Owner’s Manual
Dual Camera
Model No.
HX-DC3
Please read these instructions carefully before using this product, and
save this manual for future use.
Register online at www.panasonic.com/register (U.S. customers only)
VQT4U88
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ About Condensation (When the lens or the LCD
monitor is fogged up)
Condensation occurs when there is a change in temperature or humidity,
such as when the unit is taken from outside or a cold room to a warm
become soiled, moldy, or damaged.
When taking the unit to a place which has a different temperature, if the
unit is accustomed to the room temperature of the destination for about
one hour, condensation can be prevented. (When the difference in
temperature is severe, place the unit in a plastic bag or the like, remove
air from the bag, and seal the bag.)
When condensation has occurred, remove the battery and/or the AC
adaptor and leave the unit like that for about one hour. When the unit
becomes accustomed to the surrounding temperature, fogginess will
disappear naturally.
∫ Cards that you can use with this unit
SD Memory Card, SDHC Memory Card and SDXC Memory Card
≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB
or more Memory Cards that do not have the SDXC logo are not based
on SD Memory Card Specifications.
≥ Refer to page 16 for more details on SD cards.
∫ For the purposes of this owner’s manual
≥ SD Memory Card, SDHC Memory Card and SDXC Memory Card are
referred to as the “SD card”.
≥ Functions that can be used for motion picture recording/motion picture
playback are indicated by
≥ Functions that can be used for still picture recording/still picture
playback are indicated by in this owner’s manual.
≥ Functions that can be used for audio recording/audio playback are
indicated by in this owner’s manual.
in this owner’s manual.
≥ Pages for reference are indicated by an arrow, for example: l 00
≥ “File” is used to mean “scene”, “still picture” and “audio file”.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 3 -
Contents
Read this first..................................................................................... 2
Preparation
Power supply.................................................................................... 10
Inserting/removing the battery..................................................... 10
Charging the battery ................................................................... 12
Charging and recording time....................................................... 14
Recording to a card ......................................................................... 16
Inserting/removing an SD card.................................................... 18
Turning the unit on/off..................................................................... 20
About Standby Mode................................................................... 20
Selecting a mode ............................................................................. 22
Setting date and time....................................................................... 23
Basic
Before recording.............................................................................. 25
Recording motion pictures ............................................................. 27
Recording still pictures................................................................... 30
About recording still pictures during motion picture recording
and audio recording .................................................................... 33
Recording audio............................................................................... 34
Intelligent Auto Mode ...................................................................... 36
Motion picture/Still picture/Audio playback.................................. 39
Using the menu screen ................................................................... 43
Using Option Menu.......................................................................... 45
OPTION MENU 1........................................................................ 45
OPTION MENU 2........................................................................ 47
OPTION MENU 3........................................................................ 49
Download from Www.Somanuals.com. All Manuals Search And Download.
- 4 -
Advanced (Recording)
Using the zoom ................................................................................ 52
Double range zoom..................................................................... 53
Image Stabilizer................................................................................ 55
Recording panorama still pictures................................................. 59
RECORDING MENU 1................................................................ 62
RECORDING MENU 2................................................................ 70
RECORDING MENU 3................................................................ 73
RECORDING MENU 4................................................................ 75
Playback Operations ....................................................................... 84
Playback using operation icon .................................................... 84
Creating still picture from motion picture..................................... 86
Cutting out a section of a panorama still picture ......................... 87
Zooming in on a still picture during playback
(Playback zoom) ......................................................................... 87
Various playback functions ............................................................ 89
Changing the playback settings and playing back the
slide show ................................................................................... 89
Displaying file information ........................................................... 91
Using the playback menu................................................................ 93
PLAYBACK MENU 1................................................................... 93
PLAYBACK MENU 2................................................................... 95
Deleting files/folders...................................................................... 100
Protecting a file ......................................................................... 103
Watching Video/Pictures on your TV ........................................... 104
Connecting with an HDMI mini cable ........................................ 108
TV format setting....................................................................... 108
Playback using VIERA Link™....................................................... 109
Download from Www.Somanuals.com. All Manuals Search And Download.
- 5 -
Dubbing images onto other video devices.................................. 113
With a PC
Operating environment ................................................................. 120
Installation...................................................................................... 124
Connecting to a PC........................................................................ 125
Use as a card reader ................................................................ 126
Using the unit as a web camera................................................ 129
Starting HD Writer VE 3.0 .............................................................. 131
Reading the operating instructions of the software
applications............................................................................... 131
If using Mac .................................................................................... 132
Using the Eye-Fi™ card................................................................. 134
Others
Indications...................................................................................... 138
Messages........................................................................................ 142
Troubleshooting............................................................................. 143
Cautions for use............................................................................. 151
About copyright ............................................................................. 157
Recording Modes/approximate recordable time......................... 159
Approximate number of recordable pictures.............................. 161
Download from Www.Somanuals.com. All Manuals Search And Download.
- 6 -
Preparation
1
2
3
4
1
LCD monitor (l 26)
Due to limitations in LCD production
technology, there may be some tiny bright or
dark spots on the LCD monitor screen.
However, this is not a malfunction and does
not affect the recorded picture.
≥ It can open up to 90o.
≥ It can rotate up to 180o A towards the lens or 105o B towards the
opposite direction.
2
3
Power button [
USB/AV connector (l 12, 104, 113, 125)
] (l 20)
≥ Use the USB cable/AV cable (only the supplied cable).
HDMI mini connector (l 104, 109)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
- 7 -
6
7
8
9
10
5
14
15
13
5
Hand strap fixture
6
7
8
Zoom range button [
Photoshot button [
SET button [SET] (l 39, 43, 77, 84)
] (l 53)
] (l 30)
≥ Use the SET button to select the recording functions and playback
operations, and to operate the menu screen.
≥ In this owner’s manual, the operation of the SET button is denoted as
shown below.
Example:
or
Select using the SET button
9
In Recording Mode: Zoom lever [W/T] (l 52)
In Playback Mode: Volume lever (l 41, 90)
Zoom lever [W/T] (l 87)
Thumbnail display switch [
/
] (l 41)
10 Recording start/stop button [
11 MENU button [MENU] (l 43)
] (l 27)
l 22
12 REC/
button [REC/
]
(
)
13 Battery/Card cover (l 10, 18)
14 Battery holder
15 Card slot
Download from Www.Somanuals.com. All Manuals Search And Download.
- 8 -
18
19
16 17
20
21
16 Lens
≥ When not using the unit, be sure to fit the lens cap to protect the lens.
≥ Keep the lens cap out of reach of children to prevent swallowing.
17 Speaker
18 Status indicator (l 2, 12, 18, 155)
19 Internal stereo microphones
20 Built-in flash (l 70)
21 Tripod receptacle
≥ If you attach a tripod which has a 5.5 mm (0.22 q) screw or larger, it
may damage this unit. The screw may also be difficult to tighten
depending on the type of tripod used.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 9 -
Preparation
Power supply
∫ About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBX070.
It has been found that counterfeit battery packs which look very
similar to the genuine product are made available to purchase in
some markets. Some of these battery packs are not adequately
protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that
we are not liable for any accident or failure occurring as a result of
use of a counterfeit battery pack. To ensure that safe products are
used we would recommend that a genuine Panasonic battery pack
is used.
Inserting/removing the battery
≥ Press the power button to turn off the unit. (l 20)
1 Open the battery/card cover.
1
Slide while pushing the battery/
card cover.
2
Open the battery/card cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 10 -
2
Insert the battery, taking care to match up the terminal markings.
A
terminal markings
≥ Insert the battery so that the terminal markings face up. It is possible to
mistakenly insert the battery upside down, so be sure to check the
orientation carefully.
3 Close the battery/card cover.
≥ Securely close it until it clicks.
Removing the battery
Press and hold down the power button to turn off the unit, then pull up and
remove the battery.
≥ Always check that the LCD monitor and status indicator lamp are off.
≥ Keep the battery pack out of reach of children to prevent swallowing.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 11 -
Charging the battery
When this unit is purchased, the battery is not charged. Charge
the battery fully before using this unit for the first time.
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always “live” as long as the AC adaptor is
connected to an electrical outlet.
Important:
≥ The AC adaptor and USB cable are for use with this unit only. Do
not use them with other equipment. Similarly, do not use AC
adaptors and USB cables from other equipment with this unit.
≥ The battery is charged while the unit is off or in the Standby Mode.
(l 20)
The battery cannot be charged while the unit is recording or
playing back.
≥ It is recommended to charge the battery in a temperature between
10 oC and 30 oC (50 oF and 86 oF). (The battery temperature should
also be the same.)
A
B
C
Status indicator
AC adaptor
To the AC outlet
≥ Insert the plugs as far as they will go.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 12 -
1 Connect the USB cable to the AC adaptor.
≥
Check that the plug portion of the AC adaptor is not misaligned.
2 Connect the AC adaptor into the AC outlet.
3 Connect the USB cable to the unit.
≥
Connecting the USB cable in the wrong direction may cause damage to
it may not operate correctly, including failure to recognize the cable even if
it has been connected.
≥
The status indicator flashes red with a period of approximately 2 seconds
(approximately 1 second on, 1 second off), and charging begins.
It will turn off when the charging is completed.
≥ Do not use any other AC adaptors except the supplied one.
≥ Do not use any other USB cables except the supplied one.
≥ We recommend using Panasonic batteries (l 14).
≥ If you use other batteries, we cannot guarantee the quality of this
product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
≥ For charging by connecting to another device, refer to page 128.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to
page 155.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 13 -
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC (77 oF)/humidity: 60%RH (When using AC
adaptor)
Battery model
number
[Voltage/Capacity
(minimum)]
Maximum
Charging Recording continuously
Actual
recordable
time
time
Mode
recordable
time
50 min
55 min
30 min
35 min
30 min
35 min
45 min
40 min
s
Supplied battery/
VW-VBX070
(optional)
50 min
2 h
1 h 5 min
1 h 25 min
1 h 5 min
1 h 30 min
[3.7 V/700 mAh]
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been
discharged completely. Charging time and recordable time vary
depending on the usage conditions such as high/low
temperature.
≥ The actual recordable time refers to the recordable time when
repeatedly starting/stopping recording, turning the unit on/off, moving
the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 14 -
Battery capacity indication
≥ The display changes as the battery capacity reduces.
#
#
#
#
(red)
is displayed.
When the charge is low,
≥ Due to the characteristics of the battery, it may not be possible to
correctly display the charge remaining on the battery. For instance,
at low temperatures, the
indicator may turn on earlier.
Because the status of the charge remaining indicator changes
according to the ambient temperature, conditions of use, etc., the
indicator should be considered as an approximate guide.
∫ Approximate operating time and number of
recordable still pictures
Number of
recordable
pictures
Approx. 210 pictures
Approx. 105 min
By CIPA standard
Recording time
Playback time
Approx. 210 min
Recording conditions by CIPA standard
≥ CIPA is an abbreviation of Camera & Imaging Products Association.
≥ Use of supplied battery
≥ Using a Panasonic SD Memory Card (2 GB)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 15 -
Preparation
Recording to a card
The unit can record motion pictures, still pictures or audio to an SD card
or built-in memory. To record to an SD card, read the following.
This unit (an SDXC compatible device) is compatible with SD Memory
Cards, SDHC Memory Cards and SDXC Memory Cards. When using
an SDHC Memory Card/SDXC Memory Card with other equipment,
check the equipment is compatible with these Memory Cards.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed
Class Rating* for motion picture recording.
Card type
Capacity
512 MB/1 GB/2 GB
SD Memory Card
4 GB/6 GB/8 GB/12 GB/16 GB/
24 GB/32 GB
SDHC Memory Card
SDXC Memory Card
48 GB/64 GB
* SD Speed Class Rating is the speed standard regarding continuous
writing. Check via the label on the card, etc.
e.g.:
Download from Www.Somanuals.com. All Manuals Search And Download.
- 16 -
≥ Please confirm the latest information about SD Memory Cards/SDHC
Memory Cards/SDXC Memory Cards that can be used for motion
picture recording on the following website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
≥ To use the Eye-Fi transfer feature (l 134), an Eye-Fi X2 series SD
card is required.
≥ Operation of SD Memory Cards with a capacity of 256 MB or less is not
guaranteed.
≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB
or more Memory Cards that do not have the SDXC logo are not based
on SD Memory Card Specifications.
≥ The operation of Memory cards exceeding 64 GB cannot be
guaranteed.
≥ When the write-protect switch A on SD card is
locked, no recording, deletion or formatting will be
possible on the card.
≥ Keep the Memory Card out of reach of children to
prevent swallowing.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
- 17 -
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on
other equipment, for the first time on this unit, format the SD
card. (l 48) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the status indicator has gone off.
1 Open the battery/card cover.
Status indicator A
≥ When this unit is
accessing the SD card
or built-in memory, the
status indicator lights up
red.
2 Insert (remove) the SD card into (from) the card slot.
≥ Face the label side B in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the center of the SD card and then pull it straight out.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 18 -
3 Close the battery/card cover.
≥ Securely close it until it clicks.
≥ Do not touch the terminals on the back of the SD card.
≥ Do not shock, bend, or drop the SD card.
≥ Electrical noise, static electricity or the failure of this unit or the SD card
may damage or erase the data stored on the SD card.
≥ When the status indicator (l 9) illuminates in red, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Performing the above while the indicator is on may result in damage to
data/SD card or this unit.
≥ Do not expose the terminals of the SD card to water, dirt or dust.
≥ Do not place SD cards in the following areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant difference in temperature
(condensation can occur.)
jWhere static electricity or electromagnetic waves occur
≥ To protect SD cards, return them to their cases when you are not using
them.
≥ About disposing of or giving away the SD card. (l 156)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 19 -
Preparation
Turning the unit on/off
Open the LCD monitor and press the power button to
turn on the unit.
The LCD monitor turns on.
To turn off the unit
Hold down the power button until the
LCD monitor goes off.
≥ Pressing the power button for a short
time sends the unit into Standby
Mode. (l 20)
About Standby Mode
When the LCD monitor is closed while the unit is on, the unit enters
Standby Mode which consumes very little power.
Standby Mode allows pictures to be recorded as soon as the LCD
monitor is opened. Setting [QUICK START] to [ON] will allow the device
to switch to Recording Standby Status even faster. (l 45)
Use Standby Mode when you stop using the unit but intend to use it
again after a short time.
≥ The unit does not go into Standby Mode when you close the LCD
monitor during motion picture recording or audio recording.
≥ If you open the LCD monitor when in Standby Mode, the unit enters
Recording Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 20 -
≥ If the unit has not been operated for approximately 5 minutes (settings
at the time of purchase) when the power is turned on, the ECONOMY
function will activate and switch to Standby Mode to limit power
consumption in situations such as the user forgetting to turn the unit
off.
jWhen the unit is in Standby Mode, you can turn on the unit by
pressing the power button.
jThe time until the unit goes into Standby Mode can be changed.
(l 47)
About the high temperature warning icon
If the battery temperature or unit internal temperature (excluding battery) rises,
the high temperature warning icon
will provide warning as indicated below.
Battery/unit
internal
temperature
Screen
display
Unit operation
Although it is possible to record/play
back, please stop using the unit as
soon as possible and turn off the
unit.
(Lighting)
Motion picture recording is no longer
possible. (If you are recording a
motion picture, the recording stops.)
Please turn off the unit.
After the flashing of the
unit turns off automatically. The unit
does not turn on when the
, the
(Flashing)
temperature drops. (
flashes.)
Wait for the temperature to drop
before using the unit again.
A
High temperature
≥ When you turn off the unit while the temperature is high (
is
lighting), you will not be able to turn on the unit again until the
temperature lowers. (
will flash.)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 21 -
Preparation
Selecting a mode
Change the mode to recording or playback.
Press the REC/
≥ Each press of the REC/
button.
button changes the mode.
For recording motion pictures,
still pictures and audio
Recording Mode (l 27, 30, 34)
For playing back motion
pictures, still pictures and audio
Playback Mode (l 39, 84)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 22 -
Preparation
Setting date and time
If the screen to set the date and time appears when you turn on the unit,
skip to step 2 and follow the steps to set the date and time.
1 Select the menu. (l 43)
[MENU]:
# [CLOCK SET]
1
2 Select an item ([DATE]/[TIME]/[DISP]) using the SET
button and then tilt the SET button to the right or
press the SET button.
3 (When [DATE] or [TIME] is selected)
Tilt the SET button to the left or right to select the
desired item and then up and down to set the
numerical values.
e.g.: When [DATE] is selected
≥ The year can be set between 2000 and 2039.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 23 -
(When [DISP] is selected)
Select the date format display method using the SET
button.
4 Press the SET button.
5 Select [SAVE DATE AND TIME] using the SET button
and then press the SET button.
≥ To return to the recording screen or playback screen, press the MENU
button.
≥ At the time of purchase, the [CLOCK SET] is not set.
≥ If the [CLOCK SET] have not been set or the built-in clock battery has
run down, the screen display and recording time information will
appear as follows.
Recording screen display: --- -- ---- --:----
Recording time information: JAN 01 2013 12:00AM
≥ To charge the built-in clock battery, install a fully charged battery in the
unit. If you leave the battery for approximately 24 hours, the time
settings will be stored for approximately 7 days. (The charging
continues even when the unit is turned off)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 24 -
Basic
Before recording
∫ Basic camera positioning
Example 1:
Example 2:
Grip the unit with the forefinger of
Grip the unit with the forefinger to
your right hand above the lens and little finger of your right hand
the middle finger to little finger
surrounding the body.
surrounding the body.
≥ To avoid dropping the unit, be sure to attach a handstrap.
≥ When recording, make sure your footing is stable and there is no
danger of colliding with another person or object.
≥ When you are outdoors, record pictures with the sunlight behind you. If
the subject is backlit, it will become dark in the recording.
≥ Keep your arms near your body and separate your legs for better
balance.
≥ When performing zoom operations, you can prevent the jitter
associated with zoom operations by placing your other hand on the
LCD monitor to stabilize the unit.
≥ Ensure that the lens and flash are not obstructed by your fingers or the
handstrap. Also, ensure that your hand is not blocking the
microphones on the LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 25 -
∫ Basic motion picture recording
≥ The unit should normally be held steady when recording.
≥ If you move the unit when recording, do so slowly, maintaining a
constant speed.
≥ The zoom operation is useful for recording subjects you cannot get
close to, but overuse of zoom in and zoom out can make the resulting
motion picture less enjoyable to watch.
∫ Recording yourself
Rotate the LCD monitor towards the lens side.
≥ The image is horizontally flipped
as if you see a mirror image.
(However the image recorded is
the same as a normal recording.)
