Pelco Home Security System C2445M D User Manual

ADDENDUM

Addendum No. C2499M-A

Date November 17, 2005

Manuals Affected Spectra III^™SE Series Dome Drive Manuals: C2443M-C, C2444M-C, and C2445M-D

Manual Update The following are manual changes for Spectra III SE software Version 1.28 and greater and instructions for accessing a

Spectra III EVS dome system.

Presets

Spectra III SE system presets have been upgraded from 80 to 150. Each of the user-deﬁnable presets can be programmed to use pan, tilt, camera settings,

and motion detection. The programmable presets are numbered 1-32, 35-82, and 100-150.

The following presets are predeﬁned for speciﬁc functions:

“Flip” command

Select main programming menu

Stop a scan

“Pan zero” command

IR ﬁlter IN (color)

Random scanning

Frame scanning

IR ﬁlter OUT (black-white)

90-91 Manual limit stops

92-93 Scan limit stops

Start auto scanning

Title Text

Title Text has been added to the Dome Settings menu. The title text is the

label used to identify the camera when it is viewed on the monitor. Up to

20 characters can be used for a title.

DOME SETTINGS

TITLE TEXT

<ZONES>

<AUX>

<ALERT>*

ENABLE TITLE TEXT

BACK

EXIT

To edit the title text label, do the following:

1. Use the joystick to position the cursor beside EDIT TITLE TEXT.

<CLEAR>

BACK

EXIT

2. Press Iris Open.

LABEL FOR PRESET

^{PRESET NUMBER}------

3. Use the joystick to position the cursor beside a character. Press Iris Open to select the character. To clear a

character, position the cursor beside BACKSPACE and then press Iris Open.

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

CANCEL

SPACE

4. When the title is completed, move the cursor to OK. Press Iris Open to return to the Title Text menu.

5. Enable the title text label by doing the following:

abcdefghij

klmnopqrst

uvwxyz*;:

BACKSPACE

a. Move the cursor beside ENABLE TITLE TEXT.

b. Press Iris Open. The cursor moves to the right.

c. Move the joystick up or down to view the selections. Select ON and then press Iris Open to enable the title text.

(Continued on next page)

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION/PROGRAMMING

Spectra III^™SE Series

Models DD53C22 & DD53C22-X

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION/PROGRAMMING MANUAL

MODELS DD53C22 & DD53C22-X

22X LowLight^™COLOR TECHNOLOGY

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

WELCOME ................................................................................................................................................................................................ 5

GETTING STARTED .......................................................................................................................................................................... 5

HOW TO OPERATE YOUR DOME SYSTEM .............................................................................................................................................. 6

ACCESSING MAIN MENU (PRESET 95) .......................................................................................................................................... 7

CM6700/CM6800 ................................................................................................................................................................... 7

KBD200A/KBD300A (DIRECT MODE ONLY) ........................................................................................................................... 7

CM9500 .................................................................................................................................................................................. 7

CM9740/CM9760 ................................................................................................................................................................... 7

KBD4000/KBD4002 (GENEX MULTIPLEXER) .......................................................................................................................... 8

MPT9500 ................................................................................................................................................................................ 8

PELCONET ............................................................................................................................................................................... 8

LANGUAGE .............................................................................................................................................................................................. 11

SYSTEM INFORMATION.......................................................................................................................................................................... 12

DISPLAY SETUP ....................................................................................................................................................................................... 13

<LABEL POSITION> ......................................................................................................................................................................... 14

DOME SETTINGS ..................................................................................................................................................................................... 15

<CAMERA> ..................................................................................................................................................................................... 15

TYPE OF LIGHTING ................................................................................................................................................................ 15

AUTO FOCUS ......................................................................................................................................................................... 15

ZOOM LIMIT .......................................................................................................................................................................... 16

ZOOM SPEED ......................................................................................................................................................................... 16

LOW LIGHT LIMIT .................................................................................................................................................................. 16

<ADVANCED CAMERA SETTINGS> ............................................................................................................................................... 17

SHUTTER SPEED .................................................................................................................................................................... 17

AGC LIMIT ............................................................................................................................................................................. 17

AUTO IRIS .............................................................................................................................................................................. 18

AUTO SHARPNESS ................................................................................................................................................................ 19

AUTO WHITE BALANCE ........................................................................................................................................................ 19

BACKLIGHT COMPENSATION (BLC) ...................................................................................................................................... 20

VIDEO LEVEL .......................................................................................................................................................................... 20

<MOTION SETTINGS> .................................................................................................................................................................... 21

AUTO FLIP .............................................................................................................................................................................. 21

PROPORTIONAL PAN ............................................................................................................................................................. 21

PARK TIME ............................................................................................................................................................................ 22

SCAN SPEED ......................................................................................................................................................................... 23

PRESET FREEZE FRAME ........................................................................................................................................................ 23

LIMIT STOPS .......................................................................................................................................................................... 24

AZIMUTH ZERO ..................................................................................................................................................................... 25

<POWER UP> .................................................................................................................................................................................. 26

POWER UP ACTION ............................................................................................................................................................... 26

<LINE SYNC> .................................................................................................................................................................................. 27

<PRESETS> ..................................................................................................................................................................................... 28

<PATTERNS>................................................................................................................................................................................... 30

<ZONES> ........................................................................................................................................................................................ 31

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

<WINDOW BLANKING> ................................................................................................................................................................. 32

REVERSE ................................................................................................................................................................................ 34

BLANK ALL ABOVE/BLANK ALL BELOW ............................................................................................................................... 34

<ALARMS> ..................................................................................................................................................................................... 35

<AUX> ............................................................................................................................................................................................. 38

<ALERT> ......................................................................................................................................................................................... 39

REPEAT................................................................................................................................................................................... 39

ACK ACTION .......................................................................................................................................................................... 40

ACTIVATE AUX ....................................................................................................................................................................... 40

CURRENT READING .............................................................................................................................................................. 40

ALERT RESET ......................................................................................................................................................................... 40

<CLEAR> ......................................................................................................................................................................................... 41

<PASSWORD> ................................................................................................................................................................................ 42

RESET, CYCLE, POWER, REBOOT ............................................................................................................................................................ 43

RESET CAMERA .................................................................................................................................................................... 43

CYCLE CAMERA POWER ....................................................................................................................................................... 43

REBOOT SYSTEM .................................................................................................................................................................. 43

SOFTWARE/LANGUAGE FILE UPLOAD ................................................................................................................................................... 44

UPLOAD ICON ................................................................................................................................................................................. 44

SPECIFICATIONS ...................................................................................................................................................................................... 45

REGULATORY NOTICES ........................................................................................................................................................................... 46

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

WELCOME

Thank you for purchasing Pelco’s premier integrated dome system, Spectra III SE. Your new

system features a high resolution, color camera/optics package with LowLight^™technology and

programmable dome drive software.

This manual is designed to be a reference tool for the operation and programming of your

system. Inside you will find information about Spectra III SE’s features and commands, as well

as a detailed menu tree.

Getting Started

You will need to install your dome system before using this manual. Refer to the installation

packet supplied with the back box for installation instructions.

Once installed apply power to the Spectra III SE dome system. The system will start a configura-

tion sequence. When configuration is done, the following information is displayed:

Pelco Spectra III SE

*Version X.XX

D Address: 1

P Address: 2

Comm 2400, N, 8, 1

CONFIGURE DONE

This information will remain on the monitor until dome operation begins.

Refer to the following pages to learn how to operate and program your dome system.

* Pressurized Spectra III SE dome systems require software version 1.25 or higher to monitor

temperature, pressure, and dew point.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO OPERATE YOUR DOME SYSTEM

Operation

How to Control

Pan and Tilt

Move joystick or press the direction keys left/right and up/down.

Zoom Far

To zoom far, do the following:

1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit.

2. Release the button or joystick for one second.

3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the

picture you want or reach the digital zoom¹limit.

Zoom Wide

Press the Zoom Wide button or turn the joystick counterclockwise.

