Register your product and get support at
Register your product and get support at
BDPB5D15P05/0F170
BDP5150/F8
EN
ES
FR
EN User manual
ES Manual del usuario
FR Manuel de l’Utilisateur
EN: For further assistance, call the customer support service in your country.
•
To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.Virgin Islands, contact Philips
Customer Care Center at 1-866-309-0866
To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00
•
ES:Para obtener más información, llame al servicio de soporte al cliente de su país.
•
Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las IslasVírgenes de los
Estados Unidos, comuníquese con Centro de atención al cliente de Philips al 1-866-309-0866
Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 62 00 Solo
Para México.
•
FR:Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de
votre pays.
•
Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines,
communiquez avec le centre de service à la clientèle Philips au : 1-866-309-0866
Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à
01 800 504 62 00
•
© 2010 P&F USA, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
EN
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
•
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) BD/DVD player, please contact our customer service center.
Products that have earned ENERGY STAR®
through superior energy efficiency.
are designed to protect the environment
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Maintenance
Servicing
Supplied Accessories
User Manual
• If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take a
moment to identify the problem you are having, and be
prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you. For online
reference, please visit our web site at
• remote control
• AAA (1.5V)
battery × 2
User Manual
Quick Start
Guide
registration card
Netflix
Box-insert
RCA audio / video cables
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
HDMI cable
(High Speed HDMI Cable)
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the disc lens
• If this unit still does not perform properly although you
refer to the relevant sections and to “TROUBLESHOOTING”
in this user manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup
unit.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not
used.
• Note that discs with special shapes (heart-shaped discs,
octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to play such discs, as they may damage
the unit.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Trademark Information
EN
Manufactured under license
“BD-LIVE” logo is trademark of
Blu-ray Disc Association.
from Dolby Laboratories.
“Dolby” and the double-D
symbol are trademarks of
Dolby Laboratories.
Netflix and the Netflix
logo are trademarks
or registered
trademarks of Netflix,
Inc.
Manufactured under license
under U.S. Patent #’s:
5,451,942; 5,956,674;
5,974,380; 5,978,762;
6,226,616; 6,487,535;
7,392,195; 7,272,567;
7,333,929; 7,212,872 & other
U.S. and worldwide patents
issued & pending. DTS and the
Symbol are registered
trademarks, & DTS-HD,
DTS-HD Master Audio |
Essential and the DTS logos
are trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights
vTuner is a trademark of
Nothing Else Matters
Software, Ltd.
“Blu-ray Disc” and
are trademarks.
is a trademark of DVD Format/Logo Licensing
Corporation.
Reserved.
HDMI, the HDMI Logo, and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of
HDMI Licensing LLC in the
United States and other
countries.
is trademark of Eastman Kodak Company.
“x.v.Color” and “x.v.Color”
logo are trademarks of Sony
Corporation.
Java and all other Java
trademarks and logos are
trademarks or registered
trademarks of Sun
Microsystems, Inc. in the United
States and/or other countries.
Windows Media and the
Windows logo are trademarks
or registered trademarks of
Microsoft Corporation in the
United States and/or other
countries.
DivX®, DivX Certified®, and
associated logos are
trademarks of DivX, Inc. and
are used under license.
“AVCHD” and the “AVCHD” logo
are trademarks of Panasonic
Corporation and Sony
Corporation.
“BONUSVIEW” is trademark of
Blu-ray Disc Association.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
Add Stations on the vTuner Website ...............................36
Function Setup
Connections
Basic Setup
Playback
Others
MP3 / Windows Media™ Audio / JPEG Files ............... 24
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Watch movies in the highest picture quality available for your HDTV. The BDP5150 Blu-ray Disc player offers full high-definition
video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness
delivers a more true-to-life picture.
EN
Pop-up menu
Features
Some BD-videos have a pop-up menu which is a navigation
menu that can be called up and be operated on the TV screen
Blu-ray Disc
without interrupting the playback. You can call up the pop-up
menu by pressing [DISC MENU / POP-UP MENU]. Contents in
the pop-up menu vary depending on the disc.
You can enjoy Blu-ray Disc which is capable of storing five
times more data than a conventional DVD.
BD-Java
HDMI Deep Color
With some BDs which support Java applications, you can
enjoy the interactive functions such as games or interactive
menus.
Deep Color reduces the posterization effect of the playback
image. Refer to “HDMI Deep Color” in the “LIST OF SETTINGS”
Upscale DVD for enhanced picture quality
HDMI 1080p/24 output (BD only)
Your current DVD will look even better than before thanks to
video upscaling. Upscaling will increase the resolution of
standard definition DVD to high definition up to 1080p over
an HDMI connection. The picture will be less jagged and more
realistic for a near high definition experience.
This unit is equipped with the feature which can provide the
smooth movement in the playback of film originated material with
the frame rate of 24 frames per second with progressive. (Available
only when the display device is connected by an HDMI cable.)
Refer to “HDMI 1080p/24” in the “LIST OF SETTINGS” on
Playing back the contents in SD Memory Card
You can play back AVCHD MP3 WMA / JPEGs stored in an SD
.
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD and SD card
ensures that you can continue to enjoy your current audio-
video collection. Additionally, you can view JPEG digital
pictures or listen to MP3 or Windows Media™ Audio music
files.
/
/
Memory Card. You can store picture-in-picture commentary,
subtitles or other extras for BD-ROM ver. 2 (Profile 2.0 / Profile 1.1)
files in an SD Memory Card and play back with the BD-video.
Listen to the rich multi-channel surround sound
Multi-channel surround sound, which realizes real-to-life
sound and makes you feel that you are really there.
Playing back AVCHD files
This unit supports playback of AVCHD format files (new format
for high definition video camcorders) recorded on disc / SD
card. Your high definition personal archive is playable in HD
quality.
Intuitive user interface and remote control
The Philips logical user interface allows you to easily navigate
through your content and settings, so you can quickly find
what you are looking for.
x.v.Color
This unit supports playback of video contents on discs
recorded with “x.v.Color” technology. To watch this video
content with the “x.v.Color” space, a TV or other display
device supporting both video image reproduction using
“x.v.Color” standard and capability of manual switching of its
color space setting is required. Please refer to the owner’s
manual of your display device for further information.
Easy and simple connection to your HDTV via HDMI
Connect your BDP5150 to your HDTV with one single HDMI
(High Definition Multimedia Interface) cable. Philips
recommends HDMI1.3 (category 2) cable (also known as High
Speed HDMI cable) for better compatibility. The high definition
video output signal will be transferred to your HDTV without
conversion to analog signals, so you will get an excellent
picture and sound quality, completely free from noise.
Thanks to other multiple outputs, you can also easily connect
to your home theater system or amplifier.
Netflix
With this unit, you can enjoy movies and TV episodes
streamed instantly from Netflix via the Internet. In order to use
this feature, you must visit netflix.com/Philips on your PC and
become a Netflix member.
About EasyLink (HDMI CEC) (Consumer Electronics
Control)
(This feature is available only in the United States. )
EasyLink (HDMI CEC) allows you to operate the linked
functions of this player with Philips brand TV with EasyLink
feature.
Philips does not guarantee 100 % interoperability with other
brands of HDMI CEC compliant devices.
vTuner
This unit supports vTuner which is a database service of
Internet radio stations. You can enjoy various kinds of Internet
radio stations with vTuner via the Internet.
PiP (BONUSVIEW)
Some BD-videos have the PiP function which enables you to
display the secondary video in the primary video. You can call
up the secondary video by pressing [BONUSVIEW (PiP)]
whenever the scene contains the secondary video.
BD-Live
BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive
functions to be used when this unit is connected to the
Internet in addition to the BONUSVIEW function. The various
functions differ depending on the disc.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Product Info
“Product Info” screen provides you with the information
on this unit’s hardware and software version information.
You can also download the latest firmware from the web
site which is displayed in the “Product Info” screen, and
update the firmware by yourself.
To access “Product Info”, select “Product Info” in the home
menu.
Symbols Used in this User Manual
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
Symbol Description
Description refers to BD-video
Description refers to DVD-video
Description refers to audio CD / DTS-CD
Description refers to DVD-RW/-R and SD card
with AVCHD files
Description refers to BD-RE/-R, DVD-RW/-R
and CD-RW/-R with DivX® files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and SD card with MP3 files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and SD card with
Windows Media™ Audio files
Description refers to BD-RE/-R, DVD-RW/-R,
CD-RW/-R and SD card with JPEG files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel
EN
1
2
3
4* 5*
6
7
8
9
* The unit can also be turned on by pressing these buttons.
1. Q (standby-on) button
5. A (open/close) button*
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press to open or close the disc tray.
6. Disc tray
• Place a disc when opening the disc tray.
7. Display
8. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
9. SD card slot
• Press and hold for 10 seconds to shut down the unit.
• This button lights up in red when the unit is in
standby mode and turns off when the power is on.
2. C (stop) button
• Press to stop playback.
3. F (pause) button
• Press to pause playback.
4. B (play) button*
• Insert an SD Memory Card and play back the
contents in it.
• Press to start or resume playback.
Rear Panel
4
1
2
3
5
LAN
HDMI OUT
COAXIAL
6
7
1. LAN terminal
6. DIGITAL OUT (COAXIAL) jack
• Use to connect a telecommunications equipment
• Use to connect an AV receiver / amplifier, Dolby
Digital / DTS decoder or other device with a digital
audio coaxial input jack with a digital audio coaxial
cable.
with LAN cable.
2. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
7. VIDEO OUT jack
3. AUDIO OUT jacks
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA video cable.
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA audio cable.
4. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with an RCA component video cable.
5. AC power cord
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• Connect to a standard AC outlet to supply power to
• This unit does not have the RF modulator.
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Remote Control
10. B (play) button*
• Press to start playback or resume playback.
11. S (previous) button
1
2
3
29
28
• During playback, press once to return to the
beginning of the current title, chapter, track or file.
• During the JPEG playback, press to return to the
previous file.
• During playback, press twice to return to the
previous title, chapter, track or file.
4
5
6
27
7
12. E (reverse) button
• During playback, press to fast reverse the playback.
13. C (stop) button
8
9
10*
11
• Press to stop playback.
26
25
24
14.
/ (volume) button • Press to adjust the TV volume (only applicable to
the PHILIPS brand TV).
12
13
23
22
15. A (open/close) button*
• Press to open or close the disc tray.
16. Number buttons
21
14
• Press to select a chapter during playback.
• Press to enter values in the input field.
17. SUBTITLE button
15*
16
• Press to select subtitles on a disc.
18. ANGLE button
17
18
20
19
• Press to select camera angles on a disc.
• Press to rotate a picture (JPEG).
19. HDMI button
• Press to set the HDMI output mode.
20. AUDIO button
• Press to select the audio channel (such as audio
languages) on a disc.
21. TV CH
/ buttons * The unit can also be turned on by pressing these buttons.
1. Q (standby-on) button
• Press to change the channel up and down (only
applicable to the PHILIPS brand TV).
22. d (mute) button
• Press to mute the TV volume (only applicable to the
PHILIPS brand TV).
23. D (forward) button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
2. BONUSVIEW (PiP) button
• Press to switch picture in picture feature on/off
(only applicable to BD-video which supports the PiP
(BONUSVIEW) function).
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward
the playback.
3. ZOOM button
• Press to enlarge the picture on the TV screen.
4. RED / GREEN / BLUE / YELLOW button
24. T (next) button
• During playback, press to skip to the next chapter,
track or file.
25. F (pause) button
• Press to activate short cut keys on some BD-video
function.
• When file list / setup list is shown, press to switch
between pages.
• Press to pause playback.
• When playback is in pause mode, press repeatedly
to forward the playback step by step.
5.
(home) button
• Press to display the home menu.
26. INFO
button
6. DISC MENU / POP-UP MENU button
• Press to display the information display.
27. TOP MENU button
BD:
• Press to display the pop-up menu.
DVD:
BD:
• Press to display the disc menu.
7. K / L / s / B buttons
• Press to select items or settings.
8. OK button
• Press to display the top menu.
DVD:
• Press to display the title menu.
28. REPEAT A-B button
• Press to play back a defined section between point
A and B repeatedly.
29. REPEAT button
• Press to confirm or select menu items.
9. BACK U button
• Press to return to the previously displayed menu or
screen function.
• Press to toggle between various repeat modes.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Installing the Batteries in the Remote Control
Using a Remote Control
EN
Install 2 AAA (1.5V) batteries matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
1) Open the cover.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
2) Insert batteries.
- Line of sight:
approx. 23 feet (7 m)
- Either side of the center:
approx. 16 feet (5 m) within 30°
- Above:
approx. 16 feet (5 m) within 15°
- Below:
approx. 10 feet (3 m) within 30°
Make sure to match + and - on the batteries to the
marks indicated in the battery compartment.
3) Close the cover.
30˚
30˚
16 feet (5 m)
16 feet (5 m) 23 feet (7 m)
Note
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel Display
1
2
3
4
* Brightness of the display can be adjusted. Refer to “Front Panel Brightness” in “LIST OF SETTINGS” on page 40.
1. Displays repeat icon. (Appears during repeat playback.)
2. Displays media mode icon (disc mode or SD card mode).
3. Displays playback status icon. Refer to the table below.
4. Displays various kinds of information such as title number, elapsed playing time, repeat type, menu type, etc.
Playback status icon
Mode
Playback is in progress
Stop mode
Pause mode
Fast forward mode
Fast reverse mode
Slow forward mode
Loading the vTuner
e.g.)
