Open Ceiling Speaker
HP890i
Preliminary Technical Information for System Engineers
Preliminary Technical Information
The information in this document reflects
preliminary data. Items including polar
plots, frequency, phase and impedance
response graphs will be added when final
data are available.
Key Features
• BroadBeamHP® waveguide technology
delivers a consistent dispersion pattern for
maximum coverage area per speaker (up
to 10 kHz, EASE™ documented).
Mounting hardware included
Specifications: HP890i
System Type
8” Coax, compression tweeter w/ 1” exit, open-ceiling, ported (120
Watt transformer for 25/70.7/100 Volt or voice coil / 8 Ohm direct)
Frequency Response (- 3 dB)1
Low Frequnecy (-10 dB)1
Max. Program Power
Max. Continuous Power2
Max. SPL dB @ 1 M
73 Hz - 22 kHz
• One 203 mm (8.0 in) treated fiber driver
and one compression driver with a 25.4 mm
(1 in) exit mounted to a proprietary cast-
aluminum M8™ baffle and heat sink.
63 Hz - 22 kHz
250 Watts
125 Watts
115 dB
Sensitivity dB @ 1W/1M3
Impedance (nominal)
Coverage Angle (-6 dB @ 2Hz)
Coverage Angle (-6 dB @ 4 kHz)
Directivity Factor (Q)
94 dB
• 120Watttransformerandhighoutput(115dB)
forthesoundreinforcementandPAmarkets.
8 Ohm
122º
• Easy-access 5-position selectable tap
switch for 25, 70.7, and 100 Volt applica-
tions with voice coil/8 Ohm direct simpli-
fies ordering and inventory tracking.
130º
4.64 (Averaged 100 Hz - 10 kHz); 4.48 @ 2 kHz
8.34 dB (Averaged 100 Hz - 10 kHz); 6.51 dB @ 2 kHz
5-Position rotary switch with voice coil direct (8 Ohm)
Directivity Index (DI)
Tap Selector
• Weatherized components for indoor/
outdoor applications
Transformer Taps
70.7 V Output
120 W 115 dB
64 W 112 dB
32 W 109 dB
16 W 106 dB
100 V Output
120 W 115 dB
64 W 112 dB
32 W 109 dB
16 W 106 dB
25 V Output
• 94 dB Average sensitivity offers high-output
capabilities and reduced amplification costs.
16 W 106 dB
8 W 103 dB
3.8 W 100 dB
1.9 W 97 dB
• Includes hanging hardware with aircraft
cables and integrated SpeedClamp™ self-
locking wire grip for fast, easy & secure
installation. Also includes Euroblock con-
nector & terminal weather boot.
Transducers
Low Frequency Driver
High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
1 x 203 mm (8 in) Treated fiber cone, cloth surround
1 Compression driver with waveguide and 25.4 mm (1 in) exit
34 mm (1.36 in)
• Optional accessory: surface-mount
bracket (AC-RS-SM8).
2.4 kHz
• High quality black or white paint finish.
Network Type
Low Pass
High Pass
Enclosure Material
Motor Board
Grille
Inputs
Colors
Height
Diameter
12 dB per octave, 2nd order
12 dB per octave, 2nd order
Injection molded ABS, glass fiber reinforced
Cast aluminum with integrated heat sink
Iridite-plated steel with powder-coat finish
4 Pin, 5 mm Euroblock for individual or daisy chain connection
Black or white
437.7 mm / 17.23 in
376.5 mm / 14.82 in
10.0 kg / 22.1 lbs
N/A
Description
The HP890i is a premium 8.0” 2-
way, ported high-efficiency, high-SPL
loudspeaker for distributed or 8 Ohm
applications. The HP890i incorporates a
dedicated 8.0” treated fiber driver and
high-power compression transducer
with a BroadBeamHP® waveguide to
deliver a consistent dispersion pattern
and superb intelligibility for the fore-
ground music, sound reinforcement and
PA markets. The HP890i incorporates a
120 Watt transformer with a 5-position
tap switch and voice coil/8 Ohm direct
position. Hanging hardware is included
and features a fast-action SpeedClamp™
for easy and secure installation.
Weight
Shipping Weight
Accessories
Included
Optional
Hanging hardware, Euroblock connector & terminal weather boot
Surface-Mount Bracket (AC-RS-SM8)
1 per box
Packaging
1
2
3
Frequency response is measured in full space.
Continuous power rating, EIA-426-B test.
2.83 Volts at a distance of 1 meter.
Applications
Engineered for installations requiring
full-range background/foreground music
plus paging, the HP890i delivers a smooth
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube’s drive for constant improvement.