Scanning

Stop Scan

Preset 96

Preset 97

Preset 98

Preset 99

Random Scan

Frame Scan

Auto Scan

Presets

Patterns²

Zones

Refer to the documentation supplied with the control system.

Refer to the Zones section and to the documentation supplied with the control system.

Refer to the Alarms section in this manual.

Alarms

Auto Flip

Turn on or off in the programming menu. Refer to the Auto Flip section in this manual.

¹Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the

greater the reduction in resolution.

²The dome cannot do electronic zoom in a pattern. Optical zoom will operate in a pattern.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessing Main Menu (Preset 95)

You can call up the main menu on your monitor by programming (setting or creating) preset 95

(preset 28 if in AD32-preset mode).

Programming preset 95 for Pelco’s controllers varies according to the type of controller you are

using. Instructions for programming preset 95 are given below for various Pelco controllers.

CM6700/CM6800

1. Enter the number of the Spectra dome system and press the CAM key.

2. Enter 95 and hold the PRESET key for two seconds.

3. In the Edit Preset menu, arrow to SET and press the ACK key. The main menu appears.

KBD200A/KBD300A (DIRECT MODE ONLY)

1. Enter 95.

2. Hold the PRESET key (approximately five seconds) until the main menu appears on the

screen.

CM9500

1. Enter the number of the Spectra dome system and press the CAM key. The Main menu

appears.

2. Highlight SETUP in the Main menu and press the SELECT key.

3. Highlight CAM in the Setup menu and press the SELECT key.

4. Highlight PRESET in the Camera menu and press the SELECT key.

5. Enter 95 and press the F1 key. The main menu appears.

CM9740/CM9760

1. Press the ESCAPE key to open the Main menu. Select DEF. The Define Submenu appears.

2. Enter your four-digit PIN if this is your first time entering this mode.

3. Enter 95 and select PRST. The main menu appears on the monitor.

4. Select the Quit icon to return to the default menu.

(Continued on next page)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

KBD4000/KBD4002 (GENEX^®MULTIPLEXER)

1. Press the SPOT MONITOR key.

2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu

appears on the screen.

MPT9500

Standard Coaxitron Mode

1. Enter 95 and press the PRESET SET key.

2. Position the asterisk in the YES row and press the F1 key. The main menu appears.

Extended Coaxitron or RS-485 Mode

1. Enter 95 and press the PRESET SET key.

2. Press the F2 key. The main menu appears.

PelcoNet^™

1. Check the Set box.

2. Click the preset 95 button. The main menu appears.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

QUICK START GUIDE – SYSTEM SETUP

SPECTRA III

LANGUAGE

ENGLISH

Presets

ACK ALERT**

The following presets are reserved for special functions.

Preset

Function

Flip command

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

Quick Programming Guide

90-91

92-93

Manual limit stops

Scan limit stops

Select main programming menu

Stop a scan

Random scanning

Frame scanning

Start auto scanning

EXIT

Access main menu (preset 95). See the Accessing Main Menu

(Preset 95) section.

DOME SETTINGS

DISPLAY SETUP

SYSTEM INFORMATION

PRESET LABEL

ZONE LABEL

(2 SECS)

OFF

DOME DRIVE MODEL

DD53C22

AVAILABLE

XX.X

Use the joystick* to position the cursor beside menu selection.

Press Iris Open, the submenu/cursor moves to the right.

Move the joystick up or down to view selections.

Press Iris Open to make selection.

<ZONES>

BACK BOX MEMORY

SOFTWARE VERSION

BIOS VERSION

ZOOM

AZIMUTH/ELEVATION

DIRECTION

XX.X

FONT VERSION

XX.X

ALARM MESSAGE

(2 SECS)

COMM

2400, N, 8, 1

D ADDRESS

P ADDRESS

CM9500 MODE

32 PRESETS

PROTOCOL

OFF

NOTE: For American Dynamics controllers with only 32 presets, switch

SW3-1 on the dome drive to the ON position. When SW3-1 is ON, preset

RESTORE FACTORY DEFAULTS

<AUX>

99 becomes 32

98 becomes 31

97 becomes 30

96 becomes 29

95 becomes 28

93 becomes 26

92 becomes 25

91 becomes 24

90 becomes 23

89 becomes 22

88 becomes 21

<ALERT>**

<CLEAR>

X.XX

PRESSURIZED**

BACK

EXIT

BACK

EXIT

ADDITIONAL

LABEL POSITION

FREE MEMORY

LAST RESET

18304

POWER ON

0^O

[ZONE LABEL-------]

[PRESET LABEL-------]

[ALARM 1-------]

If the limit stops are turned off, presets 23-26 can be used as regular

presets.

Press Iris Close to cancel selection.

AZIMUTH ZERO OFFSET

MOTOR ACTIVE

CAMERA ACTIVE

FPGA VERSION

VIDEO LEVEL

YES

[ALERT MESSAGE-------]**

YES

NORMAL

XXXX-XXXX

SAVE AND EXIT

CANCEL AND EXIT

HELP

CAMERA

ENGLISH X.XX

LANGUAGE 1

ITALIANO X.XX

LANGUAGE 6

XXX⁰/-XXXO

XXX.XX

BACK

EXIT

MOTION

PRESETS

PRESET NUMBER

* * * PRESET NOT DEFINED * * *

CAMERA

PATTERNS

ZONES

WINDOW BLANKING

ALARMS

AUX

ALERT**

CLEAR

PASSWORD

ENABLE PASSWORD

POWER UP

LINE SYNC

LINE SYNC PHASE

AUTO FLIP

CLEAR ALL ZONES

OFF

OUTDOOR

STYLE

GRAY

RESUME

OFF

AUX 1 MODE

TOGGLE

REPEAT

CONSTANT

ALWAYS ON

TYPE OF LIGHTING

ZONE NUMBER

* * * ZONE NOT DEFINED * * *

POWER UP ACTION AUTO

PATTERN NUMBER

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

SCAN SPEED DEG/S

PRESET FREEZE FRAME

CLEAR ALL PRESETS

DWELL TIME (SECS)

ACK ACTION

ACTIVATE AUX

AUTO FOCUS

ZOOM LIMIT

SEQUENCE (SECS)

RESET DELAY (SECS)

CLEAR ALL PATTERNS

X176

BLANK ALL ABOVE

BLANK ALL BELOW

OFF

NONE

AUTO

CLEAR ALL WINDOW BLANKING

MEDIUM

RESET ALERT

AUX 2 MODE

TOGGLE

ZOOM SPEED

LOW LIGHT LIMIT

BACK

EXIT

BACK

EXIT

DWELL TIME (SECS)

BACK

EXIT

BACK

EXIT

RESTORE FACTORY DEFAULTS

OFF

BACK

EXIT

BACK

EXIT

BACK

EXIT

LIMIT STOPS

ZONE ENABLED

ZONE BLANKING

BACK

EXIT

BACK

EXIT

REFERENCE INFORMATION

PATTERN USAGE

REMAINING

BACK

EXIT

100%

BACK

EXIT

REFERENCE INFORMATION

AZIMUTH

BACK

EXIT

ELEVATION

ZOOM

BACK

EXIT

CUSTOM CAMERA SETTINGS

ADVANCED SETTINGS

SHUTTER SPEED

ALARM SETTINGS

CURRENT READING**

SET WINDOWS

EDIT THE PASSWORD

----------

AUTO

ALARM NUMBER

TEMPERATURE

DEWPOINT

PRESSURE

REFRESH

0°C

0°F

WINDOW NUMBER

AGC LIMIT

* If your controller does not have a joystick, use the up or down key.

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij

klmnopqrst

uvwxyz*;:

CANCEL

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

LOW

NONE

0°C

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

B GAIN

BACKLIGHT COMP

VIDEO LEVEL

AUTO

0°F

** This setting only applies to Pressurized Spectra III SE dome systems with software

version 1.25 or higher. Spectra III systems that are not pressurized or pressurized

systems that do not have dome drive software version 1.25 or higher will not display

this menu item.

