PYLE Audio CD Player PICL48 User Manual

WARNING  
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR  
MOISTURE.  
THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND  
THAT NO OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON  
APPARATUS.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
iPhone/iPod FM Radio Receiver with CD  
Player & Alarm Clock  
Warning: To reduce the rise of  
The exclamation point within  
The lightning flash with  
arrowhead symbol, within an  
electric shock, do not remove  
an equilateral triangle is  
intended to alert the user to  
the presence of important  
operating and maintenance  
(servicing) instructions in the  
literature accompanying the  
appliance.  
cover  
(or  
back)  
no  
equilateral  
triangle,  
is  
user-serviceable parts inside.  
Refer servicing to qualified service  
personnel.  
intended to alert the user to  
the presence of uninsulated  
“dangerous voltage” within  
the products enclosure that  
Model : PICL48  
may  
be  
of  
sufficient  
magnitude to constitute a risk  
of electric shock to persons.  
IMPORTANT SAFETY INSTRUCTIONS  
1)  
2)  
3)  
4)  
5)  
6)  
7)  
8)  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9)  
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding type plug has two blades and a third grounding  
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not  
fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
Note: Please read and follow these instructions before using your unit.  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE UNIT TO POWER  
LOCATION OF CONTROLS  
Plug one end of the AC/DC adaptor into the DC-In jack, and then plug the other end into AC wall outlet.  
Before switching on the unit, make sure that the voltage of your electricity supply is the same as that  
indicated on the rating plate.  
Backu-up Battery  
Open the battery door located at the bottom of the unit, insert 2 pcs. ‘AAA’ size (UM-4) batteries with  
battery polarities same as shown inside the battery compartment.  
In case of AC power outage or interrupted AC power, the current time, alarm time settings and the  
stored radio stations are preserved in the memory of the unit.  
Important: When the unit is not use for 3 days or more and also the unit is not connect to AC power  
during that time, please remove the battery to avoid damage to the set from leakage of battery.  
SETTING THE TIME  
Before starting to set the time, make sure that the unit is in POWER OFF Mode .  
If you have iPod (Except iPod Shuffle) or iPhone  
1.) Dock in the iPod/iPhone on the 30 pins Connector  
2.) Press the ‘PLAY/PAUSE/SYNC’ button for a few seconds until the display will show SYNC with  
flashing, then the unit will synchronize the time same as the iPod/iPhone’s automatically.  
If you do not have any iPod/iPhone units  
1.) Press and hold the ‘FUNC/CL ADJ’ button for a few seconds, the hour digit in the display will start  
flashing.  
2.) Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button to adjust the hour.  
3.) When the correct hour is selected, press the ‘FUNC/CL.ADJ’ button again to enter the minute mode  
with minute digit flashing.  
4.) Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button to adjust the minute.  
5.) When the correct time is selected, press the ‘FUNC/CL ADJ’ button to store the time in the memory.  
SETTING THE ALARM TIME  
Before starting to set the alarm time, make sure that the unit is in POWER OFF mode.  
1.) Press the ‘MEM+/AL1’ or ‘MEM/AL2’ button once (You can also use the ‘AL1’ or ‘AL2’ button on the  
remote control) and the AL1 or AL2 icon will appear in the display.  
2.) Press the ‘FUNC/CL. ADJ.’ button to select the alarm wake up source. You can choose buzzer,  
iPod/iPhone, Radio or CD.  
3.) Press and hold the ‘MEM+/AL1’ or ‘MEM/AL2’ button for a few seconds, the alarm hour digit will  
begin flashing.  
4.) Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button to adjust the alarm hour.  
5.) When the desired alarm hour is selected, press the ‘MEM+/AL1’ or ‘MEM/AL2’ button again, the  
alarm minute digit will begin flashing.  
1
2
Adjustable Dock Dial  
iPod/iPhone Connector  
Speaker  
11  
12  
13  
14  
15  
16  
17  
18  
19  
Program/Memory/Alarm2 Button  
Volume + Button  
Volume - Button  
Open CD Door Button  
Remote Sensor  
Display  
3
4
CD Compartment  
5
Power/Alarm Off Button  
Function/Clock Adjust Button  
Play/Pause/Sync Button  
Skip-/Tune- Button  
6
6.) Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button to adjust the alarm minute.  
