Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome
42PFL7409D/30
47PFL7409D/30
32PFL5609D/30
42PFL5609D/30
47PFL5609D/30
*non-contractual image
EN User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Connect devices
Back connectors
25
25
26
26
27
28
29
Contents
Side connectors
Connect a computer
Assign devices
Use Philips EasyLink
Use a Kensington lock
1 Notice
2
3
2 Important
8 Product information
9 Troubleshooting
10 Index
30
32
34
3 Your product
Side controls and indicators
Remote control
5
5
5
4 Use your product
Switch yourTV on/off or to standby
Switch channels
7
7
7
8
8
Watch connected devices
AdjustTV volume
5 Use your product in digital mode
Understand the information banner
Install channels
9
9
9
Test digital reception
10
11
11
12
14
14
Change the order of stored channels
Set your preferences
Control access to digital channels
Set up your favourite channels
Use the Electronic Programme Guide
6 Use your product in analogue mode15
AccessTV menus
15
15
Change picture and sound settings
Create and use lists of favourite channels 18
Use timers
19
19
20
20
Use child control
Use subtitles
Use theTV clock
View photos, play music and watch video
from a USB storage device
Use Scenea to display a picture asTV
wallpaper
21
22
23
24
24
24
Update theTV software
ChangeTV preferences
Start aTV demo
Reset theTV to factory settings
EN
1
Download from Www.Somanuals.com. All Manuals Search And Download.
procedures not recommended or authorised in
this manual, shall void the warranty.
1 Notice
Compliance with EMF
2009 © Koninklijke Philips Electronics N.V. All
rights reserved.
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
Speciꢀcations are subject to change without
notice.Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those speciꢀed herein, conꢀrmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips conꢀrms that if its products are
handled properly for their intended use, they
are safe to use according to scientiꢀc evidence
available today.
Philips cannot be held responsible either for any
errors in the content of this document or for
any problems as a result of the content in this
document. Errors reported to Philips will be
corrected and published on the Philips support
website as soon as possible.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
Copyright
Pixel characteristics
All other registered and unregistered
trademarks are the property of their respective
owners.
This LCD product has a high number of
colour pixels.Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen.This is a structural property of
the display (within common industry standards)
and is not a malfunction.
® Kensington and Micro Saver are registered
US trademarks of ACCO World Corporation
with issued registrations and pending
applications in other countries throughout the
world.
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and ofꢀcial repair shops. Failure
to do so shall void any warranty, stated or
implied.
VESA, FDMI and theVESA Mounting Compliant
logo are trademarks of theVideo Electronics
Standards Association.
Portions of this software are copyright ©The
FreeType Project (www.freetype.org).
Any operation expressly prohibited in
this manual, any adjustments, or assembly
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Avoid force coming onto power
plugs. Loose power plugs can cause
arcing or ꢀre.
2 Important
•
Risk of injury or damage to the TV!
•
Read and understand all instructions before you
use yourTV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Two people are required to lift and
carry a TV that weighs more than
25 kg.
When stand mounting the TV, use
only the supplied stand. Secure the
stand to the TV tightly. Place the
TV on a ꢁat, level surface that can
support the combined weight of the
TV and the stand.
When wall mounting the TV, use
only a wall mount that can support
the weight of the TV. Secure the wall
mount to a wall that can support the
combined weight of the TV and wall
mount. Koninklijke Philips Electronics
N.V. bears no responsibility for
improper wall mounting that result in
accident, injury or damage.
•
Safety
•
Risk of electric shock or ꢀre!
•
Never expose the TV to rain or
water. Never place liquid containers,
such as vases, near the TV. If
liquids are spilt on or into the TV,
disconnect the TV from the power
outlet immediately. Contact Philips
Consumer Care to have the TV
checked before use.
•
•
Never place the TV, remote control
or batteries near naked ꢁames or
other heat sources, including direct
sunlight.
•
Risk of injury to children! Follow these
precautions to prevent the TV from
toppling over and causing injury to
children:
To prevent the spread of ꢀre, keep
candles or other ꢁames away from
the TV, remote control and batteries
at all times.
•
Never place the TV on a surface
covered by a cloth or other material
that can be pulled away.
•
•
Ensure that no part of the TV hangs
over the edge of the surface.
Never place the TV on tall furniture
(such as a bookcase) without
anchoring both the furniture and TV
to the wall or a suitable support.
Educate children about the dangers
of climbing on furniture to reach the
TV.
•
•
Never insert objects into the
ventilation slots or other openings on
the TV.
When the TV is swivelled ensure
that no strain is exerted on the
power cord. Strain on the power
cord can loosen connections and
cause arcing.
•
•
•
Risk of overheating! Never install the TV
in a conꢀned space. Always leave a space
of at least 4 inches or 10 cm around the
TV for ventilation. Ensure curtains or
other objects never cover the ventilation
slots on the TV.
Risk of damage to the TV! Before you
connect the TV to the power outlet,
ensure that the power voltage matches
•
Risk of short circuit or ꢀre!
•
Never expose the remote control or
batteries to rain, water or excessive
heat.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
the value printed on the back of the TV.
Never connect the TV to the power
outlet if the voltage is different.
Risk of injury, ꢀre or power cord damage!
Never place the TV or any objects on the
power cord.
To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
When you disconnect the power cord,
always pull the plug, never the cable.
Disconnect the TV from the power outlet
and aerial before lightning storms. During
lightning storms, never touch any part of
the TV, power cord or aerial cable.
Risk of hearing damage! Avoid using
earphones or headphones at high
volumes or for prolonged periods of time.
If the TV is transported in temperatures
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Recycling
•
•
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheeled bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
•
•
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences for the
environment and human health.
•
•
Screen care
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
•
•
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
•
•
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
3 Your product
Congratulations on your purchase, and
welcome to Philips!To fully beneꢀt from the
support that Philips offers; register your product
1
2
28
3
27
26
25
4
5
6
7
Side controls and indicators
24
4
8
9
3
10
23
11
12
13
14
15
2
1
16
17
18
a
POWER: Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
22
21
b P/CH +/-: Switches to the next or
previous channel.
19
20
c
SOURCE: Selects connected devices.
d VOLUME +/-: Increases or decreases
volume.
a
(Standby-On)
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
•
•
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
b DIGITAL MENU
s 0-9 (Numeric buttons)
Accesses or exits the digital menu.
Selects a channel or setting.
c
SOURCE
t
u
v
w
PICTURE (Smart picture)
Selects connected devices.
