Panasonic Personal Computer CF 31 User Manual

OPERATING INSTRUCTIONS

Personal Computer

_{Model No.}CF-31 _series

Contents

Getting Started

Introduction.................................................................

Read Me First ............................................................

(Precautions)

Description of Parts..................................................

First-time Operation..................................................

Useful Information

On-screen Manual....................................................

Handling and Maintenance.......................................

Reinstalling Software................................................

Troubleshooting

Troubleshooting (Basic)............................................

Appendix

LIMITED USE LICENSE AGREEMENT...................

Speciﬁcations ...........................................................

For further information about the com-

puter, you can refer to the on-screen

manual.

LIMITED WARRANTY..............................................

To access the on-screen manual

page 17 “On-screen Manual”

ꢀ

Please read these instructions carefully before using this product, and save this manual for future use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Read Me First

Models for U.S.A.

Federal Communications Commission Radio Frequency

Interference Statement

all person’s body (excluding extremities of hands, wrist and

feet) during wireless modes of operation.

25-M-5

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one

or more of the following measures:

This product is restricted to indoor use due to its operation in

the 5.15 to 5.25 GHz frequency range.

FCC requires this product to be used indoors for the frequency

range 5.15 to 5.25 GHz to reduce the potential for harmful

interference to co-channel Mobile Satellite systems. High power

radars are allocated as primary users of the 5.25 to 5.35 GHz

and 5.65 to 5.85 GHz bands. These radar stations can cause

interference with and/or damage this product.

25-M-W-5

Responsible Party: Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Reorient or relocate the receiving antenna.

ꢂ

Tel No:1-800-LAPTOP5 (1-800-527-8675)

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the Panasonic Service Center or an experienced

radio/TV technician for help.

6-M-1

ꢂ

Warning

To assure continued compliance, use only shielded interface

cables when connecting to a computer or peripheral. Also, any

changes or modiﬁcations not expressly approved by the party

responsible for compliance could void the user’s authority to

operate this equipment.

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

1. This equipment complies with CFR47 Part 68 rules.

On the computer is a label that contains, among other infor-

mation, the FCC registration number and ringer equivalence

number (REN) for this equipment. If required, this informa-

tion must be provided to the telephone company.

2. An FCC compliant telephone cord and modular plug is

provided with this equipment. This equipment is designed to

be connected to the telephone network or premises wiring

using a compatible modular jack which is Part 68 compliant.

See Installation Instructions for details.

3. The REN is used to determine the quantity of devices which

may be connected to the telephone line. Excessive RENs on

the telephone line may result in the devices not ringing in re-

sponse to an incoming call. In most, but not all area, the sum of

RENs should not exceed ﬁve (5.0). To be certain of the number

of devices that may be connected to a line, as determined by

the total RENs, contact the local telephone company.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

FCC RF Exposure Warning:

This equipment is provided with PC Card slot that could be

used with wireless transmitters, which will be speciﬁcally

recommended when they become available.

ꢂ

Other third-party wireless transmitters have not been RF

exposure evaluated for use with this computer and may not

comply with FCC RF exposure requirements.

4. If your telephone equipment cause harm to the telephone network,

the telephone company will notify you in advice that temporary

discontinuance of service may be required. But if advice notice

isn’t practical, the telephone company will notify the customer as

soon as possible. Also, you will be advised of your right to ﬁle a

complaint with the FCC if you believe it is necessary.

5. The telephone company may take changes in its facilities, equip-

ment, operations or procedures that could affect the operation

of the equipment. If this happens the telephone company will

provide advance notice in order for you to make necessary modi-

ﬁcations to maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair or

warranty information, please contact Panasonic Corpora-

tion of North America at DIAL TOLL FREE 1-800-LAPTOP5

(1-800-527-8675). If the equipment is causing harm to the

telephone network, the telephone company may request that

you disconnect the equipment until the problem is resolved.

7. There are no user serviceable parts contained in this equipment.

8. This equipment may not be used on coin service provided by the tele-

phone company. Connection to party lines is subject to state tariffs.

9. The Telephone Consumer Protection Act of 1991 makes it unlawful

for any person to use a computer or other electronic device to send

any message via a telephone fax machine unless such message

clearly contains in a margin at the top or bottom of each transmit-

ted page or on the ﬁrst page of the transmission, the date and time

it is sent and an identiﬁcation of the business or other entry, or

other individual sending the message and the telephone number of

the sending machine or such business, other entity, or individual. In

order to program this information into your fax software, you should

refer to the manual of the Fax software being used.

This equipment complies with FCC radiation exposure limits

set forth for an uncontrolled environment.

This equipment has been approved for portable operation,

and does not require any minimum spacing be provided

between antennas and all person’s body.

This equipment may not be co-located or operated with any

other antenna or transmitter.

ꢂ

25-M-3

This PC with WWAN transmitter installed, has been ap-

proved for mobile operation and to assure compliance with

RF exposure requirements, a minimum of 20 cm (8 inches)

must be maintained between the WWAN antenna located in

top of LCD and all person’s body (excluding extremities of

hands, wrist and feet) during wireless modes of operation.

ꢂ

This equipment is provided with external antenna

connector(s) for connection to optional Car Mounter or Port

Replicator for mobile external mounted antenna(s).

External antenna(s) must be professionally installed and

cannot exceed recommended maximum antenna gain as

described in individual provided supplement instructions for

wireless transmitters.

For WLAN, the Car Mounter should be used with Radi-

all/Larsen WLAN whip antenna, type NMO5E2400BKTNC

with 5dBi antenna gain or less. Also, user must maintain

minimum 20 cm spacing between external antenna(s) and

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Read Me First

10. According to the FCC’s electrical safety advisory, we recom-

mend that you may install an AC surge arrestor in the AC outlet

to which this equipment is connected. Telephone companies

report that electrical surges, typically lightning transients, are

very destructive to customer terminal equipment connected to

AC power sources and that this is a major nationwide problem.

“Caution : To reduce the risk of ﬁre, use only No.26 AWG or

larger (e.g., 24 AWG) UL listed or CSA certiﬁed telecommunica-

tion line cord.”

This product contains a Coin Cell Lithium Battery

which contains Perchlorate Material - special handling

may apply.

See www.dtsc.ca.gov/harzardouswaste/perchlorate/

38-M-1

“ATTENTION : Pour réduire le risque d’incendie, utiliser unique-

ment des conducteurs de télécommunications 26 AWG ou de

section supérieure (p.ex. 24 AWG) UL énumérés ou CSA certiﬁé.”

16-M-1

Models for Canada

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved modem unit.

The Industry Canada label is afﬁxed on the modem unit.

Pour sa propre protection, l’utilisateur doit s’assurer que tous

les ﬁls de mise à la terre de la source d’énergie électrique, des

lignes téléphoniques et des canalisations d’eau métalliques, s’il

y en a, sont raccordés ensemble. Cette précaution est particu-

lièrement importante dans les régions rurales. Avertissement:

L’utilisateur ne doit pas tenter de faire ces raccordements lui-

même; il doit avoir recours à un service d’inspection des instal-

lations électriques, ou à un électricien, selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné

à chaque dispositif terminal indique le nombre maximal de

terminaux qui peuvent être raccordés à une interface. La ter-

minaison d’une interface téléphonique peut consister en une

combinaison de quelques dispositifs, à la seule condition que

la somme d’indices d’équivalence de la sonnerie de touts les

dispositifs n’excède pas 5.”

EQUIPMENT ATTACHEMENT LIMITATIONS

“NOTICE: The Industry Canada label identiﬁes certiﬁed equip-

ment. This certiﬁcation means that the equipment meets tele-

communications network protective, operational and safety re-

quirements as prescribed in the appropriate Terminal Equipment

Technical Requirements document(s). The Department does not

guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local telecom-

munications company. The equipment must also be installed us-

ing an acceptable method of connection. The customer should

be aware that compliance with the above conditions may not

prevent degradation of service in some situations.

Repairs to certiﬁed equipment should be coordinated by a rep-

resentative designated by the supplier. Any repairs or alterations

made by the user to this equipment, or equipment malfunctions,

may give the telecommunications company cause to request

the user to disconnect the equipment.

Users should ensure for their own protection that the electri-

cal ground connections of the power utility, telephone lines and

internal metallic water pipe system, if present, are connected

together. This precaution may be particularly important in rural

areas. Caution: Users should not attempt to make such con-

nections themselves, but should contact the appropriate electric

inspection authority, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN) assigned to

each terminal device provides an indication of the maximum num-

ber of terminals allowed to be connected to a telephone interface.

The termination on an interface may consist of any combination of

devices subject only to the requirement that the sum of the Ringer

Equivalence Numbers of all the devices does not exceed 5.”

REN: See bottom of the computer

IES: Voir sous le fond de l’ordinateur

17-Ca-1

Canadian ICES-003

This Class B digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

7-M-2

Industry Canada

This product complies with RSS310 Industry Canada.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including interfer-

ence that may cause undesired operation of the device.

30-Ca-1-1

This product (local network devices) for the band 5150-5250

MHz is only indoor usage to reduce potential for harmful inter-

ference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users (meaning

they have priority) of 5250-5350 MHz and 5650-5850 MHz and

these radars could cause interference and/or damage to LE-

LAN devices.

RESTRICTIONS CONCERNANT LE RACCORDEMENT DE

MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identiﬁe le matériel homo-

logué. Cette étiquette certiﬁe que le matériel est conforme aux

normes de protection, d’exploitation et de sécurité des réseaux

de télécommunications, comme le prescrivent les documents

concernant les exigences techniques relatives au matériel termi-

nal. Le Ministère n’assure toutefois pas que le matériel fonction-

nera à la satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est

permis de le raccorder aux installations de l’entreprise locale de

télécommunication. Le matériel doit également être installé en

suivant une méthode acceptée de raccordement.

30-Ca-2-1

This device has been designed to operate with the Radiall/

Larsen whip antenna, type NMO5E2400BKTNC WLAN an-

tenna having a maximum gain of 5dB. A WLAN Antenna having

a higher gain is strictly prohibited per regulations of Industry

Canada. The Required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the an-

tenna type and its gain should be so chosen that the equivalent

isotropically radiated power (EIRP) is not more than that re-

quired for successful communication.

L’abonné ne doit pas oublier qu’il est possible que la conformité

aux conditions énoncées ci-dessus n’empêche pas la dégrada-

tion du service dans certaines situations.

25-Ca-1-1

Les réparations de matériel homologué doivent être coordon-

nées par un représentant désigné par le fournisseur.

L’entreprise de télécommunications peut demander à l’utilisateur de

débrancher un appareil à la suite de réparations ou de modiﬁcations

effectuées par l’utilisateur ou à cause de mauvais fonctionnement.

Download from Www.Somanuals.com. All Manuals Search And Download.

Models for Europe

Declaration of Conformity (DoC)

“Hereby, Panasonic declares that this Personal Computer is in compliance with the essential requirements and

other relevant provisions of the Directive 1999/5/EC.”

Hint:

If you want to get a copy of the original DoC of our above mentioned products,

please contact our web address: http://www.doc.panasonic.de

Authorized Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Network connection of Wired Modem.

The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area and Turkey;

- Public Switched Telephony Networks

Technical Features of Wired Modem.

The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s

18-E-1

Important Safety Instructions / Importantes Mesures De Sécurité

When using your telephone equipment, basic safety precautions

should always be followed to reduce the risk of ﬁre, electric

shock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bath

tub, wash bowl, kitchen sink or laundry tub, in a wet base-

ment or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during

an electrical storm. There may be a remote risk of electric

shock from lightning.

Certaines mesures de sécurité doivent être prises pendant l’utilisation

de matérial téléphonique aﬁn de réduire les risques d’incendie, de

choc électrique et de blessures. En voici quelquesunes:

1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une

baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à

laver, dans un sous-sol humide ou près d’une piscine.

2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil

sans ﬁl) pendant un orage électrique. Ceci peut présenter

un risque de choc électrique causé par la foudre.

3. Ne pas utiliser l’appareil téléphonique pour signaler une fuite

de gaz s’il est situé près de la fuite.

3. Do not use the telephone to report a gas leak in the vicinity

of the leak.

4. Use only the power cord and batteries indicated in this man-

ual. Do not dispose of batteries in a ﬁre. They may explode.

Check with local codes for possible special disposal instruc-

tions.

4. Utiliser seulement le cordon d’alimentation et le type de piles

indiqués dans ce manual. Ne pas jeter les piles dans le feu:

elles peuvent exploser. Se conformer aux règlements perti-

nents quant à l’élimination des piles.

SAVE THESE INSTRUCTIONS

CONSERVER CES INSTRUCTIONS

19-E-1

19-F-1

Information to the User

This product and your Health

Using this product on board of airplanes, or

In any other environment where the risk of interference to

other devices or services is perceived or identiﬁed as harmful.

ꢂ

This product, like other radio devices, emits radio frequency

electromagnetic energy. The level of energy emitted by this

product however is far much less than the electromagnetic ener-

gy emitted by wireless devices like for example mobile phones.

Because this product operates within the guidelines found in

radio frequency safety standards and recommendations, we

believe this product is safe for use by consumers. These stan-

dards and recommendations reﬂect the consensus of the sci-

entiﬁc community and result from deliberations of panels and

committees of scientists who continually review and interpret

the extensive research literature.