Disc is being played back.
Indicating the current title number and the elapsed time.
Current chapter is in chapter repeat mode during playback of disc.
Loading a disc.
Dolby Digital audio is being played back during playback of disc.
DTS audio is being played back during playback of disc.
Home menu is displayed and the unit is in disc mode.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Guide to On-Screen Display
EN
Home Menu
When you turn on the unit, home menu will appear
automatically. Otherwise, press [ (home)].
Blu-ray Disc Player
Disc Tray
SD Card
Settings
Product Info
“Disc Tray”
“SD Card”
:
:
To access the track / file list or media
filter screen
To access the file list or media filter
screen
“Settings”
“Product Info”
“NETFLIX”
“vTuner”
:
:
:
:
To access the settings menus
To access the product information
To access the Netflix screen
To access the menu screen of vTuner
Menu Screen
BD-Player
Settings
1
2
Quick Setup
Player Menu
Advanced Setup
Factory Default
TV Shape
3
HDMI Video Resolution
1. Directory
Displays the current hierarchy.
2. Menus
3. Options
Displays options for the high-lighted item on the left
whenever available.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to the TV
Choose the appropriate connection, then proceed to the corresponding
instruction (A, B or C) on the next page.
1
(Supports up to 1080i(*1), 1080p(*2), 1080p/24 resolution.)
Best
Your TV
HDMI IN
Go To
High
Definition
TV
HDMI cable
Video
Audio
A
No analog audio connection required.
(*1) 1080i : Outputs the video data with frame rate of 30 frames per second.
(*2) 1080p : Outputs the video data with frame rate of 60 frames per second.
Supplied cables used in this connection are as follows:
• HDMI cable (High Speed HDMI Cable) x 1
(Supports up to 1080i resolution.)
Better
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
RCA component video cable
Your TV
Video
Go To
High
Definition
TV
B
+
L
RCA audio cable
Audio
AUDIO IN
R
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
(Supports only 480i resolution.)
Basic
VIDEO IN
RCA video cable
Your TV
Video
Go To
Standard
Definition
TV
L
+
C
RCA audio cable
AUDIO IN
R
Audio
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted
due to the copy right protection system.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x1
• RCA video cable x1
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connect the cables by following the descriptions below.
EN
2
HDMI Video / Audio Connection
Your TV
A
I
II
BRA
/
HDMI IN
HDMI cable
($-) /54
Component Video + Standard Audio Connection
Your TV
L
M I
/
B
RCA component
video cable
COMPONENT
VIDEO IN
Y
Y
PR/CR
PB/CB
P
R/CR
B/CB
L
L
AUDIO IN
P
R
R
AUDIO
OUT
COMPONENT
VIDEO OUT
RCA audio cable
Standard Video + Standard Audio Connection
Your TV
C
L
M I
/
L
L
VIDEO IN
AUDIO IN
RCA video cable
R
R
AUDIO
OUT
VIDEO
OUT
RCA audio cable
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
HDMI Mode and Actual Output Signals
Press [HDMI] to change the resolution of the video signal being output from the HDMI OUT jack. The video resolution
changes as follows every time [HDMI] is pressed. Or change the setting in the “HDMI Video Resolution” in the settings
menu.
Font Panel Display
Press [HDMI]
HDMI Video Resolution
480 Progressive
720 Progressive
1080 Interlaced
1080 Progressive
Press [HDMI]
Press [HDMI]
Press [HDMI]
Copyright protection system
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that both the
player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-
bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of
your display device (or AV receiver / amplifier) for more information.
Note
• When using HDCP-incompatible display device, the picture will not be viewed properly.
• The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length)
may be limited by the device that is connected.
• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI OUT jack.
• When this unit’s HDMI jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI-
DVI converter cable, the signals are output in digital RGB.
• Pressing [HDMI] does not work when HDMI cable is not connected, or when no video signal is being output from
the HDMI OUT jack.
• Pressing [HDMI] does not work during the playback of a BD-video.
• When you make a selection, the TV monitor temporarily goes blank and then comes back again. If it does not, press
[HDMI] repeatedly to change the resolution or press and hold [B (play)] on the front panel for 5 seconds to change
the setting back to its default.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
EN
2-Channel Analog Audio Connection
Digital Audio Connection
stereo system
AV receiver / amplifier
audio
AUDIO IN
R
L
DIGITAL AUDIO INPUT
COAXIAL
digital audio coaxial
input jack
analog audio input jacks
digital audio
RCA cable
RCA audio
cable
L
this unit
I
E
/
COAXIAL
DIGITAL OUT
PCM/BITSTREAM
R
AUDIO
OUT
AUDIO OUT
DIGITAL OUT (COAXIAL)
To set up “Digital Out”, refer to page 46.
Audio Output from Analog Out (2ch Jacks)
“Blu-ray Disc Audio” setting A
“Primary Audio Only”
“Mix Audio Output”
Media
ª
Audio Source
ª
Dolby Digital
DownMix 2ch PCM
DownMix 2ch PCM
DownMix 2ch PCM*1
DownMix 2ch PCM*3
DownMix 2ch PCM
DownMix 2ch PCM*1
DownMix 2ch PCM*2
DownMix 2ch PCM*4
DownMix 2ch PCM
DownMix 2ch PCM*5
DownMix 2ch PCM
Dolby Digital Plus
Dolby TrueHD
DTS®
BD-video
DTS-HD®
LPCM
DownMix 2ch PCM
DownMix 2ch PCM
DownMix 2ch PCM
2ch PCM
Dolby Digital
DTS®
LPCM
DVD-video
DTS-CD
AVCHD
DTS®
Dolby Digital
LPCM
Dolby Digital
MP3 / MP2
DownMix 2ch PCM
DownMix 2ch PCM
DownMix 2ch PCM
DownMix 2ch PCM
2ch PCM
DivX®
Audio CD / MP3 /
Windows Media™ Audio
PCM
2ch PCM
*1
) Full decoded.
*2
*3
*4
*5
) Only the independent substream is decoded.
) Dolby TrueHD stream is decoded.
) Only the Dolby Digital substream is decoded.
) Only the core substream is decoded.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
HDMI Audio Connection
audio
AV receiver / amplifier with an HDMI input jack
this unit
HDMI IN
HDMI cable
HDMI OUT
Supplied cables used in these connections are as follows:
• RCA audio cable (L/R) x 1
• HDMI cable (High Speed HDMI Cable) x 1
Please purchase the rest of the necessary cables at your local store.
Network Connection with LAN
• By connecting this unit to the Internet, you can upgrade the software via the Internet or access the BD-Live, Netflix and
vTuner services.
Telecommunications
equipment (modem, etc.)
Hub or broadband router
WAN
LAN
LAN
5
4
3
2
1
LAN cable
LAN cable
Internet
this unit
I
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Note
• After connecting a LAN cable, set up necessary network settings.
(For the network setup, refer to “Network Connection” on page 48.)
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a
broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port,
use a hub.
• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
• Do not connect your PC directly to the LAN terminal of this unit.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
EN
Finding the Viewing Channel on Your TV
After you have made all the necessary
connections, press [Q (standby-on)] to
1
turn on the unit.
Turn on your TV.
2
3
Press the button on the TV’s remote
control that accesses the external input
channel. It may be labeled “SOURCE”,
“AV” or “SELECT” (refer to your TV’s
user manual). Or press “2” on the TV’s
remote control, then press channel
down button repeatedly until you see
the PHILIPS splash screen.
This is the correct viewing channel (external
input channel).
• If a certain amount of time has passed since
you turned on the unit, you may see the home
menu instead of the PHILIPS splash screen.
Home menu:
Blu-ray Disc Player
Disc Tray
SD Card
Settings
Product Info
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Information on Playback
Before you start playing back a disc, read the following information.
• ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an official DivX Certified
more information and software tools to convert your files
into DivX video.
Playable Discs and Files
This unit is compatible to play back the following discs / files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos. Other disc types are not guaranteed to
play back.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play DivX Video-on-
Demand (VOD) content. To generate the registration
code, locate the DivX VOD section in the device setup
menu. Go to vod.divx.com with this code to complete
the registration process and learn more about DivX VOD.
• Official DivX® Certified product; Plays all versions of DivX®
video (including DivX® 6) with standard playback of
DivX® media files.
• Discs containing the DivX® files with the DivX® GMC
(Global Motion Compensation) playback feature, which
is DivX® supplemental function, cannot be played back
on this unit.
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
Playable discs
Logos
Blu-ray Disc
- BD-video
- BD-RE* (ver. 2.1)
(Recorded in BDMV format)
- BD-R* (ver. 1.1 / 1.2 / 1.3)
(Recorded in BDMV format)
(Unclosed discs may not be played
back.)
Readable cards
SD Memory Card (8 MB - 2 GB)
SDHC Memory Card (4 GB - 8 GB)
miniSD Card (8 MB - 2 GB)
Playable files / data
AVCHD, MP3, WMA, JPEG,
picture-in-picture
commentary, subtitles or
other extras for BD-ROM
ver. 2 (Profile 2.0 / Profile 1.1)
DVD-video
DVD-RW
(finalized video mode discs only)
microSD Card (8 MB - 2 GB)
DVD-R
(finalized video mode discs only)
Note for SD Memory Cards
• This unit supports SD Memory Card with FAT12 /
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
• This unit does not support NTFS file system.
• This unit may not read the SD Memory Cards
formatted on a computer. If that is the case, please
reformat the SD Memory Cards in this unit and try
again.
• This unit does not support miniSDHC and microSDHC
Memory Card.
• For miniSD Card and microSD Card, the adapter is
necessary.
CD-DA (audio CD)
CD-RW
CD-R
Kodak Picture CD
DTS-CD
miniSD Card
microSD Card
adapter
adapter
miniSD Card
-
microSD
Card
• Portions of this product are protected under
copyright law and are provided under license by
ARIS / SOLANA / 4C.
• Please keep the SD Memory Cards in their cases when
you are not using them.
• Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers or
any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit recognizes up to 8 characters of file name in
the SD Memory Card. Characters after 8th will not be
displayed.
(*) Due to the intentional progression of the Blu-ray Disc
format by its standard setting authority, the company
cannot guarantee or warrant the playability of future
extensions of the Blu-ray Disc format with this product.
Playable files
Media
DVD-RW/-R
SD Memory Card (including SDHC)
miniSD Card
AVCHD
microSD Card
BD-RE/-R
DVD-RW/-R
CD-RW/-R
DivX®
BD-RE/-R
DVD-RW/-R
MP3
CD-RW/-R
Windows Media™ Audio
JPEG
SD Memory Card (including SDHC)
miniSD Card
microSD Card
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Unplayable Discs and Files
Hint for Disc Playback
EN
The following discs will not be played back in this unit.
The contents of disc are generally divided into sections or
folders (groups of titles / files) as shown below.
• CD-ROM
• DVD-RAM
• DVD-audio
• HD DVD
• CD-I (compact disc-interactive)
• VSD (video single disc)
• video CD
BD-video, DVD-video, AVCHD
title 1
title 2
• SVCD
chapter 1
track 1
chapter 2 chapter 1 chapter 2 chapter 3
• unfinalized disc
• BD-RE (ver.1.0)
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)
• SD Memory Card contains DivX® files
• BD that contains AVCHD files
Audio CD
track 3
• BD / DVD hybrid disc (played back as a BD-video only)
• Super Audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density Super Audio CD
layer cannot be heard.
track 2
track 4
track 5
• Playability of dual discs are not guaranteed.
DivX®, MP3,Windows Media™ Audio, JPEG
Color Systems
folder (group) 2
file 2
folder (group) 1
file 1
file 2
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
file 1
file 3
This unit employs NTSC color system, so the disc you play
back must be recorded in the NTSC system. You cannot
play back the disc recorded in other color systems.
Description for Icons
Region Codes
[
[
[
[
[
] : group (folder) icon
BD-video
This unit has been designed to play back
BD-video with region “A”, DVD-video with
region “ALL” or “1” for BDP5150/F7 (USA /
Canada) and region “ALL” or “4” for
BDP5150/F8 (Mexico). You cannot play
back BD-video or DVD-video that are
labeled for other regions. Look for the
symbols on the right on your
] : group (folder) return icon
] : video file icon
] : music file icon
] : information icon
DVD-video
- “Folders” refers to the groups of files.
- “Tracks” refers to the contents recorded on the audio
BD-video or DVD-video.
CD.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region
of the world. A BD-video or DVD-video
labeled for a specific region can only be
played back in the unit with the same
region code.
- “Files” refers to the contents on a disc which are
recorded in DivX®, MP3, Windows Media™ Audio, JPEG
file format.
For BDP5150/F7
(USA / Canada)
Note
• Unrecognizable characters will be replaced by “ꢀ”.
• For BD, DVD and SD card, this unit can recognize up
to 999 groups (folders), and 9,999 tracks / files.
• For CD, this unit can recognize up to 255 groups
(folders), and 999 tracks / files.
For BDP5150/F8
(Mexico)
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Picture Mode File List
Guide to File List
1
2
Audio CD Track List
BD-Player | Disc Tray
1
2
24
Pictures
..