Launches the picture menu.
d SUBTITLE
Enables or disables subtitles.
SOUND (Smart Sound)
Launches the sound menu.
e DUAL
Switches Stereo and Nicam Stereo to
+/- (Volume +/-)
Increases or decreases volume.
Mono. Selects ꢀrst language (Dual I)
or second language (Dual II) in bilingual
programmes.
BACK A/CH
Returns to a previous screen.
Toggles between the current channel and
the last viewed channel.
f
g
(Home)
Toggles the home menu on or off.
x
GUIDE
OPTIONS
Accesses options relating to the current
activity or selection.
Toggles the Electronic Programme
Guide (EPG) on or off. Enabled on digital
channels only.
h OK
Conꢀrms an entry or selection.
y SCENEA (Wallpaper)
Displays wallpaper on your TV screen.
i
(Navigation buttons)
z DEMO
Navigates through the menus.
Toggles the demonstration menu on or
off.
j
INFO
Displays programme information, if
available.
{ TV
Switches back to the antenna source from
EasyLink mode.
k
l
m
n
o
p
(Backward)
Searches backward.
| ANALOG/DIGITAL
Selects between analog or digital mode.
(Forward)
Searches forward.
(Play/Pause)
Starts, pauses or resumes disc play.
(Record)
Starts or stops video recording.
(Stop)
Stops disc play.
(Mute)
Mutes or restores audio output.
q CH +/- (Channel +/-)
Switches to the next or previous channel.
r
FORMAT
Selects a picture format.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch channels
4 Use your product
This section helps you perform basic operations.
Switch yourTV on/off or to
standby
•
•
Press
BACK A/CH on the remote
control to return to the previously
viewed channel.
Press CH +/- on the remote control or
P/CH +/- on the side of the TV.
Press OK to use the channel matrix.
Enter a channel number using the
Numeric buttons.
To switch on
•
If the standby indicator is off, press
POWER at the side of the TV.
•
•
•
If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
•
Note
Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
• When you use a favourite list, you can only
select those channels in the list (see ‘Select a
favourite list’ on page 18).
To switch off
•
Press POWER at the side of the TV.
» The standby indicator switches off.
Tip
• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Watch connected devices
AdjustTV volume
Note
• For easy access, add new devices to the home
menu before selecting them.
Use the source button
To increase or decrease volume
•
•
Press
+/-.
1 Press SOURCE.
Press VOLUME +/- on the side of the TV.
» The source list appears.
To mute or unmute sound
2 Press or to select the connected
•
•
Press to mute the sound.
device.
Press again to restore the sound.
3 Press OK to watch the connected device.
Use the home menu
Note
• You can add new devices to the home menu
for easy access.
1 Press (Home).
» The home menu appears.
2 Press
to select the device.
3 Press OK to watch the connected device
on your TV.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Install channels
5 Use your product
in digital mode
The ꢀrst time you set up yourTV, you are
prompted to select a menu language and to
installTV and digital radio channels (if available).
Understand the information
banner
Check forTV channels or radio
stations
When you select a digital channel, an
You can check for the availability of TV
channels or radio stations that have been
launched by the broadcaster after you have
installed the TV.
information banner is displayed at the top of
the screen. The banner disappears after a few
seconds. The information banner provides
useful information on the current programme
on the screen such as channel name, program
title, start time of programme, and so on.
Note
• If you are not in the digital mode, press
ANALOG/DIGITAL.
1080p
1
000 CCTV-2 News
16:35
6
16:50
8
16:48
9
1 Press DIGITAL MENU.
2
3
4
5
7
2 Select [Installation] > [Service List] and
press .
3 Press or to select [View TV
Channels] or [Listen to Radio Stations].
4 If new services are available, press to
enter into the list of services and press
or to move through the list.
a Resolution: Indicates resolution type, for
5 Press the to return to the previous
example: 1080p.
menu or press DIGITAL MENU to exit.
b Favourite list indication: Indicated by a tick
if you have added this programme to your
favourite list setting.
Add new channels or stations to your
list
You can search for new TV channels or radio
stations that have been launched by the
broadcaster after the initial installation.
c Channel number: In the format “###”.
d Channel name
e Programme name
f Programme start time
Note
g Programme time progress bar: Displays
• If you are not in the digital mode, press
time left indicator bar.
ANALOG/DIGITAL.
h Programme end time
1 Press DIGITAL MENU.
i Clock: Current time
2 Select [Installation] > [Service Setup]
and press .
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press to Add new services and press
OK to activate the installation.
4 Press OK to store the services.
5 Press to return to the previous menu
» A search begins.Any new channels are
added to the channel list menu.The
percentage of the installation that has
been completed and the number of
channels found is displayed.
or press DIGITAL MENU to exit.
Install digital channels manually
You can manually install digital services by
keying the channel number.
Note
Note
• To cancel installation, press OK.
• If you are not in the digital mode, press
ANALOG/DIGITAL.
4 When the search is complete, press OK
to accept the new services.
1 Press DIGITAL MENU.
5 Press to return to the previous menu
2 Select [Installation] > [Service Setup] >
or press DIGITAL MENU to exit.
[Manually install services] and press .
3 Press and to select the channel
Reinstall all channels
number and to select [Start Scan].
4 Press OK to start the search.
This option lets you reinstall all the digital TV
channels and radio stations.
5 Press to return to the previous menu
or press the blue button to exit.
Note
• If you are not in the digital mode, press
ANALOG/DIGITAL.
Test digital reception
If using digital broadcasts, you can check the
signal quality and strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
Caution
• Reinstalling services will overwrite all your
previously stored channels.
1 Press the numeric buttons (0-9) or CH
+/- to switch to the digital channel you
wish to test the signal of.
1 Press DIGITAL MENU.
2 Select [Installation] > [Service Setup] >
[Reinstall services] and press .
2 Press DIGITAL MENU
3 Press OK to start the installation.
» A search is for digital services is
started.The services are stored
automatically.
3 Select [Installation] > [Test Reception] >
[Frequency].
» The frequency of the current channel
is displayed.
Note
4 Press to select [Network Name].
» The name of the broadcast network is
displayed.
• To cancel installation, press OK.
5 Press to select [Signal Quality].
» An indicator bar displays the quality
level of theTV signal.
When the search is complete, the menu
indicates the number of digital services
found.You should see a list of stored
channels on the left panel.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press to select [Signal Strength].
» An indicator bar displays the strength
level of theTV signal.
Set your preferences
Set your language
You can select your preferred language for
system menu and subtitle.
