This product complies with RoHS Directive (EU 2002/95/EC).
Zener Diodes
MAZ8xxxG Series
Silicon planar type
For stabilization of power supply
Features
Package
Extremely low noise voltage caused from the diode (2.4 V to
39V, 1/3 to 1/10 of our conventional MAZ3xxx series)
Extremely good rising performance (in the low-current range)
Easy-to-select the optimum diode because of their finely divided
zener-voltage ranks
Code
SMini2-F3
Pin Name
1: Anode
2: Cathode
Guaranteed reliability, equivalent to that of conventional products
(Mini type package)
Marking symbol
Allowing to reduce the mounting area, thickness and weight
substantially, compared with those of the conventional products
Allowing both reflow and flow mode of automatic soldering
Allowing automatic mounting by an existing chip mounter
Refer to the list of the electrical
characteristics within part numbers
Absolute Maximum Ratings Ta = 25°C
Parameter
Repetitive peak forward current
Power dissipation *
Symbol
IFRM
PD
Rating
200
Unit
mA
mW
°C
150
Junction temperature
Tj
150
Storage temperature
T
stg
–55 to +150
°C
Note) : PD = 150 mW achieved with a printed circuit board.
*
Common Electrical Characteristics Ta = 25°C±3°C
Parameter
Symbol
VF
Conditions
Min
Typ
Max
Unit
V
Forward voltage
IF = 10 mA
0.9
1.0
1
Zener voltage *
VZ
IZ
Specified value
Specified value
Specified value
Specified value
Specified value
V
Zener rise operating resistance
Zener operating resistance
Reverse current
RZK
RZ
IZ
W
Refer to the list of the
IZ
electrical characteristics
within part numbers
W
IR
VR
IZ
mA
mV/°C
2
Temperature coefficient of zener voltage *
SZ
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 5 MHz.
3. The temperature must be controlled 25°C for VZ mesurement.
VZ value measured at other temperature must be adjusted to VZ (25°C)
4. 1: V guaranted 20 ms after current flow.
*
Z
2: T = 25°C to 150°C
*
j
Publication date: July 2008
SKE00032BED
1
Download from Www.Somanuals.com. All Manuals Search And Download.
This product complies with RoHS Directive (EU 2002/95/EC).
MAZ8xxxG Series
Electrical Characteristics within Part Numbers (Continued) Ta = 25°C±3°C
Temperature
Zener
operating
resistance
RZ (W)
Zener rise
operating
resistance
Reverse
current
IR ( mA)
coefficient of
zener voltage
SZ (mV/°C)
Zener voltage
VZ (V)
Part number
Marking symbol
RZK (W)
IZ
VR
IZ
IZ
IZ
Min
Typ Max
Max
Max
Max
Typ
(mA)
(V)
(mA)
(mA)
(mA)
MAZ8075G0L
MAZ8075GLL
MAZ8075GML
MAZ8075GHL
MAZ8082G0L
MAZ8082GLL
MAZ8082GML
MAZ8082GHL
MAZ8091G0L
MAZ8091GLL
MAZ8091GML
MAZ8091GHL
MAZ8100G0L
MAZ8100GLL
MAZ8100GML
MAZ8100GHL
MAZ8110G0L
MAZ8110GLL
MAZ8110GML
MAZ8110GHL
MAZ8120G0L