3
BD-Player
Music
14
5
4
Track 001
9
Track 002
Track 003
Track 004
Track 005
Track 006
3
4
5
6
CDDA
Track 001
00 : 03 : 40
00 : 00 : 39
Media Filter
Page Down
8
Track 007
Track 008
Page Down
1) Directory
2) Number of contents in the current hierarchy
3) Current file name
4) Group (folder) / File list (thumbnails)
5) Root folder
7
1) Total track number
2) Repeat status
3) Image
4) Elapsed playing time of the current track
5) Playing track number
6) Total time of the current track
7) Playing media
How to Insert a Disc
1) Press [A (open/close)] to open the disc tray.
2) Place the disc on the disc tray with its label side
facing up.
8) Track list
9) Playback status
Video / Music Mode File List
e.g.) MP3 mode
Align the disc to the
disc tray guide.
10
1
2
BD-Player |Disc Tray
Music
of compatible discs).
9
..
9
8
MP3_1.mp3
MP3_2.mp3
MP3_3.mp3
MP3_4.mp3
MP3_5.mp3
MP3_6.mp3
MP3_7.mp3
Media Filter
3
3) Press [A (open/close)] to close the disc tray.
MP3 00:00:13
MP3_3.mp3
4
It may take a while to load the disc.
7
To eject the disc:
Page Down
Press [A (open/close)] to open the disc tray.
Remove the disc.
6
5
Press [A (open/close)] to close the disc tray.
1) Number of contents in the current hierarchy
2) Repeat status (Music mode only)
3) Image
4) Elapsed playing time of the current track
5) Current file name
6) Media type
7) Group (folder) / File list
8) Playback status
9) Root folder
10) Directory
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back a BD, DVD or a Disc with AVCHD Files
EN
how to insert a disc).
1
2
Playback may start automatically.
If not, press [B (play)].
Some discs may show a title or a disc menu. In
this case, refer to “Using the Title / Disc Menu”
To pause playback:
Press [F (pause)].
To return to the normal playback:
Press [B (play)].
To stop playback:
Press [C (stop)].
Playback will be in Resume-On-Stop mode,
and the home menu will appear.
<Resume-On-Stop mode>
When you press [B (play)] next time, the
playback will start from the point where it has
been stopped.
Note
• Playback will also stop and the home menu will
appear when you press [ (home)].
• For BD-Java application, the Resume-On-Stop may
not be available.
• If you press [OK] instead of [B (play)], playback can
be started from the beginning of the disc even if it
was in the Resume-On-Stop mode.
• You can also start from the beginning of the disc if
you press [S (previous)] while the resume message
is displayed.
• The resume message can be removed by pressing
[BACK U].
• Resume-On-Stop mode remains in effect even after
power is turned off, but will be cancelled once the
disc is ejected.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD or a Disc with DivX® / MP3 / Windows Media™ Audio / JPEG Files
How to Navigate through the Track / File List
• Use [K / L] to move the highlight up and down in the
list.
• To access the files in a group (folder), select the desired
group (folder), then press [OK].
• Press [s], or select [
], then press [OK] to go back to
the previous hierarchy.
• Press [s] to go back to the previous screen.
• Press [BLUE] or [YELLOW] to change the page of the list.
• Press [RED] to go back to the media filter screen.
• Press [ (home)] to go back to the home menu.
Recommended specifications:
DivX®
Official DivX® Certified product
• Playable codec of AVI files : DivX® 3.x, DivX® 4.x, DivX®
5.x, DivX® 6.x
• Maximum size of a video : 720 x 480 @30 fps
720 x 576 @25 fps
• Sampling frequency of
audio
: 16 kHz - 48 kHz
• Audio type
: MPEG1 audio layer 3(MP3),
MPEG1 audio layer 2, Dolby
Digital
MP3 / Windows Media™ Audio
• Sampling frequency
: 32 kHz, 44.1 kHz or 48 kHz
• Constant bit rate
: 112 kbps - 320 kbps (MP3),
48 kbps - 192 kbps
(Windows Media™ Audio)
JPEG
Resolution
• Upper limit
: 2,560 x 1,900 dots
(sub sampling is 4:4:4)
: 5,120 x 3,840 dots
(sub sampling is up to
4:2:2)
• Lower limit
• Maximum file size of a
picture
: 32 x 32 dots
: 5 MB
Folder / File number limitations:
BD, DVD and SD card
• 999 folders (groups) and 9,999 files.
CD
• 255 folders (groups) and 999 tracks / files.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Select a group (folder) or track / file
you want to play back. Then press
EN
how to insert a disc).
1
2
4
• Home menu appears automatically.
[B (play)] or [OK] to start playback.
With “Disc Tray” selected, press
[OK].
To skip to the next track / file:
Press [T (next)].
To skip to the previous track / file:
Press [S (previous)].
• Media filter screen will appear.
• For audio CD, skip to step 4.
Blu-ray Disc Player
To pause playback:
Press [F (pause)].
To return to the normal playback:
Press [B (play)].
Disc Tray
SD Card
Settings
Product Info
To stop playback:
Press [C (stop)].
Playback will be in Resume-On-Stop mode.
<Resume-On-Stop mode for audio CD /
DivX® >
Playback will start from the point where it is
Select the type of the file you want
to play back in the media filter
screen. Then press [OK] to display
the file list.
stopped next time you press [B (play)].
3
If you press [OK] instead of [B (play)],
playback will start from the beginning of the
track / file instead of resuming from the stop
point.
“Video”
“Music”
: If you want to play back video
files such as DivX® video, select
“Video”.
: If you want to play back music
files such as MP3 or Windows
Media™ Audio, select “Music”.
<Resume-On-Stop mode for MP3 /
Windows Media™ Audio / JPEG>
Playback will start from the beginning of the
current file next time you press [B (play)] or
[OK].
To go back to the media filter screen:
Press [RED] in Resume-On-Stop mode.
“Pictures” : If you want to play back the still
images such as JPEG pictures,
select “Pictures”.
BD-Player
Disc Tray
Video
Note
• Playback will also stop and the home menu will
appear when you press [ (home)].
• If a disc contains AVCHD files, the playback of other
files which are in the same disc is not available.
• With regard to the multi-border BD-RE/-R,
additionally recorded sections cannot be
recognized.
Music
Pictures
• With regard to the multi-border DVD-RW/-R,
additionally recorded sections may not be
recognized.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Kodak Picture CD
Reading the SD Memory Card
You can play back the AVCHD / MP3 / WMA / JPEG files in
an SD Memory Card.
With the SD Memory Card, you can also enjoy the
following functions.
- Special additional contents for BD-ROM Profile 1 ver.1.1.
(For more information about the special additional
contents, refer to the instruction book that came with
the disc.)
This unit can also run JPEG files stored on Kodak Picture CD.
You can enjoy picture images on the TV set by playing back
the Kodak Picture CD. This unit conforms to ver.7.0 of Kodak
Picture CD. For details of Kodak Picture CD, contact a shop
that provides developing service of Kodak Inc.
Insert a Kodak Picture CD.
• Home menu appears automatically.
1
2
3
- BD-Live function (BD-ROM ver. 2 Profile 2.0). (For more
With “Disc Tray” selected, press
[OK].
• Media filter screen will appear.
Select “Pictures” in the media filter
SD Memory Card
screen. Then press [OK] to display
the file list.
Insert an SD card and then press
Follow step 4 in “Playing Back an
[
(home)].
1
2
3
4
Home menu appears.
With “SD Card” selected, press
[OK].
• Media filter screen will appear.
Tips for JPEG / Kodak Picture CD Playback
• Every press on [ANGLE] will turn the image
Select the type of the file you want
to play back in the media filter
screen. Then press [OK] to display
clockwise by 90 degrees when an image is displayed.
Note
• Some unplayable folders or files may be listed due to
the recording status.
the file list.
Playback of AVCHD files will start right after
you choose “Video”. (The file list is not
available for AVCHD files.)
• High-resolution JPEG files take longer to be
displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back in this unit.
Follow step 4 in “Playing Back an
Audio CD or a Disc with DivX® / MP3 /
4
To remove the SD Memory Card:
In stop mode, gently push in the SD Memory
Card, then pull it out slowly.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Note
Note
EN
• In the “SD Card” mode, the resume information will
be cleared when;
• A file with an extension of “.avi” and “.DivX” is called
as a DivX® file. All files with the “.avi” extension are
recognized as MPEG4.
-[C (stop)] is pressed while in the Resume-On-Stop
mode.
-the SD Memory Card is removed.
• For CD-RW/-R, maximum of 255 group (folder) or 999
files may be recognized.
• For BD-RE/-R and DVD-RW/-R, maximum of 999
group (folder) or 9,999 files may be recognized.
• The 10th and deeper hierarchies cannot be
displayed.
• Unrecognizable characters will be replaced with “ꢀ”.
• When playing back the files recorded in high bit
rates, the images can be interrupted in some
occasions.
• Although DivX® logo has been obtained for this unit,
it may not be able to play back some data,
depending on the characteristics, bit rates, or audio
format settings, etc.
• If a large-sized DivX® file is selected, it may take a
while to start the playback (over 20 seconds
sometimes).
• If DivX® files written on a CD-RW/-R cannot be played
back, rewrite them on a BD-RE/-R or DVD-RW/-R, and
try playing it back again.
-the unit is turned into the standby mode.
• Do not remove the SD Memory Card or turn the unit
to the standby mode while the contents of the card
are in playback. It may result in malfunction or loss of
the card’s data.
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit may not read the
SD Memory Cards formatted on a computer.
• If a folder or file name includes one of the following
unrecognizable characters, the folder or file name
may not be displayed correctly.
-Unrecognizable characters :
. , " = + [ ] ; / \ : | ¥
About DivX® and DivX® VOD
• For more information for DivX®, please visit
Hint for the purchased or rented official DivX®
Certified product
• When you purchase or rent a DivX® file through the
official site of DivX® video which is called DivX® Video
On-Demand (VOD) services, a registration code is
required every time you get the new file from the DivX®
VOD services. Refer to “DivX® VOD” in “LIST OF SETTINGS”
on page 40.
Possible Errors
“This rental has c views left. Do you want to use one of
your c views now?”
Some DivX® VOD files are restricted with the limited
playable times. You cannot play them back beyond the
limit.
“This player is not authorized to play this video.”
You cannot play back the DivX® VOD files obtained with
different registration codes on this unit.
“This rental is expired.”
You cannot play back the DivX® VOD files with the expired
rental period.
“This player does not support this video format.”
You cannot play back the DivX® files whose image size
exceeds 720 x 576.
“This player does not support this audio format.”
For DivX® files with audio format other than MPEG1 audio
layer 3 (MP3), MPEG1 audio layer 2 and Dolby Digital,
audio will not be output and only the video will be output.
“This player does not support this video frame rate.”
You cannot play back the DivX® files whose frame rate
exceeds 30 fps.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back a DivX® with DivX®
External Subtitle
Using the Title / Disc Menu
Some BD-video, DVD-video or AVCHD files may contain a
title menu which describes the contents of the disc, or a
disc menu which guides you through the available
Subtitles created by the user can be displayed during
DivX® playback.
With such discs, a title menu or a disc menu may appear
automatically when you insert the disc. Otherwise, press
[TOP MENU] or [DISC MENU / POP-UP MENU] to call up
the menu. Refer to the disc’s manual on how to navigate
through the menu.
2) Select a file you want to play back, then press
[GREEN].
Subtitle list will appear.
Note
Subtitle List
3dolby.avi
Off
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [TOP MENU] or [DISC MENU / POP-UP MENU] may
not work with some discs.
SMI
SRT
SUB
• Title menu is also available for SD card with AVCHD
files.
Cancel
• “DivX Subtitle” appears next to “Green” icon only when
DivX® subtitle is available for the selected file.
• If you press [B (play)] or [OK] instead of [GREEN],
playback without subtitle will start.
3) Select the desired subtitle file, then press
[B (play)] or [OK].
Playback of the DivX® file with DivX® subtitle will start.
Note
• To utilize this function, the following conditions
must meet.
-Playback file and the subtitle file must have the same
name.
-Playback file and the subtitle file must locate in the
same folder.
-Only the subtitle files with the following extensions
are supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass
(.ASS), .ssa (.SSA), .txt (.TXT). (.sub (.SUB) and .txt
(.TXT) may not be recognized.)
-The subtitles that exceeds the playback time of the
DivX® file will not be displayed.
• If the DivX® subtitle file contains more than one
subtitle language, you can toggle those by pressing
[SUBTITLE] repeatedly.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Fast Forward / Fast Reverse
Zoom
EN
During playback, you can zoom up the picture.
.
1) During playback, press [ZOOM] repeatedly.
1) During playback, press [D (forward)] repeatedly
for fast forward.
Every time you press [ZOOM], zoom factor will change.
During playback, press [E (reverse)] repeatedly
e.g.) DVD-video
for fast reverse.
Every time you press [D (forward)] or [E (reverse)],
the playback speed will change.
Zoom
1.2x
2) Press [B (play)] to return to the normal playback.
Note
• For BD, DVD and AVCHD, speed changes in 5
different levels.
• For audio CD, DivX®, MP3 and Windows Media™
Audio, speed changes in 3 different levels.
• For some DivX® files, fast forward / fast reverse may
not function.
Zoom
2x
Slow Forward Playback
1) During playback, press [F (pause)] . Then press
[D (forward)].
2) You can move over the zoomed picture using
[K / L / s / B].
Every time you press [D (forward)], the playback
speed changes in 3 different levels.
The gray box with an inner blue box displayed at the
right bottom corner of the zoomed image is the
position guide. The inner blue box indicates the
zoomed area. (Not available for the JPEG playback.)
3) Press [ZOOM] repeatedly to return to the normal
playback.
