In-Dash 7” Widescreen Color LCD Monitor/DVD Receiver
Moniteur vidéo couleur grand-écran à écran à cristaux liquides de
7 pouces/récepteur DVD intégrés en tableau de bord
Monitor LCD en color de pantalla panorámica de 7”/receptor y DVD
empotrado en el tablero de instrumentos
TILT
CLOSE
Model:
CQ-VD7005U
PWR
MUTE
SRC
VOL
Operating Instructions
Manuel d’instructions
Manual de Instrucciones
ENTER
/
BAND
ENT
TOP MENU
CQ-VD7005U
TEXT
RET
RETURN
DVD MENU
VOL
CAR AV
ENTER
PWR
SRC
MUTE
MENU
NAVI
TEXT
¡Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product and keep
this manual for future reference.
¡Prière de lire attentivement ces instructions (y compris la “Garantie limitée” et le “Répertoire des services à la clientèle”) avant d’utiliser ce
produit et conserver ce manuel d’utilisation pour s’y référer ultérieurement.
¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia futura.
Download from Www.Somanuals.com. All Manuals Search And Download.
❑
Use the designated parts and tools for installation.
Use the supplied or designated parts and appropriate tools
to install the product. The use of parts other than those
supplied or designated may result in internal damage to the
unit. Faulty installation may lead to an accident, a malfunc-
tion or fire.
Do not block the air vent or the cooling plate of the
unit.
Blocking these parts will cause the interior of the unit to
overheat and will result in fire or other damage.
Do not install the product where it is exposed to
strong vibrations or is unstable.
Avoid slanted or strongly curved surfaces for installation. If
the installation is not stable, the unit may fall down while
driving and this can lead to an accident or injury.
Caution
Observe the following cautions when using
this unit.
Keep the sound volume at an appropriate level.
Keep the volume level low enough to be aware of road and
traffic conditions while driving.
Do not insert or allow your hand or fingers to be
caught in the unit.
To prevent injury, do not get your hand or fingers caught in
moving parts or in the disc slot. Especially watch out for
infants.
This unit is designed for use exclusively in auto-
mobiles.
Do not operate the unit for a prolonged period with
the engine turned off.
Operating the audio system for a long period of time with
the engine turned off will drain the battery.
2
❑
❑
❑
❑
❑
❑
❑
Installation Angle
The product should be installed in a horizontal position
with the front end up at a convenient angle, but not more
than 30˚.
The user should bear in mind that in some areas there may
be restrictions on how and where this unit must be
installed. Consult your dealer for further details.
Wear gloves for safety. Make sure that wiring is
completed before installation.
To prevent damage to the unit, do not connect the
power connector until the whole wiring is complet-
ed.
Do not connect more than one speaker to one set
of speaker leads. (except for connecting to a
tweeter)
❑
❑
Do not expose the unit to direct sunlight or exces-
sive heat.
Otherwise these will raise the interior temperature of the
unit, and it may lead to smoke, fire, or other damage to the
unit.
❑
❑
Do not use the product where it will be exposed to
water, moisture, or dust.
Exposure of the unit to water, moisture, or dust may lead
to smoke, fire, or other damage to the unit. Make especially
sure that the unit does not get wet in car washes or on
rainy days.
❑
Observe the following cautions when
installing.
Observe the following cautions when handling
the battery for the remote control unit.
❑
Refer wiring and installation to qualified service
personnel.
●
●
Use only specified battery (CR2025).
Match the polarity of the battery with the (+) and (–) marks
in the battery case.
Replace a dead battery as soon as possible.
Remove the battery from the remote control unit when not
using it for an extended period of time.
Insulate the battery (by placing them in a plastic bag or
covering them with vinyl tape) before disposal or storage.
Dispose of the battery according to the local regulations.
Do not disassemble, recharge, heat or short the battery. Do
not throw a battery into a fire or water.
Installation of this unit requires special skills and experi-
ence. For maximum safety, have it installed by your dealer.
Panasonic is not liable for any problems resulting from
your own installation of the unit.
●
●
●
❑
❑
Follow the instructions to install and wire the prod-
uct.
●
●
Not following the instructions to properly install and wire
the product could cause an accident or fire.
Take care not to damage the leads.
In case of battery leakage
When wiring, take care not to damage the leads. Prevent
them from getting caught in the vehicle chassis, screws,
and moving parts such as seat rails. Do not scratch, pull,
bend or twist the leads. Do not run them near heat sources
or place heavy objects on them. If leads must be run over
sharp metal edges, protect the leads by winding them with
vinyl tape or similar protection.
●
●
●
Thoroughly wipe the battery liquid off the battery case and
insert new battery.
If any part of your body or clothing comes into contact
with battery liquid, wash it with plenty of water.
If battery liquid comes into contact with your eyes, wash
them with plenty of water and get immediate medical atten-
tion.
CAUTION:
• PLEASE FOLLOW THE LAWS AND REGULATIONS OF YOUR STATE, PROVINCE OR COUNTRY FOR WIRING,
INSTALLATION, AND USE OF THIS UNIT AND THE DEVICES TO BE CONNECTED.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
CQ-VD7005U
Safety Information (continued)
Caution
THIS PRODUCT IS A CLASS I LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOUR-
SELF. REFER SERVICING TO QUALIFIED PERSONNEL.
3
The following applies only in the U.S.A.
This system is designed so that you
cannot see moving pictures while
you are driving.
Part 15 of the FCC Rules
FCC Warning:
Any unauthorized changes or modifications to this
equipment would void the user's authority to operate
this device.
Park your car in a safe place and pull the side
brake (parking brake) lever before watching the
monitor.
¡
A rear monitor (option) displays moving pic-
tures while driving.
Note:
¡Be sure to connect the side brake (parking
brake) connection lead. (aInstallation
Instructions)
¡
NOTICE:
This product has a fluorescent lamp that
contains a small amount of mercury. It also
contains lead in some components.
Disposal of these materials may be regulat-
ed in your community due to environmental
considerations. For disposal or recycling
information please contact your local
authorities, or the Electronics Industries
Alliance: <http://www.eiae.org.>
Notice
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material - special handling
may apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
CQ-VD7005U
Notes on Use
Liquid Crystal Panel
¡Do not cause impact to the liquid crystal panel.
¡Usage temperature range: 0 °C to 40 °C
{32 °F to 104 °F}
When the temperature is very cold or very hot, the
image may not appear clearly or may move slowly.
Also, movement of the image may seem to be out of
synchronization or the image quality may decline in
such environments. Note that this is not a malfunction
or problem.
4
¡In order to protect the liquid crystal panel, keep it out
of direct sunlight while the unit is not in use.
¡Sudden changes in the temperature inside the car such
as those which occur immediately after the car’s air
conditioner or heater has been turned on may cause
the inside of the liquid crystal panel to cloud over due
to water vapor or it may cause condensation (droplets
of water) to form and, as a result, the panel may not
work properly. Do not use the unit while these symp-
toms are in evidence but leave the unit standing for
about and hour, and then resume or start use.
Components
TILT
OPEN
/
CLOSE
1. Main Unit
(LCD monitor/DVD player)
7. Installation Hardware (screws,
cords, etc.)
(aInstallation Instructions)
P
/
CQ-VD7005U
0U
TL
O
TEXT
VOL
DISC
Qty.: 1
ENTER
TUNE
/
PWR
SRC
TRACK
MUTE
MENU
NAVI
PWR
Note:
MUTE
2. Remote Control Unit
<EUR7641060>
SRC
VOL
ENTER
/
BAND
ENT
¡The number in parenthesis underneath each accessory
part name is the part number for maintenance and
service.
¡Accessories and their parts numbers are subject to
modification without prior notice due to improvements.
TOP MENU
RET
RETURN
DVD MENU
(includes a battery: CR2025)
CAR AV
Qty.: 1
Qty.: 1
3. Wiping Cloth
<YEFX9991793>
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
4. Operating Instructions
<YFM284C671CA>
Qty.: 1
Qty.: 1
Qty.: 1
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
5. System Upgrade Guidebook
<YFM284C672CA>
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
6. Installation Instructions
<YFM294C097CA>
Download from Www.Somanuals.com. All Manuals Search And Download.
5
CQ-VD7005U
Customer Services Directory
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
U.S.A.
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Servicenter; purchase Parts and
Accessories; or make Customer Service and Literature requests
by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
1-800-211-PANA (7262),
Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Phone (787) 750-4300, Fax (787) 768-2910
5
CANADA
WARRANTY SERVICE
FOR PRODUCT OPERATION ASSISTANCE, please contact:
Our Customer Care Centre:
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users,
TTY : 1-877-833-8855
Telephone #:
1-800 #:
(905) 624-5505
1-800-561-5505
Fax #:
Email link:
(905) 238-2360
Accessory Purchases:
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
FOR PRODUCT REPAIRS, please locate your nearest Authorized
Servicentre at www.panasonic.ca:
or, send your request by E-mail to:
You may also contact us directly at:
TM
Link : “Servicentres locator” under “Customer support”
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday-
Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and prefer-
ably in the original carton.
Include details of the defect claimed, and proof of date of original
purchase.
For hearing or speech impaired TTY users,
TTY : 1-866-605-1277
Download from Www.Somanuals.com. All Manuals Search And Download.
6
CQ-VD7005U
Limited Warranty
Some states do not allow the exclusion or limitation of incidental or conse-
quential damages, or limitations on how long an implied warranty lasts, so
the exclusions may not apply to you.
U.S.A.
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. If a problem with this product develops
during or after the warranty period, you may contact your dealer or
Servicenter. If the problem is not handled to your satisfaction, then write to
warrantor’s Consumer Affairs Department at the addresses of the warrantor.
PANASONIC SALES COMPANY,
6
DIVISION OF PANASONIC PUERTO RICO, INC.
Ave. 65 de infanteria, Km. 9.5, San Gabriel Industrial Park
Carolina, Puerto Rico 00985
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WAR-
RANTY ARE YOUR RESPONSIBILITY.
PANASONIC AUTO PRODUCTS
LIMITED WARRANTY
Customer’s Record
Model
No.
LIMITED WARRANTY COVERAGE
If your product does not work properly because of defects in materials and
workmanship.
Serial
No.
Dealer’s
No.
Code
No.
Dealer’s
Address
Panasonic Consumer Electronics Company or Panasonic Sales Company
(collectively referred to as “the warrantor”) will, for the length of the period
indicated in the chart below, which starts with the date of original purchase
(“warranty period”), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or refurbished product. The
decision to repair or replace will be made by the warrantor.
Categories
Parts
Labor
Date of
Purchase
Audio Components (except items listed
below)
MXE Series Audio Components (except
items listed below)
One (1) Year
One (1) Year
Two (2) Years
One (1) Year
Two (2) Years
Not Applicable
Speakers
CANADA
Panasonic Canada Inc.
Defective Car Audio Speakers under war-
ranty must be exchanged at the place of
purchase. Contact your Dealer for details.
5770 Ambler Drive, Mississauga Ontario L4W 2T3
Accessories (in exchange for defective
items)
Ninety (90) Days Not Applicable
PANASONIC PRODUCT LIMITED WARRANTY
During the “Labor” warranty period, there will be no charge for labor. During
the “Parts” warranty period, there will be no charge for parts. You must carry
in or mail in your product prepaid during the warranty period. If non-
rechargeable batteries are included, they are not warranted. This warranty
only applies to products purchased and serviced in the United States or
Puerto Rico. This warranty is extended only to the original purchaser of a
new product which was not sold “as is”. A purchase receipt or other proof of
the original purchase date is required for warranty service.
