®
HS2400
Indoor Enclosure
Installation/
Operation Manual
C1470M (9/97)
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
Download from Www.Somanuals.com. All Manuals Search And Download.
1.0 GENERAL
1.1 IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be
observed.
1. Installation and servicing should only be done by Qualified Service Personnel
and conform to all Local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or
6P enclosure, it is designed for indoor use only and it must not be installed
where exposed to rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. After replacement/repair of this unit’s electrical components, conduct a resis-
tance measurement between line and exposed parts to verify the exposed
parts have not been connected to line circuitry.
5. The installation method and materials should be capable of supporting four
(4) times the weight of the enclosure, pan/tilt, camera and lens combination.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.
CAUTION:
RISK OF
ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Please thoroughly familiarize yourself with the information
in this manual prior to installation and operation.
Pelco Manual C1470M (9/97)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 UNPACKING INSTRUCTIONS
Unpack and inspect all parts carefully.
The following parts are supplied:
1
1
1
1
1
Camera enclosure
5/32-inch tamper-resistant hex key
1/4-20 x .5" bolt
1/4" flat washer
1/4" split lock washer
Be sure to save the shipping carton and any inserts. They are the safest material in
which to make future shipments.
If an item appears to have been damaged in shipment, replace it properly in its
carton and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replace-
ment. (International customers fax 1-559-348-1120 for authorization and instruc-
tions.)
If an item needs to be returned to the factory for repair, consult the WARRANTY
AND RETURN section of this manual for instructions.
1.3 RECOMMENDED TOOLS
Pelco does not supply basic tools needed for the installation process. The following
tools are recommended:
Hand tools
Drill
Coaxial cable stripper
BNC crimp tool
Wire cutter
Wire stripper
2
Pelco Manual C1470M (9/97)
Download from Www.Somanuals.com. All Manuals Search And Download.
2.0 DESCRIPTION
The HS2400 medium-security camera housing provides a low-cost, tamper-resistant
corner mount for fixed camera applications. The HS2400 is designed to be installed
flush against a ceiling. The smaller frontal area and reduced overall size create an
unobtrusive enclosure that is ideal for today’s smaller cameras. The HS2400 will
accommodate Pelco box cameras with vari-focal lenses that do not exceed 8 inches
(20.32 cm) in total length. Three conduit knockouts allow wires to be brought into
the housing from the rear sides or the top.
Pelco Manual C1470M (9/97)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.0 INSTALLATION
Before mounting the HS2400, make certain that the mounting surface is capable of
supporting four (4) times the weight of the enclosure plus camera and lens.
Determine the location of the enclosure and means of delivering all necessary ca-
bling before beginning the installation process. Knockouts that will accommodate
1/2-inch (1.27 cm) conduit have been provided on both wall mounting surfaces and
the ceiling surface.
3.1 FLUSH CEILING OR MID-WALL CORNER MOUNT
To install the HS2400:
1. Remove the two (2) tamper-resistant screws on the underside of the housing
(using the hex key that is provided) and separate the cover from the mounting
bracket. Remove the tilt table assembly.
2. Using the mounting bracket as a template, mark on the mounting surface
eight holes for mounting the enclosure and, as required, holes for cabling. Drill
the holes.
3. Attach the enclosure with eight 1/4-20 fasteners (not supplied).
4. Route cabling to the enclosure. Refer to Table A for the type of video coaxial
cable to use. If your camera will use 24 VAC power, refer to Table B to deter-
mine the size of wire to use. If you are using conduit, attach it to the enclosure.
5. Mount the camera and lens to the tilt table assembly with the 1/4" bolt, flat
washer and split locker washer that are provided. Install the completed as-
sembly onto the mounting bracket.
6. Make all camera and lens connections and adjust the tilt table assembly and
camera lens as necessary.
7. Replace the cover. Check that all components clear the cover and that cam-
era angle and lens adjustments are satisfactory. When all adjustments are
complete, secure the cover with the hex key that is provided.
