Pelco Sleep Apnea Machine C1300M C 11 08 User Manual

O P E R AT I O N / P R O G R A M M I N G

ExSite Series

Explosionproof

Positioning System

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Set the Calibration Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

How to Operate Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Accessing Main Menu (Preset 95). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

CM6700/CM6800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

KBD200A/KBD300A (Direct Mode Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

CM9500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

CM9740/CM9760/CM9770/CM9780. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

KBD4000/KBD4002 (Genex multiplexer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

MPT9500. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PelcoNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Quick Start Guide – System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Unit Inversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Display Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Label Position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Unit Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Type of Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Auto Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Zoom Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Zoom Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Low Light Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

IR Cut Filter (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Advanced Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Shutter Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

AGC Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Auto Iris. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Auto Sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Auto White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Backlight Compensation (BLC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Video Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Wide Dynamic Range (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Proportional Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Park Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Scan Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

preset freeze frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Limit Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Azimuth Zero. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Power Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Power Up Action. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Line Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Enable Motion Detection (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Edit Detection Areas (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Activate AUX Command (23X Day/Night Camera). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

AUX Time (23X Day/Night Camera) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Window Blanking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Clear Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Blank All Above/Blank All Below . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Wiper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Wiper Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Wiper Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Wiper Dwell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Wiper Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Set Washer Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

AUX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Clear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Position Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Reset, Cycle Power, Reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Reset Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Cycle Camera Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Reboot System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Software/Language File Upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Upload Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.”

This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to

operate this equipment under Federal Communications CommissionÕs rules.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Welcome

Thank you for purchasing Pelco’s ExSite™ IPSXM Series explosionproof positioning system. Your new system features a high resolution,

camera/optics package with programmable software.

This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about the

features and commands of your IPSXM system, as well as a detailed menu tree.

MODELS

IPSXM30C22-2

IPSXM30C22-2X

IPSXM31C22-2

IPSXM31C22-2X

Pan and tilt system with color camera, 60 Hz, 24 VAC

Pan and tilt system with color camera, 50 Hz, 24 VAC

Same as IPSXM30C22-2, except supplied with window wiper

Same as IPSXM30C22-2X, except supplied with window wiper

IPSXM30CBW23-2 Pan and tilt system with day/night camera, 60 Hz, 24 VAC

IPSXM30CBW23-2X Pan and tilt system with day/night camera, 50 Hz, 24 VAC

IPSXM31CBW23-2 Same as IPSXM30CBW23-2, except supplied with window wiper

IPSXM31CBW23-2X Same as IPSXM30CBW23-2X, except supplied with window wiper

IPSXM30C22-7

IPSXM30C22-7X

IPSXM31C22-7

IPSXM31C22-7X

Pan and tilt system with color camera, 60 Hz, 90-264 VAC

Pan and tilt system with color camera, 50 Hz, 90-264 VAC

Same as IPSXM30C22-7, except supplied with window wiper

Same as IPSXM30C22-7X, except supplied with window wiper

IPSXM30CBW23-7 Pan and tilt system with day/night camera, 60 Hz, 90-264 VAC

IPSXM30CBW23-7X Pan and tilt system with day/night camera, 50 Hz, 90-264 VAC

IPSXM31CBW23-7 Same as IPSXM30CBW23-7, except supplied with window wiper

IPSXM31CBW23-7X Same as IPSXM30CBW23-7X, except supplied with window wiper

GETTING STARTED

You will need to install your system before using this manual. Refer to the installation manuals for instructions. Once installed apply power

to the system. The system will begin a configuration sequence that starts with a limited back and forth pan motion (wiggling) for 2.5

minutes. The limited pan motion is a built-in safety feature to warn anyone at the installation site that the unit is on and to avoid contact

with the unit during start up. To stop the limited pan motion press Iris Close. The system will continue its configuration sequence. When the

system is done, the following information is displayed:

Pelco ExSite IPSXM

Version X.XX

D Address: 1

P Address: 2

Comm 2400, N, 8, 1

CONFIGURE DONE

This information will remain on the monitor until system operation begins. Refer to the following pages to learn how to operate and

program your IPSXM Series positioning system.

DANGER: Do not connect the power module to a supply circuit unless all ExSite system components (pan and tilt, camera

module and power module) are installed.

SET THE CALIBRATION POINT

Before programming presets, patterns, zones, labels, and window blanking, program and document the position calibration point (refer to

Position Calibration). The purpose of the calibration point is to restore all programmed settings quickly in the event the unit is replaced or

refurbished.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

How to Operate Your System

Operation

Pan and Tilt

Zoom Far

How to Control

Move joystick or press the direction keys left/right and up/down.

To zoom far, do the following:

1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit.

2. Release the button or joystick for one second.

3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you

want or reach the digital zoom* limit.

Zoom Wide

Press the Zoom Wide button or turn the joystick counterclockwise.

Scanning

Stop Scan

Preset 96

Random Scan Preset 97

Frame Scan

Auto Scan

Preset 98

Preset 99

Presets

Refer to the documentation supplied with the control system.

Refer to the Zones section and to the documentation supplied with the control system.

Refer to the Alarms section.

Patterns**

Zones

Alarms

*Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the greater the

reduction in resolution.

**The unit cannot do electronic zoom in a pattern. Optical zoom will operate in a pattern.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

ACCESSING MAIN MENU (PRESET 95)

You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode).

Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset

95 are given below for various Pelco controllers.

CM6700/CM6800

1. Enter the number of the IPSXM system and press the CAM key.

2. Enter 95 and hold the PRESET key for two seconds.

3. In the Edit Preset menu, arrow to SET and press the ACK key. The main menu appears.

KBD200A/KBD300A (DIRECT MODE ONLY)

1. Enter 95.

2. Hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

CM9500

1. Enter the number of the IPSXM system and press the CAM key. The Main menu appears.

2. Highlight SETUP in the Main menu and press the SELECT key.

3. Highlight CAM in the Setup menu and press the SELECT key.

4. Highlight PRESET in the Camera menu and press the SELECT key.

5. Enter 95 and press the F1 key. The main menu appears.

CM9740/CM9760/CM9770/CM9780

1. Press the ESCAPE key to open the Main menu. Select DEF. The Define Submenu appears.

2. Enter your four-digit PIN if this is your first time entering this mode.

3. Enter 95 and select PRST. The main menu appears on the monitor.

4. Select the Quit icon to return to the default menu.

KBD4000/KBD4002 (GENEX MULTIPLEXER)

1. Press the SPOT MONITOR key.

2. Enter the number of the IPSXM system and press the CAM key.

3. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

MPT9500

Standard Coaxitron Mode

1. Enter 95 and press the PRESET SET key.

2. Position the asterisk in the YES row and press the F1 key. The main menu appears.

Extended Coaxitron or RS-485 Mode

1. Enter 95 and press the PRESET SET key.

2. Press the F2 key. The main menu appears.

PelcoNet

1. Check the Set box.

2. Click the preset 95 button. The main menu appears.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Start Guide: System Setup

PELCO EXSITE IPSXM

LANGUAGE

UNIT INVERSION

Quick Programming Guide

Access the main menu (preset 95). See the Accessing

Main Menu (Preset 95) section.

Use the joystick to position the cursor beside

menu selection. If your controller does not have a

joystick, use the up or down key.

Presets

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

The following presets are reserved for special functions.

Preset

Function

Flip command (disabled)

Wiper

Press Iris Open; the submenu/cursor moves to the right.

EXIT

90-91

92-93

Washer

IR ﬁlter IN (color)

IR ﬁlter OUT (black-white)

Manual limit stops

Scan limit stops

Select main programming menu

Stop a scan

Move the joystick up or down to view selections.

If your controller does not have a joystick, use the

up or down key.

DISPLAY SETUP

PRESET LABEL

ZONE LABEL

ZOOM

AZMUTH/ELEVATION

DIRECTION

ADDITIONAL

FREE MEMORY

LAST RESET

AZIMUTH ZERO OFFSET

MOTOR ACTIVE

CAMERA ACTIVE

FPGA VERSION

VIDEO LEVEL

CAMERA

SYSTEM INFORMATION

LABEL POSITION

UNIT SETTINGS

<ZONES>

<WIPER>

POSITION CALIBRATION

PRESET NOT DEFINED

UNIT MODEL

[ZONE LABEL- - - - - - - -]

[PRESET LABEL- - - ---]

[ALARM 1- - - - - - -]

Press Iris Open to make selection.

POWER MODULE MEMORY

SOFTWARE VERSION

BIOS VERSION

Random scanning

Frame scanning

Start auto scanning

FONT VERSION

SAVE AND EXIT

CANCEL AND EXIT

HELP

ALARM MESSAGE

Press Iris Close to cancel selection.

