Phoenix Series
Loudspeaker
User Instructions
Safety First
The Electro-Voice® PX1122M, PX1152M, PX2122, and PX2152 have threaded points that can be used for suspension.
Please consult the user instructions that are supplied with the suspension kits for proper use prior to installation.
WARNING: Suspending any object is potentially dangerous and should only be attempted by individuals who have a
thorough knowledge of the techniques and regulations of rigging objects overhead. Electro-Voice® strongly
recommends that all speakers be suspended taking into account all current national, federal, state and local regulations.
It is the responsibility of the installer to ensure that all speakers are safely installed in accordance with all such
regulations. If Phoenix speakers are suspended, Electro-Voice® strongly recommends that the system be inspected at
least once a year. If any sign of weakness or damage is detected, remedial action should be taken immediately. Any
hardware used to suspend a Phoenix speaker that is not associated with Electro-Voice® is the responsibility of others.
Ground Stack:
When using multiple Electro-Voice® Phoenix speakers
in a ground stack configuration, the feet of each
enclosure is designed to fit into grooves of the enclosure
below it. This is both for the safety of the ground stack
and serves as an alignment for properly arraying multiple
loudspeakers. Always check that the feet are resting in
the grooves when using multiple speakers (Figure 1).
Unless you can safely lift the weight of the loudspeaker
Foot on Bottom
of Second
Enclosure
on to the ground stack, have another person to help you
place it. The ground stack should be placed on a solid,
Groove on Top
of First
level surface. When using subs on a surface that is hard
or slick, use a piece of carpet or other material between
the feet and supporting surface to prevent the subs (and
stacks) from “walking”. When using a ground stack in
windy outdoor conditions, when the surface is slippery, or
Enclosure
when
in
adverse
conditions,
Electro-Voice®
recommends using a ratchet strap to secure the
speakers. For a complete list of the configurations
possible with an Electro-Voice® Phoenix system, please
Figure 1: Groundstacking Configuration
Stand Mount:
The Electro-Voice® PX1122M and PX1152M include 1-3/8" stand mounts for use with tripod stands. Check the
specifications of the speaker stand to be certain it is capable of supporting the weight of the speaker. Place the speaker
stand on a flat, stable surface and be sure to fully extend the legs of the stand. Do not try to make the stand “taller” and
compromise its structural integrity. Do not attempt to suspend more than one speaker on a stand designed for a single
speaker. Unless you are confident that you can safely handle lifting the weight of the speaker onto the stand, ask another
person to help you place it. Route cables and position the stand so that performers, production crew and audience
members will not trip over the stand or cables and pull the speaker system over. Secure the cables with wire ties or tape
whenever possible.
Moisture:
Electro-Voice® does not recommend using Phoenix loudspeakers in the rain or in high moisture environments without
protection.
Hearing Exposure:
Electro-Voice® Phoenix loudspeakers are capable of producing sound pressure levels sufficient to produce permanent
hearing damage. Caution should be taken to avoid prolonged exposure to sound pressure levels exceeding 90 dB.
Processor Settings:
Processor settings for Phoenix loudspeaker configurations are available for Electro-Voice® speaker processors. Please
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications:
PX1122M
PX1152M
PX2122
PX2152
PX2181
Freq. Response1 (-3 dB):
Freq. Range1 (-10 dB):
Rec. Hipass Frequency:
Axial Sensitivity1:
Max Calculated SPL1:
Horizontal Coverage:
Vertical Coverage:
70 Hz - 15 kHz
55 Hz - 19 kHz
50 Hz
TBA
TBA
TBA
TBA
TBA
90 Hz - 11 kHz
70 Hz - 18 kHz
80 Hz
60 Hz - 11 kHz
50 Hz - 18 kHz
40 Hz
45 Hz - 160 Hz
40 Hz - 180 Hz
35 Hz
98 dB (1W/1m)
132 dB
102 dB (1W/1m)
101 dB (1W/1m)
105 dB (1W/1m)
141 dB
138 dB
90°
45°
30°, or 45°
45°, or 30°
60°, or 45°
45°, or 60°
Omnidirectional
Omnidirectional
Power Handling
(Passive):
1200W Continuous, 4800W
Peak
600W Continuous, 2400W Peak
500W Continuous, 2000W Peak
N/A
N/A
LF Power Handling
(Biamp):
1000W Continuous, 4000W Peak
HF Power Handling
(Biamp):
80W Continuous, 320W Peak
N/A
(1) DVX3121, 12 in.
(305 mm) Driver
(2) DVX3121, 12 in.
(305 mm) Driver
(2) DVX3150, 15 in.
(381 mm) Driver
(2) DVX3180, 18 in.
(457 mm) Driver
LF Transducer:
TBA
HF Transducers:
Crossover Frequency:
Impedance (Passive):
LF Impedance (Biamp):
HF Impedance (Biamp):
Connectors:
(2) ND2-16, 2 in. (50mm) Diaphragm Compression Drivers
1400 Hz
TBA
1600 Hz
N/A
1900Hz
80 Hz - 125 Hz
N/A
8 Ohms Nominal
4 Ohms Nominal
4 Ohms Nominal
8 Ohms Nominal
8 Ohms Nominal
N/A
N/A
(3) Neutrik Speakon NL4's
(2) Neutrik Speakon NL4's
Enclosure Material:
Suspension:
18mm Plywood with Black EVCoatTM
Rigging Point for PX-SAM Strong-Arm Accessory
(8) M10 Points - (6) on Top and (2) on Bottom of Enclosure
Grille:
Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo
546mm x 366mm x 305mm
(21.50" x 14.42" x 12.04")
1219mm x 457mm x 445mm
(48.00" x 18.00" x 17.50")
1219mm x 569mm x 758mm
(48.00" x 22.42" x 29.85")
Dim (H x W x D):
TBA
Net Weight:
Shipping Weight:
23.1 kg (51 lbs)
25.2 kg (56 lbs)
TBA
TBA
50.9 kg (112 lbs)
53.1 kg (117 lbs)
45.6 kg (100.5 lbs)
47.9 kg (105.5 lbs)
88.5 kg (195 lbs)
90.7 kg (200 lbs)
Recommended Amplifier:
Electro-Voice® CP3000S
Electro-Voice® CP4000S
PX-D1 Dolly Kit
Accessories:
PX-SAM Strong-Arm Kit
PX-G1 Phoenix Grid
EBK-M10 Eyebolt Kit
PX-D2 Dolly Kit
1 Half Space measurement.
U.S.A. and Canada only. For customer orders,
contact the Customer Service department at
800/392-3497 Fax: 800/955-6831
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
Europe, Africa and Middle East only. For customer orders,
contact the Customer Service department at
49 9421-706 0 Fax: 49 9421-706 265
© Telex Communications, Inc. 6/2006
Part Number 38110-533 Rev 2
For warranty information, contact the Service Repair department at:
616/695-6831 or 800/685-2606
For technical assistance, contact Technical Support at:
866/78AUDIO
Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|