If you are uncertain of the policy that applies on the use of

wireless devices in a speciﬁc organization or environment (e.g.

airports), you are encouraged to ask for authorization to use this

product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interference

caused by unauthorized modiﬁcation of this product. The cor-

rection of interference caused by such unauthorized modiﬁca-

tion will be the responsibility of the user. We and its authorized

resellers or distributors are not liable for damage or violation of

government regulations that may arise from failing to comply

with these guidelines.

In some situations or environments, the use of this product may be

restricted by the proprietor of the building or responsible representa-

tives of the organization. These situations may for example include:

26-M-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Read Me First

Informations destinées aux utilisateurs

<Uniquement les modèles avec réseau local sans ﬁl et/ou Blue-

tooth>

Ce produit et votre santé

A bord d’un avion, ou

ꢂ

Dans tout autre environnement où les risques d’interférence

sur d’autres appareils ou services sont perçus ou identiﬁ-

ables comme dangereux.

Ce produit, comme tout autre appareil radio, émet de l’énergie

radioélectrique. Toutefois, la quantité d’énergie émise par ce

produit est beaucoup moins importante que l’énergie radioélec-

trique émise par des appareils sans ﬁl tels que les téléphones

portables. L’utilisation de ce produit ne comporte aucun risque

pour le consommateur du fait que cet appareil opère dans les

limites des directives concernant les normes et les recom-

mendations de sécurité sur les fréquences radio. Ces normes

et recommandations reﬂètent le consensus de la communauté

scientiﬁque et résultent de délibérations de jurys et comités de

scientiﬁques qui examinent et interprètent continuellement les

nouveautés de la vaste littérature sur les recherches effectuées.

Dans certaines situations ou environnements, l’utilisation de ce

produit peut être restreinte par le propriétaire du bâtiment ou

par les représentants responsables de l’organisation. Ces situa-

tions peuvent être les suivantes par exemple :

Si vous n’êtes pas sûr de la réglementation applicable à l’

utilisation d’appareils sans ﬁl dans une organization ou un

environnement spéciﬁque, (par exemple dans un aéroport)

nous vous invitons à demander l’autorisation d’utiliser ce produit

avant sa mise en marche.

Informations concernant la réglementation

Nous déclinons toute responsabilité pour toute interférence

radio ou télévision causée par des modiﬁcations non autorisées

apportées à ce produit. La correction d’interférences causées

par de telles modiﬁcations non autorisées sera la seule respon-

sabilité de son utilisateur. Nousmêmes, les revendeurs ofﬁciels

et les distributeurs ne sommes pas responsable de tout dégât

ou de toute violation des règlements de l’État pouvant découler

du non-respect de ces directives.

26-F-1

Safety Precautions

The following safety precautions must be observed during all phases of the operation, usage, service or repair of any Personal

Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular terminal are advised to con-

vey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied

with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the

product. Panasonic assumes no liability for customer failure to comply with these precautions.

When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer

or Handheld Computer incorporating wireless WAN modem off, if instructed to do so by the guidelines posted in sensitive

areas. Medical equipment may be sensitive to RF energy.

The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interfer-

ence from Personal Computer or Handheld Computer incorporating wireless WAN modem placed close to the device.

If in doubt about potential danger, contact the physician or the manufacturer of the device to verify that the equipment is

properly shielded. Pacemaker patients are advised to keep their Personal Computer or Handheld Computer incorporating

wireless WAN modem away from the pacemaker, while it is on.

Switch off Personal Computer or Handheld Computer incorporating wireless WAN modem before boarding an aircraft.

Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to

prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or

denial of cellular services to the offender, legal action, or both.

Do not operate Personal Computer or Handheld Computer incorporating wireless WAN modem in the presence of ﬂam-

mable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or

where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmospheres

can constitute a safety hazard.

Your Personal Computer or Handheld Computer incorporating wireless WAN modem receives and transmits radio fre-

quency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers

or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Hand-

held Computer incorporating wireless WAN modem wherever forbidden, or when you suspect that it may cause interfer-

ence or danger.

Road safety comes ﬁrst! Do not use a Personal Computer or Handheld Computer incorporating wireless WAN modem

while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal

injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage area while driving.

Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may

deploy.

Air bags inﬂate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area

may be propelled with great force and cause serious injury to occupants of the vehicle.

IMPORTANT!

Personal Computer or Handheld Computer incorporating wireless WAN modem operate using radio signals and cellular

networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely upon any wireless

device for essential communications, for example emergency calls.

Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating wireless WAN

modem must be switched on and in a service area with adequate cellular signal strength.

Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock func-

tions, ﬁxed dialing etc.). You may need to deactivate those features before you can make an emergency call.

Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Computer incorpo-

rating wireless WAN modem.

27-1-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Lithium Battery / Pile au lithium

Lithium Battery!

Pile au lithium!

This computer contains a lithium battery to enable the date,

time, and other data to be stored. The battery should only be

exchanged by authorized service personnel.

Warning!

A risk of explosion from incorrect installation or misapplication

may possibly occur.

Le micro-ordinateur renferme une pile au lithium qui permet de

sauvegarder certaines données, notamment la date et l’heure.

La pile ne doit être remplacée que par un technicien qualiﬁé.

Danger ! Risque d’explosion en cas de non respect de cette

mise en garde!

15-F-1

15-E-1

For Used in Motor Vehicle /Pour L’utilisation Dans Un Véhicule Motorisé

Warning: Notebook Computer may be installed in a motor

vehicle and visible to the driver only if used to support vehicle

related functions such as vehicle information, system control,

rear or side observation and navigation. If used for entertain-

ment purpose, such as television reception or video play, it must

be installed to the rear of the driver’s seat where it will not be

visible, directly or indirectly, to the operator of the motor vehicle.

Check with individual state/provincial laws to determine lawful

use of this product while operating within a motor vehicle.

35-M-1

Avertissement : L’ordinateur bloc-notes peut être installé dans

un véhicule motorisé et dans le champ de vision du conducteur

uniquement en tant que dispositif d’aide aux fonctions du véhi-

cule, comme par exemple pour fournir des informations sur le

véhicule, comme dispositif de contrôle de système, pour l’obser-

vation à l’arrière ou sur les côtés du véhicule, ainsi que pour

fournir de l’information routière. Pour toute utilisation à ﬁn de

divertissement, comme par exemple pour regarder la télévision

ou jouer à des jeux vidéo, il doit être installé à l’arrière du siège

du conducteur, en un emplacement où il ne sera pas visible, ni

directement ni indirectement, pour le conducteur du véhicule

motorisé. Vériﬁez les lois fédérales et nationales qui régissent l’

utilisation légale de cet appareil à l’intérieur d’un véhicule mo-

torisé.

35-F-1

CD/DVD Drive Caution

CAUTION!

AVERTISSEMENT!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HERE-

IN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

12-E-1

CET APPAREIL UTILISE UN LASER.

L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU

L’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES

SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION

À DES RADIATIONS DANGEREUSES.

NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE

RÉPARER SOIMÊME.

Laser safety information is appropriate only when drive with

laser is installed.

CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL

QUALIFIÉ.

12-M-2-1

12-F-1

Les mesures de sécurité relatives au laser ne s’appliquent que

lors de l’installation d’une unité avec laser.

12-F-2-1

Information on Disposal in other Countries outside the European Union

These symbols are only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the

correct method of disposal.

53-M-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Read Me First

Precautions

DC/AC converter (inverter) may damage the AC adaptor. On an

airplane, only connect the AC adaptor/charger to an AC outlet

speciﬁcally approved for such use.

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS

PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC

CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT COCKPIT

EQUIPMENT/SYSTEMS^*1, MEDICAL DEVICES OR ACCES-

SORIES^*2, LIFE SUPPORT SYSTEMS OR OTHER EQUIP-

MENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH

ENSURING HUMAN LIFE OR SAFETY. PANASONIC WILL

NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING

FROM THE USE OF THIS PRODUCT ARISING OUT OF THE

FOREGOING USES.

Do Not Do Anything That May Damage the AC Cord, the AC

Plug, or the AC Adaptor

Do not damage or modify the cord, place it near hot tools, bend,

twist, or pull it forcefully, place heavy objects on it, or bundle it

tightly.

Continuing to use a damaged cord may result in ﬁre, short cir-

cuit, or electric shock.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2

Do Not Pull or Insert the AC Plug If Your Hands Are Wet

Electric shock may result.

Electrical Flight Bag (EFB) Systems and Class1 EFB Systems

when used during critical phases of ﬂight (e.g., during take-

off and landing) and/or mounted on to the aircraft. Class1 EFB

Systems and 2 EFB Systems are deﬁned by FAA: AC (Advi-

sory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance

Leaﬂets) No.36.

Clean Dust and Other Debris of the AC Plug Regularly

If dust or other debris accumulates on the plug, humidity, etc.

may cause a defect in the insulation, which may result in a ﬁre.

Pull the plug, and wipe it with a dry cloth.

Pull the plug if the computer is not being used for a long pe-

riod of time.

ꢃ

As deﬁned by the European Medical Device Directive (MDD)

93/42/EEC.

Panasonic cannot guarantee any speciﬁcations, technolo-

gies, reliability, safety (e.g. Flammability/Smoke/Toxicity/Radio

Frequency Emission, etc) requirements related to aviation

standards and medical equipment standards that differ from

the speciﬁcations of our COTS (Commercial-Off-The-Shelf)

products.

Insert the AC Plug Completely

If the plug is not inserted completely, ﬁre due to overheating or

electric shock may result.

Do not use a damaged plug or loose AC outlet.

ꢃ

Close the Connector Cover Tightly When Using This Prod-

uct Where Is a Lot of Water, Moisture, Steam, Dust, Oily

Vapors, etc.

Panasonic cannot guarantee any speciﬁcations, technolo-

gies, reliability, safety (e.g. Flammability/Smoke/Toxicity/Radio

Frequency Emission, etc) requirements related to aviation

standards that exceed the speciﬁcations of our COTS (Com-

mercial-Off-The-Shelf) products.

The entry of foreign matter may cause a ﬁre or electric shocks.

If foreign matter has found its way inside, immediately turn

the power off and unplug the AC cord, and then remove the

battery pack. Then contact your technical support ofﬁce.

ꢃ

ded for use in medical equipment in-

This computer is not inten

Do Not Disassemble This Product

The high-voltage areas inside may give you an electric shock,

or foreign matter may enter and result in a ﬁre.

cluding life-support systems, air trafﬁc control systems, or other

equipment, devices or systems that are involved with ensuring

human life or safety. Panasonic cannot be held responsible in

any way for any damages or loss resulting from the use of this

unit in these types of equipment, devices or systems, etc.

The CF-31 was developed based on thorough research into the

real-world portable computing environments. Exhaustive pursuit

of usability and reliability under harsh conditions led to innova-

tions such has the magnesium alloy exterior, vibration damped

hard disk drive and ﬂoppy disk drive, ﬂexible internal connec-

tions. The CF-31’s outstanding engineering has been tested

using the strict MIL-STD- 810F (for vibration and shock) and IP

(for dust and water) based procedures.

Keep SD Memory Cards Away from Infants and Small Chil-

dren

Accidental swallowing will result in bodily injury.

ꢃIn the event of accidental swallowing, see a doctor imme-

diately.

Do Not Place This Product on Unstable Surface

If balance is lost, this product may fall over or drop, resulting in

an injury.

Avoid Stacking

If balance is lost, this product may fall over or drop, resulting in

an injury.

As with any portable computer device precautions should be

taken to avoid any damage. The following usage and handling

procedures are recommended.

Do Not Leave This Product in High Temperature Environ-

ment for a Long Period of Time

Before putting the computer away, be sure to wipe off any

moisture.

Leaving this product where it will be exposed to extremely high

temperatures such as near ﬁre or in direct sunlight may deform

the cabinet and/or cause trouble in the internal parts. Continued

use in such a resulting condition may lead to short-circuiting or

insulation defects, etc. which may in turn lead to a ﬁre or electric

shocks.

If a Malfunction or Trouble Occurs, Immediately Stop Use

If a Malfunction Occurs, Immediately Unplug the AC Plug

and the Battery Pack

This product is damaged

Foreign object inside this product

Smoke emitted

Unusual smell emitted

Unusually hot

Continuing to use this product while any of the above conditions

ꢃ

Do Not Block the Ventilation Hole

Otherwise, heat will build up inside, possibly resulting in a ﬁre.

Hold the Plug When Unplugging the AC Plug

Pulling on the cord may damage the cord, resulting in a ﬁre or

electric shock.

are present may result in ﬁre or electric shock.

Do Not Move This Product While the AC Plug Is Connected

The AC cord may be damaged, resulting in ﬁre or electric shock.

If a malfunction or trouble occurs, immediately unplug the

AC plug and remove the unit from this product. Then, contact

your technical support ofﬁce for repair.

ꢃ

If the AC cord is damaged, unplug the AC plug immediately.

ꢃ

Use Only the Speciﬁed AC Adaptor With This Product

Using an AC adaptor other than the one supplied (supplied with the

unit or one sold separately as an accessory) may result in a ﬁre.

Do Not Touch This Product and Cable When It Starts Thun-

dering

Electric shock may result.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being

dropped may result in electric shock, short circuit, or ﬁre.

Do Not Connect the AC Adaptor to a Power Source Other

Than a Standard Household AC Outlet

Otherwise, a ﬁre due to overheating may result. Connecting to a

Download from Www.Somanuals.com. All Manuals Search And Download.