© 2006 SoundTube Entertainment. All rights reserved. PN TS-HP590 REV 04.04.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Open Ceiling Speaker
HP890i
Preliminary Technical Information for System Engineers
impedance of 8 Ohms and be available for
25/70.7/100 Volt modes with a voice coil/8
Ohm direct. The frequency-dividing net-
work shall have a crossover frequency of 2.4
kHz with a slope of 12 dB per octave (2nd
order). Rated power capacity shall be at least
125 Watts continuous power (RMS), and
shall conform to EIA-426-B testing. Maxi-
mum continuous output at 1 meter shall be
115 dB.
ety of standard measurement techniques,
including Measured Length Sequence
(MLS) and Time Delay Spectrometry
(TDS). Performance, development and
data acquisition tools include: Gold Line
TEF 20, CLIO, LMS, LEAP, and propri-
etary modeling software. EASE™ data
are acquired through an automated TEF
20/Outline/EASE™ interface.
Patented SoundTube
Technologies
SoundTube Entertainment is consis-
tently developing new technologies that
enhance audio product performance.
SoundTube Entertainment innova-
tions are protected by multiple U.S. and
international patents, which explicitly
cover SoundTube dome, enclosure,
mounting and dispersion technolo-
gies. SoundTube Entertainment actively
defends it patents in order to protect
SoundTube resellers and end-users.
EASE™ Data – 3-D polar plots.
The low-frequency transducer shall have a
treated fiber cone and cloth surround.
SoundTubeSPEC™ – Proprietary
SoundTube speaker placement software.
Installation for the HP890i shall be by 10’
aircraft cable affixed to the speaker chassis via
hook. For seismic and safety redundancy, a
secondary aircraft cable shall be included and
shall attach to the speaker chassis via hook
and cable system. The external wiring shall
be a 4-pin 5 mm Euroblock connector for 8
Ohm or distributed systems and shall accept
from 10 – 22 gauge wire. The system shall be
for indoor and outdoor applications and have
a weather-resistant terminal boot covering all
wire connections.
Architectural Specifications
Technical Data and
Specification Tools
The loudspeaker shall consist of a 203
mm (8 in) low-frequency transducer and
a high frequency transducer with a 1”
exit and a frequency-dividing network
installed in a ported enclosure. The low-
frequency voice coil diameter shall be 34
mm (1.36 in).
Technical Data
SoundTube Entertainment strives to
provide complete and effective technical
information and data to dealers, engi-
neers and designers. All data are avail-
able from SoundTube Entertainment or
at www.soundtube.com.
The performance specifications of a
typical production unit shall be as follows:
Useable frequency response shall extend
from 63 Hz – 22 kHz (-10 dB, no external
equalization). Measured sensitivity (2.83
Volt input, 1 meter) shall be at least 94
dB. The speaker shall have a nominal
The enclosure shall be constructed of
injection-molded, glass reinforced ABS. The
grille shall be constructed of iridite-plated,
powder-coated steel for lasting performance
Data Acquisition
All performance data acquired at
SoundTube’s Technical Measurement
Center (TMC) are analyzed using a vari-
Polar Plots
N/A
™
™
Technical data, EASE plots, SoundTubeSPEC software & product downloads available at www.soundtube.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Open Ceiling Speaker
HP890i
Preliminary Technical Information for System Engineers
in the elements. Overall cabinet dimen-
sions shall be no more than 437.7 mm
(17.23 in) in height by 376.5 mm (14.82 in) in
diameter and weigh no more than 10.0 kG
(22.1 lbs).
Mechanical Drawings
The HP890i shall ship with hanging
hardware, Euroblock connector and ter-
minal weather boot. Optional accessories
for the HP890i include surface-mount
bracket (AC-RS-SM8), 20’ hanging cable
(AC-RS-HH-20) and 10’ split loom tubing
(AC-SLT-10) for architectural applications.
363.6 mm (14.31 in)
The system shall be the HP890i with
hanging hardware for both low- and high-
impedance applications.
SoundTube Entertainment
6430 North Business Park Loop
Park City, Utah 84098
Phone 435.647.9555
307.3 mm (12.10 in)
Fax
435.647.9666
Toll Free 800.647.TUBE
Included Accessories
Hanging Hardware: Main & Safety
Cables w/ SpeedClamp™
SoundTube’s hanging cable kit incorpo-
rates hanging & safety cables & fasten-
ers for an integrated and easy-to-install
system. Hanging & safety cables are
infinitely adjustable to 2.74 M (9.0 ft).
Optional Accessory
463.80 mm (18.26 in)
346.45 mm
(13.64 in)
Surface-Mount Bracket (AC-RS-SM8)
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing
All SoundTube products are designed and engineered in the USA.
Download from Www.Somanuals.com. All Manuals Search And Download.
|