Panasonic Canada Inc. warrants this product to be free from defects in mate-
rials and workmanship and agrees to remedy any such defect for a period as
stated below from the date of original purchase.
CAR AUDIO PRODUCT – ONE (1) YEAR, PARTS AND LABOUR
(The labour to install or remove the product is not warranted)
ACCESSORIES - NINETY (90) DAYS, (IN EXCHANGE FOR DEFECTIVE
ITEMS)
CARRY-IN OR MAIL-IN SERVICE
For Carry-In or Mail-In Service in the United States, call 1-800-211-PANA
(7262) or visit
For assistance in Puerto Rico, call Panasonic Sales Company (787)-750-
4300 or fax (787)-768-2910.
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to
any product which has been improperly installed, subjected to usage for
which the product was not designed, misused or abused, damaged during
shipping, or which has been altered or repaired in any way that affects the
reliability or detracts from the performance, nor does it cover any product
which is used commercially. Dry cell batteries are also excluded from cover-
age under this warranty.
This warranty is extended to the original end user purchaser only. A pur-
chase receipt or other proof of the original purchase date is required before
warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WAR-
RANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPE-
CIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limita-
tion of incidental or consequential damages, or the exclusion of implied war-
ranties, so the above limitations and exclusions may not be applicable.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials and work-
manship, and DOES NOT COVER normal wear and tear or cosmetic damage.
The warranty ALSO DOES NOT COVER damages which occurred during
shipment, failures which are caused by products not supplied by the warran-
tor, failures which result from accident, misuse, abuse, neglect, bug infesta-
tion, mishandling, misapplication, alteration, faulty installation, set-up
adjustment, maladjustment of consumer control, improper maintenance,
improper antenna, inadequate signal reception or pickup, power line surge,
improper voltage supply, lightning, modification, commercial use (such as
use in hotels, offices, restaurants, or other business uses) or rental use of
the product, or service by anyone other than the technician from Factory
Servicenter or other authorized service centers, or damage that is attributa-
ble to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIM-
ITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRAN-
TY. (As examples, this excludes damages for lost time, cost of having some-
one remove or re-install an installed unit if applicable, travel to and from the
servicer, and loss of media, data or other memory contents. The items listed
are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE
LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
CQ-VD7005U
Features
Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully
selected components, and assembled by people who are proud of the reputation their work has built for our company.
We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability
we have built into it, you too will be proud to be a member of our family.
7
Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
■ No device is connected to this unit. aBasic operations are covered only by this book.
■ Optional devices are connected to this unit. aRefer to the “System Upgrade Guidebook” in addition.
■ Simultaneous Multi-Device Connection
(with Expansion Module (hub unit))
You can connect the optional Expansion Module (hub
unit) (CY-EM100U). Connection of the Expansion
Module allows you to simultaneously connect
optional devices mentioned before as well as other
AV devices. For details, refer to the operating instruc-
tions for the Expansion Module.
■ CS Auto (Circle Surround Automotive)
CS Auto allows your car interior to change to a
splendid audio room in a moment. Every speaker can
be fine-tuned. ( page 35)
a
is a trademark of SRS Labs, Inc.
CS Auto technology is incorporated under license
from SRS Labs, Inc.
Connectable devices
¡CD/DVD changer (max. 1)
¡iPod (max. 2)
¡iPod with Video (max. 1)
¡XM Satellite Radio (max. 1)
¡Sirius Satellite Radio (max. 1)
¡Hands-Free Phone System (max. 1)
¡TV tuner (max. 1)
Note:
®
If you enable CS Auto, the following functions are
automatically disabled:
¡
GRAPHIC-EQ
,
CROSS OVER
,
DOWN MIX
,
MULTI-CH
(
a
page 34-39)
■ Touch Panel Operation
Note:
Simply touch the screen lightly to operate virtually all
functions. Easy-to-use menus and icons let you
“touch and choose” what you want, so you can start
using your system from the very first day. That also
means that while you drive, you can concentrate on
the road.
¡Market conditions regarding optional devices vary
with countries and regions. For further information,
consult your dealer.
¡If a non-Panasonic product is connected to this
unit, we do not guarantee the operations of the
product.
■ DVD-R, DVD-RW Playback
¡If iPod with Video is connected, no more iPod can
be connected.
(
a
page 18, 48 for details)
■ ID code
■ Integration of the monitor, FM/AM radio,
DVD Video/Video CD player and
CD/MP3/WMA player
4-digit ID code for increased security.
Fill in the ID code memo (apage 46).
■ Built-in AV Input/Output Terminals
For more convenient connection and setup, all termi-
nals are now provided on the unit itself.
■ Built-in Dolby Digital decoder, DTS decoder
You can enjoy a powerful 5.1 channel surround sys-
tem by connecting optional center speaker, power
amplifier and sub-woofer.
■ Built-in DSP
7 bands graphic equalizer. ( page 34)
a
■ GUI (Graphic User Interface)
GUI displays various indications with colorful sym-
bols to enhance visibility, enjoyment, and operability.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
CQ-VD7005U
Contents
English
Français
Español
2
52
102
¢Safety Information.......................... 2
¢Notes on use ................................................... 5
¢Components.................................................... 5
¢Customer Services Directory......................... 6
¢Limited Warranty............................................. 7
¢Features........................................................... 8
¢Contents .......................................................... 9
¢Preparation.................................... 10
First time power on, other settings, remote control
unit, symbols used in this manual
¢Name of Controls and Functions ................ 12
¢Touch Panel Operation Oveview................. 14
¢General .......................................... 16
Power on/power off, display open/close, source
selection, volume, mute, tilt angle, folding down the
display temporarily
¢
¢
Before Disc Playback..................... 18
Disc Player..................................... 20
¢Notes on MP3/WMA ...................................... 24
¢Radio.............................................. 26
¢AV1/AV2 ......................................... 28
¢Settings ......................................... 30
Menu operation
User (Clock setting), screen, audio, DVD, input/output,
radio
¢Troubleshooting ........................... 42
¢Maintenance .................................................. 47
¢Notes on Discs.............................................. 48
¢Language Code List...................................... 49
¢Definition of Terms ....................................... 50
¢Specifications................................................ 51
Download from Www.Somanuals.com. All Manuals Search And Download.
9
CQ-VD7005U
Preparation
First Time Power On
Remote Control Unit
The speaker setup screen appears after the opening dis-
play when the power is turned on for the first time.
Perform speaker setup according to the car conditions in
Before Initial Use
Pull the insulation film out from the
backside of the remote control gently.
9
SP SETUP
which this unit is installed. (
apage 36)
Other Settings
Please refer to the separate “System Upgrade
Guidebook” for how to operate this unit when option-
al devices are connected.
Battery Replacement
q Remove the battery holder with the remote control
unit placed on a flat surface.
q Stick your thumbnail into the groove and push the
holder in the direction of the arrow at the same
time.
w Pull it out in the direction of the arrow using a
tough pointed object.
(user settings)( page 32)
a
USER
display unit, clock, ID code, memory clear, other
(screen settings)( page 34)
a
SCREEN
Tough pointed object
dimmer, picture
(audio settings)( page 34)
a
AUDIO
sound setup, graphic equalizer, CS Auto, speaker setup,
speaker level, time alignment, source level, cross over
(DVD settings)( page 38)
a
DVD
w Put a battery in the case with (+)-side facing up.
e Put the case back.
language, display, pro logic, down mix, dynamic range
compression, multiple channel
Lithium battery
(CR2025)
(AV-IN/OUT settings)( page 39)
a
2
INPUT/OUTPUT
source skip
(radio settings)( page 40)
a
RADIO
3
Battery case
FM set up, AM set up
Note:
Warning
Refer to “Settings” ( page 30) for further informa-
¡
a
¡Keep batteries away from children to avoid the risk
of accidents. If an infant ingests a battery, please
seek immediate medical attention.
tion about operations, settings, and others of the
menu screen.
You may need to set the following depending on the
devices to be connected.
Caution
¡Remove and dispose of an old battery immediately.
¡Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
Subwoofer
¡
Execute SP LEVEL (speaker level). ( page 36)
a
¡Follow local regulations when disposing of a battery.
¡Improper use of a battery may cause overheating, an
explosion or ignition, resulting in injury or a fire.
AV1/AV2 (Camcorder, VCR, etc.)
Note:
¡Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
Battery Life: Approximately 6 months under normal
use (at room temperature)
Adjust SOURCE LEVEL (AV1/AV2 input level).
¡
(
a
page 37)
Warning
¡When you connect external devices to AV1-IN/
AV2-IN (AV1/AV2), be sure to connect the side
brake connection lead (aInstallation Instructions).
Notice
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material - special handling
may apply.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
CQ-VD7005U
Symbols used in this manual
Pictographs
Disc Marks
10
The following pictographs are used for the descriptions
You can perform some operations of this unit in one or
more methods with the touch panel or remote control.
This book explains such operations in tabular form as fol-
lows. Refer to the following for the pictographs located in
the upper part of each table.
of disc operation. (apage 19-23)
DVD
: DVD
VCD
: VCD (Video CD)
CD : CD
Compatible
Discs
MP3 : CD-R/RWs containing MP3 files
WMA : CD-R/RWs containing WMA files
Compatible types of disc
The discs compatible with the targeted operation.
Operation on the Touch Panel
You can use the touch panel to perform the targeted
operation. If the operation is not executable with the
touch panel, “––” is displayed.
Operation on the Remote Control Unit
You can use the remote control to perform the targeted
operation. If the operation is not executable with the
remote control, “––” is displayed.
Operation on the Main Unit
You can use the Main Unit to perform the targeted opera-
tion. If the operation is not executable with the Main Unit,
“––” is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
CQ-VD7005U
Name of Controls and Functions
![TILT]
Main Unit
o[OPEN] (CLOSE)
(Display Raised)
TILT
CLOSE
11
q[ASP] (ASPECT)
(P•MODE (PRIVATE
MODE))
Display
Disc slot
Remote control
sensor
w[VOL]
i
CQ-VD7005U
TEX
[}] [{]
(DISC)
VOL
[]] [[ ]
ENTER
PWR
SRC
(TUNE/TRACK)
MENU
NAVI
MUTE
e[MUTE]
[ENTER]
r[SRC] (PWR)
u [u]
t[MENU]
(SOURCE/POWER)
y[NAVI]
Main Unit
Dimmer sensor ( DIMMER
page 34)
a
(Display Closed)
![TILT]
ASPECT
ASP
TILT
OPEN
q[ASP] (ASPECT)
o[OPEN]
P·MODE
CQ-VD7005U
(P•MODE)
VOL
ENTER
PWR
SRC
MENU
NAVI
MUTE
Note:
¡[ASP], [MENU], [u], [OPEN], [TILT] are available only on the main unit.
: This book refers to connections to the Panasonic car navigation system that will come onto the market in the future. Descriptions
regarding the car navigation system are boxed with a dotted line.
¡Selects the aspect ratio.
¡Activates/inactivates the private mode.
¡Selects a folder or a disc.
¡Selects (vertically) or adjusts an operation
or item.
