720P Multi-purpose
Digital Camera
Model
AK-HC900P
Before attempting to connect, operate or adjust this product,
please read these instructions completely and save this manual for future use.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
For Your Safety ................................ 2
Preface ............................................. 4
Features ........................................... 4
Precautions ...................................... 5
Major Operating Controls and
Setting of Menu Items .............. 18–29
_Configuration of menu display
screen ...................................... 18
_USER menu (Initial screen) ..... 19
!Maintenance menu ............ 20–25
1Black shading correction
Their Functions ......................... 6, 7
menu .................................... 20
2Pedestal, gamma, flare
adjustment menu .................. 21
3Knee&white clip
How to Install.................................... 8
_How to set the lens .................... 8
_How to install on the camera
housing, pan/tilt head,
tripod, etc. .................................. 8
How to Set Up the System
(Connection) ................................. 9
Multi-purpose Digital Camera
Control System Configuration 1 ...... 10
Multi-purpose Digital Camera
Pan/Tilt Head Compatible
System Configuration 1...................11
Multi-purpose Digital Camera
Control System Configuration 2 ...... 12
Multi-purpose Digital Camera
Pan/Tilt Head Compatible
adjustment menu .................. 22
4Gain adjustment menu ......... 23
5Detail adjustment menu........ 23
6Master gain, auto iris setting
menu .................................... 24
7Super gain, Detail, Pedestal-
offset level setting menu....... 25
8Setting menu in frame
mode .................................... 25
9Color correction 1 ................. 26
qZColor correction 2 ................. 26
@Setting menu ..................... 27, 28
1Camera mode setting
System Configuration 2.................. 13
menu .................................... 27
2Electronic shutter setting
Operation Procedure...................... 14
menu .................................... 28
3Horizontal phase adjustment
menu for external reference
signal .................................... 28
#Camera ID setting menu.......... 29
$File managing and renewing
menu.................................. 29, 30
-File operation menu........ 29, 30
How to Adjust ........................... 15–17
_Flange back adjustment
(for zoom lens)......................... 15
_Lens iris gain volume
adjustment ............................... 15
_White balance adjustment ....... 16
_Color temperature and
white balance adjustment
(reference) ............................... 16
_Black balance adjustment........ 17
_Gen lock adjustment ................ 17
Outside Dimension Diagram .......... 31
Specifications & Accessories ......... 32
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you very much for purchasing the multi-purpose digital
camera.
Preface
This camera employs new 2/3q 1 million-pixel IT CCD [1280(H)k720(V)], realizing a com-
pact light-weight system including the optical system.
Also, the newly developed CCD having an IT configuration suited for higher picture quality
and the development of low-noise, high-speed amplifiers have enabled the realization of
high sensitivity, high S/N ratio, and wide dynamic range.
With the newly developed digital signal processing LSI mounted on the camera head, it
performs signal processing such as GAMMA, KNEE and DTL matrix, and CCD flaw correc-
tion based on a new system, intending to improve the maneuverability with multi-function,
high-quality, and high stability peculiar to a digital system.
Making the best use of the features of a small-sized self-contain camera, it is accommo-
dated in the camera housing and able to provide high-quality HD pictures as an multi-pur-
pose digital camera.
Features
New 2/3q 1 million-pixel CCD is employed.
[1280(H) k720(V)]
Performance improvement by new-gen-
eration IT
≥ 1 million-pixel CCD is 2/3q in size, being
compact and light-weight.
≥ High sensitivity, wide dynamic range and
low smear are realized by CCD most
suited for high-quality pictures.
The camera section is equipped with a
high picture quality digital signal pro-
cessing LSI.
≥ High response and high resolution are re-
alized by driving H-CCD at 74 MHz.
≥ 10 Bit, 74 MHz high picture quality digital
processing after the process circuit.
≥ New type CCD flaw correcting function.
≥ High reliability, multi-function, and im-
provement of maneuverability are real-
ized.
≥ Max. +62 dB gain-up is possible.
(Memory addition, CCD pixel addition
mode included)
Multiple functions
≥ Multi-function DTL such as high-lumi-
nance DTL and skin DTL.
≥ Two HD-SDI output lines.
≥ Capable of coping with various variable
frames including 24P (option).
≥ Right and left, top and bottom picture re-
versing function.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
DON’TS
DO’S
≥ Do not attempt to disassemble the cam-
era or other units. In order to prevent elec-
tric shock, do not remove screws or cov-
ers. There are no user-serviceable parts
inside.
≥ Refer any servicing to qualified service
personnel.
≥ Handle the camera with care.
≥ Protect the precision made lens by plac-
ing the lens cap over when the camera is
not in use. If the lens is not installed, pro-
tect the surface of the prism by placing
the body cap into the lens mount hole.
≥ Do not abuse the camera. Avoid striking,
shaking, etc. The camera contains sensi-
tive components which could be damaged
by improper handling or storage.
