C220M-C (7/99)
MR3000/MR3050
Universal Monitor Mount
®
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
3500 Pelco Way,
Clovis, CA 93612-5699
USA
1. Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
2. Installation shall be done in accordance with all local and national electrical and mechanical
codes utilizing only approved materials.
International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120
3. Use only installation methods and materials capable of supporting four times the maximum
specified load.
The product and/or manual may bear the following marks:
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
C A U T I O N :
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Please thoroughly familiarize yourself with the information in this manual prior to installation and
operation.
DESCRIPTION
The MR3000 and MR3050 are universal monitor mounts engineered to safely mount a monitor from
either a ceiling or a wall. They are designed for use in security systems, educational institutions,
churches, hospitals, and other applications requiring flexibility in monitor mounting and positioning.
The mounts are adjustable to accommodate various sizes of monitors (refer to the Specifications
section for dimensions). Two optional adapters are available: the MRWA for wall mounting and
the MRCA for ceiling mounting. An 8-inch (20 cm) length of 1-1/2-inch (3.81 cm) NPT pipe is
provided with the mount.
Recommended Mounts Adapters
MRWA
MRCA
Wall mount, uses six 5/16-inch diameter fasteners (not supplied).
Ceiling mount, uses four 5/16-inch diameter fasteners (not supplied).
INSTALLATION
MRCA/MRWA Adapter Mounting
1. Determine the mounting location. Remember to allow for adequate clearance on all sides of
the monitor.
CAUTION:The
mounting surface must
be capable of support-
ing four times of the weight of the
mount and monitor.
2. Use the adapter mount as a template to mark the required mounting holes.
3. Using the necessary fasteners, attach the adapter mount to the chosen surface.
MR3000/MR3050 Installation
1. Determine the width that the base (item 1, Figure 1) must be positioned to accommodate
the monitor. Allow room for the side brackets (item 2, Figure 1).
2. Attach the two base support brackets (item 13, Figure 1) to the base.
3. Thread the 8-inch (20 cm) pipe supplied into the ceiling/wall adapter.
4. Thread the collar adapter and attached crossbar (already assembled) onto the end of the
8-inch (20 cm) pipe.
5. Slide the side brackets (item 2, Figure 1) onto the crossbar and thread on the 1/4-20 bolts.
Do not tighten bolts yet; you will do so in step 7.
6. Attach the base to the side brackets using the four 3/8-16 bolts supplied. Do not tighten
bolts yet; you will do so in step 10.
7. Tighten the 1/4-20 bolts that attach the side brackets to the crossbar (installed in step 5).
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1. MR3000/MR3050 Exploded Assembly Diagram
Table A. MR3000/MR3050 Exploded Assembly Parts List
Item
Qty.
Description
Part Number
1
2
2
1
Base
MR3000
MR3050
Adjustable side bracket
MR3000
MR30004000COMP
MR30504001COMP
2
3
MR30004001COMP
MR30504003COMP
MR3050
Crossbar
MR3000
MR3050
Collar adapter
Lock nut
Set screw, 1/4-20 x 1/4-inch
Screw, hex head, 1/4-20 x 1/2-inch
Flat washer
Modified fender washer
Bolt, 3/8-16 x 1/2-inch
Flat washer
MR30004005COMP
MR30504000COMP
MR30004103COMP
ZH1/213NUTCHN
ZH1/420X.250S
ZH1/4-20X.500CH
ZH260X562X65C
MR30504104COMP
ZH3/816X.500SH
ZH377X880X78
4
5
6
7
8
1
1
2
6
6
1
4
4
1
2
9
10
11
12
13
Bolt, 1/2-13 x 1-inch
Base support bracket
MR3000
ZH1/213X1.00CH
MR30004004COMP
MR30504002COMP
MR3050
14
1
Pipe nipple, 8-inch L x 1-1/2-inch NPT
(not shown)
MRU4207COMP
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Tilt Angle:
Adjustable ±45°
Maximum Load
MR3000:
40 lb (18 kg)
MR3050:
65 lb (29.45 kg)
Construction: Steel
Finish:
Black polyester powder coat
Dimensions: See Figure 2
Unit Weight
MR3000:
MR3050:
12 lb (5.44 kg)
20 lb (9.07 kg)
(Design and product specifications subject to
change without notice.)
Figure 2. MR3000/MR3050 Dimension Drawing
WARRANTY AND RETURN INFORMATION
WARRANTY
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following
information:
Pelco will repair or replace, without charge, any merchandise proved defective in material
or workmanship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
• Five years on FT/FR8000 Series fiber optic products.
• Three years on Genex® Series products (multiplexers, server, and keyboard).
• Three years on Camclosure® and fixed camera models, except the CC3701H-2,
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera
models, which have a five-year warranty.
If there is a dispute regarding the warranty of a product which does not fall under the
warranty conditions stated above, please include a written explanation with the product
when returned.
• Two years on standard motorized or fixed focal length lenses.
• Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series
fixed dome products.
Method of return shipment shall be the same or equal to the method by which the item
was received by Pelco.
RETURNS
• Two years on Spectra®, Esprit®, ExSite™, and PS20 scanners, including when used in
continuous motion applications.
In order to expedite parts returned to the factory for repair or credit, please call the factory
at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if
returned for credit, and RA number if returned for repair).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing
charge.
• Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).
• Eighteen months on DX Series digital video recorders, NVR300 Series network video
recorders, and Endura™ Series distributed network-based video products.months on DX
Series digital video recorders, NVR300 Series network video recorders, Endura™ Series
distributed network-based video products, and TW3000 Series twisted pair transmission
products.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA
number and freight should be prepaid. Ship to the appropriate address below.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods
to:
• One year (except video heads) on video cassette recorders (VCRs). Video heads will be
covered for a period of six months.
Service Department
Pelco
• Six months on all pan and tilts, scanners or preset lenses used in continuous motion
applications (that is, preset scan, tour and auto scan modes).
3500 Pelco Way
Clovis, CA 93612-5699
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,
California. Repairs made necessary by reason of misuse, alteration, normal wear, or
accident are not covered under this warranty.
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are
instructed to return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting
from the specific use or application made of the Products. Pelco’s liability for any claim,
whether based on breach of contract, negligence, infringement of any rights of any party
or product liability, relating to the Products shall not exceed the price paid by the Dealer to
Pelco for such Products. In no event will Pelco be liable for any special, incidental or
consequential damages (including loss of use, loss of profit and claims of third parties)
however caused, whether by the negligence of Pelco or otherwise.
Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
The above warranty provides the Dealer with specific legal rights. The Dealer may also
have additional rights, which are subject to variation from state to state.
REVISION HISTORY
Manual # Date
Comments
C220M
5/91
4/93
11/94
7/99
Original version.
C220M
C220M-B
C220M-C
Rev. A. Revised pages 2-5. New Figures 1 and 2 and Section 3.2 and 5.0 revised.
Rev. B. Revised to 2-column Format. Incorporated new Figure 1 and revised Sections 2.2 and 4.0 per ECO #94-379.
Added MR3050 mount. Added Recommended Mount Adapters section. Modified specifications. Updated to new format.
® Pelco, the Pelco logo, Spectra, Esprit, Genex, Legacy, and Camclosure are registered trademarks of Pelco.
™ Endura and ExSite are trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|