7 Press to return to the previous menu
or press DIGITAL MENU to exit.
Tip
• If the signal strength is poor, consider adjusting
or checking the connection of your antenna.
Contact a professional antenna installer for
best results.
Note
• If you are not in the digital mode, press
ANALOG/DIGITAL.
1 Press DIGITAL MENU.
2 Select [Preferences] > [Language] and
Change the order of stored
channels
press .
3 Press or to select System or Subtitle
and press .
You can change the order of the digital
channels and radio stations that you have
stored.
4 Press or to select the language and
press OK to conꢀrm.
5 Press to return to the previous menu
or press the DIGITAL MENU to exit.
Note
• If you are not in the digital mode, press
Menu options for language:
ANALOG/DIGITAL.
System: Selects the menu language.
Subtitle: Selects your preferred subtitle
language.
1 Press DIGITAL MENU.
2 Select [Installation] > [Service List] >
[Rearrange Services] and press .
Set your subtitle mode
3 Press to select Uninstall services and
press or to select the services you
wish to uninstall.
Note
4 Press OK to uninstall the service
• If you are not in the digital mode, press
temporarily.
ANALOG/DIGITAL.
5 Press to return to the previous menu
and to select [Move services].
1 Press DIGITAL MENU.
6 Press or to highlight the service and
2 Select [Preferences] > [Subtitle Mode]
OK to select.
and press .
7 Press or to move the service to the
3 Press to select [On].
order you want and press OK to conꢀrm.
4 Press to return to the previous menu
8 Repeat the above steps to move other
or press DIGITAL MENU to exit.
services.
9 Press to return to the previous menu
or press DIGITAL MENU to exit.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Set your digital audio output
Note
• If [Enable Pin Protection] is Off, select On to
Note
proceed.
• If you are not in the digital mode, press
ANALOG/DIGITAL.
3 Enter the default PIN code “1234” with
the numeric buttons (0-9).
You can access the menu now using the
default PIN code.
1 Press DIGITAL MENU.
2 Select [Preferences] > [Digital Audio
4 Press or to highlight [On] and press
Output] and press .
OK to turn on PIN code protection.
3 Press or to select [AC3] or [PCM]
output.
Change your PIN code
4 Press to return to the previous menu
or press DIGITAL MENU to exit.
1 Turn on PIN code protection.
2 Press to select [Change PIN code] and
Digital Audio Output
press OK.
3 Enter your PIN code using the numeric
AC3: A compressed digital audio format
that supports 5.1 channel.
buttons (0-9) on the remote control.
4 Enter a new code when prompted to
PCM: Pulse Code Modulation (PCM) is a
way of transmitting uncompressed digital
audio. PCM is used by Audio CDs.
enter your new PIN code.
5 Re-enter the new code when prompted
6 Press to return to the previous menu
Tip
or press DIGITAL MENU to exit.
• If your DVD or home theatre system supports
AC3 decoding, select AC3. Otherwise, select
PCM.
Control access to digital
channels
You can restrict access to the digital channels by
blocking them with an access PIN code.
Turn on PIN code protection
Note
• If you are not in the digital mode, press
ANALOG/DIGITAL.
1 Press DIGITAL MENU.
2 Select [Access Restrictions] and press .
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Add all services to a favourite list
Set up your favourite
channels
1 Press DIGITAL MENU.
2 Select [Favorites] > list number (List 1 to
You can create a list of up to four of your
favouriteTV channels and radio stations.
List 4) > [Add all services]. and press .
3 Select [Yes] and press OK to conꢀrm
adding all the services.
Note
4 Press to return to the previous menu
• If you are not in the digital mode, press
or press DIGITAL MENU to exit.
ANALOG/DIGITAL.
Remove all services from a favourite
list
1 Press DIGITAL MENU.
2 Select [Favorites] > list number (List 1 to
1 Press DIGITAL MENU.
List 4) and press OK.
2 Select [Favorites] > list number (List 1 to
3 Press to enter the Favorites setting
List 4) > [Remove all services] and press
options.
.
3 Select [Yes] and press OK to conꢀrm
Change the name of a favourite list
removing all the services.
1 Press DIGITAL MENU.
2 Select [Favorites] > list number (List 1 to
List 4) > [Name].
3 Press or to move the cursor over the
character of the name list and press
to scroll through the character list.
or
4 Press OK to conꢀrm.
5 Select [Yes] and press OK to conꢀrm.
SelectTV channels and radio stations
1 Press DIGITAL MENU.
2 Select [Favorites] > list number (List 1 to
List 4)] > [Select TV channels] or [Select
radio stations].
3 Press or to navigate the list of
channels or stations to select.
4 Press OK to select.
An ‘X’ marks the check box to indicate
the channel or station has been selected.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press to return to the previous menu
or press DIGITAL MENU to exit.
Use the Electronic
Programme Guide
EPG is an on-screen guide available for digital
channels. EPG allows you to:
•
View a list of digital programmes being
broadcast
•
•
•
•
View upcoming programmes
Group programmes by genre
Set reminders when programmes start
Set up preferred EPG channels
Switch on EPG
1 When watching TV, press GUIDE.
» The EPG planner screen appears
displaying information about the
scheduled programmes.
Tip
• Press GUIDE to switch between EPG and
channel grid.
Use EPG
1 When watching TV, press GUIDE.
» The EPG planner screen appears.
2 Press or to change channels or
or
to [Now] or [Next].
3 Press GUIDE to exit the EPG menu.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[Setup]Accesses menus to adjust
picture, sound and other TV settings.
[Add new device]Adds new devices
to the home menu for easy access.
6 Use your product
in analogue mode
3 Press OK to conꢀrm your choice.
4 Press (Home) to exit.
AccessTV menus
Remove devices from the home menu
If a device is no longer connected to the TV,
remove it from the home menu.
Menus help you to install channels, change
picture and sound settings and access other
features.
1 Press (Home).
Note
» The home menu appears.
• If you are not in the analogue mode, press
2 Press
to select a device.
3 Press OPTIONS.
ANALOG/DIGITAL.
» The [Remove] menu appears.
Access the home menu
The home menu gives you easy access to
connected devices, picture and sound settings
as well as other useful features.
4 Press OK to remove the icon.
» The selected icon is removed from the
home menu.
Change picture and sound
settings
Change picture and sound settings to suit your
preferences.You can apply pre-deꢀned settings
or change settings manually.
1 Press (Home).
» The home menu appears.
Use settings assistant
Use the settings assistant to guide you through
the best picture settings.