≥ Use a mild blower or lens cleaning tissue
designed for coated lenses, to clean the
surface of the lens or prism in the event
that it should become dirty.
≥ Do not let the lens remain uncapped when
the camera is not use. If the lens is not
installed, do not leave the lens mount hole
uncovered.
≥ Use a dry cloth to clean the camera if it is
dirty. In case the dirt is hard to remove,
use mild detergent and wipe gently.
≥ Do not touch the surface of the lens or
prism.
≥ Do not use strong of abrasive detergents
when cleaning the camera body.
≥ Use caution when operating the camera
in the vicinity of spot lights or bright lights,
as well as light reflecting objects and sur-
faces.
≥ Do not aim the camera toward the sun,
no matter whether it is turned on or not.
≥ Do not expose the camera to rain or mois-
ture, and do not try to operate the equip-
ment in wet conditions. Do not operate the
camera if it becomes wet.
≥ Take immediate action if ever the camera
should become wet. Turn the power off
and have the unit checked by an autho-
rized service facility.
≥ Do not operate the camera outdoors dur-
≥ Follow normal safety precaution to avoid
ing a lightning storm.
personal injury.
≥ Do not use the camera in an extreme en-
vironment where high temperatures or
high humidity exist.
≥ Use the camera in an environment where
the temperature is within 32°F – +104°F
(0°C – +40°C), and the relative humidity
is within 30% – 90% (no condensation).
≥ Do not leave the camera turned on when
not in use. Do not unnecessarily turn the
camera power on and off repeatedly. Do
not block the ventilation slots.
≥ Always turn the power off when the cam-
era is not going to be used. Operate the
camera only when there is adequate ven-
tilation.
≥ Do not cover the port otherwise block ven-
tilation during operation. Internal heat
buildup can cause a fire.
≥ Cooling fan
There is internally provided a cooling fan.
Since the cooling fan is a consumable part,
replace it after about 50,000 hours of op-
eration.
(Be sure to ask the dealer for the replace-
ment.)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Major Operating Controls and Their Functions
_ Front Panel
3
4
1
2
1 Lens Mount
2/3q standard bayonet type (B4 mount) lens is installed.
2 Lens Fixing Ring Knob
Lens is fixed by turning the knob counterclockwise.
3 Cable Clamp
Used to clamp the lens cable.
4 Lens Connector [LENS]
Used to connect the camera cables of the lens.
Pin No.
Signal
Return control
VTR-S/S
Pin No.
Signal
Iris follow
9
1
1
2
3
4
5
6
7
8
2
8
10
5
Iris auto selection
3
7
11
12
4
6
UNREG GND
Iris manual selection
Iris control
9
––––
––––
––––
NC
10
11
12
UNREG 12V
_ Top and Bottom Panels
5
6
7
6
5 Cooling Fan
≥ Do not block or obstruct the ventilation during operation. It may otherwise cause inter-
nal heating or fire.
≥ The life of this fan is approximately 50,000 hours (at room temp. 25eC). Replace the
fan as needed.
(When the room temperature is higher than 35eC, replace the fan earlier.)
Be sure to ask the dealer for the replacement.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Major Operating Controls and Their Functions
6 Camera mounting hole (1/4-20UNC)
7 Camera mounting hole (3/8-16UNC)
The screw holes can be used to secure the camera for installing it on camera housing,
and when using a pan/tilt head or a tripod.
_ Side Panel
B
R
E
A
K
E
/
R
8
9
Z
F
O
O
O
C
M
S
U
1
2
S
D
I
O
U
T
:
;
1
/
F
8 Breaker [BREAKER]
If the breaker is operated due to over-current or the like, check the cause and eliminate
the trouble, then press the breaker button.
9 Zoom/Focus Connector [ZOOM/FOCUS]
Used to connect the zoom/focus control cables of lens.
Pin No.
Signal
Focus control selection
Zoom control selection
GND
Pin No.
Signal
9
1
1
2
3
4
5
6
7
8
COM
2
8
10
5
Focus control
3
7
11
12
4
6
9
Zoom control
Forcible iris closing
Iris control
10
11
12
Iris control selection
COM iVoltage
COM jVoltage
iVoltage
: SDI Output Connectors [SDI OUT 1, 2]
SDI signal output is given by two lines.
; Interface Connector [I/F]
Pin No.
Signal
Pin No.
Signal
Y signal GND
Pb siganl GND
Pr signal GND
Sync signal GND
DC GND
1
2
3
4
5
6
7
Y signal output
Pb signal output
Pr signal output
Sync signal input
DC 12V
8
9
15
14
13
12
11
10
7
6
10
11
12
13
14
15
5
4
3
2
1
Frame GND
TXD (C)
9
8
TXD (H)
RXD (H)
RXD (C)
TXD: Data from Camera to remote controller
RXD: Data from remote controller to camera
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Be sure to ask the dealer for the installation,
adjustment and connection of this equipment.