∫ If the surface of the unit gets hot
Due to the characteristics of the unit, the outer surface may become
warm during use, but this does not indicate a malfunction.
≥ If the unit starts to feel uncomfortably hot during use, you might
temporarily discontinue use until it cools down, or try holding it in your
other hand for a while. Please use a tripod or other support when using
the unit for a long time.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 26 -
Basic
Recording motion pictures
≥ Before turning on the unit, remove the lens cap.
≥
Motion pictures are recorded to the SD card if one is inserted. If no SD
card is inserted, the motion pictures are recorded to the built-in memory.
1 Open the LCD monitor.
2 Press the recording start/stop button to start
recording.
000:00:00
A
When you begin recording, ¥ appears.
3 Press the recording start/stop button again to pause
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 27 -
∫ About the screen indications in the motion picture
recording
000:00:15
Recording Mode (l 62)
Motion picture operation indicator (l 140)
During motion picture recording
μ (Red)
When the remaining recordable time drops to
approximately 30 seconds or less, μ flashes.
During recording:
Recording time elapsed
counter display will be reset to 000:00:00.
000:00:15
During recording standby:
Approximate remaining recordable time*
* When [CREATIVE CONTROL] (l 64) is set to
MINI
(Miniature Effect
(Time Lapse Rec (INTV)), the maximum recordable time
INTV
(MINI)) or
for one scene (012:00:00) is displayed. (When the remaining space on
the SD card is equal to less than 12 hours or when recording to the
built-in memory, the remaining recordable time on the SD card or built-
in memory is displayed.)
≥ The images recorded between pressing the recording start/stop button
to start recording and pressing it again to pause recording become one
scene.
≥ If the file size exceeds 4 GB during recording, the unit saves the file
and saves the continuation in a new file. (A new file is created
automatically every 4 GB (l 42))
≥ While recording is in progress, the recording will not stop even if the
LCD monitor is closed.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 28 -
≥ Recording may become out of focus if the unit is subjected to shock
while the power is turned on. If this happens, hold the power button
until the LCD monitor turns off to turn the power to the unit off, and turn
the power on again.
≥ Maximum number of recordings per SD card
file
: 899100
folder : 900
≥ Please refer to page 159 for details about approximate recordable
time.
About the compatibility of the recorded motion
pictures
≥ They are not compatible with devices other than those that support
MP4. Images cannot be played with equipment that does not
support MP4. Confirm that your equipment supports MP4 by
referring to the operating instructions.
≥ There are some cases where the recorded motion pictures cannot
be played back, even if the device supports MP4. In such a case,
play back on this unit instead.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 29 -
Basic
Recording still pictures
≥ Before turning on the unit, remove the lens cap.
≥ Still pictures are recorded to SD card if one is inserted. If no SD card is
inserted, the still pictures are recorded to the built-in memory.
1 Open the LCD monitor.
2 (For Auto Focus only)
Press the
button halfway.
F3.5
1/30
Focus area (area inside brackets)
A
3 Press the
button fully.
≥ If you continue to hold down the
button, you can check the
recorded image on the LCD monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 30 -
∫ About the recording standby screen display
The field of view of the image displayed on the LCD monitor differs for
motion picture recording and still picture recording. At time of purchase,
the recording standby screen displays video view. Press the
halfway to change to photo view.
button
≥ When [PHOTO VIEW] is set to
(ON), you can change the recording
standby screen display to the photo view. (l 72)
Video view
Photo view
A
Video recording area
∫ About the screen indications in the still picture
recording
16
3000
M
ISO400
F3.5
1/30
Still picture operation indicator (l 138)
Size of still pictures (l 63)
Remaining number of still pictures
Flash (l 70)
3000
ß
ISO400
F3.5
ISO (l 74)
Iris value
1/30
Shutter speed
Image Stabilizer for still picture (l 56)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 31 -
∫ About the focusing area
≥ When [FOCUS MODE] (l 75) is set to
(9-PT AUTOFOCUS),
(focusing
16M
area A) is displayed at the position where
focus is achieved.
The unit automatically determines the
position where focus is achieved from nine
focus points within the recording area. If the
focusing area doesn’t appear in a desired position, try adjusting the
camera angle etc., and focus again.
a large focusing area is displayed.
≥ When [FOCUS MODE] (l 75) is set to [SPOT FOCUS], the unit can
focus on the subject in the center of the recording area.
≥ When the risk of jitter increases due to a slower shutter speed while
recording still picture,
(camera shake icon) will appear on the LCD
monitor. When this occurs, attach the unit to a tripod to prevent jitter
while recording or set [FLASH] to ßA (AUTO). (l 70)
≥ When recording in a dark environment, writing to the card may take
time.
≥ To print a picture, save the picture to the SD card (l 111) and print
using a PC or a printer.
≥ The edges of still pictures recorded on this unit with a 16:9 aspect ratio
may be cut at printing. Check the printer or photo studio before
printing.
≥ Please refer to page 161 for details about the number of recordable
pictures.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 32 -
About recording still pictures during
motion picture recording and audio
recording
You can record still pictures while recording a motion picture or while
recording audio. (simultaneous recording)
Press the
button fully (press to the bottom) to take
the picture.
≥ When the recordable time drops to approximately
30 seconds or less, the unit can no longer record still
pictures while recording a motion picture or while
recording audio.
≥ The still picture operation indicator (
still pictures.
) will turn red while recording
≥ No shutter sound is emitted when recording still pictures.
∫ About picture size
When you record a still picture while recording a motion picture or audio,
the picture size will depend on the Recording Mode. (l 62)
Recording
Mode
Picture size
1920k1080
Aspect ratio
/
/
/
16:9
16:9
4:3
0.9M
1280k720
640k480
≥ Still pictures cannot be recorded during
recording.
≥ Burst recording is not possible.
≥ The Flash (l 70) and Image Stabilizer for still picture (l 56) are
disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 33 -
Basic
Recording audio
≥ Audio is recorded to the SD card if one is inserted. If no SD card is
inserted, the audio is recorded to the built-in memory.
1 Open the LCD monitor.
2 Select the menu. (l 43)
[MENU]:
# [REC MODE] # [
(VOICE RECORD)]
1
3 Start recording by pressing the recording start/stop
button.
4 Press the recording start/stop button again to stop
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 34 -
∫ About the screen display for audio recording
000:00:15
Audio operation indicator (l 139)
During audio recording
(Red)
When the remaining recordable time drops to
approximately 30 seconds or less, μ flashes.
During audio recording:
Recording time elapsed
Every time recording is stopped, the indicator
returns to 000:00:00.
000:00:15
During audio recording standby:
Maximum recordable time for one file
(005:00:00)*
* When the remaining space on the SD card is equal to less than 5 hours
or when recording to the built-in memory, the remaining recordable
time on the SD card or built-in memory is displayed.
≥ When the recording time exceeds approximately 5 hours, the file is
saved and the audio recording ends.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 35 -
Basic
Intelligent Auto Mode
The following modes (appropriate for the condition) are set just by
pointing the unit to what you want to record.
Select the menu. (l 43)
[MENU]:
# [INTELLIGENT AUTO] # [
(ON)]
1
MENU
≥ Please refer to page 81 for details about Manual Mode.
Mode
Effect
Portrait
Faces are detected and focused
automatically, and the brightness is adjusted
so it is recorded clearly.
Scenery
The whole landscape will be recorded vividly
without whiting out the background sky,
which may be very bright.
*1
*1
Spotlight
Low Light
Very bright object is recorded clearly.
It can record very clearly even in a dark
room or twilight.
*2
*2
*2
Night Portrait
Night Scenery
Macro
A person and the background are recorded
with near real-life brightness.
You can record night scenery vividly by
slowing the shutter speed.
This allows recording while going near to the
object of recording.
*1
*2
Normal
Adjusts the contrast and gives a clean image
when not using the above modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 36 -
*1 Mode for motion picture recording only
*2 Mode for still picture recording only
≥ Depending on the recording conditions, the unit may not enter the
desired mode.
≥ We recommend using a tripod in Night Portrait/Night Scenery/Low
Light.
≥ Faces cannot be detected depending on the recording conditions, such
as when faces are of certain sizes or at certain tilts or when Digital
Zoom is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 37 -
∫ Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Automatic White Balance
and Auto Focus operate and automatically adjust the color balance and
focusing.
Depending on the brightness of the subject etc., the aperture and shutter
speed are automatically adjusted for an optimum brightness.
≥ Color balance and focus may not be adjusted automatically depending
on light sources or scenes. If so, manually adjust these settings. (l 81,
83)
Automatic White Balance
The illustration shows the range over which Automatic White Balance
functions.
2)
10 000K
9 000K
8 000K
1) The effective range of Automatic
White Balance adjustment on this unit
2) Blue sky
3) Cloudy sky (rain)
4) Sunlight
5) White fluorescent lamp
6) Halogen light bulb
7) Incandescent light bulb
8) Sunrise or sunset
9) Candlelight
If the Automatic White Balance is not
functioning normally, adjust the White
Balance manually. (l 81)
3)
7 000K
6 000K
4)
5 000K
4 000K
5)
1)
6)
3 000K
2 000K
7)
8)
9)
Auto Focus
The unit focuses automatically.
≥ Auto Focus does not work correctly in the following situations. Record
pictures in the Manual Focus Mode. (l 83)
jRecording distant and close-up objects at the same time
jRecording a subject behind dirty or dusty window
jRecording a subject that is surrounded by objects with glossy
surfaces or by highly reflective objects
Download from Www.Somanuals.com. All Manuals Search And Download.
- 38 -
Basic
Motion picture/Still picture/Audio
playback
1 Press the REC/
button to change to Playback
Mode.
2 Select the file to play back using the SET button and
press the SET button.
Thumbnail display
A
The information for the file in the yellow frame is displayed.
≥ Tilt and hold the SET button up or down to display the next (or
previous) page.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 39 -
3 Play back using the SET button.
Motion picture/audio playback
Playback/Pause
Fast rewind playback
Fast forward playback
Stops the playback and
shows the thumbnails.
B
Operation icon*
* If the operation icon disappears, perform a SET button operation to
display it.
Still picture playback
Deletes still picture (l 100)
Displays previous file
Displays next file
Stops playback and returns to
thumbnail display
Download from Www.Somanuals.com. All Manuals Search And Download.
- 40 -
∫ Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in the
following order if the zoom lever is operated to
side or
side.
21 files () 8 files () 1 file
≥ If you move the zoom lever to the
side from the 21
files display mode, the unit goes to the playback folder
selection screen. (l 50)
≥ If you move the zoom lever to the
side with a still
picture in a single file display state, the unit enters playback
zoom (l 87).
≥ When the SET button is tilted to the right (left) during single file display,
the next (previous) file is displayed.
≥ When following operations are performed, 8 file display is restored.
jIf you turn the unit off
jIf you change the Recording Mode
jIf you display the menu screen
∫ Speaker volume adjustment
To adjust the speaker volume during motion picture or audio playback,
operate the volume lever during playback.
Towards
Increases the volume
Towards
Decreases the volume
:
T
W
:
VOLUME SETTING
≥ When a playback of a motion picture file or audio file ends, the
thumbnail display is restored. To playback files continuously, configure
the slideshow settings before playing back the file. (l 89)
≥ Except in normal motion picture/audio playback, sound is not emitted.
≥ The elapsed time for motion picture playback indication will be reset to
00:00:00 for each scene.
≥ The elapsed time for audio playback indication will be reset to
000:00:00 for each file.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 41 -
≥ Once the size of the recorded file exceeds 4 GB, the file will be saved
once, and the rest will be saved in a new file. In this case, is
displayed in the thumbnail screen for the 8 files. When files over 4 GB
is subsequently recorded in a single card multiple times, it is
distinguished by displaying
and red).
icon in 4 colors (green, blue, yellow,
≥ Closing the LCD monitor stops playback and sends the unit into
Standby Mode. (l 20)
Motion picture compatibility
≥ The unit conforms to the MP4 format (MPEG-4 AVC file standard).
≥ Motion pictures recorded on other MP4-compatible equipment may
not play back normally or may not play back at all on this unit.
Similarly, motion pictures recorded on this unit may not play back
normally or may not play back at all on other MP4-compatible
equipment.
Still picture compatibility
≥ This unit conforms to the universal DCF (Design rule for Camera
File system) standard and Exif (Exchangeable Image File Format)
stipulated by JEITA (Japan Electronics and Information Technology
Industries Association). Files which do not conform to the DCF
standard cannot be played back.
≥ The file format of still pictures supported by this unit is JPEG. (Not
all JPEG formatted files will be played back.)
≥ This unit may degrade or not play back still pictures recorded or
created on other products and other products may degrade or not
play back still pictures recorded on this unit.
Audio compatibility
≥ The unit conforms to the AAC file standard.
≥ This unit may degrade or not play back audio recorded or created
on other products and other products may degrade or not play back
audio recorded on this unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 42 -
Basic
Using the menu screen
1 Press the MENU button.
2 Tilt the SET button to the left.
3 Select tab A using the SET button, and tilt the SET
button to the right or press the SET button.
4 Select from menu items B using the SET button, and
tilt the SET button to the right, or press the SET
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 43 -
5 Select the setting content using the SET button and
press the SET button to set.
∫ About applicable mode indicator
In the recording menu, the Recording Mode that reflects the currently
displayed setting is displayed.
C
Applicable mode indicator
: Setting is applied to still picture and motion picture recording.
: Setting is applied to still picture recording.
: Setting is applied to motion picture recording.
To get back to the previous screen
Press the MENU button.
To end the menu setting
Press the MENU button several times.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 44 -
Basic
Using Option Menu
Select the menu.
[MENU]:
,
or
# desired setting
1
2
3
OPTION MENU 1
1
[CLOCK SET]
Please refer to page 23.
[QUICK START]
Opening the LCD monitor will switch from Standby Mode to Recording
Standby Status in approximately 0.5 seconds (in Recording Mode only).
≥ When in Quick Start Standby Mode about 48% of the power used
in recording standby mode is being consumed, so the recording
time will be reduced.
≥ Set to Recording Mode. (l 22)
1
Select [QUICK START] with the SET button and press the
SET button.
2
3
Select [ON] with the SET button and
press the SET button.
Close the LCD monitor.
The status indicator A flashes green and the
unit goes into Quick Start standby mode.
4
Open the LCD monitor.
The status indicator A will turn off and switch
to Recording Standby Status.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 45 -
≥ Quick Start Standby Status will be unlocked after approximately
5 minutes and will switch to Standby Mode.
≥ If [ECONOMY] (l 47) is activated and the device switches to Quick
Start Standby Status automatically, pressing any button on the unit will
switch to Recording Standby Status.
≥ Depending on the recording conditions and menu settings, time for
Quick Start may be longer than 0.5 seconds.
≥ It may take some time for Automatic White Balance to adjust.
[ALERT SOUND]
Set the type and volume of operation sounds for the unit.
[TURN ON/OFF]:
Sets the sound emitted when the unit is turned on/off. ([ON]/[OFF])
[RECORD BEEP]:
Sets the sound emitted when recording is started and stopped.
([ON]/[OFF])
[SHUTTER]:
Sets the sound emitted when the
([OFF]/[A]/[B]/[C]/[D])
button is pressed.
[KEY SW]:
Sets the sound emitted when the buttons (SET button, MENU button,
etc.) are pressed. ([OFF]/[A]/[B]/[C]/[D])
[OPERATION VOL]:
Sets the volume of the operation sounds. ([1] to [7])
[ALL OFF]/[OPERATION SOUNDS ON]:
Sets all operation sounds on/off
[DISPLAY]
Turns screen display [ON] (display) or [OFF] (not-display).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 46 -
[ECONOMY]
Set the standby time for the unit to switch to Standby Mode. (l 20)
[BATTERY:REC]:
Sets the time for which the unit is in the
Recording Mode using the battery, before it
goes into Standby Mode.
([1 min]/[3 min]/[5 min]/[10 min])
[BATTERY:PLAY]: Sets the time for which the unit is in the
Playback Mode using the battery, before going
into Standby Mode.
([1 min]/[3 min]/[5 min]/[10 min]/[30 min])
[AC:REC/PLAY]:
Sets the time for which the unit is in the
Recording/Playback Mode using the AC
adaptor, before going into Standby Mode.
([1 min]/[3 min]/[5 min]/[10 min]/[30 min]/
[60 min])
[BRIGHTNESS]
Sets the brightness of the LCD monitor of the unit (7 steps).
OPTION MENU 2
2
[LANGUAGE]
You can select the language on the screen display and the menu screen.
[TV OUTPUT]
[TV SYSTEM]:
[TV ASPECT]:
[HDMI]:
Please refer to page 108.
Please refer to page 107.
Please refer to page 108.
Please refer to page 109.
[VIERA Link]:
Download from Www.Somanuals.com. All Manuals Search And Download.
- 47 -
[INITIAL SET]
Returns the unit settings to the settings at the time of purchase.
≥ Settings for [CLOCK SET], [LANGUAGE] and the double range zoom
will not be changed.
[FORMAT]
Please be aware that if a medium is formatted, then all the data recorded
on the medium will be erased and cannot be restored. Back up important
data on a PC, disc, etc. (l 115)
≥ To format the built-in memory, perform a format with the SD card
removed.
[FORMAT]:
A logical format is performed on the SD card or built-in memory.
[DELETE DATA]:
A physical format is performed on the SD card or built-in memory.
Select [FORMAT] or [DELETE DATA] using the SET button and
press the SET button.
≥ When selecting [DELETE DATA], please use the AC adaptor. When
using the battery, [DELETE DATA] cannot be selected.
≥ Select [DELETE DATA] and perform a physical formatting of the SD
card when the SD card is to be disposed/transferred.
≥ Select [DELETE DATA] and perform a physical formatting of the built-in
memory when this unit is to be disposed/transferred.
≥ Do not turn this unit off or remove the SD card, while formatting. Do not
expose the unit to vibrations or shock.
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a
PC. The card may not be used on this unit.
[Eye-Fi]
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 134.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 48 -
OPTION MENU 3
3
[REC FOLDER]
Creates or selects a recording folder (folder containing a recorded file).
(SD card recording only)
≥ Insert the SD card.
≥ Set to Recording Mode. (l 22)
1
Select [REC FOLDER] using the SET button and press the SET
button.
2
(When creating a folder)
Select [CREATE NEW FOLDER] using the SET button and press
the SET button.
≥ The created folder is set as the recording folder.
(When selecting a folder)
Select the folder number of the desired folder using the SET
button and press the SET button.
≥ You cannot select folders which have been created on other
equipment or folders which already contain the maximum number
of files.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 49 -
[PLAYBACK FOLDER]
When the SD card or built-in memory contains multiple folders, you can
select a folder for playback.