1 Press (Home).
Add new device
Setup
» The home menu appears.
2 Press
to select [Setup] > [Picture]
> [Settings assistant] > [Start].
3 Press OK.
» The [Settings assistant] menu appears.
Follow the on-screen instructions to
choose your preferred picture settings.
2 Press
to select an option.
•
[Watch TV]Switches to TV mode.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[HD Natural Motion]Reduces ꢀeld
and line ꢁicker to display movement
smoothly. You can switch HDNM on
or off.
[100Hz LCD]Not available in all
models. Sets the TV refresh rate to a
maximum of 100Hz to provide superior
motion sharpness, better black level,
high contrast with a ꢁicker-free, quiet
image and a larger viewing angle.
[Advance sharpness]Not available
in all models. Enables superior
sharpness, especially on lines and
contours in the picture.
Use smart picture
Use smart picture to apply pre-deꢀned
picture settings.
1 Press PICTURE.
» The [Smart picture] menu appears.
2 Press
to select from the following
smart picture settings:
•
[Personal]Lists customised personal
picture settings.
•
•
•
[Vivid]Maximises picture settings.
[Standard]Adjusts picture settings to suit
most environments and types of video.
[Movie]Applies picture settings
ideally suited for movie viewing.
[Game]Applies picture settings
maximised for fast-moving games.
[Energy saving]Applies low-energy
picture settings.
•
•
[Dynamic contrast]Automatically
enhances contrast in an image.
[Dynamic backlight]Adjusts the
brightness of the TV backlight to
match lighting conditions.
•
•
•
•
•
[MPEG artifact reduction] Not
available in all models. Smoothes out
transitions on digital pictures. You
can switch this feature on or off.
[Colour enhancement]Makes
colours more vivid and improves the
resolution of details in bright colours.
You can switch this feature on or off.
[PC mode]Adjusts picture settings
when a PC is connected to the TV.
[Light sensor]Dynamically adjusts
picture settings to match lighting
conditions.
[Picture format]Changes the picture
format.
[Horizontal shift]Adjusts the picture
horizontally for PC-VGA or HD input.
[Vertical shift]Adjusts the picture
vertically for PC-VGA or HD input.
Manually adjust picture settings
1 Press (Home).
2 Press
to select [Setup] >
[Picture].
» The [Picture] menu appears.
•
•
3 Press
to select from the following
settings and adjust:
•
[Smart picture]Accesses pre-deꢀned
smart picture settings.
•
•
•
•
[Contrast]Adjusts the intensity of
bright areas, keeping dark areas
unchanged.
•
[Brightness]Adjusts the intensity and
details of dark areas.
•
•
[Colour]Adjusts colour saturation.
[Hue]Compensates colour variations
in NTSC encoded transmissions.
[Sharpness]Adjusts the level of
sharpness in image details.
Change picture format
•
•
•
[Noise reduction]Filters and reduces
noise in an image.
[Colour temperature]Introduces
more orange tones ([Warm]) or
blue tones ([Cool]) to the picture.
[Pixel Precise HD] / [Pixel Plus
HD] Available in selected models.
Fine-tunes each pixel to match
surrounding pixels. This produces a
brilliant, high-deꢀnition image.
1 Press
FORMAT.
» A picture format bar appears.
•
2 Press
to select a picture format.
» The selected picture format is
previewed.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Summary of picture formats
Use smart sound
The following picture settings can be
conꢀgured.
Use smart sound to apply pre-deꢀned sound
settings.
Note
• Depending on the format of the picture
source, some picture settings are not available.
1 Press SOUND.
» The [Smart sound] menu appears.
[Super zoom](Not for HD
and PC mode.) Removes
the black bars on the side
of 4:3 broadcasts. There is
minimal distortion.
[4:3]Shows the classic 4:3
format.
2 Press
to select a smart sound setting:
•
•
[Standard]Adjusts sound settings to
suit most environments and types of
audio.
[News]Applies sound settings ideally
suited for spoken audio, such as the
news.
[Subtitle zoom] (Not
for HD and PC mode.)
Displays 4:3 pictures over
the full area of the screen,
with sub-titles visible. Part
of the top of the picture is
clipped off.
[Movie expand 14:9](Not
for HD and PC mode.)
Scales 4:3 format to 14:9.
•
•
[Movie]Applies sound settings ideally
suited for movies.
[Personal]Applies the settings that
were customised in the sound menu.
Adjust sound settings
1 Press (Home).
2 Press
to select [Setup] > [Sound].
[Movie expand 16:9](Not
for HD and PC mode.)
Scales 4:3 format to 16:9.
» The [Sound] menu appears.
3 Press
to select and adjust:
•
[Smart sound]Accesses pre-deꢀned
smart sound settings.
[Wide screen]Stretches
the classic 4:3 format to
16:9.
•
•
•
•
[Bass]Adjusts the bass level.
[Treble]Adjusts the treble level.
[Volume]Adjusts the volume.
[Balance]Adjusts the balance of the
right and left speakers to best suit
your listening position.
[TV speakers]Sets the TV speakers
on or off, or outputs sound to
an EasyLink-compliant device.
[EasyLink] must be activated in the
[Preferences] menu to make the
[TV speakers] menu available.
[Surround]Enables spatial sound.
[Headphone volume]Adjusts
headphone volume.
[Unscaled]For HD and PC
mode only, and in selected
models only. Allows
maximum sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
•
resolution to wide screen
mode for best results.
[Auto format](Not for
PC mode.) Enlarges the
picture automatically to
best ꢀt the screen. The
subtitles remain visible.
•
•
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[Auto volume]Automatically
Add a channel to a favourite list
reduces sudden volume changes, for
example, when switching channels.
When enabled, this produces a more
consistent audio volume.
Tip
• View all channels before adding a channel to a
favourite list.
[Delta volume]Corrects volume
differences between TV channels
and connected devices (switch
to your connected device when
adjusting [Delta volume]).
1 When watching TV, switch to the channel
you want to add to a favourite list (see
‘Switch channels’ on page 7).
2 Press OPTIONS.
» The channel options menu appears.
Create and use lists of
favourite channels
You can create lists of your preferredTV
channels and radio stations so that you can ꢀnd
those channels easily.
3 Press
to select [Mark as favourite].
4 Press OK.
5 Select a favourite list to add the channel to.
6 Press OK.
» The channel is added to the favourite
list.
Tip
7 Press
BACK A/CH to exit the channel
• You can create and store up to four favourite
lists on your TV.
options menu.