COMM

D ADDRESS

P ADDRESS

CM9500 MODE

32 PRESET MODE

PROTOCOL

RESTORE FACTORY DEFAULTS

BACK

EXIT

NOTE: For American Dynamics controllers with only 32 presets, switch SW3-1

on the dome drive to the ON position. When SW3-1 is ON, preset

<EAB>

<PMAB>

XXX/-XXX

XXX.XXX

99 becomes 32

98 becomes 31

97 becomes 30

96 becomes 29

95 becomes 28

93 becomes 26

92 becomes 25

91 becomes 24

90 becomes 23

89 becomes 22

88 becomes 21

BACK

EXIT

<AUX>

<CLEAR>

REFERENCE INFORMATION

AZIMUTH

ELEVATION

LANGUAGE 1

LANGUAGE 2

LANGUAGE 3

LANGUAGE 4

LANGUAGE 5

LANGUAGE 6

ZOOM

BACK

EXIT

BACK

EXIT

BACK

EXIT

If the limit stops are turned off, presets 23-26 can be used as regular presets.

CAMERA

MOTION

POWER UP

LYNE SYNC

LINE SYNC

LINE SYNC PHASE

PRESETS

PATTERNS

ZONES

WINDOW BLANKING

STYLE

ALARMS

WIPER**

AUX

AUX 1 MODE

DWELL TIME (SECS)

CLEAR

PASSWORD

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

LIMIT STOPS

POWER UP ACTION

PRESET NUMBER

PATTERN NUMBER

ZONE NUMBER

ZONE NOT DEFINED

RESUME

WIPER CONTROL

WIPER MODE

WIPER DWELL (SECS)

WIPER TIME (MIN)

CLEAR ALL ZONES

CLEAR ALL PRESETS

CLEAR ALL PATTERNS

ENABLE PASSWORD

SEQUENCE (SECS)

RESET DELAY (SECS)

BACK

EXIT

PRESET NOT DEFINED

BLANK ALL ABOVE

BLANK ALL BELOW

ZOOM SPEED

BACK

EXIT

AUX 2 MODE

DWELL TIME (SECS)

CLEAR ALL WINDOW BLANKING

BACK

EXIT

LOW LIGHT LEVEL

IR CUT FILTER*

AUTO IR LEVEL*

<MOTION DETECTION>*

BACK

EXIT

ZONE ENABLED

ZONE BLANKING

RESTORE FACTORY DEFAULTS

BACK

EXIT

BACK

EXIT

REFERENCE INFORMATION

PATTERN USAGE

REMAINING

BACK

EXIT

BACK

EXIT

BACK

EXIT

BACK

EXIT

BACK

EXIT

BACK

EXIT

BACK

EXIT

ADVANCED SETTINGS

MOTION DETECTION*

SET WINDOWS

ALARM SETTINGS

ALARM NUMBER

SET WASHER SEQUENCE

PRESET NOT DEFINED

SHUTTER SPEED

AGC LIMIT

MOTION DETECTION ENABLED

WINDOW NUMBER

EDIT THE PASSWORD

- - - - - - - - - - - - - - - - -

1234567890 OK

AUTO IRIS

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

ACTIVATE AUX

AUX TIME

ABCDEFGHIJ

KLMNOPQRST

UZWXYZ.,-/

abcdefghij

CANCEL

ENABLE WINDOW

REVERSE

CLEAR WINDOW

ALARM CONTACT

SPACE

BACKSPACE

BACK

EXIT

WASHER TIME (SECS)

WIPER DELAY (SECS)

AUTO RETURN

BACK

EXIT

klmnopqrst

uvwxyz*;:

B GAIN

BACKLIGHT COMP

VIDEO LEVEL

BACK

EXIT

WIDE DYNAMIC RANGE*

BACK

EXIT

BACK

EXIT

EDIT DETECTION AREA*

DETECTION AREA 1

LOCATION

SENSITIVITY

DETECTION AREA 2

LOCATION

SENSITIVITY

DETECTION AREA 3

LOCATION

SENSITIVITY

DETECTION AREA 4

LOCATION

SENSITIVITY

BACK

EXIT

* Available only with the 23X day/night camera.

**Available only with wiper models.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Language

The language for the on-screen menus is selectable. Available languages include English, Spanish,

French, German, Italian, Portuguese, Polish, Russian, Turkish, and Czechoslovakian. The factory

default language is English.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

To change the display language:

1. Use the joystick to position the cursor beside LANGUAGE.

2. Press Iris Open. The cursor moves to the right, beside the current, selected language.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

3. Move the joystick up or down to view selections. Press Iris Open to enter selection.

All on-screen menus are changed to the selected language.

EXIT

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Unit Inversion

Unit inversion reconfigures the system so that it operates normally when it is installed in an inverted

postion. The following are the available settings for unit inversion.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

OFF (default)

Use for normal installations (refer to Figure 1).

Reconfigures the camera oriention and controller functions for inverted

operation when the unit is installed in an inverted position (refer to Figure 1).

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

STANDARD

INSTALLATION

INVERTED

INSTALLATION

Figure 1. Installation Methods

To reconfigure the unit for inverted operation and control:

1. Use the joystick to position the cursor beside UNIT INVERSION.

2. Press Iris Open. The cursor moves to the right.

3. Move the joystick up or down to view selections. Press Iris Open to enter selection. The system

will start a configuration sequence. When configuration is completed, the camera will be

oriented in the correct position for the installation.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

System Information

The system Information screen displays ExSite model, software version, available memory, and

other diagnostic information.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

System settings cannot be changed using this screen. This screen is for reference only.

Use the following steps to display the System Information screen:

1. Use the joystick to position the cursor beside SYSTEM INFORMATION.

2. Press Iris Open. The SYSTEM INFORMATION window opens.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

SYSTEM INFORMATION

UNIT MODEL

1PSXM31CBW

AVAILABLE

0.90.9013

8.00.9000

1.00

POWER MODULE MEMORY

SOFTWARE VERSION

BIOS VERSION

FONT VERSION

COMM

2400,N,8,1

D ADDRESS

P ADDRESS

CM9500 MODE

32 PRESETS

PROTOCOL

OFF

BACK

EXIT

ADDITIONAL

FREE MEMORY

LAST RESET

30464

0.00°

AZIMUTH ZERO OFFSET

MOTOR ACTIVE

CAMERA ACTIVE

FPGA VERSION

VIDEO LEVEL

CAMERA

YES

HIGH

XXXX-XXXX

<EAB>*

<PMAB>**

LANGUAGE 1

LANGUAGE 2

LANGUAGE 3

LANGUAGE 4

LANGUAGE 5

LANGUAGE 6

LANGUAGE 7

LANGUAGE 8

LANGUAGE 9

LANGUAGE 10

ENGLISH 1.00

ESPANOL 1.00

ITALIANO 1.00

DEUTSCH 1.00

PORTUGUES 1.00

FRANCAIS 1.00

CESKY 1.00

POLSKI 1.00

RUSSIAN 1.00

TURKISH 1.00

BACK

EXIT

*EAB (Enclosure Accessory Board): The EAB information screen displays availability, version, and

part number of the enclosure accessory board

**PMAB (Power Module Accessory Board): The PMAB information screen displays availability,

version, and part number of the power module accessory board.

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Setup

Display setup allows you to program how labels are displayed on the monitor. The following labels

are available:

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

UNIT INVERSION

OFF

PRESET LABEL

ZONE LABEL

ZOOM

Identifies preset.

Identifies zone.

Identifies the amount of magnification.

Amount of pan from 0° and the amount of tilt from 0° horizontal.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

AZIMUTH*/

ELEVATION**

EXIT

DIRECTION

Displays compass direction.

ALARM MESSAGE Displays activated alarm.

DISPLAY SETUP

A preset label is displayed when a preset is called. A zone label is displayed when the system

moves into a zone. The zoom ratio label is displayed when zoom is activated. Azimuth/elevation and

direction labels are displayed when pan/tilt is activated. An alarm message appears on the monitor

when an alarm occurs.

PRESET LABEL

ZONE LABEL

2 (SECS)

OFF

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

2 (SECS)

The following settings are available for each label:

RESTORE FACTORY DEFAULTS

OFF

Label is not displayed when activated.

BACK

EXIT

CONSTANT

2 SECONDS

5 SECONDS

10 SECONDS

The label is continually displayed when activated.

The label is displayed for 2 seconds after activation.

The label is displayed for 5 seconds after activation.

The label is displayed for 10 seconds after activation.

*Azimuth is the pan angle from 0 to 359 degrees.

**Elevation is the tilt position from +90 (horizon) to -90 degrees.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

LABEL POSITIONS

Labels can be placed anywhere on the monitor. This feature allows you to customize the appearance

of your monitor screen.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

The following labels are not set at fixed positions:

Preset Label

Zone Label

Alarm 1

Azimuth*/Elevation**: XXX°/-XX°

Zoom Ratio: XXX.XX

Direction: Compass direction is shown.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

To set a label position:

1. Use the joystick to position the cursor beside a label.

2. Press Iris Open.

3. Use the joystick to move the label up, down, left, and/or right.

4. Press Iris Open.

5. Repeat steps 1 through 4 to position other labels.

6. Position the cursor next to Save and Exit. Press Iris Open to save settings and exit menu.

DISPLAY SETUP

PRESET LABEL

ZONE LABEL

2 (SECS)

OFF

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

2 (SECS)

RESTORE FACTORY DEFAULTS

BACK

EXIT

[ZONE LABEL ------------]

[PRESET LABEL ------------]

[ALARM 1 ------------]

SAVE AND EXIT

CANCEL AND EXIT

HELP

XXX°/-XX° XXX.XX

*Azimuth is the pan angle from 0 to 359 degrees.

