Surface-Mount Speaker
SM590i
Preliminary Technical Information for System Engineers
Key Features
• High-power output (108.5 dB) for longer
throw and higher SPL requirements.
• One 133 mm (5.25 in) polypropylene
woofer and one 25 mm (1.0 in) horn-
loaded convex aluminum dome tweeter
mounted to a proprietary cast-alumi-
num HP5TM baffle & heat sink.
Mounting hardware included
Specifications: SM590i
System Type
5.25” Coax, open-ceiling, ported (33 Watt transformer for
• 89.5 dB Average sensitivity offers high
output capabilities and reduced amplifi-
cation costs.
25/70.7/100 Volt or voice coil / 8 Ohm direct)
71 Hz - 22 kHz
61 Hz - 20 kHz
160 Watts
80 Watts
108.5 dB
89.5 dB
8 Ohm (nominal value)
166º (average)
88º (average)
5.69 (Averaged 100 Hz - 10 kHz); 5.87 @ 2 kHz
6.12 dB (Averaged 100 Hz - 10 kHz); 7.69 dB @ 2 kHz
6-Position rotary switch with voice coil direct (8 Ohm)
Frequency Response (- 3 dB)1
Low Frequnecy (-10 dB)1
Max. Program Power
• Weatherized components for indoor/
outdoor applications. Includes a
tool-free SpeedLeverTM captured ball
mounting system for a fast & secure
installation.
Max. Continuous Power RMS2
Max. SPL dB @ 1 M
Sensitivity dB @ 1W/1M3
Impedance (nominal)
Coverage Angle (-6 dB @ 500 Hz)
Coverage Angle (-6 dB @ 4 kHz)
Directivity Factor (Q)
• Included accessories: Mounting hard-
ware, Euroblock connector & terminal
weather boot.
Directivity Index (DI)
Tap Selector
• Vertical and horizontal pivoting offer
precision aiming for indoor & outdoor
applications.
Transformer Taps
70.7 V Output
33 W 104.5 dB
17 W 102 dB
9 W 99 dB
6 W 97.5 dB
3 W 97.5 dB
100 V Output
33 W 104.5 dB
17 W 102 dB
9 W 99 dB
25 V Output
5 W 96.5 dB
2.5 W 93.5 dB
1.3 W 90.5 dB
0.63 W 87.5 dB
• Easy access 6-position selectable tap
switch for 25, 70.7 & 100 Volt applica-
tions with voice coil/8 Ohm direct sim-
plifies ordering and inventory tracking.
6 W 97.5 dB
• Optional accessories: Pole-Mount Adap-
tor, Bent Shaft, U-Bracket.
Transducers
Low Frequency Driver
High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround
25 mm (1.0 in) Convex aluminum horn-loaded tweeter
25 mm (1.0 in)
3 kHz
• High quality black or white paint finish.
Description
Network Type
Low Pass
High Pass
Enclosure Material
Motor Board
Grille
Inputs
Colors
Length
Height
The SM590i is a high-powered 5.25”
2-way horn-loaded loudspeaker in a ported
surface-mount enclosure design. The SM590i
incorporates a low-profile grille, proprietary
HP5TM motor-board and 6-position tap
switch with voice coil/8 Ohm direct. Hang-
ing hardware is included and features a
fast-action Speed-LeverTM for easy and secure
installation with a proprietary captured ball
mounting system. Optional accessories
include a pole mount adaptor, a bent shaft
and a u-bracket.
N/A
12 dB per octave, 2nd order
Drawn aluminum backcan with ABS baffle
Cast aluminum
Iridite-plated steel with powder-coat finish
4 Pin, 5 mm Euroblock for individual or daisy chain connection
Black or white
305.1 mm / 12.01 in
316.9 mm / 12.48 in
216.6mm / 8.53 in
4.3 kG / 9.5 lbs
Width (including bracket)
Weight
Shipping Weight
10 kG / 22.0 lbs (2 per box)
Accessories
Included
Hanging hardware, Euroblock connector & terminal
weather boot
Applications
Engineered for high-SPL and effective
low-end response (61 Hz @ - 10 dB), the
SM590i delivers consistent high-perfor-
mance music and paging for applications
requiring longer throw or higher volume
above the existing ambient noise level.
The SM590i is ideal for suface-mount
sound reinforcement/PA in applications
with high ambient noise levels including
casinos, warehouses, airports, transporta-
Optional
U-Mount Bracket (AC-SM-UB5), Pole Mount Adaptor
(AC-SM-PMA5), Bent Shaft (AC-SM-BS5)
2 Per box, can ship as single
Packaging
1
2
3
Frequency response is measured in half space and includes a low-frequency peak > + 3 dB.