0.0 PSIG

0.0 BAR

SPACE

BACKSPACE

ALARM CONTACT

N/O

ENABLE WINDOW

REVERSE

CLEAR WINDOW

BACK

EXIT

BACK

EXIT

482

BACK

EXIT

678

OFF

HIGH

Software version 1.25 or higher includes the software to monitor temperature,

pressure, and dew point for Pressurized Spectra III SE systems.

BACK

EXIT

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

LANGUAGE

The language for the on-screen menus is selectable. Available languages include English,

Spanish, French, German, Italian, and Portuguese. The factory default language is English.

SPECTRA III

LANGUAGE

ENGLISH

ACK ALERT*

To change the display language:

1. Use the joystick to position the cursor beside LANGUAGE.

2. Press Iris Open. The cursor moves to the right, beside the current, selected language.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

3. Move the joystick up or down to view selections. Press Iris Open to enter selection.

All on-screen menus are changed to the selected language.

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

SYSTEM INFORMATION

The system Information screen displays dome drive model, software version, available memory,

SPECTRA III

and other diagnostic information.

LANGUAGE

ENGLISH

ACK ALERT*

System settings cannot be changed using this screen. This screen is for reference only.

Use the following steps to display the System Information screen:

1. Use the joystick to position the cursor beside SYSTEM INFORMATION.

2. Press Iris Open. The SYSTEM INFORMATION window opens.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

SYSTEM INFORMATION

DOME DRIVE MODEL

DD53M22

AVAILABLE

XX.X

BACK BOX MEMORY

SOFTWARE VERSION

BIOS VERSION

XX.X

FONT VERSION

XX.X

COMM

2400, N, 8, 1

D ADDRESS

P ADDRESS

CM9500 MODE

32 PRESETS

PROTOCOL

OFF

PRESSURIZED*

X.XX

BACK

EXIT

ADDITIONAL

FREE MEMORY

LAST RESET

18304

POWER ON

0^o

AZIMUTH ZERO OFFSET

MOTOR ACTIVE

CAMERA ACTIVE

FPGA VERSION

VIDEO LEVEL

YES

NORMAL

XXXX-XXXX

CAMERA

LANGUAGE 1

LANGUAGE 2

ENGLISH X.XX

ESPANOL X.XX

LANGUAGE 3

LANGUAGE 4

LANGUAGE 5

LANGUAGE 6

BACK

PORTUGUES X.XX

DEUTSCH X.XX

FRANCAIS X.XX

ITALIANO X.XX

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY SETUP

Display setup allows you to program how labels are displayed on the monitor. The following

labels are available:

SPECTRA III

LANGUAGE

ENGLISH

PRESET LABEL - Identifies preset.

ACK ALERT*

ZONE LABEL - Identifies zone.

ZOOM RATIO - Identifies the amount of magnification.

AZIMUTH¹/ELEVATION²- Amount of pan from 0° and the amount of tilt from 0° horizontal.

DIRECTION - Displays compass direction.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

ALARM MESSAGE - Displays activated alarm.

A preset label is displayed when a preset is called. A zone label is displayed when the system

moves into a zone. The zoom ratio label is displayed when zoom is activated. Azimuth/elevation

and direction labels are displayed when pan/tilt is activated. An alarm message appears on the

monitor when an alarm occurs.

DISPLAY SETUP

PRESET LABEL

ZONE LABEL

2 (SECS)

OFF

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

The following settings are available for each label:

2 (SECS)

OFF - Label is not displayed when activated.

CONSTANT - The label is continually displayed when activated.

2 SECONDS - The label is displayed for 2 seconds after activation.

5 SECONDS - The label is displayed for 5 seconds after activation.

10 SECONDS - The label is displayed for 10 seconds after activation.

RESTORE FACTORY DEFAULTS

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

¹Azimuth is the pan angle from 0° to 359°.

²Elevation is the tilt position from 0° (horizon) to -90°.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

Labels can be placed anywhere on the monitor. This feature allows you to customize the

SPECTRA III

appearance of your monitor screen.

LANGUAGE

ENGLISH

ACK ALERT*

The following labels are not set at fixed positions:

PRESET LABEL

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

ZONE LABEL

ALARM 1

EXIT

ZOOM RATIO - XXX.XX

AZIMUTH¹/ELEVATION²- XXX°/-XX°

DIRECTION - NE

ALERT MESSAGE³*

DISPLAY SETUP

PRESET LABEL

ZONE LABEL

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

2 (SECS)

OFF

To set a label position:

1. Use the joystick to position the cursor beside a label.

2. Press Iris Open.

2 (SECS)

3. Use the joystick to move the label up, down, left, and/or right.

4. Press Iris Open.

RESTORE FACTORY DEFAULTS

BACK

EXIT

5. Repeat steps 1 through 4 to position other labels.

6. Position the cursor next to Save and Exit. Press Iris Open to save settings and exit

menu.

¹Azimuth is the pan angle from 0° to 359°.

LABEL POSITION

²Elevation is the tilt position from 0° (horizon) to -90°.

[ZONE LABEL-------]

[PRESET LABEL-------]

[ALARM 1-------]

³The alert message is the warning displayed on the monitor if pressure, temperature, or dew

point inside the dome reach unacceptable levels.

[ALERT MESSAGE-------]*

SAVE AND EXIT

CANCEL AND EXIT

HELP

XXX^o/-XXXo

XXX.XX

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

DOME SETTINGS

TYPE OF LIGHTING

SPECTRA III

LANGUAGE

ENGLISH

Pelco has calibrated settings that optimize the white balance, and the picture, for indoor and

outdoor lighting conditions. There are two settings:

ACK ALERT*

OUTDOOR (default)

INDOOR

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

AUTO FOCUS

Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.

There are two auto focus settings:

ON (default) - If auto focus mode is set to ON, the camera will focus automatically when

using pan, tilt, and zoom functions.

DOME SETTINGS

<ZONES>

OFF - Focus is operated manually. To focus, press the Focus Far or Focus Near button on the

controller.

<AUX>

<ALERT>*

<CLEAR>

BACK

EXIT

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

OUTDOOR

X176

ZOOM SPEED

LOW LIGHT LIMIT

MEDIUM

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

ZOOM LIMIT

SPECTRA III

LANGUAGE

ENGLISH

Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The default

setting is 176X.

ACK ALERT*

Cameras with 264X zoom (22X optical zoom and 12X electronic zoom) can be set for 22X, 32X,

88X, 176X, 220X, or 264X.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

ZOOM SPEED

Zoom Speed allows the user to define how fast the dome will go from full wide zoom to the 22X

optical zoom. The default setting is MEDIUM.

DOME SETTINGS

Available settings for zoom speed include the following:

HIGH – 2.4 seconds

MEDIUM (default) – 3.9 seconds

LOW – 6.3 seconds

<ZONES>

<AUX>

NOTE: When using the HIGH setting, the image may be out of focus until zooming stops.

<ALERT>*

<CLEAR>

BACK

LOW LIGHT LIMIT

EXIT

Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will

remain open in low light conditions. The default setting is 2.

Settings include the following:

2 =1/2 second

4 = 1/4 second

8 = 1/8 second

30 =1/30 second

60 =1/60 second

CAMERA

15 =1/15 second

TYPE OF LIGHTING

AUTO FOCUS

OUTDOOR

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

X176

MEDIUM

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECTRA III

SHUTTER SPEED

LANGUAGE

ENGLISH

Shutter speed is the duration of the electronic shutter. Program shutter speed to operate

automatically (Auto) or manually (Numeric Value).

ACK ALERT*

AUTO (default) - The electronic shutter speed is set automatically by the amount of light

sensed by the camera.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

NUMERIC VALUE - Spectra III SE dome system has several numerical shutter speed

settings. The higher the number, the faster the electronic shutter.

The slowest shutter speed setting is 2 = 1/2 second

The fastest setting is 30,000 = 1/30,000 second

DOME SETTINGS

<ZONES>

Increasing the shutter speed lowers the light sensitivity and reduces

the streaking of fast moving objects.