**Elevation is the tilt position from +90 (horizon) to -90 degrees.

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Unit Settings

CAMERA

TYPE OF LIGHTING

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

Pelco has calibrated settings that optimize the white balance, and the picture, for multiple lighting

conditions; settings differ depending upon the model.

There are two types of lighting settings for 22X models:

T1 (default)

For use in outdoor applications.

For use in indoor applications.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

There are three settings for 23X models:

EXIT

T1 (default)

For use in outdoor applications.

For use in indoor applications.

For use in applications that use sodium lighting.

UNIT SETTINGS

<ZONES>

AUTO FOCUS

Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.

There are two auto focus settings:

<WIPER>

ON (default)

If auto focus mode is set to ON, the camera will focus

automatically when using pan, tilt, and zoom functions.

<AUX>

<CLEAR>

Off

Focus is operated manually. To focus, press the Focus Far or Focus

Near button on the controller.

BACK

EXIT

ZOOM LIMIT

Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The following are

the zoom limit settings for the ExSite Series systems:

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

X184

23X Day/Night Camera

Camera zooms optically to 23X and then zooms electronically. 32X,

92X,184X, or 230X. Default setting is 184X.

ZOOM SPEED

MEDIUM

AUTO

DUSK

LOW LIGHT LIMIT

IR CUT FILTER*

AUTO IR LEVEL*

22X Color Camera

Camera zooms optically to 22X and then zooms electronically. 22X,

32X, 88X, 176X, 220X, or 264X. The default setting is 176X.

ZOOM SPEED

BACK

EXIT

Zoom speed allows the user to define how fast the dome will go from full wide zoom to the 23X

optical zoom. The default setting is MEDIUM.

*Available only with the 23X day/night camera.

Available settings for zoom speed include the following:

22X COLOR

2.4 seconds

3.9 seconds

6.3 seconds

23X DAY/NIGHT

2.9 seconds

4.2 seconds

5.8 seconds

HIGH

MEDIUM (default)

LOW

NOTE: When using the HIGH setting, the image may be out of focus until zooming stops.

LOW LIGHT LIMIT

Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will

remain open in low light conditions. The default setting is 2.

Settings include the following:

2 = 1/2 second

4 = 1/4 second

8 = 1/8 second

15 = 1/15 second

30 = 1/30 second

60 = 1/60 second

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

IR CUT FILTER (23X DAY/NIGHT CAMERA)

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

ExSite IPSXM has two modes of operation: color and black-white. You can increase sensitivity in low

light conditions by switching to black-white mode (removing the IR cut filter). Color mode is

preferred in normal lighting conditions.

UNIT INVERSION

The following are the settings for the IR cut filter:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

OFF

Manual operation is controlled by preset 88 (filter IN) and 89 (filter OUT).

Automatic operation is controlled by the Auto IR Level setting.

AUTO (default)

EXIT

Auto IR Level

UNIT SETTINGS

The auto IR level is the light level at which the infrared filter switches IN or OUT.

<ZONES>

<WIPER>

Following are the available settings for the Auto IR Level:

DUSK (default)

DARK

approximately 6 lux (black - white)

approximately 13 lux (color)

approximately 0.1 lux (black - white)

approximately 2 lux (color)

<AUX>

<CLEAR>

NOTES:

BACK

EXIT

•

If backlight compensation is ON and the IR cut filter switches OUT in normal lighting

conditions, adjust the Auto IR Level to a darker setting. Refer to the Backlight Compensation

section.

•

Low light does not mean no light. Some type of illumination is required (street light, IR light,

etc.). The camera is not sensitive to IR light when the IR cut filter is IN.

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

X184

ZOOM SPEED

MEDIUM

AUTO

DUSK

LOW LIGHT LIMIT

IR CUT FILTER*

AUTO IR LEVEL*

BACK

EXIT

*Available only with the 23X day/night camera.

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED CAMERA SETTINGS

SHUTTER SPEED

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

Shutter speed is the duration of the electronic shutter. Program shutter speed to operate

automatically (Auto) or manually (Numeric Value).

AUTO (default)

The electronic shutter speed is set automatically by the amount of light

sensed by the camera.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

NUMERIC VALUE

The system has several numerical shutter speed settings. The higher the

number, the faster the electronic shutter.

EXIT

The slowest shutter speed setting is 2 = 1/2 second

The fastest setting is 30,000 = 1/30,000 second

Increasing the shutter speed lowers the light sensitivity and reduces the

streaking of fast moving objects.

UNIT SETTINGS

<ZONES>

Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment. This will

eliminate any flicker that may occur in the picture.

<WIPER>

AGC LIMIT

<AUX>

AGC Limit allows users to adjust how the system balances AGC (automatic gain control) and

electronic shutter in low light conditions. As scene lighting decreases, the system will automatically

adjust, adding a mixture of AGC and slow shutter according to the AGC LIMIT setting. AGC LIMIT

can be set between 0 and 40, with 40 applying maximum AGC before slow shutter. In contrast,

setting AGC LIMIT to 0 will force the system software to apply maximum slow shutter (as defined by

the LOW LIGHT LIMIT setting) before any AGC is applied. The default setting of 28 sets the AGC and

slow shutter balance to favor AGC, yielding more real-time low light images.

<CLEAR>

BACK

EXIT

CAMERA

The maximum slow shutter that the system will achieve is 1/2 second shutter (refer to the Low Light

Limit section).

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

X184

ZOOM SPEED

MEDIUM

AUTO

DUSK

LOW LIGHT LIMIT

IR CUT FILTER*

AUTO IR LEVEL*

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED

AGC LIMIT

AUTO

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

B GAIN

146

294

BACKLIGHT COMP

VIDEO LEVEL

WIDE DYNAMIC RANGE*

OFF

HIGH

OFF

BACK

EXIT

*Available only with the 23X day/night camera.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

AUTO IRIS

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

Auto iris is the lens function that automatically opens and closes the iris in response to changing

light conditions.

UNIT INVERSION

Program the auto iris to operate automatically or at a user-defined level.

OFF

Auto iris is disabled, and control is always manual.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

AUTO (default)

The iris is adjusted automatically to produce a constant video output as deter-

mined by the Auto Iris Level setting.

EXIT

If auto iris is in the auto mode, it will remain that way until the iris is manually opened or closed. The

system will return to auto mode when it is panned or tilted more than 15 degrees.

UNIT SETTINGS

<ZONES>

<WIPER>

Auto Iris Level

Auto iris level is the numeric value the auto iris uses to maintain the brightness level of the camera.

Increase the value to brighten the scene. Decrease the level to darken the scene. This setting can be

adjusted if the video level in the auto iris mode is too bright or too dark.

If backlight compensation is ON, decrease the Auto Iris Level setting.

<AUX>

<CLEAR>

Auto Iris Peak

BACK

EXIT

Increasing the peak value will cause the auto iris circuit to react more to highlights or “peaks” in the

picture. Decreasing this value will cause it to use the average video level to adjust the iris.

AUTO SHARPNESS

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

X184

Auto sharpness enhances picture detail by increasing the aperture gain of the camera and

sharpening the edges in the picture.

ZOOM SPEED

MEDIUM

AUTO

DUSK

There are two settings:

LOW LIGHT LIMIT

IR CUT FILTER*

AUTO IR LEVEL*

ON (default)

OFF

The camera automatically maintains a normal sharpness mode.

The sharpness of the picture is set manually by programming the sharpness

level. Sharpness level settings range from 0-63.

BACK

EXIT

AUTO WHITE BALANCE

ADVANCED SETTINGS

SHUTTER SPEED

AGC LIMIT

AUTO

This feature automatically processes the viewed image to retain color balance over a color

temperature range. The default setting for auto white balance is ON.

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO

R GAIN

B GAIN

Adjusts the picture output in the red range. As you change the value, you will

see the color change on your monitor.

AUTO SHARPNESS

SHARPNESS LEVEL

Adjusts the picture output in the blue range. As you change the value, you will

see the color change on your monitor.

AUTO WHITE BALANCE

R GAIN

B GAIN

146

294

BACKLIGHT COMP

VIDEO LEVEL

WIDE DYNAMIC RANGE*

OFF

HIGH

OFF

BACK

EXIT

* Available only with the 23X day/night camera.

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

BACKLIGHT COMPENSATION (BLC)

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette.

Backlight compensation enhances objects in the center of the picture. The system uses the center of

the picture to adjust the iris. If there is a bright light source outside of this area, it will wash out to

white. The camera will adjust the iris so that the object in the sensitive area is properly exposed.

UNIT INVERSION

There are two backlight compensation settings:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

Backlight compensation is activated.

EXIT

OFF (default)

Backlight compensation is not activated.

If backlight compensation is ON, decrease the Auto Iris setting and adjust the Auto IR Level to a

darker setting. Refer to the Auto Iris and Auto IR Level sections.