2) Press [B (play)] to return to the normal playback.
Note
• Only slow forward is available.
• For some DivX® files, slow forward may not function.
Note
• For JPEG files, slide show of the zoomed picture is
not possible.
• For some DivX® files, zoom may not be available.
• For DivX® and JPEG files, 4x zoom is not available.
• For some DVD, 4x zoom is not available.
• [ZOOM] does not work during the playback of the
BD-video.
• [ZOOM] does not work while DVD menu is
displayed.
• For JPEG files, when changing the zoom factor or
moving the zoom position, the screen may become
black for a moment. This is not a malfunction.
Step by Step Playback
1) In pause mode, press [F (pause)] repeatedly.
Every time you press [F (pause)], playback will
advance one step at a time.
2) Press [B (play)] to return to the normal playback.
Note
• Only step by step forward is available.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Note
Repeat Playback
• Point B should be set within the same title or track as
point A.
Available repeat function varies depending on the discs.
• If you press [REPEAT A-B] when the repeat setting
for BD, DVD or CD playback is set, the repeat setting
will be cancelled.
• For some DivX® files, A-B repeat playback may not
function.
1) During playback, press [REPEAT] repeatedly to
select the desired repeat function.
REPEAT MODE
Chapter Repeat
The current chapter will be
played back repeatedly.
AVAILABLE MEDIA
BD-video / DVD-video /
AVCHD
Slide Show
Title Repeat
The current title will be
played back repeatedly.
BD-video / DVD-video /
AVCHD
Track Repeat
The current track or file will
be played back repeatedly.
Audio CD / DTS-CD /
DivX® / MP3 /
Windows Media™ Audio
2) Open the folder which contains the desired JPEG files.
All Repeat
Audio CD / DTS-CD
All tracks in the media will be
played back repeatedly.
Group Repeat
The current group (folder)
will be played back
repeatedly.
3) Use [K / L / s / B] to select a desired file to be
played back, then press [B (play)] or [OK].
• An image will be played back from the selected file
and go to the next one in turn every 10 seconds.
4) Press [C (stop)] to stop playback.
To return to the first item:
DivX® / MP3 /
Windows Media™ Audio /
JPEG
Press [TOP MENU].
Random Repeat (Audio CD)
Audio CD / DTS-CD
Repeats the random
playback.
To return to the file played last:
Press [DISC MENU / POP-UP MENU].
Random Repeat
(DivX® / MP3 /
Windows Media™ Audio /
JPEG)
Repeats the random
playback in a folder.
Note
DivX® / MP3 /
Windows Media™ Audio /
JPEG
• Large-size JPEG files take a few moments to be
displayed.
PiP (BONUSVIEW) Setting
Note
• The repeat setting will be cancelled when you stop
playback.
• If you press [REPEAT A-B] when the repeat setting
for BD, DVD or CD playback is set, the repeat setting
will be cancelled.
• When the repeat setting is set for a MP3 or WMA
folder (file), the repeat setting will be cancelled if you
select other MP3 or WMA folder (file) to playback.
Some BD-videos have the PiP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing
[BONUSVIEW (PiP)] whenever the scene contains the
secondary video.
Primary
video
A-B Repeat
Secondary
video
You can play back the specific part (between point A and
point B) repeatedly.
1) During playback, press [REPEAT A-B] once at the
1) During playback, press [BONUSVIEW (PiP)].
PiP information will appear.
point where you want to set point A.
2) During playback, press [REPEAT A-B] again at the
point where you want to set point B.
2) Use [K / L] to select the secondary video you want
to show.
As soon as you set point B, the part between point A
and point B will start to play repeatedly.
To cancel A-B repeat:
• The secondary video will be displayed with the
secondary audio.
• You can use [K / L] to switch between “On” or “Off”.
3) Press [BACK U] to remove the PiP information.
• On how to output the secondary audio, refer to
Press [REPEAT A-B] repeatedly until “Off” appears.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Enjoying BD-Live Discs with Internet
Title / Chapter Search
EN
You can enjoy the BD-Live functions which enable you to
use the interactive functions when the unit is connected to
the Internet.
Using [S (previous)] / [T (next)]
1) During playback, press [T (next)] to skip the
current title or chapter and move to the next.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title may
be skipped.
Examples for BD-Live interactive functions:
• Download the additional contents such as the movie’s
trailer, subtitles and BD-Java, etc.
• While downloading, special video data may be played
back.
To go back to the beginning of the current title or
chapter, press [S (previous)].
Press [S (previous)] repeatedly to go to the previous
title or chapter. The title or chapter may move
backward one at a time.
- Service and functions differ depending on the disc.
Follow the instructions given by the disc when using
the BD-Live function.
- You must insert an SD Memory Card when using the
BD-Live function. (SD Memory Card of 1GB is
recommended.)
- Do not remove the SD Memory Card when using the
BD-Live function.
Using [INFO
]
1) During playback, press [INFO ].
Disc
Title
001/012
necessary settings in order to use the BD-Live
function.
Chapter
Playing Time
Audio
001/023
00:01:31
Dolby Digital
• For the network connection, refer to “Network
Connection with LAN” on page 18.
• For the network setup, refer to “Network
Connection” on page 48.
• For certain discs, setting for “BD-Live Setting” may
need to be changed.
• Depending on your connection environment, it may
take time to connect to the Internet or the Internet
may not be connected.
2) Use [K / L] to select “Title” or “Chapter”.
3) Use [Number buttons] or [s / B] to enter the title /
chapter number.
4) Press [OK].
Playback will start from the beginning of the title /
chapter.
• When BD-Live functions are used and the unit is
connected to the Internet, you may be charged for
this communication.
• Some discs with BD-Live function require memory
when playing back the content. If you cannot play
back a disc with BD-Live function, insert an SD
card(1GB or more) which is formatted on this unit.
5) Press [INFO ] to remove the information display.
Using [Number buttons] (Direct Search)
Title Search
1) In stop mode, enter the title number you want to
search using [Number buttons].
Note for AACS Online
• The player or disc IDs may be sent to the content
provider when playing back a disc with BD-Live
function.
Playback of the title will start in a few seconds.
Chapter Search
1) During playback of a title, enter the chapter number
you want to search using [Number buttons].
• If you save your viewing history on the server by
using these IDs, you will be introduced to other
similar movies.
Playback of the chapter will start in a few seconds.
• You can save game score histories.
Note
• As for the BD-video, how it performs will be strongly
determined by the disc, and may not perform as
described.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Track Search
Switching Subtitles
Some BD and DVD may have subtitles in 1 or more
languages. For commercially available discs, the
supported languages can be found on the disc case.
Follow the steps below to switch the subtitle languages
during playback.
Using [S (previous)] / [T (next)]
1) During playback, press [T (next)] to skip the
current track or file and move to the next.
The track / file will move forward one at a time. To go
back to the beginning of the current track / file press
[S (previous)].
1) During playback, press [SUBTITLE] repeatedly to
display “Primary”, “Secondary” or “Subtitle Style”.
Press it repeatedly to go to the previous track / file. The
track / file will move backward one at a time.
“Primary”
: Sets the subtitle for the primary
video.
Time Search
“Secondary”
: Sets the subtitle for the secondary
video.
“Subtitle Style” : Sets style of the subtitle.
2) Use [K / L] to select your desired subtitle or style.
1) During playback, press [INFO ].
Disc
Primary
1
English
Title
001/012
Chapter
Playing Time
Audio
001/023
• Use [s / B] to switch between current subtitle
setting and “Off”.
3) Press [SUBTITLE] repeatedly to exit.
00:01:31
Dolby Digital
2) Use [K / L] to select “Playing Time”.
3) Use [Number buttons] to enter the time count you
want to jump to.
1) During playback, press [SUBTITLE].
2) Use [K / L] to select your desired subtitle.
e.g.)
Subtitle
1
English
Entering 1 hour 45 minutes and 15 seconds.
• Use [s / B] to switch between current subtitle
setting and “Off”.
3) Press [SUBTITLE] to exit.
Press
4) Press [OK].
Playback will start from the desired time count.
Note
• Some discs will only allow you to change the
subtitles from the disc menu or pop-up menu. Press
[TOP MENU] or [DISC MENU / POP-UP MENU] to
display the disc menu or pop-up menu.
• If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.
• During playback of the secondary video, the primary
subtitle setting is not available except when there is
no subtitle for the secondary video.
5) Press [INFO ] to remove the information display.
Note
• For some DivX® files, time search may not function.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Switching Audio Soundtrack
Switching Camera Angles
EN
Some BD and DVD contain multiple audio streams. Those
are often in different audio languages or audio formats.
For BD, available audio varies depending on “Blu-ray Disc
Audio” setting. Refer to page 39 for more information.
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles. You can
change the camera angle if available on the disc.
1) During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2) Use [K / L] to select your desired angle.
1) During playback, press [AUDIO] repeatedly to
display “Primary” or “Secondary”.
“Primary”
: Sets the audio for the primary video.
Angle
1 / 5
“Secondary” : Sets the audio for the secondary video.
2) Use [K / L] to select your desired audio stream
3) Press [ANGLE] to exit.
channel.
Primary
2
English Dolby Digital Multi
• For “Secondary”, use [s / B] to switch between
current audio setting and “Off”.
3) Press [AUDIO] repeatedly to exit.
1) During playback, press [AUDIO].
2) Use [K / L] to select your desired audio stream
channel.
Audio
2
English Dolby Digital Multi
3) Press [AUDIO] to exit.
Note
• The secondary audio will not be output when the
secondary video is not displayed or when “Blu-ray
Disc Audio” is set to “Primary Audio Only”. (For some
BD, secondary audio will be output even when
secondary video is off.)
• The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
• [AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
• You can check the selected audio stream in the
information display. To call up the information
display, press [INFO ] during playback.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
NETFLIX OPERATIONS
With this unit, you can watch movies and TV episodes streamed instantly from Netflix via the Internet.
In order to use this feature, you must visit the following website on your PC and become a Netflix member.
netflix.com/Philips
Before Activating the Connection to
Netflix
After creating a Netflix account at netflix.com/Philips, follow
the following procedure before activating the connection to
Netflix.
Note
• Netflix is available only in the United States.
• You cannot create a Netflix account on this unit.
• If newer version of software is required, software
upgrade screen may appear after selecting
“NETFLIX” in step 2.
(For software upgrade, refer to “Software Upgrade”
1) Connect this unit to the Internet.
2) Set up the necessary network connection settings.
• You can deactivate the connection to Netflix by
• The screen image of Netflix may change after
upgrading the firmware.
• For questions regarding the Netflix service, visit
netflix.com/Help.
Activating the Connection to Netflix
• When you contact the Netflix customer service, you
may be asked for the ESN number, which is a serial
number to identify this unit by Netflix. You can check
the ESN number on the bottom of the “Deactivation”
In order to watch movies and TV episodes streamed
instantly from Netflix via the Internet, you must activate
the connection between this unit and your Netflix
account.
screen. (Refer to page 41.
)
1) Press [ (home)] to access the home menu.
2) Use [K / L] to select “NETFLIX”, then press [OK].
• Netflix welcome screen will appear.
Watching Streaming Movies
After you set up the connection to Netflix, you can browse
the instant Queue and watch movies on your TV.
• For the first time only, “Network Service Disclaimer”
screen will appear. After confirming the content, use
[s / B] to select “Agree”, then press [OK].
1) Press [ (home)] to access the home menu.
2) Use [K / L] to select “NETFLIX”, then press [OK].
• The instant Queue will appear.
3) Use [K / L] to select “yes - activate instant
streaming from Netflix”, then press [OK].
• Activation screen with the activation code will appear.
3) Use [s / B] to select the desired movie or TV
episode, then press [B (play)] to start playback.
4) On your PC, visit netflix.com/activate and log into
your account.
• The entry screen of activation code will appear on
your PC screen.
5) Enter the activation code which is displayed on the
TV screen.
• After loading, playback of the selected movie or TV
episode will start.
• To stop the playback, press [C (stop)].
• To go back to the instant Queue, press [RED].
• To go back to the home menu, press [ (home)].
• The instant Queue will appear.
About the Instant Queue
The connection to Netflix is successfully made.
• To browse the instant Queue and watch movies, skip
to step 3 in “Watching Streaming Movies” on page 34.
• Instant Queue is the list of movies and TV episodes
you add on the Netflix website. (netflix.com)
You can manage the movies and TV episodes in your
instant Queue from the Netflix website on your PC.
• You cannot add movies or TV episodes to your
instant Queue on this unit.
• You can remove movies or TV episodes from the
instant Queue on this unit.
Note
• The picture quality differs depending on the speed
of your Internet connection at the time of loading.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
ENJOYING THE INTERNET RADIO WITH vTuner
With this unit, you can enjoy Internet radio with vTuner via the Internet.
In order to listen to Internet radio, you must connect this unit to the Internet.
EN
For the network connection, refer to “Network Connection with LAN” on page 18.
4) In the station / folder list, use [K / L] to select the
Internet Radio Playback
desired station, then press [OK].
After you set up the network connection, follow the
following procedure to listen to Internet radio.
• After loading, playback of the selected station will
start.
• If you select a folder, use [K / L] to select the desired
station in the next hierarchy, then press [OK].
• To stop playback , press [C (stop)].
• To go back to the previous or next hierarchy, press
[s] or [B].
• To start playback of the previous / next station in the
list during playback, press [S (previous)] or
[T (next)].