Take a Break of 10-15 Minutes Every Hour

Using this product for long periods of time may have detrimental

health effects on the eyes or hands.

Do Not Use With Exposing the Skin To This Product For a

Long Period of Time

Using this product with exposing the skin to the heat source of

this product or AC adaptor for a long period of time can cause a

low-temperature burn.

Do Not Turn the Volume Up To Loud When Using Head-

phones

Listening at high volumes that overstimulate the ear for long

periods of time may result in loss of hearing.

Use the Modem with a Regular Telephone Line

Connection to an internal phone line (on-premise switches) of

a company or business ofﬁce, etc. or to a digital public phone

or use in a country or area not supported by the computer may

result in a ﬁre or electric shocks.

Do Not Connect a Telephone Line, or a Network Cable

Other Than the One Speciﬁed, into the LAN Port

If the LAN port is connected to a network such as the ones

listed right, a ﬁre or electric shock may result.

Do not place the computer near a television or radio receiver.

Keep the computer away from magnets. Data stored on the

hard disk may be lost.

ꢂ

Networks other than 1000BASE-T, 100BASE-TX or

10BASE-T

ꢃ

Phone lines (IP phone (Internet Protocol Telephone), Tele-

phone lines, internal phone lines (on-premise switches),

digital public phones, etc.)

ꢃ

Precautions (Battery Pack)

Do Not Use With Any Other Product

The battery pack is not charged when the computer is ﬁrst

purchased. Be sure to charge it before using it for the ﬁrst

time. When the AC adaptor is connected to the computer,

charging begins automatically.

Should the battery leak and the ﬂuid get into your eyes, do

not rub your eyes. Immediately ﬂush your eyes with clear

water and see a doctor for medical treatment as soon as

possible.

ꢂ

The battery pack is rechargeable and was intended for the

speciﬁed product. If it is used with a product other than the one

for which it was designed, electrolyte leakage, generation of

heat, ignition or rupture may result.

Do Not Charge the Battery Using Methods Other Than

Those Speciﬁed

If the battery is not charged using one of the speciﬁed methods,

electrolyte leakage, generation of heat, ignition or rupture may

result.

CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type.

Dispose of Used Batteries According to the Instructions.

Do Not Throw the Battery Pack Into a Fire or Expose It to

Excessive Heat

58-E-1

Generation of heat, ignition or rupture may result.

NOTE

The battery pack may become warm during recharging or

normal use. This is completely normal.

Recharging will not commence if internal temperature of the

battery pack is outside of the allowable temperature range (0

°C to 50 °C {32°F to 122 °F}).

Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for

Example)

Electrolyte leakage, generation of heat, ignition or rupture may

result.

ꢂ

Do Not Insert Sharp Objects Into the Battery Pack, Expose

It to Bumps or Shocks, Disassemble, or Modify It

Electrolyte leakage, generation of heat, ignition or rupture may

result.

(

ꢀ

Reference Manual “Battery Power”) Once the allow-

able range requirement is satisﬁed, charging begins auto-

matically. Note that the recharging time varies based on the

usage conditions. (Recharging takes longer than usual when

the temperature is

If this product is subjected to a strong impact, stop using it im-

mediately.

ꢃ

Do Not Short the Positive (+) and Negative (-) Contacts

Generation of heat, ignition or rupture may result.

ꢃDo not place the battery pack together with articles such

as necklaces or hairpins when carrying or storing.

Do Not Use This Product with a Battery Pack Other Than

the One Speciﬁed

Use only the speciﬁed battery pack (CF-VZSU46AU) with your

product. Use of battery packs other than those manufactured

and supplied by Panasonic may present a safety hazard (gen-

eration of heat, ignition or rupture).

10 °C {50 °F} or below.)

If the temperature is low, the operating time is shortened.

Only use the computer within the allowable temperature

range.

This computer has a high temperature mode function that

prevents the degradation of the battery in high temperature

ꢂ

environments. (

Reference Manual “Battery Power”) A

ꢀ

level corresponding to a 100% charge for high temperature

mode is approximately equivalent to an 80% charge level for

normal temperature mode.

The battery pack is a consumable item. If the amount of

time the computer can be run by using a particular battery

pack becomes dramatically shorter and repeated recharging

does not restore its performance, the battery pack should be

replaced with a new one.

When transporting a spare battery inside a package, brief-

case, etc., it is recommended that it be placed in a plastic

bag so that its contacts are protected.

Always power off the computer when it is not in use. Leaving

the computer on when the AC adaptor is not connected will

exhaust the remaining battery capacity.

When the battery pack has become degraded, replace it

with a new one

Continued use of a damaged battery pack may result in heat

generation, ignition or battery rupture.

ꢂ

Do not touch the terminals on the battery pack. The battery

pack may no longer function properly if the contacts are dirty

or damaged.

ꢂ

Do not expose the battery pack to water, or allow it to be-

come wet.

If the battery pack will not be used for a long period of time (a

month or more), charge or discharge (use) the battery pack

until the remaining battery level becomes 30% to 40% and

store it in a cool, dry place.

ꢂ

This computer prevents overcharging of the battery by re-

charging only when the remaining power is less than approx.

95% of capacity.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of Parts

Left side

P Q R S T

EX PC

: Caps lock

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Hard disk drive status

A: Wireless LAN Antenna

: Power status of the multimedia pocket

: Battery status

Reference Manual “Wireless LAN”

ꢀ

Reference Manual “Battery Power”

ꢀ

B: Web Camera

: Power status

(Off: Power off/Hibernation, Green: Power on,

To use the Web Camera, the software corresponding to

the web camera is needed.

Blinking green: Sleep(

), Blinking green rapidly: Cannot

power on or resume due to low temperature.)

K: Power Switch

)/Standby

(

C: Wireless WAN Antenna

D: GPS Antenna (Rear side)

L: Carrying Handle

M: Stylus Holder

N: Fingerprint Reader

E: LCD

Reference Manual “Touchscreen” (Only for

ꢀ

model with touchscreen)

Reference Manual “Fingerprint Reader”

O: ExpressCard Slot

ꢀ

F: Function Key

Reference Manual “PC Card / ExpressCard”

ꢀ

Reference Manual “Key Combinations”

G: Bluetooth Antenna

ꢀ

P: PC Card Slot

Reference Manual “PC Card / ExpressCard”

ꢀ

Q: Multimedia Pocket

Reference Manual “Bluetooth”

ꢀ

Reference Manual “Multimedia Pocket”

ꢀ

H: Keyboard

I: Touch Pad

J: LED Indicator

R: Wireless Switch

Reference Manual “Disabling/Enabling Wireless

ꢀ

: SD Memory Card Indicator

(Blinking: During access)

Communication”

S: Smart Card Slot

Reference Manual “SD Memory Card”

ꢀ

: Wireless ready

Reference Manual “Smart Card”

T: SD Memory Card Slot

ꢀ

This indicator lights when Wireless LAN, Blue-

tooth, and/or Wireless WAN are connected and

ready. It does not necessarily indicate the On/Off

condition of the wireless connection.

Reference Manual “SD Memory Card”

ꢀ

U: Battery Pack

Speciﬁed Battery pack: CF-VZSU46AU

V: Ventilation Hole (Exhaust)

Reference Manual “Wireless LAN”, “Bluetooth”,

ꢀ

“Disabling/Enabling Wireless Communication”

A lithium ion battery that is recyclable powers the product you have purchased.

Please call 1-800-8-BATTERY for information on how to recycle this battery.

L’appareil que vous vous êtes procuré est alimenté par une batterie au lithium-ion.

Pour des renseignements sur le recyclage de la batterie, veuillez composer le

1-800-8-BATTERY.

48-M-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Right side

E^*1E^*2E^*3

1394

Rear side

Bottom

M N

A: Hard Disk Drive

Reference Manual “Hard Disk Drive”

B: HDMI Port

When they are connected, audio from the internal

speakers is not heard.

N: Microphone Jack

ꢀ

A condenser microphone can be used. If other types

of microphones are used, audio input may not be pos-

sible, or malfunctions may occur as a result. Before

recording, adjust to an appropriate volume.

Reference Manual “External Display”

ꢀ

C: SIM Card Slot

Insert the SIM card into the SIM card slot with the

contact side facing downward and with the cut corner

When recording in stereo using a stereo microphone:

ꢃ

oriented.

D: LAN Port

Click

(Start) - [Control Panel] - [Hardware and

Sound] - [Sound] - [Recording] - [Microphone] -

[Properties], and then remove a check mark of [En-

able Audio Enhancements] in [Advanced].

Reference Manual “LAN”

ꢀ

E: 2nd LAN Port^*1/ Modem Port^*2/ IEEE 1394 Interface Connector^*3

^*1<Only for model with 2nd LAN>

Click [Start] - [Control Panel] - [Sound, Speech, and

Reference Manual “LAN”

^*2<Only for model with Modem>

Reference Manual “Modem”

^*3<Only for model with IEEE 1394>

Reference Manual “IEEE 1394 Devices”

F: USB Port

ꢀ

Audio Device] - [SmartAudio] -

, and then select

neither [Voice Recording] nor [Voice Over IP].

When using a monaural microphone with a 2-terminal plug:

ꢀ

ꢃ

ꢀ

Click

(Start) - [Control Panel] - [Hardware and

Sound] - [Sound] - [Recording] - [Microphone] -

[Properties], and then add a check mark for [Enable

Audio Enhancements] in [Advanced].

Reference Manual “USB Devices”

ꢀ

G: DC-IN Jack

H: Security Lock

Otherwise, only audio on the left track will be recorded.

A Kensington cable can be connected.

For further information, read the manual that comes

with the cable.

Click [Start] - [Control Panel] - [Sound, Speech, and

Audio Device] - [SmartAudio] -

Recording].

, and then select [Voice

I: USB Port

Reference Manual “USB Devices”

ꢀ

Otherwise, only audio on the left track will be recorded.

J: External Antenna Connector

K: Expansion Bus Connector

O: Serial Port

P: RAM Module Slot

Reference Manual “Port Replicator / Car

Mounter”

L: External Display Port

ꢀ

Reference Manual “RAM Module”

Q: Speaker

ꢀ

Reference Manual “Key Combinations”

ꢀ

Reference Manual “External Display”

ꢀ

R: Ventilation Hole (Intake)

M: Headphone Jack

You can connect headphones or ampliﬁed speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of Parts

This computer contains a magnet and magnetic products at the locations

circled in the illustration at right. Avoid leaving metallic object or magnetic me-

dia in contact with these areas.

ꢂ

Attaching the stylus to the computer (only for model with touchscreen)

Use the tether to attach the stylus to the computer so you will not lose it.

There are holes (A) to attach it.

CAUTION

Do not pull the tether with excessive force. The stylus may hit the computer, person’s body or other objects when

released.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time Operation

Preparation

ꢁ

ACheck and identify the supplied accessories.

If you do not ﬁnd the described accessories, contact Panasonic Technical Support ( page 33).

ꢀ

• AC Adaptor. . . . . 1

• AC Cord . . . . . . . 1

• Battery Pack . . . 1

Model No: CF-AA5713A

Model No: CF-VZSU46AU

• Soft Cloth. . . . . . 1 • Tether . . . . . . . . . 1

• Stylus . . . . . . . . . 1

)

Reference Manual “Touchscreen”

(

ꢀ

• Operating Instructions (This book) . . . . . . . . . . . . . . . . . . . . . .1

• Product Recovery DVD-ROM Windows^®7 Professional . . . . .1

• Product Recovery DVD-ROM Windows^®XP Professional. . . .1

BRead the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging

(

ꢀ

page 27).

Inserting the Battery Pack

ASlide the latch (A) to the right to unlock the cover.

BSlide the latch (A) down, and open the cover.

CInsert the battery pack until it securely ﬁts the connector.

DClose the cover until it clicks.

ESlide the latch (B) to the left to lock the cover.

CAUTION

Make sure the latch is securely locked. Otherwise the battery pack may fall

when you carry the computer.

Do not touch the terminals of the battery pack and the computer. Doing so can

make the terminals dirty or damaged, and may cause malfunction of the battery

pack and the computer.

ꢂ

NOTE

Note that the computer consumes electricity even when the computer power is

off. If the battery pack is fully charged, the battery will fully discharge in the fol-

lowing period of time:

ꢂ

• When power is off: Approx. 4 weeks

• In sleep (

)/standby (

): Approx. 3 days^*1

• In hibernation: Approx. 6 days^*1

^*1If “Wake Up from wired LAN” is disabled, the period of time will be longer.

Opening the Display

APush and hold the latch (A), and lift open the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time Operation

Connect your computer to a power outlet.

The battery charging starts automatically.

CAUTION

Do not disconnect the AC adaptor and do not switch the wireless switch to on

until the ﬁrst-time operation procedure is completed.

When using the computer for the ﬁrst time, do not connect any peripheral device

except the battery pack and AC adaptor.

ꢂ

Handling the AC adaptor

Problems such as sudden voltage drops may arise during periods of thunder

and lightning. Since this could adversely affect your computer, an uninter-

ruptible power source (UPS) is highly recommended unless running from the

battery pack alone.

ꢃ

Turn on the computer.

ASlide and hold the power switch for approximately 1 second until the

power indicator lights.

CAUTION

Do not slide the power switch repeatedly.