UNIT SETTINGS

<ZONES>

VIDEO LEVEL

Set the video output to one of the following:

<WIPER>

NORMAL

1.0 volt peak-to-peak

<AUX>

<CLEAR>

HIGH (default setting) 1.2 volt peak-to-peak to compensate for losses in video cable.

BACK

EXIT

WIDE DYNAMIC RANGE (23X DAY/NIGHT CAMERA)

The wide dynamic range (WDR) setting balances the brightest and darkest sections of a scene to

produce a picture that is better balanced in lighting and provides more detail. The range from the

darkest to the brightest sections of the scene is 80X more when WDR is ON than when OFF.

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

X184

Available settings are OFF and ON. The default setting is OFF. When wide dynamic range is set to

ON the frame rate is reduced from the standard 30 frames per second to 15 frames per second.

ZOOM SPEED

MEDIUM

AUTO

DUSK

LOW LIGHT LIMIT

IR CUT FILTER*

AUTO IR LEVEL*

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED

AGC LIMIT

AUTO

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO

Wide Dynamic Range ON

Wide Dynamic Range OFF

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

B GAIN

146

294

BACKLIGHT COMP

VIDEO LEVEL

WIDE DYNAMIC RANGE*

OFF

HIGH

OFF

BACK

EXIT

* Available only with the 23X day/night camera.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

MOTION

PROPORTIONAL PAN

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the

amount of zoom. At telephoto zoom settings, the pan and tilt speeds will be slower for a given

amount of joystick deflection than at wide zoom settings. This keeps the image from moving too fast

on the monitor when there is a large amount of zoom.

There are two proportional pan modes:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

ON (default)

OFF

Enables the proportional pan mode.

EXIT

Disables proportional pan mode. The pan speed will not depend on the

amount of zoom.

UNIT SETTINGS

<ZONES>

<WIPER>

<AUX>

<CLEAR>

BACK

EXIT

MOTION

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

NONE

AUTO

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

PARK TIME

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

This feature allows the system to begin a specified operation (scan, preset, or pattern) after a

programmed time of inactivity.

UNIT INVERSION

Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables

this feature. The default setting is zero.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

Park Action

EXIT

This feature will define the activity when the system parks. The following settings are available:

NONE (default)

AUTO SCAN

RANDOM SCAN

FRAME SCAN

PRESET 1

No action.

The system starts auto scan operation.

The system starts random scan operation.

The system starts frame scan operation.

The system goes to preset 1.

The system goes to preset 8.

The system runs pattern 1.

UNIT SETTINGS

<ZONES>

<WIPER>

PRESET 8

<AUX>

<CLEAR>

PATTERN 1

PATTERN 2

PATTERN 3

PATTERN 4

The system runs pattern 2.

BACK

EXIT

The system runs pattern 3.

The system runs pattern 4.

MOTION

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

NONE

AUTO

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

SCAN SPEED

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

Scan speed is the degrees per second that the system will pan when in scan mode. Scan speed is

adjustable from 1 to 40 degrees per second through the programming menu. The default setting is

25 degrees per second.

UNIT INVERSION

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

PRESET FREEZE FRAME

This feature freezes the scene on the monitor when going to a preset. This allows for smooth

transition from one preset scene to another. Preset freeze frame also reduces bandwidth when used

with digital network systems such as PelcoNet^™and guarantees that blanked areas will not be

revealed when going to a preset.

EXIT

UNIT SETTINGS

There are three preset freeze frame settings:

<ZONES>

The image on the screen freezes when a preset is called. When the system

reaches the preset, the image is unfrozen and the preset scene is displayed.

OFF

The image is never frozen.

<WIPER>

AUTO (default)

Freeze frame is turned on automatically if window blanking is ON. If window

blanking is OFF, freeze frame is off.

<AUX>

<CLEAR>

BACK

EXIT

MOTION

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

NONE

AUTO

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMIT STOPS

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

Limit stops are programmable stops that limit the pan range of the unit. There must be two limits, a

left and a right, to define an area.

UNIT INVERSION

There are two types of limit stops:

MANUAL

SCAN

A manual (joystick) pan operation stops when a limit stop is reached.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

The system reverses direction during random, frame, or auto scanning when a

limit stop is reached.

EXIT

To set manual or scan stops:

1. Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS.

2. Press Iris Open.

3. Follow the directions displayed on the monitor.

UNIT SETTINGS

<ZONES>

NOTE: In order for the manual or scan stops to work, the LIMIT STOPS setting must be ON.

To clear manual or scan stops:

<WIPER>

1. Use the joystick to position the cursor beside CLEAR MANUAL STOPS or CLEAR SCAN STOPS.

2. Press Iris Open.

3. Follow the directions displayed on the monitor.

<AUX>

<CLEAR>

BACK

EXIT

MOTION

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

NONE

AUTO

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

AZIMUTH ZERO

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

Azimuth is the pan angle from 0 to 359 degrees. Azimuth zero is the pan position you specify to be

the 0-degree point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass

readings are based on the set Azimuth Zero point.

UNIT INVERSION

To program azimuth zero:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

1. Use the joystick to position the cursor beside SET AZIMUTH ZERO.

2. Press Iris Open.

EXIT

3. Follow the directions displayed on the monitor.

To clear azimuth zero:

1. Use the joystick to position the cursor beside CLEAR AZIMUTH ZERO.

2. Press Iris Open.

3. Follow the directions displayed on the monitor.

UNIT SETTINGS

<ZONES>

<WIPER>

<AUX>

<CLEAR>

BACK

EXIT

MOTION

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

NONE

AUTO

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

POWER UP

POWER UP ACTION

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power

to the system is cycled.

The following settings are available:

NONE

No action.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

AUTO (DEFAULT)

AUTO SCAN

RANDOM SCAN

FRAME SCAN

PRESET 1

The system resumes its prior activity or direction before the power outage.

The system starts auto scan operation.

The system starts random scan operation.

The system frame scan operation.

The system to preset 1.

EXIT

UNIT SETTINGS

<ZONES>

<WIPER>

PRESET 8

The system to preset 8.

PATTERN 1

PATTERN 2

PATTERN 3

PATTERN 4

The system pattern 1.

The system pattern 2.

<AUX>

<CLEAR>

The system pattern 3.

BACK

EXIT

The system pattern 4.

POWER UP

POWER UP ACTION

AUTO

BACK

EXIT

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

LINE SYNC

Line sync refers to a programmable function that allows you to synchronize all cameras within a

PELCO EXSITE IPSXM

matrix system.

LANGUAGE

UNIT INVERSION

ENGLISH

OFF

NOTE: ExSite IPSXM automatically senses V-Sync input. No line sync setup is required for Pelco

control systems that provide a V-Sync signal.

For matrix systems that do not output V-Sync, there are two settings for line synchronization:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

ON (default)

OFF

Adjusts the phase of the line sync to synchronize input power. LINE SYNC

PHASE settings range from 0-359 degrees.

EXIT

The system synchronizes to an internal clock.

UNIT SETTINGS

<ZONES>

<WIPER>

<AUX>

<CLEAR>

BACK

EXIT

LINE SYNC

LINE SYNC PHASE

BACK

EXIT

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

PRESETS

The ExSite IPSXM system has 80 programmable preset positions. Each preset can be programmed to

PELCO EXSITE IPSXM

use pan, tilt, all programmable camera settings, and motion detection.

LANGUAGE

UNIT INVERSION

ENGLISH

OFF

The presets are numbered 1-32 and 35-82. Presets 33 and 34 are fixed commands that cannot be

programmed. Preset 33 is disabled in the ExSite IPSXM. Preset 34 is the “pan zero” command, which

will direct the unit to the factory-determined zero reference point.

Use the following steps to program a preset.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

1. Select the preset number:

a. Use the joystick to position the cursor beside PRESET NUMBER. Press Iris Open. The

cursor moves to the right.

EXIT

b. Move the joystick up or down to view selections. Press Iris Open to enter selection.

2. Edit the preset label:

UNIT SETTINGS

a. Use the joystick to position the cursor beside EDIT PRESET LABEL.

b. Press Iris Open. The following appears on the monitor:

<ZONES>

<WIPER>

LABEL FOR PRESET

^{PRESET NUMBER}------

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij

CANCEL

SPACE

BACKSPACE

<AUX>

<CLEAR>

klmnopqrst

uvwxyz*;:

BACK

EXIT

c. Use the joystick to position the cursor beside a character. Press Iris Open to enter the

selection. To clear a character, position the cursor beside BACKSPACE, and then press Iris

Open.

d. When the label is completed, move the cursor to OK. Press Iris Open to return to the

Preset menu.

PRESETS

PRESET NUMBER

***PRESET NOT DEFINED***

3. Edit the preset scene:

<MOTION DETECTION>*

a. Use the joystick to position the cursor beside EDIT PRESET SCENE.

b. Press Iris Open.

c. Follow the directions displayed on the monitor.