[ASP]
(ASPECT)
(P•MODE)
q
i[}] [{]
(DISC)
¡Selects or searches for a track, file, sta-
tion.
¡Selects or searches for a channel.
¡Selects (horizontally) or adjusts an opera-
tion or item.
[]] [[]
¡Adjusts the sound volume.
VOL
[
]
w
e
r
(TUNE/TRACK)
¡Mutes the sound temporarily.
MUTE
[
]
¡Switches on/off the power.
¡Changes the modes such as sound and
picture.
[SRC]
(PWR)
¡Selects a band.
¡Shows OSD.
¡Searches for broadcast stations and
memorizes them automatically.
¡Determines an operation or item.
ENTER
[
]
¡Shows the menu screen.
MENU
[
]
t
y
¡Switches navigation mode on and off.
(available in the future)
NAVI
[
]
¡Opens/closes the monitor.
¡Ejects/reloads a disc.
[
OPEN
]
[
]
o
!
u u
(CLOSE)
Note:
¡A disc is in the slot when this is illuminat-
¡Adjusts the monitor position.
¡Tilts the monitor forward temporarily.
TILT
[
]
ed in blue.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
CQ-VD7005U
Remote Control
Aim the remote control at the remote control sensor of the main unit and operate it.
12
q[SRC] (PWR)
(SOURCE/POWER)
MUTE
r[
]
PWR
MUTE
[+] [–]
t
(VOL)
SRC
VOL
w
ENTER / BAND
[ ] [ ] [
❚❚
]
■
B
[ ] [
s
]
d
y [ ] [
]
}
{
TOP MENU
[
[
] [
]
]
[
RET
RETURN
[RET]
e
(RETURN)
ENT
DVD MENU
] (ENTER/BAND)
[
]
u
CAR AV
(TOP MENU/DVD MENU)
Note:
[ ], [❚❚], [ ],
[ENT], [RET],
¡
[
]
■
B
are available only on the remote control unit.
¡Switches the power on/off.
¡Changes the modes such as sound and
picture.
¡Adjusts the sound volume.
[SRC]
[+] [–]
q
t
(PWR)
(VOL)
¡Selects or searches for a track, file, sta-
y[]] [[]
¡Stops playback.
¡Pause
[ ]
w ■
tion.
¡Selects (horizontally) or adjusts an opera-
[
[
[
]
]
tion or item.
❚❚
¡Selects (vertically) or adjusts an operation
or item.
[}] [{]
¡Playback
B
¡Goes to beginning.
¡Fast forward/fast reverse.
¡Slow playback ([d]).
] [
]
d
s
¡Selects a band.
¡Shows OSD.
¡Searches for broadcast stations and
memorizes them automatically.
¡Determines an operation or item.
[ENT]
(ENTER/
BAND)
¡Returns to the previous display.
¡Inputs the number again.
¡Displays the VCD’s menu.
[RET]
(RETURN)
e
r
¡Displays the DVD/title menu. (Operations
vary according to the media.)
[
]
u
¡Mutes the sound temporarily.
MUTE
[
]
(TOP MENU/
DVD MENU)
Download from Www.Somanuals.com. All Manuals Search And Download.
13
CQ-VD7005U
Touch Panel Operation Overview
❒ Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel. (apage 47)
Operation
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.
¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
aFailure to observe the above may damage or
break the glass on the surface of the touch
panel.
13
The State of Operation Screen
Example: DVD mode
Note
:
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Volume
Current
Disc indicator (apage 19)
Display Button
indicator mode
(Lights when a disc is loaded)
(anext page)
Clock time (apage 32)
Prohibition
Input is not possible because the user has
attempted to perform an operation which
is not supported by the disc contents.
Source Button
(Content varies with each
source)
Menu Button
Displays the Source Selection Screen.
Displays the Menu Screen.
Source Selection Screen
Menu Screen
Source Selection Screen appears.
Touch desired source button.
Menu Screen appears. Select desired setting.
Menu Setting, (apage 30)
Touch
to quit.
Press [MENU] to let Menu
Screen appear.
Press [SRC] to change to
desired mode.
Note
:
¡The screen above appears when no external
device is connected to AV1, AV2, and the
Expansion Module (CY-EM100U, option).
Download from Www.Somanuals.com. All Manuals Search And Download.
14
CQ-VD7005U
Switching the Display
Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
14
Touching
allows users to switch between screens as follows.
❏ How to Call up Operation Screen
Source
Standard Screen
Operation Screen
Radio
(apage 26)
Disc Player (DVD/VCD (*1)/
CD/MP3/WMA)
(apage 20)
❏ How to Cancel OSD (On Screen Display)
Source
Standard Screen
OSD OFF *2
AV1/AV2 (*1)
(apage 28)
*1 To switch Operation Screen ON, touch the center of touch panel or press
*2 The operation screen is not available in the video mode.
.
[ENTER]
Note:
¡
Refer to the description of each mode for how to operate the operation screen.
Showing the hidden part of the screen.
Some items have continued parts. You can see the continued parts by pressing
or
.
DVD mode
Download from Www.Somanuals.com. All Manuals Search And Download.
15
CQ-VD7005U
General
[VOL]
[OPEN]
[TILT]
ASPECT
ASP
TILT
OPEN
P·MODE
CQ-VD7005U
15
VOL
ENTER
PWR
SRC
MENU
NAVI
MUTE
[]] [[ ]
[MUTE]
[SRC] (PWR: power)
Remote Control Sensor
Preparation: Turn your car’s ignition key to the ACC or ON position.
General Operations
Operations
Power
–
–
[SRC]
[SRC]
Note:
[SRC]
[SRC]
–
ON :
You cannot turn on the power via the
¡
remote control when ACC SELECT is set to
OFF . (
Power
ACC SELECT , page 33)
a
OFF :
Display Open/Close
[OPEN]
–
¡Press once to open. Press again to close.
Note:
¡When the display is opened or closed, a loud beep sounds three times.
¡If the unit stops halfway, press [OPEN] again to draw it all the way out.
¡Opening/closing the display can be done when the power is off.
Source selection
[SRC]
[SRC]
RADIO (AM/FM)
(apage 14)
(apage 26)
(apage 20)
(apage 28)
DVD (DVD/VCD (Video CD)/CD/MP3/WMA)
AV1/AV2
Sources connected to the
Expansion Module (CY-EM100U) *
(aSystem Upgrade
Guidebook)
1
1
* When the Expansion Module (CY-EM100U, option) is connected.
(aSystem Upgrade Guidebook)
Note:
¡
If there is no external sources connected, AV1/AV2 mode can be set
to skip. (apage 39)
……
Touch/Press and hold for more than 2 seconds
Download from Www.Somanuals.com. All Manuals Search And Download.
16
CQ-VD7005U
[SRC] (PWR: power)
[MUTE]
PWR
MUTE
SRC
[+] [–]
VOL
(VOL)
16
ENTER / BAND
ENT
[]] [[]
TOP MENU
RET
RETURN
DVD MENU
CAR AV
General Operations (continued)
Operations
Volume
Note:
¡The sound level for
each source is
stored in memory.
q [+]
w [–]
q Up
w Down
–
w
q
Setting Range: – 82 dB to 0 dB, default: – 40 dB
Note:
¡The volume level can be set independently for each source and each
disc format.
Mutes the sound.
To cancel, press again.
Mute
[MUTE]
–
[MUTE]
[TILT]
–
–
q Press and hold for more than 2 sec-
Tilt Angle
onds.
Press to adjust. Setup is the same as
from MENU. Refer to DISPLAY UNIT
w
[]] or [[]
[]] or [[]
or
for details. ( page 32)
a
Warning
¡Do not touch the unit while the display is moving. Inserting hands, fingers or for-
eign objects into the unit can cause injuries and damage to the unit.
Note:
¡Vertical angle (TILT) is saved in the memory, so when the display is drawn out next, it
is automatically set at the angle and in the position adjusted before.
¡After adjusting its angle, adjust the brightness as well. (apage 34)
¡The car model and installation conditions may impose some restrictions on the
adjustment of the monitor's angle.
To raise the display, press again.
[TILT]
Folding Down the
Display
Temporarily
–
–
Note:
¡Even when the unit power is off, you can fold down the display temporarily.
Caution
¡Avoid physical shock to the monitor.
¡Do not place any object on the display, or subject it to undue force.
¡Do not move the display forcibly.
¡The monitor movable range may be limited by the type of car, the position where
the display is mounted, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
CQ-VD7005U
Before Disc Playback
Discs that can be Played Back
❒ Disc Type
❒ Symbols used on jackets
(Examples of such symbols include)
17
VCD
(Video CD)
DISC
DVD
CD
CD-R/RW
2
¡
¡
¡
: Number of subtitle languages
: Number of audio tracks
: Number of angles
Recordable
ReWritable
2
Mark/logo
Disc Size
TEXT
3
The numbers indicate the number of languages,
tracks, angles, etc., recorded on the disc.
12 cm {5”}
Video
Format
NTSC/PAL
LPCM,
Screen size (H:V aspect ratio)
:
¡
: 4:3 standard size
4 3
LPCM
(CD-DA),
MP3/
MPEG1,
MPEG2,
dts, Dolby
Digital
LPCM
(CD-DA),
dts
LB
¡
: Letterbox (apage 38)
Audio
Format
LPCM,
MPEG1
¡ 16:9 wide size
WMA
:
16 9 LB
LETTERBOX
: Playback in
(letterbox)
Region
No.
format on a standard screen (4:3).
1 (ALL)
:
16 9 PS
PAN & SCAN
: Playback in
(pan and
scan) (apage 38) format on a stan-
dard screen (4:3).
Note:
¡About CD-Rs/RWs and DVD-Rs/RWs, refer to “Notes on
CD-Rs/RWs and DVD-Rs/RWs”. (apage 48)
¡Some copy-protected music CDs are not playable.
Note:
¡
The size of the image that is displayed on the screen
depends on the screen mode (“Aspect Ratio”
a
page
40), and on the screen size for the content on the
disc.
❒ Notes on DVD-Rs/RWs
¡Only video formatted discs are playable. Discs in the
video recording (VR) format are unplayable.
¡Unfinalized discs are unplayable.
❒ Region Management Information
¡Some discs are unplayable depending on the disc
itself, device, drive and software that are used for disc
recording.
This product is designed and manufactured to
respond to the Region Management Information that
is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to
the Region number of this product, this product does
not play the disc.
❒ Discs not supported
The following discs are not played back on this
product.
¡DVD-Audio
¡DVD+R
¡SVCD
¡DVD-ROM
¡DVD+RW
¡VSD
¡DVD-RAM
Example:
The Region number for
this product is “1” and
“ALL”.
1 2
4 6
ALL
1
¡CVD
¡CD-G
¡CD-ROM (except MP3/WMA)
¡CD-RW (except MP3/WMA and CD-DA)
¡CD-R (except MP3/WMA and CD-DA)
¡SACD
¡Photo CD
¡CDV
¡Hybrid SACD (except CD-DA)
¡Divx Video Discs
¡CD-EXTRA (audio-only playback possible)
¡DVDs with a region number other than “1” or
“ALL”
¡Playing back a photo CD disc with this unit could
damage the data that is recorded on the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
CQ-VD7005U
Disc Insert/Eject
■ When a disc is in the player...