4
Pelco Manual C1470M (9/97)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A. Video Coaxial Cable Wiring Distances
Cable Type*
Maximum Distance
RG59
RG 6
RG11
750 ft (229 m)
1,000 ft (305 m)
1,500 ft (457 m)
* Minimum cable requirements:
75 ohms impedance
All-copper center conductor
All-copper braided shield with 95% braid coverage
Table B. 24 VAC Wiring Distances
The following are the recommended maximum distances for 24 VAC applications
and are calculated with a 10-percent voltage drop. (10-percent is generally the
maximum allowable voltage drop for AC-powered devices.)
EXAMPLE:An enclosure that re-
quires 80 vA and is installed 35 feet
(10 m) from the transformer would
require a minimum wire gauge of
20 Awg.
Wire Gauge
22
20
18
16
14
12
10
10
20
30
40
50
60
70
80
90
178 283 451
716 1142 1811 2880
(54) (86) (137) (218) (348) (551) (877)
89 141 225 358 571 905 1440
(27) (42) (68) (109) (174) (275) (438)
NOTE: Distances are calculated
in feet; values in parentheses are
meters.
59
94 150
238 380 603 960
(72) (115) (183) (292)
(17) (28) (45)
44
70 112
179 285 452 720
(54) (86) (137) (219)
(13) (21) (34)
35 56 90
143 228 362 576
(43) (69) (110) (175)
(10) (17) (27)
29
(8)
47
75
119 190 301 480
(36) (57) (91) (146)
(14) (22)
25
(7)
40
64
102 163 258 411
(31) (49) (78) (125)
(12) (19)
35 56
22
(6)
89
142 226 360
(10) (17)
31 50
(27) (43) (68) (109)
19
(5)
79
126 201 320
(9) (15)
28 45
(24) (38) (61) (97)
71 114 181 288
100 17
(5)
(8) (13)
25 41
(21) (34) (55) (87)
65 103 164 261
110 16
(4)
(7) (12)
23 37
(19) (31) (49) (79)
59 95 150 240
120 14
(4)
(7) (11)
21 34
(17) (28) (45) (73)
55 87 139 221
130 13
(3)
(6) (10)
(16) (26) (42) (67)
51 81 129 205
140 12
(3)
20
(6)
32
(9)
(15) (24) (39) (62)
47 76 120 192
150 11
(3)
18
(5)
30
(9)
(14) (23) (36) (58)
44 71 113 180
160 11
(3)
17
(5)
28
(8)
(13) (21) (34) (54)
42 67 106 169
170 10
(3)
16
(4)
26
(7)
(12) (20) (32) (51)
39 63 100 160
180
190
200
9
15
(4)
25
(7)
(2)
(11) (19) (30) (48)
37 60 95 151
9
14
(4)
23
(7)
(2)
(11) (18) (28) (46)
35 57 90 144
8
14
(4)
22
(6)
(2)
(10) (17) (27) (43)
Pelco Manual C1470M (9/97)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4.0 MAINTENANCE
Clean the window regularly to help maintain picture clarity. Use a soft cloth and a
mild nonabrasive detergent.
6
Pelco Manual C1470M (9/97)
Download from Www.Somanuals.com. All Manuals Search And Download.
5.0 MECHANICAL PARTS LIST
Item No.
Qty
Description
Mounting plate
Part Number
1
2
1
1
1
2
5
5
1
1
2
2
2
1
HS24004002COMP
HS24001000WA
HS240010000
Front cover
Window
3
4
Button-head tamper-resistant screw
Nut, 4-40
ZH1/4-20X.50TSS
ZH4-40NUTSH
ZH125X312X32S
DF54001COMP
DF54002COMP
ZH1/4-20NUTCH
ZH1/4LWSSL
5
6
Flat washer
7
Tilt table support leg
Tilt table
8
9
Nut, 1/4-20
10
11
12
Split lock washer, 1/4"
Fender washer
ZH255X1.50X62
ZTHEXKEY5/32
5/32-inch tamper-resistant hex key
Pelco Manual C1470M (9/97)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6.0 SPECIFICATIONS
MECHANICAL
Camera Mounting: Adjustable tilt table
Maximum
Camera/Lens
Size:
Accommodates camera/lens combinations
(including BNC connector) up to:
8.0" L x 4.0" W x 4.0" H (20.32 cm x 10.16 cm x 10.16 cm)
Viewing Window: 1/2" (1.27 cm) thick, optically clear Lexan™ plastic that is
impact and scratch resistant
Window
Viewing Area:
4.25" x 2.56" (10.8 cm x 6.50 cm)
Cable Entry:
Ø.875-inch (2.22 cm) knockout access through rear walls and
top. Knockouts accept 1/2-inch (1.27 cm) conduit.