» The channel grid appears.
Remove a channel from a favourite
list
Select a favourite list
Note
• Select the favourite list to edit, before
removing a channel.
1 When watching TV, press OK.
» The channel grid appears.
1 When watching TV, press OK.
2 Press OPTIONS.
» The channel grid appears.
» The options menu appears.
2 Press
to select a channel.
3 Press OPTIONS.
3 Press
to select [Show favourite
channels].
» The favourite lists appear.
» The channel options menu appears.
4 Press
to select a favourite list or [All].
5 Press OK.
4 Press
to select [Unmark as favourite].
5 Press OK.
» If you selected a favourite list, only
channels in the list appear in the
channel grid; if you selected [All],
all installed channels appear in the
channel grid.
» The channel is removed from the
favourite list.
6 Press
BACK A/CH to exit the channel
options menu.
» The updated channel grid appears,
displaying the current channels in the
favourite list.
6 Press to exit the options menu.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Use timers
2 Select [Setup] > [Features] > [On timer]
> [Activate].
You can set timers to switch theTV on or
switch to standby at a speciꢀed time.
3 Press OK.
4 Press
to set the time and channel.
Tip
Set the time
• To switch off [On timer], select [OFF] in the
1 Press (Home).
[On timer] menu.
2 Select [Setup] > [Features] > [Clock].
3 Press OK.
4 Press
to set the time.
5 Select [Done].
Set or change your PIN code
1 Press (Home).
6 Press OK.
2 Press
to select [Setup] >
[Features] > [Change code].
» The [Change code] menu appears.
Automatically switch theTV to
standby (sleeptimer)
Sleeptimer switches the TV to standby after a
pre-deꢀned period of time.
3 Enter a four-digit PIN using the Numeric
buttons.
•
If you have a PIN, enter your current
PIN.
If you do not have a PIN or if you
have forgotten your PIN, enter
‘0711’.
•
Tip
• You can always switch off your TV earlier or
reset the sleeptimer during the countdown.
4 Enter your PIN again to conꢀrm.
1 Press (Home).
» The home menu appears.
Use child control
2 Press
to select [Setup] >
[Features] > [Sleep timer].
» The [Sleep timer] menu appears.
You can prevent your children from watching
certain programmes or certain channels by
locking theTV controls.
3 Press
to set the sleep time.
» The sleeptimer can be up to 180
minutes in steps of ꢀve minutes. If
set to zero minutes, the sleeptimer is
switched off.
Lock or unlock theTV
Locking the TV prevents your child from
accessing all channels and connected devices.
4 Press OK.
1 Press (Home).
» TheTV switches to standby after the
pre-deꢀned period of time.
2 Press
to select [Setup] >
[Features] > [TV lock].
Automatically switch theTV on (on
timer)
You can switch the TV to a speciꢀed channel
at a speciꢀed time, from standby.
1 Press (Home).
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
» A message appears prompting you to
Select a subtitle language on digitalTV
channels
enter your PIN code.
3 Enter your PIN code with the Numeric
Note
buttons.
» The [TV lock] menu appears.
• When you select a subtitle language on
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
4 Press
to select [Lock] or [Unlock].
5 Press OK.
» All channels and connected devices are
locked or unlocked.
1 Press DIGITAL MENU.
2 Press
to select [Preferences] >
[Language] > [Subtitle].
Lock or unlock one or more channels
1 When watching TV, press OK.
» The channel grid appears.The active
channel is highlighted.
3 Press OK or to enter the list of
available languages.
4 Press
to select a subtitle language.
5 Press OK to enable your selection.
2 Press OPTIONS.
Tip
3 Press
to select [Lock/Unlock chan.].
4 Key in your PIN code.
• You can also access [Subtitle language] menu
while watching TV by pressing SUBTITLE >
[Subtitle language].
» The channel displays the lock icon.
Use subtitles
Use theTV clock
You can enable subtitles for eachTV channel.
With digital broadcasts, you have the additional
option of selecting a preferred subtitle language.
You can display a clock on theTV screen.The
clock displays the current time using time data
received from yourTV service operator.
Enable subtitles on digitalTV channels
Display theTV clock
1 When watching digital channels, press
SUBTITLE.
1 When watching TV, press OPTIONS.
» The [Subtitle mode] menu appears.
» TheTV options menu appears.
2 Select [On] to display subtitles or [On
during mute] to display subtitles only
when audio is muted.
3 Press OK to enable subtitles.
2 Select [Clock].
3 Press OK.
» The clock is displayed.
Note
• The clock is disabled automatically after ten
minutes. To disable the clock before that,
repeat this procedure.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
View photos, play music and
watch video from a USB
storage device
Tip
• Press BROWSE to switch between
thumbnail and ꢀle browsing views.
Caution
Disconnect a USB storage device
• Philips is not responsible if the USB storage
device is not supported nor is it responsible
for damage or loss of data from the device.
Caution
• Follow this procedure to avoid damage to your
USB storage device.
YourTV is ꢀtted with a USB connector that
enables you to view photos, listen to music or
watch movies stored on a USB storage device.
1 Press
BACK A/CH to exit the [USB]
menu.
Supported ꢀle formats
2 Wait for ꢀve seconds before
Pictures
JPEG (non-progressive only)
disconnecting the USB storage device.
Music
MP3
Video
H.264, MPEG4
View photos
Note
1 In the USB content browser, press to
enter the [Picture] folder.
• Only FAT or DOS-formatted USB storage
devices are supported. File names must not
exceed 128 characters.
2 Press
to select a photo.
3 Press OK to view a full screen image of
• Your TV only supports USB ꢁash drives in
FAT/FAT32 format. It does not support other
devices that can be connected to the USB
port including but not limited to the following:
portable storage devices such as external
hard drives and mini hard drives, MP3 player,
digital camera, phone, portable video player,
portable multimedia player.
the photo.
Tip
• When in full screen mode, press
between photos.
to move
• The capacity of the USB storage device must
not exceed 32 gigabytes.
• The ꢀle size of all supported formats must not
exceed 4 gigabytes.
View a slide show of your photos
1 When a full screen image of a photo is
displayed, press
or OK.
» A slide show begins from the selected
Connect a USB storage device and
enter the content browser
image.
2 Press:
1 Turn on the TV.
•
to pause the slide show.
2 Connect the USB device to the USB port
•
or
to go back or move
forward to the next image.
BACK A/CH or to stop the
slide show and return to the USB
content browser.
on the side of the TV.
