FrameSaverR SLV 9128
Quick Reference
Document Number 9128-A2-GL10-40
May 2000
Product Documentation on the World Wide Web
We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.
Select Library → Technical Manuals → FrameSaver Frame Relay Devices.
Select the following document:
9128-A2-GB20
FrameSaver SLV 9126/9128 User’s Guide
To request a paper copy of a Paradyne document:
H
Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)
Outside the U.S.A., call 1-727-530-8623
H
Getting Started
If you have not yet installed and set up the FrameSaver SLV unit, do so now. Refer to
the installation instructions that came with the unit.
H
H
FrameSaver SLV 9128 1-Slot Unit Installation Instructions
(Document No. 9128-A2-GN10)
FrameSaver SLV 9128 Network Access Module (NAM) Installation Instructions
(Document No. 9128-A2-GN11)
Before starting to use the FrameSaver SLV unit, it is recommended that you download
the User’s Guide so you have access to information about the unit, then print chapters
or sections you may want to reference.
Menu Hierarchy
The Menu Hierarchy shows a pictorial view of the organization of the FrameSaver unit’s
screens, which can help you navigate the menus and access information.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN MENU
Status
Test
Configuration
Auto-Configuration
Control
Auto-Configuration
• Frame Relay Discovery Mode
• Automatic Circuit Removal
• Automatic Backup
Easy Install
MAIN MENU
Status
Configuration
Test
Configuration
Auto-Configuration
Control
Control
Modem Call Directories
System Information
Easy Install
Administer Logins
Change Operating Mode
Select Software Release
Select DSX/PR1 LED Source
LMI Packet Capture Utility
Disconnect Modem
Reset Device
System Information
Administer Logins
Select Software Release
LMI Packet Capture Utility
• Device Name
• System Name,
Location, Contact
• Date
• Login ID
• Password
• Access Level
• Current Release
• Alternate Release
• Switch & Reset
• Capture Interface
• Packet Capture Start/Stop
• Status
• Packets in Buffer
• Display LMI Trace Log
• Time
New
Login Entry
LMI Trace Log
MAIN MENU
Status
Test
Configuration
Auto-Configuration
Control
Easy Install
Easy Install
•
•
•
•
•
Node IP Address and Subnet Mask
TS Access
Create Dedicated Network Management Link
Time Slot Assignment Screen
Selected Network Physical Interface Options
00-16728b
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Option Summaries
This section summarizes the configuration options accessed when you select
Configuration from the Main Menu.
H
H
H
H
H
System
Physical (Network, Data Port, and ISDN)
ISDN (Link Profiles)
DSX-1
Time Slot Assignment
— Frame Relay Network Assignments
— DSX-1 to Network Assignments
— Sync Data Port Assignments
Frame Relay (Network and Data Port)
DLCI Records (Network, Data Port, and ISDN)
PVC Connections
H
H
H
H
H
Management and Communication
Auto Backup Criteria
System
Select System Options to configure options applicable to the entire system.
H
H
H
Frame Relay and LMI
Service Level Verification
General
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame Relay and LMI
Select Frame Relay and LMI to configure the general frame relay options for the
system.
Frame Relay and LMI
Configuration Option
Settings
Default in [Bold]
LMI Behavior
[Independent],
Port-1_Follows_Net1-FR1,
Port-2_Follows_Net1-FR1,
All_Ports_Follow_Net1-FR1
Net1-FR1_Follows_Port-1,
Net1-FR1_Follows_Port-2,
Port-1_Codependent_with_Net1-FR1,
Port-2_Codependent_with_Net1-FR1
Traffic Policing
Enable, [Disable]
LMI Error Event (N2)
LMI Clearing Event (N3)
LMI Status Enquiry (N1)
LMI Heartbeat (T1)
1, 2, [3], 4, 5, 6, 7, 8, 9, 10
[1], 2, 3, 4, 5, 6, 7, 8, 9, 10
1, 2, 3, 4, 5, [6], . . . 255
5, [10], 15, 20, 25, 30
5, 10, [15], 20, 25, 30
LMI Inbound Heartbeat (T2)
LMI N4 Measurement Period (T3) 5, 10, 15, [20], 25, 30
Service Level Verification
Select Service Level Verification to configure the SLV options for the system.
