SPECIFICATIONS
QW™-2
Low frequency section:
98 dB SPL, (2.83 V input)
High frequency section:
110 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full range:
126 dB SPL continuous
132 dB SPL peak
Low frequency section:
126 dB SPL continuous
132 dB SPL peak
High frequency section:
130 dB SPL continuous
136 dB SPL peak
Nominal coverage pattern:
90˚ horizontal x 40˚ vertical
Transducer complement:
Low frequency section:
1 x 15" woofer, vented
1508-8 ALCP ProRider™
High frequency section:
1 x 1.6" exit/100 mm voice coil
compression driver on CD horn
44 XT (w/o adapter) on a
CH®942qt horn
Box tuning frequency:
Low frequency section:
46 Hz
Harmonic distortion:
1% rated power
2nd harmonic:
100 Hz:
1 kHz:
0.25%
0.14%
3rd Harmonic:
100 Hz:
1 kHz:
0.25%
0.32%
Frequency response, 1 meter on-axis,
swept-sine in anechoic environment:
52 Hz to 18 kHz ( 3 dB)
Low frequency section:
600 W continuous
1,200 W program
2,400 W peak
High frequency section:
100 W continuous
200 W program
10% rated power
2nd harmonic:
100 Hz:
1 kHz:
3rd Harmonic:
100 Hz:
0.35%
0.44%
Usable low frequency limit
(-10 dB point):
39 Hz
0.55%
0.35%
1 kHz:
400 W peak
Power handling:
Full range:
Sound pressure level, 1 Watt, 1 meter
in anechoic environment:
Full range:
800 W continuous
1,600 W program
3,200 W peak
97 dB SPL, (2.83 V input)
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
QW™-2
Mounting
The maximum continuous power
handling shall be 800 Watts, maximum
program power of 1,600 Watts and a
peak power input of at least 3,200
Watts, with a minimum amplifier
headroom of 3 dB. The nominal
radiation geometry shall be 90˚ in the
horizontal plane and 40˚ in the vertical
plane. The outside dimensions shall be
33.38" high by 21.13" wide by 22.59"
deep. The weight shall be 98 pounds.
The loudspeaker system shall be a
Peavey model QW-™2.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
This unit is not designed for over head
suspension. Optional flying version
available, contact your Peavey dealer or
rep for details.
Architectural and Engineering
Specifications
The loudspeaker system shall have an
operating bandwidth of 52 Hz to 18 kHz.
The nominal output level shall be 97 dB
when measured at a distance of one
meter with an input of 1 Watt. The
nominal impedance shall be 8 Ohms.
Amplitude Response (1W 1m On-Axis)
110
100
90
80
70
60
20
50
100
200
500
1k
2k
5k
10k
20k
Frequency (Hz)
Figure 1
Impedance
100
50
30
20
Z
( )
10
5
3
2
1
20
50
100
200
500
1k
2k
5k
10k
20k
Frequency (Hz)
Figure 2
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
QW™-2
Harmonic Distortion : 1% Rated Power
120
110
100
90
80
70
60
50
40
20
50
100
200
500
1k
2k
5k
10k
20k
Frequency (Hz)
2nd Harmonic
3rd Harmonic
Harmonic Distortion : 10% Rated Power
130
120
110
100
90
80
70
60
50
20
50
100
200
500
1k
2k
5k
10k
20k
Frequency (Hz)
2nd Harmonic
3rd Harmonic
80304900
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com
©2003 Printed in the U.S.A. 2/03
Download from Www.Somanuals.com. All Manuals Search And Download.
|