®
C06HWC
Pre-wired Interconnecting
Cable
Installation/Operation
Manual C940M-C (9/95)
Please thoroughly familiarize yourself with the infor-
mationinthismanualpriortoinstallationandoperation.
1.0 SCOPE
The information within this manual covers the installa-
tion and operation of the C06HWC pre-wired intercon-
necting cable.
2.0 DESCRIPTION
The C06HWC is a pre-wired 6 foot cable designed for
use with Pelco hard-wire controls for pan/tilts, scanners
and motorized lenses. The pre-wired cable is supplied
with a 14-pin control connector on one end and butt
splices on the mating end for the pan/tilt or lens, allow-
ing for a quick and easy field installation. Compatible
controls are listed below:
Prior to installation and use of this product, the follow-
ing WARNINGS should be observed.
1.
2.
Installation and Servicing should only be
done by Qualified Service Personnel.
The installation shall be done in accordance
with all local and national electrical and
mechanical codes utilizing only approved
materials.
*MLZ6DT
*MLZA6DT
MPT24DT
MPTA24DT/220
MPT24DT/220 MPTA24DT
MPT115DT
MPTA220DT
MPTA115DT MPT220DT
PT506-24DT PT506-24A
PT506-24DT/220 PT506-24A/220
3.
Unlessthecableisspecificallymarked“WA”
(for use in wet locations), the cable is de-
signed for indoor use only and it must not be
installed where exposed to rain and mois-
ture.
* Compatible only when not used with the AI700
(Auto-iris).
PELCO • 3500 Pelco Way, Clovis, CA 93612-5699 • (559) 292-1981 • (800) 289-9100
FAX (800) 289-9150 or (559) 292-3827
Download from Www.Somanuals.com. All Manuals Search And Download.
6.0 TROUBLESHOOTING GUIDELINES
NOTE: If you find the environmental dome
or pan/tilt has the pan and tilt functions operat-
ing backwards (e.g., “Tilt Up” actually tilts
down and “Pan Right” actually pans left), pins
3 and 7 for pan and pins 5 and 6 for tilt have
been reversed. The problem can be corrected
in the field with a CPC pin/socket extracting
tool by simply exchanging the reversed func-
tion. If you do not have the necessary tool, con-
tact Pelco for a R/A number to exchange the
cable.
1. If none of the functions in Section 5.1 operate cor-
rectly, check the connection of the CPC connector
to the control unit.
2. If the connection is loose, tighten the lock ring on
the CPC connector and start the system test proce-
dure in Section 5.1.
3. If the connections are tight, check the butt splices
to determine if the splices were made correctly. If
the butt splices are correctly made, there may be a
problem with the control unit, pan/tilt, or lens.
Pelco’s Technical Assistance Program (TAP)
should be contacted for further technical trouble-
shooting aid. To contact the TAP line, call 1-800-
289-9100.
7.0 SCHEMATICS
Figure 1 is a wiring diagram of the pre-wired cable. It
may be used to troubleshoot wiring problems.
NOTE: WIRE COLORS FOR PIN 13 REVISED 9/95.
Figure 1. C06HWC Wiring Diagram
PELCO Manual C940M-C (9/95)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
8.0 WARRANTY AND RETURN
INFORMATION
WARRANTY
RETURNS
Pelco will repair or replace, without charge, any merchandise proved
defectiveinmaterialorworkmanshipforaperiodofoneyearafterthedate
of shipment.
In order to expedite parts returned to the factory for repair or credit, please
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an
authorization number (CA number if returned for credit, and RA number
if returned for repair).
Exceptions to this warranty are as noted below:
All merchandise returned for credit may be subject to a 20% restocking
and refurbishing charge.
Goods returned for repair or credit should be clearly identified with the
assigned CA or RA number and freight should be prepaid. Ship to the
appropriate address below.
•
•
Five years on FT/FR8000 Series fiber optic products.
Three years on Genex® Series products (multiplexers, server, and
keyboard).
Three years on Camclosure® and fixed camera models, except the
CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2,
and MC3651H-2X camera models, which have a five-year warranty.
•
If you are located within the continental U.S., Alaska, Hawaii or Puerto
Rico, send goods to:
Service Department
Pelco
•
•
Two years on standard motorized or fixed focal length lenses.
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and
DF5/DF8 Series fixed dome products.
3500 Pelco Way
Clovis, CA 93612-5699
If you are located outside the continental U.S., Alaska, Hawaii or Puerto
Rico and are instructed to return goods to the USA, you may do one of the
•
•
•
Two years on Spectra®, Esprit®, ExSite™, and PS20 scanners, includ-
ing when used in continuous motion applications.
Two years on Esprit® and WW5700 Series window wiper (excluding
wiper blades).
following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Eighteen months on DX Series digital video recorders, NVR300
Series network video recorders, and Endura™ Series distributed
network-based video products.
Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA
•
•
One year (except video heads) on video cassette recorders (VCRs).
Video heads will be covered for a period of six months.
If the goods are to be sent by a FREIGHT FORWARDER, send the goods
to:
Six months on all pan and tilts, scanners or preset lenses used in
continuousmotionapplications(thatis,presetscan,tourandautoscan
modes).
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
Pelco will warrant all replacement parts and repairs for 90 days from the
date of Pelco shipment. All goods requiring warranty repair shall be sent
freight prepaid to Pelco, Clovis, California. Repairs made necessary by
reason of misuse, alteration, normal wear, or accident are not covered
under this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or
loss resulting from the specific use or application made of the Products.
Pelco’s liability for any claim, whether based on breach of contract,
negligence, infringement of any rights of any party or product liability,
relating to the Products shall not exceed the price paid by the Dealer to
Pelco for such Products. In no event will Pelco be liable for any special,
incidental or consequential damages (including loss of use, loss of profit
and claims of third parties) however caused, whether by the negligence
of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The
Dealer may also have additional rights, which are subject to variation from
state to state.
Ifawarrantyrepairisrequired,theDealermustcontactPelcoat(800) 289-
9100 or (559) 292-1981 to obtain a Repair Authorization number (RA),
and provide the following information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice
number
®
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall
under the warranty conditions stated above, please include a written
explanation with the product when returned.
Method of return shipment shall be the same or equal to the method by
which the item was received by Pelco.
Pelco
3500 Pelco Way, Clovis, CA 93612-5699 (559)
292-1981 • (800) 289-9100
FAX (800) 289-9150 or (559) 292-3827
International customers call 1-559-292-1981 or
FAX 1-559-348-1120
(Product specifications subject to change
without notice.)
Pelco, the Pelco logo, Camclosure, Esprit,
Genex, Legacy, and Spectra are registered
trademarks of Pelco.
Endura and ExSite are trademarks of Pelco.
C940M-C
© Copyright 1995, Pelco. All rights reserved.
4
PELCO Manual C940M-C (9/95)
Download from Www.Somanuals.com. All Manuals Search And Download.
|