18
TILT
CLOSE
Printed side
CQ-VD7005U
TEXT
VOL
[u] (eject)
lights.
ENTER
PWR
SRC
MUTE
MENU
NAVI
Caution
¡When the disc is inserted or ejected, to prevent disc
scratches never exert any downward force on the
disc.
Do not insert a disc when the eject button
because a disc is already loaded.
lights
DVD VCD CD MP3 WMA
DVD VCD CD MP3 WMA
Disc Insert
Disc Eject
¡The mode that supports the disc is selected, and play-
Press [u] to stop playback and eject the disc.
back starts.
(Press [u] again to reload the disc.)
DVD VCD
Note:
¡If you leave a disc in the slot for more than 30 seconds
after its ejection, the disc will be automatically reloaded
after a loud beep is heard three times.
¡The audio format is automatically identified.
(apage 18)
¡When the menu screen appears, see “Chapter/title
Selection” on page 22.
DVD VCD
¡Due to limitations of certain discs, some DVD and
VCD (Video CD) discs may not operate as described
in this manual. Refer to the disc jacket for further
details.
When a disc is in the player, change to disc player
mode (CD, MP3, WMA, DVD or VCD (Video CD)) and
playback starts.
¡This unit does not support DVD and VCD (Video
CD) karaoke functions.
Note:
¡Do not insert a disc when the eject button
lights because a disc is already loaded.
¡The power will be turned on automatically when a disc
is loaded.
¡You can play a disc even if the monitor is closed.
DVD VCD
¡The sound may be interrupted for a few moments
while the audio format is being identified.
Caution
¡Do not use irregularly shaped discs.
¡Do not insert foreign object into the disc slot.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
CQ-VD7005U
Disc Player
Source Button
(
)
Disc Mode DVD Selection
TILT
CLOSE
“
”
Touch Source Button .
q
d
Touch
w
19
(DVD) on the
Source Selection
Screen.
CQ-VD7005U
TEXT
VOL
[SRC]
Press
mode.
to change to the desired
ENTER
PWR
SRC
MUTE
MENU
NAVI
[SRC]
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER]. (Only for Video Mode)
[ENTER]
[]] [[ ]
[}] [{]
Video Mode
VCD (Video CD)
mode display
DVD
mode display
Source Button
Playing time
Source Button
Playing time
Operation Buttons
Operation Buttons
Audio Mode
❒ Folder/File/Track Selection
MP3/WMA
mode display
(Example: MP3 mode)
Source Button Playing time
: Folder
: MP3/WMA file
qTouch
a folder.
,
(folder name) to select
Title/text scroll
: scrolls up/down the file list by
1 page.
,
: scrolls up/down the file list by
1 line.
Operation Buttons
Folder selection
wTouch
(file name) to play.
CD
mode display
qPress []], [[], [}] or [{] to select a
folder.
Source Button Current track
Playing time
[]] [[]: movement among different lev-
els of trees
[}] [{]: movement in the same tree
wPress [ENTER].
Note:
¡It is not possible to display the whole tree and file list
in a folder.
¡The displayed contents on the touch panel vary with
circumstances.
Operation Buttons
Title/text scroll
Download from Www.Somanuals.com. All Manuals Search And Download.
20
CQ-VD7005U
Basic Operations
Operations
Compatible
Discs
Operations
20
DVD VCD
CD
Track/file Selection
Next track/file
[d]
[[]
Beginning of the current track/file
Previous track/file (Touch/press twice.)
[s]
[]]
MP3 WMA
Note:
DVD
¡When playing a DVD, there are cases where it is not possible to return to
the start of a chapter that spans 2 titles. (apage 50)
DVD VCD
CD
Fast forward
Fast Forward/
Fast Reverse
[d]
[[]
Release to resume playback.
Fast reverse
Release to resume playback.
The speed changes if the button is held down as follows.
Regular speed /1.5 times (DVD) /10 times (DVD) /20 times
[s]
[]]
MP3 WMA
DVD VCD
MP3 WMA
CD MP3 WMA
Folder Selection
Next folder
[}]
[}]
Touch
desired
folder
[{]
[{]
Previous folder
Title Scroll
Stop
Scrolls the title once
–
–
DVD VCD
CD
To resume playback, touch/press
[3]
–
/ [5].
MP3 WMA
DVD VCD
Pause
To resume playback, touch/press
again or touch/press
CD
–
[y]
/ [5].
MP3 WMA
¡Touch/press and hold in the pause mode.
Slow Playback
[d]
[[]
Playback is at about 1/3 normal speed.
To resume normal playback, touch/press
/ [5].
DVD VCD
Note:
¡Reverse slow playback is not possible.
DVD VCD
CD
Repeat Play
*
*
–
–
–
To cancel, touch again.
MP3 WMA
Repeat Play within the
Current Folder
To cancel, touch and hold for more
than 2 seconds again.
–
MP3 WMA
CD
Scan Play
–
–
–
To cancel, touch again.
–
–
–
CD
Random Play
*
*
To cancel, touch again.
MP3 WMA
Random Play within the
Current Folder
MP3 WMA
To cancel, touch and hold again.
……
Touch/Press and hold
* Touch panel symbols will change to indicate these current mode.
,
{F= FOLDER (folder)}
Download from Www.Somanuals.com. All Manuals Search And Download.
21
CQ-VD7005U
Disc Player (continued)
To switch Operation Screen ON, touch the center of touch panel or press [ENTER].
Chapter/title Selection
Operations
Compatible
Discs
Operations
21
[DVD MENU]
Showing menu and
selecting an item
qMenu appears.
–
or
or
1
1
[RETURN]
*
*
d
d
d
DVD
VCD
1 Note on VCD:
For VCD, touch/press
[]] [[]
[}] [{]
d
*
[]] [[]
–*2
d
–*2
wSelect the desired item.
1
*
[}] [{]
[RETURN]
/
instead
d
d
eDetermine the setting.
[ENTER] [ENTER]
[DVD MENU]
of
/
.
–
–
[RETURN]
Returns to the previous display.
Note:
[DVD MENU]
When the top menu does not appear even by pressing
¡
,
press and hold the same button for more than 2 seconds.
qToggles “Chapter number input
Starting Playback
from a specific
chapter/title
mode”, “Title number input mode”
and “Number input mode”.
–
–
d
d
Touch the numerical
key to enter a number
directly
wInput desired number.
–
to
–
DVD
d
d
[ENTER]
[ENTER]
ePlayback starts.
Note:
For retrying selection during number entry, touch/press
[RETURN]
/
.
¡
Note:
If no operation is performed for 8 seconds after you have touched
, the operation buttons disappear.
¡
If the title/chapter number is inputted and no operation is performed for 2 seconds, playback will start from the num-
¡
ber of the title/chapter entered.
*2 On-Screen Direct Operation (Only for DVD)
Some DVDs allow you to operate the DVD menu by
touching the screen.
Showing Source button and Menu button
Press . The Source button and Menu button appear.
In such a case, if your targeted button is located too close
to other buttons, a part of the screen may be enlarged in
order that you can press the button for sure.
Source Button
(apage 14)
Menu Button
(apage 14)
Moving operation buttons (Only for DVD)
When the operation buttons interfere with operations,
press . The buttons are transferred as shown below.
Note:
¡When the current disc is not ready for the on-screen
direct operation, perform operations with the buttons
on the remote control or the unit.
¡The on-screen direct operation of the DVD menu is not
available in the DVD changer mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
CQ-VD7005U
DVD
mode display
22
Repeat play DVD menu
Chapter/title selection
Fast forward/fast reverse
Return
Audio Language/
Angle/
Subtitle Language
Play/stop/pause
Useful Function
Operations
Compatible
Discs
Operations
Subtitle Language
–
–
¡Touch during playback.
DVD
It is possible to change the subtitle language during play if multiple lan-
guages are recorded on the disc.
Note:
¡There may be a brief delay before the subtitles appear.
–
–
¡Touch during playback.
Audio Language
Angle
DVD
DVD
It is possible to change the audio language during play if multiple audio lan-
guages are recorded on the disc.
–
–
¡Touch during playback.
For DVDs which contain scenes which have been shot simultaneously from
a number of different angles the same scene can be viewed from each of
these different angles during play. ( ANGLE MARK
page 38)
a
–
–
Stereo & Monaural
It is possible to switch the audio between stereo sound and monaural sound
(L or R).
VCD
: stereo sound
STEREO
d
: the left channel audio is output on both the left and
right speakers.
MONO.L
d
: the right channel audio is output on both the left and
right speakers.
MONO.R
Note:
If no operation is performed for 10 seconds or
is touched, the operation buttons disappear.
¡
It may not be possible to switch the language unless the unit is at the DVD menu ( previous page) or is at the DVD
¡
a
settings. ( page 38)
a
The language on the DVD settings takes priority when the power is turned on or the disc is loaded.
The number of languages and angles depend on the disc. Some discs have only one language/angle or have no lan-
guage/angle.
¡
¡
Download from Www.Somanuals.com. All Manuals Search And Download.
23
CQ-VD7005U
Notes on MP3/WMA
What is MP3/WMA?
Display Information
TM
MP3* (MPEG Audio Layer-3) and WMA (Windows Media
Displayed items
¡CD-TEXT
Disc title
Audio) are the compression formats of digital audio. The
former is developed by MPEG (Motion Picture Experts Group),
and the latter is developed by Microsoft Corporation. Using
these compression formats, you can record the contents of
about 10 music CDs on a single CD (This figure refers to data
recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of
128 kbps and a sampling frequency of 44.1 kHz).
¡MP3 (ID3 tag)
Album name
Title and artist name
23
Track title
¡WMA (WMA tag)
Album name
Title and artist name
¡MP3/WMA
Folder name
File name
*MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
Displayable characters
¡Displayable length of file name/folder name: within 128
characters. (Unicoded file and folder names are reduced by
half in the number of displayable characters.)
¡Name files and folders in accordance with the standard of
each file system. Refer to the instructions of writing soft-
ware for details.
Note:
¡MP3/WMA encoding and CD writing software programs are
not supplied with this unit.
¡ASCII character set and special characters in each language
can be displayed.
¡Some Cyrillic characters in the Unicode can be displayed.
Points to remember when making MP3/WMA files
Common
¡High bit rate and high sampling frequency are recommend-
ed for high quality sound.
¡Selecting VBR (Variable Bit Rate) is not recommended
because playing time is not displayed properly and sound
may be skipped.
ASCII character set
A to Z, a to z, digits 0 to 9, and the following symbols:
(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` {
| } ~
¡The playback sound quality differs depending on the encod-
ing circumstances. For details, refer to the instructions of
your own encoding software and writing software.
Note:
¡With some software in which MP3/WMA format files have
been encoded, the character information may not be dis-
played properly.
MP3
¡It is recommended to set the bit rate to “128 kbps or more”
¡Undisplayable characters and symbols will be converted
and “fixed”.
into an asterisk ( ).
¡It is recommended that the length of the file name is less
than 8 (excluding the file extension).
*
WMA
¡It is recommended to set the bit rate to “64 kbps or more”
and “fixed”.
¡Do not set the copy protection on the WMA file to enable
this unit to play back.
Caution
Windows Media, and the
Windows logo are trademarks,
or registered trademarks of
Microsoft Corporation in the
United States and/or other
countries/regions.
