Phase Technology Speaker RS1001i II User Manual

Open-Ceiling Speaker  
RS1001i-ll  
Technical Information for System Engineers  
Key Features  
• One 254 mm (10.0 in) polypropylene  
woofer mounted to a proprietary cast-  
aluminum M8baffle and heat sink.  
• Weatherized components for indoor  
& outdoor applications.  
• Includes hanging hardware with aircraft  
cables and integrated SpeedClamp™  
self-locking cable grip for fast, easy &  
secure installation.  
• Patented ZeroReflectionenclosure tech-  
nology for optimal sound reproduction  
& cabinet rigidity. Also includes Eurob-  
lock connector & terminal weather boot.  
Specifications: RS1001i-II  
System Type  
10” Subwoofer, open-ceiling, ported (150 Watt optional  
transformer for 25/70.7/100 Volt or 4 ohm direct)  
4 ohm  
93.5dB  
90.5dB  
N/A  
53 Hz - 120 Hz  
40 Hz - 300 Hz  
300w  
150w  
100w  
112.5dB  
N/A  
N/A  
Impedance (nominal) 1  
Sensitivity dB @ 2.83V/1M  
Sensitivity dB @ 1W/1M 2  
Distance Factor  
Frequency Response (- 3 dB) 3  
Frequency Response (-10 dB) 3  
Max. Program Power 4  
Max. Continuous Power RMS 5  
Max. UL program power  
Max. Power SPL @ 1 M 6  
Max. SPL @ x% distortion 7  
Coverage Angle (-6 dB @ 2 kHz)  
• Easy access 5-position selectable tap  
switch for 25, 70.7 and 100 Volt applica-  
tions with 4 Ohm bypass simplifies  
ordering and inventory tracking.  
• Iridite-plated steel grille with protective  
powder-coated finish for lasting durability.  
• 93.5 dB Sensitivity offers high-output  
capabilities & reduced amplification costs.  
Coverage Angle (-6 dB @ 10 kHz) N/A  
• UL 1480 rev. 5, CE approval (EMC Direc-  
tive 89/366/EEC, EN55020, EN55013), Mil-  
spec 810 & IEC529 approval pending.  
Directivity Factor (Q)  
Directivity Index (DI) dB  
Tap Selector  
N/A  
N/A  
5-Position rotary switch with 4 ohm direct  
Transducer - Low Frequency Driver 1 x 254mm (10in) Polypropylene cone, butyl rubber surround  
Transducer - High Frequency Driver N/A  
• High-quality black or white paint finish.  
Custom paint colors optional.  
Low Frequency Voice Coil  
Crossover Frequency  
Network Type: Low Pass  
Network Type: High Pass  
Enclosure Material  
Motor-board  
35.0mm 1.38in  
100.0 kHz  
6dB per octave, 1st order  
N/A  
Injection molded ABS, glass fiber reinforced  
N/A  
Description  
The RS1001i-II is a 10” subwoofer with  
an open-ceiling enclosure design that  
delivers additional low-end response (40  
Hz) for satellite/subwoofer applications.  
The RS1001i-II speaker design incorporates  
a low-profile grille, 5-position tap switch  
with voice coil/4 Ohm direct. Hanging  
hardware is included & features Speed-  
Clampself-locking cable grip for fast,  
easy & secure installation.  
Grille  
Inputs  
Colors  
Iridite-plated steel with powder-coat finish  
4 Pin, 5mm Euroblock for individual or daisy chain connection  
Black or white  
Height (SM = Height)  
Diameter (SM = Width)  
Weight  
17.23 in / 437.6 mm  
14.82 in / 376.4 mm  
27.0 lb / 12.3 kg  
Shipping Weight  
Accessories  
32.5 lb / 14.8 kg  
Included  
Hanging hardware, Euroblock connector & terminal  
weather boot  
1 per box  
Applications  
Designed for indoor & outdoor back-  
ground subwoofer applications, the  
RS1001i-II includes a single point mount-  
ing system for rapid open-ceiling installa-  
tions. True low-end response (40 Hz) and  
high sensitivity (90.5 dB 1W/1M) make  
the RS1001i-II ideal for additional bass  
response in retail, restaurants and other  
open-ceiling subwoofer applications.  