The computer will forcibly be turned off if you slide and hold the power switch for

4 seconds or longer.

ꢂ

Once you turn off the computer, wait for 10 seconds or more before you turn on

the computer again.

ꢂ

Do not perform the following operation until the hard disk drive indicator

turns off.

Connecting or disconnecting the AC adaptor

Sliding the power switch

Touching the keyboard, touch pad or touchscreen (only for model with touchscreen)

Closing the display

ꢃ

Turn on/off the wireless switch

When the CPU temperature is high, the computer may not start up to prevent

overheating of the CPU. Wait until the computer cools down, and then turn the

power on again. If the computer does not power on even after cooling down,

ꢂ

contact Panasonic Technical Support ( page 33).

ꢀ

Any changes from the default setting of the Setup Utility must not be made until

the First-time Operation is completed.

Setup Windows.

Follow the on-screen instructions.

The computer restarts several times. Do not touch the keyboard or touch

ꢂ

pad, and wait until the hard disk drive indicator

has turned off.

After the computer is turned on, the screen remains black or unchanged for

a while. This is not a malfunction. Wait for a moment until the Windows setup

screen appears.

ꢂ

During setup of Windows, use the touch pad and clicking to move the cursor

and to click an item.

Setup of Windows will take approximately 20 minutes.

Go to the next step, conﬁrming each message on the display.

“Join a wireless network” screen may not appear.

ꢂ

You can set the Wireless Network after the setup of Windows is complete.

CAUTION

You can change the user name, password, image and security setting after

setup of Windows.

Remember your password. If you forget the password, you cannot use Win-

dows. Creating a password reset disk beforehand is recommended.

ꢂ

Wait until the hard disk drive indicator

has turned off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,

COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac-

count name) that includes the “@” mark, a password will be requested at the

log-on screen, even if no password has been set. If you try to log on without en-

tering a password, “The user name or password is incorrect.” may be displayed

ꢂ

and you will not be able to log on to Windows ( page 24).

ꢀ

The wallpaper for the ﬁrst logon user has already been preset on “5 Setup Win-

dows.” .

When using this computer under the Sun, the screen becomes easily viewable

by changing the wallpaper to the white wallpaper.

ARight-click on the desktop, and click [Personalize] - [Desktop Background].

BSelect [Solid Colors] at [Picture Location].

CSelect the white wallpaper and click [Save changes].

You cannot choose the following words for user name and password: CON,

PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.

When you set date/time/time zone and click [Next], the screen may not go to the

next step for a few minutes. Do not touch the keyboard or touch pad, and wait

until the screen changes.

ꢂ

If “An unexpected error has occurred ...” (or a similar message) is displayed,

click [OK]. This is not a malfunction.

ꢂ

Perform the touchscreen calibration.

Before performing the calibration, close Tablet PC Input Panel.

ꢂ

NOTE

At ﬁrst, log on to Windows as an administrator and perform this calibration.

AClick

(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-

ting].

BClick [Calibrate].

CUsing the stylus, touch each of the “+” target marks one by one, and then

click [Yes].

DClick [OK].

NOTE

Perform the following calibration for each user.

ꢂ

AClick

(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set-

ting].

BClick [Calibrate].

CUsing the stylus, touch each of the “+” target marks one by one, and then

click [Yes].

DClick [OK].

Perform the calibration for the orientation to be used.

ꢂ

AClick [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen

Calibration Utility].

BUsing the stylus, touch each of the 12 “+” target marks one by one until it

blinks, and then press

Enter

CPress

Enter

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time Operation

Create a new account.

Click [start] - [Control Panel] - [User Accounts] - [Create a new account].

CAUTION

Remember your password. If you forget the password, you cannot use the Win-

dows operating system. Creating a password reset disk beforehand is recom-

mended.

ꢂ

NOTE

PC Information Viewer

ꢂ

This computer periodically records the management information of the hard disk, etc. The maximum data volume for each

record is 1024 bytes.

This information is only used for estimating the cause in the case when the hard disk goes down by any possibility. They

are never sent to outside via network nor used for any other purpose except for the purpose described the above.

To disable the function, add the check mark for [Disable the automatic save function for management information history]

in [Hard Disk Status] of PC Information Viewer, and click [OK].

(

ꢀ

Reference Manual “Checking the Computer’s Usage Status”)

Precaution against Starting Up/Shutting Down

ꢁ

ꢂ

Do not do the following

Connecting or disconnecting the AC adaptor

Sliding the power switch

Touching the keyboard, touch pad, touchscreen (only for model with touchscreen), or external mouse

Closing the display

ꢃ

Turn on/off the wireless switch

NOTE

To conserve power, the following power saving methods are set at the time of purchase.

ꢂ

The screen automatically turns off after 15 minutes of inactivity.

ꢃ

The computer automatically enters sleep^*2(

)/standby^*2(

) after 20 minutes of inactivity.

^*2Refer to

Reference Manual “Sleep or Hibernation Functions” about resuming from sleep.

To change the partition structure

ꢁ

You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new parti-

tion. This computer has a single partition as default setting.

A Click

(Start) and right-click [Computer], then click [Manage].

A standard user needs to enter an administrator password.

ꢂ

B Click [Disk Management].

C Right-click the partition for Windows (“c” drive in the default setting), and click [Shrink Volume].

The partition size depends on the computer speciﬁcations.

ꢂ

D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].

You cannot input a larger number than the displayed size.

To select [Reinstall to the ﬁrst 2 partitions.] in reinstalling Windows 7 ( page 20), 30000

ꢂ

or more is nec-

ꢀ

essary for [Total size after shrink in MB].

E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume].

F Follow the on-screen instructions to make the settings, and click [Finish].

Wait until formatting is completed.

NOTE

You can create an additional partition using remaining unallocated space or newly creating unallocated space.

To delete a partition, right-click the partition and click [Delete Volume] in step C.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

On-screen Manual

You can access the Reference Manual and the Important Tips on the computer screen.

When you access the Reference Manual and the Important Tips for the ﬁrst time, the License Agreement of the Adobe

Reader may be displayed. Read it carefully and select [Accept] to proceed.

Reference Manual

ꢁ

The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.

To access the Reference Manual:

Double-click

on the desktop.

Alternatively click

(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Reference Manual].

ꢂ

Click [start] - [Reference Manual].

Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Reference Manual].

Important Tips

ꢁ

The Important Tips will provide you with the battery information so that you can use the battery pack in the optimum

condition to obtain longer operation time.

To access the Important Tips:

Double-click

on the desktop.

Alternatively click

(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

ꢂ

Double-click

on the desktop.

Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

NOTE

When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure and update.

See http://www.adobe.com/ for the latest version of Adobe Reader.

ꢂ

CAUTION

Do not remove the check mark for [IntelliMouse Wheel mode] in [Scroll Conﬁguration] of [Touch Pad] in [Mouse] of

ꢂ

[Control Panel]. The Adobe Reader scrolling function may not work correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Handling and Maintenance

Operation environment

Place the computer on a ﬂat stable surface. Do not place the computer upright or turn it over. If the computer is

exposed to an extremely strong impact, it may become damaged.

Temperature: Operation : 5 °C to 35 °C {41 °F to 95 °F}

ꢂ

Storage : -20°C to 60 °C {- 4 °F to 140 °F}

Humidity:

Operation : 30% to 80% RH (No condensation)

Storage : 30% to 90% RH (No condensation)

Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in

the product deterioration and will shorten the product life.

Do not place the computer in the following areas, otherwise the computer may be damaged.

ꢂ

Near electronic equipment. Image distortion or noise may occur.

In extremely high or low temperature.

ꢃ

As the computer can become hot during operation, keep it away from items that are sensitive to heat.

Handling cautions

This computer is designed to minimize shock to parts such as the LCD and the hard disk drive and equipped with a

drip-proof keyboard, but no warranty is provided against any trouble caused by shock. Be extremely careful when han-

dling the computer.

When carrying the computer:

ꢂ

Turn off the computer.

Remove all external devices, cables, PC Cards and other protruding objects.

Remove a disc in the CD/DVD drive.

Do not drop or hit the computer against solid objects.

Do not leave the display open.

Do not grip the display part.

ꢃ

Do not put anything (e.g., a piece of paper) between the display and keyboard.

When you board an airplane, take the computer with you and never put it in your checked luggage. When using the

computer on airplane, follow the airline’s instructions.

ꢂ

When carrying a spare battery, put it in a plastic bag to protect its terminals.

ꢂ

The touch pad is designed to be used by ﬁnger tip. Do not place any object on its surface and do not press down

strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).

Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.

Be careful not to get injured by dropping or getting hit when carrying the computer.

ꢂ

Use only the included stylus to touch the touchscreen. Do not place any object on its surface and do not press

down strongly with sharp-pointed or hard objects that may leave marks (e.g., nails, pencils and ball point pens).

Do not use the touchscreen when dust or dirt (e.g., oil) is on the screen. Otherwise foreign particles on the screen/

stylus can scratch the screen surface or obstruct the stylus operation.

Use the stylus only for touching the screen. Using it for any other purpose may damage the stylus and result in

scratches on the screen.

ꢂ

When using peripheral devices

ꢁ

Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction

manuals of the peripheral devices.

Use the peripheral devices conforming to the computer’s speciﬁcations.

Connect to the connectors in the correct direction.

If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.

If screws are included, fasten them securely.

ꢂ

Remove the cables when you carry the computer. Do not pull the cables forcibly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preventing your computer from unauthorized use via wireless LAN/Bluetooth/wireless WAN

ꢁ

Before using wireless LAN/Bluetooth/wireless WAN, make the appropriate security settings such as data encryp-

tion.

ꢂ

Maintenance

To clean the LCD panel

Use the soft cloth included with the computer.

NOTE

Suggestions About Cleaning the LCD Surface

ꢂ

To improve the outdoor visibility of the display, a low reﬂection coating has been added. In order to avoid scratches

and peeling of this coating, an approved soft cloth has been included to wipe the LCD surface of the computer.

Before using the computer, be sure to read the instructions provided below.

• Be sure to wipe the LCD display to remove ﬁngerprints, etc., with the soft cloth.

• Do not wipe areas other than the LCD display with the soft cloth.

• Use the soft cloth when it is dry. Do not apply water or solvents to the soft cloth.

• First, lightly wipe foreign particles and dust adhering to the LCD display on one side of the soft cloth. Do not use

force, since the LCD surface may be damaged with the foreign particles or dust.

Next, wipe off ﬁngerprint, etc., with the other side of the soft cloth.

After wiping off foreign particles and dust, wash the soft cloth (refer to the following) to remove the foreign par-

ticles and dust from the soft cloth.

• When the soft cloth becomes dirty, wash it with neutral detergent. Do not use bleach or a fabric conditioner (soft-

ener), or carry out sterilization by boiling.

• If the LCD gets wet, wipe the surface lightly with the soft cloth.

• While wiping the LCD display, the computer must be turned off.

Wipe with a soft dry cloth such as gauze.

To clean areas other than the LCD panel

Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it

thoroughly.

CAUTION

Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.

Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to

the surface.

ꢂ

Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause

malfunction or damage.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Reinstalling Software

Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk

data will be erased.

Back up important data to other media or an external hard disk before reinstallation.

CAUTION

Hard disk

Partition with boot files

(approximately 300 MB)

Do not delete the partition with boot ﬁles on the hard disk.

The disk space in the partition is not available to store data.

Area usable by Windows

Preparation

Prepare the following items:

ꢂ

The Product Recovery DVD-ROM (included)

Panasonic CD/DVD drive (optional)

ꢃ

Remove all peripherals (except for the CD/DVD drive).

Connect the AC adaptor and do not remove it until reinstallation is complete.

ꢂ

Turn off the computer and insert the CD/DVD drive into the multimedia pocket

Reference Manual “Multimedia Pocket”).

Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.

(

ꢀ

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

ꢂ

Write down all of the contents of the Setup Utility and press F9.

At the conﬁrmation message, select [Yes] and press

Enter

Press F10

At the conﬁrmation message, select [Yes] and press

Enter

Computer will restart.

Press F2 or Del while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

ꢂ

Set the Product Recovery DVD-ROM for Windows which you install into the CD/DVD

drive.

Select the [Exit] menu, then select [TEAC-DV-W28XXX] in [Boot Override].

Press Enter

The computer will restart.

Click [Reinstall Windows] and click [Next].

The License Agreement screen appears.

10 Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].

11 When reinstalling Windows 7 from Windows 7:

Select the settings and click [Next].

[Reinstall Windows to the whole Hard Disk to factory default.]

You will have two partitions.

ꢂ

[Reinstall to the ﬁrst 2 partitions.]^*1

ꢂ

Select this option when the hard disk has already been divided into several partitions. For how to create a

new partition, refer to “To change the partition structure” ( page 16).

ꢀ

You can keep the partition structure.

^*1This does not appear if Windows cannot be reinstalled to the partition containing boot ﬁles and the area us-

able by Windows.

When reinstalling Windows 7 from Windows XP:

Click [Next].

12 At the conﬁrmation message, click [YES].

Reinstallation starts according to the instructions on the screen. (It will take approximately 30 - 60 minutes.)

Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become

unavailable as Windows may not start up or the data may be corrupted.

ꢂ

13 Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer.

14 Turn on the computer.

If the password is requested, enter the Supervisor Password.

ꢂ

15 Perform the “First-time Operation” ( page 14).

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

16 Start the Setup Utility and change the settings as necessary.

17 Perform Windows Update.

Press

to execute [1. [Recovery]].

