AUTO ZOOM ELECTRONIC
FLASH UNIT
OPERATING MANUAL
Please read this operating manual carefully first for proper use.
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR THE SAFE USE OF YOUR FLASH UNIT
Although we have carefully designed this flash unit for safe operation, please be sure to follow precautions given on
WARNING
This symbol indicates that violating this item could cause serious personal injuries.
CAUTION
This symbol indicates that violating this item could cause minor or medium personal injuries, or material losses.
is a symbol indicating items that are prohibited.
is a symbol emphasizing a warning.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
WARNING
CAUTION
The flash contains electronic circuits that
operate at high voltages. Do not attempt to
disassemble the flash unit yourself, as there is
danger of an electric shock.
Do not use the flash near anyone’s eyes, as it
may hurt them. Be particularly careful with the
flash around infants.
The following may lead to an explosion or fire.
● Shorting the batteries
● Exposing the batteries to flames
● Dismantling the batteries
If internal parts of the flash unit becomes
exposed due to impact, etc., do not touch them
as there is danger of an electric shock.
● Remove the sticker covering the battery.
● Attempting to recharge non-rechargeable
batteries
Do not expose the flash unit to water or
moisture as there is danger of an electric
shock.
Remove the batteries from the camera
immediately if they become hot or begin to
smoke. Be careful not to burn yourself during
removal.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Precautions for Your Flash Unit
● Never use organic solvents such as paint thinner, alcohol or benzene to clean the flash unit.
● Avoid leaving the flash unit for extended period in places where the humidity and temperature are very high
such as in a car.
● Be careful not to subject the flash unit to strong vibrations, shock or pressure. Use a cushion to protect the flash
unit when carrying it in a motorcycle, car, boat, etc.
● Do not use the flash unit where it may be directly exposed to rain, water, etc.
● Replace all the batteries at the same time. Do not mix battery brands, type or an old battery with a new one. It
may cause explosion or overheating.
● When using the flash unit off the camera, do not try to attach any metallic object to the electric contacts or to
mount incompatible accessories. Otherwise, the TTL auto mechanism may be damaged or rendered
inoperable.
● Periodic checks are recommended every 1 to 2 years in order to maintain high performance. If the unit has not
been used for an extended period of time, or is being readied for an important shoot, it is recommended that
you take a test flash with the test button and test shoot with it. Test flash is also important to maintain optimum
performance.
● Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc. When the flash unit is subjected to rain
or moisture, wipe it off with a dry soft.
● When photographing black subjects or white subjects, use exposure compensation.
● Do not attach any accessories having either fewer or different (layout other than PENTAX standard) electrical
contacts for the hot shoe or grip. Otherwise, some functions may not work properly.
● We will not be held responsible for any accidents or damage, etc. caused due to the use of this product with
cameras and accessories made by the other companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
■Cautions Regarding Batteries
● This flash unit uses four AA alkaline, lithium, or nickel metal hydride batteries. Do not use any other type of
battery. The flash unit may not be able to operate correctly or demonstrate sufficient performance, or the flash
unit itself may generate heat, depending on the type of batteries used.
● AA alkaline and lithium batteries themselves are not rechargeable. Also, do not dismantle the batteries. Trying
to recharge or dismantle these batteries may cause an explosion or leakage.
● When changing batteries, do not mix batteries of different manufacture, type and capacity.
● Do not insert the batteries with the positive (+) and negative (-) terminals the wrong way around. Incorrect
insertion may lead to an explosion or fire.
● Battery performance may temporarily be hindered in low temperatures. Batteries should be kept warm in
temperatures below freezing for proper performance.
● If you do not intend to use the flash unit for an extended period of time, remove the batteries. Leaving the
batteries in may cause damage to the flash unit due to leakage etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Contents
FOR THE SAFE USE OF YOUR FLASH
Supported Functions for PENTAX
Select Button (S)/Adjustment
Camera Format and Flash
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Names of Parts
ꢀ Bounce angle adjustment
ꢁ LCD panel
ꢂ Flash mode button
> Bounce lock release button
S Battery chamber cover
Y Shoe lock pin
ꢃ Select button
ꢄ Adjustment dial
G Flash signal contacts
T Shoe foot
ꢅ LCD panel illumination button/ Format button
ꢆ Zoom button/ Channel button
ꢇ Test button/ Modeling button/ Ready lamp
ꢈ Setting switch
V Locking lever
ꢉ Power switch
ꢊ Wireless mode button
@ Sync mode switch
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ꢀ
ꢁ
ꢅ
ꢆ
ꢊ
ꢋ
ꢌ
ꢂ
ꢃ
ꢇ
ꢈ
ꢄ
ꢍ
ꢉ
ꢎ
ꢏ
ꢐ
Download from Www.Somanuals.com. All Manuals Search And Download.
7
[ 5P Sync socket
W External power source socket
K Socket cover
ꢒ
ꢑ
Q Slave sensor
R Wide-angle panel
" Catchlight panel
= Flash head
ꢗ
ꢖ
ꢓ
C AF spotbeam emitter
U Auto flash sensor
ꢙ
ꢘ
ꢔ
ꢕ
Download from Www.Somanuals.com. All Manuals Search And Download.
8
■Major bundled items
ꢀ Stand
ꢁ Case
ꢂ Operating manual (this manual)
ꢃ Certification
Opening of
the stand
Slide the hot shoe bracket into the opening of the
stand.
● You cannot attach the off-camera shoe adapter F
to the bundled stand.
● When attaching the flash unit to the stand, do not
tighten the locking lever too far. Tightening too
far may cause the locking lever to not lock
sufficiently when the flash unit is removed from
the stand and attached to the hot shoe of the
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
■LCD Panel Indicator
ꢀ Zoom indicator
: A.Zoom ➝ M.Zoom xxmm = 20, 24, 28, 35, 50, 70, 85 (35 mm format)
35, 45, 55, 70, 100, 135, 150 (645 format)
55, 60, 70, 90, 120, 180, 190 (67 format)
13, 16, 19, 24, 34, 48, 58 (DIGITAL camera
(K series, *ist D series))
25, 30, 35, 43, 62, 87, 106 (645D)
ꢁ Format indicator
: 35mm ➝ 645 ➝ 67 ➝ DIGITAL
: P-TTL ➝ A ➝ M ➝ SB
ꢂ Flash mode indicator
ꢃ Flash output
: -3.0 to +1.0 steps, 0.5 step increments
compensation indicator
ꢄ ISO indicator
: ISO 25 to 1600
ꢅ Bar graph
ꢆ Effective flash range
: Minimum distance - Maximum distance (in P-TTL, TTL, A modes)
Minimum distance (in manual mode)
indicator
ꢇ AF spotbeam
: SB
ꢈ
Sync mode indicator
:
(Leading curtain sync) -
(Trailing curtain sync) -
(Contrast
control sync) - (High-speed sync)
ꢉ Bounce flash warning
:
ꢊ
Flash output adjustment : NN/ X X
indicator
f/stop
: F2 to F22 (When set to ISO 100)
: 1 to 4CH
Wireless mode indicator : MASTER, CONTROL, SLAVE
Download from Www.Somanuals.com. All Manuals Search And Download.
@ Channel indicator
>
10
ꢀ
ꢋ
ꢉ
ꢁ
ꢂ
ꢃ
ꢄ
ꢈ
ꢇ
ꢅ
ꢆ
ꢊ
When in poorly lit locations and the LCD panel cannot
be seen, pressing the LCD panel illumination button
(LIGHT) will illuminate the panel for about 10 seconds.
Pressing it again will turn off the illumination.
● The camera's LCD panel lights up also when you
press the LCD illumination button (LIGHT) and
the exposure metering timer is on for the
following camera.
Auto Check Display
If the correct flash output is obtained, the flash mode
indicator and ( ) in the viewfinder will begin blinking.
If the auto check display does not blink, the flash output
is insufficient. Verify the effective flash range (refer to
the aperture further.
Even if the auto check display is blinking, the flash
output may be incorrect if the subject is too close.
● Depending on the combination of flash mode
and camera, the auto check display may not
display correctly
MZ-S
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Types of Batteries
This flash unit uses four AA batteries of the same type,
as shown below.
- Alkaline battery (LR6)
■Using the Optional External Power
Source
Use the optional TR Power Pack-3 (sold separately) as
an external power source.
● For information on how to use the TR Power
Pack-3 and connect to the flash unit, refer to the
manual provided with the TR Power Pack-3.
● For information on how to recharge the
flash unit using the TR Power Pack-3, refer to
● The TR Power Pack-2 cannot be used with the
AF540FGZ for mechanical reasons.
- Lithium battery (FR6)
- Nickel-Metal Hydride battery (Ni-MH)
(Nickel manganese (Ni-Mn) and nickel cadmium (Ni-
Cd) batteries cannot be used.)
● For information about recycling times and total
number of flashes, refer to “Specifications” on
● If the indicators on the LCD panel or the ready
lamp does not light up, the batteries may be
exhausted or not inserted correctly. Verify the
orientation of the batteries or, if the indicators
and ready lamp still do not light up, replace them
with new batteries.
● If you let the flash unit discharge successively
using lithium batteries, the batteries will
overheat, activating a safety circuit that
temporarily disables the flash unit. If this occurs,
rest the flash unit so that the temperature of the
batteries returns to normal.
The external power source uses six C-size alkaline
batteries (LR14).
(Nickel cadmium (Ni-Cd) batteries cannot be used in the
TR Power Pack-3.)
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Mounting to Camera
1
2
Remove the hot shoe cover from the camera.
1
2
●
The following cameras have a shoe lock pin. When
attaching the flash unit, turn the locking lever in
Attach the flash unit to the camera.
ꢀTurn the locking lever of the flash unit in the
direction opposite to that indicated by (FIX➝)
(clockwise from the direction of the LCD
panel).
the (FIX➝) direction and lock the flash unit to the
camera with the shoe lock pin. When releasing the
flash unit, be sure to do so after turning the
locking lever in the direction opposite to that
ꢁSlide the hot shoe foot of the flash unit into the
camera's hot shoe from the back of the
camera forward.
ꢂTurn the locking lever of the flash unit in the
direction indicated by (FIX➝) to lock it.
indicated by (FIX➝) and loosening the shoe lock
pin. Otherwise, the hot shoe will be damaged.
645D, K-x, K-7, K-m/K2000, K20D, K10D, K200D,
K110D, K100D Super, K100D, *ist D series, *ist,
MZ-S, MZ-L/ZX-L/MZ-6, MZ-60/ZX-60
● The 672 does not come with a hot shoe. The
optional hot shoe grip 672 should be used.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Turning the Power On
Sliding the power switch to the (ON) position will turn
on the power. The ready lamp will light up when the
flash is charged. Sliding it to the (OFF) position will turn
off the power.
If charging time takes more than 20 seconds, the
batteries have been exhausted and should be replaced
with new batteries. If the flash unit is used with
exhausted batteries, the settings may return to their
default configuration.
● Turn the camera on before turning the flash unit
on.
● The WIRELESS position of the power switch is
used for wireless mode and slave flash. For
details, see the explanations for each function.
Ready lamp
➝
➝
Download from Www.Somanuals.com. All Manuals Search And Download.
15
●
When turning off the flash unit, make sure you
turn the power switch of the external power
source to OFF. Otherwise the external power
source may be exhausted.
■Charging the AF540FGZ with the
Optional External Power Source
Prepare the external power source TR Power
1 Pack-3 in accordance with the instruction in the
operating manual.
■Switching the Charging Mode
You can select a charging mode from among the
following.
Confirm that the power switch of the flash unit
2 and TR Power Pack-3 is turned to OFF. Then,
plug the power cord into the external power
socket on the flash unit.
PP1: Charge the flash unit using only the external
power source.
Turn the power switch of the external power
PP2: Charge the flash unit using the external power
source and internal batteries. (Enables high
speed charging with a charging interval of
approximately 2 seconds.)
3 source and the power switch of the flash unit to
ON. When charging is complete the ready lamp
of the flash unit will light up.
Slide the setting switch up.
When using the external power source, do not
remove the batteries from the AF 540 FGZ:
otherwise, the flash unit will not function.
1
Press the LCD panel illumination button (LIGHT)
2 for 2 seconds or more.
●
The TR Power Pack-3 is equipped with a pilot
lamp which lights up to indicate that the power is
activated. Note that a lit lamp does not indicate
that the flash unit is ready for use. Make sure the
ready lamp on the flash unit is lit before
discharging the flash unit.
SL 1 or SL 2 will be displayed.
Press the flash mode button (MODE) twice.
3 PP1 or PP2 will be displayed.
Press the select button (S) the number of times
4 required to select PP 1 or PP 2.
Press the LCD panel illumination button (LIGHT).
5 The LCD panel returns to the normal display.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
■Auto Power Off Function
When the flash unit is left unused for about 3 minutes
with the power switch set to the (ON) position, it
automatically switches off to save the power.