Service Level Verification
Configuration Option
SLV Sample Interval (secs)
SLV Delivery Ratio
Settings
Default in [Bold]
10–3600 [60]
Enable, [Disable]
Enable, [Disable]
1, 2, [3], . . . 20
DLCI Down on SLV Timeout
SLV Timeout Error Event
Threshold
SLV Timeout Clearing Event
Threshold
[1], 2, 3, . . . 20
SLV Packet Size (bytes)
SLV Synchronization Role
[64]–2048
[Tributary], Controller, None
5
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Select General to configure a timeout period and duration for user-initiated loopbacks
and pattern tests, a primary and secondary clock source for the system, and a system
alarm relay.
General
Configuration Option
Test Timeout
Settings
Default in [Bold]
[Enable], Disable
1–120 [10]
Test Duration (min)
Primary Clock Source
Secondary Clock Source
System Alarm Relay
[Net1], DSX, Internal, DBM
Net1, DSX, [Internal], DBM
Enable, [Disable]
Physical
Select Physical to configure the physical characteristics of each interface:
H
H
H
Network
Data Ports
ISDN
Network
Select Network, then Physical to configure physical characteristics for the T1 network
interface.
Network
Configuration Option
Line Framing Format
Line Coding Format
Line Build Out (LBO)
Bit Stuffing
Settings
Default in [Bold]
D4, [ESF]
AMI, [B8ZS]
[0.0], –7.5, –15, –22.5
[62411], Disable
[System], Interface
[Enable], Disable
[Enable], Disable
Disable, [V.54_&_ANSI]
Enable, [Disable]
Transmit Timing
Network Initiated LLB
Network Initiated PLB
Network Initiated DCLB
ANSI Performance Report
Messages
Excessive Error Rate Threshold
Circuit Identifier
[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
Text Field, [Clear]
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Data Ports
Select Data Ports, then Physical to configure physical characteristics for the port
connected to the DTE.
Data Ports
Configuration Option
Settings
Default in [Bold]
Port Status
[Enable], Disable
Port Use (Port-2 only) [Frame Relay], Synchronous Data
For Port-1 or when Port Use is set to Frame Relay on Port-2:
Max Port Rate (Kbps)
[1536], 2048
(Port-2 only)
Invert Transmit Clock
[Auto], Enable, Disable
[Internal], External
[Enable], Disable
Transmit Clock Source
Monitor DTR
Monitor RTS (Control)
Port (DTE) Initiated Loopback
[Enable], Disable
[Disable], Local, Both
When Port Use is set to Synchronous Data on Port-2:
Port Base Rate (Kbps)
Invert Transmit Clock
Transmit Clock Source
Monitor DTR
[Nx64], Nx56
[Auto], Enable, Disable
[Internal], External
[Enable], Disable
Monitor RTS (Control)
Port (DTE) Initiated Loopback
[Enable], Disable
[Disable], DTPLB, DCLB, Both
Invert Transmit and Receive Data Enable, [Disable]
Action on Network Yellow Alarm
None, [Halt]
Network Initiated
[Disable], V.54, ANSI_FT1, V.54_&_ANSI
Data Channel Loopback
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ISDN
Select ISDN, then Physical to configure physical characteristics for the ISDN interface if
an ISDN DBM is installed.
The following table shows the configuration options for an ISDN BRI DBM.
ISDN BRI
Configuration Option
Interface Status
Settings
Default in [Bold]
Enable, [Disable]
[Originate], Answer
[Clear] (3–20 digits)
[Clear] (up to 10 digits)
Originate or Answer
Service Profile ID 1 or 2 (SPID)
Local Phone Number 1 or 2
The following table shows the configuration options for an ISDN PRI DBM.
ISDN PRI
Configuration Option
Interface Status
Settings
Default in [Bold]
Enable, [Disable]
Originate, [Answer]
[NI-2], ATT_4ESS, ATT_5ESS
[Clear] (up to 10 digits)
D4, [ESF]
Originate or Answer
Switch Type
Local Phone Number
Line Framing Format
Line Build Out (LBO)
Network Initiated LLB
Network Initiated PLB
[0.0], –7.5, –15, –22.5
[Enable], Disable
[Enable], Disable
Enable, [Disable]
ANSI Performance Report
Messages
Excessive Error Rate Threshold
Circuit Identifier
[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
Text Field, [Clear]
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ISDN Link Profiles
Select ISDN, then Link Profiles to configure the ISDN Link Profiles.