¡Never assign the “.mp3”, or “.wma” file name
extension to a file that is not in the MP3/WMA
format. This may not only produce noise from
the speaker damage, but also damage your
hearing.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
CQ-VD7005U
Recording
R
M
ec
P
o
3
rd
/
i
W
ng
M
M
A
P3
f
/
i
W
le
M
s
A
o
f
n
ile
a
s o
C
n
D
a
-mCD
e
-mdiedia
a
¡You are recommended to minimize the chances of making
a disc that contains both CD-DA files and MP3/WMA files.
¡If CD-DA files are on the same disc as MP3 or WMA files,
the songs may not play in the intended order, or some
songs may not play at all.
¡You may encounter trouble in playing MP3/WMA files or
displaying the information of MP3/WMA files recorded with
certain writing software or CD recorders.
¡This unit does not have a play list function.
¡Although Multi-session recording is supported, the use of
Disc-at-Once is recommended.
24
¡When storing MP3 data and WMA data on the same disc,
use different folders for each data.
¡Do not record files other than MP3/WMA files and unneces-
sary folders on a disc.
¡The name of an MP3/WMA file should be added by rules as
shown in the following descriptions and also comply with
the rules of each file system.
Supported file systems
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,
Romeo
Note:
¡The file extension “.mp3” or “.wma” should be assigned to
each file depending on the file format.
¡Apple HFS, UDF 1.50, Mix CD and CD Extra are not support-
ed.
Compression formats (Recommendation: “Points to remember when making MP3/WMA files” on the previous page)
Compression method
Bit rate
VBR
Yes
Yes
Yes
Sampling frequency
32, 44.1, 48 kHz
16, 22.05, 24 kHz
32, 44.1, 48 kHz
MPEG 1 audio layer 3 (MP3)
MPEG 2 audio layer 3 (MP3)
32 k – 320 kbps
8 k – 160 kbps
Windows Media Audio Ver. 2, 8, 9* 32 k – 192 kbps
* WMA 9 Professional/LossLess/Voice are not supported.
Folder selection order/file playback order
Maximum number of files/folders
Root Folder
1
(Root Directory)
¡Maximum number of files: 511 (file and folders)
¡Maximum number of files in one folder: 255
¡Maximum depth of trees: 8
2
4
q
Folder Selection
3
¡Maximum number of folders: 255 (Root folder is included.)
w
r
1
8
In the order
–
e
File Selection
Note:
In the order
–
5
6
¡You can shorten the duration between data read and play-
back by decreasing the quantity of files or folders, or the
depth of the hierarchy.
q
y
¡This unit counts the number of folders irrespective of the
presence or absence of an MP3/WMA file.
7
t
y
8
¡If the selected folder does not contain any MP3/WMA files,
the nearest MP3/WMA files in the order of playback will be
played.
Tree 1
Tree 2
Tree 3
Tree 4
Tree 8
(Max.)
¡Playback order may be different from other MP3/WMA
players even if the same disc is used.
¡“ROOT” appears when displaying the root folder name.
Copyright
No warranty
It is prohibited by copyright laws to copy, distribute and
deliver copyrighted materials such as music without the
approval of copyright holder except for personal use.
Above description complies with our investigations as of
December 2006. It has no warranty for reproducibility and
displayability of MP3/WMA.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
CQ-VD7005U
Radio
Auto presetting
Radio Mode Selection
Frequency Preset stations
Source Button
“
”
Touch Source Button .
q
TILT
CLOSE
d
Touch
w
25
Band
(RADIO) on the
Source Selection
Screen.
selection
CQ-VD7005U
TEXT
[SRC]
Press
mode.
to change to the desired
VOL
ENTER
PWR
MUTE
SRC
MENU
NAVI
To switch Operation Screen ON, touch
.
1
* List selection
[SRC]
[ENTER]
Tuning
[]] [[ ]
1
* Appears when ALL is selected. ( page 40)
a
Stereo indicator
MENU
RADIO
FM SETUP
AUTO PRESET
EACH
/
ALL
e
e
e
e
Tuning
Operations
2
2
* The displayed contents on the
touch panel vary with circum-
stances.
Band Selection
*
[BAND]
[ENTER]
FM 1
FM 2
FM 3
AM
Preparation:
Select ALL . ( page 40)
a
List Selection
Refer to the next page.
MENU
RADIO
FM SETUP
AUTO PRESET
EACH
/
ALL
e
e
e
e
2
2
*
* The displayed contents on
the touch panel vary with
circumstances.
[BAND]
[ENTER]
3
LIST 1
LIST 2
LIST 3
AM
*
There are 6 stations in each list. You can call up next 6 stations by switching from one
list to another.
3
* From the touch panel, you can toggle only Lists 1-3, but not AM . To change to AM
,
touch
.
[
[
]
]
[
[
]
]
Up
[
[
Station
Selection
Down
]
]
Seek Tuning
[
[
]
]
[
[
]
]
Up
[
[
Down
]
]
Touch/press and hold for more than 0.5 second then release. Seeking starts.
Touch/Press and hold
……
Download from Www.Somanuals.com. All Manuals Search And Download.
26
CQ-VD7005U
Preset Memory
Select a band and frequency.
Manual Preset
Memory
Up to 6 stations can be
preset in each band.
26
to
–
–
blinks once
¡Touch and hold for more than 2 seconds.
¡The frequency blinks once, and a receiving station is saved in the memory.
New stations overwrite existing saved stations.
Preparation:
Select EACH . ( page 40)
a
Auto Preset
Memory
MENU
RADIO
FM SETUP
AUTO PRESET
EACH
/
ALL
e
e
e
e
Select a band.
[BAND]
A
Six stations are automati-
cally preset in each band.
6 stations with first to 6th highest in signal
strength of each band will be preset.
[ENTER]
¡Touch/press and hold for more than 2 seconds.
¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)
New stations overwrite existing saved stations.
Preparation:
Select ALL . ( page 40)
a
B
In total 18 FM stations are
automatically preset.
MENU
RADIO
FM SETUP
AUTO PRESET
EACH
/
ALL
e
e
e
e
18 stations with first to 18th highest in signal
strength of all FMs will be preset at once.
[ENTER]
[BAND]
¡Touch/press and hold for more than 2 seconds.
¡Once set, the preset stations are sequentially scanned for 5 seconds each. (scanning)
New stations overwrite existing saved stations.
Select a band or a list.
Preset Station
Calling
to
–
–
¡Touch desired preset button.
Preparation:
Select ALL . ( page 40)
a
Preset Swap
MENU
RADIO
FM SETUP
AUTO PRESET
EACH
/
ALL
e
e
e
e
A station preset is inter-
changeable with another
station preset.
qSelect the list and the preset number that contains the station to be interchanged
(see “Preset station calling” above).
w Select the list and hold down the preset number that contains the targeted channel
for more than 2 seconds.
The preset station selected in the step qis
interchanged with the targeted preset chan-
to
–
–
nel selected in the step w(Preset Swap).
……
Touch/Press and hold
Download from Www.Somanuals.com. All Manuals Search And Download.
27
CQ-VD7005U
AV1/AV2
Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
Preparation:
¡Connect an optional external device to the AV1/AV2.
27
Source Button
AV Mode Selection
TILT
CLOSE
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
“
”
Touch Source Button .
q
d
Touch
/
w
(AV1/AV2) on the
Source Selection
Screen.
CQ-VD7005U
TEXT
VOL
ENTER
PWR
SRC
MUTE
MENU
NAVI
[SRC]
[SRC]
Press
mode.
to change to the desired
[ENTER]
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER].
Note:
You can set up the system so that the AV mode is not
¡
selected (source skip). ( page 39) (AV set to NAVI
a
INPUT is not skipped even if SOURCE SKIP is set to
ON .)
If no operation is performed for 10 seconds or
¡
touched, the operation buttons disappear.
is
AV terminal is not used for the Panasonic car
navigation system (available in future). Refer to
¡
NAVI SETUP for setting. ( System Upgrade
a
Guidebook)
Download from Www.Somanuals.com. All Manuals Search And Download.
28
CQ-VD7005U
28
Download from Www.Somanuals.com. All Manuals Search And Download.
29
CQ-VD7005U
Settings
Preparation:
To display menu in French, Execute MENU DISPLAY (Language setting). ( page 33)
a
USER
DISPLAY UNIT
CLOCK
ID-CODE
MEMORY CLEAR
OTHER
User
Display adjustment
Clock setting
ID Code Setting
Memory clearance
Other settings
(a
(a
(a
(a
(a
page 32)
page 32)
page 32)
page 33)
page 33)
29
SCREEN
DIMMER
PICTURE
Screen
Adjusting the brightness
Display appearance
(
(
a
a
page 34)
page 34)
AUDIO
Audio
SOUND SETUP
GRAPHIC-EQ
CS Auto
SP SETUP
SP LEVEL
TIME ALIGNMENT
SOURCE LEVEL
CROSS OVER
Sound setting
Setting and adjusting of graphic equalizer
CS Auto setting
Setting of the absence/presence of each speaker
Adjusting the output balance of each speaker
Delay time setting of each speaker
Setting the AV1/AV2 input level
Cut off frequency
(a
(a
(a
(a
(a
(a
(a
(a
page 34)
page 34)
page 35)
page 36)
page 36)
page 37)
page 37)
page 37)
DVD
LANGUAGE
DISPLAY
DVD SOUND
MULTI-CH
DVD
Language Setting
Appearance of DVD image
DVD sound setting
Sound output selection
(a
(a
(a
(a
page 38)
page 38)
page 39)
page 39)
INPUT/OUTPUT
NAVI SETUP
CAMERA SETUP
SOURCE SKIP
INPUT SELECT
OUTPUT SELECT
H-F SETUP
Input/output
Navigation setting
Rear view camera setting
Source skip
Input selection
Output selection
Hands-free setting
(*1)
(*1)
page 39)
(*1)
(*1)
(*1)
(a
RADIO
FM SETUP
AM SETUP
XM SETUP
SIRIUS SETUP
Radio
Setting for FM stations
Setting for AM stations
Setting for XM radio
Setting for Sirius satellite radio
(
(
a
a
page 40)
page 40)
(*1)
(*1)
(*1) Please refer to the System Upgrade Guidebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
CQ-VD7005U
❏ MENU Operation
(Example: DVD mode)
q
30
w
Touch desired setting.
Touch
in Operation Screen.
e
(Example: setting screen of “DISPLAY UNIT” apage 32)
Determines the setting and goes back to the pre-
vious menu out of the menu.
Determines the setting and gets out of the menu.
Note:
¡The display returns to the previous status if there is no operation for more than 60 seconds after changing to the
setting menu.
CQ-VD7005U
TEXT
VOL
ENTER
PWR
RC
S
M
E
NU
NAVI
MUTE
[SRC]
(Exit from the
menu)
[MENU]
(Shows the menu display/
Goes back to the previous
menu)
[ENTER]
(Determine)
[]] [[ ]
[}] [{]
(Select/adjust)
Download from Www.Somanuals.com. All Manuals Search And Download.
31
CQ-VD7005U
Settings (continued)
USER
SCREEN AUDIO
DVD
INPUT/OUTPUT RADIO
DISPLAY UNIT
ID-CODE
31
Display adjustment
ID Code Setting
Prior to operating this unit, it is advisable to assign a 4-
digit ID code for security. Once the ID code has been set,
the unit cannot be operated if the main power supply is
disconnected then re-connected. It is electronically locked
so that a thief cannot use the stolen unit unless that per-
son knows the code you have set.