■Quick Power On Function
If the flash unit is mounted on autofocus cameras,
press the shutter release button half way to turn on the
power.
● The Quick Power On function can be utilized
both when only internal batteries are used and
when an external power source is used.
Slide the setting switch up.
1
Press the LCD panel illumination button (LIGHT)
2 for 2 seconds or more.
SL 1 or SL 2 will be displayed.
Press the flash mode button (MODE).
3
Press the select button (S) the number of times
4 required to select PH 1 or PH 2.
PH1: Enables the auto power off function.
PH2: Disables the auto power off function.
Press the LCD panel illumination button (LIGHT).
5
● The Auto Power Off function can be utilized both
when only internal batteries are used and when
an external power source is used.
● In the auto flash mode (A), the power will shut off
after about 6 minutes.
● In the wireless mode, the power will turn off after
about 1 hour of non-operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Select Button (S)/Adjustment Dial Functions
4 types of settings are available as shown on the following pages for the select button (S) and the adjustment dial.
ꢀ
ꢁ
Turn the adjustment dial and adjust the blinking
■Procedure
2 number.
Press the select button (S) so that the number to
1 adjust is blinking.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
After adjustment, press the select button (S) and
3 stop the blinking. Adjust the other items below
using the same procedure.
● When using multiple flash units set to P-TTL or
TTL Auto and adjusting the amount of light at the
same time, use the camera’s exposure
compensation.
ꢂ
Connected Flash Mode
Adjustment Range
Flash output compensation
ISO / F (aperture) setting
Manual flash output
P-TTL Auto flash
Auto flash (A)
Manual (M)
-3.0 to +1.0 levels (EV) (0.5 step increments)
ISO 25 to ISO 1600, F2 to F22 (with ISO100)
1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64
Wireless (W) master flash (M)
Wireless (W) slave flash (S)
Flash output setting
1/1, 2/3, 1/2, 1/3
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Camera Format and Flash Coverage Angle
The AF540FGZ’s flash coverage angle can be adjusted
■Format setting
Firstly, set the FORMAT to match the image size
of the camera you are using.
1
to match the angle of view of the lens being used,
which enables effective distribution of the flash light.
The flash coverage angle is indicated by the focal
lengths of available lenses in the LCD panel of the flash
unit, according to the preset image size (FORMAT) of
the camera.
The format size will automatically be set when
the shutter release button is pressed halfway
down when the AF540FGZ is used in
combination with the following cameras.
645D, K-x, K-7, K-m/K2000, K20D, K200D,
K100D Super, K10D, K110D, K100D, *ist DL2,
*ist DS2, *ist DL, *ist DS, *ist D, *ist,
MZ-L/ZX-L/MZ-6, MZ-S
For other cameras, before use, set the FORMAT
to match the image size of the camera according
to the following procedure.
ꢀSlide the setting switch down (yellow dot).
ꢁPress the FORMAT button repeatedly to
display camera formats (image sizes) in the
LCD panel.
You can switch from 35mm ➝ 645 ➝ 67 ➝
DIGITAL ➝ 35mm in that order.
ꢁ
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
20
the focal length of the lens by pressing the shutter
release button of the camera halfway down.
The auto zoom function operates while the
exposure metering timer is operating (while
information is being displayed in the viewfinder).
ꢀIf you are setting the format manually, return the
setting switch to the upper (white dot) position.
ꢁWhen (M.Zoom) is displayed on the LCD
panel, press the zoom button (ZOOM)
repeatedly until (A.Zoom) is displayed.
● When the flash mode is set to auto flash, the
auto zoom function does not operate even if the
camera and lens are both autofocus. Set the
zoom manually to match the lens angle of view.
ꢀ
ꢁ
■Manual Zoom (M.Zoom)
If one or both of the camera and lens are manual
focus, you must set the flash coverage angle
manually.
■Zoom position (Flash coverage
angle) setting
Next, set the zoom (flash coverage angle) to
match the focal length of the lens you are using.
2
ꢀ
If you are setting the format manually, return the
setting switch to the upper (white dot) position.
ꢁPress the zoom button (ZOOM) until the focal
length of the lens being used is displayed on
the LCD panel or if it can not be displayed
exactly one wider than the lens focal length.
The zoom position is switched in the order
■Auto Zoom (A.Zoom)
If both the camera and lens are autofocus, you can
automatically set the flash coverage angle according to
Download from Www.Somanuals.com. All Manuals Search And Download.
21
● In the manual zoom mode, refer to the LCD panel
and set it so the flash coverage angle matches
the lens focal length or set a flash coverage
angle that is shorter than the lens focal length.
Zoom Positions for Each Format
* With the wide-angle panel
35mm camera
645 camera
67 camera
Digital camera
(K series, *ist D series)
Digitalcamera
(645D)
20mm*
24mm
28mm
35mm
50mm
70mm
85mm
35mm*
45mm
55mm*
60mm
13mm*
16mm
19mm
24mm
34mm
48mm
58mm
25mm*
30mm
35mm
43mm
62mm
87mm
106mm
55mm
70mm
70mm
90mm
100mm
135mm
150mm
120mm
180mm
190mm
● When the wide-angle panel is used, the zoom
button (ZOOM) will not work. (The wide-angle
panel is in a slit on the top of the flash head. Pull
it out so that it covers the front of the flash head.
If the catchlight panel is not necessary, leave it in
the slit.)
Download from Www.Somanuals.com. All Manuals Search And Download.
22
● In the (A.Zoom) mode, the flash coverage angle
will be adjusted automatically to suit the lens
focal length when you press the shutter release
button halfway, and the camera exposure
metering timer is on.
● A warning signal appears as follows when the
flash cannot cover the focal length of the
camera.
● In the (A.Zoom) mode, if there is no lens focal
length information, the flash coverage angle will
be set automatically to 24mm with a 35mm
camera. With a 645 camera, it will be set to
45mm, with a 67 camera it will be 60mm, with a
digital camera (K series, *ist D series) it will be 16
mm, and with a digital camera (645D) it will be
30mm.
- The zoom indicator blinks for the combination of
the following camera and lenses.
● When using the wide-angle panel, the angle will
be fixed at 20 mm for a 35 mm camera, 35 mm for
a 645 camera, 55 mm for a 67 camera, 13 mm for
a digital camera (K series, *ist D series), and
25mm for a digital camera (645D) in both A.Zoom
and M.Zoom.
Camera
*ist D series
Lens Types
DA, D FA, FA J, FA, F
35mm autofocus single
lens reflex cameras
D FA, FA J, FA, F
FA645
645N2, 645N
- The warning signal does not appear for the
combination of the following cameras and focal
lengths.
Camera
Focal length
*ist, MZ-L/ZX-L/MZ-6,
MZ-S
20 mm and over, less
than 24 mm
13 mm and over, less
than 16 mm
*ist DL, *ist DS, *ist D
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Using the Flash Modes
The AF540FGZ has the following flash modes. Select
the mode best suited for the subject.
Before photographing, confirm the following.
1. Whether your camera supports the desired flash
mode.
TTL auto flash (TTL)
Based on the amount of light reflected off the film of the
camera, the camera adjusts the flash output
automatically to obtain a correct exposure. Refer to
➝ Cameras that Support Each Flash Mode
2. Whether you can use the desired function with
the combination of your camera and the flash
mode you have set.
Auto flash (A)
The built-in flash metering sensor adjusts the flash
output automatically. Use with cameras that are not P-
instructions on how to use this flash mode.
➝ Functions Related to Each Flash Mode
Manual flash (M)
When the camera is set to manual exposure, manual
flash can be set to suit the subject distance and
aperture. The manual flash output can be set to 1/1,
instructions on how to use this flash mode.
P-TTL auto flash (P-TTL)
A pre-flash is discharged before the main flash so that
the multi-segment metering sensor can measure the
subject's distance, brightness, brightness difference,
backlit condition, etc. The data obtained is incorporated
to set the output of the main flash. This mode obtains
more accurate results than with the conventional TTL
this flash mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Set the sync mode switch to leading curtain sync
■P-TTL Auto Flash
3 (
), trailing curtain sync (
contrast-control ( ), according to the
), or
Effective flash range
● After turning the power (ON), the setting will be
(P-TTL) and (A.Zoom).
Set the zoom position. (The setting method
4 differs according to your camera and lens. Refer
Confirm that the subject is within the effective
ꢄ
ꢃ
5 flash range and the ready lamp is lit. Then take a
ꢁ
picture.
● In the following cameras, if the correct flash
output is obtained, the flash mode indicator and
ꢀ
ꢂ
(
) in the viewfinder will blink.
*ist, MZ-S, MZ-L/ZX-L/MZ-6
of this flash mode.
For details, refer to “Auto Check Display” on
● The correct flash output is obtained in P-TTL
auto mode only when the flash unit is used with
autofocus lenses.
● If necessary, an exposure compensation amount
can be set between +1.0 to -3.0 steps in 0.5-step
Procedure
Turn on the flash unit.
1
Press the flash mode button (MODE) until
2 (P-TTL) is displayed on the LCD panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Procedure
■TTL Auto Flash
of this flash mode.
Turn on the flash unit.
1
Press the flash mode button (MODE) until (TTL)
2 is displayed on the LCD panel.
Set the sync mode switch to leading curtain sync
3 (
), trailing curtain sync (
contrast-control (
), or
), according to the
Set the zoom position. (The setting method
4 differs according to your camera and lens. Refer
ꢁ
ꢃ ꢄ
Confirm that the subject is within the effective
5 flash range and the ready lamp is lit. Then take a
picture.
ꢀ
● In the following cameras, if the correct flash
output is obtained, the flash mode indicator and
ꢂ
(
) in the viewfinder will blink.
35 mm single lens reflex cameras except for SF7/
SF10, 672, 645N2, 645N, 645, LX, Super A/
Super Program
For details, refer to “Auto Check Display” on
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Set the zoom position. (The setting method
Procedure
5 differs according to your camera and lens. Refer
Turn on the power switch.
1
● Select (M.Zoom) regardless of the type of lens
being used.
Press the flash mode button (MODE) until (A) is
2 displayed on the LCD panel.
Confirm that the subject is within the effective
6 flash range and the ready lamp is lit. Then take a
Set the aperture value and ISO.
3
picture.
ꢀPress the select button (S) so that (f/stop) on
● In the following cameras, if the correct flash
output is obtained, the flash mode indicator and
the LCD panel blinks.
ꢁTurn the adjustment dial to set the aperture
value.
(
) in the viewfinder will blink.
645, LX, Super A/Super Program, MZ-M/ZX-M,
P30T, P30N/P3N, P30/P3, P50/P5, A3Date,
A3DateS, Program A/Program Plus
For details, refer to “Auto Check Display” on
● If the power is turned temporarily OFF, the flash
will be set to P-TTL or TTL auto. Return the
setting to Auto flash.
● The effective flash range is displayed on the LCD
panel bar graph.
ꢂConfirm that the subject is within the effective
flash range and press the select button (S).
ꢃTurn the adjustment dial to set the ISO after
(ISO) starts blinking.
ꢄPress the select button (S). The setting is
complete if (ISO) stops blinking.
● The sync mode will be fixed in leading curtain
sync.
Set the lens aperture to the same aperture value
4 as that set on the LCD panel.
● The camera's aperture value is synchronized
with that of the flash unit when the camera
exposure mode is set to Programmed AE or
Shutter Priority AE.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Procedure
■Manual Flash
of this flash mode.
Turn on the power switch.
1
Press the flash mode button (MODE) to display
2 (M) (1/xx) on the LCD panel.
● You can set the flash output from 1/1 to 1/64. See
Set the zoom position. (The setting method
3 differs according to your camera and lens. Refer
Set the lens aperture according to the distance to
ꢁ
ꢂ ꢄ
4 the subject.
Example:
If the flash zoom position is 50mm, subject distance
(between the AF540FGZ and subject) is 4 m, and
sensitivity is ISO 100, the calculation will be as
follows:
ꢀ
ꢀWith flash output (1/1), the Guide No. will be 45
(according to the Guide No. table).
ꢁAperture = Guide No. 45 / Subject distance 4 m =
11.25 Approx. 11 (f/Stop)
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Confirm that the subject is within the effective
5 flash range and the ready lamp is lit. Then take a
picture.
● In the following cameras, if the correct flash
output is obtained, the flash mode indicator and
(
) in the viewfinder will blink.
645, LX, MZ-M/ZX-M
For details, refer to “Auto Check Display” on
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Using the Sync Mode
The AF540FGZ has the following sync modes. Select
the mode best suited for the subject.
Before photographing, confirm the following.
1. Whether your camera supports the desired sync
mode.
➝ Cameras that Support Each Sync Mode
2. Whether you can use the desired sync mode with
the combination of your camera and the flash
mode you have set.