<AUX>

<ALERT>*

<CLEAR>

NOTE: Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz

environment. This will eliminate any flicker that may occur in the picture.

BACK

EXIT

AGC LIMIT

The AGC (automatic gain control) Limit adjusts the brightness of the picture. Settings range from

0 to 40. The brightness increases as the number gets higher.

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

OUTDOOR

X176

ZOOM SPEED

LOW LIGHT LIMIT

MEDIUM

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED

AUTO

AGC LIMIT

AUTO IRIS

AUTO

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

482

678

B GAIN

BACKLIGHT COMP

VIDEO LEVEL

OFF

HIGH

BACK

EXIT

Quick Programming Guide

* This setting only applies to Pressurized

Spectra III SE dome systems with

software version 1.25 or higher.

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

AUTO IRIS

SPECTRA III

LANGUAGE

ENGLISH

Auto iris is the lens function that automatically opens and closes the iris in response to changing

light conditions.

ACK ALERT*

Program the auto iris to operate automatically or at a user-defined level.

OFF - Auto iris is disabled, and control is always manual.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

AUTO (default) - The iris is adjusted automatically to produce a constant video output as

determined by the Auto Iris Level setting.

EXIT

NOTE: If auto iris is in the auto mode, it will remain that way until the iris is

manually opened or closed. The dome will return to auto mode when it is panned or

tilted more than 15 degrees.

DOME SETTINGS

<ZONES>

<AUX>

Auto Iris Level

Auto Iris Level is the numeric value the auto iris uses to maintain the brightness

level of the camera. Increase the value to brighten the scene. Decrease the level to

darken the scene. This setting can be adjusted if the video level in the auto iris

mode is too bright or too dark.

<ALERT>*

<CLEAR>

BACK

EXIT

NOTE: If backlight compensation is ON, decrease the Auto Iris Level setting.

Auto Iris Peak

CAMERA

Increasing the peak value will cause the auto iris circuit to react more to highlights

or “peaks” in the picture. Decreasing this value will cause it to use the average

video level to adjust the iris.

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

OUTDOOR

X176

MEDIUM

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED

AUTO

AGC LIMIT

AUTO IRIS

AUTO

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

482

678

B GAIN

BACKLIGHT COMP

VIDEO LEVEL

OFF

HIGH

BACK

EXIT

* This setting only applies to Pressurized

Spectra III SE dome systems with

software version 1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

AUTO SHARPNESS

SPECTRA III

LANGUAGE

ENGLISH

Auto sharpness enhances picture detail by increasing the aperture gain of the camera and

sharpening the edges in the picture.

ACK ALERT*

There are two settings:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

ON (default) - The camera automatically maintains a normal sharpness mode.

OFF - The sharpness of the picture is set manually by programming the SHARPNESS LEVEL.

Sharpness level settings range from 0-31.

EXIT

AUTO WHITE BALANCE

This feature automatically processes the viewed image to retain color balance over a color

temperature range. The default setting for auto white balance is ON.

DOME SETTINGS

<ZONES>

<AUX>

R GAIN - Adjusts the picture output in the red range. As you change the value, you will

see the color change on your monitor.

B GAIN - Adjusts the picture output in the blue range. As you change the value, you will

see the color change on your monitor.

<ALERT>*

<CLEAR>

BACK

EXIT

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

OUTDOOR

X176

ZOOM SPEED

LOW LIGHT LIMIT

MEDIUM

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED

AUTO

AGC LIMIT

AUTO IRIS

AUTO

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

482

678

B GAIN

BACKLIGHT COMP

VIDEO LEVEL

OFF

HIGH

BACK

EXIT

Quick Programming Guide

* This setting only applies to Pressurized

Spectra III SE dome systems with

software version 1.25 or higher.

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

BACKLIGHT COMPENSATION (BLC)

SPECTRA III

LANGUAGE

ENGLISH

If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette.

Backlight compensation enhances objects in the center of the picture. The dome uses the center

of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash

out to white. The camera will adjust the iris so that the object in the sensitive area is properly

exposed.

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

There are two backlight compensation settings:

ON - Backlight compensation is activated.

EXIT

OFF (default) - Backlight compensation is not activated.

DOME SETTINGS

NOTE: If backlight compensation is ON, decrease the Auto Iris setting. Refer to the Auto Iris

section.

<ZONES>

<AUX>

<ALERT>*

<CLEAR>

BACK

VIDEO LEVEL

Set the video output to one of the following:

NORMAL - 1.0 volt peak-to-peak

HIGH (default setting) - 1.2 volt peak-to-peak to compensate for losses in video cable.

EXIT

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

OUTDOOR

X176

ZOOM SPEED

LOW LIGHT LIMIT

MEDIUM

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED

AUTO

AGC LIMIT

AUTO IRIS

AUTO

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

R GAIN

482

678

B GAIN

BACKLIGHT COMP

VIDEO LEVEL

OFF

HIGH

BACK

EXIT

* This setting only applies to Pressurized

Spectra III SE dome systems with

software version 1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

AUTO FLIP

SPECTRA III

LANGUAGE

ENGLISH

When the camera tilts downward and goes just beyond the vertical position, the dome rotates

ACK ALERT*

180 degrees. When the dome rotates (flips), the camera starts moving upward as long as you

continue to hold the joystick in the down position. Once you let go of the joystick after the dome

rotates, joystick control returns to normal operation. The auto-flip feature is useful for following

a person who passes directly beneath the dome.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

There are two auto flip modes:

ON (default) - Auto flip mode is enabled.

OFF - Auto flip mode is disabled.

PROPORTIONAL PAN

DOME SETTINGS

<ZONES>

Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the

amount of zoom. At telephoto zoom settings, the pan and tilt speeds will be slower for a given

amount of joystick deflection than at wide zoom settings. This keeps the image from moving too

fast on the monitor when there is a large amount of zoom.

<AUX>

There are two proportional pan modes:

ON (default) - Enables the proportional pan mode.

<ALERT>*

<CLEAR>

OFF - Disables proportional pan mode. The pan speed will not depend on the amount of zoom.

BACK

EXIT

MOTION

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

NONE

AUTO

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

PARK TIME

SPECTRA III

LANGUAGE

ENGLISH

This feature allows the dome to begin a specified operation (scan, preset, or pattern) after a

programmed time of inactivity.

ACK ALERT*

Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which

disables this feature. The default setting is zero.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

Park Action

EXIT

This feature will define the activity when the dome parks. The following settings are

available:

NONE (default) - No action.

AUTO SCAN - Dome starts auto scan operation.

RANDOM SCAN - Dome starts random scan operation.

FRAME SCAN - Dome starts frame scan operation.

PRESET 1 - Dome goes to preset 1.

DOME SETTINGS

<ZONES>

PRESET 8 - Dome goes to preset 8.

<AUX>

PATTERN 1 - Dome runs pattern 1.

PATTERN 2 - Dome runs pattern 2.

<ALERT>*

<CLEAR>

PATTERN 3 - Dome runs pattern 3.

PATTERN 4 - Dome runs pattern 4.

BACK

EXIT

MOTION

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

NONE

AUTO

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

SCAN SPEED

SPECTRA III

LANGUAGE

ENGLISH

Scan speed is the degrees per second that the dome will pan when in a scan mode. Scan speed

is adjustable from 1 to 40 degrees per second through the programming menu. The default

setting is 25 degrees per second.

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

PRESET FREEZE FRAME

This feature freezes the scene on the monitor when going to a preset. This allows for smooth

transition from one preset scene to another. Preset freeze frame also reduces bandwidth when

used with digital network systems such as PelcoNet^™and guarantees that blanked areas will not

be revealed when going to a preset.

EXIT

There are three preset freeze frame settings:

DOME SETTINGS

ON - The image on the screen freezes when a preset is called. When the dome reaches the

preset, the image is unfrozen and the preset scene is displayed.

<ZONES>

<AUX>

OFF - The image is never frozen.

AUTO (default) - Freeze frame is turned on automatically if window blanking is ON. If

window blanking is OFF, freeze frame is off.