1) Press [ (home)] to access the home menu.
2) Use [K / L] to select “vTuner”, then press [OK].
• Category list will appear.
• For the first time only, “Network Service Disclaimer”
screen will appear. After confirming the content, use
[s / B] to select “Agree”, then press [OK].
3) In the category list, use [K / L] to select the desired
category, then press [OK].
e.g.) Location
BD-Player
vTuner
|
... Nevada
|
8
vTuner
45
All Stations
ROCK 300
Recently Played
Favorites
FM Radio 2700
AAAA Radio
ABC Public
XYZ Radio
Location
Genre
New Stations
Most Popular Stations
Get access code
Reset
Recently Played
AAAA FM
ROCK 300
CCCC Rock
Favorite
Page up
• Station / folder list of selected category will appear.
• For “Location” and “Genre”, use [K / L] to select the
desired location or genre after selecting the category,
then press [OK].
5) Press [TOP MENU] to return to the category list or
press [ (home)] to exit.
Note
• This unit cannot play back stations with audio format
other than MP3 and WMA.
“Recently Played” : List of stations which are recently
played
• For some stations, playback is not available even if
the audio format is displayed as MP3 or WMA.
• Internet radio service may not be fully available with
narrowband Internet connection. (e.g. 56k modem)
When listening to Internet radio, use broadband
Internet connection. (For details, contact your
Internet service provider.)
“Favorites”
: List of your favorite radio stations
“My Added
Stations”
: List of stations which are added
on vTuner website
(This category will appear only
after you add stations on vTuner
website. )
• Depending on the bit rate of a station or the network
environment, it may take a while to complete
loading the station or playback may not be available.
• The streaming audio may be interrupted during
playback, when the vTuner server is busy.
• Some stations cannot be displayed in the list,
depending on the network environment.
• If the loading time of a station exceeds 3 minutes,
the loading will be canceled.
“Location”
“Genre”
: List of stations categorized by
location
: List of stations categorized by
genre
“New Stations” : List of new stations
“Most Popular
Stations”
: List of popular stations
• The order of station / folder in the list depends on
the information from vTuner server and may change
without notice.
“Get access
code”
: Displays the access code, which
will be required when creating a
vTuner account on your PC
“Reset”
: Removes all stations / folders in
“Recently Played”, “Favorites” and
“My Added Stations”
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
ENJOYING THE INTERNET RADIO WITH vTuner
Guide to the Playback Screen
Remove from Favorite List
e.g.) Location
11
1
2) Use [K / L] to select “Favorites”, then press [OK].
3) Use [K / L] to select the station you want to remove
from “Favorites”, then press [GREEN].
• Confirmation message will appear.
Nevada
vTuner
|
...
|
45
All Stations
111.FM
10
9
ROCK 300
FM Radio 2700
AAAA Radio
ABC Public
XYZ Radio
AAAA FM
2
4) Use [s / B] to select “Yes”, then press [OK].
• The selected station is removed from “Favorites”
folder.
MP3 01:23:45
111.FM
3
4
5
8
Remove Favorite?
7
CCCC Rock
Press ‘Yes’ to remove from Favorites.
Favorite
Page up
Yes
No
6
5) Press [TOP MENU] to return to the category list or
press [ (home)] to exit.
1) Number of stations / folders in the current hierarchy
2) Image
3) Elapsed playing time of the current station
4) Current station / folder name
5) Audio format of the current station
6) Color key (RED / GREEN / BLUE / YELLOW button)
guide
7) Station / folder list
8) Folder icon
9) Station icon
10) Playback status
11) Directory
Add Stations on the vTuner Website
On the vTuner website, you can add stations which are not
in the vTuner station list.
To add stations, you must visit
account with the access code for this unit.
2) Use[K / L] to select “Get access code”, then press
[OK].
• The access code for this unit will be displayed.
Please take a note of the access code.
(This access code will be required when creating a
vTuner account.)
Add to Favorite List
You can add your favorite stations to “Favorites” in the
category list. To add your favorite stations, follow the
following procedure.
and create your vTuner account.
• Follow the instructions given by the PC screen.
4) Add stations by following the instructions given by
the PC screen.
2) Use [K / L] to select the station you want to add to
“Favorites”, then press [GREEN].
• The stations will be added to “My Added Stations”.
• The selected station is added to “Favorites” folder.
• Confirmation message will appear.
Reset the Station List
You can remove all stations / folders in “Recently Played”,
“Favorites” and “My Added Stations”.
• If you select a folder, use [K / L] to select the desired
station in the next hierarchy, then press [GREEN].
3) Press [OK].
Favorite Added
Please push 'OK'.
2) Use [K / L] to select “Reset”, then press [OK].
3) Use [K / L] to select “Yes”, then press [OK].
• All stations / folders in “Recently Played”, “Favorites”
and “My Added Stations” are removed.
4) Press [TOP MENU] to return to the category list or
press [ (home)] to exit.
OK
4) Press [TOP MENU] to return to the category list or
press [ (home)] to exit.
Note
• You can also add your favorite stations to “Favorites”
on your PC. To add your favorite stations on your PC,
vTuner account with the access code, which you can
• You can change folder names or order of lists in your
vTuner page on the Internet.
• “My_Favorite” folder will appear after you add a
station to “Favorites” on this unit. (Your favorite
station will also be added to “My_Favorite” folder.)
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
In the settings menu, you can customize the various kinds of settings as you prefer.
Refer to the following instruction to navigate through the settings menus.
1) Press [ (home)] to access the home menu.
EN
2) Use [K / L] to select “Settings”, then press [OK].
3) Use [K / L] to select “Advanced Setup”, then press [OK].
4) Use [K / L] to move the highlight up and down in the list.
Options of the highlighted item will be displayed in the list on the right whenever available.
5) To make a selection or to access options of an item, select the desired item, then press [OK].
6) Press [ (home)] to exit.
Refer to the following table for the types of settings you can customize.
Settings with (*) can be accessed from the “Quick Setup” also.
The item highlighted in gray is the default setting.
Category
Menus / Options
Default
Ceština
Dansk
Deutsch
English
Español
Description
Language Audio
Sets the audio language for BD-video,
DVD-video or AVCHD playback.
• If you select “Default”, the disc’s
original language will be in effect.
Norsk
Polski
Português
Русский
suomi
Svenska
Türkçe
Français
Italiano
Magyar
Nederlands
Subtitle
Off
Ceština
Dansk
Sets the subtitle language for BD-
video, DVD-video or AVCHD playback.
Norsk
Polski
Deutsch
English
Español
Português
Русский
suomi
Svenska
Türkçe
Français
Italiano
Magyar
Nederlands
Disc Menu
Sets the language for disc menu.
Ceština
Dansk
Norsk
Polski
Deutsch
Português
Русский
suomi
Svenska
Türkçe
English
Español
Français
Italiano
Magyar
Nederlands
Player Menu*
Auto (XXXX)
English
Español
Français
Sets the language for player menu
(OSD menu)
“Auto”:
Activates the Get & Set Menu
Language function. Refer to page 48.
• “Auto” is available only when
“EasyLink (HDMI CEC)” is set to “On”.
• Inside the parenthesis next to “Auto”
will be the current selected
language.
Video
Output
TV Shape*
more information. 16:9 Widescreen
4:3 Letter Box
Sets the aspect ratio of the playback
image to fit your TV.
16:9 Squeeze
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Category
Menus / Options
Description
Video
Output
HDMI Video
HDMI 1080p/24
Auto
Off
“Auto”:
Outputs the picture in 1080p/24
(1080 progressive with 24 frames per
second) when it meets all the
conditions listed below:
• This feature is available
only when the display
device is connected by
an HDMI cable.
more information.
• The video resolution and the frame
rate of the material is 1080p/24 .
• “HDMI Video Resolution” setting is
set to “1080p”.
• The display device supports the
1080p/24 output.
“Off”:
• Outputs the picture in 60p.
(60 frames per second, progressive)
HDMI Video Resolution* Auto
Sets the resolution of the video signal
being output from the HDMI OUT jack.
• The selected resolution must also be
supported by your TV monitor.
• This feature is available
only when the display
device is connected by
an HDMI cable.
480p
720p
1080i
1080p
more information.
HDMI Deep Color
Auto
Off
Reduces the posterization effect of
the playback picture.
• This feature is available
only when the display
device is connected by
an HDMI cable, and
when it supports Deep
Color feature.
“Auto”:
Reduces the posterization effect by
automatically outputting the 12 bit
color whenever the unit recognizes
the connected display device
supports Deep Color feature.
“Off”:
Outputs the standard 8 bit color.
Component Output 480i
480p
Sets the resolution for the component
output picture.
• The selected resolution must also be
supported by your TV monitor.
• Refer also to your TV’s manual.
• If you have selected the resolution
not supported by your TV by mistake
and the picture gets disturbed, press
720p
1080i
With regard to the
DVD-video with a copy
protection, the resolution
will be set to 480p
regardless of the setting
here.
If 480p output is not
available, 480i will be
output.
and hold
[B
(play)] on the front
panel for 5 seconds to change the
setting back to its default.
• When HDMI cable is connected, only
“480i” and the resolution selected in
the “HDMI Video Resolution” will be
available.
De-interlacing Mode Auto
Video
“Auto”:
Automatically detects the film or the
video content, and appropriately
converts it.
“Video”:
Selects when the picture is distorted
when using “Auto”.
Black Level
On
Off
Adjust the brightness to compensate
for ambient room light.
HD Noise Reduction On
Off
Reduces the noise of the playback
picture.
“On”:
Activates the Noise Reduction.
“Off”:
Deactivates the Noise Reduction.
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Category
Menus / Options
Description
Audio
Night Mode
Auto
On
Off
Compresses the range between soft
and loud sounds.
EN
“Auto”:
Night Mode will be activated
automatically when Dolby TrueHD
audio is played back.
“On”:
Activates the Night Mode.
“Off”:
Deactivates the Night Mode.
Down Sampling
On
Off
Sets the sampling rate for outputting
the PCM audio from the digital output
(coaxial).
“On”:
Over 96 kHz PCM audio will be down
sampled at 48 kHz.
“Off”:
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to 96 kHz
are output as LPCM signals.
Virtual Surround
On
Off
Select “On” to enjoy the stereophonic
virtual space through your existing 2
channel stereo system during
playback of BD-video or DVD-video.
Blu-ray Disc Audio
Mix Audio Output
Primary Audio Only
“Mix Audio Output”:
The audio for the secondary video and
the interactive application will be
output together with the audio for the
primary video.
“Primary Audio Only”:
Only the audio for the primary video
will be output.
When playing back a BD-video which
only contains the primary audio, the
audio output will be the same case as
the “Primary Audio Only” even if the
“Blu-ray Disc Audio” is set to “Mix
Audio Output”.
HDMI Audio
HDMI Normal
PCM
Off
Sets the audio format for the sound
output from the HDMI OUT jack.
• This feature is
available only when
the display device is
connected by an
HDMI cable.
more information.
Digital Out
Bitstream
PCM
Sets the audio format for the sound
output from the DIGITAL OUT
(COAXIAL) jack.
• When HDMI cable is
connected, make
sure “HDMI Audio”
setting is set to “Off”
to change the
“Digital Out”
setting.
more information.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Category
Parental
Menus / Options
Description
Rating Level
All
Sets the rating level for the disc
playback.
• Refer to
more
8 [Adult]
to
1 [Kid Safe]
information.
New PIN
Sets the new password for the
“Parental” setting.
Others
Auto Standby
On
Off
Sets whether to turn off the unit (to
the standby mode) automatically
after 25 minutes of no action since
the screen saver is activated.
• If the screen saver is off, the unit
will be turned off after 30 minutes
if no action.
Front Panel Brightness Bright
Dim
Sets the brightness of the front panel
display.
When “Auto” is selected, the front
panel display automatically goes dim
during playback.
Auto
Screen Saver
On
Off
Sets whether to activate the screen
saver after 5 minutes of no action on
the unit.
Slide Show Transition Cut In/Out
Fade In/Out
Sets the visual effect for the slide
show transition mode.
“Cut In/Out”:
The pictures will cut in and out
sharply as playback progresses.
“Fade In/Out”:
The pictures will fade in and out as
playback progresses.
DivX® VOD
Registration Code Your registration code is :
This menu item provides you with
the DivX® VOD registration code. The
DivX® registration code is required
when downloading the DivX® VOD
files from the Internet. To learn more
about DivX® VOD, visit
cccccccccc
To learn more visit
Deactivation Code Your deactivation code is :
cccccccc
This menu item provides you with
the DivX® VOD deactivation code.
The DivX® deactivation code is
required when re-downloading the
DivX® VOD files from the Internet
after deactivating. To learn more
about DivX® VOD, visit
To learn more visit
Deactivation
Yes
No
This menu deactivates the DivX®
VOD files and provides you with new
registration code and deactivation
code in order to download the DivX®
VOD files from the Internet.
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Category
Menus / Options
Description
Others
EasyLink (HDMI CEC) On
Sets whether to utilize the
EasyLink (HDMI CEC) function.
EasyLink (HDMI CEC) function
allows your PHILIPS brand
EasyLink TV to act in conjunction
with this unit or vice versa.
EN
• This feature is
Off
available only when
the display device is
connected with an
HDMI cable, and
when it supports
EasyLink (HDMI
CEC) feature.
more information.
Network Connection Connection
for more
Perform the network connection
test. After you change the IP
address or DNS setting, always
perform this test.
information.