4. Edit preset camera settings:

a. Use the joystick to position the cursor beside EDIT CAMERA SETTINGS.

b. Press Iris Open. The EDIT CAMERA SETTINGS window appears on the monitor. Refer to

the Camera and Advanced Camera Settings sections of this manual to change preset

camera settings.

BACK

EXIT

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM

NOTES:

CUSTOM CAMERA SETTINGS

•

There are two additional options available for the IR Cut Filter that are only available when

programming a preset. The additional settings are YES and NO. If the IR Cut Filter is set to YES,

the preset scene will be in color. If the IR Cut Filter is set to NO, the preset scene will be in

black and white.

* Available only with the 23X day/night camera.

•

You can copy camera settings from one preset to another preset. To copy camera settings do

the following:

1) Use the joystick to position the cursor beside COPY CAMERA SETTINGS.

2) Press Iris Open. The cursor moves to the right.

3) Move the joystick up or down to view selections. Press Iris Open to enter selection.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

ENABLE MOTION DETECTION (23X DAY/NIGHT CAMERA)

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

The following are the settings for MOTION DETECTION ENABLED:

UNIT INVERSION

OFF (default)

Motion detection is turned off (disabled).

Motion detection is turned on (enabled).

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

NOTE: Motion detection does not work if the shutter speed is set at less than 1/60 of a second.

EXIT

EDIT DETECTION AREAS (23X DAY/NIGHT CAMERA)

Four motion detection areas can be defined for a preset. Use the following steps to edit motion

detection areas.

UNIT SETTINGS

<ZONES>

1. Edit detection areas 1, 2, 3, or 4:

a. Use the joystick to position the cursor beside EDIT DETECTION AREAS.

b. Press Iris Open. The EDIT DETECTION AREAS programming window appears on the monitor.

c. Use the joystick to position the cursor beside LOCATION for DETECTION AREA 1, 2, 3, or 4.

d. Press Iris Open. The cursor moves to the right next to the number 0.

e. Move the joystick up. A blue rectangle appears in the upper left-hand corner of the screen.

f. Use the joystick to place the blue rectangle over the desired detection area.

g. Press Iris Open to make a selection.

<WIPER>

<AUX>

<CLEAR>

BACK

EXIT

NOTE: Motion detection is not guaranteed to catch 100% of activity.

MOTION DETECTION AREAS

PRESETS

PRESET NUMBER

***PRESET NOT DEFINED***

<MOTION DETECTION>*

BACK

EXIT

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM

CUSTOM CAMERA SETTINGS

2. Set the sensitivity of the motion detection area:

EDIT DETECTION AREAS*

DETECTION AREA 1

a. Position the cursor next to SENSITIVITY for DETECTION

LOCATION

AREA 1, 2, 3, or 4.

SENSITIVITY

MEDIUM

MOTION DETECTION*

DETECTION AREA 2

LOCATION

SENSITIVITY

DETECTION AREA 3

LOCATION

SENSITIVITY

b. Press Iris Open, the cursor moves to the right.

c. Use the joystick to select one of the following sensitivity

levels:

MOTION DETECTION ENABLED

OFF

MEDIUM

ACTIVATE AUX

AUX TIME (SECS)

OFF

MEDIUM

DETECTION AREA 4

LOCATION

HIGH

The sensitivity level is high. Slight

changes in light level and contrast

are detectable.

SENSITIVITY

BACK

EXIT

MEDIUM

BACK

EXIT

MEDIUM (default) Average sensitivity.

LOW

The sensitivity level is low.

* Available only with the 23X day/night camera.

d. Press Iris Open to make selection.

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

ACTIVATE AUX COMMAND (23X DAY/NIGHT CAMERA)

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

Motion detection can be programmed to trigger an auxiliary command when motion is detected. The

following are the settings for ACTIVATE AUX:

UNIT INVERSION

OFF (default)

Motion detection will not trigger an AUX command.

Triggers a command to AUX 1.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

Triggers a command to AUX 2.

EXIT

AUX TIME (23X DAY/NIGHT CAMERA)

UNIT SETTINGS

Aux time is the length of time the auxiliary will remain on after motion is detected. Available

settings for AUX TIME are 1 through 60 seconds.

<ZONES>

<WIPER>

<AUX>

<CLEAR>

BACK

EXIT

PRESETS

PRESET NUMBER

***PRESET NOT DEFINED***

<MOTION DETECTION>*

BACK

EXIT

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM

CUSTOM CAMERA SETTINGS

MOTION DETECTION*

MOTION DETECTION ENABLED

OFF

ACTIVATE AUX

AUX TIME (SECS)

OFF

BACK

EXIT

* Available only with the 23X day/night camera.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

PATTERNS

A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be

recalled with a command from a controller or automatically by a programmed function (alarm, park

or power-up).

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

The ExSite IPSXM can handle up to four user-defined patterns. Pattern length is based upon memory

usage rather than a fixed amount of time. The complexity of a pattern will determine the amount of

storage available to program other patterns.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

To program a pattern:

1. Use the joystick to position the cursor beside PATTERN NUMBER. Press Iris Open. The cursor

moves to the right.

EXIT

2. Move the joystick up or down to view selections. Press Iris Open to enter selection.

3. Use the joystick to position the cursor beside PROGRAM PATTERN.

4. Press Iris Open. The Patterns programming window appears on the monitor.

5. Follow the directions displayed on the monitor.

UNIT SETTINGS

<ZONES>

After a pattern is programmed, the remaining storage percentage is displayed on the screen. This is

the amount of memory available to program the remaining patterns.

To clear a pattern:

<WIPER>

1. Use the joystick to position the cursor beside CLEAR PATTERN.

2. Press Iris Open.

3. Follow the directions displayed on the monitor.

<AUX>

<CLEAR>

BACK

EXIT

NOTES:

•

When programming one or more presets within a pattern use the normal controller commands

to Call a Preset.

•

Not all controllers can start all four patterns. However, any of the four patterns can be

automatically started with park, power-up, and alarm functions.

PATTERNS

PATTERN NUMBER

BACK

EXIT

REFERENCE INFORMATION

PATTERN USAGE

REMAINING

100%

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

ZONES

A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The IPSXM

positioning system is capable of eight zones, each with a 20-character label.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

To program a zone:

1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the cursor moves

to the right.

2. Move the joystick up or down to view selections. Press Iris Open to enter selection.

3. Use the joystick to position the cursor beside EDIT ZONE.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

4. Press Iris Open. The Zone programming window appears on the monitor.

EXIT

5. Follow the directions displayed on the monitor. After the left and right limit stops are set, the

Zones menu reappears with the ZONE ENABLED option set to YES.

To edit a zone label:

UNIT SETTINGS

<ZONES>

<WIPER>

1. Use the joystick to position the cursor beside EDIT ZONE LABEL.

2. Press Iris Open. The following appears on the monitor:

LABEL FOR PRESET

^{PRESET NUMBER}------

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij

CANCEL

<AUX>

<CLEAR>

SPACE

BACKSPACE

klmnopqrst

uvwxyz*;:

BACK

EXIT

3. Use the joystick to position the cursor beside a character. Press Iris Open to enter selection.

To clear a character, position the cursor beside BACKSPACE, and then press Iris Open.

ZONES

4. When the label is completed, move the cursor to OK. Press Iris Open to return to the Zones

menu.

ZONE NUMBER

***ZONE NOT DEFINED***

To disable a zone (a zone is enabled automatically when it is programmed) or to blank a zone:

ZONE ENABLED

ZONE BLANKING

1. Move the cursor beside ZONE ENABLED or ZONE BLANKING.

2. Press Iris Open. The cursor moves to the right.

3. Move the joystick up or down to view selections. Press Iris Open to enter selection.

OFF

BACK

EXIT

To clear a zone:

1. Use the joystick to position the cursor beside CLEAR ZONE.

2. Press Iris Open. Follow the instructions on the screen.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

WINDOW BLANKING

Window blanking allows a user to program up to eight, four-sided, user-defined areas that cannot be

viewed by the operator of the system. A blanked area will move with pan and tilt functions and

automatically adjust in size as the lens zooms telephoto and wide.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

ExSite IPSXM has two style modes for window blanking, GRAY and SMEAR. If style is set to gray,

the blanked area is covered with a solid gray window. If smear is selected images behind the

window will be noticeable but not distinguishable.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

To set a window blanking area:

1. Use the joystick to position the cursor beside WINDOW BLANKING. Press Iris Open. The

WINDOW BLANKING menu appears on the screen.

EXIT

2. Move the joystick to position the cursor beside SET WINDOWS. Press Iris Open to enter.

3. Position the cursor beside WINDOW NUMBER. Press Iris Open. The cursor moves to the right.

4. Move the joystick up or down to view selections. Press Iris Open to enter selection.

UNIT SETTINGS

<ZONES>

5. Use the joystick to position the cursor beside EDIT WINDOW LOCATION. Press Iris Open, and

then follow the instructions that appear on the screen.

NOTE: Use the inside corner of the window selection tool as a

guide when selecting the upper left, upper right, bottom right,

and bottom left corners of the window.

<WIPER>

INSIDE CORNER

<AUX>

<CLEAR>

Set windows are not visible when editing a new window

location.

