Pelco Home Security System C2477M 6 03 User Manual

I N S T A L L A T I O N  
ICS090 Series Camclosure®  
Housing (Not Upgradeable)  
®
C2477M (6/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS AND WARNINGS  
1. Installation and servicing should be done only by qualified service personnel and conform to all  
local codes.  
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is  
designed for indoor use only and must not be installed where exposed to rain and moisture.  
3. Use only installation methods and materials capable of supporting four times the maximum  
specified load.  
C2477M (6/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
WELCOME  
Thank you for purchasing Pelco’s ICS090 Series Camclosure® housing for indoor applications. The  
unit is easy to install and can be mounted to the surface of a ceiling/wall or recessed in a ceiling/  
wall.  
The following is supplied with the ICS090 Series housing:  
Qty. Description  
1
1
2
2
2
2
Assembled ICS090 Series housing (back box and bubble)  
Adapter plate  
8-32 x 1.00-inch Phillips pan head screws  
8-32 x .750-inch self-tapping screws  
8-32 x 2.50-inch self-tapping screws  
10-32 x 1.50-inch self-tapping screws  
MODELS  
ICS-090HNU  
ICS-090BHNU  
White housing with smoked dome  
Black housing with smoked dome  
NOTE: ICS090 Series housing models are not compatible with camera and lens packages and are  
not upgradeable.  
4
C2477M (6/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOVE THE BUBBLE  
Turn the bubble counterclockwise and lift (refer to Figure 1). Place the bubble on a nonabrasive  
surface.  
Figure 1. How to Remove the Bubble  
C2477M (6/03)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL THE BACK BOX  
The installation methods for the ICS090 Series housing include the following:  
Mount to the surface of a ceiling/wall  
Install in a suspended ceiling  
Install in a fixed ceiling/wall  
Select the best method for your installation and refer to the following pages for instructions.  
INSTALLATION TO SURFACE OF A CEILING/WALL  
Using 6-32 toggle bolts, attach the surface mount ring and back box to the mounting surface (refer  
to Figure 2). For a concrete ceiling/wall installation, use 8-32 mounting hardware (refer to Figure 3).  
WALL OR  
CEILING  
6-32 TOGGLE BOLTS  
(NOT SUPPLIED)  
BACK BOX  
AND SURFACE  
MOUNT RING  
Figure 2. Ceiling/Wall Installation  
CONCRETE WALL  
OR CEILING  
8-32  
MOUNTING  
HARDWARE  
(NOT SUPPLIED)  
BACK BOX  
AND SURFACE  
MOUNT RING  
Figure 3. Concrete Ceiling/Wall Installation  
6
C2477M (6/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IN-CEILING INSTALLATION – SUSPENDED CEILING  
Refer to Figure 4 for the following steps.  
1. Remove the ceiling tile from the ceiling.  
2. Cut a four-inch diameter hole in the ceiling tile.  
3. Remove the surface mount ring from the back box. Refer to Figure 5 and do the following:  
a. Place fingers on the circular marks located on the sides of the surface mount ring.  
b. Pinch the sides.  
c. Lift and remove the surface mount ring from the back box. Do not discard surface mount  
ring, because it is required to complete the installation.  
4. Turn the surface mount ring upside down and place it on the inside of the ceiling tile.  
5. Attach the back box to the ceiling tile and surface mount ring with the two 10-32 x 1.50-inch  
self-tapping screws (supplied).  
6. Replace the ceiling tile.  
SURFACE MOUNT RING  
CEILING  
TILE  
BACK BOX  
10-32 x 1.50  
SELF-TAPPING  
SCREWS  
(SUPPLIED)  
Figure 4. Ceiling Tile Installation  
STANDOFF  
BACK BOX  
SURFACE  
MOUNT RING  
Figure 5. How to Remove Surface Mount Ring from Back Box  
C2477M (6/03)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
IN-CEILING INSTALLATION – FIXED CEILING/WALL  
Refer to Figure 6 for the following steps.  
1. Cut a four-inch diameter hole in the ceiling/wall.  
2. Remove the surface mount ring from the back box. Refer to Figure 5 and do the following:  
a. Place fingers on the circular marks located on the sides of the surface mount ring.  
b. Pinch the sides.  
c. Lift and remove the surface mount ring from the back box.  
3. Using 3-16 toggle bolts, attach the back box to the mounting surface.  
BACK  
BOX  
CEILING/  
WALL  
3-16 TOGGLE BOLTS  
(NOT SUPPLIED)  
Figure 6. In-Ceiling Installation to a Fixed Ceiling/Wall  
8
C2477M (6/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REINSTALL THE BUBBLE  
To install the bubble refer to Figure 7 and do the following:  
1. Align the standoffs of the bubble with the slots of the back box.  
2. Turn the bubble clockwise until it locks in place.  
Figure 7. How to Install the Bubble  
C2477M (6/03)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
General  
Construction  
Back Box and  
Surface Mount Ring: ABS plastic  
Bubble:  
Finish:  
Polycarbonate  
White  
Environment:  
Weight  
Indoor  
Unit:  
Shipping:  
.52 lb (.24 kg)  
2 lb (.91 kg)  
(Design and product specifications subject to change without notice.)  
5.30 (13.46)  
5.72 (14.53)  
1.65  
(4.19)  
4.04  
(10.26)  
4.04  
(10.26)  
2.39  
(6.07)  
3.90  
3.90  
(9.91)  
(9.91)  
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.  
10  
C2477M (6/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of  
shipment. Exceptions to this warranty are as noted below:  
Five years on Pelco manufactured cameras (CC3500/CC3600/CC3700 and MC3500/MC3600 Series); two years on all other cameras.  
Three years on Genex® Series (multiplexers, server, and keyboard) and 090 Series Camclosure® Camera System.  
Two years on 100/150, 200 and 300 Series Camclosure® Camera Systems.  
Two years on cameras and all standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM6800E/CM8500/CM9500/CM9740/CM9760 Matrix, DF5 and DF8 Series Fixed Dome products.  
Two years on Spectra®, Esprit®, and PS20 Scanners, including when used in continuous motion applications.  
Two years on Esprit and WW5700 series window wiper (excluding wiper blades).  
Eighteen months on DX Series digital video recorders.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent  
freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under  
this warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products.  
Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to  
the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or  
consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or  
otherwise.  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from  
state to state.  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and  
provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an  
authorization number (CA number if returned for credit, and RA number if returned for repair).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the  
appropriate address below.  
If you are located within the continental U.S., Alaska, Hawaii or  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico:  
Puerto Rico:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Intermediate Consignee  
American Overseas Air Freight  
320 Beach Road  
Burlingame, CA 94010  
USA  
Ultimate Consignee  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
USA  
® Pelco, the Pelco logo, Spectra, Genex, Legacy, Esprit, and Camclosure are registered trademarks of Pelco.  
© Copyright 2003, Pelco. All rights reserved.  
REVISION HISTORY  
Manual #  
Date  
Comments  
C2477M  
6/03  
Original version.  
C2477M (6/03)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
World Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pella Window 81470102 User Manual
Philips Car Satellite TV System 47PFL7433D User Manual
Philips MP3 Player 10FF2CMI User Manual
Philips Speaker SBC BA110 User Manual
Philips TV VCR Combo CCB193AT99 User Manual
Pioneer Car Stereo System P4800MP User Manual
Pioneer CD Player DEH 200MP User Manual
Playskool Motorized Toy Car 06104 User Manual
Pure Acoustics Car Stereo System D440 User Manual
PYLE Audio Microphone PDWM2300 User Manual