Continuous power rating, EIA-426-B test.
2.83 Volts at a distance of 1 meter.
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube’s drive for constant improvement.
© 2006 SoundTube Entertainment. All rights reserved. PN TS-SM590 REV 03.03.06
Download from Www.Somanuals.com. All Manuals Search And Download.
Surface-Mount Speaker
SM590i
Preliminary Technical Information for System Engineers
Data Acquisition
minum ball. For seismic and safety redun-
dancy, a secondary aircraft cable shall
be included and attached to the speaker
chassis via ¼ - 20 bolt. The external wir-
ing input connector shall be a 4-pin, 5 mm
Euroblock for 8 Ohm or distributed sys-
tems and shall accept from 10 – 22 gauge
wire.
Useable frequency response shall extend
from 61 Hz – 22 kHz (-10 dB, half space,
All performance data acquired at
SoundTube’s Technical Measurement
Center (TMC) are analyzed using a
variety of standard measurement tech-
niques, including Measured Length
Sequence (MLS) and Time Delay
Spectrometry (TDS). Performance,
development and data acquisition tools
include: Gold Line TEF 20, CLIO, LMS,
LEAP, and proprietary modeling soft-
ware. EASE™ data are acquired through
an automated TEF 20/Outline/EASE™
interface.
no external equalization). Measured
sensitivity (2.83 Volt input, 1 meter) shall
be at least 89.5 dB. The speaker shall
have a nominal impedance of 8 Ohms
and shall be available for 25/70.7/100
Volt modes with voice coil/8 Ohm
direct. The frequency-dividing network
shall have a crossover frequency of 3
kHz with a slope of 12 dB per octave
(second order) for the high-pass filter.
Rated power capacity shall be at least
80 Watts continuous power (RMS), and
conforms to EIA-426-B testing. Maxi-
mum continuous output at 1 meter shall
be 108.5 dB.
The system shall be for indoor/outdoor
applications and shall have a weather-
resistant terminal boot covering all
wire connectors. The enclosure shall be
constructed of injection-molded, glass-
reinforced ABS. The grille shall be con-
structed of iridite-plated, powder-coated
aluminum for lasting performance.
EASE™ Data – 3-D polar plots.
SoundTubeSPEC™ – Proprietary
Overall cabinet dimensions shall be no
more than 316.9 mm (12.48 in) in height by
216.6 mm (8.53 in) in width by 305.1 mm
(12.01 in) in depth (including SM bracket).
The SM590i shall include mounting hard-
ware, Euroblock connector & terminal
weather boot.
SoundTube speaker placement software.
The low-frequency transducer shall
have a polypropylene cone with butyl
rubber surround. The high-frequency
transducer shall be constructed of alu-
minum material and incorporate a high-
SPL horn.
Architectural Specifications
The loudspeaker shall consist of a 133
mm (5.25 in) low-frequency transducer
and a 25 mm (1 in) high-frequency
transducer with a frequency-dividing
network installed in a ported enclosure.
The low-frequency voice coil diameter
shall be 25 mm (1 in).
Installation for the SM590i shall
be by proprietary & corrosion-resis-
tant captured-ball mounting system.
SoundTube’s tool-free captured-ball
mounting system incorporates a locking
zinc alloy lever attaching to a cast-alu-
The system shall be the SoundTube
SM590i with mounting hardware for both
low and high impedance applications.
Performance specifications of a typi-
cal production unit shall be as follows:
Polar Plots
250 Hz
500 Hz
1,000 Hz
125 Hz
4,000 Hz
8,000 Hz
10,000 Hz
2,000 Hz
™
™
Technical data, EASE plots, SoundTubeSPEC software & product downloads available at www.soundtube.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Surface-Mount Speaker
SM590i
Preliminary Technical Information for System Engineers
SoundTube Entertainment
Mechanical Drawings
6430 North Business Park Loop
Park City, Utah 84098
216.6 mm (8.53 in)
Phone 435.647.9555
Fax
435.647.9666
Toll Free 800.647.TUBE
All SoundTube products come
with a 5-year limited warranty.
316.9 mm (12.48 in)
305.1 mm (12.01 in)
Installation
Unlocked
Locked
SoundTube’s SM590i is a surface-mount
speaker designed to mount to a wall, pole,
ceiling or other rigid structure. Vertical &
horizontal pivoting offer unlimited aiming for
indoor & outdoor applications.
Optional Accessories
U-Mount Bracket (AC-SM-UB5)
Pole Mount Adaptor (AC-SM-PMA5)
Bent Shaft (AC-SM-BS5)
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing
All SoundTube products are designed and engineered in the USA.
Download from Www.Somanuals.com. All Manuals Search And Download.
|