≥ Set to Playback Mode. (l 22)
1
Select [PLAYBACK FOLDER] using the SET button and press
the SET button.
2
Select the folder to play back using the SET button and press
the SET button.
≥ All the recorded files are displayed in the thumbnail screen, and yellow
frame is displayed on the first file in the selected folder.
3
Select the file to playback using the SET button and press the
SET button.
[FILE NO. CONT’D]
This function sets the file numbers when the card is exchanged or
formatted.
[ON]:
File numbers are retained even when the card is
exchanged or formatted.
[OFF]:
File numbers are reset to start from [0001] when the
card is exchanged or formatted.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 50 -
When [FILE NO. CONT’D] is set to [ON] and there are files remaining
on the newly inserted card, the files subsequently recorded on the
card will be numbered as described below.
When the newly inserted card contains file numbers which are
smaller than the file numbers recorded before changing the
cards
The numbering continues from the file currently being recorded.
Example:
If you record files up to 0015 on a first card and then exchange the
first card for a second card, which already has files up to 0005
recorded on it, the new file numbers on the second card will start from
0016.
When the newly inserted card contains file numbers which are
larger than the file numbers recorded before changing the cards
The file number will be consecutive to the last file number recorded on
the second card.
Example:
If you record files up to 0005 on a first card and then exchange the
first card for a second card, which already has files up to 0015
recorded on it, the new file numbers on the second card will start from
0016.
≥ In the case of the built-in memory, when [FILE NO. CONT’D] is set to
[ON] the file numbers can be given consecutive in the same way as
when the card is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 51 -
Advanced (Recording)
Using the zoom
≥ Set to Recording Mode. (l 22)
Zoom lever
T side:
Close-up recording
(zoom in)
W side:
Wide-angle recording
(zoom out)
A
Zoom bar
≥ i.Zoom and Digital Zoom can be set in [ZOOM MODE]. (l 54)
∫ About the zoom bar
W
T
B
C
: Optical zoom
: i.Zoom/Digital Zoom (blue)
≥ During zoom operations, the zoom bar is displayed.
≥ The magnification displayed at the left and right of the zoom bar is the
minimum and maximum zoom magnification.
≥ When recording motion pictures at high levels of magnification, we
recommend fixing the unit to a tripod to prevent it moving.
≥ If you take your finger off the zoom lever during zoom operation, the
operation sound may be recorded. When returning the zoom lever to
the original position, move it quietly.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 52 -
≥ Angle of view displayed in the LCD monitor will differ when recording
motion picture or still picture. At the time of purchase, recording
standby screen is displaying the angle of view for recording motion
picture, and it will switch to angle of view for recording still picture when
the
button is pressed halfway. (l 31)
When recording a still picture, zoom operation will run smoothly when
[PHOTO VIEW] is set to
(ON) before performing zoom operation.
(l 72)
≥ The unit will focus from approximately 1 m (3.3 feet) or more when the
zoom magnification is at its maximum. When the zoom magnification is
1k, this unit can focus on a subject approximately 10 cm (3.9 q) away
from the lens. (When [INTELLIGENT AUTO] is set to [ON], or [FOCUS]
is set to
(MACRO), you can record from as close as 1 cm (0.39 q)
with the zoom magnification at 1 times and from 80 cm (2.6 feet) with
the zoom magnification at its maximum.)
Double range zoom
The enlarged size will be approximately double size (double range
zoom). Press again to return to normal size.
≥ Set to Recording Mode. (l 22)
Press the zoom range button.
≥ On the normal zoom recording screen, the
the double-range zoom recording screen, the
icon is displayed. On
icon is displayed.
≥ You cannot operate the zoom range button in the i.Zoom/Digital Zoom
region (blue). (l 52)
≥
The image enlarged using the double range zoom can be recorded only as
a motion picture. Still pictures are recorded without being enlarged.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 53 -
Zoom Mode
Set the Digital Zoom and i.Zoom.
≥ Select the menu.
[MENU]:
# [ZOOM MODE] # desired setting
1
(DIGITAL ZOOM):
(i.ZOOM):
Digital Zoom
This zoom function allows you to maintain
high-definition picture quality.
(OFF):
Optical zoom only
≥ The larger the Digital Zoom magnification, the more the image quality
is degraded.
≥ With still picture recording, i.Zoom is disabled.
∫ About the maximum zoom magnification
The maximum zoom magnification differs according to the mode and
settings of the unit.
T (Tele)
Zoom Mode setting
Image
Stabilizer Double
W
(Wide)
for
range
zoom
motion
pictures
(DIGITAL
(OFF) (i.ZOOM)
ZOOM)
1k
2k
1k
2k
6k
12k
5k
7.5k
15k
6k
60k
OFF/ON
Motion
picture
recording
120k
50k
ACTIVE
MODE
10k
12k
100k
Still
picture
–
–
1k
5k
5k
50k
recording
Download from Www.Somanuals.com. All Manuals Search And Download.
- 54 -
Advanced (Recording)
Image Stabilizer
Use the Image Stabilizer to reduce the effects of shake during recording.
≥ Set to Recording Mode. (l 22)
∫
Image Stabilizer for motion pictures
Select the menu.
[MENU]:
# [E.I.S.(VIDEO)] # desired setting
3
(ACTIVE MODE):
(ON):
This setting gives more stabilization and is
suitable for recording when moving.
This setting is suitable for recording in a
stable state such as scenery.
(OFF):
Cancel the setting.
≥
When
(ACTIVE MODE) is set, the field of view will differ from normal recording.
Video view in (ACTIVE MODE)
Video view in normal recording
Download from Www.Somanuals.com. All Manuals Search And Download.
- 55 -
∫
Image Stabilizer for still pictures
Select the menu.
[MENU]:
# [E.I.S.(PICTURE)] # [
(ON)]
3
≥ Image Stabilizer does not work during zoom operations.
≥ When recording with a tripod, we recommend that you set the Image
Stabilizer off.
≥ [SCENE MODE] will be set to
(OFF) when the [E.I.S.(PICTURE)] is
set to
Backlight Comp.).
(ON) while the [SCENE MODE] (l 66) is set to (HDR
≥ Stabilization may not be possible under strong camera shaking conditions.
≥ When [SCENE MODE] is set to (FIREWORKS), (NIGHT
(NIGHT PORTRAIT) or (LOW LIGHT), the Image
SCENERY),
Stabilizer may be less effective.
≥ The screen may shake when using optical zoom or during the Auto Focus
operation, but this does not indicate a fault.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 56 -
Advanced (Recording)
Burst recording
Records a sequence of still pictures at a rate of 10 per second or 1 per
second.
Use this function to record fast-moving subject.
≥ Set to Recording Mode. (l 22)
1 Select the menu.
[MENU]:
# [BURST] # desired setting
2
16
M
(16M BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the
button, ending the
recording when the maximum number pictures in the burst are reached.
(3M BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the
button, ending the
recording when the maximum number pictures in the burst are reached.
16
M
(16M REVERSE BURST):
Records approximately 1 still picture every 1 second.
The unit records as you hold down the
button. On release of the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
(3M REVERSE BURST):
Records approximately 10 still pictures every 1 second.
The unit records as you hold down the
button. On release of the
button, it stores the maximum number of pictures in the burst,
going back from the moment of release.
(OFF):
Cancel the setting.
2 (For Auto Focus only)
Press the
button halfway.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 57 -
3 Press the
button fully.
≥ During recording,
lights up in red.
≥ The Auto Focus works to fix the focus when the
button is pressed
halfway.
∫ Maximum number of pictures in the burst
Maximum number of pictures
[BURST] setting
in the burst
16M
/
/
16M
8
40
≥ When recording with the self-timer, the recording ends when the
maximum number of pictures in the burst is reached.
≥ When burst recording, the following functions are disabled and cannot
be used.
j[FLASH]
j
[HDR Backlight Comp.] in [SCENE MODE]
j[CREATIVE CONTROL]
j[PANORAMA]
≥ The following functions cannot be used with burst recording.
j[E.I.S.(PICTURE)]
j[FACE FRAMING]
≥ With burst recording, the shutter speed is faster than 1/30.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 58 -
Advanced (Recording)
Recording panorama still pictures
By recording while panning the unit vertically or horizontally you can
record a 180e or 360e panorama still picture.
≥ Set to Recording Mode. (l 22)
1 Select the menu.
2
[MENU]:
[
# [PANORAMA] #
(360e PANORAMA)] or [
(180e PANORAMA)]
≥ A white cross is displayed on the LCD monitor.
2 Press the
button to start the recording.
≥ A red cross is displayed at the center of
the LCD monitor.
3 Pan the unit horizontally or vertically.
(Example) When
panning horizontally
≥ The red cross will shift in the panning
direction. Record in such a way that the
red cross and the white cross align. (If the
red cross separates from the guide, the
panorama still picture cannot be correctly
recorded)
To stop panorama recording partway
through
A
guide
Press the
button.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 59 -
∫ Recording technique
Move the camera toward the direction of recording taking care not to
shake. (Correct recording is not possible when the shake is too big)
∫ About size of still pictures
The sizes of panorama still pictures are as follows.
Picture size
Horizontal
panorama still
picture
Vertical
panorama still
picture
Panorama setting
(360e PANORAMA)
14400k720
1280k14400
(180e PANORAMA)
7200k720
1280k7200
≥ During panorama still picture recording, the zoom function is disabled.
≥ If you record a motion picture with [PANORAMA] set to (360e
PANORAMA) or (180e PANORAMA), zoom operations are
available during recording but zoom will be automatically canceled
when you stop.
≥ The panorama still picture that will be recorded will be narrower than
what is displayed in the recording screen.
≥ Panorama still pictures are indicated by
or
in the 1-file or 8-
file thumbnail display.
≥ When recording panorama still pictures, the following functions are
disabled and cannot be used.
j[FLASH], [SCENE MODE], [CREATIVE CONTROL], [BURST] and
[SELF TIMER]
≥ The following function does not work with recording panorama still
pictures.
j[E.I.S.(PICTURE)]
≥ When recording panorama still pictures, [FOCUS] is set to
(AUTO).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 60 -
≥ Focus and White Balance will be fixed to the optimal values for the still
picture for first frame. Therefore, if focus, brightness or a light source
changes drastically during recording, the panorama still picture as a
whole may not be recorded with optimal focus or a color tone.
≥ Since panorama still picture is composed from multiple still pictures,
there may be cases where the subject may warp or connection may
stand out.
≥ In the following cases, it may not be possible to record correctly.
jWhen the swing speed is too fast or too slow
jWhen recording the subject that have monotone colors or patterns
repeating (such as sky, sandy beach, etc.).
jWhen recording moving subjects (such as people, pets, automobile,
wave, flowers swaying in the wind, etc.)
jWhen recording in a dark place
jWhen recording in places with flickering light source such as
fluorescent lamp, candle, etc.
jWhen recording the unit held away from your body (axis of rotation)
≥ The recorded panorama picture will not be saved when the recording is
terminated before reaching the half of the set angle. Even if the
recording exceeds the halfway point, black strip will be recorded in the
area that was not recorded when the recording is terminated before
reaching the set angle.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 61 -
Advanced (Recording)
Recording functions of menus
≥ Set to Recording Mode. (l 22)
RECORDING MENU 1
1
[REC MODE]
You can switch between motion picture recording and audio recording,
and switch the image quality of the motion picture to record.
[MENU]:
# [REC MODE] # desired setting
1
*1
:
Records with 1920k1080 pixels. (60i)
Records with 1920k1080 pixels. (30p)
Records with 1280k720 pixels. (60p)
Records with 1280k720 pixels. (30p)
Records with 960k540 pixels. (30p)
Records with 640k480 pixels. (30p)
Records audio. (VOICE RECORD)
*2
:
:
:
*3
:
:
:
*1
*2
*3
is a format suitable for playback on a high-definition TV.
is a format suitable for playback on a PC.
is a format suitable for Mac (iMovie’11). It is recommended
when using a Mac.
≥ Recordable time using the battery (l 14)
≥ Recordable time for SD cards and built-in memory (l 159)
≥ This function’s default setting is
mode.
≥ Using [CREATIVE CONTROL] allows recording video with various
types of filter effects added. (l 64)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 62 -
≥ When the unit is moved a lot or moved quickly, or when a fast-moving
subject is recorded (particularly when recording in
mosaic-type noise may appear at playback.
mode),
[PICTURE SIZE]
The higher the number of pixels, the higher the clarity of the picture when
printing.
[MENU]:
# [PICTURE SIZE] # desired setting
1
Picture size
4608k3456
4352k3264
3072k2304
2048k1536
640k480
Aspect ratio
4:3
4:3
4:3
4:3
4:3
4352k2448
3744k2106
2560k1440
1920k1080
16:9
16:9
16:9
16:9
Download from Www.Somanuals.com. All Manuals Search And Download.
- 63 -
[CREATIVE CONTROL]
You can add various types of filter effects when recording motion pictures
and still pictures.
[MENU]:
# [CREATIVE CONTROL] # desired setting
1
(OFF):
Cancel the setting.
MINI
(Miniature Effect (MINI)):
Record motion pictures with miniature effects as if recording a
miniature model.
1CLR
(One Point Color (1CLR)):
Record in black and white while keeping one selected color. (l 65)
OLD
(Old Movie (OLD)):
Record motion pictures with a retro feel.
*1
INTV
(Time Lapse Rec (INTV))
:
Record long, slow moving scenes by skipping certain intervals to
create a short time-lapse video. (l 65)
*1
(Ghost Effect (GHOST))
:
Record people and objects by leaving a faint ghost-like trail after them.
FISH
(Fish-eye Effect (FISH)):
Record motion pictures as if recorded through a fish-eye lens.
*2
HDRP
(HDR Paint (HDRP))
:
Record still pictures with picture effects.
SKIN
(Soft Skin (SKIN)):
Record with skin softening effects.
B/W
(Monochrome (B/W)):
Record in monochrome.
SEPIA
(Sepia (SEPIA)):
Record with colors adjusted to sepia.
VIVID
(Vivid (VIVID)):
Record with reduced sharpness and increased color.
SOFT (Soft (SOFT)):
Record with reduced sharpness for a softer image.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 64 -
*1 Mode for motion picture recording only
*2 Mode for still picture recording only
∫ One Point Color
Select the color to leave with SET button, and press SET
button.
∫ Time Lapse Rec
[1 min]/[2 min]) with SET button, and press SET button.
≥
(1 sec) /
(10 sec) /
(30 sec) /
(1 min) /
(2 min) will
INTV
INTV
INTV
INTV
INTV
appear on the LCD monitor.
≥ 1 frame will be recorded every set recording intervals, and 10 frames
will makeup motion picture of 1 second.
Setup time
(recording
interval)
Setup
example
Recording
time
Recorded time
Sunset
1 sec
Approx. 1 h
Approx. 3 h
Approx. 6 min
Approx. 36 s
30 sec
Blooming
≥ Maximum recordable time is 12 hours.
≥
When [CREATIVE CONTROL] is set, the [SCENE MODE] (
l
66),
[BURST] ( 57) and [PANORAMA] ( 59) functions are set to
l
l
(OFF).
≥ (Miniature Effect (MINI))
jAudio is not recorded.
j[E.I.S.(VIDEO)] and [FACE FRAMING] are disabled.
jTo make the Miniature Effect more noticeable, it is recommended
use a tripod to record subjects that include far scenery, or subjects
that have depth or are tilted, without using the zoom.
jMaximum recordable time is 12 hours.
jRecorded motion picture will look like time-lapsed.
≥ (One Point Color (1CLR))
jA color that is not set may stay depending on the subject.
≥ (Old Movie (OLD))
jBlack vertical line is not recorded during the still picture recording
(except for still picture recording while recording motion picture).
j[DIGITAL ZOOM] and [i.ZOOM] cannot be used.
j[FACE FRAMING] is disabled.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 65 -
≥ (Time Lapse Rec (INTV))
jAudio is not recorded.
jMinimum motion picture recording time is 1 second.
j[REC MODE] will be
.
j[E.I.S.(VIDEO)] is disabled.
jColor balance and focus may not be adjusted automatically
depending on light sources or scenes. If so, manually adjust these
settings. (l 81, 83)
≥ (Ghost Effect (GHOST))
jThis will not work during the still picture recording (except for still
picture recording while recording motion picture).
j[E.I.S.(VIDEO)] is disabled.
effect will be recorded.
≥ (Fish-eye Effect (FISH))
j[E.I.S.(VIDEO)] and [FACE FRAMING] are disabled.
≥ (HDR Paint (HDRP))
jWe recommend use of a tripod.
jThe flash is disabled.
j
will be used when [PICTURE SIZE] is set to
.
j[BURST] and [PANORAMA] are set to (OFF).
j[E.I.S.(PICTURE)] is set to
j[METERING MODE] is set to
j[ISO] is set to AUTO.
(OFF).
(MULTI).
jThe field of view of the recorded still picture is smaller than the range
visible on the recording screen.
[INTELLIGENT AUTO]
Please refer to page 36.
[SCENE MODE]
When you record images in different situations, this mode automatically
sets optimum shutter speeds and apertures.
[MENU]:
# [SCENE MODE] # desired setting
1
(OFF):
Cancel the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 66 -
5 (SPORTS):
To make fast moving scenes less shaky with slow playback and pause
of playback.
(PORTRAIT):
To make people stand out against the background.
(SPOT LIGHT):
Improved quality when subject is brightly illuminated.
(SNOW):
Improved image quality when shooting in snowy locations.
(BEACH):
To make blue in the sea or sky vibrant.
(SUNSET):
To make red in the sunrise or sunset vibrant.
(FIREWORKS):
To capture the fireworks in the night sky beautifully.
(LANDSCAPE):
For spatial scenery.
(NIGHT SCENERY):
To capture the evening or night scenery beautifully.
(NIGHT PORTRAIT):
To capture a person and the background brightly.
(HDR Backlight Comp.)*:
Provides definition in regions that would otherwise be black or white.
(LOW LIGHT):
For dark scenes, such as at dusk.
* Mode for still picture recording only. This will not operate during the
motion picture recording.
≥ (SUNSET/FIREWORKS/LANDSCAPE/NIGHT SCENERY/NIGHT
PORTRAIT)
jImage may get blurry when close object is recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 67 -
≥ (FIREWORKS)
jThe shutter speed is 1/30. (Motion picture recording)
jImage may get washed out when recorded in bright surrounding.
j
(the camera shake icon) is displayed constantly when recording
still pictures, but this does not indicate a fault.
≥ (NIGHT SCENERY/NIGHT PORTRAIT/HDR Backlight Comp.)
jUsing a tripod is recommended.
≥ (LOW LIGHT)
jThe shutter speed is 1/15 or more. (Motion picture recording)
≥ (HDR Backlight Comp.)
jWhen recording a moving subject, a ghost image may appear.
jThe field of view of the recorded still picture is smaller than the range
displayed on the recording screen.