Link Profiles
Configuration Option
Link Name
Settings
Default in [Bold]
ASCII text entry, [HQ_Site]
Auto, [Disable]
Link Status
Outbound Phone Number
Inbound Calling ID 1 or 2
Maximum Link Rate (Kbps)
0–9, *, #, <space>, _, –, ), or (
0–9
BRI DBM: [64], 128
PRI DBM: [64], 128, . . . 1472
DSX-1
Select DSX-1 to configure the DSX-1 interface.
DSX-1
Configuration Option
Interface Status
Settings
Default in [Bold]
Enable, [Disable]
D4, [ESF]
Line Framing Format
Line Coding Format
Line Equalization
AMI, [B8ZS]
[0–133], 133–266, 266–399, 399–533,
533–655
Send all Ones on DSX-1 Failure
[Enable], Disable
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Slot Assignment
Select Time Slot Assignment to make cross-connection assignments.
Select Frame Relay Network Assignments to assign DS0s on the T1 network
interface(s) for frame relay links.
Frame Relay-to-Network Interface Time Slot Assignment
Network Channel
Time Slot Discovery
N01–N24
Settings
Default in [Bold]
[Enable], Disable
[Available], Assigned, FrameRly1
Select DSX-1-to-Network Assignments to assign or unassign DSX-1 timeslots to T1
network interface timeslots.
DSX-1-to-Network Interface Time Slot Assignment
Network Channel
Settings
Default in [Bold]
N01–N24
[Available], Assigned, DSX-1/yy
Signaling and Trunk Conditioning None, [RBS], E&M-idle, E&M-busy, FXSg-idle,
FXSg-busy, , FXS1-idle, FXS1-busy, FXSD-idle,
FXSD-busy, PLAR3idle, PLAR3busy, PLAR4idle,
PLAR4busy, DPO-idle, DPO-busy, FXOg-idle,
FXOg-busy, FXO1-idle, FXO1-busy, FXOD-idle,
FXOD-busy, DPT-idle, DPT-busy, USER-0000,
USER-0001, USER-0010, USER-0011,
USER-0100, USER-0101, USER-0110,
USER-0111, USER-1000, USER-1001,
USER-1010, USER-1011, USER-1100,
USER-1101, USER-1110, USER-1111
Select Sync Data Port Assignments to assign or unassign a synchronous data port to
the Network or DSX-1 interface timeslots.
Sync Data Port-to-Network or DSX-1 Interface Time Slot Assignment
Network or DSX-1 Channel
Assign To
Settings
Default in [Bold]
[Net1], DSX1-1
N01–N24
(Net1) [Available], Assigned, SsPn
D01–N24
(DSX1-1)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame Relay
Select Frame Relay to configure the Frame Relay characteristics of the following
interfaces:
H
H
Network
Data Ports
Frame Relay
Configuration Option
LMI Protocol
Settings
Default in [Bold]
lnitialize_From_Net1FR1,
Initialize_From_Interface,
Auto_On_LMI_Fail,
Standard,
Annex-A,
Annex-D
[lnitialize_From_Interface] for a data port link.
[Auto_On_LMI_Fail] for a network link.
LMI Parameters
[System], Custom
When LMI Parameters is set to System:
Frame Relay DS0s Base Rate
[Nx64], Nx56
When LMI Parameters is set to Custom:
Frame Relay DS0s Base Rate
LMI Error Event (N2)
[Nx64], Nx56
1, 2, [3], 4, 5, 6, 7, 8, 9, 10
[1], 2, 3, 4, 5, 6, 7, 8, 9, 10
1, 2, 3, 4, 5, [6], . . . 255
5, [10], 15, 20, 25, 30
LMI Clearing Event (N3)
LMI Status Enquiry (N1)
LMI Heartbeat (T1)
LMI Inbound Heartbeat (T2)
5, 10, [15], 20, 25, 30
LMI N4 Measurement Period (T3) 5, 10, 15, [20], 25, 30
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DLCI Records
Select DLCI Records to manually configure DLCI records for each interface. The
Auto-Configuration feature provides automatic configuration of DLCI records.
Select DLCI Records to configure the DLCI Records for the following interfaces:
H
H
H
Network
Data Port
ISDN
The Auto-Configuration feature provides automatic DLCI record configuration.
DLCI Records for Each Interface
Configuration Option
DLCI Number
Settings
Default in [Bold]
16–1007
DLCI Type
Standard, Multiplexed
[Standard] for DLCIs on user data ports.
[Multiplexed] for network and ISDN interfaces.
CIR (bps)
Tc
0–1536000 [64000]
This field displays the committed rate
measurement interval to be used for the DLCI
based upon the displayed option settings.