Trailing Curtain Sync Mode
In this sync mode, the flash is discharged at the instant
the second curtain begins its travel. This mode will
freeze the subject with a blur appearing after the
subject under a slow shutter speed condition. Refer to
High-Speed Sync Mode
This sync mode will enable flash synchronization with
shutter speeds faster than the X-sync speed. Since
there is no sync speed limitation, high-speed sync is
instructions on how to use this sync mode.
➝Functions Related to Each Flash Mode
3. Restrictions for the use of each sync mode.
Contrast Control Sync Mode
This sync mode enables you to photograph with
multiple flash units, utilizing the difference of the light
intensity of each flash unit. The ratio of flash light
intensity between the flash unit set to this sync mode
instructions on how to use this sync mode.
Leading Curtain Sync Mode
This is the most commonly used sync mode. In this
mode, the flash discharges at the instant the first
shutter curtain completes its travel. You can use this
mode with the shutter speed set to the X-sync speed or
this sync mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
■Leading Curtain Sync Mode
of this sync mode.
■Trailing Curtain Sync Mode
of this sync mode.
Procedure
Set the power switch to the (ON) position.
1
Set the sync mode switch to leading curtain sync
2 (
).
Confirm that the subject is within the effective
3 flash range and the ready lamp is lit. Then take a
picture.
Procedure
Set the power switch to the (ON) position.
1
Set the sync mode switch to trailing curtain sync
2 (
).
Confirm that the subject is within the effective
3 flash range and the ready lamp is lit. Then take a
picture.
● The flash unit will switch to the trailing curtain
sync mode when the shutter release button is
pressed halfway down.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Procedure
■High-Speed Sync Mode
of this sync mode.
Turn on the camera. Set the exposure mode to a
1 mode other than the Programmed AE.
shutter speed becomes faster, the guide number
becomes smaller. Accordingly, it should be
noted that the distance for taking pictures would
become shorter.
Attach the flash unit to the camera’s hot shoe and
2 turn it on.
Set the sync mode switch to high-speed sync
3 (
).
● The flash will be set to high-speed sync mode
and (
) will be shown on the LCD panel only
when the shutter speed exceeds X-sync speed.
To set exposure compensation, press the select
4 button (S) so that (0.0) blinks. Then turn the
adjustment dial to set the exposure
compensation amount. Press the select button
(S) again to stop the blinking.
The exposure compensation amount can be set
from +1.0 to -3.0 steps in 0.5-step increments.
ꢄ ꢆ
Set the zoom position. (The setting method
ꢃ
5 differs according to your camera and lens. Refer
ꢂ
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Check the flash range by looking at the bar graph
6 on the LCD panel.
Confirm that the subject is within the effective
7 flash range and the ready lamp is lit. Then take a
picture.
● Please read the camera operating manual for
camera operation.
● High-speed sync is possible with the camera
separated (wireless) from the AF540GZ. (Refer to
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Procedure
■Contrast Control Sync Flash
of this sync mode.
Extension Cord” on page 59 on using the
AF540FGZ detached from the camera.
Turn on the power switch.
1
Set the sync mode switch to contrast-control
2 (
).
Set the zoom position. (The setting method
3 differs according to your camera and lens. Refer
● If the AF540FGZ is much closer to the subject
than the flash unit to be used in combination,
use (M.Zoom) to set the zoom position to a
shorter lens focal length.
Turn on the flash units to be used in combination.
ꢂ ꢄ
4
● If the camera's built-in flash unit is part of the
combination, pop up the built-in flash.
ꢀ
ꢁ
Confirm that the subject is within the effective
5 flash range and the ready lamp is lit. Then take a
picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
With a single flash
With contrast control sync flash
● If you are using a single flash unit, you can only
perform leading curtain sync photography when
the sync mode switch is set to contrast-control
(
).
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Advanced Functions
■Wireless Mode
With the AF540FGZ, you can take photographs with
the flash unit separated from the camera wirelessly in
P-TTL mode.
Combine the flash unit with the built-in flash unit of the
camera or another AF540FGZ attached to the camera.
● The AF360FGZ can be used interchangeably with
AF540FGZ flash units for wireless mode
photography.
Before photographing, confirm the following.
1. Whether your camera supports this function.
➝ Cameras that Support Wireless Mode
Notes on Wireless Flash Control
(P-TTL photography)
When using the AF540FGZ in wireless mode, the
following information is transferred between the flash
units attached to the camera and separated from the
camera, before the flash units are discharged.
ꢀShutter release button is fully pressed.
ꢁThe flash attached to the camera emits a small
control flash (relays the flash mode of the
camera).
ꢂThe external AF540FGZ emits a pre-flash
(verifies the state of the subject).
ꢃThe flash attached to the camera emits a small
control flash (relays the flash output amount to
the external AF540FGZ).
2. Whether you can use this function with the
combination of your camera and the flash mode
you have set.
● The flash attached to the camera will emit a pre-
flash once more after this to relay the flash
duration time when HS (high-speed sync) is set.
ꢄThe external AF540FGZ discharges the main
flash (where both flash units discharge main
➝ Functions Related to Each Flash Mode
3. Whether the slave mode is set to SL1.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
● Control Flash and Main Flash
The purpose of the control flash of the wireless
mode is to send information to the other flash
unit before taking a picture. The main flash
discharges at the actual time a picture is taken in
the same manner as traditionally done.
● When setting up a flash unit separately from the
camera, use the off-camera shoe adapter F when
using a tripod, or the off-camera shoe clip CL-10
when setting up in another location such as
tabletop, chair, etc.
● Keep the distance from the built-in flash unit and
AF540FGZ to the subject within 4 meters.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Using the AF540FGZ in Combination with a Built-in Flash Unit
Setting switch
● The AF540FGZ can be used in combination with
a built-in flash unit only when used with the
following cameras.
*ist D, *ist, MZ-S, MZ-L/ZX-L/MZ-6, K10D (NOTE),
K20D, K200D, K-x, K-7, K-m/K2000
(NOTE)
However, this requires the firmware to be updated
to Version 1.10 or later. Download the firmware for
the K10D from the following URL, and install it on
your camera.
You may also contact your nearest PENTAX
service center for firmware updates. (This will
involve a fee.)
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Firstly, set the wireless mode and channel of the
Next, remove the flash unit from the camera and
1 AF540FGZ, and register them on the camera. 2 place it in the desired position.
ꢀTurn the camera off and then attach the
AF540FGZ to the hot shoe of the camera.
ꢁSet the power switch of the flash unit to
(WIRELESS).
ꢂPress the wireless mode button (M/C/S) the
number of times required to display SLAVE on
the LCD panel.
● Press the flash mode button (MODE) to display
(P-TTL) if the flash mode was set to the modes
other than P-TTL auto.
Enable the built-in flash unit of the camera and
3 set the camera flash mode to
(WIRELESS).
Confirm that the AF540FGZ and built-in flash unit
4 are fully charged, and take the photograph.
● You cannot set the flash unit to SLAVE while the
exposure metering timer is on (while information
relating to aperture etc. is displayed in the
viewfinder).
A lamp on the AF540FGZ will blink.
● In the P-TTL mode, flash output setting (1/1, 2/3,
1/2, and 1/3) and flash output compensation (-3.0
● The flash mode on the camera must be set to
(WIRELESS), otherwise the AF540FGZ will not
discharge.
ꢃSlide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
ꢄPress the channel button (CH) and select a
channel from 1CH to 4CH.
ꢅSlide the setting switch back up to the (white
dot).
ꢆWhen you turn the camera on and press the
shutter release button halfway down, the
channel is registered on the camera.
● By changing the camera's function settings, you
can set the built-in flash unit so that it is not the
main flash. Refer to the operating manual for the
camera to find out how.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
When Attaching the AF540FGZ to the Camera for Control Flash
Main flash
Control flash only: not
used for main flash
ꢁSet the power switch of the flash unit to
(WIRELESS).
ꢂPress the wireless mode button (M/C/S) the
number of times required to display CONTROL
on the LCD panel.
ꢃSlide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
ꢄPress the channel button (CH) and select a
channel from 1CH to 4CH.
(Preparation of Flash Unit Attached to Camera)
Firstly, set the wireless mode and channel of the
1 flash unit attached to the camera, and register
them on the camera.
ꢀAttach the AF540FGZ to the hot shoe of the
camera after turning the camera off.
ꢅSlide the setting switch back up to the (white
dot).
Download from Www.Somanuals.com. All Manuals Search And Download.
42
ꢆ When you turn the camera on and press the
shutter release button halfway down, the
channel of the flash unit is registered on the
camera.
Next, set the channel of the separated (wireless)
2 flash unit to the same channel as the flash unit
attached to the camera.
ꢀPlace the other AF540FGZ in the desired
position.
(Preparation of Separated Flash Unit)
ꢁSet the power switch of the flash unit to
(WIRELESS).
ꢂPress the wireless mode button (M/C/S) the
number of times required to display SLAVE on
the LCD panel.
ꢃSlide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
ꢄPress the channel button (CH) and select the
same channel that the flash unit attached to
the camera has been set to.
ꢅSlide the setting switch back up to the (white
dot).
● The two flash units must be set to the same
channel, otherwise the separated flash unit will
not discharge.
(Photographing)
Confirm that both flash units are fully charged,
3 and take the photograph.
A lamp on the wireless flash unit will blink.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
When Using Both an AF540FGZ Attached to the Camera and a Separated Flash Unit as
Main Flashes
Use both flash units as main flashes
ꢁSet the power switch of the flash unit to
(WIRELESS).
ꢂPress the wireless mode button (M/C/S) the
(Preparation of Flash Unit Attached to Camera)
Firstly, set the wireless mode and channel of the
number of times required to display MASTER
on the LCD panel.
ꢃSlide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
ꢄPress the channel button (CH) and select a
channel from 1CH to 4CH.
1 flash unit attached to the camera, and register
them on the camera.
ꢀAttach the AF540FGZ to the hot shoe of the
camera after turning the camera off.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
ꢅSlide the setting switch back up to the (white
dot).
ꢆ When you turn the camera on and press the
shutter release button halfway down, the
channel of the flash unit is registered on the
camera.
Next, set the channel of the separated (wireless)
2 flash unit to the same channel as the flash unit
attached to the camera.
ꢀPlace the other AF540FGZ in the desired
position.
ꢁSet the power switch of the flash unit to
(WIRELESS).
ꢂPress the wireless mode button (M/C/S) the
number of times required to display SLAVE on
the LCD panel.
(Preparation of Separated Flash Unit)
ꢃSlide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
ꢄPress the channel button (CH) and select the
same channel that the flash unit attached to
the camera has been set to.
ꢅSlide the setting switch back up to the (white
dot).
● The two flash units must be set to the same
channel, otherwise the separated flash unit will
not discharge.
(Photographing)
Confirm that both flash units are fully charged,
3 and take the photograph.
A lamp on the wireless flash unit will blink.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Wireless High-Speed Sync Photography
(Using the AF540FGZ in Combination with a
Built-in Flash Unit)
Firstly, set the wireless mode and channel of the
1 AF540FGZ, and register them on the camera.
● You cannot set the flash unit to SLAVE while the
exposure metering timer is on (while information
relating to aperture etc. is displayed in the
viewfinder).
ꢀTurn the camera off and then attach the
AF540FGZ to the hot shoe of the camera.
ꢁSet the power switch of the flash unit to
(WIRELESS).
ꢃSlide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
ꢄPress the channel button (CH) and select a
channel from 1CH to 4CH.
ꢂPress the wireless mode button (M/C/S) the
number of times required to display SLAVE on
the LCD panel.
ꢅSlide the setting switch back up to the (white
dot).
Download from Www.Somanuals.com. All Manuals Search And Download.
46
ꢆWhen you turn the camera on and press the
shutter release button halfway down, the
channel is registered on the camera.
● If the shutter speed is the same or slower than
the X-sync speed of the camera, the flash will be
set to P-TTL mode, and when it is faster than X-
sync speed, the flash will be set to high-speed
sync mode.
Next, remove the flash unit from the camera and
2 place it in the desired position.
● Press the flash mode button (MODE) to display
(P-TTL) if the flash mode was set to the modes
other than P-TTL.
Confirm that the AF540FGZ and built-in flash unit
7 are fully charged, and take the photograph.
A lamp on the wireless flash unit will blink.
● The built-in flash unit is used for control flash
only. It will not be used for main flash.
● Refer to camera's operating manual for the
operation of the camera.
Set the zoom position. (Refer to page 21)
3
● Set the zoom position with (M.Zoom) regardless
of the lens you use.
Enable the built-in flash unit of the camera and
4 display (
) on the LCD panel.
Set the sync mode switch of the wireless flash
5 unit to leading curtain sync (
).
Set the exposure mode of the camera to manual
6 exposure and the shutter speed faster than X-
sync speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
ꢂPress the wireless mode button (M/C/S) the
number of times required to select CONTROL
or MASTER.
(Using the AF540FGZ in Combination with
another AF540FGZ)
Firstly, set the wireless mode and channel of the
CONTROL: For using the flash unit attached
to the camera as the control flash.