∫ Limitations of Scene Mode settings
Setting
(SPORTS)
(PORTRAIT)
(SPOT LIGHT)
(SNOW)
Limitations
PANORAMA: Fixed to
CREATIVE CONTROL: Fixed to OFF.
FOCUS: Fixed to
(OFF).
.
(BEACH)
PANORAMA: Fixed to
CREATIVE CONTROL: Fixed to OFF.
FOCUS: Fixed to
WHITE BALANCE: Fixed to
PANORAMA: Fixed to (OFF).
CREATIVE CONTROL: Fixed to OFF.
(OFF).
(SUNSET)
.
.
(FIREWORKS)
FOCUS: Fixed to
FLASH: Fixed to
.
.
ISO: Fixed to AUTO.
FACE FRAMING: Fixed to
EXP COMPENSATION: Fixed to ± 0.
WHITE BALANCE: Fixed to
PANORAMA: Fixed to (OFF).
CREATIVE CONTROL: Fixed to OFF.
FOCUS: Fixed to
FACE FRAMING: Fixed to
(OFF).
.
(LANDSCAPE)
.
(OFF).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 68 -
Setting
Limitations
PANORAMA: Fixed to
CREATIVE CONTROL: Fixed to OFF.
(NIGHT SCENERY)
(OFF).
FOCUS: Fixed to
FLASH: Fixed to
.
.
FACE FRAMING: Fixed to
(OFF).
(OFF).
(NIGHT PORTRAIT)
(HDR Backlight
PANORAMA: Fixed to
CREATIVE CONTROL: Fixed to OFF.
FOCUS: Fixed to
.
BURST: Fixed to
(OFF).
Comp.)
PANORAMA: Fixed to
(OFF).
FOCUS: Fixed to
FLASH: Fixed to
.
.
E.I.S.(PICTURE): Fixed to
METERING MODE: Fixed to
ISO: Fixed to AUTO.
.
.
PICTURE SIZE:
setting is disabled.
(
setting is changed to setting)
(LOW LIGHT)
PANORAMA: Fixed to
(OFF).
CREATIVE CONTROL: Fixed to OFF.
FOCUS: Fixed to
FLASH: Fixed to
.
.
ISO: Fixed to AUTO.
[ZOOM MODE]
Please refer to page 54.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 69 -
RECORDING MENU 2
2
[BURST]
Please refer to page 57.
[PANORAMA]
Please refer to page 59.
[FLASH]
When the
button is pressed, the flash is activated and the still
picture will be recorded. Use the built-in flash in order to record still
pictures in dark places.
[MENU]:
ßA (AUTO):
ß (ON):
# [FLASH] # desired setting
2
The unit determines the brightness of the subject
and emits a flash if necessary.
The unit emits a flash irrespective of the brightness
of the subject.
(OFF):
Cancel the setting.
≥ When [FLASH] is set to ßA (AUTO) or ß (ON), [BURST] and
[PANORAMA] are set to (OFF).
≥ [SCENE MODE] will be set to (OFF) when the [FLASH] is set to ßA
(AUTO) or ß (ON) while the [SCENE MODE] (l 66) is set to
(FIREWORKS), (NIGHT SCENERY), (HDR Backlight
Comp.), or (LOW LIGHT).
≥ If you register a shortcut function (l 77) to the SET button, you can
change the flash setting from the recording screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 70 -
[SELF TIMER]
The timer can be used to record images or audio.
[MENU]:
# [SELF TIMER] # desired setting
2
(OFF):
Cancel the setting.
Ø2 (2 sec):
Ø10 (10 sec):
Records after 2 seconds.
Records after 10 seconds.
When Ø2 (2 sec) is selected
When you press the
button or the recording start/stop button, the
status indicator flashes red for approximately 2 seconds, then recording
begins.
On the LCD monitor, an indication of (
to notify you of the recording timing.
#
) appears
When Ø10 (10 sec) is selected
When you press the
button or the recording start/stop button, the
status indicator flashes red for approximately 10 seconds, then recording
begins.
On the LCD monitor, an indication of (
#
#
#
#
) appears to notify you of the
recording timing.
≥ After the recording, the self-timer setting is canceled.
To stop the timer midway through
Press the
button or the recording start/stop button.
≥ Setting the self-timer to Ø2 or Ø10 is a good way to prevent image
shake when the button is pressed while using a tripod etc.
≥ If you register a shortcut function (l 77) to the SET button, you can
change the self-timer setting from the recording screen.
≥ If you set [FOCUS] (l 83) to
(AUTO) or
(MACRO) when
recording still pictures, the unit will focus automatically immediately
before recording.
≥ With motion picture recording/audio recording, recording does not turn
off automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 71 -
≥ If you perform any of the following cases, the self-timer will be
canceled.
jIf you turn the unit off
jIf you change to the Playback Mode
jIf you send unit into Standby Mode
[PHOTO VIEW]
Selects the desired field of view (photo view or video view) for the
recording standby screen display. When photo view is selected, a frame
to show the field of view during video recording appears.
[MENU]:
# [PHOTO VIEW] # desired setting
2
(ON): Photo view
(OFF): Video view
A
Video recording area
≥ If you register a shortcut function (l 77) to the SET button, you can
change the photo view setting from the recording screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 72 -
[AUTO REVIEW]
monitor after the
button is pressed.
[MENU]:
2
(1 sec):
Still pictures are displayed for approximately
1 second after being recorded.
1
2
(2 sec):
(OFF):
Still pictures are displayed for approximately
2 seconds after being recorded.
Still pictures are not displayed after being recorded.
RECORDING MENU 3
3
[E.I.S.(VIDEO)]
Please refer to page 55.
[E.I.S.(PICTURE)]
Please refer to page 56.
[WHITE BALANCE]
Please refer to page 81.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 73 -
[ISO]
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a
higher number enables pictures to be taken even in dark places without
the resulting pictures coming out dark.
[MENU]:
# [ISO] # desired setting
3
AUTO:
ISO sensitivity will be adjusted automatically to suit the brightness.
50/100/200/400/800/1600:
Fixes the value to each ISO sensitivity.
≥ The displayed ISO display value is the standard output sensitivity.
≥ The higher the ISO sensitivity, the greater the capability of the unit to
record with fast shutter speeds and in dark environments. However, a
higher sensitivity may also mean more noise in the recorded image
and a more grainy image.
≥ [SCENE MODE] will be set to
than AUTO while the [SCENE MODE] (l 66) is set to
(FIREWORKS), (HDR Backlight Comp.), or
LIGHT).
(OFF) when the [ISO] is set to other
(LOW
≥ If you register a shortcut function (l 77) to the SET button, you can
change the ISO sensitivity setting from the recording screen.
[FOCUS]
Please refer to page 83.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 74 -
[FOCUS MODE]
You can select the focusing method according to the position of the
subject.
[MENU]:
# [FOCUS MODE] # desired setting
3
(9-PT AUTOFOCUS):
(SPOT FOCUS):
The unit determines the focus
automatically from 9 focus points (
in the recording range.
)
The unit focuses on the subject over the
focus mark ( ) displayed at the
center of the LCD monitor.
RECORDING MENU 4
4
[METERING MODE]
You can change the light-metering method used to measure brightness.
[MENU]:
4
(MULTI):
The unit automatically assesses the
distribution of brightness over the
screen and meters to ensure that the
exposure is appropriate.
(CENTER):
The unit averages light measurements over
the entire screen, giving higher weight to the
subject at the center of the screen.
(SPOT):
The unit meters the subject over spot
meter target (
) displayed at the
center of the LCD monitor.
≥ [SCENE MODE] will be set to
(OFF) when the [METERING MODE]
(SPOT) while the [SCENE MODE]
is set to
(CENTER) or
(l 66) is set to
(HDR Backlight Comp.).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 75 -
[FACE FRAMING]
The camera automatically detects the person’s face.
[MENU]:
# [FACE FRAMING] # [
(ON)]
4
∫ About prioritized face framing
The prioritized face frame is displayed in
yellow. When the unit is set to Portrait Mode
in Intelligent Auto Mode, the unit will focus
on the prioritized face frame and adjust the
brightness accordingly.
≥ The gray frames are for face detection only.
≥ When you press the
the unit focuses on the prioritized frame. When focus is achieved, the
prioritized frame turns green.
≥ A maximum of 15 frames are detected, with the frames near the center
of the screen and large frames being prioritized.
≥ For still pictures with detected faces,
thumbnail display. (l 41)
≥ If the subject is small or dark on the LCD monitor, the unit may not be
able to detect it.
≥ [SCENE MODE] will be automatically set to
(OFF) when the [FACE
(ON) while the [SCENE MODE] (l 66) is set to
(LANDSCAPE), or (NIGHT SCENERY).
(9-PT AUTOFOCUS) and
(MULTI).
FRAMING] is set to
(FIREWORKS),
≥ [FOCUS MODE] (l 75) is set to
[METERING MODE] (l 75) is set to
≥ In the following cases, [FACE FRAMING] does not work.
jDuring burst recording (l 57)
jDuring panorama still picture recording (l 59)
jWhen [CREATIVE CONTROL] (l 64) is set to
MINI
(Miniature Effect
OLD
FISH
(MINI)),
(Old Movie (OLD)), or
(Fish-eye Effect (FISH))
(MANUAL), Auto Focus is
≥ When [FOCUS] (l 83) is set to
disabled.
≥ When it is set to [ISO] (l 74) or [EXP COMPENSATION] (l 80),
brightness may not be able to be adjusted.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 76 -
[WIND CUT]
This is for reducing the wind noise coming into the built-in microphones.
[MENU]:
# [WIND CUT] # [
(ON)]
4
≥ This function’s default setting is [
(ON)].
≥ You may not see the full effect depending on the recording conditions.
[SHORTCUTS]
This setting registers the functions (shortcut functions) performed when
the SET button is tilted up, down, left and right with the recording screen
displayed.
[MENU]:
# [SHORTCUTS]
4
1
Select the destination (up, down, left or right on the SET button)
for the function using the SET button and press the SET button.
/
/
/
:
Functions are registered individually to up, down, left and right of the
SET button.
RECOMMENDED SETTINGS:
Regular functions are automatically registered.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 77 -
2
Select the function to register using the SET button, and press
the SET button.
(AF LOCK):
Locks the focus. (l 79)
(AE LOCK):
Locks the exposure. (l 79)
(FOCUS):
Sets the focus. (l 83)
(Can be registered to
and
only)
(FLASH):
Sets the flash operation. (l 70)
(EXP COMPENSATION):
Corrects the exposure. (l 80)
ISO
(ISO):
Sets the ISO sensitivity. (l 74)
Ø(SELF TIMER):
Sets the self-timer. (l 71)
(PHOTO VIEW):
Sets photo view. (l 72)
[OFF]:
Shortcut functions are not registered.
≥ To continue and register other functions, repeat Steps 1 and 2.
Press the MENU button.
3
≥ A confirmation screen for the shortcut
settings appears.
4
5
Press the MENU button to complete
the settings.
Tilt the SET button in the direction in
which you registered the function.
≥ Each tip of the SET button changes the registered function setting.
≥ To confirm the shortcut settings, press the MENU button on the screen
in Step 1. A confirmation screen appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 78 -
∫ AF lock
If you register AF lock as a shortcut function (l 77), you can record with
the focus locked.
≥ Register the shortcut function. (l 77)
Tilt the SET button in the direction to which you registered AF lock.
≥
will appear on the LCD monitor.
≥ When [FOCUS] is set to (MANUAL), AF Lock is disabled.
≥ The AF lock setting is canceled if any of the following operations are
performed.
jIf the SET button is tilted in the direction used to register AF lock
jSetting Playback Mode
jIf [SCENE MODE] is set to
(FIREWORKS)
jIf the [FOCUS] setting is changed
jTurning off the unit
jSetting Standby Mode
∫ AE lock
If you register AE lock as a shortcut function (l 77), you can record with
the exposure locked.
≥ Register the shortcut function. (l 77)
Tilt the SET button in the direction to which you registered AE lock.
≥
will appear on the LCD monitor.
≥ The AE lock setting is canceled if any of the following operations are
performed.
jIf the SET button is tilted in the direction used to register AE lock
jSetting Playback Mode
jIf the [SCENE MODE] setting is changed
jIf [CREATIVE CONTROL] is set to
(HDR Paint (HDRP))
HDRP
jIf the [ISO] setting is changed
jIf the [WHITE BALANCE] setting is changed
jIf the [EXP COMPENSATION] setting is changed
jTurning off the unit
jSetting Standby Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
- 79 -
∫ Exposure compensation
If you register exposure compensation as a shortcut function (l 77), you
can record with altered brightness.
≥ Register the shortcut function (l 77)
1
Tilt the SET button in the direction to which you registered the
exposure compensation.
≥ The exposure compensation bar is displayed.
2
Tilt the SET button to the left or right to correct the exposure.
+
-
0
≥ The exposure compensation value is displayed to the left side of the
exposure compensation bar.
≥ The exposure compensation value can be corrected in the range –1.8
to +1.8.
≥ The exposure compensation bar disappears when the SET button is
pressed.
≥ The exposure setting is canceled if any of the following operations are
performed.
jSetting the pointer to n 0
jSetting Playback Mode
jChanging the [SCENE MODE] settings
jTurning off the unit
jSetting Standby Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
- 80 -
Advanced (Recording)
Manual recording
White Balance
Automatic White Balance function may not reproduce natural colors
depending on the scenes or lighting conditions. If so, you can adjust the
White Balance manually.
1 Select the menu.
[MENU]:
# [WHITE BALANCE]
3
2 Select the White Balance using the SET button, and
press the SET button.
(AUTO):
The unit adjusts the White Balance
automatically.
(SUNNY):
Outdoors under a clear sky
Outdoors under cloudy sky
(CLOUDY):
(INDOOR 1):
Incandescent light, video lights like in the
studio, etc.
(INDOOR 2):
Color fluorescent lamps, sodium lamps in
gymnasiums, etc.
(WHITE SET):
≥ Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥ Lights used for wedding receptions at
hotels, stage spotlights in theaters
≥ Sunrise, sunset, etc.
≥ To return to auto setting, select
(AUTO).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 81 -
∫ To set the White Balance manually
1
2
Point the unit at a white subject that fills the screen.
Select the (WHITE SET) and press the SET button.
≥ The LCD monitor display will go dark for a moment and then return to
the recording menu. When the icon appears on the recording
menu, the White Balance has been set.
≥ When the brightness changes or the recording location changes and
the color balance is no longer correct, check whether the White
Balance setting is suitable for the light source.
≥ If you turn on the unit with the lens cap still fitted, the Automatic White
Balance will not be set correctly. Always remove the lens cap before
turning on the unit.
≥ [SCENE MODE] will be set to
is set to other than (AUTO) while the [SCENE MODE] (l 66) is set
to (BEACH), (SUNSET), or (FIREWORKS).
(OFF) when the [WHITE BALANCE]
Download from Www.Somanuals.com. All Manuals Search And Download.
- 82 -
Setting the focus and recording
Set the focus in accordance with the distance to the subject.
1 Select the menu.
[MENU]:
# [FOCUS] # desired setting
3
2 Select the item to set using the SET button and press
the SET button.
(AUTO):
The focus is set automatically.
(MANUAL):
Adjusts the focus manually when it is difficult
to achieve focus automatically.
(MACRO):
Select when recording a subject from close
range.
∫ Using Manual Focus
1
Select
(MANUAL) and press the
SET button.
≥ The bar for setting the focus appears.
2
Tilt the SET button left or right to set
the focus, and press the SET button.
≥ Set the focus and return to the recording
screen.
≥ When focus is set to
(MANUAL) or
(MACRO), the
[PANORAMA] and [SCENE MODE] functions are set to
(OFF).
(MACRO), start with the zoom set to
≥ When you set the focus to
Wide (W).
≥ If you register a shortcut function (l 77) to the SET button, you can
change the focus setting from the recording screen.
≥ In certain cases, it may be difficult to achieve focus automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 83 -
Advanced (Playback)
Playback Operations
Playback using operation icon
For details on the basic playback operations, refer to page 39.
SET button/
Playback
operation
Playback
display
Operating steps
Tilt the SET button to the right
during playback for fast-forward
playback (tilt to the left for fast-
rewind playback).
During
Playback
≥ Each tip of the SET button changes
the playback speed. (Maximum 15k
normal speed)
≥ Tilt the SET button in the opposite
direction during forward winding or
rewinding to slow the winding speed.
≥ Press the SET button to restore
normal playback.
Fast
forward/
fast-
rewind
playback
Download from Www.Somanuals.com. All Manuals Search And Download.
- 84 -
SET button/
Playback
display
Playback
operation
Operating steps
With playback paused, tilt the SET
button to the right for
approximately 3 seconds (tilt to the
left for reverse slow-motion
playback)
≥ Press the SET button to restore
normal playback.
Slow-
motion
playback
During Pause
With playback paused, tilt the SET
button to the right (tilt to the left for
reverse Frame-by-Frame Playback)
≥ Reverse frame-by-frame playback
Frame-
by-Frame
Playback
will be in 1 second interval (
, and
0.5 second interval (
,
,
,
) or
).
≥ Press the SET button to restore
normal playback.
Press the SET button during the
display of the panorama still picture
≥ When playing back a horizontal
panorama still picture, the playback
scrolls from left to right.
≥ When playing back a vertical
panorama still picture, the playback
scrolls from down to up.
During stop/
during pause
Scroll
playback
≥ Pressing the SET button again to
pause the scroll playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 85 -
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still
picture. The picture size of the still picture to be created will differ
depending on the Recording Mode of the recorded motion picture.
1 Pause at the location to be saved as a still picture
during the playback.
≥ You may find it convenient to use slow motion playback and Frame-by-
Frame Playback here.
≥ Creating a still picture while [CREATIVE CONTROL] (l 93) is set
allows still pictures with filter effects added to be saved.
2 Press the
button fully.
3 Select the aspect ratio of the still picture to be saved
and press the SET button.
Aspect ratio
Recording Mode
Picture size
1920k1080
1280k720
960k540
/
/
16:9
*
*
*
*
/
/
1920k1440
1280k960
960k720
4:3
*
640k480
* White bands will be recorded at the top and bottom of still pictures.
≥ Date the motion picture was recorded will be registered as date of the
still picture.
≥ Quality will be different from the normal still picture.
≥ When creating a still picture from a recorded motion picture in
Recording Mode, [16:9] cannot be selected.
≥ The still picture is saved with a new file number.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 86 -
Cutting out a section of a panorama still
picture
You can cut out and save a section of a panorama still picture you have
recorded.
