I N S T A L L A T I O N
®
DX9000RM-KIT
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION
The DX9000RM-KIT allows you to upgrade DX9000 recorders and viewstations with the same RAID Manager software that is
found in DX9200 recorders and DX9100 viewstations. To perform the upgrade, you need the following:
•
•
•
DX9000RM-KIT
DX9000 recorder with external IDE storage unit
DX9000 viewstation
C644M (1/04)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Make sure the following parts are included with your kit.
1
1
1
1
1
Viewstation Disk #1
Viewstation Disk #2
Viewstation Disk #3
Recorder Disk
Floppy Ghost Disk
NOTE: You must write down your system’s name and IP address, and export all videos before starting these procedures.
BIOS CONFIGURATION PROCEDURE
This procedure allows you to boot from the CD-ROM.
1. Turn the viewstation on.
2. Press Delete each time you are prompted during startup. The following screen appears.
Figure 1. CMOS Setup Utility
4
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select Advanced BIOS Features, and then press Enter. The following screen appears.
Figure 2. Advanced BIOS Features
4. Select CDROM as the First Boot Device, and then press Enter.
5. Select Floppy as the Second Boot Device, and then press Enter.
6. Select HDD-0 as the Third Boot Device, and then press Enter.
7. Press Esc.
8. Press F10. The following prompt appears.
Figure 3. Save to CMOS Prompt
9. Press Y. The system restarts.
C644M (1/04)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GHOST PROCEDURE
This procedure allows you to configure your master viewstation.
1. Close all applications on the viewstation.
2. Insert Viewstation Disk #1 (CD-DX9000RM-VS1) into the CD-ROM drive of the viewstation.
3. Go to Start > Shutdown > Restart.
4. Press Enter at the Norton Ghost boot screen. Ghost starts the installation process.
5. Insert Viewstation Disk #2 (CD-DX9000RM-VS2) when requested, and then press Enter.
6. Insert Viewstation Disk #3 (CD-DX9000RM-VS3) when requested, and then press Enter. You will see the A:\>Prompt when
the process is complete.
7. Remove Viewstation Disk #3, and then press Ctrl+Alt+Del. The viewstation starts and performs a scan disk operation,
restarts automatically, and then prompts you to restart again.
8. Left-click the Yes button, and then close any error messages that appear.
9. Configure the date and time, IP address, network identification, and Client Configuration Utility on your master
viewstation. Refer to the DX9000 Viewstation Operation manual.
10. Configure the web page address, Internet Explorer settings, the recorders, and the Event Notification settings. Refer to
the RAID Manager Utility and RAID Manager Home Page sections in the DX9200 Digital Video Recorder & DX9100
Viewstation Installation manual.
LOADING RAID MANAGER SOFTWARE
The following steps show how to install the RAID Manager software on DX9000 recorders.
1. Load the RAID Manager software (CD-DX9000RM-R1) into the CD-ROM drive of any viewstation.
2. Copy the Raid Manager folder from the CD-ROM to the C:\Additional Installs folder on the viewstation.
Figure 4. Raid Manager Folder Copy Procedure
6
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use pcAnywhere™ remote control software to select the recorder you wish to install the RAID Manager software on.
Figure 5 shows a recorder named PELCO124.
Figure 5. DX9000 Recorder
4. Click OK. The login window appears.
Figure 6. Login Window
5. Enter your username and password. The default username is admin and the default password is admin.
C644M (1/04)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Click OK. The following window appears.
Figure 7. Recorder Applications
7. Close all applications on the recorder, such as the DX9000 Recording Server application and DX9000 Server Attendant
application.
8. Go to Start > Run and enter \\viewstation name\C$ where viewstation name is the actual name of the viewstation.
Figure 8 shows a viewstation name of pelcovs1.
Figure 8. Viewstation Name
9. Click OK. The login window appears.
8
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Enter your username and password. The default username is admin and the default password is 1234. The following
window appears.
Figure 9. Additional Installs Folder
C644M (1/04)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Open the Additional Installs folder on the viewstation. The following window appears.
Figure 10. Raid Manager Folder
10
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Copy the RAID Manager software on the viewstation to the Additional Installs folder on the recorder.
Figure 11. Raid Manager Software Copy Procedure
13. Close the network connection to the viewstation and install the Raid Manager.
C644M (1/04)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RAID MANAGER INSTALLATION
Before you install this utility on the recorder, you must install it on the administrator viewstation.
1. Open the Additional Installs folder on the recorder. The following window appears.
Figure 12. Setup Program Folder
2. Double-click SETUP. The following dialog box appears.
Figure 13. Welcome Dialog Box
12
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click Next. The following dialog box appears.
Figure 14. Software License Agreement Dialog Box
4. Click Yes. The following dialog box appears.
Figure 15. Choose Destination Location Dialog Box
C644M (1/04)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click Next. The following dialog box appears.
Figure 16. Select Components Dialog Box
6. Select Raid Manager Server, and then click Next. The following dialog box appears.
Figure 17. Raid Manager Server Component
14
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click Next. The following dialog box appears.
Figure 18. Select Program Folder Dialog Box
8. Click Next and then Finish.
C644M (1/04)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURE THE RAID MANAGER SERVER
1. Go to Start > Programs > Raid Manager Utility > Raid Manager Server > Raid Manager Server. The following dialog box
appears.
Figure 19. Detect Option Dialog Box
2. Verify that the process found “1 SCSI/Fiber RAID Controller.”
3. Select No, and then click OK. The following window appears.
Figure 20. Raid Manager Watch Window
4. Verify that the RAID Utility detected the SCSI unit.
5. Click OK. The Raid Manager Server icon appears on the taskbar.
16
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Right-click the Raid Manager Server icon. The following menu appears.
Figure 21. Run at Windows Startup Menu Option
7. Select “Run at Windows Startup.”
8. Right-click the icon again to verify that “Run at Windows Startup” changed to “Remove from Windows Startup.”
9. Select Disable Detect and verify that Enable Detect appears.
Figure 22. Remove at Windows Startup Menu Option
10. Restart the recorder.
C644M (1/04)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
18
C644M (1/04)
Download from Www.Somanuals.com. All Manuals Search And Download.
REVISION HISTORY
Manual #
Date
Comments
C644M
1/04
Original version.
® Pelco and the Pelco logo are registered trademarks of Pelco.
® Windows is a registered trademark of Microsoft Corporation.
™ pcAnywhere is a trademark of Symantec.
© Copyright 2004, Pelco.
All rights reserved.
C644M (1/04)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
®
World Headquarters
3500 Pelco Way
Clovis, California 93612 USA
USA & Canada
Tel: 800/289-9100
Fax: 800/289-9150
International
Tel: 1-559/292-1981
Fax: 1-559/348-1120
ISO9001
Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada
Singapore
Download from Www.Somanuals.com. All Manuals Search And Download.
|