Key in the channel you want to  
switch to.  
I
œ
Timer  
Time  
o
¸
Select Activate.  
I
12  
I
I
I
Start Time  
Stop Time  
Channel  
Activate  
Display  
É
Once  
Activate timer.You can select  
Once, Daily or Off.  
I
˙
œ
Select Display.  
¸
Timer  
Time  
o
I
I
I
I
I
Start Time  
Stop Time  
Channel  
Activate  
Display  
Select On mode if you want to  
display the time on theTV screen.  
˙
É
On  
œ
Exit menu from screen.  
m
Note :  
• After the StopTime is activated, theTV will go to standby mode  
immediately.  
• If StopTime is not keyed in, the set will go to standby mode after  
2 hours.  
To switch on set from standby mode, press Channel +/–,  
Digit (0 -9) or Power button.  
ACTIVATING THE CHILD LOCK (ACCESS  
22  
21-27/E  
22  
1/4/02, 8:58 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATING THE CHILD LOCK (ACCESS CODE)  
The Child Lock feature allows you to lock channels to prevent your children from watching  
programmes you deem undesirable.  
Note :You can only have access to the locked channels via the remote control. Keep the  
remote control out of reach so as to prevent your children from having access to it.  
Step  
Press button  
Result on screen  
Display the main menu on screen.  
Main  
o
I
Picture  
Sound  
Timer  
Child Lock  
I
Press button repeatedly until  
Features is selected.  
Features É Format  
Install  
¸
I
œ
Enter the Features menu.  
˙
Features  
Timer  
Child Lock  
Format  
o
I
É
Select Child Lock.  
¸
I
œ
o
É
Enter Child Lock mode.  
˙
Features  
Timer  
Child Lock  
Format  
I
Access Code  
xxxx  
Correct  
Key in the 4-digit access code.  
For the first time or if you have  
forgotten the access code, enter  
the universal access code 0711  
twice. It will now prompt you to  
key in a New Code.  
I
2
5
8
0
1
4
7
3
6
9
œ
Features  
Timer  
Child Lock  
Format  
o
I
New Code  
xxxx  
É
2
1
3
I
Key in your preferred code (4-digit).  
4
7
5
8
0
6
9
œ
o
Features  
Timer  
Child Lock  
Format  
Key in the new code the second  
time to confirm code.  
2
5
8
0
1
4
7
3
6
9
I
Confirm Code  
xxxx  
Confirmed  
É
I
The Child Lock menu will now  
appear. You can proceed to lock  
channel (refer to section on  
“Lock Channel”). If not, exit menu  
from screen.  
œ
Child Lock  
Lock Channel  
o
É
9
002  
003  
004  
005  
006  
007  
m
I
I
I
Change Code  
Clear All  
Lock All  
Note : After you have exit menu from screen and you want to  
enter the child lock menu again, you need to key the new  
access code only once.  
œ
23  
21-27/E  
23  
03/27/02, 3:54 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATING THE CHILD LOCK (CHANGE CODE)  
Note : You need to key the access code only once.  
Step  
Press button  
Result on screen  
Repeat Steps 1 to 8 as  
in “ACTIVATING THE  
CHILD LOCK  
The Child Lock menu will  
now appear. You can proceed  
to change code.  
Child Lock  
Lock Channel  
o
É
002  
003  
004  
005  
006  
007  
I
I
I
Change Code  
Clear All  
Lock All  
(ACCESS CODE)”  
œ
¸
Child Lock  
Lock Channel  
Change Code  
o
9
I
New Code  
----  
Select Change Code.  
É
10  
˙
I
Clear All  
Lock All  
I
Enter change code mode.  
œ
Child Lock  
Lock Channel  
Change Code  
o
2
5
8
0
1
4
7
3
6
9
Key in your preferred code  
(4-digit).  
11  
I
New Code  
xxxx  
É
I
Clear All  
Lock All  
I
œ
Key in the new code the  
second time to confirm  
code.  
Child Lock  
o
2
1
3
I
Lock Channel Confirm Code  
12  
4
7
5
8
0
6
9
Change Code  
xxxx  
I
Clear All  
Lock All  
Confirmed  
I
œ
m
Exit menu from screen.  
24  
21-27/E  
24  
1/4/02, 8:58 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATING THE CHILD LOCK (LOCK CHANNEL)  
Step  
Press button  
Result on screen  
Child Lock  
Lock Channel  
o
É
Repeat Steps 1 to 8 as  
in “CHILD Lock (ACCESS  
CODE)”  
The Child Lock menu will  
now appear. You can proceed  
to lock channel.  
