781 SWIVEL CABLE KIT
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
USER’S GUIDE
CLASS H
1
Version: 781101
PART # 7123201
REV.A
Revision: 05/23/01
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 2
3/8 X 3-3/4”
BOLT
3/8” LOCK NUT
3/8 X 3-3/4”
BOLT
3/8” LOCK NUT
STEP 2:
• Remove one 3/8” LOCK NUT and one 3/8 X 3-3/4” BOLT from the TOP and BOTTOM PLATES as shown in FIGURE 2.
Discard the 3/8 X 3-3/4” BOLTS.
1/2
1/2
1/2
1/2
1/2
1/2
0
1
2
3
4
5
6
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 3
3
3/8 X 4-1/4” 4
2
3/8” LOCK
NUT
SHORT
CABLE
STEP 3:
• Assemble the CABLES (2) to the TOP PLATES using one 3/8 X 4-1/4” BOLT (4), two 3/8” SAE WASHERS (3) and one previ-
ously removed 3/8” LOCK NUT as shown in STEP 3.
• Disassemble the SHORT CABLE and the turnbuckle on LONG CABLE (2) as shown in FIGURE 3. The SHORT CABLE will be
reassembled later.
1/2
1/2
1/2
1/2
1/2
1/2
0
1
2
3
4
4
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
SHORT CABLE
FIGURE 4
STEP 4:
• CAREFULLY slide the GUIDE BRACKET (1) through the CABLES (2) as shown in FIGURE 4.
• Assemble the SHORT CABLE and the turnbuckle to each CABLE (2) as shown in FIGURE 4.
1/2
1/2
1/2
1/2
1/2
1/2
0
1
2
3
5
4
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WEIGHT
STACK
CABLE
2
3/8” LOCK NUT
3/8 X 1-3/4”
BOLT
PULLEY
ARM
CABLE
FIGURE 5
STEP 5:
• Slide the GUIDE BRACKET (1) up and reattach the WEIGHT STACK CABLE as shown in FIGURE 5.
• Loop the ARM CABLE around the previously removed pulley and assemble it to the GUIDE BRACKET (1) with the previously
removed hardware as shown in FIGURE 5.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 6
2
3/8 X 4-1/4” 4
3
3/8” LOCK
NUT
STEP 6:
• Assemble the CABLES (2) to the BOTTOM PLATES using one 3/8 X 4-1/4” BOLT (4), two 3/8” SAE WASHERS (3) and one
previously removed 3/8” LOCK NUT as shown in STEP 6.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2
TURN-
BUCKLE
JAM NUT
FIGURE 7
STEP 7:
• Adjust the turnbuckle on each CABLE (2) to add tension to the CABLES (2). Secure turnbuckle with the JAM NUTS as shown in
FIGURE 7.
• Refer to the 777 USER GUIDE to adjust tension in the systems cables and tighten all jam nuts securely.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|