<ALERT>*

<CLEAR>

BACK

EXIT

MOTION

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

NONE

AUTO

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMIT STOPS

SPECTRA III

LANGUAGE

ENGLISH

Limit stops are programmable stops that limit the pan range of the dome. There must be two

limits, a left and a right, to define an area.

ACK ALERT*

There are two types of limit stops:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

MANUAL - A manual (joystick) pan operation stops when a limit stop is reached.

SCAN - The dome reverses direction during random, frame, or auto scanning when a limit

stop is reached.

EXIT

To set manual or scan stops:

1. Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN

STOPS.

DOME SETTINGS

<ZONES>

<AUX>

2. Press Iris Open.

3. Follow the directions displayed on the monitor.

NOTE: In order for the manual or scan stops to work, the LIMIT STOPS setting must be ON.

<ALERT>*

<CLEAR>

To clear manual or scan stops:

1. Use the joystick to position the cursor beside CLEAR MANUAL STOPS or CLEAR SCAN

STOPS.

BACK

EXIT

2. Press Iris Open.

3. Follow the directions displayed on the monitor.

MOTION

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

NONE

AUTO

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

AZIMUTH ZERO

SPECTRA III

LANGUAGE

ENGLISH

Azimuth is the pan angle from 0° to 359°. Azimuth zero is the pan position you specify to be the

0° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass

readings are based on the set Azimuth Zero point.

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

To program azimuth zero:

1. Use the joystick to position the cursor beside SET AZIMUTH ZERO.

2. Press Iris Open.

EXIT

3. Follow the directions displayed on the monitor.

To clear azimuth zero:

DOME SETTINGS

1. Use the joystick to position the cursor beside CLEAR AZIMUTH ZERO.

2. Press Iris Open.

<ZONES>

3. Follow the directions displayed on the monitor.

<AUX>

<ALERT>*

<CLEAR>

BACK

EXIT

MOTION

AUTO FLIP

PROPORTIONAL PAN

PARK TIME (MINUTES)

PARK ACTION

NONE

AUTO

SCAN SPEED (DEG/S)

PRESET FREEZE FRAME

LIMIT STOPS

BACK

EXIT

REFERENCE INFORMATION

MANUAL LIMITS SET

SCAN LIMITS SET

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECTRA III

POWER UP ACTION

LANGUAGE

ENGLISH

This setting defines a specific activity (scan, preset, pattern) to be performed in the event the

power to the dome is cycled.

ACK ALERT*

The following settings are available:

RESET CAMERA

NONE - No action.

CYCLE CAMERA POWER

REBOOT SYSTEM

AUTO (default) - The dome resumes its prior activity or direction before the power outage.

AUTO SCAN - Dome starts auto scan operation.

RANDOM SCAN - Dome starts random scan operation.

FRAME SCAN - Dome starts frame scan operation.

PRESET 1 - Dome goes to preset 1.

EXIT

DOME SETTINGS

PRESET 8 - Dome goes to preset 8.

<ZONES>

PATTERN 1 - Dome runs pattern 1.

PATTERN 2 - Dome runs pattern 2.

PATTERN 3 - Dome runs pattern 3.

<AUX>

PATTERN 4 - Dome runs pattern 4.

<ALERT>*

<CLEAR>

BACK

EXIT

POWER UP

POWER UP ACTION

AUTO

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

Line sync refers to a programmable function that allows you to synchronize all cameras within a

SPECTRA III

matrix system.

LANGUAGE

ENGLISH

ACK ALERT*

NOTE: Spectra III SE automatically senses V-sync input. No line sync setup is required for Pelco

control systems that provide a V-sync signal.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

For matrix systems that do not output V-sync, there are two settings for line synchronization:

ON (default) - Adjusts the phase of the line sync to synchronize input power. LINE SYNC

PHASE settings range from 0-359 degrees.

OFF - The dome synchronizes to an internal clock.

DOME SETTINGS

<ZONES>

<AUX>

<ALERT>*

<CLEAR>

BACK

EXIT

LINE SYNC

LINE SYNC PHASE

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

The Spectra III SE dome system has 80 programmable preset positions. Each preset can be

SPECTRA III

programmed to use pan, tilt, and all programmable camera settings.

LANGUAGE

ENGLISH

ACK ALERT*

The presets are numbered 1-32 and 35-82. Presets 33 and 34 are fixed commands that cannot be

programmed. Preset 33 is the “flip” command, which will pan the dome drive 180 degrees.

Preset 34 is the “pan zero” command, which will direct the dome drive to the factory-determined

zero reference point.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

Use the following steps to program a preset.

1. Select the preset number:

a. Use the joystick to position the cursor beside PRESET NUMBER. Press Iris Open.

The cursor moves to the right.

DOME SETTINGS

b. Move the joystick up or down to view selections. Press Iris Open to enter selection.

<ZONES>

<AUX>

2. Edit the preset label:

a. Use the joystick to position the cursor beside EDIT PRESET LABEL.

b. Press Iris Open. The following appears on the monitor:

LABEL FOR PRESET

<ALERT>*

<CLEAR>

^{PRESET NUMBER}------

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij

CANCEL

BACK

EXIT

SPACE

BACKSPACE

klmnopqrst

uvwxyz*;:

PRESETS

c. Use the joystick to position the cursor beside a character. Press Iris Open to enter

selection. To clear a character, position the cursor beside BACKSPACE, and then press Iris

Open.

PRESET NUMBER

* * * PRESET NOT DEFINED * * *

d. When label is completed, move the cursor to OK. Press Iris Open to return to the

Preset menu.

BACK

EXIT

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM RATIO

CUSTOM CAMERA SETTINGS

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Edit the preset scene:

SPECTRA III

a. Use the joystick to position the cursor beside EDIT PRESET SCENE.

b. Press Iris Open.

LANGUAGE

ENGLISH

ACK ALERT*

c. Follow the directions displayed on the monitor.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

4. Edit preset camera settings:

a. Use the joystick to position the cursor beside EDIT CAMERA SETTINGS.

EXIT

b. Press Iris Open. The EDIT CAMERA SETTINGS window appears on the monitor. Refer

to the Camera and Advanced Camera Settings sections of this manual to change

preset camera settings.

DOME SETTINGS

<ZONES>

NOTE: You can copy camera settings from one preset to another preset. To copy camera

settings do the following:

1. Use the joystick to position the cursor beside COPY CAMERA SETTINGS.

2. Press Iris Open. The cursor moves to the right.

<AUX>

3. Move the joystick up or down to view selections. Press Iris Open to enter selection.

<ALERT>*

<CLEAR>

BACK

EXIT

PRESETS

PRESET NUMBER

* * * PRESET NOT DEFINED * * *

BACK

EXIT

REFERENCE INFORMATION

AZIMUTH

ELEVATION

ZOOM RATIO

CUSTOM CAMERA SETTINGS

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

A pattern is a memorized, repeating, series of pan, tilt, zoom and preset functions that can be

SPECTRA III

recalled with a command from a controller or automatically by a programmed function (alarm,

park or power-up).

LANGUAGE

ENGLISH

ACK ALERT*

The Spectra III SE can handle up to four user-defined patterns. Pattern length is based upon

memory usage rather than a fixed amount of time. The complexity of a pattern will determine

the amount of storage available to program other patterns.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

To program a pattern:

1. Use the joystick to position the cursor beside PATTERN NUMBER. Press Iris Open. The

cursor moves to the right.

2. Move the joystick up or down to view selections. Press Iris Open to enter selection.

3. Use the joystick to position the cursor beside PROGRAM PATTERN.

4. Press Iris Open. The Patterns programming window appears on the monitor.

5. Follow the directions displayed on the monitor.

DOME SETTINGS

<ZONES>

<AUX>

After a pattern is programmed, the remaining storage percentage is displayed on the screen.

This is the amount of memory available to program the remaining patterns.

<ALERT>*

<CLEAR>

To clear a pattern:

1. Use the joystick to position the cursor beside CLEAR PATTERN.

2. Press Iris Open.

BACK

EXIT

3. Follow the directions displayed on the monitor.

NOTE: When programming one or more presets within a pattern use the normal controller

PATTERNS

commands to Call a Preset.

