R
HV Subwoofers
T
E
C
H
N
O
L
O
G
Y
Owners Manual / Installation Instructions
HV81 HV101 HV121
Thank you for choosing Phase Technology speakers. We know there are a wide variety of choices available
today, and we sincerely appreciate your purchase of our product. Phase Technology speakers are built to
exacting standards and will provide many years of listening enjoyment.
Our speakers are the result of over five decades
of designing and manufacturing. Our mission,
our passion is to constantly advance the art
and science of accurate audio reproduction.
Our dedication insures your new speakers will
accurately reproduce all the impact, detail and
delicacy of today’s digital technology.
Regardless of application, serious audiophile
listening or home theater, we recommend that
you take the time to read this manual thoroughly
before connecting speakers to your amplifier
or receiver. In the highly unlikely event that you
should experience a problem with set-up or
operation, please contact one of our authorized
dealers for assistance, or contact us directly.
HV81
HV SERIES FEATURES:
100-watt internal amplifier
Signal sensing auto turn on/off
CONTENTS:
Gain control
Phase switch
Variable crossover
Line/level inputs
HV SERIES FEATURES
1
2
2
3
SUBWOOFER PLACEMENT
SUBWOOFER AMPLIFIER PANEL
SUBWOOFER CONNECTIONS
LFE input
AMPLIFIER SETUP AND BASS MANAGEMENT 4
WARRANTY
4
4
Oversized surround for ultra long excursion
Servo-control, which monitors and adjusts output
for dynamic and undistorted response
SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBWOOFER CONNECTIONS
Option 1: Low Level Setup This is the recommended method for those amplifiers and receivers that are
equipped with a “Subwoofer Out” or “Pre-Amp Out” connection. Virtually all audio/video receivers have this
connection clearly marked on the rear panel. Run a dedicated interconnect cable with RCA connectors from
the subwoofer output jack to the line input on the subwoofer. In this setup, you will be using the internal
crossover on your processor.
Subwoofer
SUB OUT
Right
Front
Left Right
Surr. Surr.
Left
Front
Center
Channel
Line Input
Ampliꢀer Panel
Option 2: High Level Input Setup If your amplifier or receiver does not have a dedicated subwoofer output,
it will be necessary to connect your new subwoofer directly to the speaker output terminals on the back of the
unit. In this scenario, you will be running high quality speaker wires from the left and right front outputs of your
amplifier to the high level inputs on the subwoofer. You will then need a second set of wires to carry the signal
from the subwoofer back to the main speakers.
Center Speaker
Left
Front
Right
Front
Ampliꢀer Panel
SUB OUT
Right
Front
Left Right
Surr. Surr.
Left
Front
Center
Channel
Subwoofer
To Speaker
Right
From Receiver
Right Input
Left Input
Left
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFIER SETUP AND BASS MANAGEMENT
Many home theater receivers/processors have a feature that controls how the bass is processed and delivered
to the subwoofer. It also adjusts the amount of bass that is sent to your satellite speakers. Look carefully in your
amplifier or receiver’s instruction manual for details on how to adjust for the speaker size (sometimes called
“Speaker Setup”) for your system.
When using a Dolby® Digital or DTS™-capable receiver/processor with the subwoofer connected to the
subwoofer out on your amplifier turn the “LOW-PASS FREQUENCY” control to the highest setting (200 Hz) on
the back of your subwoofer. Set the subwoofer crossover setting in the speaker setup section of the amplifier
setup menu to 150 HZ (or the next highest setting) and set the Satellites and Center channels to “small”.
If you are NOT using the receiver’s internal processor for subwoofer control then turn the “CROSSOVER
FREQUENCY” control on the subwoofer to the 3 o’clock (150 Hz) setting.
WARRANTY
LIMITED WARRANTY
Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period
of ten (10) years for speaker product and three (3) years for the electronic components to the original purchaser.
Purchase must be made from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in
transit, alterations, unauthorized repairs, failure to follow instructions, fire, flood or any other cause beyond the
reasonable control of Phase Technology. Defects in speaker cabinets or grilles must be brought to the attention
of your dealer immediately after purchase. This warranty will be void if the products’ serial number has been
altered or removed.
To obtain warranty service, defective product must be shipped in its original carton or equivalent together with
original invoice or bill of sale, insured and prepaid to your authorized Phase Technology dealer or the factory
when warranty service is requested.
If you choose to return the defective product to the factory you must first call us at (888) phase-tk to obtain
a Return Authorization number prior to shipping. Product repaired under this warranty will be returned to you
freight collect.
SPECIFICATIONS HV81
HV101
HV121
Woofer
8” treated paper cone
10” treated paper cone
12” treated paper cone
Amp Power
100
100
100
(Watts, continuous)
Amp Power
200
200
200
(Watts, peak)
Frequency Response
Dimensions*
Finish
35-200 Hz
29-200 Hz
25-200 Hz
10.75” W x 14.125” H x 14.75” D*
Black Woodgrain Finish
11.75” W x 17” H x 16” D*
Black Woodgrain Finish
14” W x 19.5” H x 18.25” D*
Black Woodgrain Finish
*Add 1” to depth for connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
|