002  
003  
004  
005  
006  
007  
I
I
I
Change Code  
Clear All  
Lock All  
œ
Child Lock  
Lock Channel  
o
É
Enter lock channel mode.  
˙
9
002  
003  
004  
005  
006  
007  
I
I
I
Change Code  
Clear All  
Lock All  
É
œ
Select the channel you want  
to lock.  
˚
or  
10  
Child Lock  
Lock Channel  
o
É
002  
003  
004  
005  
006  
007  
I
I
I
Change Code  
Clear All  
Lock All  
¸
É
œ
Activate blocking of channel.  
A keylock symbol will appear  
beside the channel number  
indicating that it is locked.  
Note :To lock more than one  
channel, repeat Steps 10 to 11  
before exiting menu from  
screen.  
11  
12  
˙
Child Lock  
Lock Channel  
o
É
002  
003  
004  
005  
006  
007  
I
I
I
Change Code  
Clear All  
Lock All  
É
F
œ
Exit menu from screen.  
m
25  
21-27/E  
25  
1/4/02, 8:58 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATING THE CHILD LOCK (LOCK ALL)  
You can choose to lock all channels in the Lock All mode in the Child Lock menu.  
Step  
Press button  
Result on screen  
Repeat Steps 1 to 8 as  
in “CHILD Lock (ACCESS  
CODE)”  
The Child Lock menu will  
now appear. You can proceed  
to lock all channels.  
Child Lock  
Lock Channel  
o
É
002  
003  
004  
005  
006  
007  
I
I
I
Change Code  
Clear All  
Lock All  
œ
Child Lock  
o
Select LockAll.  
¸
9
I
I
I
Lock Channel  
Change Code  
Clear All  
Select the On option to  
lock all channels.  
10  
Lock All  
É
On  
˙
œ
11  
m
Exit menu from screen.  
ACTIVATING THE CHILD LOCK (CLEAR ALL)  
To unlock channels that you have locked, enter the Child Lock menu and select the Off option  
ClearAll mode.  
Step  
Press button  
Result on screen  
Repeat Steps 1 to 8 as  
in “CHILD Lock (ACCESS  
CODE)”  
The Child Lock menu will  
now appear. You can proceed  
to clear all channels.  
Child Lock  
Lock Channel  
o
É
002  
003  
004  
005  
006  
007  
I
I
I
Change Code  
Clear All  
Lock All  
œ
o
É
Select Clear All.  
¸
9
Child Lock  
I
Lock Channel  
Change Code  
I
Select the Off option to  
unlock all channels.  
10  
Clear All  
Lock All  
Off  
˙
I
œ
Exit menu from screen.  
m
11  
26  
21-27/E  
26  
04/02/02, 5:36 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE SCREEN FORMAT  
You can have a choice of two formats for your viewing pleasure, namely : - 4:3 mode and the  
EXPAND 4:3 mode through the FORMAT menu.  
Step  
Press button  
Result on screen  
Display the main menu on screen.  
Main  
o
I
Picture  
Sound  
Timer  
Child Lock  
I
Press button repeatedly until  
Features is selected.  
Features É Format  
Install  
¸
I
œ
Enter the Features menu.  
˙
Feature  
o
I
Timer  
Child Lock  
I
Press button repeatedly until  
¸
Format  
4:3  
É
Format is selected.  
œ
œ
o
Press the button repeatedly to  
cycle through the different formats  
(4:3 or Expand 4:3) or and select  
your desired format.  
Feature  
˙
m
I
Timer  
I
Child Lock  
Format  
Expand 4:3É  
œ
œ
Exit menu from screen.  
When to use the Screen Formats  
4:3 format  
Select the 4:3 format if you want to  
display the 4:3 picture using the full  
surface of the screen.  
Expand 4:3 format  
Select the Expand 4:3 format if you  
want to expand movie images  
recorded in the letterbox format.  
When this format is selected, the  
black horizontal bars at the top and  
bottom are expanded thus filling  
up the entireTV screen.  
27  
21-27/E  
27  
03/27/02, 3:54 pm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SMART PICTURE CONTROL  
Whether you are watching a movie or video game, yourTV has automatic video control  
settings matched to your current program source or content.The Smart Picture feature quickly  
resets yourTV’s video controls of program for a number of different types of programs and  
viewing conditions you may have in your home. Each Smart Picture setting is preset at the  
factory to automatically adjust theTVs Brightness, Colour, Picture and Sharpness levels.  
