Smart-DTA™
ISDN VoIP Telephone Adapter
Quick Start Guide
Important—This is a Class A device and is intended for use in a light industrial environment. It is not
intended nor approved for use in an industrial or residential environment.
Caution—This device is not intended nor approved for connection to the public ISDN telecommuni-
cation network.
Attention—Ce dispositif n'est pas prévu ni approuvé pour le raccordement au réseau de
télécommunication public le RNIS.
Vorsicht—Dieses Gerät ist nicht für Anschaltung an das öffentlich ISDN
Telekommunikationsnetz genehmigt.
Precaución—Este dispositivo no está previsto ni se ha aprobado para la conexión a la red de
telecomunicaciones pública ISDN.
Attenzione—Questo dispositivo non è inteso né non approvato per collegamento alla rete di
telecomunicazione pubblica ISDN.
Document Number: 13228U7-001 Rev. B
Part Number: 07MSDTA-QS
Revised: July 23, 2007
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
2.0 Connect the Smart-DTA to your local network
You must connect the Smart-DTA to an IP network that provides a DHCP server. Using the included black Ethernet
cable, connect the Smart-DTA RJ-45 Ethernet WAN port, labeled ETH (see figure 1), to an Ethernet hub or switch
on the same network as your PC. The Ethernet WAN interface is configured as a DHCP client.
Smart-DTA
DHCP
Server
ETH
port
PC
Ethernet Hub
or Switch
Figure 1. Connecting the Smart-DTA to the network via a hub or switch
Smart-DTA Quick Start Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.0 Connect the Smart-DTA to an ISDN phone
1. Using a straight-though cable, terminated with RJ-45 connectors, connect the BRI port of your Smart-DTA
to the S/T port of your ISDN phone, as shown below:
ISDN
Phone
RJ-45, male
RJ-45, male
3
4
5
6
3
4
5
6
Note: Other pins are not used.
4
Smart-DTA Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4.0 Start the SmartNode Discovery Tool
1. Insert the CD included with your Smart-DTA into the CD drive on your PC.
2. Copy the file named SNDiscovery.exe from the CD to your PC.
3. At your PC, double-click the SNDiscovery.exe file name to activate the tool. The SmartNode Discovery Tool
window will display the IP Address, MAC Address, Device Type (model number) and Build (software
release) of your Smart-DTA.
If your Smart-DTA does not appear:
• Make sure the Smart-DTA and your PC are on the same routed subnet
• Make sure any firewall programs on your PC are disabled
5.0 Access the Web Browser (GUI) Interface
1. In the SmartNode Discovery Tool window, select the line that displays the IP address of your Smart-DTA.
Figure 2. SmartNode Discovery Tool window
Smart-DTA Quick Start Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Right-click the selected line, and select Webbrowser. The Login window will display.
Figure 3. Login window
3. Enter the username administrator. Do not enter a password. Instead simply click OK. Your web browser will
display the Smart-DTA home page.
Figure 4. Smart-DTA home page
6.0 Configuring your Smart-DTA
Once you have logged in you can use the browser-based graphical user interface (GUI) to configure and manage
your S-DTA. The Smart-DTA home page displays three Immediate Actions buttons that allow you to store the cur-
rent configuration state, reload the device, and restore to factory defaults. The home page also displays certain
basic system information. You can always return to the home page by clicking Home in the navigation bar.
6
Smart-DTA Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
The GUI consists of the following main elements:
• The “Navigation Bar” on the left edge presents you with a menu listing giving access to the various configura-
tion and status pages of the Smart-DTA.
• At the top of the page you see the “Current System Path” which displays the location and element currently
presented in the main area.
• The rest of the page displays the configuration and status information for the different features of
the Smart-DTA.
Whenever you modify the configuration your Smart-DTA, immediately applies your
changes.Howver, your new settings ARE NOT PERMANENTLY SAVED (in non-volatile
memory [RAM]). To survive power failure or manual reload you must store your new
settings in non-volatile memory. To save your changes: return to the home page and
press the Save Current Configuration button.
IMPORTANT
7.0 Additional Information
Refer to the Smart-DTA Getting Started Guide located on the CD-ROM shipped with your Smart-DTA device and
• Installing, configuring, operating, and troubleshooting.