(Tilt angle adjustment)
TILT
1
2
3
4
5
1
5
The ID code operation must be performed only by the
person to whom the unit belongs.
default:
5
Generally, it is not necessary to enter the ID code each
time when using the unit if it has not been disconnected
from the main power supply (car battery).
(Monitor setting when power on)
OPEN/CLOSE
AUTO
: the monitor is opened automatically
when turning ON ACC.
0
9
to
4 digits numeric code
MANUAL
: the monitor is not opened automatically.
default: MANUAL
default: none
How to set your ID code (for the first time)
q Enter a 4 digit ID code.
w Enter the same 4 digit ID code again.
Note:
¡The monitor position setting menu can also be dis-
played by pressing the [TILT] button on the main unit
for more than 2 seconds. (apage 17)
How to change your ID code
q Enter the preset (old) 4 digit ID code. If the wrong ID
code is entered, a new ID code cannot be registered.
w Enter a new 4 digit ID code.
CLOCK
Clock setting
e Enter the new 4 digit ID code again.
How to cancel the known ID code
(Clock display)
DISPLAY
Enter the preset (old) 4 digit ID code. If the wrong ID
code is entered, it is not possible to cancel the ID code
function.
q
ON
: clock display ON (“12:00” is displayed
before adjusting the clock.)
Touch and hold
until “COMPLETED!” is dis-
w
played. The ID code cancelling procedure is completed.
The unit now works without an ID code.
OFF
: clock display OFF
default: OFF
Note:
¡Should your unit ever require service, cancel your ID
code before sending for repair.
¡The ID code setting cannot be eliminated even by the
memory clear function.
¡The inputted code is not displayed for your security.
(Hour adjustment)
HOUR ADJUST
]
: puts back hour.
[
: puts forward hour.
(Minute adjustment)
MINUTE ADJUST
Caution
]
: puts back minute.
¡Record your registered ID code and keep it in a
secure location. (Fill in the ID code memo (a
page 46).) If you forget it, you will be unable to use
the unit. In case you forget the ID code, please
consult your nearest Panasonic Servicenter.
[
: puts forward minute.
Note:
[SRC]
/ .
To start the clock, touch/press
¡
Set the Daylight Saving Time manually.
¡
default: HOUR ADJUST: 12
MINUTE ADJUST: 0
Download from Www.Somanuals.com. All Manuals Search And Download.
32
CQ-VD7005U
(Setting ACC selection ON and
OFF)
ACC SELECT
MEMORY CLEAR
32
Memory clearance
ON
: sets to ON if your car has ACC position.
The state of all of the current memories are returned to
default settings.
OFF
: sets to OFF if your car has no ACC posi-
tion.
Note:
¡The ID code is not deleted by executing memory clear.
default:
ON
Note:
: clears the memory to default settings
YES
NO
For an ACC-equipped car, select ON. The following
functions are available.
¡
: no memory clear.
The display returns to the previous one.
The power is turned on automatically when inserting
a disc or magazine.
¡
OFF selection disables turning on the power of the
main unit through the remote control.
¡
REALLY? appears when
YES is selected.
Caution
¡Be sure to select OFF when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
: proceed.
OK
: no memory clear.
CANCEL
OFF
ACC
Caution
IGN
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
(Remote control setting)
REMOTE CONTROL
FRONT
REAR
: main unit-specific remote control
OTHER
: rear monitor (option)-specific remote
control
Other settings
(Beep setting)
BEEP
default: FRONT
ON
: operation sound (beep) ON
: operation sound (beep) OFF
(Language setting)
MENU DISPLAY
OFF
default: ON
ENGLISH
FRENCH
: displays the menu in English.
: displays the menu in French.
default: ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
33
CQ-VD7005U
Settings (continued)
SCREEN
AUDIO
USER
AUDIO DVD
INPUT/OUTPUT RADIO
USER SCREEN
DVD
INPUT/OUTPUT RADIO
(Display)
SOUND SETUP
DIMMER
Sound Set Up
33
Adjusting the brightness
(Sound effect setting)
SOUND EFFECT
: automatically adjusted according to
ambient light intensity.
AUTO
THROUGH
GEQ
: no GEQ or CS Auto setting
: goes to GEQ setting
1
2
3
4
Darker
Brighter
CS Auto
: goes to CS Auto setting
default: AUTO
default: THROUGH
(Graphic-equalizer)
PICTURE
GRAPHIC-EQ
Display appearance
CONTRAST
]
Graphic-equalizer
Six EQ presets are already provided at shipment in this
unit. To recall a preset memory, select the correspon-
ding preset buttons [1] to [6].
(Adjust the image contrast)
: decreases the contrast between black and white.
: increases the contrast between black and white.
1
2
3
4
5
6
: (Flat) flat frequency response
: (Rock) speedy and heavy sound
: (Pop) wide-ranged and deep sound
: (Vocal) clear sound
[
(Adjust the image brightness)
BRIGHT
]
[
: (Jazz) jazz-specific deep sound
: (Club) club and disco-specific sound
: darkens.
: lightens.
You may set your own EQ or modify factory preset-
tings in each memory button by following the instruc-
tions below:
(Adjust the image color depth)
COLOR
]
[
Adjusting level of each preset
: lightens the depth of color on the display.
: deepens the depth of color on the display.
The level of each of the 7 frequency bands can be
adjusted.
Select the preset number that you prefer to adjust.
q
[
][
]
Touch/press
quency.
/
to adjust each fre-
w
{ }
(Adjust the image tone or tint)
TINT
Touch/press the same preset number for more than
2 seconds.
e
]
[
: emphasizes red in the color image.
: emphasizes green in the color image.
Frequency band
60 160 400 1 k 3 k 6 k 16 k
(Hz)
Adjustment range: –12 dB to +12 dB (in 2 dB steps)
default: 0 dB for each band
Note:
The new level adjustment will overwrite the previous
¡
level adjustment.
For resuming the factory settings, touch and hold
¡
(INIT (initialize)) for more than 2 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
CQ-VD7005U
To set the level to flat, touch and hold
for more than 2 seconds.
(flat)
¡
(TruBass Setting)
TruBass
34
Expectable effects vary with the audio format to be
¡
used, settings in the menu, and other factors.
(Applies to the front speakers)
FRONT TruBass
[
: more
]
: less
(Applies to the rear speakers)
(Applies to the Sub-woofer)
REAR TruBass
[
: more
]
: less
CS Auto
SUB-W TruBass
CS Auto Setting
[
: more
(Customizing the setting)
(Raises the sound image)
SELECT
]
: less
FOCUS
Setting range: off, +1 to +10
default: off
(Raises the front sound image)
(Raises the rear sound image)
(Raises the central sound image)
FRONT FOCUS
Note:
¡TruBass®
[
: more
TruBass is an audio technology to which the technique of
bass sound reproduction used in pipe organs is electri-
cally applied, and in which an equalizer is not used at all
and bass sound from the speakers to be used is richly
reproduced.
]
: less
REAR FOCUS
[
: more
]
: less
(Adjusts the SRS effect)
Mixing
CENTER FOCUS
FRONT TO REAR Mixing (Adjusts the SRS effect (front)
on rear speakers)
[
: more
[
: more
]
: less
]
: less
Setting range: off, +1 to +10
default: off
CENTER TO REAR Mixing (Adjusts the SRS effect (center)
Note:
¡FOCUS®
on rear speakers)
Focus is an audio technology that moves the sound
image of playing sound vertically to reproduce the
sounds of instruments and voices clearly.
[
: more
]
: less
Setting range: off, +1 to +10
default: +5
Download from Www.Somanuals.com. All Manuals Search And Download.
35
CQ-VD7005U
Settings (continued)
(AUDIO continued)
(Phase setting)
PHASE
(Speaker set up)
SP SETUP
35
Setting the absence/presence and size of each speaker
: subwoofer phase 0 degree
0°
(Front speaker setting)
: subwoofer phase 180-degree inverted
180°
FRONT
Note:
This setting is feasible only when SUB-W is set to
: for small speakers, or when bass playback
is not possible
SMALL
¡
YES
.
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
LARGE
default:
0°
default:
LARGE
(Speaker level)
SP LEVEL
(Center speaker setting)
CENTER
Adjusting the output balance of each speaker
(Left front speaker output bal-
ance)
: when not using a center speaker
NONE
FRONT L
: for small speakers, or when bass playback
is not possible
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
SMALL
]
]
]
]
]
]
[
: down,
: up
: up
: up
: up
: up
: up
LARGE
(Center speaker output bal-
ance)
CENTER
default:
NONE
[
: down,
* A center speaker (option, EAB-CF2 recommended) is
required.
(Right front speaker output
balance)
FRONT R
(Surround speaker setting)
SUR
[
: down,
(Right surround speaker out-
put balance)
: when not using a surround speaker
NONE
¡
R SUR
: for small speakers, or when bass playback
is not possible
: for large speakers, when bass playback is
possible (at least 100 Hz or lower)
SMALL
[
: down,
LARGE
(Left surround speaker output
balance)
¡
L SUR
default:
LARGE
[
: down,
(Subwoofer speaker output
balance)
(Subwoofer speaker setting)
: when using a subwoofer
: when not using a subwoofer
SUB - W
SUB - W
[
YES
NO
: down,
Setting range: –10 dB to +10 dB (1 dB steps)
default: 0 dB for all speakers
default:
NO
If the speaker setting is
test signal is not output and that speaker cannot be
selected.
¡Turn rotary volume controller or
(VOL) to adjust the volume of the test signal.
or
for a speaker, the
NO
¡
NONE
* A subwoofer (option, CJ-SW3003 recommended) is
required. A power amplifier (option) is also required for
connecting a subwoofer.
[+] [–]
or
press
Note:
While the private mode is active, only
¡
FRONT
can be
adjusted.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
CQ-VD7005U
Note:
While the private
mode is active, only
¡
SOURCE LEVEL
36
Setting the AV1/AV2 input level
FRONT L
and
Make this setting if it is not possible to adjust the volume
through the connected device (on the output side).
FRONT R
can be
adjusted.
(Setting for AV1)
AV1 LEVEL
(Test tone output)
TEST TONE
: sets the level low/sound volume increases.
LOW
HIGH
ON
: enables the test tone.
: disables the test tone.
: sets the level high/sound volume decreases.
default: HIGH
OFF
default:
OFF
(Setting for AV2)
AV2 LEVEL
When the test tone is set to on, test signal (a continu-
ous tone) is output from each speaker for approximately
2 seconds.
Adjust the output balance so that the tone appears to
have the same volume from each speaker.
¡
: sets the level low/sound volume increases.
: sets the level high/sound volume decreases.
LOW
HIGH
Note:
If the input level from AV1/AV2 is too high, the audio
¡
Adjusting the output balance:
will not be output normally.
Adjust the volume of all of the other speakers to the vol-
ume level of the speaker from which the test signal
appears to be the quietest.
After setting the input level
¡
[+] [–]
or
The volume can be adjusted by pressing
(VOL) on the remote control or turning rotary volume
controller on the unit.
