PNY Network Card P NSA2 EC RF User Manual

eSATA II 2 Port ExpressCard  
User Manual  
Model P-NSA2-EC-RF  
Ver. 1.0  
All brand names and trademarks are properties of their  
Respective owners.  
Aug/07  
1
MN7036400002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Description  
Hardware Installation  
1. Insert the Card into the ExpressCard slot of your system.  
2. Make sure the card is securely inserted.  
Aug/07  
3
MN7036400002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Driver Installation  
For Windows® XP/Server 2003  
1. At the Found New Hardware Wizard:  
XP(w/SP1 or earlier)/Server 2003: continue to step #2  
XP(w/SP2 or later)/Server 2003(w/SP1 or later): select No, not  
this time, then click Next.  
2. Please insert the provided driver CD into your CD-ROM Drive,  
select Install the software automatically (Recommended), and  
click Next.  
3. Accept the default entry, then click Next.  
4. Click Finish.  
5. Restart Windows to complete the installation.  
For Windows® Vista  
1. At the Found New Hardware Wizard window pop-up, please  
select Locate and install drier software (recommended) to start  
the installation.  
2. Please insert the provided driver CD into your CD-ROM Drive.  
3. Click on Close to complete the driver installation.  
4. Restart Windows to complete the installation.  
Aug/07  
4
MN7036400002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Windows® 2000  
1. At the Found New Hardware Wizard, click Next.  
2. Select Search for  
a
suitable driver for my device  
(recommended), then click Next.  
3. Please insert the provided driver CD into your CD-ROM Drive,  
check CD-ROM drives, uncheck the other boxes, click Next,  
then click Next again.  
4. If the Digital Signature Not Found message appears, click Yes.  
Our driver has been thoroughly tested for stability and  
compatibility.  
5. Click Next, then Finish.  
6. Restart Windows to complete the installation.  
To Verify Windows® Installation  
1. Right click My Computer and click Manage.  
2. Select Device Manager.  
3. Double click SCSI and RAID Controller, then double click  
Silicon Image SiI 3132 SATALink Controller to display driver  
properties. A message this device is working properly is  
Aug/07  
5
MN7036400002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
displayed in the dialog box, the driver has been correctly installed.  
Hot-Plugging Hard Disk Drives  
To remove a drive from a powered up system, do the following:  
1. Right click My Computer and click Manage.  
2. Select Device Manager.  
3. Click Disk Drives, right click the target disk and select  
Disable/Enable.  
4. You can now remove the target disk.  
1 Year Warranty  
Free Technical Support: 1-800-234-4597  
Aug/07  
6
MN7036400002  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Car Video System C2937M C User Manual
Pentax Digital Camera Optio 43WR User Manual
Phase Technology Speaker Cinemicro One User Manual
Philips Baby Accessories SCF640 42 User Manual
Philips Flat Panel Television TP3297B1 User Manual
Philips Recording Equipment HQ9170 User Manual
Planet Technology Switch SGSW 4802 User Manual
Polaris Offroad Vehicle Sportsman 500 EFI User Manual
Pride Mobility Portable Stereo System INFMANU3210 User Manual
ProForm Treadmill 831294251 User Manual