Committed Burst Size Bc (Bits)
[CIR], Other
Bc
0–1536000 [64000]
Excess Burst Size Be (Bits)
Be
0–1536000 [1472000]
Low, Medium, [High]
Low, [Medium], High
DLCI Priority
Outbound Management Priority
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PVC Connections
Select PVC Connections to manually configure the logical connections between the
selected interface and the data ports. The Auto-Configuration feature provides
automatic configuration of PVC connections.
PVC Connections
Configuration Option
Source Link
Settings
Default in [Bold]
Port-n, ISDN Link Name, Net1-FR1
Source DLCI
16 –1007
Source EDLCI
0 – 62
Primary Destination Link
Primary Destination DLCI
Primary Destination EDLCI
Alternate Destination Link
Alternate Destination DLCI
Alternate Destination EDLCI
ISDN Link Name, Net1-FR1
16 –1007
0 – 62
ISDN Link Name, Net1-FR1
16 –1007
0–62
Management and Communication
Select Management and Communication to configure the FrameSaver unit so it can be
managed by an NMS or Telnet terminal, and to select the appropriate protocols.
H
H
H
H
H
H
H
H
Node IP
Management PVCs
General SNMP Management
Telnet and FTP Sessions
SNMP NMS Security
SNMP Traps
Communication Port
Modem Port
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Node IP
Select Node IP to configure support of the IP communication network.
Node IP
Configuration Option
Node IP Address
Settings
Default in [Bold]
001.000.000.000 – 223.255.255.255, [Clear]
[000.000.000.000] – 255.255.255.255, Clear
[None], Modem, COM, PVCname
[None], PVCname
Node Subnet Mask
Default IP Destination
TS Access Management Link
TS Management Link
Access Level
[Level-1], Level-2, Level-3
Management PVCs
Select Management PVCs to configure a Management PVC for in-band management.
The Auto-Configuration feature provides automatic configuration of Management PVCs
on the Network interface.
Management PVCs
Configuration Option
Name
Settings
Default in [Bold]
ASCII text entry (8 characters)
Intf IP Address
[Node-IP-Address], Special (address entry:
001.000.000.000 – 223.255.255.255 )
Intf Subnet Mask
[Node-Subnet-Mask], Calculate,
Special (address entry:
000.000.000.000 – 255.255.255.255 )
Set DE
Enable, [Disable]
Primary Link
Primary DLCI
Primary EDLCI
Primary Link RIP
Net1-FR1, Port-n, ISDN Link Name, Clear
16–1007
0–62
None, Standard_out, Proprietary
[Proprietary] for management links on
multiplexed DLCIs.
[Standard_out] for management links on
standard DLCIs.
Alternate Link
Alternate DLCI
Alternate EDLCI
Net1-FR1, Port-n, ISDN Link Name, Clear
16–1007
0–62
14
Download from Www.Somanuals.com. All Manuals Search And Download.
General SNMP Management
Select General SNMP Management to configure the FrameSaver unit so it can be
managed as an SNMP agent.
General SNMP Management
Configuration Option
SNMP Management
Community Name 1
Name 1 Access
Settings
Default in [Bold]
[Enable], Disable
ASCII text entry, [Public], Clear
Read, [Read/Write]
ASCII text entry, [Clear]
[Read], Read/Write
Community Name 2
Name 2 Access
Telnet and FTP Sessions
Select Telnet and FTP Sessions to configure access to the FrameSaver unit through
Telnet or FTP, and to determine whether security will be required.
Telnet and FTP Sessions
Configuration Option
Telnet Session
Settings
Default in [Bold]
[Enable], Disable
Enable, [Disable]
[Level-1], Level-2, Level-3
[Enable], Disable
1–60 [10]
Telnet Login Required
Session Access Level
Inactivity Timeout
Disconnect Time (Minutes)
FTP Session
[Enable], Disable
Enable, [Disable]
1–[1536]
FTP Login Required
FTP Max Receive Rate (Kbps)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SNMP NMS Security
Select SNMP NMS Security to configure access to the unit.
SNMP NMS Security
Configuration Option
NMS IP Validation
Number of Managers
NMS n IP Address
Access Type
Settings
Default in [Bold]
Enable, [Disable]
[1]–10
001.000.000.000–223.255.255.255, [Clear]
[Read], Read/Write
SNMP Traps
Select SNMP Traps to configure desired SNMP traps and dialing out when SNMP traps
occur.