The License Agreement screen appears.

To cancel partway, press

ꢂ

10 Press

to select [1. Yes, I agree to the provisions above and wish to continue!].

11 Select the settings.

[2]: Enter the size of operating system partition and press

ꢂ

Enter

(The size of data partition will be determined by subtracting the operating system partition size from the

maximum size.)

[3]: Windows will be installed in the ﬁrst partition.

(The size of the ﬁrst partition must be 30

At the conﬁrmation message, press

or more. If smaller, installation will not be possible.)

Reinstallation starts automatically. (It will take approximately 30 - 75 minutes.)

Do not interrupt reinstallation, for example by turning off the computer or pressing

erwise reinstallation may become unavailable as Windows may not start up or the data may be corrupted.

. Oth-

ꢂ

Ctrl Alt Del

12 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-

puter.

If additional instructions are included with the computer, be sure to read them. It may be necessary to perform

additional operations during the following procedure.

ꢂ

13 Turn on the computer.

If the password is requested, enter the Supervisor Password.

ꢂ

14 Perform the “First-time Operation” ( page 14).

ꢀ

15 Start the Setup Utility and change the settings as necessary.

To change the drive letter of hard disk or CD/DVD drive

ꢁ

NOTE

Drive letters of hard disk can be changed only when two or more partitions have been created on the hard disk drive.

The name of the C: drive cannot be changed.

Change the drive letters before installing applications.

ꢂ

(Start)

Click

Management].

A standard user needs to enter an administrator password.

- [Control Panel] - [System and Security] - [Administrative Tools], and double-click [Computer

ꢃ

Click [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools], and double-click [Com-

puter Management].

BClick [Disk Management] from [Storage].

CRight-click the hard disk partition or the CD/DVD drive name, and click [Change Drive Letter and Paths...].

DClick [Change...].

EClick [Assign the following drive letter] and select the new drive letter, and then click [OK].

At the conﬁrmation message, click [Yes].

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Basic)

Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the

“Reference Manual”. For a software problem, refer to the software’s instruction manual. If the problem persists, contact

Panasonic Technical Support ( page 33). You can also check the computer’s status in the PC Information Viewer

ꢀ

(

ꢀ

Reference Manual “Troubleshooting (Advanced)”).

Starting Up

ꢁ

Connect the AC adaptor.

Insert a fully charged battery.

ꢂ

Cannot start up.

The power indicator or bat-

tery indicator is not lit.

Remove the battery pack and the AC adaptor, then connect them again.

If a device is connected to the USB port, disconnect the device, or set [USB Port] or

[Legacy USB Support] to [Disable] in the [Advanced] menu of the Setup Utility.

If a device is connected to the ExpressCard slot, disconnect the device, or set

[ExpressCard Slot] to [Disable] in the [Advanced] menu of the Setup Utility.

ꢂ

Press

Fn F8

to turn off the concealed mode.

ꢂ

The computer is warming up before start up. Wait for the computer to start up (takes

up to 32 minutes). If, “Cannot warm up the system” is displayed, the computer failed to

warm up and will not start. In this case, turn off the computer, leave it in an environment

of 5 °C {41 °F} or higher temperature for about an hour, and then turn on the power

again.

The power is turned on but

“Warming up the system (up

to 32 minutes)” appears.

Leave it in an environment of 5 °C {41 °F} or higher temperature for about an hour, then

turn on the power again.

ꢂ

Cannot turn on the computer.

The computer does not re-

sume from sleep

(

)/standby

(The power indicator blinks

quickly in green.)

Turn off the computer and remove the RAM module, then conﬁrm whether the RAM

module has compliant to speciﬁcation. When the RAM module has conformed to speciﬁ-

cation, install it again.

ꢂ

After adding or changing

the RAM module, the power

is turned on but nothing is

displayed on the screen.

Slide and hold the power switch for four seconds or longer to shut down the computer

forcibly. (Data not saved will be lost.) Then disable the screen saver.

The computer does not

enter sleep mode while the

screen saver is running. (The

screen stays black.)

Supervisor Password or User Password: Contact Panasonic Technical Support

ꢂ

You have forgotten the pass-

word.

(

page 33).

ꢀ

Administrator password:

If you have a password reset disk, you can reset the administrator password. Set the

disk and enter any wrong password, then follow the on-screen instructions and set a

new password.

ꢃ

If you do not have a password reset disk, reinstall ( page 20) and set up Windows,

ꢃ

ꢀ

and then set a new password.

A ﬂoppy disk is in the drive (optional) and it does not contain system startup information.

Remove the ﬂoppy disk and press any key.

ꢂ

“Remove disks or other

media. Press any key to

restart” or a similar message

appears.

If a device is connected to the USB port, disconnect the device, or set [USB Port] or

[Legacy USB Support] to [Disable] in the [Advanced] menu of the Setup Utility.

If a device is connected to the ExpressCard slot, disconnect the device, or set

[ExpressCard Slot] to [Disable] in the [Advanced] menu of the Setup Utility.

If the problem persists after removing the disk, it may be a hard disk failure. Contact

ꢂ

Panasonic Technical Support ( page 33).

ꢀ

Windows startup and opera-

tion is slow.

Press

in the Setup Utility (

Reference Manual “Setup Utility”) to return the

ꢂ

ꢀ

Setup Utility settings (excluding the passwords) to the default values. Start the Setup

Utility and make the settings again. (Note that the processing speed depends on the ap-

plication software, so this procedure may not make Windows faster.)

If you installed a resident software after purchase, turn off the residence.

Disable Indexing Service in the following menu.

ꢂ

Click [start] - [Search] - [Change preferences] - [With Indexing Service (for faster local

service)].

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting Up

ꢁ

Make the correct settings.

ꢂ

The date and time are incor-

rect.

Click

and Time].

- [Control Panel] - [Clock, Language, and Region] - [Date

(Start)

Click [start] - [Control Panel] - [Date, Time, Language, and Regional

Options] - [Date and Time].

If the problem persists, the internal clock battery may need to be replaced. Contact

Panasonic Technical Support ( page 33).

ꢀ

When the computer is connected to LAN, check the date and time of the server.

The 2100 A.D. or later year will not be correctly recognized on this computer.

ꢂ

The Battery Recalibration was cancelled before Windows was shut down last time. To

start up Windows, turn off the computer by the power switch, and then turn on.

ꢂ

[Executing Battery Recali-

bration] screen appears.

Select [Enabled] in [Password On Resume] in the [Security] menu of the Setup Utility (

Reference Manual “Setup Utility”).

The Windows password can be used instead of the password set in the Setup Utility.

ꢂ

ꢀ

[Enter Password] does not

appear when resuming from

sleep (

standby (

hibernation.

A Click

move user accounts] and select the account, and set the password.

B Click

(Start) - [Control Panel] - [System and Security] - [Power Option] - [Require

(Start) - [Control Panel] - [User Accounts and Family Safety] - [Add or re-

a password when the computer wakes] and add a check mark for [Require a pass-

word].

A Click [start] - [Control Panel] - [User Accounts] and select the account, and set the

password.

B Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -

[Advanced] and add a check mark for [Prompt for password when computer resumes

from standby].

An error may occur when the computer automatically enters the sleep (

)

Cannot resume.

ꢂ

/ standby (

) or hibernation mode while the screensaver is active. In this

case, turn off the screensaver or change the pattern of the screensaver.

Other startup problems.

Press in the Setup Utility ( Reference Manual “Setup Utility”) to return the

ꢀ

Setup Utility settings (excluding the passwords) to the default values. Start the Setup

Utility and make the settings again.

Remove all peripheral devices.

Check to see if there was a disk error.

ꢂ

A Remove all peripheral devices including external display.

B Click

C Click [Tools] - [Check Now...].

(Start) - [Computer] and right-click [Local Disk (C:)], and click [Properties].

A standard user needs to enter an administrator password.

ꢃ

D Select the option in [Check disk options] and click [Start].

E Click [Schedule disk check] and restart the computer.

A Click [start] - [My Computer] and right-click [Local Disk(C:)], and click [Properties].

B Click [Tools] - [Check Now].

C Select the option in [Check disk options] and click [Start].

Start the computer in Safe Mode and check the error details. When the [Panasonic] boot

ꢂ

screen disappears^*1at startup, press and hold

until the Windows Advanced Options

Menu is displayed. Select the Safe Mode and press

Enter

When [Password on boot] is set to [Enabled] in the [Security] menu of the Setup Utility,

[Enter Password] appears after the [Panasonic] boot screen disappears. As soon as you

enter the password and press

, press and hold

Enter

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Basic)

Entering Password

ꢁ

The computer may be in ten-key mode.

ꢂ

On the [Enter Password]

screen, the password cannot

be entered.

If the NumLk indicator

input.

lights, press

to disable the ten-key mode, and then

NumLk

The computer may be in ten-key mode.

ꢂ

Even after entering the pass-

If the NumLk indicator

input.

lights, press

to disable the ten-key mode, and then

NumLk

)/Locked

)/Type your

word

(

The computer may be in Caps Lock mode.

password

is displayed again.

If the Caps Lock indicator

mode, and then input.

lights, press

to disable the Caps Lock

Caps Lock

The user name (account name) includes the “@” mark.

- If another user account name exists:

Log on to Windows using another user account name, and delete the account name

that includes “@”. Then create a new account name.

- If no other account name exists:

ꢂ

Cannot log on to Windows.

(“The user name or pass-

word is incorrect.” is dis-

played.)

You need to reinstall Windows ( page 20).

ꢀ

Shutting down

ꢁ

Remove the USB device and the ExpressCard.

Wait 1 or 2 minutes. It is not a malfunction.

ꢂ

Windows does not shut

down.

Display

ꢁ

No display.

The external display is selected. Press

Fn F3

^*2to switch the display. Wait

ꢂ

until the display has been switched completely before pressing

Fn F3

again.

When using an external display,

Check the cable connection.

Turn on the display.

Check the settings of external display.

ꢃ

The display is turned off by the power-saving function. To resume, do not press the

ꢂ

direct selection keys, but press any other key like

Ctrl

The computer entered sleep (

) /standby (

) or hibernation by

ꢂ

the power-saving function. To resume, press the power switch.

Windows 7 only

The screen is dark.

The screen is darker when the AC adaptor is not connected. Press

and adjust

ꢂ

Fn F2

the brightness. As you increase the brightness, battery consumption increases.

You can separately set the brightness for when the AC adaptor is connected and when

not connected.

Press

Fn F8

to turn off the concealed mode.

ꢂ

The brightness is set low to avoid malfunction where surrounding temperature is high.

The screen does not be-

Use it in an environment of between 5 ° and 35 ° {41 ° to 95 ° }.

come bright even if pressing

Fn F2

Changing the number of display colors and resolution may affect the screen. Restart the

computer.

Connecting/disconnecting an external display may affect the screen. Restart the com-

puter.

ꢂ

The screen is disordered.

When using the Extended Desktop, use the same display colors for the external display

as those used by the LCD.

If you continue to experience problems, try changing the display.

ꢂ

During Simultaneous display,

one of the screens becomes

disordered.

Right-click on the desktop, and click [Graphics Properties] - [Display Devices].

Clicking [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver

for Mobile] - [Display Devices].

When the [Command Prompt] is set to “Full Screen” by pressing

, the picture is displayed on one of the screens only. When the window display is

ꢂ

Alt

Enter

restored by pressing

, the picture is displayed on both screens.

Alt Enter

Simultaneous display cannot be used until Windows startup is complete (during Setup

Utility, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

Display

ꢁ

If the external display does not support the power saving function, it may not work nor-

mally when the computer enters the power saving mode. Turn off the external display.

ꢂ

The external display does

not work normally.

Operate the following steps.

The cursor cannot be con-

trolled properly.

A Restart the computer and press

F2 Del

while [Panasonic] boot screen is dis-

played.

B Set [GPS] to [Disable] in the sub-menu of [Serial and Parallel Port Settings] in the

[Advanced] menu of the Setup Utility.

C Press

and select [Yes] at the conﬁrmation message, and press

The computer will restart.

Enter

F10

D Log on to Windows as an administrator.

E Click

(Start) and input “c:\util\drivers\gps\GPSVista.reg” in [Start Search], and

press

Enter

F Click [Yes], click [Yes], and click [OK].

Then restart the computer.

G Press

while [Panasonic] boot screen is displayed.

H Set [GPS] to [Enable] in the sub-menu of [Serial and Parallel Port Settings] in the

[Advanced] menu.

I Press

and select [Yes] at the conﬁrmation message, and press

Enter

F10

Touch Pad / Touchscreen (only for model with touchscreen)

ꢁ

When using the external mouse, connect it correctly.

Restart the computer using the keyboard.

ꢂ

The cursor does not work.

Press

and press

two times, and press

to select [Restart] and press

ꢄ

ꢀ

Enter

, and to select [Restart].

If the computer does not respond to keyboard commands, read “No response”

ꢂ

(

ꢀ

page 26).

Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.

ꢂ

Cannot input using the touch

pad.

The drivers for some mice may disable the touch pad. Check your mouse’s operating instructions.

Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup Utility.

Cannot input using the touchscreen.

ꢂ

Set [Touchscreen Mode] to [Auto] or [Touchscreen Mode] in the [Main] menu of the Setup

Utility.

Perform the touchscreen calibration ( page 15).