TIME ALIGNMENT
default: HIGH
Adjusting the timing with which the audio from each
speaker reaches the listener’s position
(Center speaker delay time set-
CROSS OVER
CENTER
ting)
Cut off frequency
]
[
: down,
: up
(Sub-woofer Low Pass Filter)
LPF CUT OFF
Setting range: 0 ms to 5 ms (1 ms steps)
1 ms = 0.001 seconds
]
[
: down,
: up
default: 0 ms
Setting range: 63 Hz to 200 Hz
default: 125 Hz
(Surround speaker delay time
setting)
SUR
(High Pass Filter)
]
[
HPF CUT OFF
: down,
: up
Setting range: 0 ms to 15 ms (1 ms steps)
]
[
: down,
: up
1 ms = 0.001 seconds
default: 0 ms
Setting range: off, 63 Hz to 200 Hz
default: off
Make this adjustment while listening to sound.
¡
If the speaker setting is NONE for a speaker, that
¡
Note:
speaker cannot be selected.
This setting is not available if CS Auto is set to ON
HPF CUT OFF is enabled only on the front speakers
(R/L) and rear speakers (L/R).
.
¡
¡
When “PRO LOGIC” is displayed, 15 ms are automatically
¡
added to the delay time setting for the surround speakers.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
CQ-VD7005U
Settings (continued)
DVD
USER
SCREEN AUDIO
INPUT/OUTPUT RADIO
LANGUAGE
DISPLAY
Language Setting
Display aspect and DVD software mode
(Display aspect setting)
37
(DVD menu language)
MENU
DVD ASPECT
: English
: French
: Spanish
: plays a video in 4:3 screen.
: plays a video in wide screen (16:9).
default: WIDE
ENG
FRA
SPA
NARROW
WIDE
: other language. Input the language code.
OTHER
(apage 49)
(DVD software mode)
LETTER BOX
default: ENG
: plays wide-screen video in Pan & Scan
mode (in which the left and right edges
of the screen are cut off).
: plays wide-screen video in letterbox
mode (in which black bands appear at
the top and bottom of the screen).
PAN & SCAN
(Subtitle language)
SUBTITLE
Note:
LETTER BOX
¡A disc supporting closed captioning and subtitles may
overlap each other on the screen. In this case, turn the
subtitle off.
: English
: French
: Spanish
ENG
FRA
SPA
default: PAN & SCAN
Note:
Set the software setting according to the symbol used
¡
¡
¡
on jacket. ( page 18)
a
: other language. Input the language code.
(apage 49)
OTHER
DVD software mode setting is ignored if PAN & SCAN
or LETTER BOX is already set in the software.
Screen aspect of the display unit is changed according
default: ENG
to the aspect ratio setting ( page 40) and DVD soft-
ware’s aspect.
a
(Audio language)
AUDIO
Note:
¡These adjustments being executed, playback will start
from the beginning of a disc.
(AV-OUT terminal setting)
TV TYPE
: sets NTSC in accordance with the
equipment connected to AV-OUT.
: sets PAL in accordance with the equip-
ment connected to AV-OUT.
NTSC
PAL
: English
: French
: Spanish
ENG
FRA
SPA
: other language. Input the language code.
(apage 49)
OTHER
default: NTSC
default: ENG
(Angle mark setting)
ANGLE MARK
The angle mark is displayed to indicate the parts where
multi-angle data is recorded.
: activates angle mark.
: inactivates angle mark.
ON
OFF
default: ON
Download from Www.Somanuals.com. All Manuals Search And Download.
38
CQ-VD7005U
INPUT/OUTPUT
USER
SCREEN AUDIO DVD
RADIO
(Navigation set up)
DVD SOUND
NAVI SETUP
DVD sound setting
(aSystem Upgrade Guidebook)
38
(5.1 channel listening in Dolby
surround sound)
PRO LOGIC
CAMERA SETUP
(aSystem Upgrade Guidebook)
: activates Pro Logic.
: inactivates Pro Logic.
ON
OFF
SOURCE SKIP
Source skip
default: OFF
(AV1 skip)
AV1 SKIP
Note:
This setting is enabled only in the DVD/VCD/CD player
mode.
¡
If AV1 is not used, the AV1 mode is skipped when chang-
ing the mode.
ON selection in some audio settings may disable
¡
: skips AV1
ON
audio output from the subwoofer.
: does not skip
OFF
(To use the down mix function,
specify the type.)
DOWN MIX
default: OFF
: simple stereo down mix
(Lo = Left only, Ro = Right only)
Lo/Ro
Lt/Rt
(AV2 skip)
AV2 SKIP
If AV2 is not used, the AV2 mode is skipped when chang-
ing the mode.
: surround element decodable down mix
(Lt = Left total, Rt = Right total)
Note:
: skips AV2
ON
This function is available only when “Dolby Digital” or
“dts” source is playing and when sound comes out
¡
: does not skip
OFF
only from the front speakers adjusted with
.
SP SETUP
default: OFF
Note:
default: Lt/Rt
When external devices are connected to this unit with-
¡
out involving the Expansion Module (CY-EM100U,
option),
is not enabled because the con-
AV2 SKIP
(Dynamic Range Compression)
DR COMP
nected external devices are identified as AV2.
Maintaining the ambience even while listening at a low
volume level
INPUT SELECT
(aSystem Upgrade Guidebook)
Compression style selecting
: DR COMP ON
STD
MIN
OUTPUT SELECT
: made with the greatest compression,
roughly equivalent to a TV broadcast.
(aSystem Upgrade Guidebook)
H-F SETUP
: DR COMP OFF
OFF
(aSystem Upgrade Guidebook)
default: OFF
(Multiple channel)
MULTI-CH
Sound output of Dolby Digital 2 ch. from all speakers
: changes sound from 2 ch. to 5.1 ch.
: keeps the source output 2 ch. sound.
ON
OFF
default: OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
39
CQ-VD7005U
Settings (continued)
RADIO
Other Settings
USER
SCREEN AUDIO DVD INPUT/OUTPUT
❑ Aspect Ratio
FM SETUP
39
Setting for FM stations
Default: NORMAL
Mode: 4 types
(FM IF filter switching)
NOISE SUPPRESSION
Press and hold [ASP] on the main unit to change the
aspect ratio as follows.
AUTO
: adjusted automatically
NARROW
: narrows the frequency bandwidth to be
received to prioritize noise reduction.
[ASP]
WIDE
: widens the frequency bandwidth to be
received to prioritize sound quality.
TILT
CLOSE
default:
AUTO
(Auto preset setting)
AUTO PRESET
CQ-VD7005U
TEXT
VOL
EACH
ALL
: saves the preset stations in each band.
ENTER
PWR
MUTE
SRC
MENU
NAVI
: saves the preset stations in all FM lists
regardless of band.
default:
EACH
NORMAL
¡The conventional display
image has a 4 to 3 ratio of
horizontal to vertical.
¡In this case, a blank area
remains on the right and left
sides of the display.
AM SETUP
Setting for AM stations
(Noise suppression)
NOISE SUPPRESSION
FULL
: narrows the frequency bandwidth to be
received to prioritize noise reduction.
NARROW
¡The screen is extended hori-
zontally as a whole to the
aspect ratio of 16 to 9.
¡The extension ratio is the
same at any point of the
screen.
: goes between NARROW and WIDE
.
MID
: widens the frequency bandwidth to be
received to prioritize sound quality.
WIDE
ZOOM
default:
MID
¡The screen is fully extended at
the normal aspect ratio of 4 to
3.
¡The top and bottom of the
screen are slightly cut.
XM SETUP
(aSystem Upgrade Guidebook)
SIRIUS SETUP
JUST
(aSystem Upgrade Guidebook)
¡The screen is extended hori-
zontally to the aspect ratio of
16 to 9.
¡The extension ratio increases
toward the right and left ends
of the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
CQ-VD7005U
❑ Private Mode
Note:
40
You can mute the sounds from the rear speakers if nec-
essary. Activation of the private mode allows you to enjoy
the front monitor and rear monitor (e.g. CY-VHD9401U)
independently with different sources at the same time.
¡This adjustment is common to video mode.
¡
You cannot change the aspect in the menu screen and a
screen in the CD, MP3/WMA, radio and CD changer
mode. These are fixed to “FULL” as well as a Navigation
Image.
Default: Private mode off
¡When the rear view camera is in operation with the
transmission gear shift in the reverse position, the
image is shown on the “FULL” screen only.
¡In some cases, the picture looks different from the
original one due to your selection of aspect.
“P • MODE” indicator
lights when the
Private Mode is acti-
vated.
Caution
¡This is to remind you that compression or extension
of the screen using the aspect ratio (screen mode)
changing function of this product for commercial
purpose of profit making or viewing/listening by the
public could infringe on the rights of the author pro-
tected by the copyright law.
¡If you expand normal picture (4 to 3) by using
“JUST”, “ZOOM” or “FULL” aspect to the full of the
screen, you might not see the periphery of the pic-
ture, or you might see a distorted picture.
Press and hold [ASP] on the main unit for more than 2
seconds to activate the private mode function or inacti-
vate it in turn.
Note:
Be sure to set to OFF when you do not use the private
¡
mode.
It is not possible to choose and set the
¡
(CS
CS Auto
Auto Setting) ( page 35) and
a
TIME ALIGNMENT
(speaker delay) ( page 37) on the sound setting
a
Therefore, use the “NORMAL” mode to see the orig-
inal picture as the author intended it.
menu while private mode is active.
Private mode
Private mode
Off
On
Radio
Radio
It is recommended
to use optional
Over-head Monitor
(CY-VHD9401U)
and headphones
supplied to
DVD
DVD
Radio
Mute
CY-VHD9401U.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
CQ-VD7005U
Troubleshooting
❑ If You Suspect Something Wrong
Warning
Check and take steps as described below.
¡Do not use the unit in an irregular condi-
tion, for example, without sound, or with
smoke or a foul smell, which can cause
ignition or electric shock. Immediately stop
using the unit and consult your dealer.
¡Never try to repair the unit by yourself
because it is dangerous to do so.
If the described suggestions do not solve the problem, it is rec-
ommended to take the unit to your nearest authorized Panasonic
Servicenter. The product should be serviced only by qualified per-
sonnel. Please refer checking and repair to professionals.
Panasonic shall not be liable for any accidents arising out of neg-
lect of checking the unit or your own repair after your checking.
Never take measures especially those other than indicated by
italic letters in “Possible Solution” described below because
those are too dangerous for users to handle themselves.
41
■ Common
Possible cause
Possible solution
Problem
a
The power cord (battery, power and ground) is connected in the wrong way.
aCheck the wiring.
No power to the unit
Fuse blows out.
aEliminate the cause of fuse blowout and replace the fuse with new one.
Consult your dealer.
MUTE is set to ON.
aSet MUTE to OFF.
Sound is not
generated.
The wiring of speaker lines is not correct, or a break or poor contact arises.
aCheck the wiring in accordance with the wiring diagram. (Installation
Instructions)
There is an electromagnetic-wave generator such as a cellular phone near the unit
or its electrical lines.
aKeep the electromagnetic-wave generator such as a cellular phone away
from the unit and the wiring of the unit. In case noise cannot be eliminated
due to the wiring harness of the car, consult your dealer.
Noise
The contact of the ground lead is poor.
aMake sure that the ground lead is connected to an unpainted part of the
chassis securely.