1 AF540FGZ attached to the camera, and register
the channel on the camera.
MASTER: For using both flash units as main
flashes.
ꢀTurn the camera off and then attach the
AF540FGZ to the hot shoe of the camera.
ꢁSet the power switch of the flash unit to
(WIRELESS).
ꢃSlide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
ꢄPress the channel button (CH) and select a
channel from 1CH to 4CH.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
ꢅSlide the setting switch back up to the (white
dot).
ꢆWhen you turn the camera on and press the
shutter release button halfway down, the
channel is registered on the camera.
Set the sync mode switch of the wireless flash
3 unit to leading curtain sync (
).
Set the exposure mode of the camera to manual
4 exposure and the shutter speed faster than X-
sync speed.
Next, set the channel of the separated (wireless)
● If the shutter speed is the same or slower than
the X-sync speed of the camera, the flash will be
set to P-TTL mode, and when it is faster than X-
sync speed, the flash will be set to high-speed
sync mode.
2 flash unit to the same channel as the flash unit
attached to the camera.
ꢀPlace the other AF540FGZ in the desired
position.
ꢁSet the power switch of the flash unit to
(WIRELESS).
ꢂPress the wireless mode button (M/C/S) the
number of times required to display SLAVE on
the LCD panel.
Confirm that both flash units are fully charged,
5 and take the photograph.
A lamp on the wireless flash unit will blink.
ꢃSlide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
ꢄPress the channel button (CH) and select the
same channel that the flash unit attached to
the camera has been set to.
ꢅSlide the setting switch back up to the (white
dot).
● The two flash units must be set to the same
channel, otherwise the separated flash unit will
not discharge.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
■Slave
With the AF540FGZ, you can take photographs with
the flash unit separated from the camera wirelessly in
auto or manual mode.
Combine the flash unit with the built-in flash unit of the
camera or another flash unit attached to the camera.
Before photographing, confirm the following.
1. Whether you can use this function with the
combination of your camera and the flash mode
you have set.
➝ Functions Related to Each Flash Mode
2. Precaution When Photographing with a Slave
wireless mode.
Procedure
Confirm that the slave mode is set to SL2. (Refer
Set the flash unit’s power switch to (WIRELESS).
2
Press the wireless mode button (M/C/S) the
3 number of times required to display SLAVE on
the LCD panel.
Press the flash mode button (MODE) to set the
4 flash mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Set the zoom position to suit the subject and
● Do not use red-eye reduction with the camera’s
flash. This will result in the AF540FGZ firing by
the pre-flash. For the same reason, set the
camera to manual focus when firing the flash
continuously so that the AF spotbeam does not
operate with cameras that have AF spotbeam
functions.
5 place the flash unit at the desired location.
● When setting up a flash unit separately from the
camera, use the off-camera shoe adapter F when
using a tripod, or the off-camera shoe clip CL-10
when setting up in another location such as
tabletop, chair, etc.
Turn the flash unit on the camera on.
6
● If the camera's built-in flash unit is part of the
combination, pop up the built-in flash unit.
Check that the ready lamp is lit, then take the
7 picture.
● When charging is complete, ( ) is lit in the
viewfinder of the camera.
● Position the slave unit(s) so that the slave
sensor can receive the flash discharged by the
camera’s built-in flash unit or attached flash unit.
● The AF540FGZ will discharge at the same time
that the camera’s flash discharges.
● Keep the distance from the built-in flash unit and
AF540FGZ to the subject within 4 meters.
● The slave unit will turn off automatically after
about 1 hour of non-operation when the auto
power off function is set.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Procedure
■Slave Mode Setting
To properly control the slave flash, it is necessary to set
the slave mode settings.
Slide the setting switch up.
1
Press the LCD panel illumination button (LIGHT)
2 for 2 seconds or more. SL1 will be displayed.
Press the select button (S) to select SL 1 or
3 SL 2.
SL 1: When photographing in wireless mode
SL 2: When photographing with slave flash
2 seconds
or more
● The flash will not discharge properly if the slave
mode was set to the wrong mode. It may not
discharge at all or may discharge simultaneously
with the control flash.
Press the LCD panel illumination button (LIGHT)
4 to finish setting.
●
In SL 2, fluorescent lamps flicker may contribute to
flash unit’s erroneous firing on rare occasions.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
■Slow-Speed Sync Photography
When using a normal flash to photograph a subject in a
night or evening setting, the background will appear
very dark because a normal flash light cannot
sufficiently light it. However, it is possible to balance
both subject and background by using the flash to
properly expose the foreground subject and a slow
shutter speed to expose the low light background.
Before photographing, confirm the following.
1. Whether your camera support this function
➝Cameras that Support Slow-Speed Sync Mode
2. Whether you can use this function with the
combination of your camera and the flash mode
you have set.
➝Functions Related to Each Flash Mode
● Refer to the camera operation manual for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
The bounce angle can be set to the following angles.
Rightward: 0°, 30°, 60°, 90°, 120°, 150°, 180°
■Bounce Flash
With the AF540FGZ, you can tilt and swivel the flash
head to aim at the ceiling or wall to bounce the flash
before it reaches the subject. Doing so creates softer
light and shadows to make the picture look more
natural. Bouncing the flash will decrease the flash
intensity by the time it reaches the subject. Therefore,
this function is effective when photographing in P-TTL
or TTL mode at short distances.
Leftward:
Upward:
0°, 30°, 60°, 90°, 135°
0°, 30°, 45°, 60°, 75°, 90°
Downward: 0°, -10°
Download from Www.Somanuals.com. All Manuals Search And Download.
54
● A click stop is provided for each bounce angle.
● Hold the bounce lock release button and tilt the
flash head downward when you set the bounce
Manual Flash Photography
The amount of light during bounce flash photography is
greatly affected by the condition of the reflective
surface, therefore test pictures should be taken
beforehand or changing the exposure and taking
several pictures may be recommended.
angle at -10
°.
● When using bounce flash, (
) will be displayed
on the LCD panel.
● The effective flash range will blink only when the
bounce angle is set at -10
● It is recommended to set the bounce angle at
-10 to prevent uneven exposure when the
● When taking color photographs, if the reflective
surface for the bounce flash is colored, the
picture will be affected by the color and unless
this is intentional, a white surface should be
used.
°
.
°
distance to the subject is within 1m.
● Bounce flash photography is greatly affected by
the surrounding conditions. A photography
manual and other references are recommended.
P-TTL, TTL Auto Flash Photography
The amount of reflective light will change according to
the condition of the reflective surface, angle, and
distance. However, with TTL auto flash units bounce
flash photography can be relatively easily done.
Confirm the flash status indicator in the viewfinder or
the auto check display in the LCD panel when taking
pictures.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
● To change the composition, raise your finger off
the shutter release button and press it halfway
down again to recompose the picture.
● When using the AF540FGZ’s built-in AF
spotbeam, the AF spotbeam built into the camera
will not operate.
● The AF spotbeam on the flash unit works
accurately only when mounted onto the camera’s
hot shoe.
■AF Spotbeam
The AF540FGZ features a built-in red spotbeam
projector to assist the autofocus system in dim light and
low-contrast conditions. When using the flash with
autofocus camera in dark conditions, the spotbeam will
be projected automatically depending on the ambient
lighting conditions. This function is activated only when
the camera is set to autofocus. By setting the flash
mode to (SB), the AF540FGZ can be used exclusively
as a focusing aid in dim light.
● The flash does not discharge when using the
AF540FGZ spotbeam exclusively as a focusing
aid.
Using the AF540FGZ Spotbeam
Exclusively as a Focusing Aid
1.Set the power switch to the (ON) position.
2.Press the flash mode button (MODE) to select (SB).
3.Set the camera to the autofocus mode.
4.Press the shutter release button halfway down to let
the AF spotbeam discharge.
● The AF spotbeam does not work in bright light
conditions.
● If the In-focus indicator does not light up in
several seconds, it means that the subject is
hard to autofocus. In this case, use the manual
focus mode to focus on the subject.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
2.Catchlight panel
■Wide-Angle Panel and Catchlight
A catchlight is a reflection of light source in the eyes.
It usually appears as a white dot and makes the human
subject look more lively. Set the bounce flash angle to
90° and get close to the subject before taking the
picture.
Panel
The AF540FGZ has a built-in wide-angle panel and
catchlight panel at the top of the flash head.
Execute the following if necessary.
Pull out both the wide-angle panel and catchlight
1 panel.
Catchlight panel
Wide-angle panel
Store the panel you are not using.
2 .
● When storing the wide-angle panel, push it
inward while holding the catchlight panel so that
it does not catch on the catchlight panel.
● When storing the catchlight panel, do so by
pushing it inward.
1.Wide-angle panel
The wide-angle panel expands flash coverage angle for
the following lenses. The flash zoom position will be
fixed at the same position as the focal length of the
lens.
13 mm for digital camera (K series, *ist D series),
25mm for digital camera (645D), 20 mm for 35 mm
camera, 35mm for 645 camera, 55mm for 67 camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Cameras Capable of Modeling Flash or
Test Flash Photography Using the Camera
Button
■Modeling Flash/Test Flash
Before taking the picture, firing a modeling flash helps
you to see how shadows are cast on the subject.
With the following cameras, a button on the camera
can be used instead of the modeling button
(MODELING) or the test button (TEST). This operation
can be carried out with either an attached flash unit or a
wireless flash unit. For information on how to arrange
this, refer to the operating manual for the camera.
Modeling Flash
Slide the setting switch down (yellow dot).
1
Check that the flash is ready, then press the
2 modeling button (MODELING). The flash will
discharge continuously for one second.
*ist D: You can use the OK button. (Refer to "Custom
Function Chart" in the camera's operating
manual.)
After firing the modeling flash, slide the setting
3 switch up (white dot).
*ist:
You can use the flash pop-up button. (Refer to
"Setting the Custom Function" in the camera's
operating manual.)
● To prevent the flash tube from overheating or
deteriorating, do not discharge the modeling
flash more than 10 consecutive times. After the
tenth time, let the flash unit rest for at least 10
minutes.
MZ-S: You can use the LCD illuminator button. (Refer
to "PENTAX Functions" in the camera's
operating manual.)
Test Flash
Check that the flash is ready, then press the test button
(TEST). The test flash will discharge.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
● When setting up the flash unit separately from
the camera, use the off-camera shoe adapter F
when using a tripod, or the optional off-camera
shoe clip CL-10 when setting up in another
location such as tabletop, chair, etc.
■Connecting the AF540FGZ with the
Extension Cord
When using the AF540FGZ separately from the
camera connected by an extension cord, use the
optional extension cord F5P/F5P L. Attach the
extension cord F5P/F5P L to the camera using the
● The off-camera shoe adapter F cannot be
attached to the bundled stand.
optional hot shoe adapter F or the optional hot shoe
G
adapter F (refer to the diagram on the right).
● When using the AF540FGZ in combination with
the built-in flash unit of the following cameras,
Hot shoe
adapter FG
Extension cord
F5P/F5P L
use the hot shoe adapter F . If you use the hot
G
shoe adapter F, the built-in flash unit will not pop
up.
K-x, K-7, K-m/K2000, K20D, K200D, K100D Super,
K10D, K110D, K100D, *ist DL2, *ist DS2, *ist DL,
*ist DS, *ist D, *ist, MZ-L/ZX-L/MZ-6, MZ-S, MZ-60/
ZX-60, MZ-5 /ZX-5 , MZ-30/ZX-30, MZ-7/ZX-7, MZ-
N
N
3,
MZ-5/ZX-5, MZ-10/ZX-10, MZ-50/ZX-50
You can use the hot shoe adapter F with any
cameras other than those above.
● The 672 does not come with a hot shoe. The
optional hot shoe grip 672 should be used.
Refer to the hot shoe grip 672 operating manual
for instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Supported Functions for PENTAX Cameras
■Cameras that Support Each Flash Mode
Cameras that support each of the flash modes are listed below.
Please note that functions related to each flash mode differ. Refer to "Functions Related to Each Flash Mode" (page
Flash Mode
Camera
Notes
P-TTL Auto
Flash (P-TTL)
645D, K-x, K-7,
- When the exposure mode is Programmed AE, Shutter Priority AE, or
Aperture Priority AE, even if you set the flash mode to manual (M), it
will automatically switch to (P-TTL) while the camera's exposure meter
is operating (while information is being displayed in the viewfinder). You
can actually use Manual flash mode (M) when the camera exposure
mode is set to Manual (M).
(With the 645D, K-x, K-7, K-m/K2000, K20D, K200D, K100D Super,
K10D, K110D, K100D, *ist DS2, *ist DS, and *ist D, if the aperture of
the lens is in a position other than A, the flash mode will switch to TTL.)
- In trailing curtain sync or contrast control sync mode, the flash mode
will automatically be switched to (P-TTL) when you press the shutter
release button halfway down, even if you have set it to manual (M).