1 Display the panorama still picture.
2 Press the SET button to start scroll playback of the
panorama still picture.
3 Press the SET button to pause at the section you
wish to cut out.
4 Press the
button fully.
≥ The cut-out still picture is saved with picture size of 1280k720.
stored as the date and time of the cut-out picture.
≥ The cut-out still picture is saved with a new file number.
Zooming in on a still picture during
playback (Playback zoom)
You can zoom in on still pictures during playback.
1 Move the zoom lever to
side.
≥ You can zoom in to a maximum of 72k (7200%). (The
maximum zoom magnification differs according to the
size of the still picture)
≥ The unit zooms in on the central portion of the image.
≥ If the still picture has been recorded using face detection
(l 76), the unit zooms in on the detected face.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 87 -
≥ When you zoom in on a rotated still picture with a 4:3 or 16:9 aspect
ratio, the still picture before rotation is displayed. With a panorama still
picture, the rotated picture is displayed. (l 94)
190%
2 Shift the position of
the zoomed portion
using the SET button.
T
SET
100%
W
Zooming out from the zoomed still picture
Move the zoom lever to
side to zoom out.
Press the SET button to restore the normal display (100%) screen.
∫ Saving the zoomed still picture
Press the
button fully while zoomed in.
≥ Saving the zoomed still picture while [CREATIVE CONTROL] (l 93) is
set allows still pictures with filter effects added to be saved.
≥ The rotation information is retained for the 4:3 and 16:9 rotated still
pictures. The rotation information is not retained for the panorama still
picture, but rotated still picture is saved.
≥ In the case of still pictures recorded using face detection, the face
detection data is not retained.
≥ The more a picture is enlarged, the more its quality deteriorates.
≥ The date and time of the recording of the original still picture are stored
as the date and time of any picture stored after zooming.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 88 -
Advanced (Playback)
Various playback functions
Changing the playback settings and
playing back the slide show
≥ Set to Playback Mode. (l 22)
1 Select the file to start the slideshow with the
thumbnail screen.
≥ Move the yellow frame over the file you want to start playing back as a
slideshow.
≥ When the [CREATIVE CONTROL] (l 93) is set, it is possible to
playback the slideshow of the files with filter effect applied.
2 Select the menu.
[MENU]:
# [SLIDESHOW] # desired setting
1
3 Select the item to set using the SET button and press
the SET button.
[MODE]:
Select the type ([ALL]/[VIDEO]/[PICTURE]) of the file to play back.
*
[SLIDES INTERVAL] :
Select the display interval for still picture playback.
*
[EFFECT SETUP] :
Select the effects for still picture playback.
[MUSIC SELECT]:
Select the music for still picture playback.
[START]:
Start the slide show.
* These settings are only available when [ALL] or [PICTURE] has been
selected in [MODE].
Download from Www.Somanuals.com. All Manuals Search And Download.
- 89 -
4 (On selecting [MODE])
Select the type of file to play back using the SET
button and press the SET button.
(On selecting [SLIDES INTERVAL])
Select an item using the SET button and press the
SET button.
[SHORT]:
[NORMAL]:
[LONG]:
approx. 1 second
approx. 5 seconds
approx. 15 seconds
(On selecting [EFFECT SETUP])
Select the desired effect using the SET button and
press the SET button.
≥ [EFFECT SETUP] is disabled for the playback of panorama still
pictures.
(On selecting [MUSIC SELECT])
Select the desired music using the SET button and
press the SET button.
≥ When you are playing back scenes/audio files, the audio of the scenes/
audio files is played back without music. When playing back the
MINI
scenes with [CREATIVE CONTROL] (l 64) set to
Effect (MINI)) or
(Miniature
INTV
(Time Lapse Rec (INTV)), music selected in
[MUSIC SELECT] is played back.
5 Select [START] using the SET button and press the
SET button.
≥ Panorama still pictures are played back as follows.
jHorizontal panorama still picture: the playback scrolls from left to
right.
jVertical panorama still picture: playback scrolls from down to up.
≥ To adjust the volume during a slideshow, operate the volume lever.
(l 41)
≥ During playback, the slideshow will stop if you perform any operation
except operations on the volume lever.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 90 -
Displaying file information
You can display the information of files recorded with the unit.
≥ Set to Playback Mode. (l 22)
1 Using the SET button, select file for which to display
information.
2 Press and hold down the MENU button for 1 second
or more.
≥ To make the information disappear, press the MENU button.
1
Recording Mode
Recording format
Recording start time and date
Eye-Fi connection status
File number
Protection setting
File size
Recording time
2
3
4
5
6
7
8
Recording media
1
2
3
4
Picture size
Scene Mode
Creative control
IRIS: Aperture
SHUTTER: Shutter speed
EXPOSE: Exposure correction
ISO: ISO sensitivity
Recording date and time
Eye-Fi connection status
File number
Protection setting
File size
Recording media
5
6
7
8
9
:
Download from Www.Somanuals.com. All Manuals Search And Download.
- 91 -
1
Recording Mode
Recording format
Recording start time and date
Eye-Fi connection status
File number
Protection setting
File size
Recording time
2
3
4
5
6
7
8
Recording media
Download from Www.Somanuals.com. All Manuals Search And Download.
- 92 -
Advanced (Playback)
Using the playback menu
≥ Set to Playback Mode. (l 22)
PLAYBACK MENU 1
1
[SLIDESHOW]
Please refer to page 89.
[CREATIVE CONTROL]
You can add various types of filter effects when recording motion pictures
and still pictures and play them back.
1
2
Select the file to add the filter effects with the thumbnail screen.
Select the menu.
[MENU]:
# [CREATIVE CONTROL] # desired setting
1
(OFF):
Cancel the setting.
1CLR
(One Point Color (1CLR)):
Playback in black and white while keeping one selected color. (l 65)
OLD
(Old Movie (OLD)):
Playback motion pictures with a retro feel.
*
FISH
(Fish-eye Effect (FISH)) :
Playback motion pictures as if recorded through a fish-eye lens.
SKIN
(Soft Skin (SKIN)):
Playback with skin softening effects.
B/W
(Monochrome (B/W)):
Playback in monochrome.
SEPIA
(Sepia (SEPIA)):
Playback with colors adjusted to sepia.
VIVID
(Vivid (VIVID)):
Playback with reduced sharpness and increased color.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 93 -
SOFT
(Soft (SOFT)):
Playback with reduced sharpness for a softer image.
* Disabled during panorama playback of still pictures.
1CLR
3
(when
(One Point Color (1CLR)) is selected only)
Tilt the SET button up and down to select the color to keep and
press the SET button.
≥ The quality of motion pictures and still pictures recorded with
[CREATIVE CONTROL] (l 64) is different.
setting.
[PLAY VOLUME]
Sets the playback volume for scene and audio files.
1
Select the menu.
[MENU]:
# [PLAY VOLUME]
1
2
Tilt the SET button right or left and press the SET button.
≥ Play volume can also be set with the volume lever. (l 41)
[PROTECT] or
[TRANSFER/PROTECT]
Please refer to page 103 for details about protection setting.
Please refer to page 136 for details about selective forwarding.
[DELETE]
Please refer to page 100.
[ROTATE]
You can rotate still pictures.
1
Select the still picture to rotate using the thumbnail screen.
≥ Move the yellow frame over the still picture you wish to rotate.
Select the menu.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
- 94 -
[MENU]:
# [ROTATE] # [RIGHT] or [LEFT]
1
≥ To rotate another still picture, tilt the SET button left and right to select
a still picture, select [RIGHT] or [LEFT], and press the SET button.
3
Press the MENU button to complete the settings.
≥ The still picture cannot be rotated if it has been protected. Turn off the
protection before the rotation operation. (l 103)
PLAYBACK MENU 2
2
[RESIZE]
You can reduce the size of the still picture and save as a new still picture.
1
Select the still picture to resize using the thumbnail screen.
≥ Move the yellow frame over the still picture you wish to resize.
Select the menu.
2
[MENU]:
# [RESIZE] # desired setting
2
Size of original image Resize setting
Size after resizing
1600k1200
640k480
/
/
/
/
/
/
*
1920k1080
1280k720
0.9M
* Cannot be selected when the size of the original image is
.
≥ The resized still picture is saved with a new file number.
≥ Still picture with picture size of
and panorama still picture cannot
be resized.
[RED-EYE CORRECT.]
Corrects eye color when they appear red in still pictures (red-eye
phenomenon).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 95 -
1
Select the still picture to undergo red-eye correction using the
thumbnail screen.
≥ Move the yellow frame over the still picture which is to undergo red-eye
correction.
2
Select the menu.
[MENU]: # [RED-EYE CORRECT.] # [CORRECTION]
2
≥ A correction confirmation screen appears. Check the correction
location, which is surrounded by a red frame, and press the SET
button.
3
Select the saving method and press the SET button.
[SAVE AS NEW]:
The corrected still picture is saved as a new still
picture.
[OVERWRITE]:
The original still picture is deleted and only the
corrected still picture is saved.
≥ Red-eye cannot be corrected in panorama still pictures or still pictures
HDRP
recorded with [CREATIVE CONTROL] set to
(HDR Paint (HDRP)).
≥ Because the unit automatically corrects the portion it recognizes as
requiring correction, it may not always make the correction correctly.
[EDIT VIDEO]
You can cut unwanted sections from scenes. (Scene splitting) You can
also splice multiple scenes together. (Scene splicing)
∫ Splitting a scene
1
Select the scene to split using the thumbnail screen.
≥ Move the yellow frame over the scene you wish to split.
Select the menu.
2
[MENU]:
# [EDIT VIDEO] # [
(SPLIT)]
2
Download from Www.Somanuals.com. All Manuals Search And Download.
- 96 -
3
Specify the starting position for the
scene.
≥ Play back to near the position where you
wish the scene to start, then pause
playback and specify the starting position
precisely using Frame-by-Frame
Playback. The pause position will be the starting position of the scene.
≥ If you wish the split scene to start from the beginning of the scene, go
to Step 4.
Operations
Play back
With the unit paused, tilt the SET button to the
right for approximately 2 seconds to play back
normally, and to the left to play back in the
reverse direction.
Pause
During playback, press the SET button.
Fast forward/
fast-rewind
During playback, you can change the playback
speed by tilting the SET button right or left.
Frame-by-frame
With the unit paused, tilt the SET button to the
right to advance frame-by-frame, and to the left
to reverse frame-by-frame.
4
Tilt the SET button up.
≥ The screen for specifying the end position of the scene appears.
Specify the end position for the scene.
5
≥ Set the end position by performing the same operations as when
setting the start position.
≥ The portions displayed in green are saved.
≥ If you wish to splice a preceding section to
a subsequent section, tilt the SET button
down. Each downward tilt of the SET
button changes the section to be deleted.
6
Press the
button or the
recording start/stop button.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 97 -
7
Select a saving method using the SET button and press the SET
button.
[SAVE AS NEW]:
[OVERWRITE]:
The split scene is saved as a new scene.
The original scene is deleted and only the split
scene is saved.
[REVIEW CLIP]:
The scene is played back in the split state.
∫ Scene splicing
1
Select the scene with the thumbnail screen.
≥ Move the yellow frame over the scene.
2
Select the menu.
[MENU]: # [EDIT VIDEO] # [
(SPLICE)]
2
3
Move the yellow frame over the scenes you wish to splice and
press the SET button.
≥ Scenes recorded using different Recording
Modes cannot be spliced.
1
2
≥ Scenes recorded with [REC MODE]
(l 62) set to
and scenes recorded
with [CREATIVE CONTROL] (l 64) set to
INTV
[Time Lapse Rec (INTV)] cannot be
spliced.
≥ The scenes you select for splicing are assigned numbers.
≥ The recording date of spliced scenes will be registered from the date of
the scene that is selected first (the scene with
displayed).
≥ You can continue selecting up to maximum of 9 scenes.
≥ The scenes are spliced in numerical order according to the assigned
numbers.
≥ To cancel a selection, press the SET button again.
4
Press the
button or the recording start/stop button.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 98 -
5
Select a saving method using the SET button and press the SET
button.
[SAVE AS NEW]:
[OVERWRITE]:
The spliced scenes are saved as a new scene.
The spliced scene is saved by writing over the
file you initially selected.
[REVIEW CLIP]:
The scene resulting from the splicing is played
back.
≥ Do not turn off the unit during motion picture editing process. If the unit
is turned off, there is a risk that the edited files and original files will be
lost.
≥ If the total size of the file exceeds 4 GB, you cannot splice.
≥ If the original scene is protected, you cannot overwrite it when saving.
≥ Audio files cannot be split or spliced.
≥ To adjust the volume during a playback review, operate the volume
lever. (l 41)
≥ When editing long motion pictures, the processing will take longer due
to the time it takes to process large files. When editing scenes on the
unit, make sure that the battery does not run out during the processing
by using a battery with sufficient charge on it or the AC adaptor.
≥ For editing long scenes, we recommend using a PC (HD Writer VE
3.0).
≥ It may not be possible to split short scenes.
≥ The actual splitting point may differ slightly from the specified position.
[COPY]
Please refer to page 111.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 99 -
Advanced (Playback)
Deleting files/folders
When an SD card is inserted, the files and folders on the SD card are
deleted. When not inserted, the files and folders in the built-in memory
are deleted.
Deleted files and folders cannot be restored, so perform
appropriate confirmation of the contents before proceeding with
deletion.
Deleting displayed file
≥ Set to Playback Mode. (l 22)
≥ Switch from thumbnail display to 1-file display. (l 41)
1 Select the file to delete using the SET button.
2 Tilt the SET button up.
3 Select [DELETE] using the SET button and press the
SET button.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 100 -
Deleting multiple files at once
≥ Set to Playback Mode. (l 22)
1 Select the menu.
[MENU]:
# [DELETE]
1
2 Using the SET button, select [DELETE SELECTED],
[DELETE ALL] or [DELETE FOLDER] and press the
SET button.
∫ Deleting selected files
3 (When [DELETE SELECTED] is selected in Step 2)
Select the file to delete using the SET button and
press the SET button.
≥
will appear on the selected file. To cancel, press the SET button
again.
≥ You can continue selecting up to maximum of 100 files.
4 Press the
button or the recording start/stop
button.
≥ A delete confirmation screen appears.
5 Select [YES] using the SET button and press the SET
button.
≥ The selected files are deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 101 -
∫ Deleting all files
3 (When [DELETE ALL] is selected in Step 2)
Select [DELETE] using the SET button and press the
SET button.
≥ A delete confirmation screen appears.
4 Select [YES] using the SET button and press the SET
button.
≥ All the files will be deleted.
∫ Deleting a folder
3 (When [DELETE FOLDER] is selected in Step 2)
Select the folder to delete using the SET button and
press the SET button.
≥ A delete confirmation screen appears.
4 Select [YES] using the SET button and press the SET
button.
≥ A further confirmation screen appears. Select [YES] and press the SET
button to delete the folder.
≥ Files which cannot be played back (the thumbnails are displayed as
) cannot be deleted.
≥ The deletion may take time if there are many files.
≥ If you delete scenes recorded on other products or still pictures
conforming to DCF standard with this unit, all the data related to the
scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are
deleted, a still picture (other than JPEG) that cannot be played back on
this unit may be erased.
≥ Files which are protected cannot be deleted. To delete a protected file,
first remove the protection and then delete. (l 103)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 102 -
Protecting a file
Files can be protected so that they are not deleted by mistake. (Even if
you protect some files, formatting the media will delete them.)
≥ Set to Playback Mode. (l 22)
1 Select the menu.
*
[MENU]:
# [PROTECT]
1
* When you are using an Eye-Fi card which has already been set to
selective forwarding with a PC, [TRANSFER/PROTECT] is displayed.
2 Select the file you wish to protect using the SET
button and press the SET button.
≥
appears. To cancel the selection, press the SET button again.
3 Press the MENU button to complete the settings.
≥ Files set as protected will be displayed with
for the thumbnail of 1
file. (l 41)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 103 -
Advanced (Playback)
Watching Video/Pictures on your
TV
Confirm the terminals on your TV and use a cable compatible
with the terminals. Image quality may vary with the connected
terminals.
A
1
High quality
HDMI
terminal
Video
2
terminal
≥ Always use the supplied AV cable.
≥ HDMI is the interface for digital devices. If you connect this unit to a
HDMI compatible high definition TV and then play back the recorded
high-definition images, you can enjoy them in high resolution with high
quality sound.
≥ Turn down the volume before connecting.
1 Connect this unit to a TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 104 -
B
HDMI mini cable (optional)
≥ Be sure to connect to the HDMI terminal.
AV cable (supplied)
Picture quality
C
3
4
High-definition images when connecting to HDMI terminal
Standard images when connecting to video terminal
Cables
Reference items
B
HDMI mini cable
(optional)
≥ Connecting with an HDMI mini cable
(l 108)
≥ Playback using VIERA Link™ (l 109)
About the status indicator of the unit
≥ While the unit is connected to a television, the status indicator lights
up in orange.
≥ While the unit is accessing the SD card or the built-in memory, the
status indicator illuminates in red. During access, do not disconnect
the HDMI mini cable or remove the battery.
≥ Check that the plugs are inserted as far as they go.
≥ Connecting the AV cable in the wrong direction may cause damage to
the USB/AV connector of the unit. If the terminal has become
damaged, it may not operate correctly, including failure to recognize
the cable even if it has been connected.
≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30: optional).
≥ Do not use any other AV cables except the supplied one.
2 Select the video input on the TV.
≥ Example:
Select the [HDMI] channel with an HDMI mini cable.
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the
TV. (For more information, please read the operating instructions for
the TV.)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 105 -
3 Play back from the unit.
≥ The volume cannot be adjusted on the unit. Please adjust the volume
on the TV.
≥ Setting the [TV SYSTEM] to [NTSC] will not display the screen of the
unit during recording standby. (l 108) Please check on the TV screen
instead.
≥ About the video output
The video output destination varies depending on the status of
the unit.
TV
SYSTEM
Recording Mode
Standby Recording
Connection Video output
Playback
Mode
cable
destination
(
l
108)
NTSC
PAL
—
≤
≤
LCD monitor
of the unit
—
≤
—
≤
AV cable
(supplied)
NTSC
PAL
≤
—
—
TV
NTSC
PAL
LCD monitor
of the unit
—
≤
HDMI mini
cable
(optional)
NTSC
PAL
TV
≤
—
≤: Output
—: No output
Download from Www.Somanuals.com. All Manuals Search And Download.
- 106 -
∫ To watch images on a regular TV (4:3) or when both
sides of the images do not appear on the screen
Change the menu setting to display the images correctly. (Check the TV
setting.)