3 Press (Home).
•
» The home menu appears.
4 Press
to select [Browse USB].
5 Press OK to conꢀrm.
» The USB content browser appears.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Change slide show settings
Use Scenea to display a
picture asTV wallpaper
You can use the Scenea feature to display a still
picture as wallpaper on yourTV.This feature is
for home mode only.
1 When viewing a slide show, press
OPTIONS.
» The slide show options menu appears.
2 Press
to select from the following
settings and adjust:
•
•
•
[Start/Stop slide.]Starts or stops a
slide show.
[Slideshow transitions]Displays a list
of transition styles.
[Slideshow frequency]Sets the
amount of time that a picture is
shown.
[Rotate image]Rotates a picture.
[Show info]Displays the picture
name, date, size and next picture in
the slide show.
Activate Scenea
Single-picture wallpaper
Press SCENEA on your remote control.
» The default or pre-loaded picture is
displayed.
•
•
Note
3 Press OK to conꢀrm the setting change.
• To deactivate the wallpaper, press any remote
control button except
,
SOUND, and
Listen to music
PICTURE.
• The wallpaper is also deactivated when you
connect a USB storage device to the TV or
start an EasyLink-compliant device through
one-touch play.
1 Connect a USB storage device to the
USB port on the side of the TV.
2 Press to enter the menu.
Wallpaper slide show
Make sure the wallpaper is not yet activated.
3 Select [Music], and then press to enter
the [Music] folder.
1 Connect a USB storage device to the TV.
4 Press or to select a song or a music
album.
2 Press SCENEA.
» All pictures in the USB storage device
are displayed.
5 Press OK to play the selected song or
album.
Music settings
Note
•
•
•
[Show info]Displays the ꢀle name.
[Repeat]Repeats a song or an album.
[Shuf]e]Plays songs randomly.
• The wallpaper display duration is determined
by the pre-deꢀned sleeptimer settings (see
‘Automatically switch the TV to standby
(sleeptimer)’ on page 19). When sleeptimer is
off, the wallpaper is displayed for a maximum
of 120 minutes.
Watch video from a USB device
1 In the USB content browser, press to
enter the [VIDEO] folder.
2 Press
to select a video.
3 Press OK to play the video.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Upload a wallpaper picture from a
USB device
Before performing this procedure, be sure to
have available a USB storage device containing
the picture you intend to use as wallpaper.
Step 2 Download the latest software
1 Connect the USB storage device to a
computer with internet connection.
2 Locate and open the ꢀle update.htm on
your USB storage device.
3 Read the on-screen instructions and click
If a new software is available, the update
is downloaded to the USB storage device.
4 Disconnect the USB storage device.
the Send ID button.
1 Connect the USB storage device to the
TV.
» The home menu appears with
[Browse USB] already highlighted.
2 Press OK.
Step 3 Update theTV software
3 Press
to select a picture.
4 Press SCENEA to set the picture as
Caution
personalised wallpaper.
• Do not disconnect the USB storage device
from the TV during the software update.
• If a power failure occurs during the update, do
not remove the USB storage device from the
TV. The TV will continue the update as soon
as power comes back.
5 Disconnect the USB storage device.
Update theTV software
Philips continuously tries to improve its
1 Connect the USB storage device to the
TV.
products and we recommend that you update
theTV software when updates are available.
» An on-screen message prompts you to
update yourTV software.
2 Select [Update].
Update software (analogue
broadcasts)
Before performing this procedure be sure to:
3 Select [Start].
4 Follow the on-screen instructions to
update the TV software.
•
•
•
Set aside some time to complete the
entire update.
Have available a USB storage device with
at least 64MB of storage space.
Have access to a computer with a USB
port and internet access.
Update using a USB device
Connect your USB device to the USB port at
the side of your TV.
1 If the software update screen does not
appear automatically, select [Setup] >
[Software update] > [Local updates]
> [USB] to update the TV software
manually.
Step 1 Download theTV identiꢀcation ꢀle
1 Press (Home)
2 Follow the on-screen instructions to
2 Select [Setup] > [Software update] >
complete the update.
[Update assistant] > [Action].
3 Select [Start].
Note
4 Follow the on-screen instructions to
download the TV identiꢀcation ꢀle to the
USB storage device.
• The TV restarts after the software update is
complete.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
ChangeTV preferences
Reset theTV to factory
settings
The [Preferences] menu allows you to
customise various features and functions.
You can restore the default picture and sound
settings of yourTV. Channel installation settings
remain the same.
1 Press (Home).
2 Select [Setup] > [Installation] >
[Preferences].
1 Press (Home).
•
•
•
[Location]Optimises TV settings for
your location - home or shop.
[Volume bar]Displays the volume
bar when adjusting the volume.
[Channel info.]Displays information
about the TV channel every time you
switch channels.
2 Select [Setup] > [Installation] > [Factory
settings].
3 Press to enter the [Factory settings]
menu.
» [Reset] is highlighted.
4 Press OK to reset to default settings.
•
•
•
[EasyLink]Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
[Pixel Plus Link]Overrides the
settings of connected devices and
uses the settings of the TV.
5 Press (Home) to exit.
[E-sticker]For shop mode only. Sets
the location of the e-sticker.
Start aTV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
When a demo is available, it is displayed in the
menu list.
1 Press DEMO.
2 Press or to select a demo.
3 Press OK to start the demo.
4 Follow on-screen instructions to view the
demo.
5 Press DEMO to exit.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
a TV ANTENNA
Signal input from an antenna, cable or
satellite.
7 Connect devices
b AUDIO IN L/R
This section describes how to connect
various devices with different connectors and
supplements examples provided in the Quick
Start.
Audio input from devices that require
a separate audio connection, such as a
computer.
c VGA
Note
Video input from a computer.
• Different types of connectors may be used to
connect a device to your TV, depending on
availability and your needs.
d SPDIF OUT
Digital audio output to home theatres
and other digital audio systems.
e CVI (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
Back connectors
f AV OUT (VIDEO and AUDIO L/R)
Only in analogue mode. Audio and
video output to analogue devices such as
another TV or a recording device.
1
g AV IN (VIDEO and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players, satellite receivers and VCRs.
2
h HDMI 1/2
Digital audio and video input from high-
deꢀnition digital devices such as Blu-ray
players.
3
4
5
6
7
8
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Side connectors
Connect a computer
Before you connect a computer to theTV
•
Set the monitor refresh rate on your
computer to 60Hz.
1
•
Press
FORMAT and change the TV
2
3
4
picture format to [Unscaled].