7.) When the desired alarm time is selected, press the ‘MEM+/AL1’ or ‘MEM/AL2’ button again to  
confirm.  
7
DC In Jack  
8
FM Antenna  
9
Skip+/Tune+ Button  
Stop/Memory+/Alarm1 Button  
Aux-In Jack  
10  
Note : If you choose iPod/iPhone or CD as the alarm wake up source, please make sure that you  
havehave the iPod/iPhone or CD in place.  
- 5 -  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURN OFF THE ALARM  
CD OPERATION  
1. Press the ‘POWER/AL OFF’ button to turn on the unit.  
2. Press the ‘FUNC/CL.ADJ’ button to select the CD mode.  
3. Insert a CD disc in the CD compartment and close the CD door, the unit will start reading the disc, it  
will play the first track of the entire disc after reading.  
4. Press ‘VOL+’ or ‘VOL-‘ button to adjust the volume to the desired listening level.  
5. During playing, press the ‘PLAY/PAUSE/SYNC’ button to temporarily pause playing. To resume,  
press the ‘PLAY/PAUSE/SYNC’ button again.  
When the alarm activate, press the ‘POWER/AL.OFF’ button to turn off the alarm.  
SNOOZE FUNCTION  
1. Whenever the alarm activate, it can be temporarily suspended for a short period of 10  
minutes by pressing the ‘SLEEP/SNOOZE’ button on the remote control.  
2. The alarm will then automatically activate again after the 10 minutes SNOOZE period has  
ended.  
6. To stop playing, press the ‘STOP/MEM+/AL1’ button on the unit or the ‘STOP’ button on the remote  
control.  
3. This procedure can be repeated for up to approximately one hour.  
RADIO OPERATION  
Skip Mode  
1. Press the ‘POWER/AL OFF’ button to turn on the unit.  
1. During play or pause mode, press the ‘SKIP+/TUNE+’ button to go to the next track.  
2. During play, press the ‘SKIP-/TUNE-‘ button once to go back to the beginning of the track. Press the  
‘SKIP-/TUNE-‘ button twice to go back to the previous track.  
2. Press the ‘FUNC/CL.ADJ’ button to select the FM RADIO mode.  
3. Press and hold the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button for approx. 1 second, it will start  
to search the next radio station in the direction of the search. The search operation simply  
finds stations with strong signals. Stations with weak signal can only be tuned in manually.  
4. Press the ‘P-MODE/MONO’ button on the remote control to select stereo or mono  
broadcasting.  
3. In pause mode, press the ‘SKIP-/TUNE-‘ button to go back to the previous track.  
Search Mode  
1. Press and hold the ‘SKIP+/TUNE+’ or ‘SKIP-/TUNE-‘ button to quickly advance or reverse through  
the track at high speed.  
2. Release the button to return to normal play.  
5. Press ‘VOL+’ or ‘VOL-‘ button to adjust the volume to the desired listening level.  
Different Play Mode  
SAVING RADIO STATIONS IN THE MEMORY  
Press the ‘P-MODE/MONO’ button on the remote control to select different kinds of play mode with the  
following sequence.  
1. Tune to the desired stations.  
2. Press the ‘PROG/MEM/AL2’ button on the unit or the ‘MEM’ button on the remote control, the  
display will show the next memory station number flashing.  
3. Press the ‘TUNE+/SKIP+’ or ‘TUNE-/SKIP-‘ button on the unit or the ‘M+’ or ‘M-‘ button on the  
remote control to select memory number, then press ‘PROG/MEM/AL2’ button to store the  
station into the memory.  
Repeat Repeat All Random Normal  
REPEAT - the track being played and will repeat continuously.  
REPEAT ALL - the whole disc will repeat continuously.  