- If the camera exposure metering timer is on, you cannot select (A) or
(M) by pressing the flash mode button (MODE).
K-m/K2000, K20D,
K200D, K100D Super,
K10D, K110D, K100D,
*ist DL2, *ist DS2,
*ist DL, *ist DS, *ist D,
*ist, MZ-L/ZX-L/MZ-6,
MZ-S
- Although (P-TTL) is displayed in the following cameras, the actual
photograph is taken with (TTL).
LX, Super A/Super Program, 645
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Flash Mode
Camera
Notes
TTL Auto Flash 672
(TTL)
- In trailing curtain sync or contrast control sync mode, the flash mode
will automatically be switched to (TTL) when you press the shutter
release button halfway down, even if you have set it to manual (M).
645N2, 645N,
Z/PZ series, MZ/ZX
series (except MZ-M/
- When the exposure mode is Programmed AE, Shutter Priority AE, or
Aperture Priority AE, the flash mode will automatically be switched to
(TTL), even if you have set it to manual (M).
ZX-M), SFX /SF1 ,
SFX/SF1
- In trailing curtain sync or contrast control sync mode, the flash mode
will automatically be switched to (TTL) when you press the shutter
release button halfway down, even if you have set it to manual (M).
- If the camera exposure metering timer is on (information is displayed in
the viewfinder), you cannot select (A) or (M) by pressing the flash mode
button (MODE).
N
N
- You cannot use (TTL) with the SF7/SF10.
645, Super A/
Super Program, LX
-
Auto Flash (A)
Aperture setting
capable PENTAX
single lens reflex
cameras
- Under the following conditions, autofocus cameras can also use (A).
- The camera exposure mode is set to manual exposure.
- The camera exposure metering timer is off.
-
With the following combinations of cameras and exposure modes, you
cannot photograph correctly if the aperture is set to a value brighter than F2.
Camera: Z-5P, Z-5, Z-1P/PZ-1P, Z-1/PZ-1, SFXN/SF1N, SF7/SF10, SFX/SF1
Exposure mode: Programmed AE and Shutter Priority AE modes
Manual Flash
(M)
Aperture setting
capable PENTAX
single lens reflex
cameras
-
Download from Www.Somanuals.com. All Manuals Search And Download.
61
■Cameras that Support Each Sync Mode
Cameras that support each of the sync modes are listed below.
Please note that the conditions under which they can be used differ depending on camera type and settings. For
details, refer to the restrictions reference pages.
Restrictions
Reference Page
Sync Mode
Camera
Leading curtain sync (
Trailing curtain sync (
)
All PENTAX single lens reflex cameras provided with a hot shoe
)
Digital single lens reflex
cameras
645D, K-x, K-7, K-m/K2000,
K20D, K200D, K100D Super,
K10D, K110D, K100D, *ist DL2,
*ist DS2, *ist DL, *ist DS, *ist D
Film cameras (medium format) 672, 645N2, 645N
Film cameras (35mm autofocus *ist, Z/PZ series, MZ/ZX series
single lens reflex cameras)
(except MZ-M/ZX-M), SFXN/
SF1N, SFX/SF1, SF7/SF10
Contrast control sync
Digital single lens reflex
cameras
645D, K-x, K-7, K-m/K2000,
K20D, K200D, K100D Super,
K10D, K110D, K100D, *ist DL2,
*ist DS2, *ist DL, *ist DS, *ist D
(
)
Film cameras (medium format) 672, 645N2, 645N
Film cameras (35mm autofocus *ist, Z/PZ series, MZ/ZX series
single lens reflex cameras)
(except MZ-M/ZX-M), SFXN/
SF1N, SFX/SF1, SF7/SF10
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Restrictions
Reference Page
Sync Mode
Camera
645D, K-x, K-7, K-m/K2000,
High-speed sync (
)
Digital single lens reflex
cameras
K20D, K200D, K100D Super,
K10D, K110D, K100D, *ist DL2,
*ist DS2, *ist DL, *ist DS, *ist D
Film cameras (35mm autofocus *ist, MZ-S, MZ-L/ZX-L/MZ-6
single lens reflex cameras)
■Cameras that Support Wireless Mode
Function
Camera
Notes
Wireless Mode Digital single lens reflex
645D, K-x, K-7,
K-m/K2000, K20D,
K200D, *ist DL2,
*ist DS2, *ist DL,
*ist DS, *ist D,
- When photographing in wireless mode, set
- You cannot photograph in wireless mode in
combination with the built-in flash unit with
the following cameras.
(
)
cameras
K10D (NOTE)
K100D Super, K110D, K100D, *ist DL2, *ist
DS2, *ist DS, *ist DL
Film cameras (35mm
*ist, MZ-S, MZ-L/
autofocus single lens reflex ZX-L/MZ-6
cameras)
You can use the slave flash instead, if your camera does not support wireless mode. In this case, the available flash
Download from Www.Somanuals.com. All Manuals Search And Download.
63
■Cameras that Support Slow-Speed Sync Mode
Function
Camera
Notes
Slow-speed Digital single lens reflex 645D, K-x, K-7, K-m/K2000, K20D,
Slow-speed sync is not possible
sync
cameras
K200D, K100D Super, K10D, K110D, in the following cameras except
K100D, *ist DL2, *ist DS2, *ist DL,
*ist DS, *ist D
with B (Bulb Exposure).
- Cameras that are not capable of
setting the shutter speed slower
than the flash X-sync speed.
- Cameras in which the shutter
speed is automatically switched
to the X-sync speed when the
flash unit has finished charging.
- Cameras whose shutter speed
can be switched manually only
with B (Bulb Exposure).
Film cameras (35mm
autofocus single lens
reflex cameras)
*ist, MZ/ZX series, Z/PZ series,
SFX /SF1 , SFX/SF1, SF7/SF10
N
N
Film cameras (medium 672, 645N2, 645N, 645
format)
Film cameras (35mm
manual focus single
lens reflex cameras)
Cameras that meet the following
conditions:
- Capable of setting the shutter
speed slower than the flash X-sync
speed.
- The shutter speed is not
automatically switched even if the
flash unit has finished charging.
■Functions Related to Each Flash Mode
Supported flash modes and sync modes differ for each camera model.
Refer to the following table.
(N: usable, O: usable under certain conditions, X: unusable, -: Flash mode not supported)
* Where the flash mode is set to SB (AF spotbeam), the flash unit will not discharge (refer to page 56).
Download from Www.Somanuals.com. All Manuals Search And Download.
64
1. Cameras that Support P-TTL Auto Flash Mode
Type A (Digital single lens reflex cameras):
645D, K-x, K-7, K-m/K2000, K20D, K200D, K100D Super,
K10D, K110D, K100D, *ist DL2, *ist DS2, *ist DL, *ist DS, *ist D
Type B (Film cameras (35mm autofocus single lens reflex)): *ist, MZ-L/ZX-L/MZ-6, MZ-S
(P-TTL) P-TTL auto (TTL) TTL auto (A) auto flash (M) manual flash (SB) AF
Flash Mode
flash photography flash photograph
y
photography
photography
spotbeam
1
Camera type
Leading curtain sync
Trailing curtain sync
Slow-speed sync
High-speed sync
(A)
N
N
N
N
(B)
N
N
N
N
(A)
N
N
N
N
(B)
N
N
N
N
(A), (B)
(A), (B)
(A)* , (B)
N
X
N
X
-
-
-
-
N
X
N
X
Automatic switching to
X-sync speed when
flash is charged
N
N
N
N
N
N
N
N
N
N
N
N
-
Flash ready display in
viewfinder
-
Auto check display
Slave flash
X
N
N
N
N
N
X
N
N
N
N
N
X
N
X
X
-
-
X
X
N
X
2
Wireless control
Red-eye reduction
N
N
N
-
N*
N
N
N
X
N
N
-
AF spotbeam
N
1
* : Depending on the type of camera, if Exposure Metering is switched on, the flash mode switches to [P-TTL] or
2
* : *ist D, K10D (the firmware must be updated to Version 1.10 or later)
Download from Www.Somanuals.com. All Manuals Search And Download.
65
2. Cameras that Support TTL Auto Flash Mode
<Film cameras (35mm autofocus single lens reflex cameras)>
Type A: MZ-60/ZX-60, MZ-5 /ZX-5 , MZ-30/ZX-30, MZ-7/ZX-7, Z-1/PZ-1, Z-5, Z-1P/PZ-1P, Z-5P, Z-20/PZ-20,
N
N
Z-20P, Z-50P, Z-70P, SFX/SF1, SFX /SF1
N
N
Type B: MZ-3, MZ-5/ZX-5, MZ-10/ZX-10, MZ-50/ZX-50
Type C: Z-10/PZ-10
(P-TTL) P-TTL auto (TTL) TTL auto
Flash Mode
(A) auto flash (M) manual flash (SB) AF
photography photography spotbeam
flash photography flash photograph
y
Camera type
Leading curtain sync
Trailing curtain sync
Slow-speed sync
High-speed sync
(A), (B), (C)
(A)
N
N
N
X
(B)
N
N
N
X
(C)
N
N
N
X
(A) (B) (C) (A) (B) (C) (A), (B), (C)
-
-
-
-
N
X
N
X
N
X
N
X
N
X
N
X
-
-
-
-
N
X
N
X
N
X
N
X
N
X
N
X
Automatic switching
to X-sync speed when
flash is charged
-
N
N
N
N
N
N
N
N
N
-
Flash ready display in
viewfinder
-
N
N
N
N
N
N
N
N
N
-
Auto check display
Slave flash
-
-
-
-
-
N
X
N
X
N
X
X
N
X
X
N
X
X
N
X
X
N
X
X
X
N
X
-
-
N
X
Wireless control
Red-eye reduction
AF spotbeam
X
X
X
-
1
2
1
2
1
2
N*
O*
N
X
N*
O*
X
X
N*
O*
N
X
-
N
N
X
X
N
N
N
1
* : Only when combined with cameras provided with red-eye reduction. (Excluding the MZ-5N, Z-1P, and Z-5P.)
2
* : Only when the AF540FGZ is detached from the camera and connected by an extension cord. (Excluding the MZ-3, MZ-5, MZ-10, and MZ-50.)
Download from Www.Somanuals.com. All Manuals Search And Download.
66
<Film cameras (medium format)>
Type D: 672
Type E: 645 N2, 645 N
Type F: 645
(P-TTL) P-TTL auto
flash photography flash photography photography
(TTL) TTL auto
(A) auto flash (M) manual flash
photography
(SB) AF
spotbeam
Flash Mode
Camera type
Leading curtain sync
Trailing curtain sync
Slow-speed sync
High-speed sync
(D), (E), (F)
(D)
N
N
N
X
(E)
N
N
N
X
(F) (D) (E) (F) (D) (E) (F) (D) (E) (F)
-
-
-
-
N
X
N
X
N
X
N
X
N
X
N
X
N
X
-
-
-
-
-
-
-
-
-
-
-
-
X
N
X
N
X
X
N
X
N
X
X
X
X
X
Automatic switching
to X-sync speed
when flash is
charged
-
N
N
N
N
N
N
N
N
N
-
-
-
Flash ready display
in viewfinder
-
N
N
N
N
N
N
N
N
N
-
-
-
Auto check display
Slave flash
-
-
-
-
-
N
X
X
X
-
N
X
N
X
X
X
-
X
N
X
X
N
X
N
X
X
X
-
X
N
X
X
N
X
N
X
X
X
-
-
-
-
-
-
-
-
-
-
-
-
-
Wireless control
Red-eye reduction
AF spotbeam
X
-
X
N
X
X
X
X
N
-
N
-
X
-
Download from Www.Somanuals.com. All Manuals Search And Download.
67
<Film cameras (35mm manual focus single lens reflex cameras)>
Type G: LX
Type H: Super A/Super Program
(P-TTL) P-TTL auto (TTL) TTL auto (A) auto flash (M) manual flash (SB) AF
Flash Mode
flash photography flash photograph
y
photography
photography
spotbeam
Camera type
Leading curtain sync
Trailing curtain sync
Slow-speed sync
High-speed sync
(G), (H)
(G)
N
X
(H)
N
X
(G)
N
X
(H)
N
X
(G)
N
X
(H)
N
X
(G), (H)
-
-
-
-
-
-
-
-
X
X
X
N
X
X
N
X
X
X
X
X
Automatic switching to
X-sync speed when
flash is charged
-
N
N
N
N
N
N
-
Flash ready display in
viewfinder
-
N
N
N
N
N
N
-
Auto check display
Slave flash
-
-
-
-
-
N
X
X
X
-
N
X
X
X
-
N
X
X
X
-
N
X
X
X
-
N
X
X
X
-
X
X
X
X
-
-
-
-
-
-
Wireless control
Red-eye reduction
AF spotbeam
Download from Www.Somanuals.com. All Manuals Search And Download.
