INSTALLATION/OPERATION
IPS-CABLE
Serial Interface Cable
For use with Windows®-Based Computers
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
User Supplied Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Uploaded Software (Spectra III, Spectra IV, and ExSite Systems Only) . . . . . . . . . . . . . . . . . . . . . . . 5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the Control/Upload Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the IPS-CABLE: 9-Pin Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing the IPS-CABLE: USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Controlling the Camera System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PTZ Control Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Uploading the Software (Spectra III, Spectra IV, and ExSite Systems Only). . . . . . . . . . . . . . . . . . . 11
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
List of Illustrations
IPS-CABLE Installation with 9-Pin Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
IPS-CABLE Installation with USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Downloader II Application Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PTZ Control Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Downloader II Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Browsing for a Download File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Download Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
The IPS-CABLE provides the serial interface between an IPS-RDPE-2 remote data port or Spectra® dome
system and a Microsoft® Windows®-based computer. The interface cable transmits data for local viewing,
configuration, and pan/tilt/zoom (PTZ) control of Spectra™ III, Spectra IV, Esprit®, and ExSite® Series
systems. The cable can also upload revised operating software and language files to Spectra III,
Spectra IV, and ExSite Series systems.
NOTES:
•
•
The IPS-CABLE is not compatible with Spectra II and earlier dome systems.
The Palm® OS-compatible handheld and iPAQ Pocket PC methods for downloading Spectra and
ExSite software are obsolete. Use the Windows-based computer method to download newer
versions of Spectra and ExSite software. The Palm OS and iPAQ Pocket PC handhelds can still be
used to control a camera system or to download older versions of camera software.
PARTS LIST
The following parts are supplied:
Qty Description
1
1
1
1
IPS-CABLE interface cable
USB-to-serial portable adapter cable
Male-to-male adapter
Resource disc
USER SUPPLIED PARTS LIST
A null modem cable is required for the installation (refer to Figure 1 on page 7) but is not supplied.
UPLOADED SOFTWARE (SPECTRA III, SPECTRA IV, AND EXSITE
SYSTEMS ONLY)
Uploaded software files contain a file name that identifies the software version. For example, file name
sp4app2301.h64 is the application software for Spectra IV version 2.301.
To upload software using the IPS-RDPE-2 remote data port, the following system software must be
installed:
•
•
•
Spectra III and Spectra IV dome drives: Require version 1.2 or later.
ExSite explosion-proof system: Requires version 1.13 or later.
Esprit system: Software cannot be uploaded to an Esprit system.
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Installation
To interface with a Spectra dome drive or IPS-RDPE-2 remote data port using a Windows-based computer,
you must install the control/upload utility before you install the IPS-CABLE.
The control/upload utility is compatible with the following operating systems:
Windows 95
Windows 98
Windows ME
Windows 2000
Windows XP
Windows NT® with service pack 6
INSTALLING THE CONTROL/UPLOAD UTILITY
1. Insert the Resource disc into the CD drive. The main menu appears.
NOTE: If autoplay is not enabled on your system, navigate to the CD drive and select Start to open the
main menu.
2. Click the Control/Upload Utility button for the desired system. The Install Shield Wizard starts.
3. Follow the instructions displayed on the monitor.
6
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE IPS-CABLE: 9-PIN SERIAL CONNECTION
To install the IPS-CABLE to computers with a 9-pin serial connection, refer to Figure 1 and perform the
following steps:
1. Connect a null modem cable (not supplied) to the COM1 or COM2 serial port on the computer.
2. Connect the 9-pin male connector from the IPS-CABLE (supplied) to the null modem cable.
3. Connect the IPS-CABLE to the RJ-45 port of the desired dome drive or IPS-RDPE-2.
NOTE: When connected, the IPS-CABLE will interrupt control from the normal control source.
RJ-45 PORT
OF SPECTRA
RJ-45 PORT
OF PS-RDPE-2
OR
CONNECT
TO
BNC CONNECTOR
TO VIDEO INPUT
ON MONITOR
IPS-CABLE
DB-9
MALE
COMPUTER
COM 1
COM 2
CONNECT TO
COM 1 OR COM 2
ON COMPUTER
NULL MODEM CABLE
(NOT SUPPLIED)
Figure 1. IPS-CABLE Installation with 9-Pin Serial Connection
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
INSTALLING THE IPS-CABLE: USB CONNECTION
To install the IPS-CABLE to computers with a USB connection, refer to Figure 2 and perform the following
steps:
1. Connect the USB-to-serial portable adapter cable (supplied) to the USB port on the computer, and
then connect it to the male-to-male adapter (supplied).
2. Connect the 9-pin male connector from the IPS-CABLE (supplied) to the male-to-male adapter, and
then connect it to the USB-to-serial portable adapter cable.
3. Connect the IPS-CABLE to the RJ-45 port of the desired dome drive or IPS-RDPE-2.
NOTE: When connected, the IPS-CABLE will interrupt control from the normal control source.
RJ-45 PORT
OF SPECTRA
RJ-45 PORT
OF PS-RDPE-2
OR
CONNECT
TO
BNC CONNECTOR
TO VIDEO INPUT
ON MONITOR
IPS-CABLE
DB-9
MALE
COMPUTER
MALE-TO-MALE ADAPTER
CONNECT TO
USB PORT ON
COMPUTER
USB-TO-SERIAL PORTABLE
ADAPTER CABLE
Figure 2. IPS-CABLE Installation with USB Connection
8
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
CONTROLLING THE CAMERA SYSTEM
1. Click the application icon located on your desktop. The Downloader II window appears.
Figure 3. Downloader II Application Window
2. Select the system type, and then type the unit address. The valid communication configuration
options are configurable based on the unit type.