PATTERN NUMBER

NOTE: Not all controllers can start all four patterns. However, any of the four patterns can be

automatically started with park, power-up, and alarm functions.

BACK

EXIT

REFERENCE INFORMATION

PATTERN USAGE

REMAINING

100%

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

<Zones>

A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The Spectra

SPECTRA III

dome system is capable of eight zones, each with a 20-character label.

LANGUAGE

ENGLISH

ACK ALERT*

To program a zone:

1. Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the

cursor moves to the right.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

2. Move the joystick up or down to view selections. Press Iris Open to enter selection.

3. Use the joystick to position the cursor beside EDIT ZONE.

EXIT

4. Press Iris Open. The Zone programming window appears on the monitor.

5. Follow the directions displayed on the monitor. After the left and right limit stops are

set, the Zones menu reappears with the ZONE ENABLED option set to YES.

DOME SETTINGS

<ZONES>

To edit a zone label:

1. Use the joystick to position the cursor beside EDIT ZONE LABEL.

2. Press Iris Open. The following appears on the monitor:

3. Use the joystick to position the cursor beside a character. Press Iris Open to enter

selection. To clear a character, position the cursor beside BACKSPACE, and then press

Iris Open.

<AUX>

<ALERT>*

<CLEAR>

LABEL FOR PRESET

BACK

EXIT

^{PRESET NUMBER}------

1234567890

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

abcdefghij

CANCEL

SPACE

BACKSPACE

klmnopqrst

uvwxyz*;:

ZONES

ZONE NUMBER

* * * ZONE NOT DEFINED * * *

4. When the label is completed, move the cursor the OK. Press Iris Open to return to the

Zones menu.

ZONE ENABLED

ZONE BLANKING

OFF

To disable a zone (a zone is enabled automatically when it is programmed) or to blank a zone:

1. Move the cursor beside ZONE ENABLED or ZONE BLANKING.

BACK

EXIT

2. Press Iris Open. The cursor moves to the right.

3. Move the joystick up or down to view selections. Press Iris Open to enter selection.

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

To clear a zone:

1. Use the joystick to position the cursor beside CLEAR ZONE.

2. Press Iris Open. Follow the instructions on the screen.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

Window blanking allows a user to program up to eight, four-sided, user-defined areas that

cannot be viewed by the operator of the dome system. A blanked area will move with pan and

tilt functions and automatically adjust in size as the lens zooms telephoto and wide.

SPECTRA III

LANGUAGE

ENGLISH

ACK ALERT*

Spectra III SE has two style modes for window blanking, GRAY and SMEAR. If style is set to

gray, the blanked area is covered with a solid gray window. If smear is selected images behind

the window will be noticeable but not distinguishable.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

To set a window blanking area:

1. Use the joystick to position the cursor beside WINDOW BLANKING. Press Iris Open.

The WINDOW BLANKING menu appears on the screen.

DOME SETTINGS

2. Move the joystick to position the cursor beside SET WINDOWS. Press Iris Open to enter.

<ZONES>

<AUX>

3. Position the cursor beside WINDOW NUMBER. Press Iris Open. The cursor moves to

the right.

4. Move the joystick up or down to view selections. Press Iris Open to enter selection.

5. Use the joystick to position the cursor beside EDIT WINDOW LOCATION. Press Iris

Open, and then follow the instructions that appear on the screen.

<ALERT>*

<CLEAR>

BACK

EXIT

NOTE: Use the inside corner of the window selection

tool as a guide when selecting the upper left, upper right,

bottom right, and bottom left corners of the window.

WINDOW BLANKING

STYLE

NOTE: Set windows are not visible when editing a new window location.

GRAY

BLANK ALL ABOVE

BLANK ALL BELOW

OFF

When all four corners are set, the SET WINDOWS menu reappears, the blanked area

is displayed, and the ENABLE WINDOW option is set to YES.

BACK

EXIT

SET WINDOWS

WINDOW NUMBER

ENABLE WINDOW

REVERSE

CLEAR WINDOW

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

6. The blanked area can be programmed to turn on or off at a specified zoom point. To set the

zoom point:

a. Use the joystick to position the cursor beside EDIT WINDOW ZOOM, and then press

Iris Open.

b. Zoom in to the point where you want window blanking to turn on. Press Iris Open to

set the zoom point.

TIP: Since the area is already blanked out, it may be difficult to determine when you want

window blanking to turn on. Reverse the window before setting the zoom point. When

finished reverse the window again to blank out the area.

IMPORTANT: Increase the

size of the window if any part

of the blanked area is

revealed during pan, tilt, and

zoom operations.

Window Blanking Disabled

Window Blanking Enabled

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

REVERSE

A blanked out area can be reversed to make it visible and the areas on both sides of it not visible. The areas above and below the

blanking area remain visible. Reversing the window a second time will return it to its original condition.

CLEAR WINDOW

All areas that have been set for window blanking are cleared.

BLANK ALL ABOVE/BLANK ALL BELOW

Blank All Above and Blank All Below add additional flexibility to setting up privacy areas. These settings are ideal for applications

where a complete pan location needs to be blanked.

Blank All Above

Blank All Below

Blanks everything above a user-defined tilt angle. A blanked

band will appear at the top of the screen. The following

settings are available:

Blanks everything below a user-defined tilt angle. A blanked

circle will appear below the specified angle. The following

settings are available:

OFF (default) - No blanking

0 - Blanks area from horizon to 2° below horizon

-10 - Blanks area from horizon to 10° below horizon

-20 - Blanks area from horizon to 20° below horizon

-30 - Blanks area from horizon to 30° below horizon

-40 - Blanks area from horizon to 40° below horizon

-50 - Blanks area from horizon to 50° below horizon

-60 - Blanks area from horizon to 60° below horizon

-70 - Blanks area from horizon to 70° below horizon

-80 - Blanks area from horizon to 80° below horizon

0 - Blanks area from 2° to 92° below horizon

-10 - Blanks area from 10° to 92° below horizon

-20 - Blanks area from 20° to 92° below horizon

-30 - Blanks area from 30° to 92° below horizon

-40 - Blanks area from 40° to 92° below horizon

-50 - Blanks area from 50° to 92° below horizon

-60 - Blanks area from 60° to 92° below horizon

-70 - Blanks area from 70° to 92° below horizon

-80 - Blanks area from 80° to 92° below horizon

HORIZON

CAMERA

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

The Spectra III SE dome has seven alarm inputs, which can be programmed as high, medium or

SPECTRA III

low priority. When an alarm is received, an input signal to the dome triggers the user-defined

action (go to preset, run pattern, etc.) programmed for the alarm.

LANGUAGE

ENGLISH

ACK ALERT*

There are three global alarm settings:

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

RESUME - This mode lets the dome resume its previous activity (scan, pattern, or previous

position) after all alarms are cleared.

EXIT

SEQUENCE - This is the time the dome will perform an alarm activity when more than one

alarm of the same priority occurs at the same time.

RESET DELAY - This is the amount of time the dome considers the alarm to be active after

it has physically cleared.

DOME SETTINGS

Use the following steps to program alarm settings.

<ZONES>

<AUX>

1. Use the joystick to position the cursor beside ALARM SETTINGS. Press Iris Open.

2. Select the alarm number:

a. Use the joystick to position the cursor beside ALARM NUMBER.

b. Press Iris Open. The cursor moves to the right.

c. Move the joystick up or down to view selections. Press Iris Open to enter selection.

<ALERT>*

<CLEAR>

BACK

EXIT

(Continued on next page)

ALARMS

RESUME

SEQUENCE (SECS)

RESET DELAY (SECS)

OFF

BACK

EXIT

ALARM SETTINGS

ALARM NUMBER

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

LOW

NONE

ALARM CONTACT

N/O

BACK

EXIT

Quick Programming Guide

* This setting only applies to Pressurized

Spectra III SE dome systems with

software version 1.25 or higher.