How to Install
_ How to set the lens
≥ Standard 2/3q bayonet type (B4 mount) lens of any makers can be used*.
1 Turn the lens fixing ring knob counterclockwise to remove the lens mount cap.
2 Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the
lens.
3 Connect the lens cable to the lens connector.
4 Connect the remote (zoom/focus control) cable to the zoom/focus connector on the
rear panel.
* Note that there are some lenses uncontrollable with respect to zoom, focus function.
B
R
E
A
K
E
/
R
Remote (zoom/focus control) Cable
(When a pan/tilt head is used, connect
the cable to the pan/tilt head.)
Z
F
O
O
O
C
M
S
U
1
2
S
D
I
O
U
T
Camera Cable
(To Lens Connector)
Lens Fixing Ring Knob
_ How to install on the camera housing, pan/tilt head, tripod,
etc.
1 Precisely set the camera on the camera housing, pan/tilt head, tripod, etc. by using
the camera set-screw hole (1/4-20UNC, 3/8-16UNC).
2 When mounting the camera on a pan/tilt head, be sure to use proper tools and make
sure that there is no fear of falling off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Up the System (Connection)
_ Connection of remote control box
≥ Use multi-cable for the connection of HD controller AK-HRP900 and this unit.
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
Coaxial Cable
(5C-FB)
HD-SDI
1
2
S
D
I
O
U
T
D-sub 15-pin
HD Monitor
1
/
F
AK-HC900P
Video
Input
Signal
Multi-cable (5m)
AK-HDMLTCA05
HD Monitor
YPbPr
O
I
AC Adaptor
AW-PS505
External
sync
signal
(3 value
sync)
NOTE
Note that the monitor output is
attenuated and deteriorated if
the cable is too long.
DC Power
Cable
D-sub 15-pin
HD Controller
AK-HRP900*1
1 Before connecting the cables, be sure to set the Power Switch of AC Adaptor and HD
Controller to OFF.
2 Connect the multi-cable to the interface connector of the camera, and the opposite side to
HD Controller.
3 Set the AC Adaptor Power Switch to ON, and the HD Controller Power Switch to ON, then
the camera can be controlled.
4 After shooting, set the HD Controller Power Switch to OFF, and the AC Adaptor Power
Switch to OFF.
*1 To be sold in September 2002
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-purpose Digital Camera Control System Configuration 1
Remote (zoom/focus
control) cable
B
R
E
A
K
E
R
Z
F
O
O
O
M
/
C
U
S
HD-SDI
Coaxial Cable (5C-FB)
2
S
D
I
O
U
T
1
/
F
D-sub 15-pin
Remote
controllable
lens
Multi-purpose
Digital Camera
AK-HC900P
Multi-cable (5m)
AK-HDMLTCA05
HD Monitor
O
I
AC Adaptor
AW-PS505
External sync signal
(3 value sync)
DC
Power
Cable
D-sub 15-pin
HD Controller
AK-HRP900*1
*1 To be sold in September 2002
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-purpose Digital Camera Pan/Tilt Head Compatible
System Configuration 1
Remote
controllable
lens
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
HD-SDI
Coaxial Cable (5C-FB)
2
S
D
I
O
U
T
1
/
F
Multi-cable (5m)
AK-HDMLTCA05
Multi-purpose Digital
Camera AK-HC900P
Remote
(zoom/focus
control) cable
O
I
AC Adaptor
AW-PS300
N D / E X T
I N
S D I
L E N S E I / F
I / F
C A M E R A
DC Power
Cable
D
C
I
1
2
V
C
O
N
I
T
P
R
O
L
I
N
N
1394
/
RP
C
S
OP
HD Monitor
G/L
I
N
P
b
OUT
P
r
/
SDI
Y
/
VIDEO
OUT
OUT
O
I
Pan/Tilt Head
AW-PH300A
AC Adaptor
AW-PS505
External sync signal
(3 value sync)
NOTE:
Pan/Tilt Head is also com-
patible with AW-PH500/
PH600.