SNMP Traps
Configuration Option
SNMP Traps
Settings
Default in [Bold]
Enable, [Disable]
[1]– 6
Number of Trap Managers
NMS n IP Address
Initial Route Destination
General Traps
001.000.000.000–223.255.255.255, [Clear]
[AutoRoute], Modem, COM, PVCname
Disable, Warm, AuthFail, [Both]
Enable, [Disable]
Enterprise Specific Traps
Link Traps
Disable, Up, Down, [Both]
Network, DSX-1, T1s, Ports, DBM, [All]
Network, Ports, [All]
Link Traps Interfaces
DLCI Traps on Interfaces
RMON Traps
[Enable], Disable
Trap Dial-Out
Enable, [Disable]
Trap Disconnect
[Enable], Disable
Call Retry
Enable, [Disable]
Dial-Out Delay Time (Min)
Alternate Dial-Out Directory
1–10 [5]
[None], 1–5
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication Port
Select Communication Port to configure the FrameSaver unit’s COM port.
Communication Port
Configuration Option
Port Use
Settings
Default in [Bold]
[Terminal], Net Link
When Port Use is set to Terminal:
Data Rate (Kbps)
Character Length
Parity
9.6, 14.4, [19.2], 28.8, 38.4, 57.6, 115.2
7, [8]
[None], Even, Odd
[1], 2
Stop Bits
Ignore Control Leads
Login Required
Port Access Level
Inactivity Timeout
Disconnect Time (Minutes)
When Port Use is set to Net Link:
Data Rate (Kbps)
Character Length
Parity
[Disable], DTR
Enable, [Disable]
[Level-1], Level-2, Level-3
[Enable], Disable
1–60 [10]
9.6, 14.4, [19.2], 28.8, 38.4, 57.6, 115.2
7, [8]
[None], Even, Odd
Stop Bits
[1], 2
Ignore Control Leads
IP Address
[Disable], DTR
001.000.000.000–223.255.255.255, [Clear]
[000.000.000.000]–255.255.255.255, Clear
[PPP], SLIP
Subnet Mask
Link Protocol
RIP
[None], Standard_out
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Modem Port
Select Modem Port to configure the FrameSaver unit’s Modem port.
Modem Port
Configuration Option
Port Use
Settings
Default in [Bold]
[Terminal], Net Link
When Port Use is set to Terminal:
Dial-In Access
[Enable], Disable
Enable, [Disable]
[Level-1], Level-2, Level-3
[Enable], Disable
1–60 [10]
Login Required
Port Access Level
Inactivity Timeout
Disconnect Time (Minutes)
When Port Use is set to Net Link:
Dial-In Access
[Enable], Disable
IP Address
001.000.000.000–223.255.255.255, [Clear]
[000.000.000.000]–255.255.255.255, Clear
[PPP], SLIP
Subnet Mask
Link Protocol
Alternate IP Address
Alternate Subnet Mask
RIP
001.000.000.000 –223.255.255.255, [Clear]
[000.000.000.000]–255.255.255.255, Clear
[None], Proprietary, Standard_out
Auto Backup Criteria
Select Auto Backup Criteria to control when automatic backup will take place.
Auto Backup Criteria
Configuration Option
Auto Backup
Settings
Default in [Bold]
Enable, [Disable]
When Auto Backup Allowed
Backup Allowed From
Backup Allowed To
[Always], Restrict
Monday–Sunday, [00:00] –23:00
Monday–Sunday, 00:00 –[24:00]
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty, Sales, Service, and Training Information
Contact your local sales representative, service representative, or distributor directly for
any help needed. For additional information concerning warranty, sales, service, repair,
installation, documentation, training, distributor locations, or Paradyne worldwide office
locations, use one of the following methods:
H
H
Telephone: Call our automated system to receive current information via fax or to
speak with a company representative.
— Within the U.S.A., call 1-800-870-2221
— Outside the U.S.A., call 1-727-530-2340
Document Feedback
We welcome your comments and suggestions about this document. Please mail them
to Technical Publications, Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773,
document in your correspondence. Please include your name and phone number if you
are willing to provide additional clarification.
Trademarks
FrameSaver is a registered trademark of Paradyne Corporation. All other products and
services mentioned herein are the trademarks, service marks, registered trademarks,
or registered service marks of their respective owners.
Patent Notification
FrameSaver SLV products are protected by U.S. Patents: 5,550,700 and 5,654,966.
Other U.S. patents pending.
Copyright E 2000 Paradyne Corporation. Printed in U.S.A.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|