Fire alarm system
Rope elevator kit 6362
•
A kit with all the necessary pieces for a rope elevator.
General
6362 is a kit to make a rope elevator for a
detector and its base, e.g. detector 3304 and
analog base 3312.
Product applications
The rope elevator is used with any of the
Panasonic heat or smoke detectors plugged
in a base, allowing the user to access a
detector mounted on a high ceiling height, in
order to perform a test, maintenance, replace
the detector, etc.
The kit
The kit consists of the following:
•
•
Protective cover for detector (6360)
Cleat (to fix the rope & hang it up;
not shown in the figure above)
20 m rope (Ø2 mm polyester)
Metal plate
Two screws (to fix the base)
Two loop screws (for the rope)
Two wood screws (to fix the cleat)
Connection box (five screw term.)
Cable clamp (for the conn. box)
Rope clamp (to fix the rope)
Cable clamp (to fix the cable)
•
•
•
•
•
•
•
•
•
Panasonic Electric Works Fire & Security Technology Europe AB
Citadellsvägen 23, SE-211 18 Malmö, Sweden
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99
Download from Www.Somanuals.com. All Manuals Search And Download.
|