BACK

EXIT

When all four corners are set, the SET WINDOWS menu reappears, the blanked area is displayed,

and the ENABLE WINDOW option is set to YES.

6. The blanked area can be programmed to turn on or off at a specified zoom point. To set the

zoom point:

WINDOW BLANKING

a. Use the joystick to position the cursor beside EDIT WINDOW ZOOM, and then press

STYLE

GRAY

Iris Open.

b. Zoom in to the point where you want window blanking to turn on. Press Iris Open to set

the zoom point.

BLANK ALL ABOVE

BLANK ALL BELOW

OFF

NOTES:

•

Since the area is already blanked out, it may be difficult to determine when you want window

blanking to turn on. Reverse the window before setting the zoom point. When finished reverse

the window again to blank out the area.

BACK

EXIT

•

Increase the size of the window if any part of the blanked area is revealed during pan, tilt, and

zoom operations.

SET WINDOWS

WINDOW NUMBER

ENABLE WINDOW

REVERSE

CLEAR WINDOW

BACK

EXIT

Window Blanking Disabled

Window Blanking Enabled

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

REVERSE

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

A blanked out area can be reversed to make it visible and the areas on both sides of it not visible.

The areas above and below the blanking area remain visible. Reversing the window a second time

will return it to its original condition.

UNIT INVERSION

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

CLEAR WINDOW

All areas that have been set for window blanking are cleared.

EXIT

BLANK ALL ABOVE/BLANK ALL BELOW

Blank All Above and Blank All Below add additional flexibility to setting up privacy areas. These

settings are ideal for applications where a complete pan location needs to be blanked.

UNIT SETTINGS

<ZONES>

Blank All Above

Blanks everything above a user-defined tilt angle. A blanked band

will appear at the top of the screen. The following settings are

available:

<WIPER>

OFF (default) No blanking

<AUX>

<CLEAR>

10 Blanks area from 10° above horizon to 90° above horizon

20 Blanks area from 20° above horizon to 90° above horizon

30 Blanks area from 30° above horizon to 90° above horizon

BACK

EXIT

CAMERA

HORIZON

40 Blanks area from 40° above horizon to 90° above horizon

50 Blanks area from 50° above horizon to 90° above horizon

60 Blanks area from 60° above horizon to 90° above horizon

70 Blanks area from 70° above horizon to 90° above horizon

80 Blanks area from 80° above horizon to 90° above horizon

0 Blanks area from -2° below horizon to 90° above horizon

-10 Blanks area from -10° below horizon to 90° above horizon

-20 Blanks area from -20° below horizon to 90° above horizon

-30 Blanks area from -30° below horizon to 90° above horizon

-40 Blanks area from -40° below horizon to 90° above horizon

-50 Blanks area from -50° below horizon to 90° above horizon

-60 Blanks area from -60° below horizon to 90° above horizon

-70 Blanks area from -70° below horizon to 90° above horizon

-80 Blanks area from -80° below horizon to 90° above horizon

WINDOW BLANKING

STYLE

GRAY

BLANK ALL ABOVE

BLANK ALL BELOW

OFF

BACK

EXIT

Blank All Below

Blanks everything below a user-defined tilt angle. A blanked circle

will appear below the specified angle. The following settings are

available:

SET WINDOWS

WINDOW NUMBER

OFF (default) No blanking

10 Blanks area from 10° above horizon to 92° below horizon

20 Blanks area from 20° above horizon to 92° below horizon

30 Blanks area from 30° above horizon to 92° below horizon

40 Blanks area from 40° above horizon to 92° below horizon

50 Blanks area from 50° above horizon to 92° below horizon

60 Blanks area from 60° above horizon to 92° below horizon

70 Blanks area from 70° above horizon to 92° below horizon

80 Blanks area from 80° above horizon to 92° below horizon

0 Blanks area from 2° below horizon 92° below horizon

-10 Blanks area from 10° below horizon to 92° below horizon

-20 Blanks area from 20° below horizon to 92° below horizon

-30 Blanks area from 30° below horizon to 92° below horizon

-40 Blanks area from 40° below horizon to 92° below horizon

-50 Blanks area from 50° below horizon to 92° below horizon

-60 Blanks area from 60° below horizon to 92° below horizon

-70 Blanks area from 70° below horizon to 92° below horizon

-80 Blanks area from 80° below horizon to 92° below horizon

ENABLE WINDOW

REVERSE

CLEAR WINDOW

BACK

EXIT

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

ALARMS

The ExSite IPSXM system has seven alarm inputs, which can be programmed as high, medium or

low priority. When an alarm is received, an input signal to the unit triggers the user-defined action

(go to preset, run pattern, etc.) programmed for the alarm.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

There are three global alarm settings:

RESUME

This mode lets the system resume its previous activity (scan, pattern, or

previous position) after all alarms are cleared.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

SEQUENCE

RESET DELAY

This is the time the system will perform an alarm activity when more than one

alarm of the same priority occurs at the same time.

EXIT

This is the amount of time the system considers the alarm to be active after it

has physically cleared.

UNIT SETTINGS

Use the following steps to program alarm settings.

<ZONES>

<WIPER>

1. Use the joystick to position the cursor beside ALARM SETTINGS. Press Iris Open.

2. Select the alarm number:

a. Use the joystick to position the cursor beside ALARM NUMBER.

b. Press Iris Open. The cursor moves to the right.

c. Move the joystick up or down to view selections. Press Iris Open to enter selection.

<AUX>

<CLEAR>

BACK

EXIT

ALARMS

RESUME

SEQUENCE (SECS)

RESET DELAY (SECS)

OFF

BACK

EXIT

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Select the alarm priority:

PELCO EXSITE IPSXM

a. Use the joystick to position the cursor beside ALARM PRIORITY.

b. Press Iris Open. The cursor moves to the right.

LANGUAGE

UNIT INVERSION

ENGLISH

OFF

c. Move the joystick up or down to view the available selections. Available settings include

HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities are active

at the same time, the dome will only go to the alarms with the highest priority.

d. Press Iris Open to enter selection.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

HIGH

Alarm action takes highest priority and will override manual pan,

tilt, and zoom control.

EXIT

MEDIUM/LOW

Alarm action will not occur if an alarm occurs during manual pan,

tilt, and zoom control.

UNIT SETTINGS

4. Set the alarm action:

<ZONES>

<WIPER>

a. Use the joystick to position the cursor beside ALARM ACTION.

b. Press Iris Open. The cursor moves to the right.

c. Move the joystick up or down to view the available selections. The following are the

settings for alarm action:

NONE

No action when alarm is triggered.

<AUX>

<CLEAR>

PRESET

The system goes to the preset that is the same as the alarm

number. Preset 1 will go to Alarm 1.

BACK

EXIT

PATTERN 1

The system runs pattern 1 when alarm is triggered.

PATTERN 2

The system runs pattern 2 when alarm is triggered.

ALARMS

PATTERN 3

The system runs pattern 3 when alarm is triggered.

RESUME

OFF

SEQUENCE (SECS)

RESET DELAY (SECS)

PATTERN 4

The system runs pattern 4 when alarm is triggered.

AUTO SCAN

RANDOM SCAN

FRAME SCAN

The system starts auto scan operation when alarm is triggered.

The system starts random scan operation when alarm is triggered.

The system starts frame scan operation when alarm is triggered.

BACK

EXIT

d. Press Iris Open to enter selection.

ALARM SETTINGS

ALARM NUMBER

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

LOW

NONE

ALARM CONTACT

OFF

BACK

EXIT

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Set the auxiliary to activate:

PELCO EXSITE IPSXM

a. Use the joystick to position the cursor beside ACTIVATE AUX.

b. Press Iris Open. The cursor moves to the right.

LANGUAGE

UNIT INVERSION

ENGLISH

OFF

c. Move the joystick up or down to view the following available selections.

NO (default)

Not activated.

An alarm action will activate AUX 1.

An alarm action will activate AUX 2.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

d. Press Iris Open to enter selection.

NOTE: The AUX 1/AUX2 will stop when all the alarms assigned to it have cleared. If the AUX1/AUX

is set up as momentary, then it will be activated each time a new alarm is activated.

UNIT SETTINGS

<ZONES>

6. Set the alarm contact:

a. Use the joystick to position the cursor beside ALARM CONTACT.

b. Press Iris Open. The cursor moves to the right.

c. Move the joystick up or down to view the following available selections.

<WIPER>

OFF (default)

N/O

Disabled

<AUX>

<CLEAR>

Normally open

Normally closed

N/C

BACK

EXIT

d. Press Iris Open to enter selection.

ALARMS

RESUME

SEQUENCE (SECS)

RESET DELAY (SECS)

OFF

BACK

EXIT

ALARM SETTINGS

ALARM NUMBER

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

LOW

NONE

ALARM CONTACT

OFF

BACK

EXIT

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

WIPER

The following IPSXM unit models feature a window wiper to clear moisture from the window of the

enclosure:

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

IPSXM31C22-2

IPSXM31C22-2X

IPSXM31C22-7

IPSXM31C22-7X

UNIT INVERSION

IPSXM31CBW23-2 IPSXM31CBW23-2X

IPSXM31CBW23-7 IPSXM31CBW23-7X

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

NOTE: The Wiper menu is available only on the above models. To check the unit model, refer to the

System Information section of this manual.