Enable(Easy)
If you select “Enable(Easy)”,
Connection test will automatically
start.
Enable
(Custom)
IP Address Auto(DHCP)
Set the IP address.
Setting
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual
IP Address
Subnet Mask
Default
Gateway
DNS
Setting
Auto(DHCP)
Manual
Set the DNS setting.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Primary DNS
Secondary
DNS
Proxy
Setting
Do Not Use
Use
Set the proxy server.
In most cases, you can connect to
the Internet without using proxy
server.
Proxy
Address
Proxy Port
Connection Auto
Set the connection speed.
Speed
In most cases, you can connect to
the Internet without making any
changes to the default setting.
10BASE Half
10BASE Full
100BASE Half
100BASE Full
Allow
BD-Live
Setting
You can restrict Internet access
when BD-Live functions are used.
Limited Allow
Prohibit
Network Status
You can check the current status of
the network setting.
Disable
Yes
No
Deactivate the network
connection.
Disclaimer
Netflix
Displays the network service
disclaimer.
Deactivate the connection to
Netflix.
Deactivation Yes
No
Software Upgrade
more information.
Disc
Yes
No
Set the disc upgrade.
You can upgrade the firmware
version by using the disc.
To download the latest firmware
version, please visit
Network
Upgrade
Yes
No
Set the network upgrade.
You can upgrade the firmware
version by connecting this unit to
the Internet.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Category
Menus / Options
Description
Settings
Yes
No
“Yes”:
Resets all the settings, except for
“Parental” and “Network
Connection”, in “Settings” to the
factory default.
“No”:
Does not perform the initialization.
Format SD Yes
“Yes”:
Re-format SD card.
“No”:
Card
No
Does not perform the initialization.
Local
Storage
Player
Yes
No
“Yes”:
Re-format local storage (Player)
used for BD-Java.
“No”:
Does not perform the initialization.
SD Card
Yes
No
“Yes”:
Re-format local storage (SD card)
used for BD-Java.
“No”:
Does not perform the initialization.
Network
Settings
Yes
No
“Yes”:
Initialize network settings.
“No”:
Does not perform the initialization.
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Actual Output Resolution by Media:
TV Shape
Media
BD
EN
Setting in
the “HDMI
Video
Source
“Advanced
Setup”
home A “Settings”
A
A “Video Output” A “TV Shape”
480i/60
720p/60 1080i/60 720p/24 1080p/24
Resolution”
Use this feature to adjust the aspect ratio of the video
source which is different from your TV’s ratio to fit your TV
monitor without distorting the picture. Descriptions of
each setting are as follows:
480p
720p
480p/60
480p/60
480p/60
480p/60
480p/60
720p/60
720p/60 720p/60 720p/60 720p/60
1080i
1080i/60 1080i/60 1080i/60 1080i/60 1080i/60
Video Your
1080p/24
Option
Description
1080p
1080p/60 1080p/60 1080p/60 1080p/60
(*1)
source
TV
or 60
The highest resolution supported by your display device
will be in effect automatically.
4:3 Letter Box
To enjoy 16:9
picture on 4:3
monitor:
16:9 picture is
scaled down until
both sides of the
picture fits the 4:3
TV.
To enjoy 16:9
picture on 4:3
monitor:
Both sides of the
picture are
Auto
(*1)
To output the video in 24 Hz, the connected display device must
support 24 Hz output, and “HDMI 1080p/24” should be set to “Auto”.
Otherwise, the image will be output in 60 Hz.
Photo OSD-only
viewing viewing
Media
DVD
AVCHD
DivX®
Source
Setting in the
“HDMI Video
Resolution”
60, 30,
other
4:3 Pan & Scan
480i/60
1080p/24
480p/60
4:3
480p
720p
480p/60
480p/60
480p/60
480p/60
720p/60 720p/60 720p/60 720p/60 720p/60
1080i/60 1080i/60 1080i/60 1080i/60 1080i/60
16:9
1080i
trimmed to fit the
4:3 TV without
distorting the
aspect ratio of the
picture.
1080p
1080p/60 1080p/60 1080p/60 1080p/60 1080p/60
The highest resolution supported by your display
device will be in effect automatically.
Auto
• When HDMI cable is connected, only “480i” and the
resolution selected in the “HDMI Video Resolution” will
be available for the “Component Output”.
• Composite video out (VIDEO OUT) can only output
480i/60.
• For AVCHD, outputting the video in 24 Hz (1080p/24) is
not available.
16:9 Widescreen
16:9 Squeeze
To enjoy 16:9
picture on 16:9
monitor:
Select this setting
when you want to
enjoy 16:9 picture
on the 16:9 TV.
To enjoy 4:3
picture on 16:9
monitor:
Use this setting to
display 4:3 picture
on the 16:9 TV
without distorting
the aspect ratio of
the picture.
16:9
Note
• The selected resolution must also be supported by
your display device.
• If your TV and the unit is connected by a DVI cable
and if you select “Auto”, “480p” will be in effect
automatically.
4:3
• Pressing [B (play)] on the front panel for 5 seconds
changes the setting back to its default.
(“Component Output” setting will also be reset to
default (480i).)
• Refer also to your TV’s manual.
HDMI Video Resolution
“Advanced
Setup”
“Video
Output”
“HDMI
Video”
“HDMIVideo
Resolution”
home
A
“Settings”
A
A
A
A
Set the resolution of the video signal being output from
the HDMI OUT jack.
You can select the desired “HDMI Video Resolution”
among the settings listed below:
“Auto”,“480p”,“720p”,“1080i”,“1080p”
• When you make a selection, the TV monitor temporarily
goes blank and then comes back again. If it does not,
press [HDMI] to change the resolution or press and hold
[B (play)] on the front panel for 5 seconds to change the
setting back to its default.
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
HDMI Audio
home
A
“Settings”
A
“Advanced Setup”
A
“Audio”
A
“HDMI Audio”
Refer to the table below to see which setting you should choose.
“HDMI Audio” setting
A
“HDMI Normal”
“PCM”
“Off”
“Blu-ray Disc Audio” setting “Primary Audio
“Mix Audio
Output”
“Primary Audio
Only”
“Mix Audio
Output”
Regardless
A
Only”
Media
ª
Audio Source
Which audio format can be output depends on the compatibility of the
connected device.
ª
Dolby Digital
or
Dolby Digital
or
Dolby Digital
PCM
or
Mute
Multi PCM
or
Mute
Multi PCM
or
Mute
Multi PCM
or
Mute
Mute
Mute
Dolby Digital Plus
or
Dolby Digital
Dolby Digital
Dolby Digital Plus
or
or
Multi PCM*1
Multi PCM*2
or
Mute
Multi PCM*1
or
Mute
Multi PCM*2
or
Mute
or
Mute
Dolby TrueHD
or
Dolby Digital
Dolby Digital
Dolby TrueHD
or
or
Multi PCM*3
Multi PCM*4
or
Mute
Multi PCM*3
or
Mute
Multi PCM*4
or
Mute
BD-video
or
Mute
Mute
Mute
DTS®
or
PCM
or
Mute
DTS®
or
Multi PCM
or
Mute
DTS®
Multi PCM
or
Mute
Multi PCM
or
Mute
DTS-HD®
or
DTS®
DTS®
DTS-HD®
LPCM
or
or
Multi PCM*1
Multi PCM*5
or
Mute
Multi PCM*1
or
Multi PCM*5
or
or
Mute
Mute
Mute
Mute
Multi PCM
or
Multi PCM
or
Multi PCM
or
Mute
Multi PCM
or
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Dolby Digital
DTS®
LPCM
Dolby Digital, Multi PCM or Mute Multi PCM or Mute
DVD-video
DTS-CD
DTS®, Multi PCM or Mute
2ch PCM or Mute
DTS®, Multi PCM or Mute
Multi PCM or Mute
2ch PCM or Mute
Multi PCM or Mute
DTS®
Dolby Digital
or
Dolby Digital
LPCM
Multi PCM
or
Multi PCM
or
AVCHD
Mute
Mute
Mute
Mute
Multi PCM
or
Mute
Multi PCM
or
Mute
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
“HDMI Audio” setting
A
“HDMI Normal”
“PCM”
“Off”
EN
“Blu-ray Disc Audio” setting “Primary Audio
“Mix Audio
Output”
“Primary Audio
Only”
“Mix Audio
Output”
Regardless
A
Only”
Media
ª
Audio Source
Which audio format can be output depends on the compatibility of the
connected device.
ª
Dolby Digital
or
Multi PCM
or
Mute
Dolby Digital
2ch PCM
or
Mute
DivX®
Mute
2ch PCM
or
2ch PCM
or
MP3 / MP2
PCM
Mute
Mute
Mute
Mute
Audio CD / MP3 /
Windows Media™ Audio
2ch PCM or Mute
2ch PCM or Mute
*1
) Full decoded.
) Only the independent substream is decoded.
) Dolby TrueHD stream is decoded.
) Only the Dolby Digital substream is decoded.
) Only the core substream is decoded.
*2
*3
*4
*5
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the
“Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”.
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Digital Out
home
A
“Settings”
A
“Advanced Setup”
A
“Audio”
A
“Digital Out”
Refer to the table below to see which setting you should choose.
“Digital Out”
“Bitstream”
setting A
“PCM”
“Blu-ray Disc Audio”
“Primary Audio
Only”
“Primary Audio
Only”
“Mix Audio Output”
“Mix Audio Output”
setting A
Media
ª
Audio Source
ª
Dolby Digital
Dolby Digital
Dolby Digital
Dolby Digital
DTS®
Dolby Digital
Dolby Digital
Dolby Digital
DTS®
DownMix 2ch PCM DownMix 2ch PCM
DownMix 2ch PCM*1 DownMix 2ch PCM*2
DownMix 2ch PCM*3 DownMix 2ch PCM*4
DownMix 2ch PCM DownMix 2ch PCM
DownMix 2ch PCM*1 DownMix 2ch PCM*5
Dolby Digital Plus
Dolby TrueHD
DTS®
BD-video
DTS-HD®
LPCM
DTS®
DTS®
DownMix 2ch PCM DownMix 2ch PCM DownMix 2ch PCM DownMix 2ch PCM
Dolby Digital
DTS®
Dolby Digital
DTS®
DownMix 2ch PCM
DownMix 2ch PCM
DVD-video
LPCM
2ch PCM
DTS®
2ch PCM
DownMix 2ch PCM
DTS-CD
AVCHD
DTS®
Dolby Digital
LPCM
Dolby Digital
DownMix 2ch PCM
DownMix 2ch PCM
DownMix 2ch PCM
2ch PCM
DownMix 2ch PCM
Dolby Digital
2ch PCM
Dolby Digital
MP3 / MP2
DivX®
Audio CD / MP3 /
Windows Media™ Audio
PCM
2ch PCM
2ch PCM
*1
) Full decoded.
) Only the independent substream is decoded.
) Dolby TrueHD stream is decoded.
) Only the Dolby Digital substream is decoded.
) Only the core substream is decoded.
*2
*3
*4
*5
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the
“Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”.
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
3) After entering the PIN code, “Rating Level” appears.
(If not, use [K / L] to select “Rating Level”.)
Select desired rating level then press [OK].
Parental
EN
home
A
“Settings”
A
“Advanced Setup”
A
“Parental”
Rating Level
New PIN
All
8 [Adult]
Some BD-video or DVD-video feature a parental lock level.
Playback will stop if the ratings exceed the levels you set, it
will require you to enter a password before the disc will
playback. This feature prevents your children from viewing
inappropriate material.
7
6
5
4
3
2
1) With “Parental” selected in the “Advanced Setup”
menu, press [OK].
RATING EXPLANATIONS
Language
Video Output
Audio
Rating Level
New PIN
All
• Parental Control is inactive; all discs
can playback.
8 [Adult]
• DVD software of any grades (adult /
general / children) can be played
back.
Parental
Others
7
6
• [NC-17] No one under 17 admitted.
• [R] Restricted; under 17 requires
accompanying parent or adult
guardian.
• [PGR] Parental Guidance
Recommended.
• [PG13] Unsuitable for children
under 13.
• [PG] Parental Guidance suggested.
• [G] General Audience.
• Suitable for children.
If a PIN code has already been set, proceed to step
5
4
If you want to change the PIN code, proceed to
If you forget the PIN code, proceed to step 2-d).
2-a) Enter 4 digit PIN code using
3
2
[Number buttons].
Enter new PIN.
1 [Kid Safe]
To cancel parental lock temporarily
Some discs allow you to cancel the parental lock
temporarily. With those discs, the message below will
appear when you try to play them back.
“Please enter your PIN to unblock content”
Follow the instruction which appears on the TV screen to
cancel the parental lock. After entering the PIN code,
“Rating Level” appears.
• “4737” cannot be used.
• Press [RED] to return to the previous screen.
2-b) Enter 4 digit PIN code using
[Number buttons].
Select desired rating level, then press [OK].
Enter your PIN.
[OK]. Enter the new PIN code.
2-d) Enter “4737”. Current PIN code and the “Parental”
2-a) to create a new PIN code.
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
EasyLink (HDMI CEC)
Network Connection
Set up the network connection settings in order to use the
BD-Live function, Netflix feature, vTuner service or
network upgrade function.
“Advanced
Setup”
“EasyLink
(HDMI CEC)”
home A “Settings”
A
A
“Others”
A
EasyLink (HDMI CEC) function allows your TV (limited to
PHILIPS brand EasyLink TV) to act in conjunction with this
unit, or vice versa.
