P E A V E Y E L E C T R O N I C S
SPECS
SP™ 115MX
SPECIFICATIONS
Frequency response, 1 meter on-
axis, swept-sine in anechoic
environment:
100 Hz - 14 kHz ( 3 dB)
Usable low frequency limit
(-10 dB point):
66 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak
Sound pressure Level, 1 Watt,
High Frequency Section:
1x .875 in. exit/51mm voice coil
compression driver on CD horn
RX™22 on a CH®-3
1 meter in anechoic environment:
Full Range:
99.0 dB SPL, (2.83 V input)
Low Frequency Section:
100.0 dB SPL, (2.83 V input)
High Frequency Section:
106.0 dB SPL, (2.83 V input)
Recommended active crossover
frequency region and slope:
Low Frequency - High Frequency:
1,600 Hz at 18 dB/octave
Harmonic distortion:
1% rated power
2nd Harmonic:
Time offset:
Low Frequency:
High Frequency:
0.00 ms
0.25 ms
100 Hz:
1 kHz:
0.61%
0.39%
Maximum sound pressure level
(1 meter):
Full Range:
126.0 dB SPL continuous
132.0 dB SPL peak
Low Frequency Section:
127.0 dB SPL continuous
133.0 dB SPL peak
Impedance (Z):
Full Range:
3rd Harmonic:
100 Hz:
1 kHz:
Nominal:
Minimum:
8.0 Ω
6.4 Ω
0.49%
0.39%
Low Frequency:
Nominal:
Minimum:
10% rated power
2nd Harmonic:
8.0 Ω
7.1 Ω
100 Hz:
1 kHz:
1.30%
1.44%
High Frequency:
High Frequency Section:
123.8 dB SPL continuous
129.8 dB SPL peak
Nominal:
Minimum:
8.0 Ω
7.1 Ω
3rd Harmonic:
100 Hz:
1 kHz:
2.80%
0.71%
Input Connections:
Transducer complement:
Low Frequency Section:
1x 15 in. woofer, sealed
1508-8 HE BWX
2x 1/4 in. phone jack and 1x Neutrik®
NL4 Speakon® (bi-amp only)
Crossover frequency (internal
passive):
Low Frequency - High Frequency:
1,350 Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
minimum amplifier headroom of 3 dB.
The nominal radiation geometry shall be
45 degrees in the horizontal plane and 90
degrees in the vertical plane. The outside
dimensions shall be 15.25 inches high by
24.50 inches wide by 16.00 inches deep.
The weight shall be 57 pounds. The
loudspeaker system shall be a Peavey
model SP 115MX.
Architectural & engineering
specifications
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
The loudspeaker system shall have an
operating bandwidth of 100 Hz - 14 kHz.
The nominal output level shall be 99.0 dB
when measured at a distance of one
meter with an input of one Watt. The
nominal impedance shall be 8.0 Ohms.
The maximum continuous power handling
shall be 500 Watts, maximum program
power of 1,000 Watts and a peak power
input of at least 2,000 Watts, with a
Harmonic Distortion : 10% Rated Power
120
110
100
90
80
70
60
50
20
50
100
200
500
1k
2k
5k
10k
20k
Frequency (Hz)
2nd Harmonic
3rd Harmonic
Figure 3
Harmonic Distortion : 1% Rated Power
110
100
90
80
70
60
50
40
20
50
100
200
500
1k
2k
5k
10k
20k
Frequency (Hz)
2nd Harmonic
3rd Harmonic
Figure 4
Download from Www.Somanuals.com. All Manuals Search And Download.
SP™ 115MX INPUT
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301
©2001
Printed in the U.S.A. 5/01
Download from Www.Somanuals.com. All Manuals Search And Download.
|