MAZ8120GLL
MAZ8120GML
MAZ8120GHL
MAZ8130G0L
MAZ8130GLL
MAZ8130GML
MAZ8130GHL
MAZ8140GML
MAZ8150G0L
MAZ8150GLL
MAZ8150GML
MAZ8150GHL
MAZ8160G0L
MAZ8160GLL
MAZ8160GML
MAZ8160GHL
MAZ8180G0L
MAZ8180GLL
MAZ8180GML
MAZ8180GHL
7.00 7.50 7.90
7.07 7.30 7.43
7.29 7.50 7.67
7.51 7.70 7.89
7.70 8.20 8.70
7.77 7.90 8.17
8.03 8.20 8.43
8.29 8.50 8.70
8.50 9.10 9.60
8.58 8.80 9.02
8.87 9.10 9.33
9.14 9.40 9.60
9.40 10.00 10.60
9.44 9.70 9.92
9.75 10.00 10.25
10.07 10.30 10.59
10.40 11.00 11.60
10.40 10.70 10.94
10.73 11.00 11.28
11.05 11.30 11.60
11.40 12.00 12.70
11.40 11.70 11.96
11.73 12.00 12.33
12.06 12.30 12.68
12.40 13.00 14.10
12.40 12.70 12.99
12.73 13.00 13.40
13.25 13.70 14.08
13.65 14.00 14.35
13.90 15.00 15.60
13.90 14.30 14.76
14.60 15.00 15.35
14.95 15.30 15.60
15.30 16.00 17.10
15.30 15.70 16.09
15.70 16.00 16.50
16.26 16.70 17.10
16.90 18.00 19.10
16.90 17.30 17.76
17.55 18.00 18.45
18.20 18.70 19.10
7_5, 7-5 or 7^5
7_5
5
5
5
5
5
5
0.1
5.0
20
5
60
0.5
0.5
0.5
0.5
0.5
0.5
4.0
5
7-5
7^5
8_2, 8-2 or 8^2
8_2
0.1
0.1
5.0
6.0
7.0
8.0
9.0
20
20
30
30
30
5
5
5
5
5
60
60
60
60
80
4.6
5.5
6.4
7.4
8.4
5
5
5
5
5
8-2
8^2
9_1, 9-1 or 9^1
9_1
9-1
9^1
10_, 10- or 10^
10_
0.05
0.05
0.05
10-
10^
11_, 11- or 11^
11_
11-
11^
12_, 12- or 12^
12_
12-
12^
13_, 13- or 13^
13_
5
5
5
0.05 10.0
0.05 10.0
0.05 11.0
35
40
40
5
5
5
80
80
80
0.5
0.5
0.5
9.4
5
5
5
13-
13^
10.0
11.4
14-
15_, 15- or 15^
15_
15-
15^
16_, 16- or 16^
16_
5
5
0.05 12.0
0.05 13.0
50
60
5
5
80
80
0.5
0.5
12.4
14.4
5
5
16-
16^
18_, 18- or 18^
18_
18-
18^
SKE00032BED
3
Download from Www.Somanuals.com. All Manuals Search And Download.
This product complies with RoHS Directive (EU 2002/95/EC).
MAZ8xxxG Series
Electrical Characteristics within Part Numbers (Continued) Ta = 25°C±3°C
Temperature
coefficient of
zener voltage
SZ (mV/°C)
Zener
operating
resistance
RZ (W)
Zener rise
Reverse
current
IR ( mA)
Zener voltage
VZ (V)
operating
resistance
Part number
Marking symbol
RZK (W)
IZ
VR
(V)
IZ
IZ
IZ
Min
Typ Max
Max
Max
Max
Typ
(mA)
(mA)
(mA)
(mA)
MAZ8200G0L
MAZ8200GLL
MAZ8200GML
MAZ8200GHL
MAZ8220G0L
MAZ8220GLL
MAZ8220GML
MAZ8220GHL
MAZ8240G0L
MAZ8240GLL
MAZ8240GML
MAZ8240GHL
MAZ8270G0L
MAZ8270GLL
MAZ8270GML
MAZ8270GHL
MAZ8300G0L
MAZ8300GLL
MAZ8300GML
MAZ8300GHL
MAZ8330G0L
MAZ8330GLL
MAZ8330GML
MAZ8330GHL
MAZ8360G0L
MAZ8360GLL
MAZ8360GML
MAZ8360GHL
MAZ8390G0L
MAZ8390GLL
MAZ8390GML
MAZ8390GHL
18.80 20.00 21.20
18.85 19.30 19.81
19.50 20.00 20.50
20.15 20.70 21.19
20.80 22.00 23.30
20.80 21.30 21.86
21.45 22.00 22.55
22.10 22.70 23.24
22.80 24.00 25.60
22.80 23.30 23.97
23.50 24.00 24.70
24.35 25.00 25.60
25.10 27.00 28.90
25.30 26.00 26.70
26.30 27.00 27.70