Connection Test
“Advanced
Setup”
“Network
Connection”
“Connection
Test”
home
A
“Settings”
A
A
“Others”
A
A
When “EasyLink (HDMI CEC)” setting is set to “On”,
functions listed below will be available.
One Touch Play
After you made IP address / DNS settings or when a LAN
cable is connected, always perform the connection test to
check if the connection is correctly made.
When this unit is turned on, the TV also is turned on and
the appropriate external input channel will be selected
automatically. The appropriate external input channel
can also be selected on your TV automatically when you
press [B (play)], [S (previous)], [T (next)],
[Number buttons], [ (home)], [INFO ],
[TOP MENU], or [DISC MENU / POP-UP MENU] when
the unit’s power is on.
1) Use [K / L] to select “Settings” in the home menu,
then press [OK].
2) Use [K / L] to select “Advanced Setup”, then press
[OK].
3) Use [K / L] to select “Others”, then press [OK].
4) Use [K / L] to select “Network Connection”, then
Standby
press [OK].
When you press and hold [Q (standby-on)] for 2
seconds, it turns off the power of the TV first and then
turns off the power of this unit also.
System Information
5) Use [K / L] to select “Connection Test”, then press
[OK].
Connection test will start automatically and the test result
will appear right after the connection test finishes.
• “Testing...” : The test is in progress.
• “Pass” : Connection test is successfully completed.
• “Fail” : Connection test failed. Check the connection
settings.
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and
automatically sets the same language as the player
menu language (OSD menu language) for this unit.
languages.
Press [OK] to go to the list of network status confirmation
screen.
• This feature is available only when “Auto” is selected in
the “Player Menu” in the settings menu.
IP Address
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
then press 'OK'.
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
6) Press [OK] to go back to the previous screen, or
press [ (home)] to go back to the home menu.
Note
• If the connection test passes, you are ready to use
BD-Live function, Netflix feature, vTuner service or
network upgrade function using the Internet
without making any extra settings.
• If the connection test fails, you may need to change
the MAC address settings of your router. You can
check the MAC address of this unit on “Network
Status” screen (refer to page 51).
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
If you select “Manual”, follow the following
instruction to set the IP address and DNS.
Enable(Easy)
EN
4-a) IP address setting screen will appear. Enter IP
address, subnet mask and default gateway with
cursor buttons and number buttons.
“Advanced
Setup”
“Network
Connection”
“Enable
(Easy)”
home A“Settings” A
A
“Others”
A
A
Network settings are set to the following settings initially.
(In most cases, you can connect to the Internet without
making any changes to the default settings.)
IP Address Setting
IP Address
- IP Address Setting
- DNS Setting
- Proxy Setting
- Connection Speed
- BD-Live Setting
Auto(DHCP)
Auto(DHCP)
Do Not Use
Auto
Subnet Mask
Default Gateway
Allow
Clear
OK
If you want to set the network settings back to the default
settings as above (except “BD-Live Setting”), follow the
procedure below.
• Enter the IP address number after checking the
specifications of your router.
• If the IP address number is unknown, check the
IP address number of other devices. (e.g. PC
connected via LAN cable) and assign a different
number from those of other devices.
2) Use [K / L] to select “Enable(Easy)”, then press [OK].
• The unit will start the connection test automatically
and the test result will appear right after the test
finishes.
After you enter all correctly, press [OK] to go to the
DNS setting screen.
4-b) DNS setting screen will appear. Enter primary DNS
and secondary DNS with cursor buttons and
number buttons.
• After the connection test finishes, press [OK] to go to
network status confirmation screen.
3) Press [OK] to activate the network settings and set
the network connection automatically. [ (home)]
to go back to the home menu.
DNS Setting
Primary DNS
Secondary DNS
Note
• The setting of “BD-Live Setting” will not be set back
to the default, even if you follow the procedure.
Clear
OK
• Enter the numbers instructed by your Internet
provider.
• If the number is unknown, check the number of
other devices (e.g. PC connected via LAN cable)
and assign the same number.
Enable(Custom)
“Advanced
Setup”
“Network
Connection”
“Enable
(Custom)”
home A“Settings” A
A
“Others”
A
A
4-c) After you enter all correctly, press [OK].
• Confirmation message will appear. Select “Yes”
to complete the settings.
In following cases, select “Enable(Custom)” to set each
setting as necessary.
- When connection test failed with the setting of
“Enable(Easy)”.
- When instructed by your Internet service provider to
make specific settings in accordance with your
network environment.
IP Address
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Is Setting OK?
Yes
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
IP Address Setting / DNS Setting
No
5) Press [BACK U] to go back to the previous screen,
or press [ (home)] to go back to the home menu.
2) Use [K / L] to select “Enable(Custom)”, then press
[OK].
3) Use [K / L] to select “IP Address Setting”, then press
[OK].
4) Use [K / L] to select the desired setting, then press
[OK].
“Auto(DHCP)”
: If your router has DHCP server
function, select “Auto(DHCP)”.
“Manual”
: If your router does not have DHCP
server function, select “Manual”.
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
After you enter all correctly, press [YELLOW] to go to
the proxy port setting screen.
Note
4-b) Enter proxy port number with number buttons.
• The range of input number is between 0 and 255.
• If you enter a number larger than 255, the number
will automatically be 255.
Proxy Setting
Proxy Port
x
• The manually entered number will be saved even if
you change the setting to “Auto(DHCP)”.
Clear
OK
• When you enter a wrong number, press [RED] to
cancel. (the number will be back to “0”.)
• If you want to enter 1 or 2 digit number in one cell,
press [B] to move on to the next cell.
• If the entered IP address or the default gateway or
primary DNS number is same as the default setting,
IP address setting will be set to “Auto(DHCP)”. (The
manually entered number will be saved).
• When IP address setting is set to “Manual”, the
setting of DNS setting will automatically be “Manual”
and when IP address setting is set to “Auto(DHCP)”,
you can set either “Auto(DHCP)” or “Manual” for DNS
setting.
4-c) After you enter all correctly, Press [YELLOW].
• Confirmation message will appear. Select “Yes”
to complete the settings.
Proxy Address
Proxy Port
xxxxxxxxxxxxxxx
xxxxx
Is Setting OK?
Yes
No
5) Press [BACK U] to go back to the previous screen,
Proxy Setting
or press [ (home)] to go back to the home menu.
Note
• The range of input number for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked
and not be able to use depending on your network
environment.
2) Use [K / L] to select “Enable(Custom)”, then press
[OK].
3) Use [K / L] to select “Proxy Setting”, then press
[OK].
4) Use [K / L] to select the desired setting, then press
• If the proxy address is entered with blank only, proxy
server setting will be set to “Do Not Use”.
[OK].
• For default settings, select “Do Not Use”.
• If you need to change the proxy setting as instructed
by your Internet service provider to set the
designated proxy address and port, select “Use”.
If you select “Use”, follow the following instructions
to set the proxy address and proxy port.
4-a) Proxy address setting screen will appear.
Enter proxy address.
• The keyboard screen will appear.
Proxy Setting
Proxy Address
xxxxxxxx_
1
a
k
u
2
b
l
3
c
4
d
n
x
5
e
o
y
6
f
7
g
q
.
8
h
r
9
i
0
j
m
w
p
z
s
_
t
v
-
OK
a/A/@
Clear
All Clear
OK
[K / L / s / B] : Move the highlight.
[Number buttons] : Enter number.
[OK] : Enter the highlighted number / word.
*[RED] : Clear the entered number or word.
[GREEN] : Clear all the entered numbers or words.
[BLUE] : Switch between abc, ABC and @!?
*[YELLOW] : Set the entered number or word.
* These buttons can be used in other network settings.
50 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Connection Speed
BD-Live Setting
You can set connection speed as your preference. (The
default setting is “Auto”.)
You can limit the Internet access from the BD-Live
functions. (The default setting is “Allow”.)
EN
2) Use [K / L] to select “Enable(Custom)”, then press
2) Use [K / L] to select “Enable(Custom)”, then press
[OK].
[OK].
3) Use [K / L] to select “Connection Speed”, then press 3) Use [K / L] to select “BD-Live Setting”, then press
[OK].
[OK].
4) Use [K / L] to select the desired setting, then press
4) Use [K / L] to select the desired setting, then press
[OK].
[OK].
“Auto”:
“Allow”:
Set the appropriate connection speed automatically, in
accordance with your network environment.
Internet access is permitted from all BD-Live contents.
“Limited Allow”:
“10BASE Half”:
Set the connection speed to “10BASE Half”.
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
“Prohibit”:
“10BASE Full”:
Set the connection speed to “10BASE Full”.
Internet access is prohibited from all BD-Live contents.
“100BASE Half”:
5) Press [BACK U] to go back to the previous screen,
Set the connection speed to “100BASE Half”.
“100BASE Full”:
Set the connection speed to “100BASE Full”.
or press [ (home)] to go back to the home menu.
Network Status
5) Press [BACK U] to go back to the previous screen,
You can check the status of network settings.
or press [ (home)] to go back to the home menu.
Note
• Choose a connection speed in accordance with your
network environment.
2) Use [K / L] to select “Enable(Custom)”, then press
[OK].
• The network connection may be disabled depending
on the device, when the settings are changed.
3) Use [K / L] to select “Network Status”, then press
[OK].
• Network setting list will be displayed.
• MAC address of this unit will be displayed in the list.
4) Press [BACK U] to go back to the previous screen,
or press [ (home)] to go back to the home menu.
Disable
“Advanced
Setup”
“Network
Connection”
home A“Settings” A
A
“Others”
A
A“Disable”
Deactivate all the network connection and settings.
2) Use [K / L] to select “Disable”, then press [OK].
3) Use [K / L] to select “Yes”, then press [OK].
4) Press [BACK U] to go back to the previous screen,
or press [ (home)] to go back to the home menu.
Note
• The network connection can be reactivated by
setting the network connection to “Enable(Easy)” or
“Enable(Custom)”.
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Note
Software Upgrade
• In order to upgrade the software via the Internet, you
must connect the unit to the Internet and set up
necessary settings.
Disc Upgrade
“Advanced
home A“Settings” A
Setup”
“Software
Upgrade”
“Disc
Upgrade”
A
“Others”
A
A
• Please do not unplug the AC power cord or LAN
cable while executing the “Network Upgrade”.
• All settings will remain the same even if you upgrade
the software version.
• The disc tray will open automatically after upgrading
finishes. This is not a malfunction.
• The version of Netflix will also be upgraded if newer
version of Netflix is available when upgrading the
firmware.
You can upgrade the software by using disc.
2) Use [K / L] to select “Software Upgrade”, then
press [OK].
3) Use [K / L] to select “Disc Upgrade”, then press
[OK].
4) Use [K / L] to select “Yes”, then press [OK].
5) Disc tray will open automatically.
• Insert the disc for software upgrade and then press
[A (open/close)].
6) After completing loading disc, confirmation
message will appear. Use [s / B] to select “Yes” and
press [OK] to start upgrading.
• It may take a while to complete the upgrading.
7) After the disc upgrade finishes, this unit will restart
and open the disc tray automatically. Remove the
disc.
Reset to Factory Default
Initialize the setting, SD Memory Card or network setting.
1) Use [K / L] to select “Settings” in the home menu,
then press [OK].
2) Use [K / L] to select “Factory Default”, then press
[OK].
3) Use [K / L] to select the desired setting, then press
[OK].
Note
“Settings”:
the latest firmware version.
All the settings except for the “Parental” and “Network
Connection” setting will be reset to default.
“Format SD Card” (Available only when an SD
Memory Card is inserted):
• Please do not unplug the AC power cord while
executing the “Disc Upgrade”.
• All settings will remain the same even if you upgrade
the firmware version.
• The version of Netflix will also be upgraded if newer
version of Netflix is available when upgrading the
firmware.
Initialize the SD Memory Card.
“Local Storage”:
Local storage for Player or SD card (Available only when
an SD Memory Card is inserted) used for BD-Java will be
initialized.
“Network Settings”:
Reset the network setting to the default.
4) Use [K / L] to select “Yes”, then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
Network Upgrade
“Advanced
Setup”
“Software
Upgrade”
“Network
Upgrade”
home A“Settings” A
A
“Others”
A
A
5) Press [BACK U] to go back to the previous screen,
You can upgrade the software by connecting the unit to
the Internet.
or press [ (home)] to go back to the home menu.
2) Use [K / L] to select “Software Upgrade”, then press
[OK].
Note
• Do not remove the SD Memory Card while executing
the “Format SD Card” or “Local Storage” (SD card). It
will damage the card.
3) Use [K / L] to select “Network Upgrade”, then press
[OK].
• “Format SD Card” and “Local Storage” (SD card) are
not available when a Blu-ray Disc is in the unit.
4) Use [K / L] to select “Yes”, then press [OK].
• This unit will then start checking for the latest
firmware version.
5) Confirmation message will appear.
Use [s / B] to select “Yes”, then press [OK].
• The unit will start downloading the latest firmware
version.
6) When the download completes, confirmation
message will appear. Press [OK].
• The unit will start upgrading the firmware version.
• It may take a while to complete the upgrading.
7) After upgrading finishes, this unit will restart and
open the disc tray automatically.
52 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Tip
No reaction to the remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
EN
Insert new batteries in the remote control.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution using [HDMI] .
Press and hold [B (play)] on the front panel for 5 seconds to change the
setting back to its default.
No video signal on the display
device.