DC
Power
Cable
Pan/Tilt Head Controller
AW-RP301
HD Controller
AK-HRP900*1
AC Adaptor
AW-PS301
*1 To be sold in September 2002
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-purpose Digital Camera Control System Con-
figuration 2
(System for remotely monitoring picture control)
Remote (zoom/focus
control) cable
Multi-cable (5m)
AK-HDMLTCA05
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
HD-SDI Coaxial Cable (5C-FB)
2
S
D
I
O
U
T
Relay box
AK-HTF900*1
1
/
F
Multi-purpose
Digital Camera
AK-HC900P
Remote
controllable
lens
Transfer
DC Power
Cable
O
I
AC Adaptor
AW-PS505
Multi-cable (5m)
AK-HDMLTCA05
HD Monitor
O
I
AC Adaptor
AW-PS505
DC
Power
Cable
HD Controller
AK-HRP900*1
*1 To be sold in September 2002
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-purpose Digital Camera Pan/Tilt Head Compatible
System Configuration 2
(System for remotely monitoring picture control)
Multi-cable (5m)
AK-HDMLTCA05
Remote
controllable
lens
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
HD-SDI
Relay box
AK-HTF900*1
Coaxial Cable (5C-FB)
1
2
S
D
I
O
U
T
1
/
F
Multi-purpose Digital
Camera AK-HC900P
Remote
Transfer
(zoom/focus
control) cable
O
I
AC Adaptor
AW-PS505
N D / E X T
I N
S D I
Multi-cable (5m)
AK-HDMLTCA05
L E N S E I / F
I / F
C A M E R A
D
C
I
1
2
V
C
O
N
I
T
P
R
O
L
I
N
N
1394
/
RP
C
S
OP
DC Power
Cable
HD Monitor
G/L
I
N
P
b
OUT
P
r
/
SDI
Y
/
VIDEO
OUT
OUT
O
I
Pan/Tilt Head
AW-PH300A
O
I
AC Adaptor
AW-PS505
AC Adaptor
AW-PS300
NOTE:
Pan/Tilt Head is also com-
patible with AW-PH500/
PH600.
DC
Power
Cable
Pan/Tilt Head Controller
AW-RP301
HD Controller
AK-HRP900*1
AC Adaptor
AW-PS301
*1 To be sold in September 2002
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Procedure
1
2
Turn on the power of each equipment.
5
6
Adjust the black balance.
≥ This adjustment is needed when the
camera is used for the first time or af-
ter leaving unused for a long time.
≥ The adjustment is necessary when the
ambient temperature is greatly changed
or at the change of season.
≥ After adjusting the black balance once,
re-adjustment is not needed under the
same condition.
Properly adjust the light for the ob-
ject.
3
Adjust the flange back of the lens, the
iris and the focus.
≥ Flange back must be adjusted when
the camera is used for the first time or
after replacement of the lens.
Start shooting.
(After shooting, be sure to turn off the
power of each equipment connected.)
4
Adjust the white balance.
≥ This adjustment is needed when the
camera is used for the first time or af-
ter leaving unused for a long time.
≥ The adjustment is necessary when the
lighting condition or brightness is changed.
≥ After adjusting the white balance once,
re-adjustment is not needed under the
same condition.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Adjust
_ Flange back adjustment (for zoom lens)
The adjustment is to adjust the focus in all the range from the maximum zoom to the
widest angle of the zoom lens.
1 Shoot a dark object to open the iris.
2 Adjust the distance from the object to 6.6 ft. (2 m) at least, then loosen the flange back
fixing knob of the lens.
3 Set the lens to the maximum zoom and adjust the focus by turning the focus ring.
4 Set the lens to the widest angle and adjust the focus by turning the flange back adjust
ring.
5 Repeat adjusting the focus ring and flange back adjust ring until the focus is adjusted
within the zooming range.
After finishing the adjustment, tighten the flange back fixing knob.
Focus Ring
Flange Back Fixing Knob
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
1
2
S
D
I
O
U
T
1
/
F
Flange Back Adjust Ring
_ Lens iris gain volume adjustment
≥ Iris gain adjust hole (G or S) is provided at front of the lens housing. Adjust the iris
according to the following procedure by using a screwdriver.
1 Set the iris select switch of the lens to A “AUTO” side.
2 Turn the iris gain adjust volume to maximize the gain in such extent that no hunting
takes place.
* Iris PEAK/AVE of camera menu can also be used for the adjustment.
Iris Gain Adjust Volume
Auto Iris Power Zoom Lens
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Adjust
_ White balance adjustment
Adjust the white balance after shooting a white object by at least 50% of the screen.
NOTE: If the white signal level is over 100% or less than 50%, the white balance may not
be normally adjusted.
_ Color temperature and while balance adjustment (reference)
When carbon is burnt, it develops vari-
ous colors of light depending on the tem-
perature. Natural light can be specified
by color temperature reflecting to the
color developed when carbon is burnt.
The light of 3,200K (K=Kelvin, j273°C
equals to absolute zero temperature OK)
represents the same value (color) as
what develops when carbon is burnt at
3,200K (2,927°C). The relationship be-
tween the color temperature of the light
source and weather condition is indi-
cated in the right figure. Let’s study the
difference of shooting an indoor object
from shooting one outdoors. Studios are
usually lighted with incandescent lamps
and the color temperature of a white
object in a studio is around 3,200K. The
color temperature of a white object out-
doors is around 6,500K. The former may
look a little yellowish while the latter ap-
pears somewhat bluish when they are
shot by a camera. However, the human
eye does not recognize color differences
among these objects even under differ-
ent ambient lighting conditions, because
of their adaptability to light.