ꢂ

ꢀ

Cannot point the correct posi-

tion using the included stylus.

Reference Manual

ꢁ

Install Adobe Reader.

A Log on to Windows as an administrator.

ꢂ

The Reference Manual is

not displayed.

Click

(Start) and input “c:\util\reader\Setup.exe” in [Search programs and ﬁles]

then press

Enter

C Update Adobe Reader to its latest version.

If your computer is connected to the internet, start up Adobe Reader and click [Help]

- [Check for Updates...].

Click [start] - [Run], input [c:\util\reader\Setup.exe], then click [OK].

C Update Adobe Reader to its latest version.

If your computer is connected to the internet, start up Adobe Reader and click [Help]

- [Check for updates now].

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Basic)

Others

ꢁ

No response.

Press

to open Task Manager and close the software application

ꢂ

Ctrl Shift Esc

that is not responding.

An input screen (e.g., password input screen at startup) may be hidden behind another

window. Press to check.

Slide the power switch for 4 seconds or longer to shut down the computer, and then slide the

power switch to turn it on. If the application program does not work normally, uninstall and

reinstall the program. To uninstall,

Alt Tab

click

(Start) - [Control Panel] - [Programs] - [Uninstall a program].

click [start] - [Control Panel] - [Add or Remove Programs].

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED USE LICENSE AGREEMENT

THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC PRODUCT (“PRODUCT”)

ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH

THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY

DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.

Panasonic Corporation has developed or otherwise obtained the Programs and hereby licenses their use to you. You

assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intend-

ed results, and for the installation, use and results obtained therefrom.

LICENSE

A. Panasonic Corporation hereby grants you a personal, non-transferable and non-exclusive right and license to use

the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are

receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain

no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms,

concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of

which title, ownership and rights shall remain with Panasonic Corporation or its suppliers.

B. You may use the Programs only on the single Product which was accompanied by the Programs.

C. You and your employees and agents are required to protect the conﬁdentiality of the Programs. You may not distrib-

ute or otherwise make the Programs or related documentation available to any third party, by time-sharing or other-

wise, without the prior written consent of Panasonic Corporation.

D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for

any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your

use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or at-

tempt to modify, the Programs.

E. You may transfer the Programs and license them to another party only in connection with your transfer of the single

Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also

transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation,

to the same party or destroy any such copies not so transferred.

F. You may not remove any copyright, trademark or other notice or product identiﬁcation from the Programs and you

must reproduce and include any such notice or product identiﬁcation on any copy of any Program.

YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE

THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.

YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN

WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.

IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PER-

MITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.

TERM

This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may termi-

nate this license at any time by destroying, at your expense, the Programs and related documentation together with

all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions

thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon

any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all

copies thereof in any form.

YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND

BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-

MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,

ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-

TER OF THIS AGREEMENT.

GOVERNMENT RESTRICTED RIGHTS.

The Software is provided with “RESTRICTED RIGHTS.” Use duplication or disclosure by the government is subject

to restrictions as set forth in FAR52.227-14 and DFAR252. 227-7013 et seq. or their successors.

Use of the Software by the government constitutes acknowledgement of Intel’s proprietary rights therein.

Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contrat de licence d’usage limité

Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic (le “Produit”) sont exclusivement concédés en

licence à l’utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cides-

sous. En utilisant les logiciels, vous vous engagez de manière déﬁnitive à respecter les termes, clauses et conditions

des présentes.

Panasonic Corporation a mis au point ou obtenu les Logiciels et vous en concède l’utilisation par les présentes. Vous

assumez l’entière responsabilité du choix de ce Produit (y compris des Logiciels associés) pour obtenir les résultats

escomptés, ainsi que de l’installation, de l’utilisation et des résultats obtenus.

Licence

A. Panasonic Corporation vous octroie par les présentes le droit et la licence personnels, non cessibles et non exclu-

sifs d’utiliser les Logiciels conformément aux termes, clauses et conditions de ce contrat. Vous reconnaissez ne

recevoir qu’un droit limité d’utiliser les Logiciels et la documentation les accompagnant et vous vous engagez à n’

obtenir aucun droit de titre, propriété ni aucun autre droit vis-à-vis des Logiciels et de la documentation les accom-

pagnant ni vis-à-vis des algorithmes, concepts, dessins, conﬁgurations et idées représentés par ou incorporés dans

les Logiciels et la documentation les accompagnant, dont les titres, propriété et droits resteront tous à Panasonic

Corporation ou à leurs propriétaires.

B. Vous ne pouvez utiliser les Logiciels que sur le Produit unique qui est accompagné par les Logiciels.

C. Vous et vos employés ou agents êtes requis de protéger la conﬁdentialité des Logiciels. Vous ne pouvez ni dis-

tribuer ni mettre les Logiciels et la documentation les accompagnant à la disposition d’un tiers, par partage de

temps ou de quelque autre manière que ce soit, sans l’autorisation écrite préalable de Panasonic Corporation.

D. Vous ne pouvez ni copier ni reproduire ni permettre la copie ni la reproduction des Logiciels ni de la documenta-

tion les accompagnant pour quelque ﬁn que ce soit, à l’exception d’une (1) copie des Logiciels à des ﬁns de sau-

vegarde uniquement pour soutenir votre utilisation des Logiciels sur le Produit unique qui est accompagné par les

Logiciels. Vous ne pouvez ni modiﬁer ni tenter de modiﬁer les Logiciels.

E. Vous ne pouvez céder les Logiciels et en octroyer la licence à une autre partie qu’en rapport avec votre cession du

Produit unique qui est accompagné par les Logiciels à cette autre partie. Au moment de cette cession, vous devez

céder également toutes les copies, que ce soit sous forme imprimée ou lisible par la machine, de tous les Logiciels

ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées.

F. Vous ne pouvez retirer aucune marque de droits d’auteur, marque de commerce ou autre ni aucune identiﬁcation

de produit des Logiciels et vous devez reproduire et inclure toutes ces notices ou identiﬁcations de produit sur

toutes les copies des Logiciels.

Vous ne pouvez assembler en sens inverse, compiler en sens inverse ni retracer les Logiciels ni aucune de leurs cop-

ies, de façon électronique ou mécanique, en tout ou en partie.

Vous ne pouvez utiliser, copier, modiﬁer, altérer ni céder les Logiciels ni aucune de leurs copies, en tout ou en partie, à

l’exception de ce qui est expressément stipulé dans ce contrat.

Si vous cédez la possession de toute copie ou de tout Logiciel à une autre partie, à l’exception de ce qui est autorisé

au paragraphe E ci-dessus, votre licence est automatiquement résiliée.

Termes, clauses et conditions

Cette licence n’est effective que pour la durée de possession ou de crédit-bail du Produit, à moins d’une résiliation an-

térieure. Vous pouvez résilier cette licence à tout moment en détruisant, à vos frais, les Logiciels et la documentation

les accompagnant avec toutes leurs copies, sous quelque forme que ce soit. Cette licence sera également résiliée,

avec application immédiate, si les conditions de résiliation déﬁnies ailleurs dans ce contrat se sont réalisées ou si vous

ne respectez pas les termes, clauses et conditions qui y sont contenues. Au moment de la résiliation, vous acceptez

de détruire, à vos frais, les Logiciels et la documentation les accompagnant avec toutes leurs copies, sous quelque

forme que ce soit.

Vous reconnaissez avoir lu ce contrat, en avoir compris toute la substance et avoir accepté de respecter ses termes,

clauses et conditions. Vous reconnaissez en outre qu’ils sont la description complète et exclusive du contrat conclu

entre nous, contrat qui remplace et annule toute proposition ou contrat précédent, écrit ou oral, et toute autre commu-

nication entre nous, relativement à l’objet du présent contrat.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

This page provides the speciﬁcations for the basic model.

The model number is different according to the unit conﬁguration.

To check the model number:

Check the bottom of the computer or the box the computer came in at the time of purchase.

To check CPU speed, memory size and the hard disk drive (HDD) size:

ꢂ

Run the Setup Utility (

Reference Manual “Setup Utility”) and select [Information] menu.

ꢀ

[CPU Speed]: CPU speed, [Memory Size]: Memory size, [Hard Disk]: Hard disk drive size

Main Speciﬁcations

ꢁ

Model No.

CF-31ATNAXDM / CF-31ATNAXPM

CF-31ATAAXDM / CF-31ATAAXPM

GHz

CPU/Secondary cache memory Intel Core i5-540M (2.53

, Intel Smart

Intel Core i5-520M (2.4

, Intel Smart

MB^*1

)

Cache 3

)

Cache 3

Chip Set

Mobile Intel^®QM57 Express Chipset

ATI Mobility Radeon^TMHD 5650

Video controller

Main Memory^*2

Video Memory

(Built-in Chip Set)

GB^*1

, DDR3 SDRAM (8

Max.)

MB^*1

Max. / 1435 Max. with

512

dedicated (1423

Max. / 1915

Max.)^*3

UMA (763

with expanded memory)

expanded memory)^*3

MB^*1

GB^*4

MB^*1

UMA (1024

Max.)^*3

512

250

dedicated (1024

(Serial ATA)

GB^*4

Hard Disk Drive

Display Method

160

(Serial ATA)

MB^*4

is used as a partition with re-

Approx. 300

is used as a partition with re- Approx. 300

covery tools. (Users cannot use this partition.) covery tools. (Users cannot use this partition.)

13.1 XGA type (TFT) (1024 × 768 dots) with Touchscreen or 13.1 XGA type (TFT) (1024 × 768

dots)

Internal LCD

External Display^*6

Wireless LAN^*7

Bluetooth™^*8

LAN

65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots)^*5

65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots/1280 × 768 dots/1280 × 1024 dots)

Intel^®Centrino^®Advanced-N 6200 AGN ( page 30)

ꢀ

page 30

ꢀ

IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T

(2nd LAN^*15: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX)

Modem^*9

Sound

Data: 56

kbps

(V.92) FAX: 14.4

WAVE and MIDI playback, Intel^®High Deﬁnition Audio subsystem support

Security Chip

TPM (TCG V1.2 compliant)^*10

mA mA

Card Slots

PC Card Slot

x 1, Type I or Type II, Allowable current 3.3 : 400

, 5 : 400

ExpressCard Slot x 1, ExpressCard/34 or ExpressCard/54

SD Memory Card x 1

Slot^*11

Contact Smart

Card Slot^*12

x 1

RAM Module Slot

Interface

x 1, DDR3 SDRAM, 204-pin, 1.5 , SO-DIMM, PC3-8500 Compliant

USB Ports (4-pin, USB 2.0)^*13x 4 / Serial Port (Dsub 9-pin male) / Modem Port (RJ-11)^*9/ LAN

Port (RJ-45) x 1^*14or x 2^*15/ External Display Port (Mini Dsub 15-pin female) / HDMI Port (Type

A)^*16/ IEEE1394a Interface Connector (4-pin)^*17/ Microphone Jack (Miniature jack, 3.5 DIA) /

Headphone Jack (Miniature jack, 3.5 DIA, Impedance 32 , Output Power 4

× 2, Stereo) /

Expansion Bus Connector (Dedicated 100-pin female)

Keyboard / Pointing Device

Fingerprint Reader^*18

Web Camera^*19

87 keys / Touch Pad

Array Size : 192 x 4 pixels, Image Size : 192 x 512 pixels, Image Resolution : 508 DPI

640 x 480 dots, 30 fps

Power Supply

AC adaptor or Battery pack

AC Adaptor^*20

Input: 100 to 240 AC, 50 /60 , Output: 15.6 DC, 7.05

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Main Speciﬁcations

ꢁ

/ Minimum 8.1

Battery Pack

Li-ion 10.65 , Typical 8.55

Operating Time^*21

Approx. 11.5 hours^*22

Approx. 10 hours^*22

Approx. 11.5 hours

Approx. 10 hours

Charging Time^*23

Power Consumption^*24

Power on : Approx. 4.5 hours / Power off : Approx. 3.5 hours

W^*25W^*25

/ Approx. 100 (maximum

Approx. 55

/ Approx. 100 (maximum

Approx. 45

when recharging in the ON state)

mm mm mm

{11.9" × 11.5" × 2.9"}

Physical Dimensions (W × D × H) 302

(including the carrying handle)

× 292

× 73.5

{Approx. 8.2 .}

Weight (including the hand strap) Approx. 3.72

°C

°F

to 95 }

Operating Temperature

Humidity

to 35

30 % to 80 %

°C °C

{41

°F

}

Storage

Temperature

Humidity

-20

to 60

RH {-4

to 140

30 % to 90 % RH (No condensation)

Software

OS^*26

ꢁ

Genuine Windows^®7 Professional

Genuine Windows^®XP Professional Service

Pack 3

Pre-installed Software

Adobe Reader, PC Information Viewer, Loupe Utility, Display Selector, Bluetooth™ Stack for

Windows^®by TOSHIBA^*8, Wireless Switch Utility, Intel^®PROSet / Wireless Software^*7, Wireless

Connection Disable Utility^*27, Hotkey Settings, Battery Recalibration Utility, Inﬁneon TPM Pro-

fessional Package^*27, Protector Suite QL^{*17 *27}, Aptio Setup Utility, Hard Disk Data Erase Utility^*28