[MENU]:
# [TV OUTPUT] # [TV ASPECT] # [4:3]
2
Example of images with a [16:9] aspect ratio on a regular TV (4:3)
[TV ASPECT] setting
[16:9]
[4:3]
≥ If a wide-screen TV is connected, adjust the aspect setting on the TV.
(Refer to the operating instructions of the TV for details.)
Refer to the following support site for information about
Panasonic TVs with an SD card slot for playing back your
pictures.
http://panasonic.net/
≥ For details on how to play back, please read the operating
instructions for the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 107 -
Connecting with an HDMI mini cable
Select the desired method of HDMI output.
[MENU]:
# [TV OUTPUT] # [HDMI] #
[AUTO]/[720p]/[1080i]/[480p]
2
≥ [AUTO] determines the output resolution automatically based on
information from the connected TV.
If the images are not output on the TV when the setting is [AUTO],
switch to the method [720p], [1080i] or [480p] which enables the
images to be displayed on your TV. (Please read the operating
instructions for the TV.)
TV format setting
Set the format of the video signal output from the USB/AV connector.
[MENU]:
# [TV OUTPUT] # [TV SYSTEM] # [NTSC] or [PAL]
2
[NTSC]:
[PAL]:
Outputs NTSC video signals.
Outputs PAL video signals.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 108 -
Advanced (Playback)
™
Playback using VIERA Link
What is the VIERA Link (HDAVI Control™)?
≥ VIERA Link™ is a new name for EZ Sync™.
≥ This function allows you to use your remote control for the
Panasonic TV for easy operations when this unit has been
connected to a VIERA Link compatible device using an HDMI mini
cable (optional) for automatic linked operations. (Not all operations
are possible.)
≥ VIERA Link is a unique Panasonic function built on an HDMI control
function using the standard HDMI CEC (Consumer Electronics
Control) specification. Linked operations with HDMI CEC compatible
devices made by other companies are not guaranteed.
When using devices made by other companies that are compatible
with VIERA Link, refer to the operating instructions for the respective
devices.
≥ This unit supports “VIERA Link Ver.5” function. “VIERA Link Ver.5” is
the standard for Panasonic’s VIERA Link compatible equipment.
This standard is compatible with Panasonic’s conventional
VIERA Link equipment.
≥ Set to Playback Mode. (l 22)
1 Select the menu.
[MENU]:
# [TV OUTPUT] # [VIERA Link] # [ON]
2
≥ If you are not using VIERA Link, set to [OFF].
2 Connect this unit to a Panasonic TV compatible with
VIERA Link using an HDMI mini cable. (l 104)
≥ It is recommended to connect this unit to an HDMI terminal other than
the HDMI1 if there are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the
operating instructions of the TV for how to set etc.)
≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15,
RP-CDHM30: optional).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 109 -
3 Operate with the remote control for the TV.
(When selecting scenes) (When playing back)
A
B
Display operation icons
Cancel operation icons
∫ Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also
turns off.
Automatic input switching:
If you connect with an HDMI mini cable and then turn on this unit, the
input channel on the TV automatically switches to this unit’s screen. If the
TV’s power is in standby status, it will turn on automatically (if [Set] has
been selected for the TV’s [Power on link] setting).
≥ Depending on the HDMI terminal on the TV, the input channel may not
switch automatically. In this case, use the remote control for the TV to
switch the input channel.
≥ If you are unsure whether or not the TV and AV amplifier you are using
are compatible with VIERA Link, read the operating instructions for the
devices.
≥ Available linked operations between this unit and a Panasonic TV is
different depending on the types of Panasonic TVs even if they are
compatible with VIERA Link. Refer to the operating instructions of the
TV for the operations that support on the TV.
≥ Operation is not possible with a cable that is not based on the HDMI
standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 110 -
Copy/Dubbing
Copying from Built-in Memory to
SD card
Files recorded using the unit can be copied from the built-in memory to
an SD card inserted into the unit.
1 Set to Playback Mode. (l 22)
≥ Be sure to use a sufficiently charged battery or the AC adaptor.
2 Select the menu.
[MENU]:
# [COPY] # desired setting
2
[COPY SELECTED]:
Copies the selected file to the SD card.
[COPY ALL]:
Copies all files recorded in the built-in memory to the SD card.
3 (On selecting [COPY SELECTED])
Select the file to copy using the SET button and
press the SET button.
≥
will appear on the selected file. To cancel, press the SET button
again.
≥ You can continue selecting up to maximum of 100 files.
≥ Press the MENU button to return to the previous step.
(On selecting [COPY ALL])
Select [COPY ALL] to begin copying to the SD card.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 111 -
4 (On selecting [COPY SELECTED])
Press the recording start/stop button or the
button.
≥ When the copying ends, the unit returns to the playback menu.
If you intend to delete the original file when the copying has
finished, always play back the copied file before deletion to
confirm that the original has been copied normally.
≥ You cannot change the order of the files that are to be copied.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 112 -
Copy/Dubbing
Dubbing images onto other video
devices
You can dub by connecting an AV cable.
≥ Be sure to use a sufficiently charged battery.
≥ Connecting the AV cable in the wrong direction may cause damage to
the USB/AV connector of the unit. If the connector has become
damaged, it may not operate correctly, including failure to recognize
the cable even if it has been connected.
≥ Images are dubbed in standard quality.
the video device and TV
that this unit is connected
to.
≥ The channel set will differ
depending on the terminal to
which the unit is connected.
≥ See the operating instructions
of the video device for details.
≥ Insert the plugs as far as they
will go.
≥ Do not use any other AV cables
except the supplied one.
A
AV cable (supplied)
≥ Set to Playback Mode. (l 22)
1 Connect the unit to the recording equipment and
begin playback on the unit.
≥ Recorded files can be dubbed while a slideshow is being played back.
(l 89)
≥ If the unit is connected to a video device using an AV cable, the screen
of the unit will not display images when in Playback Mode. Check on
the TV screen instead.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 113 -
2 Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping
recording on the recorder.
≥ Even when [DISPLAY] is set to [OFF], the battery icon will be displayed
if the battery runs low. Be sure to use a battery which has been
charged sufficiently.
≥ If the date and time display and function indication are not wanted,
cancel them before dubbing. (l 46)
If the dubbed images are played back on a wide-screen TV, the
images may be stretched vertically.
In this case, refer to the operating instruction of the device you are
connecting to or read the operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 114 -
With a PC
What you can do with a PC
HD Writer VE 3.0
You can copy the motion/still picture data to the HDD of PCs or write to
media such as Blu-ray discs, DVD discs or SD cards using HD Writer VE
3.0, which is the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer VE 3.0 (PDF file) for
details on how to use it.
≥ Scenes edited using the HD Writer VE 3.0 can be played back on the
unit. Note, however, that such scenes cannot be edited on the unit.
∫ Smart wizard
The Smart wizard screen is automatically displayed when you connect
this unit to a PC with HD Writer VE 3.0 installed. (l 125)
Copy to PC:
You can copy motion/still picture data to the HDD
of PCs.
Copy to disc:
You can copy to disc in high-definition picture
quality or conventional standard picture quality
(MPEG2 format).
≥ Select the function you wish to use and follow the on-screen
instructions for easy copying.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 115 -
Important Notice
≥ When using an SDXC Memory Card, check the following
support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
≥ When inserting a disc containing recorded motion pictures into
other devices, a message prompting you to format the disc may
be displayed. Do not format the disc, since deleted data cannot
be restored later.
Data
What can be done with the HD Writer VE 3.0
type
Copying data to a PC
Copying to a Blu-ray disc
≥ Motion pictures are converted to high-definition (H.264)
motion pictures.
Motion
picture
and still
picture
≥ Motion pictures recorded using
/
cannot be
copied.
Online sharing:
You can upload motion/still picture data on the Internet
and share them with your family and friends.
Copying in DVD-Video format:
≥ Converted to conventional standard quality (MPEG2
format).
Editing:
Editing motion picture data copied on an HDD of a PC
≥ Title, Transition, Delete partially, Dividing
≥ Converting part of motion picture into still picture
Motion
picture
Playing back on a PC:
Play back the motion picture data in high-definition picture
quality on a PC.
≥ It is possible to play back still pictures on a PC using an image viewer
standard to Windows or commercially available image browsing
software, and copy still pictures to a PC using Windows Explorer.
≥ Please refer to page 132 for details about using a Mac.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 116 -
≥ Data cannot be written to the unit from a PC.
≥ Motion pictures that have been recorded on another device
cannot be written to the software supplied with this unit.
≥ Audio files cannot be handled.
≥ When motion picture data is written to and read from the SD card,
correct operation cannot be guaranteed with software other than that
supplied with the unit.
≥ Do not start the software supplied with this unit and other software at
the same time.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 117 -
End User License Agreement
Before opening the CD-ROM package, please read the following.
You (“Licensee”) are granted a license for the Software defined in this
End User License Agreement (“Agreement”) on condition that you agree
to the terms and conditions of this Agreement.
Article 1 License
Licensee is granted the right to use the software, including the
information recorded or described on the CD-ROM, instruction manuals,
and any other media provided to Licensee (collectively “Software”), but
all applicable rights to patents, copyrights, trademarks and trade secrets
in the Software are not transferred to Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer, rent, lease, lend or allow
any third party, whether free of charge or not, to use, copy or modify the
Software, except as expressly provided for in this Agreement.
Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the Software in whole or a part
solely for back-up purpose.
Article 4 Computer
Licensee may use the Software only on one computer, and may not use it
on more than one computer. Further, Licensee may not use the Software
for commercial software hosting services.
Article 5 Reverse Engineering, Decompiling or Disassembly
Licensee may not reverse engineer, decompile, or disassemble the
Software, except to the extent either of them is permitted under law or
regulation of the country where Licensee resides. Panasonic, or its
distributors will not be responsible for any defects in the Software or
damage to Licensee caused by Licensee’s reverse engineering,
decompiling, or disassembly of the Software.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 118 -
Article 6 Indemnification
The Software is provided “AS-IS” without warranty of any kind, either
expressed or implied, including, but not limited to, warranties of
non-infringement, merchantability and/or fitness for a particular purpose.
Further, Panasonic does not warrant that the operation of the Software
will be uninterrupted or error free. Panasonic or any of its distributors will
not be liable for any damage suffered by Licensee arising from or in
connection with Licensee’s use of the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to any country the Software in
any form without the appropriate export licenses under regulations of the
country where Licensee resides, if necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will be automatically terminated
if Licensee contravenes any of the terms and conditions of this
Agreement. In this event, Licensee must destroy the Software and
related documentation together with all the copies thereof at Licensee’s
own expense.
Article 9 With regard to MICROSOFT SQL SERVER COMPACT 3.5
produced by Microsoft Corporation
(1) Licensee shall use the MICROSOFT SQL SERVER COMPACT 3.5
only when included in the Software, and shall not use the MICROSOFT
SQL SERVER COMPACT 3.5 in any other configuration or method.
Licensee shall not publish the MICROSOFT SQL SERVER COMPACT
3.5 or work around any technical limitations in the MICROSOFT SQL
SERVER COMPACT 3.5.
(2) Licensee shall not use, copy, distribute, regrant for use or otherwise
handle the Software in any way beyond the range of use granted under
Article 9 (1), and shall not conduct operations such as reverse
engineering, decompilation, disassembling, etc. of the MICROSOFT SQL
SERVER COMPACT 3.5.
(3) All rights, including copyright, patent rights etc. relating to the
MICROSOFT SQL SERVER COMPACT 3.5 shall belong to Microsoft
Corporation. Licensee shall not claim any rights related to the
MICROSOFT SQL SERVER COMPACT 3.5 whatsoever.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 119 -
With a PC
Operating environment
≥ Even if the system requirements mentioned in this owner’s manual are
fulfilled, some PCs cannot be used.
≥ A CD-ROM drive is necessary to install the supplied software
applications. (A compatible Blu-ray disc/DVD writer drive and media
are necessary for writing to a Blu-ray disc/DVD.)
≥ Operation is not guaranteed in the following cases.
jWhen 2 or more USB devices are connected to a PC, or when
devices are connected through USB hubs or by using extension
cables.
jOperation on an upgraded OS.
jOperation on an OS other than the one pre-installed.
≥ This software is not compatible with Microsoft Windows 3.1,
Windows 95, Windows 98, Windows 98SE, Windows Me, Windows NT
and Windows 2000.
∫ Operating environment for HD Writer VE 3.0
PC
OS
IBM PC/AT compatible PC
Windows 8 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) Starter/Home Basic/
Home Premium/Professional/Ultimate (SP1)
Windows Vista (32 bit) Home Basic/Home Premium/
Business/Ultimate (SP2)
Windows XP (32 bit) (SP3)
CPU
Intel Pentium 4 2.8 GHz or higher
(including compatible CPU)
≥ Intel Core 2 Duo 2.16 GHz or higher or
AMD Athlon 64 X2 Dual-Core 5200+ or higher is
recommended when using the playback function.
≥ Intel Core 2 Quad 2.6 GHz or higher is
recommended when using the editing function.
≥ Intel Core i7 2.8 GHz or higher is recommended
when copying to Blu-ray discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 120 -
RAM
Windows 8/Windows 7: 1 GB or more (32 bit)/2 GB or
more (64 bit)
Windows Vista: 1 GB or more
Windows XP: 512 MB or more (1 GB or more
recommended)
Display
High Color (16 bit) or more (32 bit or more
recommended)
Desktop resolution of 1024k768 pixels or more
(1920k1080 pixels or more recommended)
Windows 8/Windows 7/Windows Vista: DirectX 9.0c
compatible video card (DirectX 10 recommended)
Windows XP: DirectX 9.0c compatible video card
Compatible with DirectDraw overlay
PCI Express™k16 compatible recommended
Video memory of 256 MB or more recommended
Free hard
disk drive
space
Ultra DMA — 100 or higher
Available hard disk capacity of 450 MB or more for
installation
≥ When writing to DVD/Blu-ray disc/SD, at least twice
the amount of free disk space as the disc or card
being created is necessary.
Sound
Interface
Other
DirectSound Support
USB port [Hi-Speed USB (USB 2.0)]
Mouse or equivalent pointing device
requirements Internet connection
≥ Supplied CD-ROM is available for Windows only.
≥ Input is not supported in languages other than English, German,
French, Simplified Chinese and Russian.
≥ Operation cannot be guaranteed on all Blu-ray disc/DVD drives.
≥ Operation is not guaranteed on Microsoft Windows Vista Enterprise,
Windows XP Media Center Edition, Tablet PC Edition, Windows 7
Enterprise and Windows 8 Enterprise.
≥ Windows 8 will only operate as a desktop application.
≥ This software is not compatible with a multi-boot environment.
≥ This software is not compatible with a multi-monitor environment.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 121 -
≥ If using Windows XP, only an administrative account user can use this
software. If using Windows Vista/Windows 7/Windows 8, only
administrative and standard account users can use this software. (An
administrative account user should install and uninstall this software.)
∫ To use the HD Writer VE 3.0
You will need a high performance PC depending on the functions to be
used. It may not properly play back or properly operate depending on the
environment of the PC used. Refer to the operating environment and
notes.
≥ Operation during the playback may become slow if the CPU or memory
is not fulfilling the requirements of the operating environment.
≥ Always use the most current driver for the video card.
≥ Always make sure there is enough capacity on the HDD in the PC. It
may become inoperable or the operation may stop suddenly if the
capacity gets low.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 122 -
∫ Operating environment for the card reader function
(mass storage)
PC
OS
IBM PC/AT compatible PC
Windows 8 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) or SP1
Windows Vista (32 bit) (SP2)
Windows XP (32 bit) (SP3)
CPU
RAM
Windows 8/Windows 7/Windows Vista: 1 GHz or
higher
32-bit (k86) or 64-bit (k64) processor (including
compatible CPU)
Windows XP: Intel Pentium III 450 MHz or higher or
Intel Celeron 400 MHz or higher
Windows 8/Windows 7: 1 GB or more (32 bit)/2 GB or
more (64 bit)
Windows Vista Home Basic: 512 MB or more
Windows Vista Home Premium/Business/Ultimate/
Enterprise: 1 GB or more
Windows XP: 512 MB or more (1 GB or more
recommended)
Interface
USB port
Other
Mouse or equivalent pointing device
requirements
≥ The USB equipment operates with the driver installed as standard in
the OS.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 123 -
With a PC
Installation
When installing the software, log on to your computer as the
Administrator or with a user name with equivalent authorization. (If you
do not have authorization to do this, consult your manager.)
≥ Before starting the installation, close all applications that are running.
≥ Do not perform any other operations on your PC while the software is
being installed.
≥ Explanation of operations is based on Windows 7.
1 Insert the CD-ROM into the PC.
≥ The [AutoPlay] screen is displayed automatically. Click [Run setup.exe]
# [Yes].
≥ If the [AutoPlay] screen is not displayed automatically, select [Start] #
[Computer] (or double-click on [Computer] on the desktop), and then
double-click [Panasonic].
2 Click [Yes].
3 Click [Next].
≥ Operate following the instruction on the screen.
≥ Select [NTSC Area] when the country or region of your residency is not
displayed in the selection screen for the country or region.
The PC must be rebooted for the application to work.
∫ Uninstalling HD Writer VE 3.0
Follow the steps below to uninstall any software applications that you no
longer require.
1 Select [Start] # [Control Panel] # [Uninstall a
program].
2 Select [HD Writer VE 3.0], then click [Uninstall].
≥ Proceed with the uninstallation by following the on-screen instructions.
≥ After uninstalling the software, be sure to reboot the PC.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 124 -
With a PC
Connecting to a PC
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A
USB cable (supplied)
≥ Insert the plugs as far as they will go.
1 Turn on the unit.
≥ Be sure to use a sufficiently charged battery.
2 Connect this unit to a PC.
≥
Connecting the USB cable in the wrong direction may cause damage to
the USB/AV connector of the unit. If the connector has become damaged,
it may not operate correctly, including failure to recognize the cable even if
it has been connected.
≥ The USB function selection screen will appear.
3 Select the desired Connection Mode using the SET
button and press the SET button.
[CARD READER]:
[WEB CAMERA]:
The unit works as an external drive for the PC.
(Card Reader Mode) (l 126)
The unit works as a web camera. (Web Camera
Mode) (l 129)
∫ To disconnect USB cable safely
Select the
icon in task tray displayed on the PC, and then click
[Eject Panasonic Video Camera].
≥ Depending on your PC’s settings, this icon may not be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 125 -
About the status indicator of the unit
≥ While the unit is connected to a PC, the status indicator flashes in
orange.