Connect a computer with one of the
following connectors:
Note
• Connections via DVI or VGA require an
additional audio cable.
5
•
HDMI cable
6
7
a AUDIO IN L/R
Audio input from analogue devices
connected to VIDEO or S-VIDEO.
•
DVI-HDMI cable
b VIDEO
AUDIO IN:
LEFT / RIGHT
HDMI 1 / DVI
HDMI 2 / DVI
HDMI 3 / DVI
VGA
Composite video input from analogue
devices such as VCRs.
c S-VIDEO
Video input from analogue devices such
as satellite receivers. When you use this
connector, do not use connector for
video signals.
DVI
d
Stereo audio output to headphones or
earphones.
e USB
Data input from USB storage devices.
f HDMI
Digital audio and video input from high-
deꢀnition digital devices such as Blu-ray
players.
g SERV. U
For use by service personnel only.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
HDMI cable and HDMI-DVI adaptor
6 If available, press or to select the
audio connector your device is connected
to and press .
AUDIO IN:
LEFT / RIGHT
HDMI 1 / DVI
HDMI 2 / DVI
HDMI 3 / DVI
VGA
7 Switch on your device and check for
video and audio output.
8 If there is video and audio output, press OK.
Repeat the procedure until all devices are
correctly assigned to connectors.
DVI
•
VGA cable
AUDIO IN:
LEFT / RIGHT
HDMI 1 / DVI
HDMI 2 / DVI
HDMI 3 / DVI
VGA
VGA
VGA
Add devices
After connecting devices, assign the device
attached to each connector.This allows you to
easily identify devices connected to yourTV.
1 Press (Home).
2 Select [Add new device] and press OK.
3 Select [Start] and press OK.
4 Press or to select a device and press
.
5 Press or to select the connector
your device is connected to and press .
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
EasyLink buttons
You can control EasyLink-compliant devices
with the following buttons on the remote
control of your TV.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Button
EasyLink function
(Play/ Starts, pauses or resumes
Pause)
(Stop)
playback on your EasyLink device.
Stops playback on your EasyLink
device.
Note
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
(Record) Starts or stops video recording
on your EasyLink device.
(Fast
Reverse)
(Fast
Forward)
0-9
Searches backward.
Searches forward.
Note
• The EasyLink-compliant device must be
switched on and selected as the source.
When EasyLink is enabled,
(Numeric selects a title, chapter or track.
buttons)
EasyLink features
Navigates through the menus of
the EasyLink-compliant device.
Activates a selection or accesses
the menu of the EasyLink-
compliant device.
One-touch play
When you connect your TV to devices that
support one-touch play, you can control your
TV and the devices with one remote control.
For example, when you press Play on your
DVD remote control, your TV automatically
switches to the correct channel to show the
DVD content.
OK
Displays the menus of the
OPTIONS EasyLink-compliant device. Note
that when (Home) is pressed,
the TV menu is displayed.
One-touch standby
When you connect your TV to devices that
support standby, you can use your TV remote
control to put your TV and all connected
HDMI devices in standby mode.
System audio control
When you connect your TV to HDMI
CEC compliant devices, your TV can
switch automatically to play audio from the
connected device.
(Standby- When EasyLink is enabled,
On)
switches the TV and all EasyLink
devices to standby. Note that
you must press and hold
(Standby-On) for at least 3
seconds for this to occur.
Tip
• Press TV to switch back to the aerial source
To use one-touch audio, you must map the
audio input from the connected device to
your TV.
from EasyLink mode.
You can use the remote control from the
connected device to adjust the volume.
Remote control (RC) key forwarding
RC key forwarding allows you to control
EasyLink-compliant devices using your TV
remote control.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Enable or disable EasyLink
Use a Kensington lock
Note
There is a Kensington security slot at the back
of theTV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
• Do not enable Philips EasyLink if you do not
intend to use it.
1 Press (Home).
2 Select [Installation] > [Preferences] >
[EasyLink].
3 Select [ON] or [OFF].
Enable or disable remote control key
forwarding
1 Press (Home).
2 Select a device that is connected to an
HDMI connector.
3 Press OPTIONS.
4 Select [En./Dis. RC pass.].
5 Press OK.
6 Press or to highlight an HDMI
connector.
7 Press OK to enable RC key forwarding
for the selected HDMI connector.
SetTV speakers to EasyLink mode
When enabled, this feature automatically
turns off TV speakers when content from an
EasyLink-compliant home theatre system is
played. Audio is played only from the home
theatre system’s speakers.
1 Press (Home).
2 Press
to select [Setup] > [Sound].
» The [Sound] menu appears.
3 Select [TV speakers].
» The [TV speakers] menu appears.
4 Select [Auto (EasyLink)].
» TV speakers are set to EasyLink mode.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner/Reception/Transmission
8 Product
information
•
•
Aerial input: 75ohm coaxial (IEC75)
TV system: PAL BG, SECAM BG, PAL I,
PAL DK, SECAM DK, NTSC M
•
Video playback: NTSC, PAL, SECAM
Product information is subject to change
without notice. For detailed product
Multimedia
•
•
Connection: USB
Playback formats: H.264, MPEG4, JPEG, MP3
Supported display resolutions
Computer formats
HDMI:
Container Video
Codec
Audio
Codec
File
extension
AVI
MPEG 4 SP,
MPEG
MPEG 4 ASP, Layer 2/3,
MP4S,MP4V AC3
.avi
Resolution
640 x 480
720 x 400
800 x 600
1024 x 768
1280 x 1024
1360 x 768
1600 x 1200
1920 x 1080
Refresh rate (Hz)
60, 72, 75
70
mpeg
MPEG-1
MPEG 1
Layer 2
.mpg,
.mpe,
.mpeg,
.vob,
60, 72, 75
60, 70, 75
60
.dat
60
60
mpeg4
MPEG-4AVC AAC-LC
(h.264,L2-CIF),
MPEG-4AVC
(h.264,L4-HD)
.m4v,
.mp4,
.mov
50, 60
VGA:
Resolution
Refresh rate (Hz)
640 x 480
720 x 400
800 x 600
1024 x 768
1280 x 768
1280 x 1024
1360 x 768
60, 72, 75, 85
Remote control
70, 85
60, 72, 75, 85
•
Batteries: 2 x AAA (LR03 type)
60, 70, 75, 85
60
60
60
Connections
Video formats
•
•
•
•
•
•
•
•
•
•
•
•
Headphone out (stereo mini-jack)
Resolution
640 x 480p
Refresh rate (Hz)
TV aerial
S-Video
60
CVBS in
720 (1440) x 480i
720 (1440) x 576i
720 x 480p
60
CVBS out
50
YPbPr: Component video (CVI in)
60
VGA in
HDMI
720 x 576p
50
1280 x 720p
1920 x 1080i
1920 x 1080p
50, 60
VGA Audio in
SPDIF out
USB
50, 60
24, 25, 30, 50, 60
Service connector
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
•
Mains power: AC 220-240V, 50-60Hz
(+/- 10%)
•
•
Standby power: < 0.15W
Ambient temperature: 5 to 35 degrees
Celsius
SupportedTV mounts
To mount theTV, purchase a PhilipsTV mount
or aVESA-compatibleTV mount.To prevent
damage to cables and connectors, be sure to
leave a clearance of at least 5.5 cm from the
back of theTV.