68
3. Cameras that Does not Support P-TTL and TTL Auto Flash Mode
<Film cameras (35mm autofocus single lens reflex cameras)>
Type A: SF7/SF10
(P-TTL) P-TTL auto (TTL) TTL auto (A) auto flash (M) manual flash (SB) AF
Flash Mode
flash photography flash photograph
y
photography
photography
spotbeam
Camera type
Leading curtain sync
Trailing curtain sync
Slow-speed sync
High-speed sync
(A)
(A)
(A)
N
X
(A)
N
X
(A)
-
-
-
-
-
-
-
-
-
-
-
-
N
X
N
X
Automatic switching to
X-sync speed when
flash is charged
-
-
N
N
-
Flash ready display in
viewfinder
-
-
N
N
-
Auto check display
Slave flash
-
-
-
-
-
-
-
-
-
-
X
N
X
X
-
-
N
X
Wireless control
Red-eye reduction
AF spotbeam
-
N
X
N
N
-
N
Download from Www.Somanuals.com. All Manuals Search And Download.
69
<Film cameras (35mm manual focus single lens reflex camera, 67 camera)>
Type B: MZ-M/ZX-M
Type C: P30T, P30N/P3N, P30, P50/P5, A3Date, A3DateS, Program A/Program Plus
Type D: ME, ME-Super, MG, ME-F/MEF, MV1/MV
(P-TTL) P-TTL auto
flash photography flash photograph
(TTL) TTL auto
(A) auto flash (M) manual flash
photography photography
(SB) AF
spotbeam
Flash Mode
y
Camera type
Leading curtain sync
Trailing curtain sync
Slow-speed sync
High-speed sync
(B), (C), (D)
(B), (C), (D)
(B) (C) (D) (B) (C) (D) (B), (C), (D)
-
-
-
-
-
-
-
-
N
X
N
N
X
N
X
N
N
X
-
-
-
-
X
X
1
1
N
X
N*
X
N
X
N*
X
X
X
X
X
Automatic switching to
X-sync speed when
flash is charged
2
2
-
-
N
N
N*
N
N
N*
-
Flash ready display in
viewfinder
2
2
-
-
N
N
N*
N
N
N*
-
Auto check display
Slave flash
-
-
-
-
-
-
-
-
-
-
N
X
X
X
-
N
X
X
X
-
X
X
X
X
-
N
X
X
X
-
X
X
X
X
-
X
X
X
X
-
-
-
-
-
-
Wireless control
Red-eye reduction
AF spotbeam
1
* : Slow-speed sync with B (Bulb Exposure) for the A3Date and A3DateS.
2
* : Except ME.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Type E: 35mm single reflex cameras other than those in Type A to D, 67 camera
(P-TTL) P-TTL auto (TTL) TTL auto (A) auto flash (M) manual flash (SB) AF
Flash Mode
flash photography flash photograph
y
photography
photography
spotbeam
Camera type
Leading curtain sync
Trailing curtain sync
Slow-speed sync
High-speed sync
(E)
(E)
(E)
N
X
(E)
N
X
(E)
-
-
-
-
-
-
-
-
-
-
-
-
X
X
X
X
Automatic switching to
X-sync speed when
flash is charged
-
-
X
X
-
Flash ready display in
viewfinder
-
-
X
X
-
Auto check display
Slave flash
-
-
-
-
-
-
-
-
-
-
X
X
X
X
-
X
X
X
X
-
-
-
-
-
-
Wireless control
Red-eye reduction
AF spotbeam
Download from Www.Somanuals.com. All Manuals Search And Download.
71
■Sync Mode Restrictions
Leading Curtain Sync Photography (
)
This sync mode can be used with all PENTAX single lens reflex cameras provided with a hot shoe. However, there
are restrictions depending on camera type and settings.
Camera Model
Camera Settings
Restrictions
Z-1/PZ-1, Z-5, Z-1P/PZ-1P, Exposure mode: Programmed AE
The minimum shutter speed varies
depending on the focal length of the lens
you are using.
Z-5P
(Hyper Program), Hyper Program
Aperture Priority AE, Aperture Priority
AE, Hyper Manual by pressing IF button
Exposure mode: Hyper Program Shutter The minimum shutter speed changes
Priority AE
depending on the ambient brightness.
SFX /SF1
Exposure mode: Programmed AE,
Shutter Priority AE
The shutter speed changes to within
1/60 to 1/125 sec.
N
N
Exposure mode: Aperture Priority AE
The shutter speed is fixed at 1/125 sec.
Trailing Curtain Sync Photography (
)
Cameras that support this sync mode are as follows.
The shutter speeds that can be used differ according to the type of camera.
Camera
Category
Camera Model
Shutter Speed
Digital single lens K-x, K-7, K-m/K2000, K20D, K200D, K100D Super,
1/90 sec. or slower
reflex cameras
K10D, K110D, K100D, *ist DL2, *ist DS2, *ist DL, *ist DS
645D, *ist D
1/60 sec. or slower
Film cameras
(medium format)
672
1/15 sec.fixed (in Aperture Priority AE)
1/15 sec. or slower (in manual exposure)
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Camera
Category
Camera Model
Shutter Speed
Film cameras
645N2, 645N
1/45 sec. fixed (in Programmed AE and Aperture Priority AE)
(medium format)
1/45 sec. or slower (in Shutter Priority AE and
manual exposure)
Film cameras
MZ-S
1/90 sec. or slower
(35mmautofocus
single lens reflex)
Z-1/PZ-1, Z-5, Z-1P/PZ-1P, Z-5P
1/125 sec. or slower (in Programmed AE and
Aperture Priority AE in Hyper Progam)*
1
1/125 sec. or slower (in Shutter Priority AE in
2
Hyper Program)*
Z-10/PZ-10
1/60 sec. fixed (in Programmed AE)
1/60 sec. or slower (in manual exposure)
SFX /SF1 , SFX/SF1, SF7/SF10
1/60 sec. fixed (in Programmed AE, Shutter
Priority AE and Aperture Priority AE)
N
N
1/60 sec. or slower (in manual exposure)
1/60 sec. or slower
35mm autofocus single lens reflex cameras
other than those above
*1: The minimum shutter speed varies depending on the focal length of the lens you are using.
*2: The minimum shutter speed varies depending on ambient light.
● Under the following condition, the flash mode automatically switches to P-TTL auto flash:
the flash mode is set to manual flash (M), and the sync mode is set to trailing curtain sync (
).
● (
) is displayed on the LCD panel only in the following case:
The shutter release button of the camera is pressed halfway, and the camera exposure metering timer is
on (information is displayed in the viewfinder).
●
The built-in flash units of the following cameras do not have the trailing curtain sync function. When used in
combination with the AF540FGZ, the built-in flash unit does not discharge - only the external flash unit discharges.
SFX/SF1, SFX /SF1 , SF7/SF10, Z-10/PZ-10
N
N
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Contrast Control Sync Photography (
)
Flash units that support this sync mode are as follows.
However, the flash modes, cameras, and camera shutter speeds that can be used differ depending on the flash unit.
Set the shutter speed to the speed shown in the shutter speed column below.
Flash Unit
AF540FGZ,
Flash Mode
P-TTL auto flash
Camera Model
645D, K-x, K-7, K-m/K2000, K20D, K200D,
AF360FGZ,
(Even if you set the flash to another flash K100D Super, K10D, K110D, K100D, *ist DL2,
AF200FGZ, built-in
flash units
mode, the photograph is automatically
taken in P-TTL auto flash mode.)
*ist DS2, *ist DL, *ist DS, *ist D, *ist, MZ-S,
MZ-L/ZX-L/MZ-6
AF330FTZ,
AF500FTZ,
AF400FTZ,
AF240FT
TTL auto flash
672, 645N2, 645N, or any 35mm autofocus
(Even if you set the flash to another flash single lens reflex camera
mode, the photograph is automatically
taken in TTL auto flash mode.)
Camera Category
Camera Model
Shutter Speed
Digital single lens
reflex cameras
K-x, K-7, K-m/K2000, K20D, K200D,
K100D Super, K10D, K110D, K100D,
*ist DL2, *ist DS2, *ist DL, *ist DS
1/180 sec. or slower
*ist D
645D
672
1/150 sec. or slower
1/125 sec. or slower
Film cameras
(medium format)
1/15 sec. fixed (in Aperture Priority AE)
1/15 sec. or slower (in manual exposure)
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Camera Category
Camera Model
645N2, 645N
Shutter Speed
Film cameras
(medium format)
1/45 sec. fixed (in Programmed AE and
Aperture Priority AE)
1/45 sec. or slower (in Shutter Priority AE and
manual exposure)
Film cameras (35mm Z-1/PZ-1, Z-1P/PZ-1P, Z-5, Z-5P
autofocus single lens
1/60 sec. fixed (in Programmed AE and
Aperture Priority AE in Hyper Program)*
1
reflex cameras)
1/60 sec. or slower (in Shutter Priority AE in
Hyper Program)*
2
Z-10/PZ-10
1/60 sec. fixed (in Programmed AE)
1/60 sec. or slower (in manual exposure)
1/60 sec. fixed (in Programmed AE)
1/60 sec. or slower (in manual exposure)
1/60 sec. or slower
SFX /SF1 , SFX/SF1, and SF7/SF10
N
N
All 35mm autofocus single lens reflex
cameras other than above
*1: The minimum shutter speed varies depending on the focal length of the lens you are using.
*2: The minimum shutter speed varies depending on ambient light.
● The flash mode automatically switches to P-TTL auto under the following condition:
When the flash mode is set to manual flash (M), and the sync mode is set to contrast control sync
(
).
● (
) is displayed on the LCD panel only in the following case:
The shutter release button of the camera is pressed halfway, and the camera exposure metering timer is
on (information is displayed in the viewfinder).
Download from Www.Somanuals.com. All Manuals Search And Download.
75
High-Speed Sync Mode Photography (
)
Cameras that support this sync mode are as follows. Be sure to set your camera according to the following settings:
- Shutter speed: faster than flash unit's X-sync speed
- Exposure mode: Tv (Shutter Priority), Av (Aperture Priority), M (manual)
Exposure modes other than the above are not compatible with this sync mode. Refer to the
Exposure Modes Not Supported by High-Speed Sync Mode column.
Exposure Modes Not Supported
Camera Model
Notes
by High-Speed Sync Mode
K-x, K-m/K2000,
K200D, K100D Super, (except *ist and MZ-L/ZX-L/MZ-6), SCN
AUTO PICT, , P
,
,
,
,
,
K110D, K100D,
(K-x, K-m/K2000, K200D, K100D Super,
K110D, K100D, *ist DL2), Sv (K-x,
K-m/K2000, K200D, K100D Super,
K100D), B (Bulb Exposure) modes
*ist DL2, *ist DS2,
*ist DL, *ist DS, *ist,
MZ-L/ZX-L/MZ-6
645D, K-7, K20D,
K10D, *ist D
Green (except 645D), Hyper Program
(when programmed AE is activated), Sv using the following method when the camera is
You can photograph in high-speed sync mode
(except *ist D) and B (Bulb Exposure)
modes
in Hyper Program mode.
- Set the camera using the Av dial or Tv dial so
that the shutter speed is faster than flash
unit's X-sync speed.
MZ-S
P (Programmed AE) mode, B (Bulb
Exposure) mode
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Slow-Speed Sync Photography Restrictions
Be sure to set the camera as follows.
- Shutter speed: slower than flash unit's X-sync speed
- Exposure mode: manual exposure, Shutter Priority AE, (except 645, SFX /SF1 , SFX/SF1 and SF 7/SF10), B
N
N
(Bulb Exposure)
Exposure modes other than the above are not compatible with this photographic method. Refer to
the Exposure Modes Not Supported by Slow-Speed Sync Photography column.
You cannot perform slow-speed sync photography with settings other than B (Bulb Exposure) with the following
cameras:
- Cameras that are not capable of setting the shutter speed slower than the flash X-sync speed
- Cameras in which the shutter speed is automatically switched to the X-sync speed when the flash unit has been
charged.
Exposure Modes Not Supported by
Slow-Speed Sync Photography
Camera Model
Notes
K-x, K-m/K2000, K200D,
K100D Super, K110D,
K100D, *ist DL2, *ist DS2,
*ist DL, *ist DS, *ist,
AUTO PICT,
P (except *ist and MZ-L/ZX-L/MZ-6),
SCN (K-x, K-m/K2000, K200D, K100D Super,
K110D, K100D, *ist DL2), Sv (K-x, K-m/K2000,
,
,
,
,
,
,
MZ-L/ZX-L/MZ-6, MZ-7/ZX-7 K200D, K100D Super, K100D), Av (Aperture
Priority) modes
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Exposure Modes Not Supported by
Slow-Speed Sync Photography
Camera Model
Notes
645D, K-7, K20D, K10D,
*ist D
Green (except 645D), Hyper Program (when
programmed AE is activated), Av (Aperture
Priority) modes and Sv (except *ist D)
You can perform slow-speed sync
photography using the following
method when the camera is in Hyper
Program mode.