4. Repeat step 1 to 3 to store more radio stations in the memory.  
5. Up to maximum 20 radio stations can be stored in the memory.  
RANDOM – the tracks in the disc will be played in random sequence.  
Programming  
The programming should be done in STOP mode  
1. Press the ‘PROG/MEM/AL2‘ on the unit or ‘PROG’ button on the remote control, LCD display will  
show ‘ 1 : - - ‘ with ‘ - - ‘ flash continuously.  
2. Use the “SKIP+/TUNE+” or “SKIP-/TUNE-“ button to select the desired track.  
3. Press the “PROG/MEM/AL2‘ on the unit or ‘PROG’ button on the remote control again to store the  
selected track in the memory, the LCD display will show ‘ 2 : - - ‘ and flash continuously.  
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the  
memory.  
TO SELECT A STORED RADIO STATION IN THE MEMORY  
Use the ‘STOP/MEM+/AL2’ button on the unit or the ‘M+’ or ‘M-‘ button on the remote control to  
select the stored radio station.  
Press the ‘STOP/MEM+/AL2’ on the unit or the ‘M+’ button on the remote to go to the next station  
in the memory.  
Press the ‘M-‘ button on the remote control to go back to the previous station in the memory.  
5. Press the ‘PLAY/PAUSE/SYNC’ button to start playing the disc in the programmed order.  
6. To stop playing, press the ‘STOP’ button.  
7. To cancel the programming list, press the ‘STOP’ button till the ‘STOP’ disappear from the LCD  
display or select a different function RADIO, AUX or iPOD/iPHONE.  
- 6 -  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LISTEN TO iPOD/iPHONE WITH DOCKING CONNECTOR  
SLEEP TO MUSIC FUNCTION  
1. This function can only operate by remote control.  
Warning : Turn off your iPod or iPhone before docking on the unit  
2. This function allows you to listen to the radio, iPhone/iPod or CD while you fall asleep.  
3. Press the ‘SLEEP/SNOOZE’ button on the remote control, the display will show the default sleep  
time of 90 minutes. Press the ‘SLEEP/SNOOZE’ button again to select the sleep time with  
decrement of 10 minutes.  
4. When the correct sleep time is selected, stop pressing the ‘SLEEP/SNOOZE’ button, the unit will go  
to the sleep mode in about 5 seconds with SLEEP appear in the display.  
5. Now you can enjoy listening to the selected music for the pre-set period of sleep time.  
6. After this pre-set time has elapsed, the unit will switch off automatically.  
1. Press the ‘POWER/AL OFF’ button to turn on the unit.  
2. Press the ‘FUNC/CL.ADJ’ button to select the iPod mode.  
3. Turn the ADJUSTABLE DOCK DIAL to the depth that fit your iPod/iPhone best.  
4. Connect the iPod or iPhone to the docking connector, the iPod or iPhone will start playing.  
5. Press the ‘VOL+’ or ‘VOL-‘ button to your desired listening level.  
6. During playing or in pause mode, press the ‘SKIP+/TUNE+’ button to go to the next track.  
7. During playing, press the ‘SKIP-/TUNE-‘ button once to go back to the beginning of the track.  
Press the ‘SKIP-/TUNE-‘ button twice to go back to the previous track.  
8. In pause mode, press the ‘SKIP-/TUNE-‘ button once to go back to the previous track.  
9. Press the ‘PLAY/PAUSE/SYNC’ button to temporarily pause playing. To resume, press the  
‘PLAY/PAUSE/SYNC’ button again.  
REMOTE CONTROL OPERATION  
Take off the plastic sheet located at the battery compartment tray to activate the remote control.  
Point the remote control at the remote sensor on the main unit and press the function button to activate  
the function.  
Operates the IPod/iPhone with the Remote Control  
MENU Button – Use this button to go to the Menu Page of the iPod or iPhone.  
UP Button – Use this button to scroll up the selection in the Menu.  
DN Button – Use this button to scroll down the selection in the Menu.  
ENTER Button – Use this button to confirm the selection.  
PLAY/PAUSE Button – Use this button to pause playing or resume playing.  