Warning
• Follow all instructions provided with the TV
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.
TV
screen
size
VESA-compatible wall
bracket type
32”-37” 200 x 200 mm
42”-47” 400 x 400 mm
M6
M6 (42”),
M8 (47”)
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel issues
9 Troubleshooting
Previously installed channels do not appear in
the channel list:
This section describes commonly encountered
issues and accompanying solutions.
•
Check that the correct channel list is
selected.
No digital channels were found during the
installation:
GeneralTV issues
•
Ensure that you have a digital TV
subscription. Contact your digital TV
service provider.
TheTV does not switch on:
•
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
Check that the power cable is securely
connected.
Picture issues
•
TheTV is on, but there is no picture:
The remote control is not working properly:
•
•
Check that the antenna is properly
connected to the TV.
Check that the correct device is selected
as the TV source.
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
•
•
•
Replace the remote control batteries if
they are ꢁat or weak.
Clean the remote control and TV sensor
lens.
There is sound but no picture:
•
Check that the picture settings are
correctly set.
There is poorTV reception from an antenna
connection:
The standby light on theTV blinks red:
•
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
•
Check that the antenna is properly
connected to the TV.
•
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can inꢁuence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
If reception on only one channel is poor,
ꢀne tune this channel.
You forgot the code to unlock the child lock
feature
•
Enter ‘0711’. This code is only for the
analogue mode.
•
TheTV menu is in the wrong language
•
Change the TV menu to your preferred
language.
There is poor picture quality from connected
devices:
When turning theTV on/off/to standby, you
hear a creaking sound from theTV chassis:
•
Check that the devices are connected
properly.
Check that the picture settings are
correctly set.
•
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools and warms up. This
does not impact performance.
•
TheTV did not save your picture settings:
•
Check that the TV location is set to the
home setting. This mode offers you the
ꢁexibility to change and save settings.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
The picture does not ꢀt the screen; it is too
big or too small:
USB connection issues
•
Try using a different picture format.
USB device content is not displayed:
The picture position is incorrect:
•
Check that the USB storage device is
set to ‘Mass Storage Class’ compliant,
as described in the storage device’s
documentation.
•
Picture signals from some devices may
not ꢀt the screen correctly. Check the
signal output of the device.
•
•
Check that the USB storage device is
compatible with the TV.
Check that the audio and picture ꢀle
formats are supported by the TV.
Sound issues
Audio and picture ꢀles do not play or display
smoothly
•
There is a picture but no sound from theTV:
Note
The transfer performance of the USB
storage device may limit the data transfer
rate to the TV, causing poor playback.
• If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
•
Check that all cables are properly
connected.
Computer connection issues
•
•
Check that the volume is not set to 0.
Check that the sound is not muted.
The computer display on theTV is not stable:
•
Check that a supported resolution and
refresh rate is selected on the computer.
Set the TV picture format to unscaled.
There is a picture but the sound quality is poor:
•
Check that the sound settings are
correctly set.
•
There is a picture but sound comes from one
speaker only:
Contact us
•
Verify that sound balance is set to the centre.
If you cannot resolve your problem, refer to
support.
HDMI connection issues
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this user manual.
There are problems with HDMI devices:
•
Note that HDCP support can delay the
time taken for a TV to display content
from a HDMI device.
Warning
•
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
• Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
•
•
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
If a HDMI-to-DVI adaptor or HDMI to
DVI cable is used, check that an additional
audio cable is connected to AUDIO L/R
or AUDIO IN (mini-jack only).
Note
• Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
E
10 Index
EasyLink
disable
29
29
4
enable
B
Environmental care
Batteries
4
F
C
Factory settings
Favourite list
select
24
Channel list
favourite
18
32
18
18
18
troubleshooting
update
set up
Channels
favourite list
install
18
H
HDMI cable
troubleshooting
Home mode
automatic
manual
31
31
32
31
10
33
24
rearrange
rename
test reception
Child lock
TV lock
I
Installation
automatic
manual
19
20
31
31
Clock
Computer format
technical speciꢀcations
Connections
HDMI
30
L
Language
troubleshooting
Location
Lock
32
24
troubleshooting
mains cord
technical speciꢀcations
troubleshooting
USB
33
25
30
33
TV
19
troubleshooting
Connectors
assign devices
33
27
M
Menu
child lock
language
19
32
15
32
main menu
troubleshooting
Multimedia
technical speciꢀcations
Music
D
Demo
24
Devices
30
assign
27
8
watch
digital radio
USB
14
22
Digital channel
test reception
Digital radio
Display
10
14
P
resolution
screen saver
30
22
Picture format
troubleshooting
32
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture settings
PIN code
Power
15
32
32
U
USB
listen to music
22
23
21
upload a picture from
view photos
R
Reception
32
Remote control
technical speciꢀcations
troubleshooting
V
30
32
Video format
video format technical speciꢀcations
30
8
Volume
adjust
S
Screen saver
Settings assistant
Sleep timer
Smart settings
Sound settings
Standby
22
15
19
W
Wallpaper
22
16, 17
17
troubleshooting
Subtitles
32
language
on analogue channel
on digital channel
20
20
20
T
Technical speciꢀcations
Timer
30
on timer
19
19
19
sleeptimer
standby
Transmission
troubleshooting
Troubleshooting
TV
32
32
adjust volume
menu
8
15
23
7
software
standby
switch channels
switch off
switch on
7
7
7
troubleshooting
tuner technical speciꢀcations
TV lock
32
30
lock channels
lock connected devices
PIN code
20
19
32
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 3139 125 41062
Download from Www.Somanuals.com. All Manuals Search And Download.
|