• Warranty, trademark & compliance
The CD-ROM also includes many freeware and shareware tools, including TFTP servers, and Telnet clients.
A.0 Customer and Technical Support
Online support: www.patton.com
Telephone support:
• Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to
2200 UTC/GMT)
• Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800
UTC/GMT)
Fax: +1 (253) 663-5693 (USA) or +41 (0)31 985 25 26 (Switzerland)
Smart-DTA Quick Start Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
B.0 Appendix—Factory default IP addresses
Factory default IP addresses and netmask configuration.
IP Address
DHCP Client
192.168.1.1
Network mask
n/a
255.255.255.0
255.255.255.0
WAN interface Ethernet 0 (0/0)
LAN interface Ethernet 1 (0/1)
DHCP server address range (LAN)
192.168.1.10-192.168.1.99
C.0 Compliance Information
C.1 Compliance
EMC Compliance:
• FCC Part 15, Class A
• EN55022, Class A
• EN55024
Safety Compliance:
• IEC 60950-1
• EN60950-1
C.2 Radio and TV interference
The Smart-DTA router generates and uses radio frequency energy, and if not installed and used properly—that
is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and television
reception. The Smart-DTA router have been tested and found to comply with the limits for a Class B computing
device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide rea-
sonable protection from such interference in a commercial installation. However, there is no guarantee that
interference will not occur in a particular installation. If the Smart-DTA router does cause interference to radio or
television reception, which can be determined by disconnecting the unit, the user is encouraged to try to correct
the interference by one or more of the following measures: moving the computing equipment away from the
receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet
(such that the computing equipment and receiver are on different branches).
8
Smart-DTA Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
C.3 EC Declaration of Conformity
(See section C.4 “EG-Konformitätserklärung” for German version.)
Product Description: Smart-DTA
The products described above in the form as delivered are in conformity with the provisions of the following
European Directive:
R&TTE Directive 1999/5/EC
Guidelines of the European Parliament and the Committee for the Harmonization of the Legal Regu-
lations of the Member States concerning radio equipment and telecommunications terminal equip-
ment and the mutual recognition of their conformity.
The safety advice in the documentation accompanying the products shall be obeyed.
The conformity to the above directive is indicated by the CE sign on the device.
The signed Declaration of Conformity can be downloaded from www.patton.com/certifications/.
C.4 EG-Konformitätserklärung
(see section C.3 “EC Declaration of Conformity” for English version)
Produktbezeichnung: Smart-DTA
Die bezeichneten Produkte stimmen in der von uns in Verkehr gebrachten Ausführung mit den Vorschriften fol-
gender Richtlinie überein:
R&TTE 1999/5/EG
Richtlinie des europäischen Parlaments und des Rates zur Angleichung der Rechtsvorschriften der
Mitgliedstaaten über Funkanlagen und Telekommunikations-Endeinrichtungen und die gegenseitige
Anerkennung ihrer Konformität.
Die Sicherheitshinweise in der mitgelieferten Produktdokumentation sind zu beachten.
Die Konformität mit der oben erwähnten Richtlinie wird durch das CE-Zeichen auf dem
Gerät bestätigt.
certifications/.
C.5 Authorized European Representative
D R M Green, European Compliance Services Limited.
Oakdene House, Oak Road , Watchfield, Swindon, Wilts SN6 8TD, UK
Smart-DTA Quick Start Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
10
Smart-DTA Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
Smart-DTA Quick Start Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright statement
Copyright © 2007, Patton Electronics Company. All rights reserved.
The information in this document is subject to change without notice. Patton Electronics assumes no
liability for errors that may appear in this document.
Trademarks statement
The term Smart-DTA is a trademark of Patton Electronics Company. All other trademarks presented in this docu-
ment are the property of their respective owners.
Warranty
For warranty information, refer to the Smart-DTA Getting Started Guide located on the CD-ROM that came with
In accordance with the requirements of council directive 2002/96/EC on Waste of
Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate
this product from other waste and scrap and deliver to the WEEE collection system in
your country for recycling.
12
Smart-DTA Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|