3. Select the port from the list of valid ports located on the right side of the window.
4. Click the Fast or Auto Baud + Id buttons for a quick connection to the unit.
C2458M-F (4/11)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PTZ CONTROL MENU
The PTZ Control window contains the following buttons (refer to Figure 4):
Directional buttons/sliders:
•
The directional buttons (Up, Down, Left, Right, and Stop), located in the middle of the window,
control the pan and tilt function.
•
Alternatively, you can control the pan and tilt function using the sliders, which are located to the
right and beneath the directional buttons.
Open/Close: Sends a command to the camera to open or close the Iris. In Menu mode, the Open and
Close Iris commands select and release menu options.
Reset PTZ: Sends a reset command to the dome drive, causing it to restart.
Reset Camera: Sends a reset command to the integrated optics package (IOP), causing it to restart.
Near/Far: Provides focus adjustment capability.
Tele/Wide: Provides zoom capability.
Menu: Accesses the camera menu.
Return: Returns you to the main menu.
Exit: Closes the PTZ Control and Downloader II menus.
Figure 4. PTZ Control Window
10
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
UPLOADING THE SOFTWARE (SPECTRA III, SPECTRA IV, AND
EXSITE SYSTEMS ONLY)
The following system software must be installed to upload software using the IPS-RDPE-2 remote data
port:
•
•
•
Spectra III and Spectra IV dome drives: Require version 1.2 or later.
ExSite explosionproof system: Requires version 1.13 or later.
Esprit system: Software cannot be uploaded to an Esprit system.
To upload software:
1. Click the application icon located on your desktop.
2. Insert the Resource disc into the CD drive.
3. After connecting to the unit, select the Download button located at the bottom of the Downloader II
Figure 5. Downloader II Window
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Once selected, the file is downloaded to the unit and status information appears in the Download window.
Figure 7. Download Window
5. Wait until the Configure Done message appears before disconnecting the IPS-CABLE.
WARNING: To prevent damage to the system, never cycle power or attempt control of the system
during the upload process. The upload process is not complete until the system reboots and the
Configure Done message appears.
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
13
REVISION HISTORY
Manual #
C2458M
Date
7/02
4/03
1/04
8/04
7/05
10/06
4/11
Comments
Original version.
Added IPS-RDPE-2 and Esprit information.
Revised per ECO 93-9497 for software revision.
Added COM2 port to PC section per ECO 04-9702.
Added ExSite system information.
Made references to Spectra more generic by removing series numbers. Added RoHS label.
Removed the Palm OS-compatible handheld and iPAQ Pocket PC methods for downloading
Spectra III, Spectra IV, and ExSite software. Updated information on uploading software and
controlling a system using a Windows-based computer. Added a graphic showing a USB
connection.
C2458M-A
C2458M-B
C2458M-C
C2458M-D
C2458M-E
C2458M-F
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates.
All other product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
© Copyright 2011, Pelco, Inc. All rights reserved.
14
C2458M-F (4/11)
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of
shipment.
Exceptions to this warranty are as noted below:
•
•
Five years:
–
–
–
Fiber optic products
Unshielded Twisted Pair (UTP) transmission products
CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models
Three years:
–
–
–
–
–
–
Pelco-designed fixed network cameras and network dome cameras with Sarix™ technology.
Pelco-branded fixed camera models (CCC1390H Series, C10DN Series, C10CH Series, and IP3701H Series)
EH1500 Series enclosures
Spectra® IV products (including Spectra IV IP)
Camclosure® Series (IS, ICS, IP) integrated camera systems
DX Series digital video recorders (except DX9000 Series which is covered for a period of one year), DVR5100 Series digital video recorders,
Digital Sentry® Series hardware products, DVX Series digital video recorders, and NVR300 Series network video recorders
–
–
–
–
Endura® Series distributed network-based video products
Genex® Series products (multiplexers, server, and keyboard)
PMCL200/300/400 Series LCD monitors
PMCL5xx Series FHD monitors
•
Two years:
–
–
–
–
–
–
–
–
Standard varifocal, fixed focal, and motorized zoom lenses.
DF5/DF8 Series fixed dome products
Legacy® Series integrated positioning systems
Spectra III™, Spectra Mini, Spectra Mini IP, Esprit®, ExSite®, and PS20 scanners, including when used in continuous motion applications.
Esprit Ti and TI2500 Series thermal imaging products
Esprit and WW5700 Series window wiper (excluding wiper blades).
CM6700/CM6800/CM9700 Series matrix
Digital Light Processing (DLP®) displays (except lamp and color wheel). The lamp and color wheel will be covered for a period of 90 days.
The air filter is not covered under warranty.
–
Intelli-M® eIDC controllers
•
•
One year:
–
Video cassette recorders (VCRs), except video heads. Video heads will be covered for a period of six months.
Six months:
–
All pan and tilts, scanners, or preset lenses used in continuous motion applications (preset scan, tour, and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent
freight prepaid to a Pelco designated location. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under
this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s
liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products
shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental, or consequential
damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state
to state.
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and
provide the following information:
1. Model and serial number
2. Date of shipment, P.O. number, sales order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product that does not fall under the warranty conditions stated above, please include a written
explanation with the product when returned.
Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.
RETURNS
To expedite parts returned for repair or credit, please call Pelco at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if
returned for credit, and RA number if returned for repair) and designated return location.
All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid.
2-10-10
The materials used in the manufacture of this document and its components are compliant to the requirements of
Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive
2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE).
Contact your local dealer for procedures for recycling this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Pelco by Schneider Electric 3500 Pelco Way Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
Download from Www.Somanuals.com. All Manuals Search And Download.
|