PCDiagnostic Utility, Concealed mode Utility^*29

Panasonic Power Plan Extension Utility

Icon Enlarger, Power Saving Utility

Wireless LAN^*7

ꢁ

*30

Mbps

Data Transfer Rates

IEEE802.11a : 54/48/36/24/18/12/9/6

Mbps

IEEE802.11g : 54/48/36/24/18/12/9/6

(automatically switched)

*30

IEEE802.11b : 11/5.5/2/1

(automatically switched)

*30

Mbps

(automatically switched)

IEEE802.11n^*31: (HT20) GI^*32= 400ns: 144.4/130/115.6/86.7/72.2/65/57.8/43.3/39/28.9/21.7/

*30

Mbps

14.4/7.2

(automatically switched)

GI^*32= 800ns: 130/117/104/78/65/58.5/52/39/26/19.5/13/6.5

Mbps

(HT40) GI^*32= 400ns: 300/270/240/180/157.5/135/120/90/60/30/15

(automatically switched)^*30

Mbps

GI^*32= 800ns: 270/243/216/162/135/121.5/108/81/54/40.5/27/13.5

Mbps

Standards Supported

Transmission method

Wireless Channels Used

IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n

OFDM system, DSSS system

IEEE802.11a : Channels 36/40/44/48/52/56/60/64/100/104/108/112/116/132/136/140/149/153/

157/161/165

IEEE802.11b/IEEE802.11g : Channels 1 to 11

IEEE802.11n : Channels 1-11/36/40/44/48/52/56/60/64/100/104/108/112/116/132/136/140/149/

153/157/161/165

GHz

RF Frequency Band

IEEE802.11a : 5.18

- 5.32

, 5.5

- 5.7

, 5.745

GHz

- 5.825

GHz

IEEE802.11b/IEEE802.11g : 2.412

- 2.462

GHz

, 5.745

IEEE802.11n : 2.412

5.825

- 2.462

, 5.18

- 5.32

, 5.5

- 5.7

Bluetooth^TM

ꢁ

Bluetooth Version

version 2.1 +EDR

FHSS system

Transmission method

Wireless Channels Used

RF Frequency Band

Channels 1 to 79

GHz

2.402

= 1,048,576 bytes /1

- 2.48

= 1,073,741,824 bytes

= 1,024 bytes / 1

Memory size of the factory default depends on the model.

You can physically expand the memory up to 8

the actual system conﬁguration.

, but the total amount of usable memory available will be less depending on

A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video

Memory cannot be set by the user. The size of Video memory is allotted depending on the operating system.

Download from Www.Somanuals.com. All Manuals Search And Download.

= 1,000,000,000 bytes. Your operating system or some application software will report as fewer

= 1,000,000 bytes / 1

MB GB

*10

A 16,777,216 color display is achieved by using the dithering function.

Display may be impossible using some connected external displays.

Only for model with wireless LAN.

Only for model with Bluetooth.

Only for model with modem.

For information on TPM, refer to the Installation Manual of “TrustedPlatform Module (TPM)” by the following procedure.

Click

(Start) and input “c:\util\drivers\tpm\README.pdf” in [Search programs and ﬁles] and press

Enter

Click [start] - [Run] and input “c:\util\drivers\ tpm\README.pdf” and click [OK].

*11

This slot is compatible with High-Speed Mode. Operation has been tested and conﬁrmed using Panasonic SD/SDHC Memory

Only for model with Smart Card slot.

Does not guarantee operation of all USB-compatible peripherals.

Only for model without 2nd LAN.

Only for model with 2nd LAN.

Does not guarantee operation of all HDMI-compatible peripherals.

Only for model with IEEE 1394a interface.

Only for model with Fingerprint reader.

Only for model with Web Camera.

Cards with a capacity of up to 8

. Operation on other SD equipment is not guaranteed.

*12

*13

*14

*15

*16

*17

*18

*19

*20

The AC adaptor is compatible with power sources up to 240 AC adaptor. This computer is supplied with a 125 AC compat-

ible AC cord.

20-M-2-1

Measured with LCD brightness : 60 cd/m²

*21

*22

Varies depending on the usage conditions, or when an optional device is attached.

When ATI Mobility Radeon^TMHD 5650 video controller is activated:

Approx. 7.5 hours

Approx. 7 hours

*23

*24

Varies depending on the usage conditions, CPU speed, etc.

Approx. 0.8 when the battery pack is fully charged (or not being charged) and the computer is off.

Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.2 ) simply by having the AC adaptor

plugged into an AC outlet.

Rated power consumption.

*25

*26

23-E-1

Operations of this computer are not guaranteed except for the pre-installed OS and the OS which is installed by using the Prod-

uct Recovery DVD-ROM provided by Panasonic.

Some parts of the software in the Product Recovery DVD-ROM may not be installed depending on a model.

Must be installed before use.

*27

*28

*29

*30

The Product Recovery DVD-ROM is required.

Concealed Mode may not work property during battery recalibration.

These are speeds speciﬁed in IEEE802.11a+b+g+n standards.

Actual speeds may differ.

Available when set to “WPA-PSK”, “WPA2-PSK” or “none”.

Only available when HT40 enabled by the computer and access point which associated supports HT40.

*31

*32

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

For U.S.A.

Panasonic Solutions Company - Worldwide Product Warranties

Section 1: Limited Warranty - Hardware

Panasonic Solutions Company (referred to as “Panasonic”) will repair the products listed below with new or rebuilt parts, free of

charge in the U.S.A. or other Panasonic approved location for the period speciﬁed below from the date of original purchase in the

event of a defect in materials or workmanship. These warranties are extended solely to the original purchaser. A purchase receipt or

other proof of date of original purchase will be required before warranty performance is rendered.

•

Laptop Computers – 3 Years

PDRC - LCD and Keyboard Assemblies – 3 Years

MDWD – Mobile Computer and Wireless Display Assemblies (CF-07/CF-08) - 3 Years

Ultra-Mobile PC (CF-U1/CF-H1) – 3 Years

Hand-held Computers (P1/P2) – 1 Year

Arbitrator Video Camera – 1 Year

Arbitrator Recorder Unit – 1 Year

Arbitrator Remote Control Panel – 1 Year

Arbitrator Wireless Receiver Unit – 1 Year

Arbitrator P2 Card(s) (All Sizes) – 1 Year

Arbitrator Wireless Microphone(s) / Transmitter – 90 Days

Arbitrator System Component Interconnect Cables – 90 Days

Battery Warranty

The battery supplied with the product is covered under the warranty for one (1) year from date of purchase, except as excluded

in Section 3. Batteries purchased separately are covered under the warranty for one (1) year from the date of purchase. A battery

furnished under the warranty is covered for the remaining period of the one year warranty on the original or purchased battery.

Wireless Module Warranty

Panasonic approved wireless modems installed in Panasonic brand computers and integrated by Panasonic or an Authorized Pana-

sonic Wireless Integrator are covered under the warranty for the remaining warranty period of the computer in which the modem

is installed. For computers with less than three (3) months remaining on the unit warranty, the wireless modem will be covered for

a period of three (3) months from the date of installation of the modem, covering only modem replacement or modem installation

related issues.

All modems must be approved by the wireless carrier prior to use. Any use or attempted use of a wireless modem not approved and

activated by the carrier for use on their network is strictly prohibited and is not sanctioned or warranted by Panasonic and may result

in legal action. In addition, all modems must be approved by Panasonic as compatible with the computer hardware before installa-

tion or use.

Panasonic’s sole responsibility for the warranty or technical support of the software required to install or operate the modem is

deﬁned in Section 2 (Limited Software Warranty). Any attempted software installation by anyone other than a Panasonic Authorized

Wireless Integrator is not covered under warranty and may result in service charges to re-image or replace the hard drive.

Installation or attempted installation by any party other than Panasonic or an Authorized Panasonic Wireless Integrator is strictly not

covered under the warranty and may void the computer warranty if damage results.

Options and Accessories warranties

The below listed Panasonic brand or supplied options and accessories are covered under this limited warranty for the period speci-

ﬁed from the date of purchase or as speciﬁcally stated:

•

AC Adaptor / Power Cord – 3 Years

Memory Card (Panasonic Brand) – 3 Years

Car Mount Docking Station PCB or Complete Vehicle Docking Station – 3 Years

Port Replicator / I-O Box / Device Cradle (like CF-08) – 3 Years

Antenna Pass-through Cable – 3 Years

Backlit or Full-sized keyboard - 3 Years or assumes warranty of the unit in which it is installed

Integrated Panasonic supplied options and kits including, but not limited to Wireless WAN, Media Bay Drives (Floppy,

CD/DVD, Combo), GPS, Bluetooth, Smartcard Reader, Magnetic Card Reader, Barcode Scanner and Fingerprint readers – 3

Years or assumes warranty period of the unit in which it is installed provided the integration was performed by Panasonic or

an Authorized Options Integrator.

•

Hard Drive (separately purchased) – 1 Year

External USB Drives (CD / DVD / Floppy / Hard Drive) – 1 Year

Optional Battery – 1 Year

Battery Charger / Multi-Bay Battery Charger – 1 Year

Stylus – 90 Days (physical damage excluded)

Download from Www.Somanuals.com. All Manuals Search And Download.

Section 2 - Limited Warranty - Software

Panasonic Solutions Company (referred to as “Panasonic”) warrants to you only that the disk(s) or other media on which the Pro-

grams are furnished will be free from defects in material and workmanship under normal use for a period of sixty (60) days from the

date of delivery thereof to you, as evidenced by your purchase receipt.

This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Programs will

meet your requirements or that the operation of the Programs will be uninterrupted or error free. Panasonic shall have no obligation

for any defects in the disk(s) or other media on which the Programs are furnished resulting from your storage thereof, or for defects

that have been caused by operation of the disk(s) or other media

Panasonic’s entire liability and your exclusive remedy under this warranty shall be limited to the replacement, in the United States

or other Panasonic designated location, of any defective disk or other media which is returned to Panasonic’s Authorized Service

Center, together with a copy of the purchase receipt, within the aforesaid warranty period. The customer is responsible for ensuring

that all data is backed up and made secure during normal use and before sending a unit for service.

Section 3 - Limited Warranty Exclusions

Speciﬁcally excluded from the warranty are:

•

All consumable items; such as screen protection ﬁlms, logo badges, labels, cleaning cloths, carry cases, manuals, cables,

straps, belts, holsters, tethers, and harnesses and any other options and accessories not listed above or covered under a

separate warranty.

•

Failures related to the product operating system, hard drive image, software setup, software program, virus, other program(s)

or ﬁle(s) on the hard drive or in any computer memory location.

•

Failures due to BIOS settings or changes, as well as any cosmetic or physical damage to the unit.

Any unit or device with a missing or altered model number or serial number label

Damage which occurs in shipment

Failures which are caused by products not supplied by Panasonic

Failures which result from alteration, accident, misuse, introduction of liquid or other foreign matter into the unit, abuse, ne-

glect, installation, maladjustment of consumer controls, improper maintenance or modiﬁcation, use not in accordance with

product use instructions

•

Failures due to service by anyone other than a Panasonic Authorized Service Provider

Failures caused by improper integration by any company other than Panasonic or a Panasonic Authorized Integrator.

Damage, failure, or loss due to the unit being stolen, lost, misplaced, or used by anyone other than the original purchaser

Damage that is attributable to acts of God

This warranty only covers failures due to defects in materials or workmanship which occur during normal use.

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-

TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS^*1. PANASONIC WILL NOT BE RESPONSIBLE

FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems

when used during critical phases of ﬂight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Sys-

tems and 2 EFB Systems are deﬁned by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaﬂets)

No.36

Other Limits and Exclusions: There are no other express warranties except as listed above.

PANASONIC SHALL NOT BE LIABLE FOR LOSS OF DATA OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES RE-

SULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND

IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-

POSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion

or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or

exclusions may not apply to you.

This limited warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state.

For technical support or to arrange for service on your Panasonic computer product, call our toll-free hotline at 1-800-

LAPTOP5.

DIAL TOLL FREE: 1-800-LAPTOP5 (1-800-527-8675)

Web Site : www.panasonic.com/toughbook

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

For Canada

PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY

Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the ﬁrst end user customer, this computer product (excluding software

media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under

normal use, subject to the terms set forth below, during the period of warranty coverage speciﬁed.

Scope of Coverage

Period of Coverage

Type of Failure Coverage

•

Laptop Computers (except Battery) and AC Adaptor

Three (3) Years from Date of

Defective Materials or Work-

manship

Factory/PCI installed options including Wireless WAN, GPS, Original End User Customer

Bluetooth, Finger print reader, Backlit keyboard, Memory Card Purchase

and Media Bay Drives (Floppy, CD/DVD)

•

Mobile Wireless Display

PDRC – LCD and Keyboard Assemblies

Port Replicator

•

Hand-held Computers

Battery

One (1) Year from Date of

Original End User Customer

Purchase

Defective Materials or Work-

manship

Battery charger

Auto Adaptor

External USB Drives

•

Stylus

Ninety (90) Days from Date of Defective Materials or Work-

Original End User Customer

Purchase

manship

•

All consumable items including protection ﬁlm, cleaning cloth, No Coverage

carry case, tether and harness

Remedy – In the event of a warranty claim, contact PCI’s representatives within the applicable warranty period, identifying the

nature of the defect claimed, at 1-800-668-8386 between 9:00 A.M. and 5:00 P.M., Eastern Time Zone, Mon. – Fri. (excluding

holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before

warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable

rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance

of the original period of warranty coverage.

