Open Ceiling Speaker
HP690i
Preliminary Technical Information for System Engineers
Preliminary Technical Information
The information in this document reflects
preliminary data. Items including polar
plots, frequency, phase and impedance
response graphs will be added when final
data are available.
Key Features
• BroadBeamHP® waveguide technology
delivers a consistent dispersion pattern
for maximum coverage area per speaker
(up to 10 kHz, EASE™ documented).
Mounting hardware included
Specifications: HP690i
System Type
6.5”Coax,compressiontweeterw/1”exit,open-ceiling,ported(66
Watttransformerfor25/70.7/100Voltorvoicecoil/8Ohmdirect)
Frequency Response (- 3 dB)1
Low Frequency (-10 dB)1
Max. Program Power
Max. Continuous Power RMS2
Max. SPL dB @ 1 M
Sensitivity dB @ 1W/1M3
Impedance (nominal)
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 8 kHz)
Directivity Factor (Q)
78 Hz - 22 kHz
62 Hz - 22 kHz
200 Watts
100 Watts
112.5 dB
92.5 dB
8 Ohm
120º
• One 165 mm (6.5 in) treated fiber driver and
one compression driver with a 25.4 mm
(1 in) exit mounted to a proprietary cast-
aluminum M6™ baffle and heat sink.
• 66 Watt transformer and high output
(112.5 dB) for the sound reinforcement
and PA markets.
150º
• Easy-access 6-position selectable tap
switch for 25, 70.7, and 100 Volt applica-
tions with voice coil/8 Ohm direct sim-
plifies ordering and inventory tracking.
4.28 (Averaged 100 Hz - 10 kHz); 5.25 @ 2 kHz
5.44 dB (Averaged 100 Hz - 10 kHz); 7.2 dB @ 2 kHz
6-Position rotary switch with voice coil direct (8 Ohm)
Directivity Index (DI)
Tap Selector
Transformer Taps
• Weatherized components for indoor/
outdoor applications
70.7 V Output
66 W 111 dB
35 W 108.5 dB
19 W 106 dB
10 W 103 dB
5 W 100 dB
100 V Output
66 W 111 dB
35 W 108.5 dB
19 W 106 dB
10 W 103 dB
25 V Output
5 W 100 dB
2.5 W 97 dB
1.25 W 94 dB
0.75 W 92 dB
• 92.5 dB average sensitivity offers high-
output capabilities and reduced amplifi-
cation costs.
• Includes hanging hardware with aircraft
cables and integrated SpeedClamp™ self-
locking wire grip for fast, easy & secure
installation. Also includes Euroblock con-
nector & terminal weather boot.
Transducers
Low Frequency Driver
High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
1 x 165 mm (6.5 in) Treated fiber cone, cloth surround
1 Compression driver with waveguide and 25.4 mm (1 in) exit
34 mm (1.36 in)
3 kHz
• Optional accessory: surface-mount
bracket (AC-RS-SM6).
Network Type
Low Pass
High Pass
Enclosure Material
Motor Board
Grille
Inputs
Colors
Height
Diameter
18 dB per octave, 3rd order
18 dB per octave, 3rd order
Injection molded ABS, glass fiber reinforced
Cast aluminum
Iridite-plated steel with powder-coat finish
4 Pin, 5 mm Euroblock for individual or daisy chain connection
Black or white
363.6 mm / 14.31 in
307.3 mm / 12.10 in
7.3 kg / 16.2 lbs
N/A
• High quality black or white paint finish.
Description
The HP690i is a premium 6.5” 2-
way, ported high-efficiency, high-SPL
loudspeaker for distributed or 8 Ohm
applications. The HP690i incorporates a
dedicated 6.5” treated fiber driver and
high-power compression transducer with
a BroadBeamHP® waveguide to deliver a
consistent dispersion pattern and superb
intelligibility for the foreground music,
sound reinforcement and PA markets.
The HP690i incorporates a 66 Watt trans-
former with a 6-position tap switch and
voice coil/8 Ohm direct position. Hang-
ing hardware is included and features
a fast-action SpeedClamp™ for easy and
secure installation.
Weight
Shipping Weight
Accessories
Included
Hanging hardware, Euroblock connector & terminal
weather boot
Surface-Mount Bracket (AC-RS-SM6)
1 per box
Optional
Packaging
1
2
3
Frequency response is measured in full space.
Continuous power rating, EIA-426-B test.
2.83 Volts at a distance of 1 meter.
Applications
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube’s drive for constant improvement.