- Set the camera using the Av dial or Tv
dial so that the shutter speed is slower
than flash unit's X-sync speed.
MZ-S, MZ-5 /ZX-5 ,
MZ-3, MZ-5/ZX-5,
P (Programmed AE) and Av (Aperture Priority)
modes
N
N
MZ-M/ZX-M, Z-50P,
Program A/Program Plus
MZ-50/ZX-50
MZ-30/ZX-30
PICT and Av (Aperture Priority) modes
, Av (Aperture Priority)
modes
,
,
,
,
,
MZ-10/ZX-10
Auto picture, PICT, and Av (Aperture Priority)
modes
Z-1P/PZ-1P, Z-5P, Z-5,
Z-1/PZ-1
HyP (Hyper Program), Programmed AE mode, You can perform slow-speed sync
Av (Aperture Priority), and HyM (Hyper
Manual) modes by pressing IF button
photography using the following
method when the camera is in HyP
(Hyper Program) mode.
- Set the camera using the Av dial or Tv
dial so that the shutter speed is slower
than flash unit's X-sync speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Exposure Modes Not Supported by
Slow-Speed Sync Photography
Camera Model
Notes
Z-20P, Z-70P, Z-20/PZ-20 Green, Picture, and Av (Aperture Priority)
modes
Z-10/PZ-10
645, SFX /SF1 , SFX/
P (Programmed AE) mode
Programmed AE, Aperture Priority AE and
N
N
SF1, SF7/SF10, Super A/ Shutter Priority AE modes
Super Program
LX
Aperture Priority AE mode
■Precautions When Photographing with a Slave Flash
● Be sure to set the camera as follows:
- Exposure mode: M (manual) or B (Bulb Exposure)
* Exposure modes other than those above are not compatible with this photographic method.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Flash Effective Range
However, if the minimum distance obtained is 0.7m or
less, the minimum distance will be 0.7m. Refer to page
82 for the guide number table.
■Calculating the Flash Effective
Range
When setting the lens to manual f/stop, calculate the
guide number at full flash with the use of flash's zoom
position and ISO. Divide the resulting guide number by
the aperture in use. Thus, the maximum distance is
obtained. The minimum distance is obtained in dividing
this max. distance by approx. 10.
Example:
With a 85 mm lens at f/4 and sensitivity at ISO100
ꢀ For the zoom position 85mm and sensitivity at ISO100, the guide number is 54.
ꢁ 54 (guide number) /4 (aperture) = 13.5m (max. distance)
ꢂ 13.5m (max. distance) /10 = 1.35m (min. distance) Thus, flash effective range is approx. 1.35m - 13.5m.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Effective flash range indicator
Display of Flash Effective Range
The shooting distance parameters will be displayed on
the LCD panel. Make sure that you are within the flash
effective range before taking pictures.
● The effective flash range is displayed for the
following camera and lens combinations.
Camera
Lens Types
645D, K-x, K-7,
K-m/K2000, K20D,
K200D, K100D Super,
K10D, K110D, K100D,
*ist D series
DA, D FA, FA J, FA, F, A
35mm autofocus single
lens reflex cameras
(except for SF series)
D FA, FA J, FA, F, A
FA645
645N2, 645N
If the maximum distance exceeds 22 meters,
) will blink. If the minimum distance is 0.7m
or less, ( ) will blink.
(
● The flash effective range varies depending on
ISO, lens aperture in use, and/or the zoom
position (flash coverage angle). Keep this in
mind especially when you are using a variable
aperture zoom lens.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
●
Depending on the camera and lens you are using,
the effective flash range may be displayed. (Refer to
page 81.)
■Guide Number (GN)
Guide numbers indicate flash light intensity. The larger
the number, the farther you can reach with your flash.
From the guide number, you can easily obtain the
proper aperture setting required for an optimum
exposure.
Aperture (f/stop) =
GN/flash-to-subject distance (m)
Guide Number Table
*With the wide-angle panel attached
Camera format
Zoom position
35mm
645
67
DIGITAL
645D
85mm
70mm
50mm
35mm
28mm
55mm
70mm
19mm
35mm
35
24.5
17
12
24mm *20mm
45mm *35mm
60mm *55mm
16mm *13mm
30mm *25mm
Flash
light
intensity
150mm 135mm 100mm 70mm
190mm 180mm 120mm 90mm
58mm
106mm 87mm
54
38
27
19
13.5
9.5
6.7
ISO
48mm
34mm
62mm
45
32
22.5
16
11
8
5.6
24mm
43mm
39
27.5
19.5
13.5
9.5
1/1
1/2
1/4
50
35
24.5
17
12
8.5
6
32
22.5
16
21
14.5
10
7
ISO100
1/8
11
1/16
1/32
1/64
8.5
6
4.2
7.5
5
3.5
5
3.5
2.4
6.5
4.6
Download from Www.Somanuals.com. All Manuals Search And Download.
82
*With the wide-angle panel attached
Zoom position
50mm 35mm
Camera format
35mm
645
67
85mm
70mm
28mm
55mm
70mm
19mm
35mm
49
24mm *20mm
45mm *35mm
60mm *55mm
16mm *13mm
30mm *25mm
Flash
light
intensity
150mm 135mm 100mm 70mm
190mm 180mm 120mm 90mm
ISO
DIGITAL
645D
1/1
1/2
1/4
58mm
106mm 87mm
76
54
38
27
19
13.5
9.5
108
76
48mm
34mm
62mm
64
45
32
22.5
16
11
8
90
64
45
32
22.5
16
24mm
43mm
55
71
50
35
24.5
17
12
8.5
100
71
50
35
45
32
22.5
16
11
7.5
5
64
45
32
22.5
16
30
21
14.5
10
7
39
35
24.5
17
12
8.5
6
70
49
35
27.5
19.5
13.5
9.5
6.5
78
55
39
27.5
19.5
13.5
9.5
ISO200
1/8
1/16
1/32
1/64
1/1
1/2
1/4
5
3.5
42
30
21
14.5
10
7
54
38
27
19
ISO400
1/8
24.5
17
12
1/16
1/32
1/64
24.5
17
12
11
7.5
13.5
11
8.5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
83
High-Speed Sync Guide Number
Camera format
*With the wide-angle panel attached
Zoom position
Shutter
35mm
85mm
58mm
106mm 87mm
24.2
18.8
14
10.2
7.3
70mm
48mm
50mm
34mm
62mm
20.1
15.6
11.7
8.5
35mm
24mm
43mm
17.5
13.6
10.1
7.4
28mm
19mm
35mm
15.7
12.2
9.1
6.6
4.8
4.0
22.2
17.2
12.8
9.4
6.7
5.7
24mm *20mm
16mm *13mm
30mm *25mm
ISO
speed
DIGITAL
645D
250
500
1000
2000
4000
6000
250
500
1000
2000
4000
6000
250
500
1000
2000
4000
6000
22.4
17.4
13
9.5
6.8
14.3
11.1
8.3
9.4
7.3
5.5
4
ISO100
6
6.1
5.2
5.3
4.5
4.3
3.7
20.3
15.7
11.7
8.6
2.9
2.4
13.3
10.3
7.7
5.6
4.0
3.4
18.8
14.6
11
6.2
5.7
34.2
26.5
19.8
14.4
10.4
8.8
31.6
24.6
18.4
13.4
9.6
28.5
22.1
16.5
12.0
8.6
24.7
19.2
14.3
10.4
7.5
ISO200
6.1
5.2
8.1
7.3
6.3
48.4
37.6
28
20.4
14.6
12.4
44.8
34.8
26
19
13.6
11.5
40.2
31.2
23.4
17
12.2
10.3
35
31.4
24.4
18.2
13.2
9.6
28.6
22.2
16.6
12
27.2
20.2
14.8
10.6
8.9
ISO400
8
8.6
7.3
5.8
4.8
8.0
Download from Www.Somanuals.com. All Manuals Search And Download.
84
■P-TTL and TTL Auto Flash Effective Range
Zoom position
Camera
format
ISO 100
ISO 200
35mm 20mm 24mm 28mm 35mm 50mm 70mm 85mm 20mm 24mm 28mm 35mm 50mm 70mm 85mm
645
67
35mm 45mm 55mm 70mm 100mm 135mm 150mm 35mm 45mm 55mm 70mm 100mm 135mm 150mm
55mm 60mm 70mm 90mm 120mm 180mm 190mm 55mm 60mm 70mm 90mm 120mm 180mm 190mm
DIGITAL 13mm 16mm 19mm 24mm 34mm 48mm 58mm 13mm 16mm 19mm 24mm 34mm 48mm 58mm
645D
f/1.2
f/1.4
f/2
25mm 30mm 35mm 43mm 62mm 87mm 106mm 25mm 30mm 35mm 43mm 62mm 87mm 106mm
1.8 - 17.5 2.6 - 26.6 2.9 - 29.1 3.3 - 32.5 3.7 - 37.0 4.2 - 41.6 4.5 - 45.0 2.5 - 25.0 3.8 - 37.5 4.1 - 40.8 4.6 - 45.8 5.4 - 53.3 6.0 - 59.1 6.4 - 63.3
1.5 - 15.0 2.3 - 22.8 2.5 - 25.0 2.8 - 27.8 3.2 - 32.0 3.6 - 35.7 3.9 - 38.5 2.2 - 21.4 3.3 - 32.1 3.5 - 35.0 4.0 - 39.2 4.6 - 45.7 5.1 - 50.7 5.5 - 54.2
1.1 - 10.5 1.6 - 16.0 1.8 - 17.5 2.0 - 19.5 2.3 - 22.5 2.5 - 25.0 2.7 - 27.0 1.5 - 15.0 2.3 - 22.5 2.5 - 24.5 2.8 - 27.5 3.2 - 32.0 3.6 - 35.5 3.8 - 38.0
0.8 - 7.5 1.2 - 11.4 1.3 - 12.5 1.4 - 13.9 1.6 - 16.0 1.8 - 17.8 2.0 - 19.2 1.1 - 10.7 1.6 - 16.0 1.8 - 17.5 2.0 - 19.6 2.3 - 22.8 2.6 - 25.3 2.8 - 27.1
0.7 - 5.2 0.8 - 8.0 0.9 - 8.7 1.0 - 9.8 1.1 - 11.0 1.3 - 12.5 1.4 - 13.5 0.8 - 7.5 1.2 - 11.2 1.3 - 12.2 1.4 - 13.7 1.6 - 16.0 1.8 - 17.7 1.9 - 19.0
0.7 - 3.7 0.7 - 5.7 0.7 - 6.2 0.7 - 7.0 0.8 - 8.0 0.9 - 8.9 1.0 - 9.6 0.7 - 5.3 0.8 - 8.0 0.9 - 8.7 1.0 - 9.8 1.2 - 11.4 1.3 - 12.6 1.4 - 13.5
0.7 - 2.6 0.7 - 4.0 0.7 - 4.3 0.7 - 4.8 0.7 - 5.6 0.7 - 6.2 0.7 - 6.7 0.7 - 3.7 0.7 - 5.6 0.7 - 6.1 0.7 - 6.8 0.8 - 8.0 0.9 - 8.8 1.0 - 9.5
0.7 - 1.9 0.7 - 2.9 0.7 - 3.1 0.7 - 3.5 0.7 - 4.0 0.7 - 4.5 0.7 - 4.9 0.7 - 2.7 0.7 - 4.0 0.7 - 4.4 0.7 - 5.0 0.7 - 5.8 0.7 - 6.4 0.7 - 6.9
0.7 - 1.3 0.7 - 2.0 0.7 - 2.1 0.7 - 2.4 0.7 - 2.8 0.7 - 3.1 0.7 - 3.3 0.7 - 1.8 0.7 - 2.8 0.7 - 3.0 0.7 - 3.4 0.7 - 4.0 0.7 - 4.4 0.7 - 4.7
0.7 - 0.9 0.7 - 1.4 0.7 - 1.6 0.7 - 1.7 0.7 - 2.0 0.7 - 2.2 0.7 - 2.4 0.7 - 1.3 0.7 - 2.0 0.7 - 2.2 0.7 - 2.5 0.7 - 2.9 0.7 - 3.2 0.7 - 3.4
0.7 - 0.7 0.7 - 1.0 0.7 - 1.0 0.7 - 1.2 0.7 - 1.4 0.7 - 1.5 0.7 - 1.6 0.7 - 0.9 0.7 - 1.4 0.7 - 1.5 0.7 - 1.7 0.7 - 2.0 0.7 - 2.2 0.7 - 2.3
f/2.8
f/4
f/stop
f/5.6
f/8
f/11
f/16
f/22
f/32
(Unit: m)
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Zoom position
ISO 400
Camera
format
35mm 20mm 24mm 28mm 35mm 50mm 70mm 85mm
645
67
35mm 45mm 55mm 70mm 100mm 135mm 150mm
55mm 60mm 70mm 90mm 120mm 180mm 190mm
DIGITAL 13mm 16mm 19mm 24mm 34mm 48mm 58mm
645D
f/1.2
f/1.4
f/2
25mm 30mm 35mm 43mm 62mm 87mm 106mm
3.5 - 35.0 5.4 - 53.3 5.9 - 58.3 6.5 - 65.0 7.5 - 75.0 8.4 - 83.3 9.0 - 90.0
3.0 - 30.0 4.6 - 45.7 5.0 - 50.0 5.6 - 55.7 6.5 - 64.2 7.2 - 71.4 7.8 - 77.1
2.1 - 21.0 3.2 - 32.0 3.5 - 35.0 3.9 - 39.0 4.5 - 45.0 5.0 - 50.0 5.4 - 54.0
1.5 - 15.0 2.3 - 22.8 2.5 - 25.0 2.8 - 27.8 3.3 - 32.1 3.6 - 35.7 3.9 - 38.5
1.1 - 10.5 1.6 - 16.0 1.8 - 17.5 2.0 - 19.5 2.3 - 22.5 2.5 - 25.0 2.7 - 27.0
0.8 - 7.5 1.2 - 11.4 1.3 - 12.5 1.4 - 13.9 1.6 - 16.0 1.8 - 17.8 2.0 - 19.2
0.7 - 5.2 0.8 - 8.0 0.9 - 8.7 1.0 - 9.7 1.2 - 11.2 1.3 - 12.5 1.4 - 13.5
0.7 - 3.8 0.7 - 5.8 0.7 - 6.3 0.7 - 7.0 0.9 - 8.1 0.9 - 9.0 1.0 - 9.8
0.7 - 2.6 0.7 - 4.0 0.7 - 4.3 0.7 - 4.8 0.7 - 5.6 0.7 - 6.2 0.7 - 6.7
0.7 - 1.9 0.7 - 2.9 0.7 - 3.1 0.7 - 3.5 0.7 - 4.0 0.7 - 4.5 0.7 - 4.9
0.7 - 1.3 0.7 - 2.0 0.7 - 2.1 0.7 - 2.4 0.7 - 2.8 0.7 - 3.1 0.7 - 3.3
f/2.8
f/4
f/stop
f/5.6
f/8
f/11
f/16
f/22
f/32
(Unit: m)
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Optional Accessories
A number of dedicated accessories are available for this flash unit.