EXIT

WIPER CONTROL

This feature programs the on/off control for the wiper. There are two available settings for wiper

control, AUX 1 and Preset 86. If the wiper control is programmed for AUX 1, the wiper will operate

when AUX 1 is accessed. If the wiper control is set to Preset 86, selecting preset 86 on your

controller will turn the wiper on/off.

UNIT SETTINGS

<ZONES>

WIPER MODE

<WIPER>

Wiper mode determines how the wiper will act after the wiper control is turned on/off. There are

two modes of operation for wiper mode, momentary and continuous.

<AUX>

<CLEAR>

MOMENTARY

(default)

Programs the wiper to move across the enclosure window once and then back

to its starting position.

BACK

EXIT

CONTINUOUS

Programs the wiper to operate continually after the wiper is turned on. The

wiper will continue to operate until the wiper control (AUX 1 or preset 86) is

pressed again or until the programmed wiper time is completed.

WIPER*

WIPER CONTROL

WIPER MODE

WIPER DWELL (SECS)

WIPER TIME (MINS)

AUX 1

CONTINUOUS

WIPER DWELL

The wiper can be programmed to wipe the enclosure window every 1 to 30 seconds. This setting

only works when the wiper is programmed for continuous mode. The dwell time can be programmed

from 1 to 30 seconds.

BACK

EXIT

WIPER TIME

Wiper time programs how long the wiper will be on before it automatically shuts off. This setting

only works when the wiper is programmed for continuous mode. Wiper time can be programmed

from 1 to 1,440 minutes (1 minute to 24 hours).

*Available only with the wiper models.

NOTE: CM9700 Matrix Systems Only – For the wiper to operate in continuous mode, the camera’s

AUX 1 relay function must be set to latching in the CM9700-MGR. If the AUX 1 camera file is not

latching, the wiper will operate only in momentary mode, even if the system wiper is programmed

for continuous operation. Refer to the CM9700-MGR Software Guide for instructions.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

SET WASHER SEQUENCE

An external washer (not supplied by Pelco) can be used to wash the window of the enclosure.

Accessing AUX 3 or selecting Preset 87 will start the washer sequence.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

Use the following steps to program the washer sequence.

1. Use the joystick to position the cursor beside WIPER and then press Iris Open. The wiper menu

appears on the monitor.

2. Position the cursor beside SET WASHER SEQUENCE and then press Iris Open.

3. Edit the preset label:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

a. Use the joystick to position the cursor beside EDIT PRESET LABEL.

b. Press Iris Open. The following appears on the monitor:

LABEL FOR PRESET WASH

WASH - - - - - - - - - - - -

UNIT SETTINGS

<ZONES>

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij

klmnopqrst

uvwxyz#&:”

CANCEL

SPACE

BACKSPACE

<WIPER>

<AUX>

<CLEAR>

c. Use the joystick to position the cursor beside a character. Press Iris Open to enter

selection. To clear a character, position the cursor beside BACKSPACE, and then press Iris

Open.

BACK

EXIT

d. When the label is completed, move the cursor to OK. Press Iris Open to return to the Set

Washer Sequence menu.

WIPER*

4. Edit the preset scene:

WIPER CONTROL

WIPER MODE

WIPER DWELL (SECS)

WIPER TIME (MINS)

AUX 1

a. Use the joystick to position the cursor beside EDIT PRESET SCENE.

b. Press Iris Open.

c. Follow the directions displayed on the monitor.

CONTINUOUS

5. Edit preset camera settings:

BACK

EXIT

a. Use the joystick to position the cursor beside EDIT CAMERA SETTINGS.

b. Press Iris Open. The EDIT CAMERA SETTINGS window appears on the monitor. Refer to

the Camera and Advanced Camera Settings sections of this manual to change camera

settings

6. Set the washer time. The washer time programs how long the wiper will be on before it

automatically shuts off. Washer time can be programmed from 4 to 60 seconds.

SET WASHER SEQUENCE*

* * * PRESET NOT DEFINED * * *

7. Program the wiper delay. Wiper delay programs when the wiper will start after the washer

sequence has started. Wiper delay can be programmed from 1 to 30 seconds.

8. Program the Auto Return to ON or OFF. If the auto return is set to ON the unit will return to the

last operation before the system started the washer sequence. If it is set to OFF, the system

will remain at the preset scene for the washer sequence.

WASHER TIME (SECS)

WIPER DELAY (SECS)

AUTO RETURN

BACK

EXIT

REFERENCE INFORMATION

AZIMUTH

ELEVATION

- -

ZOOM

CUSTOM CAMERA SETTINGS

Quick Programming Guide

*Available only with the wiper models.

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

AUX

An auxiliary output is a programmable signal from the system that can trigger another device to

operate. An auxiliary output is programmable to trigger from an alarm or from a controller.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

An AUX 1 command from the controller will activate the relay in the system and operate the device

that is connected to the relay. The output of AUX 1 can be connected to the alarm input of a system

switch to activate automatic monitor switching and recording.

An AUX 2 command from the controller will place a ground at the output of AUX 2 to operate the

device that is connected to it.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

The following are the available AUX MODE settings:

EXIT

TOGGLE (default)

LATCHING

Changes the state of the auxiliary output every time an AUX command is

received from the controller.

Must receive an AUX ON/AUX OFF command from the controller to turn the

auxiliary output on/off.

UNIT SETTINGS

<ZONES>

MOMENTARY

An AUX ON command from the controller turns the auxiliary output on for the

programmed DWELL TIME. The auxiliary output will automatically turn off

when the dwell time is finished.

<WIPER>

<AUX>

<CLEAR>

BACK

EXIT

AUX

AUX 1 MODE

DWELL TIME (SECS)

TOGGLE

AUX 2 MODE

DWELL TIME (SECS)

TOGGLE

BACK

EXIT

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

CLEAR

Use this setting to clear user-defined settings or return the system to factory default settings.

PELCO EXSITE IPSXM

The following are the available CLEAR settings:

LANGUAGE

UNIT INVERSION

ENGLISH

OFF

ALL ZONES

Clears all zones. To clear a single zone, refer to the Zones section.

ALL PRESETS

ALL PATTERNS

Clears all presets. To clear a single preset, refer to the Presets section.

Clears all patterns. To clear a single patterns, refer to the Patterns section.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

ALL WINDOW

BLANKING

Clears all blanked windows. To clear a single blanked window, refer to the

Window Blanking section.

EXIT

RESTORE FACTORY Restores all camera settings to factory default settings.

DEFAULTS

UNIT SETTINGS

<ZONES>

<WIPER>

<AUX>

<CLEAR>

BACK

EXIT

CLEAR

CLEAR ALL ZONES

CLEAR ALL PRESETS

CLEAR ALL PATTERNS

CLEAR ALL WINDOW BLANKING

RESTORE FACTORY DEFAULTS

BACK

EXIT

Quick Programming Guide

(See Page 9)

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

PASSWORD

ExSite IPSXM features password protection to prevent unauthorized changes to the system settings.

An operator can open the System Information and Display Setup Screens, but cannot access any of

the Unit Settings menus.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

Controller/keyboard commands cannot override password-protected settings. If a keyboard is used

to set a preset, pattern, or zone, the Enter Password screen appears on the monitor. The password

must be entered before programming can continue.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

At least one character must be entered to create a valid password.

EXIT

UNIT SETTINGS

<ZONES>

<WIPER>

<AUX>

<CLEAR>

BACK

EXIT

PASSWORD

ENABLE PASSWORD

OFF

BACK

EDIT THE PASSWORD

- - - - - - - - - - - -

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij

CANCEL

SPACE

BACKSPACE

klmnopqrst

uvwxyz#&:”

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Position Calibration

Position calibration sets the preset reference point for all automatic positioning system movements.

Before programming presets, patterns, zones, labels, and window blanking, program and document

the position calibration point. The purpose of the calibration point is to restore all programmed

settings quickly in the event the unit is replaced or refurbished.

PELCO EXSITE IPSXM

LANGUAGE

ENGLISH

OFF

UNIT INVERSION

The position calibration point should be an easily identifiable point of reference. Best practice

suggests it be associated with a prominent landmark in the most common preset position.

To program the calibration preset:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

1. Use the joystick to position the cursor beside POSITION CALIBRATION.

2. Press Iris Open. The Position Calibration menu appears on the monitor.

3. Use the joystick to position the cursor beside EDIT PRESET SCENE.

4. Press Iris Open.

EXIT

5. Follow the directions displayed on the monitor.

POSITION CALIBRATION

*** PRESET NOT DEFINED ***

Once the calibration preset is programmed, the system should not have to be recalibrated unless the

unit is serviced or moved.