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Select the alarm priority:

SPECTRA III

a. Use the joystick to position the cursor beside ALARM PRIORITY.

b. Press Iris Open. The cursor moves to the right.

LANGUAGE

ENGLISH

ACK ALERT*

c. Move the joystick up or down to view the available selections. Available settings

include HIGH, MEDIUM, and LOW (default). If multiple alarms with different priorities

are active at the same time, the dome will only go to the alarms with the highest

priority.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

d. Press Iris Open to enter selection.

NOTE: HIGH - Alarm action takes highest priority and will override manual pan, tilt,

and zoom control.

DOME SETTINGS

MEDIUM/LOW - Alarm action will not occur if an alarm occurs during manual

pan, tilt, and zoom control.

<ZONES>

<AUX>

4. Set the alarm action:

a. Use the joystick to position the cursor beside ALARM ACTION.

b. Press Iris Open. The cursor moves to the right.

<ALERT>*

<CLEAR>

c. Move the joystick up or down to view the available selections. The following are the

settings for alarm action:

BACK

EXIT

NONE - No action when alarm is triggered.

PRESET - Dome goes to the preset that is the same as the alarm number. Preset

1 will go to Alarm 1.

PATTERN 1 - Dome runs pattern 1 when alarm is triggered.

PATTERN 2 - Dome runs pattern 2 when alarm is triggered.

PATTERN 3 - Dome runs pattern 3 when alarm is triggered.

PATTERN 4 - Dome runs pattern 4 when alarm is triggered.

AUTO SCAN - Dome starts auto scan operation when alarm is triggered.

RANDOM SCAN - Dome starts random scan operation when alarm is triggered.

FRAME SCAN - Dome starts frame scan operation when alarm is triggered.

d. Press Iris Open to enter selection.

ALARMS

RESUME

OFF

SEQUENCE (SECS)

RESET DELAY (SECS)

BACK

EXIT

ALARM SETTINGS

ALARM NUMBER

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

LOW

NONE

ALARM CONTACT

N/O

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Set the auxiliary to activate:

SPECTRA III

a. Use the joystick to position the cursor beside ACTIVATE AUX.

b. Press Iris Open. The cursor moves to the right.

c. Move the joystick up or down to view the following available selections.

NO (default) - Not activated.

LANGUAGE

ENGLISH

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

1 - An alarm action will close AUX 1.

2 - An alarm action will close AUX 2.

d. Press Iris Open to enter selection.

NOTE: The AUX 1/AUX2 will stop when all the alarms assigned to it have cleared. If

the AUX1/AUX is set up as momentary, then it will be activated each time a new

alarm is activated.

DOME SETTINGS

<ZONES>

<AUX>

6. Set the alarm contact:

a. Use the joystick to position the cursor beside ALARM CONTACT.

b. Press Iris Open. The cursor moves to the right.

c. Move the joystick up or down to view the following available selections.

N/O (default) - Normally open

<ALERT>*

<CLEAR>

BACK

EXIT

N/C - Normally closed

d. Press Iris Open to enter selection.

ALARMS

RESUME

SEQUENCE (SECS)

RESET DELAY (SECS)

OFF

BACK

EXIT

ALARM SETTINGS

ALARM NUMBER

ALARM PRIORITY

ALARM ACTION

ACTIVATE AUX

LOW

NONE

ALARM CONTACT

N/O

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

<Aux>

SPECTRA III

An auxiliary output is a programmable signal from the dome back box that can trigger another

device to operate. An auxiliary output is programmable to trigger from an alarm or from a

controller.

LANGUAGE

ENGLISH

ACK ALERT*

An AUX 1 command from the controller will activate the relay in the dome and operate the

device that is connected to the relay. The output of AUX 1 can be connected to the alarm input of

a system switch to activate automatic monitor switching and recording.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

An AUX 2 command from the controller will place a ground at the output of AUX 2 to operate the

device that is connected to it.

The following are the available AUX MODE settings:

DOME SETTINGS

TOGGLE (default) - Changes the state of the auxiliary output every time an AUX command

is received from the controller.

<ZONES>

<AUX>

LATCHING - Must receive an AUX ON/AUX OFF command from the controller to turn the

auxiliary output on/off.

MOMENTARY - An AUX ON command from the controller turns the auxiliary output on for

the programmed DWELL TIME. The auxiliary output will automatically turn

off when the dwell time is finished.

<ALERT>*

<CLEAR>

BACK

EXIT

AUX

AUX 1 MODE

DWELL TIME (SECS)

AUX 2 MODE

TOGGLE

DWELL TIME (SECS)

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

<Alert>

SPECTRA III

NOTE: The Alert section only applies to Pressurized Spectra III SE dome systems with software

version 1.25 or higher. Spectra III SE systems that are not pressurized or pressurized systems

that do not have dome drive software version 1.25 or higher will not display this menu item.

LANGUAGE

ENGLISH

ACK ALERT

Software version 1.25 or higher includes the software to monitor temperature, pressure, and

dew point for Pressurized Spectra III SE systems.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

Sensors strategically placed inside the pressurized dome system continually monitor pressure,

temperature, and dew point. If internal conditions reach unacceptable levels, an alert message

appears on the screen describing the alert condition. Example: If pressure drops below 1 psig,

“LOW PRESSURE” is displayed on the monitor.

DOME SETTINGS

<ZONES>

<AUX>

The following system conditions will trigger an alert message:

System Condition

Alert Message

Temperature is above 140°F (60°C)

Temperature is below -40°F (-40°C).

Pressure is above 11 PSIG.

Pressure is below 1 PSIG

HIGH TEMPERATURE

LOW TEMPERATURE

HIGH PRESSURE

LOW PRESSURE

<ALERT>

<CLEAR>

The difference between the temperature and the dew point is

less than or equal to 3°C.

DEW POINT (HIGH

HUMIDITY)

BACK

EXIT

The alert message will be repeatedly displayed until the system controller acknowledges the

alert condition by selecting ACK ALERT in the main menu. Once acknowledged, the alert

message changes to the programmed acknowledge action (ACK ACTION). If the alert condition

remains active after a period of time, the alert message reappears on the monitor, restarting the

alert message cycle. This cycle will continue to repeat until the alert condition is resolved.

ALERT

REPEAT

ACK ACTION

CONSTANT

ALWAYS ON

ACTIVATE AUX

RESET ALERT

REPEAT

This setting programs how often an alert message is repeatedly displayed until the system

controller acknowledges the alert condition. The following are the settings for REPEAT:

BACK

EXIT

CONSTANT - The alert message is continuously displayed on the monitor until acknowl-

edged.

15 MIN - The alert message is displayed every 15 minutes for a 15-second duration until

acknowledged.

30 MIN - The alert message is displayed every 30 minutes for a 15-second duration until

acknowledged.

60 MIN - The alert message is displayed every 60 minutes for a 15-second duration until

acknowledged.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

ACK ACTION

SPECTRA III

Acknowledge action programs the alert label behavior after the alert condition has been

acknowledged. The following settings are available for ACK ACTION:

LANGUAGE

ENGLISH

ACK ALERT

ALWAYS ON - The alert label is displayed until alert conditions are cleared.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

OFF 8 HRS - The alert label is turned off for 8 hours. Label returns after 8 hours if the alert

condition persists.

OFF 24 HRS - The alert label is turned off for 24 hours. Label returns after 24 hours if the

alert condition persists.

DOME SETTINGS

OFF 48 HRS - The alert label is turned off for 48 hours. Label returns after 48 hours if the

alert condition persists.

<ZONES>

<AUX>

ACTIVATE AUX

This setting activates an auxiliary when an alert condition exists. ACTIVATE AUX settings include

the following:

NO (default) - Not activated.

1 - An alert condition will close AUX 1.

2 - An alert condition will close AUX 2.

<ALERT>

<CLEAR>

BACK

EXIT

CURRENT READING

The Current Reading menu displays the existing status of temperature, pressure, and dew point

inside the dome system. An arrow displayed to the left of a menu item denotes that an alert

condition exists. An up arrow indicates the reading is over the threshold. A down arrow

indicates the reading is below the threshold.

