SPECIFICATIONS
SP™ 5
Mounting provisions:
This unit is not designed for
overhead suspension
Built-in SA-1 stand-mount adapter
incorporated and four large rubber
feet on bottom for
floor use
Dimensions (H x W x D):
Front:
27.63” x 20.56” x 16.5”
702 mm x 522 mm x 419 mm
Rear:
27.63” x 14.8” x 16.5”
702 mm x 378 mm x 419 mm
Net Weight:
56 lbs. (25.5kg)
Features
• Two-way, full-range sound
reinforcement system
• 15” Scorpion Plus HO woofer
with field-replaceable basket
• Rx22 compression driver with
ferrofluid cooling
• Patented Quadratic Throat
Waveguide™ technology
• Asymmetrical horn aims the
sound down 10˚ (at the
audience, not over their heads)
• 800 Watts program, 1600
Watts peak
Frequency response, 1 meter on-axis,
swept-sine in anechoic environment:
69 Hz to 17 kHz
Transducer complement:
Low frequency section:
1x 15" SP-15825 Scorpion®
Plus HO Woofer
High frequency section:
1x .875" exit /51mm voice coil
RX™ 22 compression driver on an
asymmetrical Quadratic Throat
CD horn
Usable low frequency limit
(-10 dB point):
50 Hz
• Sound Guard™ III tweeter
protection
• Full-range inputs include
a Neutrik Speakon four-pin jack
and two 1/4” phone jacks
• Trapezoidal Baltic birch
enclosure, 25% lighter
than SP 5X
Power handling:
Full range:
400 Watts continuous
800 Watts program
1,600 Watts peak
Box tuning frequency:
Low Frequency Section: 54 Hz
• Stand-mount adapter
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full range:
Crossover frequency
(internal passive):
Low Frequency – High Frequency
1,800 Hz
99.0 dB SPL (2.83 V input)
Maximum sound pressure level
(1 meter):
Full range:
Impedance (Z):
Full Range:
Nominal:
8.0 Ω
5.9 Ω
125 dB SPL continuous
131 dB SPL peak
Minimum:
Input connections:
Radiation angle measured at
-6 dB point of polar response:
90° horizontal by 40° vertical
Full Range: two 1/4” phone jacks
and one Neutrik® four-pin
Speakon® jack
The vertical main polar lobe is
angled down 10° with respect to
straight ahead being +10, -30°
Enclosure materials and finish:
Nine-ply Baltic birch plywood
finished in black carpet
Download from Www.Somanuals.com. All Manuals Search And Download.
distortions vs. frequency are
plotted in figures 3 & 4 for two
power levels. Ten percent (10%) of
rated input power and either one
percent (1%) of rated input power
or 1 Watt, whichever is greater.
Distortion is read from the graph
as the difference between the
fundamental signal (frequency
response) and the desired
handling shall be 400 Watts, with
maximum program power of 800
Watts, peak power input of at
least 1,600 Watts and a minimum
amplifier headroom of 3 dB. The
nominal radiation geometry shall
be 90 degrees symmetrical about
the center axis in the horizontal
plane, and +10, -30 degrees about
the center axis in the vertical
plane. The outside dimensions
shall be 27.63 inches high by 20.56
inches wide by 16.5 inches deep.
The weight shall be 56 lbs. The
loudspeaker system shall be a
Peavey model SP™5.
Frequency Response
This measurement is useful in
determining how accurately a given
unit reproduces an input signal.
The frequency response of the
SP 5 is measured at a distance of
1 meter using a 1 Watt (into the
nominal impedance) swept-sine
input signal. As shown in figure
1, the selected drivers in the
SP 5 combine to give a smooth
frequency response from 69 Hz to
17 kHz.
harmonic. As an example, a
distortion curve that is down 40 dB
from the fundamental is equivalent
to 1% distortion.
Power Handling
Mounting
There are many different
This unit is not designed for
overhead suspension. The
SA-1 stand-mount adapter may be
incorporated, and four large rubber
feet are included on the bottom for
floor use.
approaches to power handling
ratings. Peavey rates this
3 + 2 Year Limited Warranty
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898,
loudspeaker system’s power
handling using a full-range form
of the AES Standard 2-1984. Using
audio band 20 Hz to 20 kHz pink
noise with peaks of four times
the RMS level, this strenuous
test signal assures the user that
every portion of this system can
withstand today’s high technology
music. This rating is contingent
upon having a minimum of 3 dB of
amplifier headroom available.
Architectural & Engineering
Specifications
Meridian, Mississippi 39301-2898.
The loudspeaker system shall have
an operating bandwidth of 69 Hz
to 17 kHz. The nominal output level
shall be 99.0 dB when measured
at a distance of one meter with
an input of 1 Watt. The nominal
impedance shall be 8.0 ohms.
The maximum continuous power
Harmonic Distortion
Second and third harmonic
Harmonic Distortion : 1% Rated Power
Amplitude Response (1W 1m On-Axis)
110
100
90
110
100
90
80
80
70
60
70
50
60
20
50
100
200
500 1k
Frequency (Hz)
2k
5k
10k
20k
40
20
50
100
200
500 1k
Frequency (Hz)
2k
5k
10k
20k
Figure 1
2nd Harmonic
3rd Harmonic
Figure 3
Impedance
Harmonic Distortion : 10% Rated Power
120
110
100
90
100
50
30
20
Z
(
)
10
5
80
3
2
70
60
1
20
50
100
200
500 1k
Frequency (Hz)
2k
5k
10k
20k
50
20
Figure 2
50
100
200
500 1k
Frequency (Hz)
2k
5k
10k
20k
2nd Harmonic
3rd Harmonic
Figure 4
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
SP™ 5
80304985
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • www.peavey.com
©2004 Printed in the U.S.A. 03/04
Download from Www.Somanuals.com. All Manuals Search And Download.
|