Engineered for installations requiring full-
range background/foreground music plus
© 2006 SoundTube Entertainment. All rights reserved. PN TS-HP590 REV 04.04.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Open Ceiling Speaker
HP690i
Preliminary Technical Information for System Engineers
equalization). Measured sensitivity (2.83 Volt
input, 1 meter) shall be at least 92.5 dB. The
speaker shall have a nominal impedance
of 8 Ohms and be available for 25/70.7/100
Volt modes with a voice coil/8 Ohm direct.
The frequency-dividing network shall have
a crossover frequency of 3 kHz with a slope
of 18 dB per octave (3rd order). Rated power
capacity shall be at least 100 Watts continu-
ous power (RMS), and shall conform to
EIA-426-B testing. Maximum continuous
output at 1 meter shall be 112.5 dB.
SoundTube’s Technical Measurement
Center (TMC) are analyzed using a
variety of standard measurement tech-
niques, including Measured Length
Sequence (MLS) and Time Delay Spec-
trometry (TDS). Performance, develop-
ment and data acquisition tools include:
Gold Line TEF 20, CLIO, LMS, LEAP, and
proprietary modeling software. EASE™
data are acquired through an automated
TEF 20/Outline/EASE™ interface.
Patented SoundTube
Technologies
SoundTube entertainment is consis-
tently developing new technologies that
enhance audio product performance.
SoundTube Entertainment innovations
are protected by multiple U.S. and
international patents, which explicitly
cover SoundTube dome, enclosure
mounting and dispersion technolo-
gies. SoundTube Entertainment actively
defends its patents in order to protect
SoundTube resellers and end-users.
EASE™ Data – 3-D polar plots.
The low-frequency transducer shall have
a treated fiber cone and cloth surround.
SoundTubeSPEC™ – Proprietary
SoundTube speaker placement software.
Installation for the HP690i shall be by 10’
aircraft cable affixed to the speaker chassis
hook. For seismic and safety redundancy,
a secondary aircraft cable shall be included
and shall attach to the speaker chassis via
hook and cable system. The external wiring
shall be a 4-pin 5 mm Euroblock connector
for 8 Ohm or distributed systems and shall
accept from 10 – 22 gauge wire. The system
shall be for indoor and outdoor applications
and have a weather-resistant terminal boot
covering all wire connections.
Technical Data and
Specification Tools
Architectural Specifications
The loudspeaker shall consist of a 165
mm (6.5 in) low-frequency transducer
and a high frequency transducer with a
1” exit and a frequency-dividing network
installed in a ported enclosure. The low-
frequency voice coil diameter shall be 34
mm (1.36 in).
Technical Data
SoundTube Entertainment strives to
provide complete and effective technical
information and data to dealers,
engineers and designers. All data are
available from SoundTube Entertain-
The performance specifications of a
typical production unit shall be as follows:
Useable frequency response shall extend
from 62 Hz – 22 kHz (-10 dB, no external
Data Acquisition
The enclosure shall be constructed of
injection-molded, glass reinforced ABS. The
All performance data acquired at
Polar Plots
N/A
™
™
Technical data, EASE plots, SoundTubeSPEC software & product downloads available at www.soundtube.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Open Ceiling Speaker
HP690i
Preliminary Technical Information for System Engineers
grille shall be constructed of iridite-plated,
powder-coated steel for lasting perfor-
mance in the elements. Overall cabinet
dimensions shall be no more than 363.6
mm (14.31 in) in height by 307.3 mm (12.10
in) in diameter and weigh no more than
7.3 kG (16.2 lbs).
Mechanical Drawings
The HP690i shall ship with hanging
hardware, Euroblock connector and ter-
minal weather boot. Optional accessories
for the HP690i include surface-mount
bracket (AC-RS-SM6), 20’ hanging cable
(AC-RS-HH-20) and 10’ split loom tubing
(AC-SLT-10) for architectural applications.
363.6 mm (14.31 in)
The system shall be the HP690i with
hanging hardware for both low- and high-
impedance applications.
SoundTube Entertainment
307.3 mm (12.10 in)
6430 North Business Park Loop
Park City, Utah 84098
Phone 435.647.9555
Included Accessories
Fax
435.647.9666
Toll Free 800.647.TUBE
Hanging Hardware: Main & Safety
Cables w/ SpeedClamp™
SoundTube’s hanging cable kit incorpo-
rates hanging & safety cables & fasten-
ers for an integrated and easy-to-install
system. Hanging & safety cables are
infinitely adjustable to 2.74 M (9.0 ft).
Optional Accessory
463.80 mm (18.26 in)
346.45 mm
(13.64 in)
Surface-Mount Bracket (AC-RS-SM6)
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing
All SoundTube products are designed and engineered in the USA.
Download from Www.Somanuals.com. All Manuals Search And Download.
|