STOP Button – Use this button to stop playing.  
SKIP-/TUNE- Button – Use this button to go back to the beginning of the track or to the previous  
track.  
SKIP+/TUNE+ Button – Use this button to go to the next track.  
Warning : Please make sure that your iPod or iPhone is properly docked into the unit. Failure to  
do so may damage your iPod.  
Charging your iPod  
While your iPod or iPhone is docked in the unit and the unit is connected to AC power, your iPod  
or iPhone will recharge until your iPod or iPhone is fully charged.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
POWER/AL.OFF Button  
MENU Button  
12.  
13.  
14.  
15.  
16.  
17.  
18.  
19.  
20.  
21.  
AL2 Button  
PROGRAM Button  
P-MODE/MONO Button  
SLEEP/SNOOZE Button  
MUTE Button  
AUX-IN CONNECTION  
PLAY/PAUSE/SYNC Button  
STOP Button  
1. Press the ‘POWER/AL OFF’ button to turn on the unit.  
2. Press the ‘FUNC/CL.ADJ.’ button to select the AUX mode.  
3. Insert one side of the audio cable into the Line-Out or Phone Jack on your MP3 Player or  
audio device and the other side into the AUX-IN jack of the unit.  
4. Turn on your MP3 player or audio device and follow its playback instructions.  
ENTER Button  
SKIP+/TUNE+ Button  
SKIP-/TUNE- Button  
FUNC./CL.ADJ Button  
UP Button  
VOLUME - Button  
VOLUME + Button  
MEMORY - Button  
MEMORY + Button  
MEM Button  
MUTE FUNCTION  
10. DOWN Button  
11. AL1 Button  
This function can only operate by remote control.  
Press the MUTE button on the remote control to mute the unit, press the MUTE button again to  
cancel the function.  
- 9 -  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
Always turn off the unit after use.  
Keep the unit away from magnetic objects, water or heat sources.  
Use a clean soft cloth moistened with lukewarm water to clean the cabinet. Never use  
chemical cleaners that could damage the finish of the unit.  
Never touch the CD pickup and lens. If fingerprints get on the pickup lens, clean it gently with  
a commercial lens cleaner.  
Disconnect the unit from any power sources before cleaning.  
To remove a disc from its storage case, press down on the centre of the case and lift the disc  
out, holding it carefully by the edges.  
Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft  
cloth. Unlike conventional records, compact discs have no grooves to collect dust and  
microscopic debris so gently wiping with a soft cloth should remove most particles. Wipe in a  
straight line from the inside to the outside of the disc. Small dust particles and light stains will  
have absolutely no effect on reproduction quality.  
Never use chemicals such as record sprays, anti-static sprays, benzene or thinners to clean  
compact discs. These chemicals can irreparably damage the disc’s surface.  
Discs should be returned to their cases after use. This avoids serious scratches that could  
cause the Laser pickup to skip.  
Do not expose discs to direct sunlight, high humidity, or high temperatures for extended  
periods. Long exposure to high temperatures can warp the disc.  
Do not stick paper or write anything with a ballpoint pen on the label side of the disc.  
SPECIFICATIONS  
Frequency Range:  
FM 88 – 108 MHz  
Power Supply:  
AC 100V to 240V ~ 50/60Hz  
DC Adaptor : 7.5V  
2 pcs. UM-4 ‘AAA’ size  
1 pc. CR-2025  
1.5A  
Back-Up Battery :  
Remote Control Battery :  
Specifications are subject to change without further notice.  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Baby Accessories SC940 User Manual
Philips Baby Monitor SCD590 User Manual
Philips Cassette Player AQ4140 98 User Manual
Philips Home Theater System MCD300 User Manual
Philips Universal Remote sru3004wm 17 User Manual
Poulan Snow Blower 422078 User Manual
PQI Computer Drive Pro 220 User Manual
Precision Trading Network Card USB Throttle Quadrant Console User Manual
ProScan Refrigerator FRW041 User Manual
PYLE Audio Music Mixer PDCDJ400 User Manual