ALERT

REPEAT

ACK ACTION

CONSTANT

ALWAYS ON

ACTIVATE AUX

RESET ALERT

The high temperature alert occurs if the temperature is above 140°F (60°C).

The low temperature alert occurs if the temperature is below -40°F (-40°C).

The high pressure alert occurs if the pressure is above 11 PSIG.

The low pressure alert occurs if the pressure is below 1 PSIG.

BACK

EXIT

The dew point (high humidity) alert occurs if the difference between the temperature and

the dew point is less than or equal to 3°C.

NOTE: The normal operating temperature inside the unit will be greater than the temperature

outside the back box due to the heat emitted by the system’s electronics.

CURRENT READING

TEMPERATURE

DEWPOINT

PRESSURE

REFRESH

0°C

0°F

0°C

0°F

ALERT RESET

0.0 PSIG

0.0 BAR

Alert reset clears the alert condition and removes the alert label from the monitor. The system

automatically checks internal conditions 60 seconds after reset. If conditions are still unaccept-

able, the alert label reappears on the screen indicating further corrective action is required.

BACK

EXIT

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

<Clear>

Use this setting to clear user-defined settings or return the dome to factory default settings.

SPECTRA III

LANGUAGE

ENGLISH

The following are the available CLEAR settings:

ACK ALERT*

ALL ZONES - Clears all zones. To clear a single zone, refer to the Zones section.

ALL PRESETS - Clears all presets. To clear a single preset, refer to the Presets section.

ALL PATTERNS - Clears all patterns. To clear a single patterns, refer to the Patterns section.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

ALL WINDOW BLANKING - Clears all blanked windows. To clear a single blanked window,

refer to the Window Blanking section.

EXIT

RESTORE FACTORY DEFAULTS - Restores all camera settings to factory default settings.

DOME SETTINGS

<ZONES>

<AUX>

<ALERT>*

<CLEAR>

BACK

EXIT

CLEAR

CLEAR ALL ZONES

CLEAR ALL PRESETS

CLEAR ALL PATTERNS

CLEAR ALL WINDOW BLANKING

RESTORE FACTORY DEFAULTS

BACK

EXIT

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

Spectra III SE features password protection to prevent unauthorized changes to the dome

SPECTRA III

settings. An operator can open the System Information and Display Setup Screens, but cannot

access any of the Dome Settings menus.

LANGUAGE

ENGLISH

ACK ALERT*

Controller/keyboard commands cannot override password-protected settings. If a keyboard is

used to set a preset, pattern, or zone, the Enter Password screen appears on the monitor.

The password must be entered before programming can continue.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

At least one character must be entered to create a valid password.

DOME SETTINGS

<ZONES>

<AUX>

<ALERT>*

<CLEAR>

BACK

EXIT

PASSWORD

ENABLE PASSWORD

OFF

BACK

EXIT

EDIT THE PASSWORD

----------

1234567890

CANCEL

ABCDEFGHIJ

KLMNOPQRST

UVWXYZ.,-/

SPACE

abcdefghij

klmnopqrst

uvwxyz*;:

BACKSPACE

* This setting only applies to Pressurized

Spectra III SE dome systems with

software version 1.25 or higher.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

RESET, CYCLE POWER, REBOOT

RESET CAMERA

SPECTRA III

LANGUAGE

ENGLISH

Use this function to reset all camera settings to factory default parameters.

ACK ALERT*

CYCLE CAMERA POWER

If the camera is not operating or if you lose camera control, cycle camera power. Cycling camera

power resets the camera but does not change any saved camera settings.

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

REBOOT SYSTEM

Reboot the system if it is not operating or if there is no control. Rebooting the system will cycle

dome and camera power without changing programmed dome settings.

* This setting only applies to

Pressurized Spectra III SE dome

systems with software version

1.25 or higher.

Quick Programming Guide

(See page 9)

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

SOFTWARE/LANGUAGE FILE UPLOAD

The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of

revised operating software and language files. A Pelco field service tool is required to perform

these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK), remote data

port box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).

For instructions on how to upload revised operating software and language files refer to the

Installation/Operation manual supplied with the field service tool.

NOTE: Only perform software uploads when necessary. Software uploads do not need to be

performed if the dome system is operating properly.

UPLOAD ICON

During a software/language file upload, an icon will appear on the monitor to indicate data is

being transferred to the Spectra dome system (refer to the figure below). The default setting for

data transmission is 115.2 KB per second. Noisy and long-run connections will slow the

transmission rate.

Upload Icon

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

DD53C22

Signal Format

NTSC

Scanning System

Image Sensor

2:1 Interlace

1/4-inch CCD

Effective pixels

Horizontal Resolution

Lens

768 (H) X 494 (V)

>470 TV lines

F1.6 (f=4~88 mm optical, 22X optical zoom, 12X electronic zoom)

3.9 seconds

Zoom Speed

Horizontal Angle of view

Focus

Maximum Sensitivity at 35 IRE

Sync System

White Balance

Shutter Speed

47° at 4 mm wide zoom; 2.2° at 88 mm telephoto zoom

Automatic with manual override

0.02 lux at 1/2 sec. shutter speed

Internal/AC line lock, phase adjustable via remote control, V-sync

Automatic with manual override

Automatic (electronic iris)/manual

1/2 ~ 1/30,000

Iris Control

Gain Control

Automatic iris control with manual override

Automatic/off

Video Output

1 Vp-p, 75 ohms

Video Signal to Noise

>50 dB

DD53C22-X

Signal Format

PAL

Scanning System

Image Sensor

2:1 Interlace

1/4-inch CCD

Effective pixels

Horizontal Resolution

Lens

752 (H) X 582 (V)

>460 TV lines

F1.6 (f=4~88 mm optical, 22X optical zoom, 12X electronic zoom)

3.9 seconds

Zoom Speed

Horizontal Angle of view

Focus

Maximum Sensitivity at 35 IRE

Sync System

White Balance

Shutter Speed

47° at 4 mm wide zoom; 2.2° at 88 mm telephoto zoom

Automatic with manual override

0.02 lux at 1/1.5 sec. shutter speed

Internal/AC line lock, phase adjustable via remote control, V-sync

Automatic with manual override

Automatic (electronic iris)/manual

1/1.5 ~ 1/30,000

Iris Control

Gain Control

Automatic iris control with manual override

Automatic/off

Video Output

1 Vp-p, 75 ohms

Video Signal to Noise

>50 dB

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

REGULATORY NOTICES

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.”

This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to

operate this equipment under Federal Communications Commission’s rules.

REVISION HISTORY

Manual #

C2444M

C2444M-A

C2444M-B

C2444M-C

Date

2/02

11/02

2/03

1/04

Comments

Original version.

Revised Quick Start Guide.

Manual revised to include features of software version 1.2.

Added alert feature. Updated menus and instructions.

® Pelco, the Pelco logo, and Genex are registered trademarks of Pelco.

™ Spectra III, PelcoNet, and LowLight are trademarks of Pelco.

C2444M-C (1/04)

Download from Www.Somanuals.com. All Manuals Search And Download.

World Headquarters

3500 Pelco Way

Clovis, California 93612 USA

USA & Canada

Tel: 800/289-9100

Fax: 800/289-9150

International

Tel: 1-559/292-1981

Fax: 1-559/348-1120

www.pelco.com

ISO9001

Download from Www.Somanuals.com. All Manuals Search And Download.

Peavey Portable Speaker 1580 User Manual
Pentax Digital Camera OptioWP User Manual
Philips Indoor Furnishings 34617 48 16 User Manual
Philips MP3 Player 7FF2CWO User Manual
Philips Work Light 57904 87 16 User Manual
Philips Work Light SR T5 User Manual
Pioneer Stereo Amplifier S A9700V User Manual
Poulan Trimmer 952711961 User Manual
ProForm Home Gym PFANBE14250 User Manual
Proson Home Theater System rv2600 dts User Manual