10000K
9000K
8000K
7000K
6000K
5000K
4000K
3000K
2000K
1000K
Blue sky
Cloudy
Rainy
AWC
Partly cloudy
Fine
Fluorescent lam
Tangsten lamp
Halogen lamp
Candle
Color temperature values
The video camera reproduces color differences with high fidelity and the color of an
object somewhat different from what appears to the human eye.
Therefore, there is a need to adjust the white balance in order to correct differences
between color temperatures.
NOTE
Color temperature outdoors may vary depending on weather conditions.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Adjust
_ Black balance adjustment
≥ Adjust it with the lens closed.
When the motor drive lens is controlled from the camera, adjusting the black balance
causes the lens to be automatically closed.
_ Gen lock adjustment
When multiple cameras are used or the camera is combined with other equipment, it is
necessary to adjust the phase for phase matching by external synchronization.
≥ Horizontal phase adjustment
Observe the waveforms of externally synchronizing signal input (black burst signal)
and video signal output by a two-phenomenon oscilloscope, and make the horizontal
phase according to the camera menu.
Adjustment with H.PHASE of
SETTING menu
1 Roughly adjust the synchronizing
signal input and video signal output
phases by H.PHASE-COARSE.
2 Finely adjust the synchronizing sig-
nal input and video signal output
phases by H.PHASE-FINE.
°°H.PHASE°°
H.PHASE-COARSE
H.PHASE-FINE
:03
:40
H.Phase adjustment is executed by
the HD Controller AK-HRP900.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
_ Configuration of menu display screen
USER MENU
Maintenance menu
1.MAINTENANCE
2.SETTING
3.CAM ID
MAINTENANCE
°
°
1.BLACK SHADING
2.PED,GAMMA,FLARE
3.KNEE,WHITE CLIP
4.R/B GAIN
4.FILE MENU
5.DTL
6.GAIN,AUTO IRIS
7.S.GAIN 1
8.S.GAIN 2
9.S.GAIN 3
10.FRAME MODE
11.COLOR CORRECTION1
12.COLOR CORRECTION2
USER MENU
Using condition setting menu
°°SETTING°°
1.MODE
2.SHUTTER
3.H.PHASE
Camera ID setting menu
°°CAM ID°°
ID:AKHC900
File managing & renewing menu
H FILE MENU
°
°
FILE
:USER1
:PRESET)
:USER1
:
(DATA REF
SAVE FILE?
SAVE
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
_ USER menu (Initial screen)
USER MENU
The readout data at start of power supply is
the data just before cutting off the power
supply, and the operation is started with the
data.
1. MAINTENANCE
It sets various adjusting data.
2. SETTING
1.MAINTENANCE
2.SETTING
3.CAM ID
4.FILE MENU
It sets various modes.
3. CAM ID
It sets the camera ID.
4. FILE MENU
It executes file loading and saving, and
makes the basic setting of data display.
Menu operation is executed by the HD Controller AK-HRP900.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
! Maintenance menu
MAINTENANCE
≥ Move the cursor (arrow mark) to the item
to be adjusted and press the MENU key,
then it enters the adjustment menu there-
under.
≥ Move the cursor to MAINTENANCE and
press the MENU key, then it returns to
USER MENU.
°
°
1.BLACK SHADING
2.PED,GAMMA,FLARE
3.KNEE,WHITE CLIP
4.R/B GAIN
5.DTL
6.GAIN,AUTO IRIS
7.S.GAIN 1
8.S.GAIN 2
9.S.GAIN 3
10.FRAME MODE
11.COLOR CORRECTION1
12.COLOR CORRECTION2
1 Black shading correction menu
≥ When MENU key is pressed at DE-
TECTION, (BLK-SHD:ACTIVE) ap-
pears, then the lens is automatically
stopped down and ABB operation is
executed.
BLACK SHADING
°
°
DETECTION
CORRECT(DIG)
:ON
≥ When CORRECT (DIG) is turned ON,
horizontal and vertical shading correc-
tion is automatically executed.
When it is turned OFF, the current value
is maintained.
≥ Move the cursor to “BLACK SHADING”
and press the MENU key, then it re-
turns to MAINTENANCE MENU.
Note:
It takes about 90 sec. until completion of
black shading correction.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
! Maintenance menu
°°PED,GAMMA,FLARE°°
M PED
R PED
B PED
M GAMMA
R GAMMA
B GAMMA
R FLARE
G FLARE
B FLARE
GAMMA
2 Pedestal, gamma, flare adjustment
menu
:+027
:+000
:+000
:0.45
:+00
:+00
:010
:000
:017
:ON
M PED: Master pedestal can be adjusted
only by turning the control panel VR.
The R, G, B pedestal can be totally ad-
justed.
R, B PED: R, B pedestal adjustment.