No Coverage – This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure

of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, intro-

duction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God.

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CON-

TROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS^*2. PANASONIC WILL NOT BE RESPONSIBLE

FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems

when used during critical phases of ﬂight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Sys-

tems and 2 EFB Systems are deﬁned by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaﬂets)

No.36

IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE

Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original pur-

chase. No liability is assumed for loss or damage to the product while in transit, if you chose your own transportation carrier.

SOFTWARE MEDIA LIMITED WARRANTY

Coverage – PCI warrants to you, the ﬁrst end user customer, that the disk(s) or other media on which software program(s) is/are

supplied will be free from defects in materials and workmanship under normal use in Canada for a period of sixty (60) days from

date of receipt as evidenced by your purchase receipt for your Panasonic Computer product.

THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software.

Please refer to the software licensor’s written warranty (accompanying the copy of the software) for any software warranty claim.

Claim Procedure – In the event of a defect in material or workmanship in the media during the sixty (60) days warranty period, and

you return it, transportation costs prepaid, to Panasonic Canada Inc., Computer Products Marketing, 5770 Ambler Drive, Mississau-

ga, Ontario L4W 2T3, within the warranty period, together with a copy of your purchase receipt, and an explanation of the suspected

defect, PCI will replace in Canada the defective disk(s) or other media.

Remedy – PCI’s entire liability, and your only remedy for any breach of this software media warranty is limited to replacement of the

media only. It does not cover any other damages, including, but not limited to, loss of use or proﬁt loss, or special, indirect or conse-

quential damages, or other claims, whether or not of similar character.

No Coverage – This limited warranty does not apply if the disk(s) or other media has been used in other than a Panasonic product,

or in environmental conditions other than those speciﬁed by PCI or the manufacturer, or if subjected to misuse, neglect, mishan-

dling, modiﬁcation or attempted modiﬁcation of the program, or if damaged by accident or act of God. PCI is not responsible for

damage to or loss of any program, data or removable storage media.

GENERAL

NO OTHER WARRANTIES – PCI DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RE-

SPECT TO THE SOFTWARE, SOFTWARE MEDIA, COMPUTER PRODUCT, OPTIONS AND ACCESSORIES.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES – IN NO EVENT SHALL PCI BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF THE LIMITED WARRANTIES SET OUT IN THIS DOCUMENT,

OR FROM THE USE OF THE COMPUTER PRODUCT, INCLUDING, WITHOUT LIMITATION, LOSS OF DATA, BUSINESS, PROF-

IT OR GOODWILL.

IN ANY EVENT, PCI’S MAXIMUM LIABILITY FOR ANY BREACH SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID BY YOU

FOR THE COMPUTER PRODUCT.

NO ACTION, REGARDLESS OF ITS BASIS, MAY BE BEGUN AGAINST PCI MORE THAN TWO (2) YEARS AFTER THE CAUSE

OF ACTION AROSE.

Statutory Warranties – Some jurisdictions do not allow these limitations or exclusions, so they may not apply to you.

Download from Www.Somanuals.com. All Manuals Search And Download.

GARANTIE LIMITÉE

Pour le Canada

GARANTIE LIMITÉE – ORDINATEURS ET PÉRIPHÉRIQUES PANASONIC

Couverture – Panasonic Canada Inc. (« PCI ») garantit à l’acheteur original que ce produit informatique (à l’exclusion des supports des

logiciels) est, au moment de sa vente par PCI ou d’un revendeur agréé par PCI, exempt de défauts de pièces et de fabrication dans les

conditions normales d’utilisation, et ce, pendant la période de couverture de la garantie, sous réserve des modalités décrites ci-dessous.

Éléments couverts

Durée de couverture

Type de couverture

•

Ordinateurs blocs-notes (sauf batteries) et adaptateur secteur Trois (3) ans à partir de la

Défauts de pièces et de fabrica-

tion

Options installées en usine/par PCI incluant : WAN sans ﬁl,

GPS, Bluetooth, lecteur d’empreintes digitales, clavier ré-

troéclairé, carte mémoire et lecteurs (disquettes, CD/DVD)

Écran mobile sans ﬁl

date d’achat original.

•

Ensembles PDRC – ACL et clavier

Duplicateur de port

•

Ordinateurs de poche

Batterie

Chargeur de batterie

Adaptateur pour voiture

Périphériques USB

Un (1) an à partir de la date

d’achat original.

Défauts de pièces et de fabrica-

tion

•

Stylo pointeur standard ou pour numériseur graphique

Quatre-vingt-dix (90) jours à

Défauts de pièces et de fabrica-

partir de la date d’achat original. tion

•

Tous les articles consommables incluant les pellicules protectrices, Aucune couverture

chiffons de nettoyage, étuis de transport, longes et sangles

Recours – Pour obtenir des informations sur la marche à suivre dans le cas où une réclamation en vertu de la garantie deviendrait

nécessaire, communiquez par téléphone avec un représentant de PCI au 1-800-668-8386, entre 9h00 et 17h00 (heure de l’Est) du lundi

au vendredi (sauf les jours fériés), avant l’échéance de la garantie applicable, en prenant soin d’identiﬁer la nature de la défaillance.

Un reçu ou toute autre pièce justiﬁcative de la date d’achat original sera exigé avant toute réparation. Toute pièce défectueuse couverte

par la présente garantie limitée sera réparée ou remplacée par une pièce neuve ou remise à neuf. Le remplacement ou la réparation

sera fait conformément aux modalités de la présente garantie limitée pendant la durée restante de la période originale de la garantie.

Produits non couverts – La présente garantie limitée ne couvre pas les produits achetés à l’extérieur du Canada. Elle ne couvre

pas non plus les dommages, la défaillance ou les défauts attribuables à une manutention inadéquate, une mauvaise installation,

une utilisation anormale ou abusive, de la négligence, un accident, un déversement ou la pénétration d’un objet étranger, une modi-

ﬁcation, un cas fortuit ou une réparation effectuée par une personne non agréée par PCI.

CE PRODUIT N’EST PAS DESTINÉ À ÊTRE UTILISÉ, EN TOUT OU EN PARTIE, COMME SYSTÈME/ÉQUIPEMENT NUCLÉAIRE, SYS-

TÈME/ ÉQUIPEMENT DE CONTRÔLE DU TRAFFIC AÉRIEN OU SYSTÈME/ÉQUIPEMENT DE POSTE DE PILOTAGE D’AVION^*3. PANA-

SONIC DÉCLINE TOUTE RESPONSABILITÉ CONCERNANT L’UTILISATION DE CE PRODUIT DANS LES CAS SUSMENTIONNÉS.

Les SYSTÈMES/ÉQUIPEMENTS DE POSTE DE PILOTAGE D’AVION sont dotés de systèmes OEPP (organiseur électronique

de poste de pilotage) de classe 2 et de classe 1 utilisés pendant des phases critiques de vol (par exemple, pendant le décollage

et l’atterrissage) et(ou) montés sur l’avion. Les systèmes OEPP de classe 1 et de classe 2 sont déﬁnis par le circulaire d’infor-

mation FAA: AC (Advisory Circular) 120-76A ou le feuilet n° 36 JAA: JAA TGL (Temporary Guidance Leaﬂets) No 36.

EXPÉDITION DU PRODUIT POUR SERVICE SOUS GARANTIE

Emballez soigneusement le produit, de préférence dans son emballage d’origine. Joignez une description de la défaillance de

même qu’une pièce justiﬁcative de la date d’achat. Panasonic Canada Inc. ne peut être tenue responsable pour tout dommage ou

perte subi pendant le transport si vous avez choisi le transporteur.

GARANTIE LIMITÉE – SUPPORTS DES LOGICIELS

Couverture – Panasonic Canada Inc. (« PCI ») garantit à l’acheteur original que la ou les disquettes ou tout autre support sur

lequel le ou les programmes sont fournis sont exempts de défauts de pièces et de fabrication dans des conditions normales d’utili-

sation au Canada, et ce, pour une période de soixante (60) jours suivant la date de réception indiquée sur la preuve d’achat.

LA PRÉSENTE GARANTIE EST LA SEULE OFFERTE PAR PCI COUVRANT LES SUPPORTS DE LOGICIELS. PCI ne garantit

pas les logiciels. Reportez-vous à la garantie écrite du concédant de licence d’utilisation du logiciel (qui accompagne la copie du

logiciel) pour toute réclamation en vertu de la garantie.

Réclamation – marche à suivre – Panasonic Canada Inc. remplacera toute disquette ou support défectueux si l’article en question est

retourné, port payé, à son service de Marketing – produits informatiques, 5770 Ambler Drive, Mississauga (Ontario) L4W 2T3, dans les soix-

ante (60) jours suivant la date d’achat original. Joignez à votre envoi une pièce justiﬁcative de votre achat et une description du problème.

Recours – La responsabilité de PCI - et votre seul recours - dans le cas de toute défaillance couverte par la garantie sur ce support de

logiciel est limitée au seul remplacement du support. Elle ne couvre aucun autre dommage, y compris, mais non exclusivement, la perte

d’usage ou de proﬁts, ni aucun dommage spécial, indirect ou consécutif, ni aucune autre réclamation de nature similaire ou autre.

Produits non couverts – La présente garantie limitée ne s’applique pas si la ou les disquettes ou autre support ont été utilisés dans un

produit d’une marque autre que Panasonic ou dans des conditions environnementales autres que celles spéciﬁées par PCI ou le fabricant,

ou soumis à une mauvaise utilisation, à la négligence, à une manutention inadéquate ou encore si le programme a été modiﬁé ou subi une

tentative de modiﬁcation ou des dommages attribuables à un accident ou à un cas fortuit. De plus, PCI n’assume aucune responsabilité

pour toute perte de, ou tout dommage à, un programme, des données ou un support de sauvegarde amovible.

GÉNÉRALITÉS

PCI NE RECONNAÎT AUCUNE AUTRE GARANTIE, EXPLICITE OU IMPLICITE, Y COMPRIS, MAIS NON EXCLUSIVEMENT, LES

GARANTIES IMPLICITES DE VALEUR COMMERCIALE ET D’UTILITÉ À UNE FIN QUELCONQUE, À L’ÉGARD DU LOGICIEL,

SUPPORTS DE LOGICIELS, PRODUITS INFORMATIQUES, PÉRIPHÉRIQUES ET ACCESSOIRES.

SOUS AUCUNE CIRCONSTANCE PCI NE POURRA ÊTRE TENUE RESPONSABLE DES DOMMAGES SPÉCIAUX, INDIRECTS

OU CONSÉCUTIFS ATTRIBUABLES À UN MANQUEMENT AUX GARANTIES LIMITÉES DÉCRITES DANS LE PRÉSENT DOCU-

MENT OU À L’UTILISATION DU PRODUIT INFORMATIQUE, Y COMPRIS, SANS RESTRICTION, LA PERTE DE DONNÉES,

D’AFFAIRES, D’ACHALANDAGE OU DE PROFIT.

DANS TOUS LES CAS, LA RESPONSABILITÉ MAXIMALE DE PCI POUR TOUT MANQUEMENT NE POURRA EXCÉDER LE

PRIX DE VENTE DU PRODUIT INFORMATIQUE.

AUCUNE RÉCLAMATION, SANS ÉGARD À SES MOTIFS, NE POURRA ÊTRE FAITE AUPRÈS DE PCI PLUS DE DEUX (2) ANS

APRÈS LES FAITS INVOQUÉS À LA BASE D’UNE TELLE RÉCLAMATION.

Garantie statutaires – Certaines juridictions interdisent de telles limitations ou exclusions; aussi, pourraient-elles ne pas s’appliquer

Download from Www.Somanuals.com. All Manuals Search And Download.

As an NERGY TAR^®Partner, Panasonic Corporation has determined that this

product meets the NERGY TAR^®guidelines for energy efﬁciency. By enabling

available power management settings, Panasonic computers enter a low-power sleep

mode after a period of inactivity, saving the user energy. To learn more about power

management, please visit the web site:

www.energystar.gov/index.cfm?c=power_mgt.pr_power_management

Outline of the International NERGY TAR^®Ofﬁce Equipment Program

The international NERGY TAR^®Ofﬁce Equipment Program is an international program that promotes energy

saving through the use of computers and other ofﬁce equipment. The program backs the development and dis-

semination of products with functions that effectively reduce energy consumption. It is an open system in which

business proprietors can participate voluntarily. The targeted products are ofﬁce equipment such as computers,

displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.

For information about NERGY TAR^®, refer to the following web site:

Web Site: www.energystar.gov

22-M-1

Panasonic Solutions Company

3 Panasonic Way, Panazip 2F-5,

Secaucus, NJ 07094

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga,

Ontario L4W 2T3

HS0210-1030

DFQW5375ZB

Printed in Japan

Download from Www.Somanuals.com. All Manuals Search And Download.

Minolta Fire Pit RAVL42 User Manual
NEC Projector MT1060 User Manual
NeumannBerlin Power Supply N 149 A User Manual
Nortel Networks Telephone X 6000 User Manual
NuTone Ventilation Hood 695 User Manual
One for All Universal Remote 704918 User Manual
Oricom Cordless Telephone ECO80 User Manual
Palsonic DVD Recorder DVDR313 User Manual
Panasonic Scanner KV S6040W User Manual
Panasonic Stereo System SC AK340 User Manual