27.30 28.00 28.70
28.00 30.00 32.00
28.30 29.00 29.70
29.30 30.00 30.80
30.20 31.00 31.80
31.00 3300 35.00
31.20 32.00 32.80
32.20 33.00 33.80
33.20 34.00 34.90
34.00 36.00 38.00
34.10 35.00 35.90
35.10 36.00 36.90
36.10 37.00 37.90
37.00 39.00 41.00
37.10 38.00 39.00
38.00 39.00 40.00
39.00 40.00 41.00
20_, 20- or 20^
20_
5
5
5
2
2
2
2
2
0.05 15.0
0.05 17.0
0.05 19.0
0.05 21.0
0.05 23.0
0.05 25.0
0.05 27.0
0.05 30.0
80
5
100
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
16.4
5
20-
20^
22_, 22- or 22^
22_
80
5
5
2
2
2
2
2
100
120
120
160
200
250
300
18.4
20.4
23.4
26.6
29.7
33.0
35.6
5
5
2
2
2
2
2
22-
22^
24_, 24- or 24^
24_
100
120
160
200
250
300
24-
24^
27_, 27- or 27^
27_
27-
27^
30_, 30- or 30^
30_
30-
30^
33_, 33- or 33^
33_
33-
33^
36_, 36- or 36^
36_
36-
36^
39_, 39- or 39^
39_
39-
39^
4
SKE00032BED
Download from Www.Somanuals.com. All Manuals Search And Download.
This product complies with RoHS Directive (EU 2002/95/EC).
MAZ8xxxG Series
PD T
IZ VZ
IZ VZ
a
250
200
150
100
50
102
10
102
10
T
a = 25°C
Ta = 25°C
Heat sink
Static
Static
Copper foil
Charac-
teristics
Charac-
teristics
0.8 mm × 0.8 mm
1
1
10−1
10−2
10−3
10−1
10−2
10−3
0
0
40
80
120
160
200
0
2
4
6
8
10
12
0
10
20
30
40
50
60
(
)
(
)
(
)
V
Ambient temperature Ta °C
Zener voltage VZ
V
Zener voltage VZ
IZ VZ
IZ VZ
RZ IZ
102
10
102
10
103
102
10
1
Ta = 25°C
Tj = 25°C
Dynamic
Charac-
teristics
Tj = 25°C
Dynamic
Charac-
teristics
MAZ8024G
MAZ8390G
1
1
MAZ8160G
MAZ8043G
MAZ8068G
10−1
10−2
10−3
10−1
10−2
10−3
MAZ8082G
MAZ8100G
MAZ8062G
MAZ8056G
MAZ8051G
MAZ8039G
MAZ8047G
10−1
1
10
102
103
0
2
4
6
8
10
12
0
10
20
30
40
50
60
(
)
(
)
V
Zener voltage VZ
V
Zener voltage VZ
(
)
Zener current IZ mA
IF VF
SZ IZ
102
10
25
20
15
10
5
Ta = 25°C
MAZ8240G
MAZ8160G
1
MAZ8100G
MAZ8068G
10−1
10−2
MAZ8039G
MAZ8024G
0
−5
0
0.2
0.4
0.6
0.8
1.0
)
1.2
0
10
20
30
40
50
(
(
)
Forward voltage VF
V
Zener current IZ mA
SKE00032BED
5
Download from Www.Somanuals.com. All Manuals Search And Download.
This product complies with RoHS Directive (EU 2002/95/EC).
MAZ8xxxG Series
PZSM tW
Zth tW
102
10
10
1
Ta = 25°C
PZSM
Heat sink
Copper foil 0.8 mm × 0.8 mm
tW
Non repetitive
Without heat sink (Typ. value)
With head sink (Typ. value)
MAZ8075G
MAZ8039G
10−1
10−2
1
10−1
10−2
10−1
1
10
102
10−2
10−1
1
10
102
(
)
Pulse width tW ms
( )
s
Pulse width tW
6
SKE00032BED
Download from Www.Somanuals.com. All Manuals Search And Download.
This product complies with RoHS Directive (EU 2002/95/EC).
MAZ8xxxG Series
SMini2-F3
Unit: mm
1.25 0.10
0.13 +−00..0025
0.50 0.05
2
0 to 0.05
1
0.35 0.05
5°
SKE00032BED
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|