≥ While the unit is accessing the SD card or the built-in memory, the
status indicator illuminates in red. During access, do not disconnect
the USB cable or remove the battery.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
≥ When this unit is connected to a PC using a USB cable while the unit is
≥ When performing reading/writing between a PC and an SD card, be
aware that some SD card slots built into PCs and some SD card
readers are not compatible with the SDHC Memory Card or SDXC
Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
Use as a card reader
Connect the unit to a PC and set the unit to Card Reader
Mode. (l 125)
≥ The LCD monitor will turn off.
≥ The Smart wizard screen is automatically displayed when HD Writer
VE 3.0 is installed.
≥ This unit is automatically recognized as an external drive of the PC.
(l 127)
≥ File is read from the SD card if one is inserted or the built-in memory if
no SD card is inserted.
≥ When you select an option other than [CARD READER], reconnect the
USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 126 -
∫ About the PC display
When the unit is connected to a PC, it is recognized as an external drive.
≥ Removable disk (Example:
) is displayed in
[Computer].
We recommend using HD Writer VE 3.0 to copy motion picture data.
Using Windows Explorer or other programs on the PC to copy, move
or rename files and folders recorded with this unit will result in them
being unusable with HD Writer VE 3.0.
It is impossible to write data to the built-in memory or SD card on this
unit from a PC.
Example folder structure in built-in memory/SD card:
CAM_SD/CAM_MEM
DCIM
100CDPFP
IMGA0001.MP4
IMGA0002.JPG
IMGA0003.M4A
The following data will be recorded.
1
Up to 999 files of motion pictures/still pictures/audio files can
be recorded in a single folder.
If you record further images/audio, a 101CDPFP folder is
created and the files are stored in this new folder. The folders
are numbered 102CDPFP, 103CDPFP...and so on.
Recorded scenes
JPEG format pictures
Recorded audio
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
- 127 -
∫ Copying your still pictures to your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be copied to the PC with Explorer
or other programs.
1
Double click the folder that contains the still pictures. ([DCIM] #
[100CDPFP] etc.)
2
Drag and drop the still pictures onto the destination folder (on
the PC’s HDD).
≥ Do not delete the SD card’s folders. Doing so may make the SD card
unusable in this unit.
≥ When data not supported by this unit has been recorded on a PC, it will
not be recognized by this unit.
≥ Always use this unit to format SD cards.
∫ Charging the battery by connecting it to different
devices
If you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
charge.
≥ Insert the USB cable securely all the way. It will not operate properly if
it is not inserted all the way.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
≥ Be sure to connect the unit directly to the PC, Blu-ray disc recorder or
DVD recorder.
≥ If you do not intend to use the unit for an extended period, disconnect
the USB cable from the unit for safety.
≥ During charging, the status indicator flashes red.
≥ If the status indicator flashes fast and then goes off or stays off,
charging will not be possible. Charge by using the AC adaptor. (l 12)
≥ It will take 2 or 3 times longer to charge compared to when using the
AC adaptor.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to
page 155.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 128 -
Using the unit as a web camera
When the unit is connected to a PC that is connected to the Internet, the
unit can be used as a web camera.
PC
IBM PC/AT compatible PC
Mac
Necessary
software
Windows Live Messenger
Messages
OS
Windows 8 (32 bit/64 bit)
Mac OS X
10.8.2
Windows 7 (32 bit/64 bit) or SP1
Windows Vista (32 bit) (SP2)
Windows XP (32 bit) (SP3)
CPU
Windows 8/Windows 7/Windows Vista: Intel Core 2
1 GHz or higher 32-bit (k86) or 64-bit Duo or better
(k64) processor (including compatible
CPU)
Windows XP: Intel Pentium III 450 MHz
or higher or Intel Celeron 400 MHz or
higher
RAM
Windows 8/Windows 7: 1 GB or more
(32 bit)/2 GB or more (64 bit)
Windows Vista Home Basic:
512 MB or more
2 GB or
more
Windows Vista Home Premium/
Business/Ultimate/Enterprise:
1 GB or more
Windows XP: 512 MB or more (1 GB or
more recommended)
Interface
USB port
Other
Mouse or equivalent pointing device
requirements
≥ Operation cannot be guaranteed on every PC having the
recommended environment.
≥ Not compatible with Microsoft Windows 3.1, Windows 95, Windows 98,
Windows 98SE, Windows Me, Windows NT and Windows 2000.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 129 -
≥ Operation is not guaranteed in the following cases.
jOperation on an upgraded OS.
jOperation on an OS other than the one pre-installed.
1 Connect the unit to a PC and set the unit to Web
Camera Mode. (l 125)
≥ The LCD monitor will turn off.
≥ When you select an option other than [WEB CAMERA], reconnect the
USB cable.
2 (On the PC)
Start Windows Live Messenger or Messages.
≥ Check that the unit has been selected in the Windows Live Messenger
or Messages settings.
≥ When disconnecting the USB cable from your PC, please close
Windows Live Messenger or Messages before disconnecting.
≥ After 12 hours, the unit is automatically turned off.
≥ In Web Camera Mode, the following functions are disabled.
j[DIGITAL ZOOM], [i.ZOOM], [FACE FRAMING], [E.I.S.(VIDEO)] and
[E.I.S.(PICTURE)]
≥ In Web Camera Mode, although the unit can record up to 30 frames
per second, this rate may drop due to network conditions and PC
processing speed.
≥ Operation cannot be guaranteed on all devices having a USB
connector.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 130 -
With a PC
Starting HD Writer VE 3.0
≥ To use the software, log on as an Administrator or as user name for
standard user account (only for Windows 8/Windows 7/Windows
Vista).
The software cannot be used with the user name for a guest account.
(On the PC)
Select [Start] # [All Programs] # [Panasonic] #
[HD Writer VE 3.0] # [HD Writer VE 3.0].
≥ For details on how to use the software applications, read the PDF
operating instructions of the software.
Reading the operating instructions of the
software applications
≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0
or later to read the PDF operating instructions.
Select [Start] # [All Programs] # [Panasonic] #
[HD Writer VE 3.0] # [Operating Instructions].
Download from Www.Somanuals.com. All Manuals Search And Download.
- 131 -
With a PC
If using Mac
≥ HD Writer VE 3.0 is not available for Mac.
≥ iMovie’11 supported. For details about iMovie’11, please contact
Apple Inc.
∫ Operating environment
PC
Mac
OS
Mac OS X 10.8.2
Intel Core 2 Duo or better
2 GB or more
CPU
RAM
Interface
Other
requirements
USB port
Mouse or equivalent pointing device
≥ Even if the system requirements mentioned in this owner’s manual are
fulfilled, some computers cannot be used.
≥ The USB equipment operates with the driver installed as standard in
the OS.
≥ Supplied CD-ROM is available for Windows only.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 132 -
∫ Copying still pictures on a Mac
1 Connect this unit to a Mac via the supplied USB
cable.
≥ The USB function selection screen will appear.
2 Select [CARD READER] using the SET button on the
unit, and press the SET button.
≥ The LCD monitor will turn off.
≥ This unit is automatically recognized as an external drive of Mac.
≥ If you select anything other than [CARD READER], remove and then
reconnect the USB cable.
3 Double click on the [CAM_SD] or [CAM_MEM]
displayed on the desktop.
≥ Files are stored in [100CDPFP] folder etc. in the [DCIM] folder.
4 Using a drag-and-drop operation, move the pictures
you want to acquire or the folder storing those
pictures to any different folder on the Mac.
∫ To disconnect USB cable safely
Drag [CAM_SD] or [CAM_MEM] disk icon to the [Trash], and then
disconnect the USB cable.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 133 -
With a PC
™
Using the Eye-Fi card
By using the Eye-Fi card (commercially-available), you can save files
recorded on a card to a PC or file-sharing site via a wireless network.
≥ The functions of the Eye-Fi card (including wireless transmission)
are not guaranteed to work on this product. In the case of a
malfunction of the card, please contact the card manufacturer.
≥ To use the Eye-Fi transfer feature, a broadband wireless LAN
environment is required.
≥
To use the Eye-Fi card, permission from the national or regional
government is required. Do not use if you have not obtained permission. If
you are unsure as to whether use is permitted, please check with the card
manufacturer.
≥ Configuring the appropriate security settings (encryption settings) is
strongly recommended to prevent interception, unauthorized use,
spoofing or other types of hacking of communication data. Read
the Eye-Fi card and access point instruction manual for more
information.
≥ Install the software supplied with the Eye-Fi card in advance
on your PC, and configure the Eye-Fi settings. (For settings
methods etc., please read the card operating instructions or
consult the card manufacturer)
≥ Insert the Eye-Fi card.
Select the menu.
[MENU]:
# [Eye-Fi] # [TRANSFER] # [ON]
2
≥
When [TRANSFER] is set to [ON], the transferable files will be transferred
automatically.
≥
≥
To cancel the forwarding of a file, turn off the unit or set [TRANSFER] to [OFF].
The setting at the time of purchase is [OFF]. Every time the Eye-Fi card is
removed from the unit, this setting is set to [OFF].
≥
You can check the transfer of the file on the thumbnail screen (8-file display).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 134 -
File has been transferred
File waiting for transfer
File cannot be transferred
∫ Using Direct Mode
The files can be transferred directly from the Eye-Fi card to a smartphone
or tablet without going through the access point when necessary setting
is performed in a PC in advance.
≥ Install the software supplied with the Eye-Fi card on your PC, and
configure the Direct Mode settings.
≥ Insert the Eye-Fi card.
Select the menu.
[MENU]:
# [Eye-Fi] # [START DIRECT MODE]
2
≥ If any of the following operations are performed, the Direct Mode will
be canceled.
jIf you turn the unit off
jClosing the LCD monitor, sending the unit into Standby Mode.
jStarting motion picture or audio recording
The Direct Mode may be canceled by the Eye-Fi card for reasons other
than the above.
≥ In Direct Mode, the Economy Mode function (l 47) is disabled.
≥ When [TRANSFER] (l 134) is set to [OFF], [START DIRECT MODE]
cannot be selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 135 -
∫ Selecting files to transfer
If you perform the required settings in advance on your PC, you can
transfer selected files alone. For settings methods etc., please read the
card operating instructions or consult the card manufacturer.
≥ Install the software supplied with the Eye-Fi card on your PC, and
configure the selection transfer settings.
≥ Insert the Eye-Fi card.
Select the menu.
[MENU]:
# [TRANSFER/PROTECT]
1
≥ The settings method is the same as for the protect settings. (l 103)
≥ For the files set for selected transfer,
is displayed on the
thumbnail screen (1-file display).
≥ If you have not performed selected transfer settings on your PC,
[PROTECT] is displayed and the selection transfer setting is disabled.
≥ When the write protect switch on the Eye-Fi card is on the LOCK side,
[PROTECT] is displayed and selected transfer setting is disabled.
Please unlock the write protect switch.
≥ The protect setting is also applied to the files for which [TRANSFER/
PROTECT] is set. To delete or rotate a file, first cancel [TRANSFER/
PROTECT] and then perform the operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 136 -
≥ The [Eye-Fi] menu only appears when an Eye-Fi card is used.
≥ The Eye-Fi transfer feature cannot be guaranteed to continue to
operate in the future due to changes to the card specification etc.
≥ Update the firmware of the Eye-Fi card to the latest one using the
software supplied with the Eye-Fi card before use.
≥ Eye-Fi transfer is terminated when it goes into Standby Mode by the
adaptor and set the [AC:REC/PLAY] in [ECONOMY] to [60 min].
(l 47) (Energy-save function will be disabled during the Direct Mode)
≥ When the endless memory function of the Eye-Fi card is set to on, the
files transferred from the card may be deleted automatically.
≥ The Eye-Fi card may heat up as a result of the files being transferred.
≥ When the Eye-Fi card is used, the battery will run down faster.
≥ Audio files cannot be handled.
≥ The [Eye-Fi] setting can be checked from the recording standby screen
or the thumbnail screen (1-file display).
In [Eye-Fi], [TRANSFER] is set to [ON]
(Transferring in Direct Mode)
In [Eye-Fi], [TRANSFER] is set to [ON]
In [Eye-Fi], [TRANSFER] is set to [OFF]
≥ When using the Eye-Fi card, please be sure to unlock the write-protect
switch. (l 17)
≥
Files cannot be transferred during motion picture recording or audio recording.
≥ Before deleting the files, please confirm they have been transferred to
your PC and uploaded to the sharing site.
≥ Do not use the Eye-Fi card in locations where the use of wireless
devices is forbidden, such as inside aircraft etc.
≥ Depending on network conditions, the transfer may take some time.
Also, if network conditions deteriorate, the transfer may be suspended.
≥ Files over 2 GB in size cannot be transferred. Such files should first be
split to reduce the file size. (l 96)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 137 -
Others
Indications
∫ Recording indications
3000
000:00:15
MF
MINI
ISO400
F3.5
1/30
A
(White)
(Red)
Still picture recording icon
Recording still picture
During burst recording (l 57)
/
/
/
/
/
/
/
/
Number of recording pixels for still pictures (l 63, 86)
In Playback Mode, the picture size is not displayed for still pictures
recorded with other products that have different picture sizes from the
sizes shown above.
Burst recording (l 57)
16M
/
/
16M
/
/
Panorama recording (l 59)
Remaining number of still pictures (l 31)
High temperature warning (l 21)
Flash (l 70)
3000
ßA/ß/
Camera shake warning (l 32)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 138 -
/
/
/
/
/
/
/
/
/
/
/
Scene Mode (l 66)
MINI
/
1CLR
/
OLD
/
INTV
/
GHOST
/
FISH
/
HDRP
/
SKIN
/
B/W
/
SEPIA
/
VIVID
/
SOFT
Creative control (l 64)
ISO50/ISO100/ISO200/ISO400/ISO800/ISO1600
ISO sensitivity (l 74)
/
/
/
/
/
/
/
/
Intelligent Auto Mode (l 36)
F3.5
1/30
Iris value (l 31)
Shutter Speed (l 31)
/
Zoom/Double range zoom (l 53)
B
Eye-Fi settings (l 137)
/
/
(Gray)
(Red)
Audio recording icon
Recording audio
Focus mark (l 75)
Spot metering target (l 75)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 139 -
C
/
/
/
/
/
Recording Mode (l 62)
(White)
(Red)
Motion picture recording icon
Recording motion picture
μ (Red)
Recording motion picture (l 28)
Recording audio (l 35)
000:00:15
Recording time elapsed (l 28, 35)
Approximate remaining recordable time
(l 28, 35)
AF Lock (l 79)
AE Lock (l 79)
Ø10/Ø2
Self-timer Recording (l 71)
Card recording possible status
Built-in memory recording possible status
Image Stabilizer (l 55)
/
/
/MF/
Focus (l 83)
Remaining battery power (l 15)
∫ Playback indications
1/;/5/6/D/E
00:00:30
Display during playback (l 40, 84)
Playback Time (Motion picture)
Playback Time (Audio)
000:00:30
NOV 15 2013 3:30PM Recording date and time
NOV 15 2013
100-0001
Recording date
Folder number/file number
Motion picture file
Audio file
Download from Www.Somanuals.com. All Manuals Search And Download.
- 140 -
Files for which selected transfer/protect is set
(l 103, 136)
Face detection (l 76)
/
Panorama still picture (l 59)
Creative control (l 93)
1CLR
B/W
OLD
FISH
VIVID
SKIN
SOFT
/
/
/
/
/
/
/
SEPIA
Eye-Fi transfer status (l 134)
/
/
/
Files exceeding 4 GB in size (l 42)
Remaining battery power (l 15)
Files which cannot be played back
∫ Confirmatory indications
––– –– –––– ––:–––– The built-in battery is low. (l 24)
(Time display)
Incompatible SD card is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 141 -
Others
Messages
Major confirmation/error messages to be indicated on the screen in text.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this indication appears despite motion pictures, still pictures and
unstable state. Re-insert the SD card and turn the unit off and on
again.
CARD FULL.
Built-in Memory full.
There is no space on the SD card or in built-in memory. Please delete
unneeded files or use an SD card with space on it.
Card is protected
The write protection switch on the SD card is in the LOCK position.
Please unlock the write protect switch. (l 17)
Overheat. Turn off camera now.
INTERNAL TEMPERATURE TOO HIGH. PLEASE TURN UNIT OFF
AND WAIT A WHILE.
The temperature within the unit is increasing. Turn the unit off and wait
until the temperature decreases before starting recording again.
(l 21)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 142 -
Others
Troubleshooting
∫ It is not a malfunction in following cases
Object seems to be ≥ Object seems to be warped slightly when the
warped.
object moves across the image very fast, but
this is because the unit is using MOS for the
image sensor. This is not a malfunction.
White round spots
like soap bubbles
appear on the
≥ If you take a
picture with the
flash in a dark
recorded picture.
place or indoors,
white round spots
may appear on
the picture caused by the flash reflecting of
particles of dust in the air. This is not a
malfunction. A characteristic of this is that the
number of round spots and their position
differ in every picture.
Why does the
≥ Condition due to the LCD monitor
characteristics. Not a malfunction. Spots only
appear in the LCD monitor and will not be
recorded with the images.
displayed image
contain some red,
blue and green
dots, or why are
black spots visible.
The lens or LCD
monitor fog up.
≥ This is due to condensation. This is not a
malfunction. Please refer to page 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 143 -
Power
Problem
Check points
This unit cannot be
turned on.
≥ Recharge the battery pack or connect the
AC adaptor. (l 12)
≥ In cold places, the battery using time
This unit does not
stay on long
enough.
becomes shorter.
≥ It is possible to insert the battery incorrectly,
so please pay particular attention when
inserting that it is correctly oriented.
Battery runs down
quickly.
The battery does
not charge.
≥ Check that the plug portion of the AC
adaptor is not misaligned.
The battery does
not stop charging.
This unit is turned
off automatically.
≥ If the unit has not been operated for
approximately 5 minutes (settings at the
time of purchase) when the power is turned
on, the ECONOMY function will activate and
switch to Standby Mode to limit power
consumption in situations such as the user
forgetting to turn the unit off. When the unit
is in Standby Mode, press the power button.
≥ If the unit turns off when you turn off the
power to the TV using the TV remote
control, the VIERA Link is at work. If you are
not using the VIERA Link, set [VIERA Link]
to [OFF]. (l 109)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 144 -
Power
Problem
Check points
This unit cannot be
operated though it
is turned on.
≥ Remove the battery or AC adaptor, wait
about 1 minute and then reconnect the
battery or AC adaptor. Then about 1 minute
later, turn on the unit again. (Conducting the
above operation while the media is being
accessed may damage the data on the
media.)
This unit does not
operate normally.
≥ If normal operation is still not restored,
detach the power connected, and contact
consumer support.
A blinking high
temperature
warning icon
is shown, and the
unit does not turn
on.
≥ The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.
“ERROR
≥ Check each of the following items.
jRemove the SD card from the device and
reinsert.
jRemove the battery and then put it in
again.
jChange the SD card and check.