Besides the master pedestal adjustment,
R, B pedestal can be independently ad-
justed. It is not related to DATA REF. The
numeral display after normal ending of
ABB is “0” for both of R, B.
FLARE
:ON
M GAMMA: Master gamma adjustment.
The R, G, B gamma can be totally ad-
justed.
R, B GAMMA: R, B gamma adjustment.
Besides the master gamma adjustment,
R, B gamma can be independently ad-
justed.
R FLARE: R flare adjustment
G FLARE: G flare adjustment
B FLARE: B flare adjustment
GAMMA: Gamma ON/OFF setting
FLARE: Flare ON/OFF setting
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
! Maintenance menu
°°KNEE,WHITE CLIP°°
3 Knee&white clip adjustment menu
M KNEE POINT: Master knee point ad-
justment.
M KNEE POINT
R KNEE POINT
B KNEE POINT
M KNEE SLOPE
R KNEE SLOPE
B KNEE SLOPE
A.KNEE POINT
A.KNEE LVL
:95.00%
:+00.00%
:+00.00%
:95.00%
:+000
:+000
:95.00%
:108
G, B, R knee point can be totally adjusted.
R, B KNEE POINT: R, B knee point ad-
justment.
Besides the master knee point adjust-
ment, R, B knee point can be independ-
ently adjusted.
WHITE CLIP LVL
KNEE
WHITE CLIP
:109%
:MANU
:ON
M KNEE SLOPE: Master knee slope ad-
justment.
G, B, R knee slope can be totally ad-
justed.
R, B KNEE SLOPE: R, B knee slope ad-
justment.
Besides the master knee slope adjust-
ment, R, B knee slope can be indepen-
dently adjusted.
A. KNEE POINT: Auto knee point setting.
Knee point in auto knee mode is set.
A. KNEE LVL: Auto knee level.
WHITE CLIP LVL: White clip level ad-
justment.
Video level with white clipped is set.
KNEE: KNEE mode (OFF/MANU/AUTO)
OFF: Knee function is turned OFF
MANU: Knee function is adjustable with
menu.
AUTO: Auto knee function is executed.
WHITE CLIP: White clip operation set-
ting.
With it ON, white clip is effective.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
! Maintenance menu
°°R/B GAIN°°
4 Gain adjustment menu
The gain of R, B GAIN is adjusted.
The difference from the state of being
white-balanced can be adjusted.
≥ The numeral value displayed after nor-
mal ending of AWB is “0” for both of R,
B.
R GAIN
B GAIN
:+000
:+000
°°DTL°°
DTL
5 Detail adjustment menu
DTL: Setting of valid/invalid of detail func-
tion.
:ON
:+00
:11
:02
:2
:10
:ON
:10
:OFF
:+00
:+00
:0
TOTAL DTL LVL
H DTL LVL
CRISP
LVL DEPENDENT
PEEK FREQUENCY
KNEE APERTURE
KNEE APA.LVL
SLIM DTL
DTL(+)
DTL(-)
DTL CLIP
DTL SOURCE
TOTAL DTL LVL: Horizontal and verti-
cal detail level adjustment.
H DTL LVL: Horizontal DTL component
is adjusted independently of DTL ad-
justed by TOTAL DTL.
CRISP: It functions to eliminate slight
detail component and to reduce the noise
level.
:(B+G)/2
LVL DEPENDENT: It suppresses the de-
tail of low brightness level. The bright-
ness level to be suppressed is adjusted
here.
PEAK FREQUENCY: It lifts up the detail
component, and selects the central fre-
quency.
KNEE APERTURE: It functions to em-
phasizes the detail component of the por-
tion with knee applied.
KNEE APA.LVL: It sets the degree of
knee aperture.
SLIM DTL: It validates the function of
slimming the portion where the detail is
thick and emphasized.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
! Maintenance menu
°°DTL°°
DTL
5 Detail adjustment menu (continued
from previous page)
:ON
DTL (i): Setting of DTL at the edge in
positive direction.
DTL (j): Setting of DTL at the edge in
negative direction.
DTL CLIP: Setting of clip level of DTL
edge.
DTL SOURCE: Setting of video source
[G, R, (3G+R) /4, (2G+R+B) /4, (G+B/2)]
to create the detail.
TOTAL DTL LVL
H DTL LVL
CRISP
LVL DEPENDENT
PEEK FREQUENCY
KNEE APERTURE
KNEE APA.LVL
SLIM DTL
DTL(+)
DTL(-)
DTL CLIP
DTL SOURCE
:+00
:11
:02
:2
:10
:ON
:10
:OFF
:+00
:+00
:0
:(B+G)/2
°°GAIN,AUTO IRIS°°
LOW GAIN
MID GAIN
HIGH GAIN
A.IRIS LVL
A.IRIS PEAK/AVG
A.IRIS WINDOW
IRIS MODE
6 Master gain, auto iris setting menu
LOW GAIN: LOW setting of master gain.
