STACKING KIT INSTALLATION
Tools Required
IMPORTANT
For built-in applications only!
Ensure the anti-tip brackets are installed
per the installation and operating
manual that came with the cabinet.
Never install if used with caster kits or
extended leg kits.
Drill
Phillips
Screwdriver
5/32" Drill Bit
Parts Required
MODEL
HP24 &
HH24 &
Part Number
Description
HP15
HP48
HP72
HC24
HA24-18
63965
LATCH STRIKE
15" Grille
24" Grille
15" Mounting Plate
24" Mounting Plate
2
1
2
2
4
6
65700-2
65733-4
68094-15
68094-24
1
1
1
2
3
1
68094-24x18 24"x18" Mounting Plate
1
68094-48
68094-72
C31323
48" Mounting Plate
72" Mounting Plate
1
1
12
Bumper, Adhesive Poly
4
4
4
4
4
4
8
6
1/4-20 X 1/2" MACHINE
SCREW
M00885-189
M50050-466
6
5
#10 X 1/2" SHEET METAL
SCREW
2
2
2
5
BUMPER, ADHESIVE POLY
LATCH STRIKE
1/4-20 X 1/2" MACHINE SCREW
#10 X 1/2" SHEET METAL SCREW
Grille
15" & 24" Mounting Plate
48" & 72" Mounting Plate
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com
Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning
-1-
Download from Www.Somanuals.com. All Manuals Search And Download.
95010 REV C
STACKING KIT INSTALLATION
Step 3: Attach mounting plate (where the leg levelers were removed
in step 2) by using 1/4-20 machine screws . Flange should be
pointing away from the bottom of the unit.
Bottom of
cabinet
Flange
Step 4: Place upper unit on top of lower unit and attach using #10
sheet metal screws (where the rivets were drilled out in step 1).
7
68 "
8
NOTE: EXTENSION OF LEG LEVELERS
WILL INCREASE ASSEMBLY HEIGHT
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com
Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
95010 REV C
STACKING KIT INSTALLATION
Step 5: Attach -4- bumpers and -2- latch strikes to each new grille.
Orient tabs vertically. Attach grille assemby to upper unit.
Move stacked assembly into final position by pushing lower unit.
This edge
vertical.
Bumper
Note:When using stacking kit to join -2- HH24
or HC24-18 units, a wall mount anti-tip kit
must be installed. See cabinet manual
for instructions.
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com
Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
95010 REV C
|