To recalculate the calibration preset:

BACK

EXIT

1. Use the joystick to position the cursor beside POSITION CALIBRATION.

2. Press Iris Open. The Position Calibration menu appears on the monitor.

3. Use the joystick to position the cursor beside RECAL USING CAL PRESET.

4. Press Iris Open.

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM

5. Follow the directions displayed on the monitor.

To clear the calibration preset:

1. Use the joystick to position the cursor beside POSITION CALIBRATION.

2. Press Iris Open. The Position Calibration menu appears on the monitor.

3. Use the joystick to position the cursor beside CLEAR CALIBRATION PRESET.

4. Press Iris Open.

5. Follow the directions displayed on the monitor.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Reset, Cycle Power, Reboot

RESET CAMERA

PELCO EXSITE IPSXM

LANGUAGE

UNIT INVERSION

ENGLISH

OFF

Use this function to reset all camera settings to factory default parameters.

NOTE: Reset camera restores all camera settings, except those associated with presets.

CYCLE CAMERA POWER

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

If the camera is not operating or if you lose camera control, cycle camera power. Cycling camera

power resets the camera but does not change any saved camera settings.

EXIT

REBOOT SYSTEM

Reboot the system if it is not operating if there is no control, or if the position of the unit has been

compromised. Rebooting the system will cycle pan and tilt and camera power without changing

programmed settings.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Software/Language File Upload

The ExSite IPSXM system allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco

field service tool is required to perform these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK), remote data port

box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).

For instructions on how to upload revised operating software and language files refer to the installation/operation manual supplied with

the field service tool.

Perform software uploads only when necessary. Software uploads do not need to be performed if the system is operating properly.

UPLOAD ICON

During a software/language file upload, an icon will appear on the monitor to indicate data is being transferred to the system (refer to the

figure below). The default setting for data transmission is 115.2 KB per second. Noisy and long-run connections will slow the transmission

rate.

Upload Icon

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Camera

Day/Night (23X) Color

NTSC, PAL

2:1 interlace

LowLight^™(22X) Color

NTSC, PAL

2:1 Interlace

Signal Format

Scanning System

Image Sensor

1/4-inch progressive scan CCD

1/4-inch EXview HAD™ CCD

Effective pixels

NTSC

768 (H) x 494 (V)

752 (H) x 582 (V)

768 (H) x 494 (V)

752 (H) x 582 (V)

PAL

Horizontal Resolution

NTSC

PAL

540 TV lines

>470 TV lines

>460 TV lines

Lens

Zoom

f/1.6 (focal length, 3.6~82.8 mm optical)

23X optical, 10X digital

f/1.6 (focal length, 4~88 mm optical)

22X optical, 12X digital

Zoom Speed

2.9/4.2/5.8 seconds

2.4/3.9/6.3 seconds

Horizontal Angle of View

54° at 3.6 mm wide zoom

2.5° at 82.8 mm telephoto zoom

47° at 4.0 mm wide zoom

2.2° at 88 mm telephoto zoom

Focus

Automatic with manual override

Maximum Sensitivity at

35 IRE

NTSC

0.025 lux at 1/2 sec shutter (color)

0.1 lux at 1/60 sec shutter (B-W)

0.004 lux at 1/2 sec shutter (B-W)

0.02 lux at 1/2 sec shutter

0.02 lux at 1/1.5 sec shutter

PAL

0.025 lux at 1/1.5 sec shutter (color)

0.1 lux at 1/50 sec shutter (B-W)

0.004 lux at 1/1.5 sec shutter (B-W)

Sync System

Internal/AC line lock, phase adjustable using

remote control, V-Sync*

Internal/AC line lock, phase adjustable using

remote control, V-Sync*

White Balance

Shutter Speed

Automatic with manual override*

Automatic (electronic iris)/Manual

Automatic with manual override*

Automatic (electronic iris)/Manual

NTSC

PAL

1/2~1/30,000*

1/1.5~1/30,000*

Iris Control

Automatic Iris Control with manual override*

Gain Control

Video Output

Video Signal to Noise

Wide Dynamic Range

Automatic/OFF*

1 Vp-p, 75 ohms

>50 dB

Automatic/OFF*

1 Vp-p, 75 ohms

>50 dB

80X

N/A

*Manual control of camera setup functions can be done with CM6700, CM6800, CM8500, CM9500, CM9740, CM9760, CM9770,

CM9780, KBD200A, KBD300A, and MPT9500 controllers, but not with CM7500, MPT9000 or KBD9000 controllers.

C1300M-C (11/08)

Download from Www.Somanuals.com. All Manuals Search And Download.

PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in

material or workmanship for a period of one year after the date of shipment.

Pelco will warrant all replacement parts and repairs for 90 days from the date of

Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid

to a Pelco designated location. Repairs made necessary by reason of misuse,

alteration, normal wear, or accident are not covered under this warranty.

Exceptions to this warranty are as noted below:

• Five years:

Pelco assumes no risk and shall be subject to no liability for damages or loss

resulting from the specific use or application made of the Products. Pelco’s liability

for any claim, whether based on breach of contract, negligence, infringement of

any rights of any party or product liability, relating to the Products shall not exceed

the price paid by the Dealer to Pelco for such Products. In no event will Pelco be

liable for any special, incidental, or consequential damages (including loss of use,

loss of profit, and claims of third parties) however caused, whether by the

negligence of Pelco or otherwise.

–

Fiber optic products

TW3000 Series unshielded twisted pair (UTP) transmission products

CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and

MC3651H-2X camera models

• Three years:

–

Pelco-branded fixed camera models (CCC1390H Series, C10DN Series,

C10CH Series, and IP3701H Series)

EH1500 Series enclosures

Spectra^®IV products (including Spectra IV IP)

Camclosure^®Series (IS, ICS, IP) integrated camera systems

DX Series digital video recorders, DVR5100 Series digital video recorders,

Digital Sentry^®Series hardware products, DVX Series digital video

recorders, and NVR300 Series network video recorders

Endura^®Series distributed network-based video products

Genex^®Series products (multiplexers, server, and keyboard)

PMCL200/300/400 Series LCD monitors

–

The above warranty provides the Dealer with specific legal rights. The Dealer may

also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or

(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the

following information:

–

1. Model and serial number

2. Date of shipment, P.O. number, sales order number, or Pelco invoice number

3. Details of the defect or problem

• Two years:

If there is a dispute regarding the warranty of a product that does not fall under

the warranty conditions stated above, please include a written explanation with

the product when returned.

–

Standard motorized or fixed focal length lenses

DF5/DF8 Series fixed dome products

Legacy^®Series integrated positioning systems

Spectra III^™, Spectra Mini, Spectra Mini IP, Esprit^®, ExSite^®, and PS20

scanners, including when used in continuous motion applications.

Method of return shipment shall be the same or equal to the method by which the

item was received by Pelco.

–

Esprit Ti and TI2500 Series thermal imaging products

Esprit and WW5700 Series window wiper (excluding wiper blades).

CM6700/CM6800/CM9700 Series matrix

RETURNS

To expedite parts returned for repair or credit, please call Pelco at (800) 289-9100

or (559) 292-1981 to obtain an authorization number (CA number if returned for

credit, and RA number if returned for repair) and designated return location.

Digital Light Processing (DLP^®) displays (except lamp and color wheel). The

lamp and color wheel will be covered for a period of 90 days. The air filter is

not covered under warranty.

Intelli-M^®eIDC controllers

All merchandise returned for credit may be subject to a 20 percent restocking and

refurbishing charge.

–

• One year:

Video cassette recorders (VCRs), except video heads. Video heads will be

covered for a period of six months.

• Six months:

All pan and tilts, scanners, or preset lenses used in continuous motion

applications (preset scan, tour, and auto scan modes).

–

Goods returned for repair or credit should be clearly identified with the assigned

CA or RA number and freight should be prepaid.

–

11-11-08

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union

regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

REVISION HISTORY

Manual #

C1300M

C1300M-A

C1300M-B

C1300M-C

Date

11/04

4/05

6/05

11/08

Comments

Original version.

Removed references to -4 models.

Added 22X color camera.

Changed type of lighting settings and camera specs per CN22046.

Pelco, the Pelco logo, Camclosure, Digital Sentry, Endura, Esprit, ExSite, Genex, Intelli-M, Legacy, and Spectra are registered trademarks of Pelco, Inc.

Spectra III and LowLight are trademarks of Pelco, Inc.

DLP is a registered trademark of Texas Instruments Incorporated.

EXviewHAD is a trademark of the Sony Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

www.pelco.com

Pelco, Inc. Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150

International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120

Download from Www.Somanuals.com. All Manuals Search And Download.

Pentax Digital Camera ILX User Manual
Philips Car Satellite TV System 32PFL3406H User Manual
Philips Network Router CPWBS001 User Manual
Pioneer Stereo Amplifier PRS D400 User Manual
Porter Cable Air Compressor CFFC350C User Manual
Poulan Chainsaw 530164650 User Manual
Powermate Portable Generator PM0435001 User Manual
Primera Technology Label Maker 74293R User Manual
Pure Digital Radio DMX 25 User Manual
PYLE Audio Car Stereo System PLMRKT12 User Manual