Packaging  
1
Transformer Taps  
Impedance listed per IEC 60268-5 with  
a minimum less than 80% the nominal  
impedance  
70.7 V Output  
100 V Output  
25 V Output  
19w 103.5dB  
9.5w 100.5dB  
4.8w 97.5dB  
2.4w 94.5dB  
2
3
150w 112.5dB 150w 112.5dB  
1w1m sensitivity determined using nominal  
impedance  
75w 109.5dB  
38w 106.5dB  
19w 103.5dB  
75w 109.5dB  
38w 106.5dB  
Frequency response measured in half or  
full space as dictated by speaker mounting  
configuration  
4
Max program power is 3 dB above max  
continuous power  
5
6
7
Continuous power rating, EIA-426-B test  
Max output based on max continuous power  
Max useable SPL based on testing  
by NWAA Labs  
© 2007 SoundTube Entertainment, Inc. All rights reserved. PN TS-RS801 REV 12.05.07  
SoundTube continually develops new product innovations and improvements. Updates to existing  
products without prior notice are an example of SoundTube’s drive for constant improvement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Open-Ceiling Speaker  
RS1001i-ll  
Technical Information for System Engineers  
and be available for 25, 70.7 & 100 Volt  
modes with voice coil/4 Ohm direct.  
The frequency-dividing network shall  
have a crossover frequency of 100 Hz  
with a 6 dB per octave (1st order) slope  
for the low pass filter. Rated power  
capacity shall be at least 150 Watts con-  
tinuous power (RMS) and conform to  
EIA-426-B testing. Maximum continu-  
ous output at 1 meter shall be 112.5 dB.  
Installation for the RS1001i-II shall be  
by aircraft cable affixed to the speaker  
chassis via a carabiner. For seismic &  
safety redundancy, a secondary aircraft  
cable shall be included and attach to the  
speaker chassis via #10 bolt. The exter-  
nal wiring input connector shall be a  
4-pin, 5 mm Euroblock for 4 Ohm or dis-  
tributed systems and shall accept from  
10 – 22 gauge wire. The system shall be  
for indoor & outdoor applications, and  
shall have a weather-resistant terminal  
boot covering all wire connectors.  
The enclosure shall be constructed of  
injection molded, mineral filled, glass  
reinforced ABS. The grille shall be con-  
structed of iridite-plated, powder-coated  
steel for lasting performance in the ele-  
ments. Overall cabinet dimensions shall  
be no more than 437.6 mm (17.23 in) in  
height by 376.4 mm (14.82 in) in diam-  
eter. The RS1001i-II shall include hang-  
ing hardware, Euroblock connector and  
weather-resistant terminal boot.  
The system shall be the SoundTube  
RS1001i-II subwoofer with hanging  
hardware for both low & high imped-  
ance applications.  
SoundTube Entertainment  
6430 North Business Park Loop  
Park City, Utah 84098  
Phone 435.647.9555  
Fax  
435.647.9666  
Toll Free 800.647.TUBE  
All SoundTube products come  
with a 5-year limited warranty.  
SoundTube Entertainment manufactures a complete line of speakers for:  
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing  
All SoundTube products are designed and engineered in the USA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey DJ Equipment MULTIFEX User Manual
Philips CD Player AZ 6801 User Manual
Philips Cell Phone CD155 User Manual
Philips Flat Panel Television 15PT2594 User Manual
Philips Grinder 42PFL9664H User Manual
Pioneer DVR DVR 540H S User Manual
Planar Computer Monitor PL1910M User Manual
Polk Audio Car Speaker PSW650 User Manual
Poulan Chainsaw 530087764 User Manual
Pride Mobility Mobility Aid Jazzy 1170XL User Manual