≥ If a message is still displayed after checking
the above, detach the power connected,
contact consumer support.
OCCURRED.
PLEASE TURN
UNIT OFF, THEN
TURN ON AGAIN.”
is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 145 -
Indication
Problem
The battery
Check points
≥ [DISPLAY] is [OFF]. (l 46)
capacity indication
or the elapsed time
indication is not
shown.
Status indicator
Problem
Check points
The status
indicator is
flashing red.
≥ During battery charging, the status indicator
flashes red with a period of approximately
2 seconds (approximately 1 second on,
1 second off). When charging ends, the
status indicator turns off. This is not a
malfunction.
Recording
Problem
Check points
The high
≥ The battery temperature or unit internal
temperature (excluding battery) rises. Wait
for the temperature to drop before using the
unit again.
temperature
warning icon
is displayed and
recording is not
possible.
When recording
still pictures, the
angle of view of
the image
≥ The field of view of the image displayed on
the LCD monitor differs for motion picture
recording and still picture recording. At time
of purchase, the recording standby screen
displayed on the
LCD monitor
changes.
shows video view. Press the
button
halfway to change to photo view. To change
the angle of view of the recording standby
screen to photo view, set [PHOTO VIEW] to
(ON). (l 72)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 146 -
Recording
Problem
Check points
The unit arbitrarily
stops recording.
≥ Use an SD card that can be used for motion
picture recording. (l 16)
≥ The recordable time may have shortened
due to the deterioration of the data writing
speed or repeated recording and deletion.
memory. (l 48)
Image not in focus. ≥ Hold down the power button until the LCD
monitor goes off and then turn the power on
again. When [FOCUS] is set to
(MANUAL), do the above, then reconfigure
the Manual Focus.
There is noise in
the recording
image.
≥ When the [ISO] setting is too high, noise
may appear in the recorded images. Please
lower the ISO sensitivity setting. (l 74)
Color balance of
images is strange
when recording in
a place such as a
gymnasium.
≥ In a place with multiple light sources, such
as a gymnasium or a hall, set the White
Balance setting to
(INDOOR 2). If you
cannot record clearly with the
(INDOOR 2), set it to
(WHITE SET).
(l 81)
Color or
≥ Color or brightness of the image may
change, or you may see horizontal bars in
the image when the object is recorded
under fluorescent light, mercury light or
sodium light, etc., but this is not a
malfunction.
brightness of the
image changes, or
you may see
horizontal bars in
the image.
≥ Record in Intelligent Auto Mode.
The LCD monitor
flickers indoors.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 147 -
Playback
Problem
Check points
≥ Any files where the thumbnails display are
displayed as cannot be played back.
Files cannot be
played back.
Files cannot be
deleted.
≥ Release the protect setting. (When using
the Eye-Fi card, the protect setting is
simultaneously set for files for which
selected transfer is set) (l 103, 136)
≥ Any files where the thumbnails are
displayed as
cannot be deleted. If the
files are unnecessary, format the media to
erase the data. (l 48) Please be aware that
if a media is formatted then all the data
recorded on the media is erased and cannot
be recovered. Back up important data on a
PC, disc, etc.
Editing such as
rotation of the files
is not possible.
≥ Release the protect setting. (When using
the Eye-Fi card, the protect setting is
simultaneously set for files for which
selected transfer is set) (l 103, 136)
During playback,
there is no sound.
≥ Adjust the play volume in this unit. (l 41)
With other products
Problem
Check points
Video or audio is
not output even
though it is
connected to TV
correctly.
≥ Please read the operating instructions of
your TV and select the channel that
matches the input used for the connection.
≥ Change the [TV ASPECT] setting to match
the aspect ratio of the TV. (l 107)
≥ When connecting with the HDMI mini cable,
The images are
squeezed
horizontally.
change the [HDMI] setting. (l 108)
≥ Depending on the status of the unit and the
connecting cable, a picture may not appear
on the TV or LCD monitor. Check the status
of the unit and the connection. (l 106)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 148 -
With other products
Problem
Check points
If the SD card is
inserted in another
device, it is not
recognized.
≥ Check that the device is compatible with the
capacity or type of SD card (SD Memory
Card/SDHC Memory Card/SDXC Memory
Card) that you inserted. Refer to the
operating instructions of the device for
details.
VIERA Link does
not work.
(Setting on this unit)
≥ Connect with an HDMI mini cable (optional).
(l 104)
≥ Set [VIERA Link] to [ON]. (l 109)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch
automatically, switch the input using the TV
remote control.
≥ Check the VIERA Link setting on the
connected device.
≥ Please refer to the operating instructions of
the connected device.
With a PC
Problem
Check points
An error message
may appear on the
PC when you
charge the battery
by connecting the
USB cable to a PC.
≥ First disconnect the USB Connection Cable,
then turn on the unit and reconnect. The unit
will be recognized by the PC. To charge the
battery, first safely disconnect the USB
cable and turn off the unit. Then reconnect
the USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 149 -
With a PC
Problem
Check points
When connected
by the USB cable,
this unit is not
detected by the
PC.
≥ After re-inserting the SD card into the unit,
reconnect the supplied USB cable.
≥ Select another USB connector on the PC.
≥ Check the operating environment. (l 120,
132)
≥ Connect the supplied USB cable again after
restarting the PC and turning on this unit
again.
When the USB
cable is
≥ To disconnect the USB cable safely, double-
click the
icon in the task tray and follow
disconnected, an
error message will
appear on the PC.
the instructions on the screen.
Cannot see the
PDF operating
instructions for
HD Writer VE 3.0.
≥ You will need Adobe Acrobat Reader 5.0 or
later or Adobe Reader 7.0 or later to read
the PDF operating instructions for HD Writer
VE 3.0.
Others
Problem
Check points
If the SD card is
inserted in this
unit, it is not
recognized.
≥ If the SD card is formatted on a PC, it may
not be recognized by this unit. Use this unit
to format SD cards. (l 48)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 150 -
Others
Cautions for use
About this unit
The unit and the SD card become warm during use. This is not a
malfunction.
Keep this unit as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
≥ If you use this unit on top of or near a TV, the pictures and/or sound on
this unit may be disrupted by electromagnetic wave radiation.
≥ Do not use this unit near cell phones because doing so may result in
noise adversely affecting the pictures and/or sound.
≥ Recorded data may be damaged, or pictures may be distorted, by
strong magnetic fields created by speakers or large motors.
≥ Electromagnetic wave radiation generated by microprocessors may
adversely affect this unit, disturbing the pictures and/or sound.
≥
If this unit is adversely affected by electromagnetic equipment and stops
functioning properly, turn this unit off and remove the battery or disconnect
AC adaptor. Then reinsert the battery or reconnect AC adaptor and turn
this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
≥ If you record near radio transmitters or high-voltage lines, the recorded
pictures and/or sound may be adversely affected.
Make sure to use the supplied cords and cables. If you use optional
accessories, use the cords and the cables supplied with them.
Do not extend the cords and the cables.
Do not spray insecticides or volatile chemicals onto the unit.
≥ If the unit is sprayed with such chemicals, its body may be marred and
the surface finish may peel off.
≥ Do not leave rubber or plastic products in contact with the unit for a
long time.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 151 -
When you use the unit in a sandy or dusty place such as a beach,
do not let sand or fine dust get into the body and terminals of the
unit.
Also, keep the unit away from sea water.
≥ Sand or dust may damage the unit. (Care should be taken when
inserting and removing a card.)
≥ If sea water splashes onto the unit, wipe off the water with a well wrung
cloth. Then wipe the unit again with a dry cloth.
When carrying the unit, do not drop or bump it.
≥ A strong impact can break the unit’s casing, causing it to malfunction.
Cleaning
≥ Before cleaning, detach the battery or pull the AC adaptor from the AC
outlet, and then wipe the unit with a soft, dry cloth.
≥ If the unit is very dirty, dip a cloth in water and squeeze firmly, and then
wipe the unit with the damp cloth. Next, dry the unit with a dry cloth.
≥ Use of benzine, paint thinner, alcohol, or dishwashing liquid may alter
the camera body or peel the surface finish. Do not use these solvents.
≥ When using a chemical dust cloth, follow the instructions that came
with the cloth.
Do not use the unit for surveillance purposes or other business
uses.
≥ This unit was designed for consumer intermittent use. It was not
intended for continuous use, or for any industrial or commercial
application resulting in prolonged use.
≥ In certain situations, continuous use could cause the unit to overheat
and cause a malfunction. Such use is strongly discouraged.
When you are not going to use the unit for an extended time
≥ When storing the unit in a cupboard, it is recommended that you place
a desiccant (silica gel) in with it.
When disposing of or giving away this unit, note that:
≥ Conducting a logical format or deleting the data on the built-in memory
of this unit only modifies the file management records, and the data
contained within the built-in memory is not completely deleted. The
data may be able to be recovered using commercially available
products such as data recovery (restoration) software.
≥ When disposing of/giving away the unit, we recommend that you
physically format the built-in memory of the unit. (l 48)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 152 -
≥ Please look after the data in your built-in memory carefully. Panasonic
will not be held responsible in the unlikely case that private data is
divulged.
About the battery
The battery used in this unit is a rechargeable lithium-ion battery. It is
susceptible to humidity and temperature and the effect increases the
more the temperature rises or falls. In cold areas, the full charge
indication may not appear or the low battery indication may appear about
5 minutes after starting use. At high temperatures, the protection function
may be triggered, making it impossible to use the unit.
Be sure to detach the battery after use.
≥ If the battery is left attached, a minute amount of current continues to
flow even if the unit is off. Keeping the unit in this state may result in
over discharge of the battery. This may result in you not being able to
use the battery even after it is charged.
≥ The battery should be stored in the vinyl bag so metal does not come
into contact with the terminals.
≥ The battery should be stored in a cool place free from humidity, with as
constant temperature as possible. (Recommended temperature: 15 oC
to 25 oC (59 oF to 77 oF), Recommended humidity: 40%RH to 60%RH)
≥ Extremely high temperatures or low temperatures will shorten the life
of the battery.
≥ Do not contaminate the terminal portion of the battery attachment
portion or the battery terminals.
≥ If the battery is kept in high-temperature, high-humidity, or oily-smoky
places, the terminals may rust and cause malfunctions.
≥ To store the battery for a long period of time, we recommend you
charge it once every year and store it again after you have completely
used up the charged capacity.
≥ Dust and other matter attached to the battery terminals should be
removed.
≥ Do not remove the external labels and this may result in a malfunction
of the unit.
Prepare spare batteries when going out for recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 153 -
≥ Prepare batteries enough to last for 3 to 4 times the period you are
planning to record for. Cold places such as a ski resort can shorten
recording time.
If you drop the battery accidentally, check to see if the terminals are
damaged.
≥ Inserting a battery with damaged terminals can damage the unit.
Do not throw old battery into fire.
≥ Heating a battery or throwing it into a fire may result in an explosion.
If the operating time is very short even after the battery has been
recharged, the battery has worn out. Please purchase a new battery.
About the AC adaptor
≥ If the temperature of the battery is extremely high or extremely low,
charging may take time or the battery may not be charged.
≥ If you use the AC adaptor near a radio, radio reception may be
disturbed. Keep the AC adaptor 1 m (3.3 feet) or more away from the
radio.
≥ When using the AC adaptor, it may generate whirring sounds.
However, this is normal.
≥ After use, be sure to disconnect the AC adaptor. (If you leave this unit
connected, the AC adaptor will consume approximately 0.2 W of
current.)
≥ Always keep the electrodes of the AC adaptor clean.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 154 -
About status indicator during charging
When the status indicator is flashing at a particularly fast or slow
rate, the following should be considered.
Flashing with approx. 4 second period (off for approx. 2 seconds,
on for approx. 2 seconds):
≥ When the battery is over discharged or the temperature of the battery
is too high or low. It can be charged, but it may take a few hours to
complete the charging normally.
≥ It will flash in approx. 2 second intervals when normal charging
resumes. Even in such cases, it may start flashing in approx. 4 second
intervals until charging is completed depending on the conditions of
use.
Flashing with approx. 0.5 second period (off for approx.
0.25 second, on for approx. 0.25 second):
≥ The battery is not charged. Remove the battery from the unit, and try
charging again.
≥ Check that the terminals of the unit or battery are not dirty or covered
with a foreign object, and connect the battery correctly once again. If a
foreign object or dirt is present, turn off the unit before removing.
≥ The battery or environment is at an extremely high or low temperature.
Wait until the temperature has returned to an appropriate level and try
charging again. If you are still unable to charge, there may be a fault in
the unit, battery or AC adaptor.
Off:
≥ Charging has finished.
≥ If the status indicator stays off despite the charging being unfinished,
there may be a fault in the unit, battery or AC adaptor. Refer to page
153 for details on the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 155 -
About the SD card
When disposing of or giving away the SD card, note that:
≥ Conducting a logical format or deleting the data on the SD card using
functions available on the unit or a computer only modifies the file
management records, and the data contained within the SD card is not
completely deleted.
≥ It is recommended that the SD card is physically destroyed or the SD
card is physically formatted using this unit when disposing of or giving
away the SD card. (l 48)
≥ The customer is responsible for the management of the data in the SD
card.
LCD monitor
≥ When the LCD monitor gets dirty, wipe it with a soft cloth, such as
eyeglass cleaner.
≥ In a place with drastic temperature changes, condensation may form
on the LCD monitor. Wipe it with a soft cloth, such as eyeglass cleaner.
≥ When the unit has become very cold, for example due to storage in a
cold area, its LCD monitor will be slightly darker than usual
immediately after the unit is turned on. The normal brightness will be
restored when the unit’s internal temperature rises.
Extremely high precision technology is employed to produce the LCD
Monitor screen featuring a total of approximately 230,000 dots. The
result is more than 99.99% effective dots with a mere 0.01% of the
dots inactive or always lit. However, this is not a malfunction and does
not affect the recorded picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 156 -
Others
About copyright
∫ Carefully observe copyright laws
Whatever you have recorded and created can be used for your
personal entertainment only. Under copyright laws, other materials
cannot be used without obtaining permission from the holders of
the copyrights.
∫ Licenses
≥ SDXC Logo is a trademark of SD-3C, LLC.
≥ HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
™
≥ VIERA Link is a trademark of Panasonic Corporation.
™
≥ EZ Sync is a trademark of Panasonic Corporation.
™
≥ HDAVI Control is a trademark of Panasonic Corporation.
®
®
®
≥ Microsoft , Windows and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
≥ Microsoft product screen shot(s) reprinted with permission from
Microsoft Corporation.
≥ IBM and PC/AT are registered trademarks of International Business
Machines Corporation of the U.S.
®
®
®
®
≥ Intel , Pentium , Celeron and Intel Core™ are trademarks of Intel
Corporation in the U.S. and/or other countries.
≥ AMD Athlon™ is a trademark of Advanced Micro Devices, Inc.
≥ iMovie, Mac and Mac OS are trademarks of Apple Inc. registered in the
U.S. and other countries.
≥ Other names of systems and products mentioned in these instructions
are usually the registered trademarks or trademarks of the
manufacturers who developed the system or product concerned.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 157 -
This product is licensed under the AVC patent portfolio license for the
personal and non-commercial use of a consumer to (i) encode video in
compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer engaged in a personal and non-
commercial activity and/or was obtained from a video provider licensed
to provide AVC Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 158 -
Others
Recording Modes/approximate
recordable time
≥ SD cards are only mentioned with their main memory size. The stated
times are the approximate recordable times for continuous recording.
Recording
Mode
*1
*1
*1
*1
*2
Picture size
1920k
1080 1920
k
1080 1280
k
720 1280
k
720 640k480
4 GB
SD
20 min
30 min
30 min
50 min 2 h 20 min
16 GB 1 h 50 min 2 h 10 min 2 h 10 min 3 h 30 min 9 h 50 min
card
64 GB
7 h
8 h 20 min 7 h 50 min 13 h 20 min
32 h
Built-in Approx.
memory 65 MB
15 s
20 s 20 s 40 s
*3
Recording Mode
Picture size
4 GB
960k540
20 min
VOICE RECORD
31 h
128 h
512 h
SD card
16 GB
64 GB
1 h 20 min
5 h 20 min
Built-in
memory
Approx.
65 MB
10 s
30 min
*1 High-definition image quality
*2 Conventional standard image quality
*3 Please use when playing back/editing on a Mac.
≥ If recording for long periods, prepare batteries for 3 or 4 times the
period you wish to record for. (l 14)
≥ The default setting is
mode.
≥ Recording a quickly moving subject or recording a number of short
scenes may shorten the recordable time.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 159 -
≥ When the [REC MODE] is set to
(VOICE RECORD), the file is
saved after approximately 5 hours of recording, and the audio
recording ends. With other Recording Mode setting, the unit saves the
file and saves the continuation in a new file when the file size exceeds
4 GB during recording. (A new file is created automatically every 4 GB.
The recording state is continued until the unit enters the paused state)
≥ Use time in the row of 4 GB in above table as a guideline for the time
that can be copied onto one DVD disc (4.7 GB).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 160 -
Others
Approximate number of
recordable pictures
≥ SD cards are only mentioned with their main memory size. The stated
number is the approximate number of recordable pictures.
Picture size
4608k3456
4:3
4352k3264
4:3
3072k2304
4:3
Aspect ratio
4 GB
450
500
1000
SD card
16 GB
64 GB
1900
2100
4200
7500
8500
16500
Built-in Approx.
memory 65 MB
5
5
15
Picture size
Aspect ratio
2048k1536
640k480
4:3
4:3
2300
9000
36000
4 GB
16500
67000
237000
SD card
16 GB
64 GB
Built-in
memory
Approx.
65 MB
40
250
Download from Www.Somanuals.com. All Manuals Search And Download.
- 161 -
Picture size
4352k2448 3744k2106 2560k1440 1920k1080
Aspect ratio
4 GB
16:9
650
16:9
900
16:9
1900
7500
31000
16:9
3400
SD
16 GB
card
2800
11000
3800
15000
13500
52000
64 GB
Built-in Approx.
memory 65 MB
10
15
30
50
(360e PANORAMA)
(180e PANORAMA)
Picture size
14400k720 1280
k
14400 7200k720 1280k7200
Aspect ratio
4 GB
s
s
400
800
SD
16 GB
card
1600
6500
3300
13000
64 GB
Built-in Approx.
memory 65 MB
5
10
≥ The memory capacity indicated on the label of an SD card is the total of
the capacity for copyright protection and management and the capacity
which can be used on the unit, a PC etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 162 -
Panasonic Corporation
Web site: http://panasonic.net
Download from Www.Somanuals.com. All Manuals Search And Download.
|