MID GAIN: MID setting of master gain.
HIGH GAIN: HIGH setting of master gain.
≥ The above GAIN setting is able to set -
6 to + 18 dB in 3 dB step.
:0dB
:9dB
:18dB
:082
:075
:NORM1
:LENS
:06
A.IRIS LVL: Setting of the intended con-
vergence level of auto iris.
IRIS GAIN
A.IRIS PEAK/AVG: Setting of the detec-
tion ratio of peak value and average value
of the quantity of light when auto iris is
operated.
A.IRIS WINDOW: Setting of the detect-
ing position of auto iris.
IRIS MODE: Auto iris mode setting:
(LENS/CAM).
IRIS GAIN: Iris loop gain adjustment.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
! Maintenance menu
°°S GAIN 1°°
7 Super gain, Detail, Pedestal-offset
level setting menu
TOTAL GAIN
ANLG GAIN
:62dB
:36dB
:06dB
:OdB
:20dB
:00
:0
:5
:2
:0.45
:-043
:-046
:-045
°
TOTAL GAIN: Total gain in analog, pixel
addition, and memory addition is dis-
played.
PIX MIX
V MIX
FRAME MIX
H DTL LVL
ANLG GAIN: Gain setting in analog.
PIX MIX: Gain setting in horizontal pixel
addition. Capable of setting 0/6 dB.
V MIX: Gain setting in vertical pixel addi-
tion. Capable of setting 0/6 dB.
FRAME MIX: Gain setting in memory ad-
dition. Capable of setting 0/6/12/15/20
dB.
CRISP
LEVEL DEPENDENT
PEAK FREQUENCY
M GAMMA
MASTER PED OFFSET
R PED OFFSET
B PED OFFSET
(Super gain 1, 2, 3 are same menu.)
H DTL LVL: DTL level setting of super
gain.
CRISP: Setting the function of reducing
noise level of super gain. It is invalid
when DTL level is “0.”
LEVEL DEPENDENT: Setting of DTL
suppression at low lighting intensity of
super gain.
PEAK FREQUENCY: Setting of DTL
boost frequency of super gain.
M GAMMA: Gain setting in super gain.
Capable of setting 0/6 dB.
MASTER PED OFFSET: Setting of mas-
ter pedestal offset of super gain 1.
R PED OFFSET: Setting of R pedestal
offset of super gain.
B PED OFFSET: Setting of B pedestal
offset of super gain.
H FRAME MODE
8 Setting menu in frame mode
°
°
SCAN REVERSE: Capable of changing
the right and left pictures, the top and bot-
tom pictures with each other, respectively.
1.SCAN REVERSE
:OFF
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
! Maintenance menu
< COLOR CORRECTION1 >
9 Color correction 1 menu
Adjustment of gain (saturation) and phase
of each color.
SAT
+00
+00
+00
+00
+00
+00
PHASE
+00
+00
+00
+00
+00
+00
R
Mg
B
Cy
G
Y1
< COLOR CORRECTION2 >
qZ Color correction 2 menu
SAT
+00
+00
+00
+00
+00
+00
PHASE
+00
+00
+00
+00
+00
+00
Adjustment of gain and phase of matrix.
R - Mg
Mg - B
B - Cy
Cy - G
G - Y1
Y1 - R
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
@ Setting menu
°°SETTING°°
- Menu for various settings.
1.MODE
2.SHUTTER
3.H.PHASE
°°MODE°°
BLACK STRETCH
1 Camera mode setting menu
BLACK STRETCH: Setting of the func-
tion of expanding low-brightness analog
video level.
:OFF
:OFF
:YPbPr
:0m
:OFF
:BAR
:0
D5600K
ANLG OUTPUT SEL
CABLE COMPE
SUP GAIN
CAM ID
CAM ID POSI
COLOR CORRECTION
It is set by ON/OFF.
D5600K: It is able to make color tempera-
ture correction of about 5600 degrees of
electric color temperature correcting file.
It is set by ON/OFF.
:OFF
ANLG OUTPUT SEL: Video output
YPbPr/RGB is changed over. It is usu-
ally set to YPbPr.
CABLE COMPE: Setting of video cable
compensation. It is able to set 0/25/50m.
SUP GAIN: It sets OFF/1/2/3 of MAX
GAIN.
CAM ID: Setting of camera ID display.
It is set by OFF/BAR/ON.
In BAR setting, CAM ID is displayed only
in BAR mode.
CAM ID POSI: It sets the display posi-
tion of camera ID.
0: top left, 1: top right, 2: down left, 3:
down right.
COLOR CORRECTION: Setting of ma-
trix ON/OFF.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
@ Setting menu
°°SHUTTER°°
SHUTTER MODE
SHUTTER SPEED
SYNCHRO SCAN
2 Electronic shutter setting menu
SHUTTER MODE: It selects the shutter
operation. ON/SYNCHRO/OFF can be
selected.