Enclosure
Mounting:
Eight (8) Ø.250-inch (.635 cm) mounting holes on protected
rear surfaces
GENERAL
Construction:
Finish:
10-gauge steel
Gray polyester powder coat
See Figure 1
Dimensions:
Environment:
Unit Weight:
Indoor
17.90 lbs (8.12 kg)
Shipping Weight: 19.30 lbs (8.76 kg)
Rating: NEMA 1
(Design and product specifications subject to change without notice.)
8
Pelco Manual C1470M (9/97)
Download from Www.Somanuals.com. All Manuals Search And Download.
3.75
(9.53)
1.50
(3.81)
4.00
(10.16)
13.00 (33.02)
10.25 (26.04)
8.63
(21.92)
6.50
(16.51)
4.25
(10.80)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES
Figure 1. HS2400 Dimension Drawing
Pelco Manual C1470M (9/97)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
7.0 WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or
workmanship for a period of one year after the date of shipment.
Exceptions to this warranty are as noted below:
•
•
•
Five years on FT/FR8000 Series fiber optic products.
Three years on Genex® Series products (multiplexers, server, and keyboard).
Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X,
CC3751H-2,CC3651H-2X,MC3651H-2,andMC3651H-2Xcameramodels,whichhaveafive-
year warranty.
•
•
Two years on standard motorized or fixed focal length lenses.
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed
dome products.
•
Two years on Spectra®, Esprit®, ExSite™, and PS20 scanners, including when used in
continuous motion applications.
•
•
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).
Eighteen months on DX Series digital video recorders, NVR300 Series network video
recorders, and Endura™ Series distributed network-based video products.
•
•
One year (except video heads) on video cassette recorders (VCRs). Video heads will be
covered for a period of six months.
Sixmonthsonallpanandtilts,scannersorpresetlensesusedincontinuousmotionapplications
(that is, preset scan, tour and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment.
AllgoodsrequiringwarrantyrepairshallbesentfreightprepaidtoPelco,Clovis,California.Repairs
made necessary by reason of misuse, alteration, normal wear, or accident are not covered under
this warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the
specific use or application made of the Products. Pelco’s liability for any claim, whether based on
breach of contract, negligence, infringement of any rights of any party or product liability, relating
totheProductsshallnotexceedthepricepaidbytheDealertoPelcoforsuchProducts. Innoevent
will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss
of profit and claims of third parties) however caused, whether by the negligence of Pelco or
otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer may also have
additional rights, which are subject to variation from state to state.
Ifawarrantyrepairisrequired, theDealermustcontactPelcoat(800) 289-9100or(559)292-1981
to obtain a Repair Authorization number (RA), and provide the following information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall under the warranty
conditions stated above, please include a written explanation with the product when returned.
Methodofreturnshipmentshallbethesameorequaltothemethodbywhichtheitemwasreceived
by Pelco.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800)
289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit,
and RA number if returned for repair).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number
and freight should be prepaid. Ship to the appropriate address below.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed
to return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:
Pelco, the Pelco logo, Camclosure, Esprit,
Genex, Legacy, and Spectra are registered
trademarks of Pelco.
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
Endura and ExSite are trademarks of Pelco.
© Copyright 1997, Pelco. All rights reserved.
10
Pelco Manual C1470M (9/97)
Download from Www.Somanuals.com. All Manuals Search And Download.
|