TR Power Pack-3
External power source which supplies power from six
Hot Shoe Adapter F
Adapter for connecting the camera and extension cord
C-size batteries.
F5P/F5P L. It also has a hot shoe on its top.
Off-camera Shoe Clip CL-10
Setting clip for using the AF540FGZ as a wireless slave
flash.
Extension Cord F5P/F5P L
0.5m/1.5m/L(Approx.3m)
5P synchro cord to use a flash unit for single lens reflex
camera, such as the AF540FGZ or AF360FGZ,
separately from the camera. It is used in combination
Hot Shoe Adapter F
G
Adapter for using the AF540FGZ as a separate flash
unit using the extension cord F5P/F5P L. It can be used
in combination with the built-in flash unit.
with the hot shoe adapter F or F, and/or the off-
G
camera shoe adapter F.
Hot Shoe Grip 672
Off-camera shoe adapter F
Adapter for positioning a flash unit such as the
AF540FGZ or AF360FGZ alongside the camera body.
It connects to the 672's 5P sync terminal with the
included 5P Sync Cord.
Adapter for attaching an external flash unit, etc. on a
tripod separated from the camera. It comes with a
connector for the extension cord F5P/F5P L.
● The off-camera shoe adapter F cannot be
attached to the bundled stand.
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Specifications
Type
Guide No.
Clip-on, TTL auto zoom flash unit with series control
Maximum 54 (ISO 100/m). In manual mode, seven-step adjustment from M1/1 to M1/64. The
focal lengths in the table below are for 35 mm single lens reflex cameras. (when using 35mm
format camera)
*Wide-angle panel used
(ISO 100)
Focal Length (Zoom position) 85mm 70mm 50mm 35mm 28mm 24mm 20mm*
(M1/1) (=FULL)
(M1/2)
54
38
50
35
45
32
39
27.5
19.5
13.5
9.5
35
24.5
17
32
22.5
16
21
14.5
10
7
(M1/4)
27
24.5
17
22.5
16
(M1/8)
19
12
11
(M1/16)
(M1/32)
(M1/64)
13.5
9.5
6.7
12
11
8.5
6
7.5
5
5
8.5
6
8
6.5
3.5
2.4
5.6
4.6
4.2
3.5
(ISO 200)
Focal Length (Zoom position) 85mm 70mm 50mm 35mm 28mm 24mm 20mm*
(M1/1) (=FULL)
(M1/2)
76
54
71
50
64
45
32
22.5
16
11
55
39
49
35
45
32
30
21
14.5
10
7
(M1/4)
38
35
27.5
19.5
13.5
9.5
24.5
17
22.5
16
(M1/8)
27
24.5
17
(M1/16)
(M1/32)
(M1/64)
19
12
11
13.5
9.5
12
8.5
6
7.5
5
5
8.5
8
6.5
3.5
Download from Www.Somanuals.com. All Manuals Search And Download.
88
Focal Length (Zoom position) 85mm 70mm 50mm 35mm 28mm 24mm 20mm*
(ISO 400)
(M1/1) (=FULL)
(M1/2)
108
76
54
38
27
100
71
50
35
24.5
17
90
64
45
32
22.5
16
78
55
39
27.5
19.5
13.5
9.5
70
49
35
24.5
17
12
64
45
32
22.5
16
11
42
30
21
14.5
10
7
(M1/4)
(M1/8)
(M1/16)
(M1/32)
(M1/64)
19
13.5
12
11
8.5
7.5
5
Flash duration (1/2 peak each)
Recycling time/Total number
of flashes
(M1/1) flash: Approx. 1/1200 sec. (TTL) Fastest duration time: Approx. 1/20000 sec.
Battery type Recycling time Total number of flashes
AA Alkaline (LR6)
AA Nickel-Metal Hydride (Ni-MH) (2500mAH) Approx. 6 sec.
AA Lithium (FR6) Approx. 6 sec.
TR Power Pack III (C-size alkaline LR14 batteries) Approx. 4.5 sec.
Approx. 6 sec.
Approx. 200
Approx. 250
Approx. 350
Approx. 700
Consecutive Discharge
Flash Coverage Angle
Approx. 2 frames/sec. for 50 times, at M 1/16 output (with using AA alkaline LR-6 batteries)
Auto zoom enabled with autofocus compatible camera and lens combination.
*Wide-angle panel used.
Zoom position
85mm 70mm 50mm 35mm 28mm 24mm 20mm*
Vertical Coverage
23°
31°
26°
36°
34°
46°
45°
60°
53°
70°
60°
78°
85°
98°
Horizontal Coverage
(7 step zoom)
Color temperature
Effective flash range
AF spotbeam
Daylight (Suited for daylight color film)
Approx. 0.8 m - 8.0 m (Guide No. 45, ISO 100, f/5.6)
Red beam emitted under low light or low-contrast conditions.
Effective range: Approx. 1 m - 7 m (According to our testing conditions.)
Film speed setting
ISO 25 - 1600
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Flash modes
P-TTL auto, TTL auto, auto, manual.
Flash output
compensation
In P-TTL mode, -3.0 to +1.0 levels (0.5 step increments)
Flash output setting
Wireless master, slave: (1/1 ➝ 2/3 ➝ 1/2 ➝1/3)
Manual: (1/1 ➝ 1/2 ➝ 1/4 ➝ 1/8 ➝ 1/16 ➝ 1/32 ➝ 1/64)
Flash sync mode
Wireless flash
Leading curtain sync, Trailing curtain sync, Contrast control sync, High-speed sync.
(Control system) Optical pulse transmission
(Wireless position) Master (M), control (C), slave (S)
(Channels) 1 to 4
Compatible modes: P-TTL, auto (A), manual (M)
Effective range: Approx. 4 m (When set to SL 1. According to our testing conditions.)
Bounce flash
Power saving
Vertical and horizontal bounce possible, click stops provided, lock provided at 0°.
Rightward: 0°, 30°, 60°, 90°, 120°, 150°, 180°
Leftward: 0°, 30°, 60°, 90°, 135°
Upward: 0°, 30°, 45°, 60°, 75°, 90°
Downward: 0°, -10°
Automatic power-off: After approx. 3 min. of non-operation with the power (ON). 6
minutes in Auto. After 1 hour in the wireless mode.
Quick power on: By pressing the camera’s shutter release button halfway
Red-eye reduction
Modeling flash
Operates with autofocus cameras equipped with red-eye reduction feature.
Modeling button (MODELING) discharges flash consecutively for 1 second.
Wide-angle panel
Catchlight panel
Pull out manually and flash zoom position sets to 20mm.
Pull out manually.
LCD panel illumination
LCD panel illumination button (LIGHT) illuminates the LCD panel for about 10 sec. or press
the button again to turn it off.
Power source
Four AA batteries, (Alkaline (LR6), Nickel-Metal Hydride (Ni-MH), or Lithium (FR6))
Optional external power source: TR Power Pack-3
Dimensions and weight
76 mm (W) × 142 mm (H) × 107 mm (T) (3.0'' × 5.6'' × 4.2'')
380 g (13.4 oz.) without batteries
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Warranty Policy
All PENTAX camera accessories purchased through authorized bona fide photographic distribution channels are guaranteed
against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered,
and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of
impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating
instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be
liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay
or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or
workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all
guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as herein before
provided. No refunds will be made on repairs performed by non-authorized PENTAX service facilities.
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should be returned to the dealer from whom you
purchased the equipment or to the manufacturer. If there is no representative of the manufacturer in your country, send the
equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the
equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by
warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion
of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will
apply. Shipping charges are to be borne by the owner. If your PENTAX was purchased outside of the country where you wish
to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s
representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of
charge according to this procedure and warranty policy.
In any case, however, shipping charges and customs clearance fees are to be borne by the sender. To prove the date of your
purchase when required, please keep the receipts or bills covering the purchase of your equipment for at least a year. Before
sending your equipment for servicing, please make sure that you are sending it to the manufacturer’s authorized
representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a
quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed
with the servicing.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
This warranty policy does not affect customer’s statutory rights.
The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy.
Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact
the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
For customers in the USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs an Canada
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Information for Users on Collection and Disposal of Old Equipment and Used Batteries
1. In the European Union
2. In other countries outside the EU
These symbols on the products, packaging
and/or accompanying documents mean that
used electrical and electronic equipments
and batteries should not be mixed with
general household waste.
These symbols are only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of
disposal.
For Switzerland: Used electrical/electronic
equipment can be returned free of charge to
the dealer, even when you don't purchase a
new product. Further collection facilities are
Used electrical/electronic equipments and batteries must
be treated separately and in accordance with legislation
that requires proper treatment, recovery and recycling of
these products.
Following the implementation by member states, private
households within the EU states may return their used
electrical/electronic equipments and batteries to designated
collection facilities free of charge*.
In some countries your local retailer may also take back
your old product free of charge if you purchase a similar
new one.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a
designation for the chemical element or compound in use.
In this case you have to comply with the requirement set by
the Directive for the chemicals involved.
*Please contact your local authority for further details.
By disposing of this product correctly you will
help ensure that the waste undergoes the
necessary treatment, recovery and recycling
and thus prevent potential negative effects
on the environment and human health which
could otherwise arise due to inappropriate
waste handling.
Download from Www.Somanuals.com. All Manuals Search And Download.
93
HOYA CORPORATION
PENTAX Imaging Systems Division
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX Europe Imaging Systems S.A.S.112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex, FRANCE
(European Headquarters)
(HQ - http://www.pentaxeurope.com)
(France - http://www.pentax.fr)
PENTAX Imaging Systems GmbH
PENTAX Imaging Systems Limited
PENTAX Imaging Company
Julius-Vosseler-Strasse 104, 22527 Hamburg, GERMANY
(http://www.pentax.de)
PENTAX House, Heron Drive, Langley, Slough, Berks SL3 8PN, U.K.
(http://www.pentax.co.uk)
(Headquarters)
A Division of PENTAX of America, Inc. 600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
250 North 54th Street Chandler, Arizona 85226, U.S.A.
(http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7, CANADA
(http://www.pentax.ca)
PENTAX Trading (SHANGHAI) Limited
23D, Jun Yao International Plaza, 789 Zhaojiabang Road, Xu Hui District,
Shanghai, 200032 CHINA
(http://www.pentax.com.cn)
The CE Mark is a Directive conformity mark of the European Union.
✩Specifications and external dimensions are subject to change without notice.
Copyright © HOYA CORPORATION 2010
H05-201006W
57546
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|