:OFF
:1/100
:75.1
#
ON
Setting of normal discrete shutter
speed.
SYNCHRO
mode.
#
Setting of synchro scan
SHUTTER SPEED: Setting of normal
shutter speed.
SYNCHRO SCAN: Setting of synchro
scan mode.
Shutter speeds of 60 Hz to 120 Hz can
be continuously changed.
°°H.PHASE°°
H.PHASE-COARSE
3 Horizontal phase adjustment menu for
external reference signal
:09
:40
H.PHASE-COARSE: It is able to set the
horizontal phase in 15¨ step.
H.PHASE-FINE
H.PHASE-FINE: Setting of 1-step fine
adjustment in the above phase adjust-
ment.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
# Camera ID setting menu
°°CAM ID°°
ID:AKHC900
$ File managing and renewing menu
H FILE MENU
- File operation menu
°
°
: blinking display.
FILE
SAVE FILE?
SAVE
:USER1
:USER1
:
1 The file selected by FILE is loaded.
It can be selected from [PRESET/
USER1 / USER2 /CURRENT].
When desired to return to the previ-
ous data after loading other file, se-
lect “CURRENT.”
H FILE MENU
°
°
FILE
SAVE FILE?
SAVE
:USER1
:USER1
:
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting of Menu Items
$ File managing and renewing menu
H FILE MENU
- File operation menu (continued)
°
2 When saving the current data, two files
(USER1 /USER2) can be saved.
Select the file by “SAVE FILE?”
Select “USER1” and move the cursor
to SAVE and press the MENU key,
then the item menu is displayed.
3 SAVE IN USER1. OK?
FILE
SAVE FILE?
SAVE
:USER1
:USER1
:
“YES” and “NO” are displayed.
Move the cursor from “NO” to “YES”
and check that “YES” blinks.
4 When the menu key is pressed, “SAVE
COMPLETE” appears, then “SAVE” of
the file is completed.
FILE MENU
FILE
°
°
:USER1
:USER1
SAVE FIL?
SAVE IN USER1.OK?
YES
NO
FILE MENU
°
°
FILE
SAVE FIL?
:USER1
:USER1
SAVE IN USER1.OK?
SAVE COMPLETE
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Outside Dimension Diagram
(
): mm
B
R
E
A
K
E
/
R
Z
F
O
O
O
C
M
S
U
1
2
S
D
I
O
U
T
1
/
F
4-3/8q (110)
6-5/16q (160)
5/8q
(15)
13/16q
(20)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications & Accessories
_ Specifications
Supply voltage:
DC 12 V (supplied from D-SUB 15 pins)
Power consumption: 22 W
is the safety information.
Image pickup device:
System :
Resolving optical system:
Optical filter:
2/3q 1 million-pixel IT CCDk3
GBR image pickup system
F1.4 prism
CC: clear, 4300K, 6300K, cross
ND: 100%, 25%, 6.3%, 3.2%
Bayonet type
Lens mount:
Output spec.:
SMPTE 296M
Sensitivity:
Horozontal resolution:
S/N :
F10, 2000Ix, 3200K, white reflection rate 89.9%
More than 700 TV lines
#
54 dB (Y signal 30 MHz)
Horizontal frequency:
Vertical frequency:
44.955 Hz (750 lines/field)
59.94 Hz (progress)
Ambient temp. for operation: 0°C to i40°C
Ambient temp. for storage: j20°C to i60°C
Weight:
Approx. 4.07 lbs (1.85 kg)
Dimensions:
4-3/8q (W)k5-13/16q (H) k7-1/8q (L)
110k147k180 mm
Input/output signal
Video output:
SYNC input :
#
Y, PB, PR, each 75 ohm output (signal band
SYNC input (GL input 3 value SYNC)
30 MHz)
Camera connector:
Control system:
HD-SDI:
D-SUB 15-pin connector seat (JAE: DAU-15PF-FO)
Synchronous (RS422, 38.4Kbps)
BNC 2 system
Lens connector 1:
Lens connector 2:
Iris control (HIROSE: HR10A-10R 12SC)
Zoom, focus control (HIROSE: HR10A-10R12PC)
_ Accessories
≥ Lens cap (1)
≥ Instruction manual (1)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7000
EASTERN ZONE
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200
WESTERN ZONE:
3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500
Government Marketing Department:
52 West Gude Drive, Rockville, MD 20850 (301) 738-3840
Broadcast PARTS INFORMATION & ORDERING:
9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880
Emergency after hour parts orders (800) 334-4881
TECHNICAL SUPPORT:
Emergency 24 Hour Service (800) 222-0741
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010
Panasonic de Mexico S.A. de C.V.
Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300
Printed in Japan
@
F0402H1062
VQT9968-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|