C1964M-B (6/02)
VIDEO4X4
Video Security System
®
3500 Pelco Way
Clovis, CA 93612-5699
USA
IMPORTANT
Only use the installation methods illustrated in this manual to properly install the
VIDEO4X4 or VIDEO4X4PLUS system. Do not refer to the installation methods illus-
trated in the manuals supplied with the components (DVR, monitor, and cameras).
Refer to component manuals for operating instructions only.
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1(559) 292-1981
FAX +1(559) 348-1120
DESCRIPTION
Pelco’s VIDEO4X4 is an all-in-one video security system. The system includes a digital video
recorder, quad monitor, and four cameras with mounts.
Models
VIDEO4X4
Four-channel digital video recorder, 30 GB hard drive for video storage,
120 VAC, NTSC
VIDEO4X4PLUS Four-channel digital video recorder, 60 GB hard drive for video storage,
120 VAC, NTSC
INSTALLATION
There are two methods of installation for the system; full screen playback and quad view play-
back. Refer to Figures 1 and 2. Select the desired configuration for your installation. Make all
equipment connections as illustrated in the drawing.
Pelco Manual C1964M-B (6/02)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
QUAD VIEW PLAYBACK
Images Per Second:
With preview – up to 15 fps
Without preview – up to 30 fps
Record Time:
8 weeks (1 fps) with 30 GB hard drive
16 weeks (1 fps) with 60 GB hard drive
Playback Mode:
Quad view, only
To setup the VIDEO4X4 for quad view playback refer to Figure 2 and do the following:
1. Connect cameras to the S-Video inputs located on the back of the monitor. Video cables
are supplied with the cameras. Set CH (camera) input switches to 75Ω.
2. Use a BNC cable (supplied) and connect MONITOR OUT located on the back of the
monitor to the CAMERA 3 INPUT of the recorder. Set the MONITOR OUT switch to 75Ω.
3. Connect the recorder’s MONITOR OUTPUT to the VIDEO IN located on the back of the
monitor. Use the supplied BNC/RCA adapter to connect the BNC cable to the VIDEO IN
input.
4. Program the VIDEO4X4 system:
a. Set the monitor to VCR mode.
b.
Program the DX1004 recorder:
(1.) Set Camera operation for cameras 1, 2 and 4 to OFF.
(2.) Set Camera operation for camera 3 to ON.
(3.) Set the Preview Function.
(4.) Select the resolution for Camera 3.
(5.) Program fps for Camera 3.
Refer to the manuals supplied with the monitor and recorder for programming instructions.
VIDEO IN
NOTE: Set all monitor termina-
tion switches to 75Ω. Set the
monitor output switch to HI.
75
Hi 75
Hi 75
Hi 75
Hi 75
Hi
MAIN
VIDEO AUDIO
IN
IN
MONITOR
OUT
CH 1
CH 2
CH 3
CH 4
OUT
IN/OUT
A/C INLET
FOCUS
MONITOR
REMOTE*
SCREEN
CH 1 CH 2 CH 3 CH 4 TRIG
OUT
POWER
ON
OFF
AC IN
INPUT
OUTPUT
CAMERA
MOTOR
VIDEO PRINTER
RECORDER
ALARM
SENSOR
NTSC
PAL
1
2
3
4
00889
Figure 2. Quad View Playback
Pelco Manual C1964M-B (6/02)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING/OPERATION
For complete programming and operation instructions refer to the installation and operation
manuals supplied with the digital video recorder, quad monitor, and cameras.
NOTE: The VIDEO4X4 system cannot record and play back video at the same time. Turn
the DVR recording mode off before playing back video.
PRODUCT WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or
workmanship for a period of one year after the date of shipment.
If
a
warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following
information:
1. Model and serial number
Exceptions to this warranty are as noted below:
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
•
•
•
Five years on FT/FR8000 Series fiber optic products.
Three years on Genex® Series products (multiplexers, server, and keyboard).
If there is a dispute regarding the warranty of a product which does not fall under the
warranty conditions stated above, please include a written explanation with the product
when returned.
Three years on Camclosure® and fixed camera models, except the CC3701H-2,
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,
which have a five-year warranty.
Method of return shipment shall be the same or equal to the method by which the item was
received by Pelco.
•
•
Two years on standard motorized or fixed focal length lenses.
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series
fixed dome products.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory at
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned
for credit, and RA number if returned for repair).
•
Two years on Spectra®, Esprit®, ExSite™, and PS20 scanners, including when used in
continuous motion applications.
•
•
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing
charge.
Eighteen months on DX Series digital video recorders, NVR300 Series network video
recorders, and Endura™ Series distributed network-based video products.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA
number and freight should be prepaid. Ship to the appropriate address below.
•
•
One year (except video heads) on video cassette recorders (VCRs). Video heads will be
covered for a period of six months.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:
Six months on all pan and tilts, scanners or preset lenses used in continuous motion
applications (that is, preset scan, tour and auto scan modes).
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident
are not covered under this warranty.
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are
instructed to return goods to the USA, you may do one of the following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from
the specific use or application made of the Products. Pelco’s liability for any claim, whether
based on breach of contract, negligence, infringement of any rights of any party or product
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for
such Products. In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) however caused,
whether by the negligence of Pelco or otherwise.
Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:
Pelco c/o Expeditors
473 Eccles Avenue
The above warranty provides the Dealer with specific legal rights. The Dealer may also have
additional rights, which are subject to variation from state to state.
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
REVISION HISTORY
Manual # Date
Comments
C1964M
6/01
6/01
6/02
Original version.
C1964M-A
C1964M-B
Added programming information. Revised illustrations.
Revised installation instructions.
Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.
Endura and ExSite are trademarks of Pelco.
©Copyright 2002, Pelco.
All rights reserved.
4
Pelco Manual C1964M-B (6/02)
Download from Www.Somanuals.com. All Manuals Search And Download.
|