Step  
Press button  
Press botton repeatedly to cycle through the 5 settings namely,  
Personal, DVD/VCD, Rich, Natural and Soft and select  
your desired picture setting.  
`
m
Exit menu from screen.  
Defintion of Picture Settings  
Personal  
Personal  
:
:
Picture settings are set to your preference.  
DVD/VCD  
For optimal picture setting, whenever  
the source is connected to DVD/VCD  
player, select DVD/VCD setting for AV  
mode.  
DVD/VCD  
Rich  
:
Emphasize very vibrant colours.This  
setting is the optimal setting when you  
are viewingTV programmes in a  
brightly-lit room.  
Rich  
Natural  
Soft  
:
:
Emphasize original colours.  
Emphasize “warm” colours.  
(Suitable for dimly-lit room condition and  
givescinema-like effect when light is  
switched off).  
Natural  
Soft  
28  
28-30/E  
28  
1/4/02, 8:59 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SMART SOUND CONTROL  
Whether you are watching a movie or video game, yourTV has automatic sound control  
settings matched to your current program source or content.The Smart Sound feature quickly  
resets yourTV’s sound controls of program for a number of different types of programs and  
viewing conditions you may have in your home. Each Smart Sound setting is preset at the  
factory to automatically adjust theTV’sTreble and Bass levels.  
Step  
Press button  
Press botton repeatedly to cycle through the 4 settings namely,  
Personal, Theatre, Music and Voice and select your desired  
q
sound setting.  
Exit menu from screen.  
m
Definition of Sound Settings  
Personal : Sound settings are set to your preference.  
Personal  
Theatre : Emphasize sensation to action.  
(Bass andTreble boosted)  
Theatre  
Music  
Music  
Voice  
: Emphasize low tone (Bass boosted).  
: Emphasize high tone (treble boosted).  
Voice  
29  
28-30/E  
29  
1/4/02, 8:59 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PERSONAL ZAPPING  
A list or series of favouriteTV programs can be selected and stored in the 4 coloured buttons  
with the Personal Zapping feature.With this feature you can easily viewed up to a total of 10  
preferred channels for each coloured button.  
Adding Channels to the Favourite list  
Step  
Press button  
Result on screen  
2
5
8
0
1
4
7
3
6
9
Select a channel by the Digit  
buttons  
8
8
{ Select List!  
Press button to display list.  
Choose your favourite colour  
{ 8  
Added!  
button to store selected channel.  
Repeat steps 1 to 3 to add and  
store your avourite channels to  
the list.  
Exit menu from screen.  
m
To view through the favourite list  
Press the colour button that you  
have selected.  
Press button repeatedly to cycle  
through your favourite list  
and view your favourite channel.  
Deleting Channels from the Favourite list  
Select a colour button and press  
button repeatedly to select the  
channel you want to delete.  
{ 8  
{Remove Item?- Press  
|
{ 8  
Press button to display list.  
Press button to remove item.  
Repeat steps 1 to 3 to delete  
more channels from list.  
m
Exit menu from screen.  
30  
28-30/E  
30  
1/4/02, 8:59 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
14PT2001  
370 mm  
Picture tube screen size  
Picture tube visible area  
340 mm  
Audio Output :  
Speaker  
1 x 4 W  
TV System  
PAL B/G  
PAL D/K  
PAL I (only for certain versions)  
SECAM B/G  
SECAM D/K  
SECAM K1  
Playback System  
NTSC 3.58, NTSC 4.43, PAL 60  
Set Dimensions :  
Width  
Depth  
360 mm  
370 mm  
357 mm  
Height  
NetWeight of Set (approximate )  
9 kg  
Note  
For OperatingVoltage, Frequency, Power Consumption andVersion Number, refer to the  
type number at the rear of the set.  
31  
31-32/E  
31  
04/02/02, 10:03 am  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3139 125 29252  
31-32/E/29251  
32  
06/24/02, 11:54 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco DVR C1602M User Manual
Philips Computer Drive RWDV3212 User Manual
Philips CRT Television TS3661C1 User Manual
Philips Printer 5900 User Manual
Philips Telephone Accessories SWC4105 User Manual
Philips TV VCR Combo CCA194AT User Manual
Pico Macom Power Supply MPC 12R User Manual
Pioneer Stereo Receiver AVH P5700DVD User Manual
Planar Projector PR3010 User Manual
Powerware Network Card Powerware 9390 User Manual