No audio / video signal on the
display device via HDMI cable.
No high-definition video signal on
the TV.
If the unit is connected to the unauthorized display device with an HDMI
cable, the audio / video signal may not be output.
Does the disc contain high-definition video? High-definition video is not
available when the disc does not contain it.
Does the TV support high-definition video? High-definition video is not
available when the TV does not support it.
No audio signal from the
loudspeakers of the TV.
Assign the audio input of the TV to the corresponding video input.
No audio signal from the
loudspeakers of the audio system.
Turn on the audio system.
Set the audio system to the correct external input.
Increase the volume level of the audio system.
Cannot play back a disc.
Make sure that the product supports the disc.
Check the region code of the disc. This unit supports following region codes.
-BD : “A”
-DVD : “ALL” or “1” for BDP5150/F7 (USA / Canada)
“ALL” or “4” for BDP5150/F8 (Mexico)
For DVD-RW/-R, make sure that the disc is finalized.
Clean the disc.
SD Memory Card cannot be read.
The format of the card does not match that accepted by this unit or the card
is not compatible.
Cannot play back JPEG files from a
disc.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Cannot play back MP3 files from a
disc.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Make sure that the bit rate of the MP3 files is between 112 and 320 kbps.
Make sure that the sample rate of the MP3 files is 32 kHz, 44.1 kHz or 48 kHz.
Cannot play back Windows Media™ Make sure that the sample rate of the Windows Media™ Audio files is
Audio files from a disc. 44.1 kHz or 48 kHz.
Cannot play back DivX® files from a Make sure that the file extension is .avi, .AVI, .divx or .DIVX.
disc.
The operation is not possible.
in the upper right hand corner
of the TV screen.
Buttons do not work or the unit
stops responding.
To completely reset the unit, press and hold [Q (standby-on)] on the front
panel for 10 seconds to shut down the unit or unplug the AC cord from the
AC outlet for 5-10 seconds.
Cannot find a JPEG file.
Make sure that the selected group (folder) does not contain more than
9,999 files for DVD, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Make sure that the selected folder does not contain more than 9,999 files for
DVD, and 999 files for CD.
Cannot find an MP3 and
Windows Media™ Audio file.
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or .WMA
for Windows Media™ Audio.
Error message appears when I
select “Auto” in the “Player Menu”.
Make sure that the unit is connected to the PHILIPS brand EasyLink TV and
the “EasyLink (HDMI CEC)” is set to “On”.
This error message may appear when your TV’s OSD language is not
supported by this unit.
EN 53
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Tip
Cannot connect to the network.
Check if the LAN cable connection is properly made.
Turn on the modem or broadband router.
Check the network settings.
Check if the broadband router and/or modem is correctly connected.
Check the “BD-Live Setting”.
Cannot connect to the network
while my PC is connected to the
network.
Check the content of your Internet service contract to see if your Internet
Service Provider prevents multiple terminals connecting at the same time.
The capacity of the SD card
decreased.
The data may be written to the SD card when a BD-video that supports the
virtual package is used and an SD card is in the slot.
MPEG-2 video and audio on the SD MPEG-2 is noncompliant on this unit.
card cannot be played back.
The contents of the card cannot be The card is not compatible or the contents on the card may be damaged.
read.
Turn off and then turn the unit on again.
Cannot use the BD-Live function or Incert an SD card with enough space(1GB or more).
download of data does not perform
properly.
Check if an SD card is correctly inserted.
Cannot play back BD-video(BD-
ROM Profile 2.0).
Insert an SD card(1GB or more) which is formatted on this unit.
Some discs with BD-Live function require memory when playing back the
content.
Do not remove the card during playback.
Cannot use Netflix feature.
Netflix is available only in the United States.
Check if the network connection is properly made.
Visit netflix.com/Philips on your PC and become a Netflix member.
Visit netflix.com on your PC.
Adding movies or TV episodes on this unit is not available.
Check the speed of your Internet connection.
Cannot add movies or TV episodes
to the instant Queue.
The picture quality of Netflix
streaming movie is poor.
Even though the speed of the
Internet connection improves
during playback, the picture quality
of Netflix streaming movie does not
improve.
The picture quality does not change during playback.
The picture quality differs depending on the speed of Internet connection
at the time of loading.
Cannot play back Internet radio.
Check if the network connection is properly made.
Check the firewall setting of the modem or router.
For some stations, playback is not available on this unit.
Cannot play back the Internet radio The station is busy or no longer active.
station in my favorite list.
Try again later.
The audio of Internet radio station
interrupted.
The quality of the Internet radio
audio is poor or noise occurs during
playback of Internet station.
vTuner server, station or the Internet connection is busy.
The bit rate of the station is high.
The bit rate of the station is low.
54 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
DNS Server
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
A server which translates Internet domain names into IP
addresses.
EN
Dolby Digital
The system to compress digital sound developed by Dolby
Laboratories. It offers you sound of stereo (2ch) or multi-
channel audio.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV screen
is almost twice as wide as it is high).
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel
AVCHD
AVCHD is a new format for high definition video camcorders surround sound output.
which can record and play high-resolution HD images.
Dolby TrueHD
Dolby TrueHD is a lossless coding technology developed
BD-Live
BD-Live is a BD-video (BD-ROM version 2 Profile 2.0) which for next generation optical discs. Blu-ray Disc supports
contains new functions (e.g. Internet connection), in
addition to the BONUSVIEW function.
7.1 multi-channel surround sound output.
DTS® (Digital Theater System)
DTS® is a multi channel surround sound system. You can
Blu-ray Disc is a next generation optical video disc which is enjoy movie dynamic and realistic sound like movie
Blu-ray Disc (BD)
capable of storing much more data than a conventional
DVD. The large capacity makes it possible to benefit from
the features such as high-definition videos, multi-channel
surround sounds, interactive menus and so on.
theater. DTS surround sound technologies were
developed by DTS, Inc.
DTS-HD®
DTS-HD® is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc supports 7.1 multi-channel surround sound
output.
Chapter
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
See also “Title”.
Gateway
Component Video Output
IP address of the electronic devices (such as router) which
Each signal of luminance (Y) and component (PB/CB, PR/CR) provide Internet access.
is independent to output so that you can experience
picture color as it is.
HDMI (High Definition Multimedia Interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
Also, due to compatibility with progressive video (525p/
480p), you can experience higher-density picture than that
in interlace (525i/480i).
Digital Audio
Hub
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also “Sampling
A device used for connecting multiple device to the
network.
IP Address
A set of numbers which are assigned to devices
participating in a computer network.
DivX®
JPEG (Joint Photographic Experts Group)
DivX® is a codec (compression/decompression) that can
compress pictures to a very small amount of data. The
software can compress video data from almost any
devices to the size that can be sent on the Internet without
compromising visual quality of the pictures.
JPEG is a method of compressing still picture files. You can
copy JPEG files on CD-RW/-R, DVD-RW/-R, BD-RE/-R or SD
Memory Card from a computer and play back the files on
this unit.
EN 55
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
LAN (Local Area Network)
Subnet Mask
A group of computer networks covering a small area like a A mask which is used to determine what subnet an IP
company, school or home.
address belongs to.
Local Storage
Title
A storage area of sub contents for playing virtual packages A collection of chapters on BD-video or DVD-video. See
on BD-video.
also “Chapter”.
MP3 (MPEG audio layer 3)
Track
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R, DVD-RW/-R, BD-RE/-R or SD Memory
Card from the computer and play back the files on this
unit.
Audio CD uses tracks to divide up the content of a disc.
The BD-video or DVD-video equivalent is called a chapter.
See also “Chapter”.
Virtual Package
Netflix
The function which copies data to other media (local
storage) from the Internet and play the secondary video,
secondary audio and the subtitle at the same time. The
method of the playback varies depending on discs.
Netflix is online movie rental service, offering online
streaming to customers in the United States.
PCM (Pulse Code Modulation)
vTuner
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a lot
of data compared to formats such as Dolby Digital and
MPEG audio. For compatibility with digital audio recorders
(CD, MD and DAT) and AV amplifiers with digital inputs,
this unit can convert Dolby Digital and MPEG audio to
vTuner is a database service of Internet radio.
vTuner enables users to access various kinds of Internet
radio stations through its database.
Windows Media™ Audio
Windows Media™ Audio is the audio compressing
technology developed by Microsoft. You can copy
Windows Media™ Audio files on CD-RW/-R, DVD-RW/-R or
SD Memory Card from a computer and play them back on
this unit.
Proxy Server
Proxy server is a server which acts as an intermediary
between a workstation user and the Internet to ensure
security.
x.v.Color
Region Code
“x.v.Color” is a promotion name given to the products that
have the capability to realize a wide color space based on
the xvYCC specifications and is a trademark of Sony
Corporation.
Regions associate discs and players with particular areas of
the world. This unit will only play back discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Router
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling in
one second defines as sampling frequency. The higher the
rate, the better the sound quality.
56 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
Signal System
Power requirements
Power consumption
NTSC Color
120 V AC, 60 Hz
20 W (standby: 0.5 W)
EN
Dimensions (width x height x depth) 17.1 x 2.0 x 8.5 inches (435 x 50 x 215 mm)
Weight
5.07 lbs. (2.3 kg)
Operating temperature
Operating humidity
41°F (5°C) to 104°F (40°C)
Less than 80 % (no condensation)
Terminals
SD card slot
slot x 1
Audio output (Analog)
RCA jack x 2
L/R: 2 Vrms (output impedance: more than 1kΩ)
Video output
RCA jack x 1
1 Vp-p (75Ω)
Component video output
RCA jack x 3
Y: 1 Vp-p (75Ω)
PB/CB: 700 mVp-p (75Ω)
PR/CR: 700 mVp-p (75Ω)
Audio output (Digital)
RCA jack x 1
500 mVp-p (75Ω)
HDMI output
HDMI jack x 1
Video: 480p, 720p, 1080i, 1080p/Audio
10BASE-T / 100BASE-TX
LAN terminal
Note
• The specifications and design of this product are subject to change without notice.
EN 57
Download from Www.Somanuals.com. All Manuals Search And Download.
NETWORK SERVICE DISCLAIMER
Network Service Disclaimer
Content and services made available through this product are transmitted by third
parties by means of networks and transmission facilities over which Company has no
control and third party services may be terminated or interrupted at any time, and
Company makes no representation or warranty that any content or service will
remain available for any period of time. Without limiting the generality of this
disclaimer, Company expressly disclaims any responsibility for any interruption or
suspension of any content or service made available through this product. Company
is not responsible for customer service related to the content and services. Any
question or request for service relating to the content or services should be made
directly to the respective content and service providers.
THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT
ARE PROVIDED“AS IS.”COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO
PROVIDED, FOR ANY PURPOSE WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY
WARRANTIES, EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION,WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ACCURACY,
VALIDITY,TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR
SERVICE MADE AVAILABLE THROUGH THIS PRODUCT.
IN NO EVENT SHALL COMPANY BE LIABLE FOR, ANY DAMAGES,WHETHER ARISING IN
CONTRACT OR TORT, INCLUDING WITHOUT LIMITATION, ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, LOST PROFITS, ATTORNEY
FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION
WITH, ANY CONTENT (OR ANY INFORMATION CONTAINED THEREIN) OR SERVICE
PROVIDED TO THE USER OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
All content and services accessible through this product belong to third parties and
are protected by copyright, patent, trademark and/or other intellectual property
rights. Such content and services are provided solely for the User’s personal
noncommercial use. User may not use any content or services in a manner that has
not been authorized by the content owner or service provider.Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service
provider, you may not modify, copy, republish, upload, post, transmit, translate, sell,
create derivative works, exploit, or distribute in any manner or medium any content
or services made available through this product.
58 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE (1) YEAR LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
a part that has been modified without written permission,
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
EN
WHO IS COVERED:
This product is warranted to the original purchaser or the per-
son receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
This Limited Warranty does not cover:
Shipping charges to return defective product.
•
Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
•
•
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or
most comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The Company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company’s property. When a
refund is given, your product becomes the company’s property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Damage or claims for products not being available for use, or
for lost data or lost software.
Damage from mishandled shipments or transit accidents when
returning product.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•
•
•
•
•
•
Product lost in shipment and no signature verification receipt
can be provided.
Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact Customer Care Center at:
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all
requirements can result in delay.
1-866-309-0866
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The Company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or any non-Philips product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.
Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how long
an implied warranty lasts, so the above limitations or exclusions
may not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product,
(b) to damage caused by service performed by anyone other
than an Authorized Service Location, (c) to a product or
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
EN 59
Download from Www.Somanuals.com. All Manuals Search And Download.
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura,
Huixquilucan Edo. de México C.P. 52787
Meet Philips at the Internet
BDP5150/F7
BDP5150/F8
CLASS 1
LASER PRODUCT
ENERGIA
BDP5150
120 V ~ 60 Hz 20 W
Comercializado por :
IMPORTADOR:
P&F Mexicana, S.A. DE C.V.
Sojitz Mexicana, S.A. de C.V.
Av. Paseo de las Palmas no. 239-302
Col. Lomas de Chapultepec, c.p. 11000
México, D.F.
52 (55) 5202 - 7222
EXPORTADOR :
País de Origen :
FUNAI ELECTRIC CO. L.T.D.
CHINA
GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
Printed in China
JpnYN-0952/F7-3
1VMN28513★★★★★
E5PG0UD
Download from Www.Somanuals.com. All Manuals Search And Download.
|