Alternator noise comes from the car.
aChange the wiring position of the ground lead.
aMount a noise filter.
Noise is made in step
with engine revolutions.
Some operations are not executable in particular modes such as menu mode
aRead the operating instructions carefully and cancel the mode. If the unit is
still out of order, consult your dealer.
Some operations are not
executable.
There is a break, a short circuit, poor contact or wrong wiring regarding the
speaker wiring.
aCheck the speaker wiring.
No sound from
speaker(s)
Download from Www.Somanuals.com. All Manuals Search And Download.
42
CQ-VD7005U
■ Common (continued)
The speaker channels
are reversed between
right and left.
The speaker wiring is reversed between right and left.
aPerform the speaker wiring in accordance with the wiring diagram.
42
The power of the unit
fails unintentionally.
The safety device works.
aConsult your dealer, or your nearest Panasonic Servicenter.
■ Radio
Antenna installation or wiring of antenna cable is faulty.
aCheck whether the antenna mounting position and its wiring are correct. In
addition, check to see whether the antenna ground is securely connected to
the chassis.
Poor reception or noise
No power is supplied to the antenna amplifier (when using a film antenna, etc.).
aCheck the wiring of the antenna power lead.
The number of auto
preset stations is less
than 6.
The number of receivable stations is less than 6.
aMove to an area where receivable stations number is maximum, and try pre-
setting.
The contact of the battery lead is poor, or the battery lead is not always powered.
aMake sure that the battery lead is connected securely, and preset stations
again.
Preset stations cannot
be stored.
■
CD
The disc is inserted upside down.
aInsert a disc correctly.
No playback or disc
ejected
There is a flaw or foreign object on the disc.
aRemove the foreign object, or use a flawless disc.
There is a flaw or foreign object on the disc.
aRemove the foreign object, or use a flawless disc.
Sound skipping or noise
The unit is not sufficiently secured.
aSecure the unit to the console box.
Sound skipping due to
vibration
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
aPress and hold the [u] for more than 10 seconds (disc forced ejection). In
case that the disc forced ejection does not work, consult your dealer.
Disc unejectable
The microcontroller in the unit operates abnormally due to noise or other factors.
aUnplug the power cord and plug it again. In case the unit is still out of order,
consult your dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
CQ-VD7005U
Troubleshooting (continued)
■ MP3/WMA
The disc has unplayable formatted data.
No playback or disc
aRefer to the description about MP3/WMA for playable sound data except CD-
ejected
DA (i.e. music CD).
43
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are playable
on other devices such as a PC.
aMake CD-R/RWs in a different combination of media, recording software
and recorder after referring to the description about MP3/WMA.
The CD-R/RWs that are
playable on other
devices are not playable
on this unit.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc. For MP3/WMA, refer to
the description about MP3/WMA.
Sound skipping or noise
Playing VBR (Variable Bit Rate) files may cause sound skipping.
aPlay Non-VBR files.
Note:
¡Refer to “Notes on MP3/WMA” (apage 24)
■
DVD
¡It is not possible to switch if the disc does not have multiple audio
Cannot switch the audio
language/subtitle
languages/subtitle languages/angles recorded on it. (Refer to the guide provid-
ed with your disc.)
¡Some discs permit switching through a menu screen.
¡Sometimes, switching angles is possible only with certain scenes.
language/angle.
The audio/subtitle
language selected in the
DVD settings is not
used.
If audio or subtitles in that language are not recorded on the disc, the audio or
subtitles do not switch to that language. (Some discs permit switching through a
menu screen. Refer to the guide provided with your disc.)
The disc is still unfinalized.
aFinalize the disc.
Refer to “Before Disc Playback” (apage 18) or “Notes on Discs”
(apage 48) for other cases.
A DVD–R or DVD–RW is
not playable.
The disc is in the video recording (VR) format.
aPlay video formatted discs.
Refer to “Before Disc Playback” (apage 18) or “Notes on Discs”
(apage 48) for other cases.
■
Display Settings
AUTO
dimmer is selected.
The brightness of the
screen is not stable.
Select one of the dimmer levels from among 1 to 4 to make the dimmer
a
adjustment become free from light intensity.
The picture is dark. The
picture is whitish. Something
is wrong with the picture.
The picture is light in color.
The screen is not adjusted properly.
aMake every adjustment of the screen.
The display does not go
back into the unit.
The monitor stops on the way to the home position.
aPress [OPEN] (CLOSE).
Download from Www.Somanuals.com. All Manuals Search And Download.
44
CQ-VD7005U
■
Remote Control Unit
The battery is inserted in the wrong direction. A wrong battery is inserted.
aInsert a correct battery in the correct direction.
The battery is weak.
aReplace the battery with new one.
44
The aiming direction of the remote control unit is wrong.
aAim the remote control unit at the sensor of the unit and press buttons.
No response to pressing
buttons
The sensor is exposed to direct sunlight. (The remote control unit may not be
operable when the sensor is exposed to direct sunlight. In such a case, the sys-
tem is not faulty.)
aBlock off sunlight to the sensor.
REAR is selected for the remote control setting.
FRONT
Select
for the remote control setting.
a
Unable to turn on the
power of the main unit
through the remote
control
OFF is selected for the ACC selection.
Select ON for the ACC selection.
a
a
Press [SRC] (PWR) of the main unit to turn on the power.
■
Sound Settings
No sound from left,
right, front, or rear
speaker.
Cables are not correctly connected.
aConnect the cables correctly.
Left and right sounds are
reversed.
The speaker leads are connected in reverse between right and left.
aConnect the speaker wires to the correct one.
No sound on the
speaker.
The speaker setting is NO or NONE .
aSet it correctly.
Playing back a disc having a subwoofer channel
NO
YES
Subwoofer is set to
in the speaker setting.
.
.
¡
¡
¡
Set subwoofer to
a
No sound from the
subwoofer
ON
Private mode is set to
OFF
Set private mode to
.
a
ON
Pro Logic is set to
.
OFF
Set Pro Logic to
a
.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
CQ-VD7005U
Troubleshooting (continued)
❑ Error Display Messages
■ CD/MP3/WMA/DVD/VCD (Video CD)
45
Display
Possible cause
Possible solution
a
Disc is dirty, or is upside down.
aCheck disc.
NON PLAYABLE DISC
Disc has scratches.
aCheck disc.
No operation by some cause.
aPress [u]. If failure persists, press the reset switch. If normal operation is not
restored, call the store where you purchased the unit or the nearest Panasonic
Servicenter.
MECHANISM ERROR
The type of the file that is selected is not supported.
FILE ERROR
PROTECTED
NO DISC
aCheck disc.
A WMA file can be copyrighted.
aThe file protected by copyright is not playable.
No disc is in the player.
aInsert disc into the disc slot.
An attempt was made to play a disc with a region number other than “1” or “ALL”.
aPress [u] and check the disc.
REGION ERROR
Note:
¡There may be cases when the disc numbers affected by an error are displayed before “NON PLAYABLE DISC”.
❑ In case you forget the ID code...
In case you forget the ID code, please consult your nearest Panasonic Servicenter.
ID code memo
Copy the memo below, fill in the ID code, and keep it in a secure location.
Model No. CQ-VD7005U
ID CODE
Download from Www.Somanuals.com. All Manuals Search And Download.
46
CQ-VD7005U
❑ Product Servicing
❑ If the Unit Begins to
If the suggestions in the charts do not solve the problem,
we recommend that you take it to your nearest authorized
Panasonic Servicenter. The product should be serviced
only by a qualified technician.
Malfunction...
Reset switch
Insert a hard, slender stick into the hole and push the
switch.
46
Important
❑ Replacing the Fuse
Push the switch only when the unit fails to operate with
any buttons. (Stored settings and adjustments are not
cleared.)
If the unit fails to return to normal condition, call the near-
est Panasonic Servicenter and ask for repairs.
Use fuses of the same specified rating (15 A). Using dif-
ferent substitutes or fuses with higher rating, or connect-
ing the product directly without a fuse, could cause fire or
damage to this unit.
If the replacement fuse fails, contact your nearest
Panasonic Servicenter for service.
TEXT
ENTER
Reset switch
Note:
¡If the ID-CODE has been already set, you will be asked to
enter the ID-CODE right after the unit is restarted.
Maintenance
❑ Caution on Cleaning
❑ Cleaning this Unit
When the unit is dirty, wipe the surface of the display
using the Wiping Cloth (supplied).
AAllccoohhooll
Cleaning without the supplied cloth
1 Moisten the soft cloth in dishwashing
soap diluted with water and wring well.
2 Wipe lightly. Go over the same surface
with a dry cloth.
PPeessttiicciiddee
Wax
Wax
Thinner
Thinner
Note:
Benzine
Benzine
¡Since there is the possibility of water drops getting
inside of the unit, do not directly apply cleanser to the
surface.
¡Do not scratch the screen with your nails or other hard
objects. The resulting scratches or marks will obscure
the images.
Your product is designed and manufactured to ensure a
minimum of maintenance. Use a dry soft cloth for routine
exterior cleaning. Never use benzine, thinner or other sol-
vents.
Caution
¡If water drops or similar wet substances get inside
the monitor, it may cause a malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
CQ-VD7005U
Notes on Discs
How to hold the disc
¡Do not touch the underside of the disc.
Disc insert
The surfaces of new discs tend to be slippery. Therefore,
when using such a disc for the first time, it may not load
satisfactorily even when it has been inserted into the
unit. At a time like this, insert the disc into the unit as far
as it will go until it is loaded properly.
¡Do not scratch the disc.
¡Do not bend disc.
¡When not in use, keep disc in the case.
47
Printed side
¡When inserting a disc into or ejecting and removing
it from the unit, insert it straight in or eject and
remove it straight out in parallel with the unit.
Otherwise, the disc may be scratched or marked in
the process.
¡When inserting a disc, do not put one disc on anoth-
er. Failure to observe this may cause the discs to
be jammed.
Do not use discs that fit any of the descriptions given
below. Using these discs may damage the discs or
cause the unit to malfunction.
¡Special discs in a shape which is not round
Do not leave discs in the following places:
¡Direct sunlight
¡Near car heaters
¡Dirty, dusty and damp areas
¡On seats and dashboards
¡Partly or wholly transparent disc
Disc cleaning
Use a dry, soft cloth to wipe from the center outward.
Do not attach any seals or labels to your discs.
Do not write on the disc label in a heavy pen or ballpoint
pen.
Wholly transparent disc*
Partly transparent disc
*Wholly semi-transparent disc may not be played back.
¡Discs with adhered labels, etc. on them
<Correct>
<Wrong>
Disc with adhered stickers Labels created by a printer
or tape
Notes on CD-Rs/RWs,
DVD–Rs/RWs
¡You may have trouble playing back some CD-R/RW,
DVD-Rs/RWs discs recorded on CD/DVD recorders
(CD-R/RW, DVD–Rs/RWs drives), either due to their
recording characteristics or dirt, fingerprints, scratch-
es, etc. on the disc surface.
Protective films or sheets
Disc accessories (stabiliz-
ers, etc.)
¡CD-R/RW, DVD–Rs/RWs discs are less resistant to
high temperatures and high humidity than ordinary
music CDs. Leaving them inside a car for extended
periods may damage and make playback impossible.
¡The unit may not successfully playback a CD-R/RW,
DVD–Rs/RWs that was made by the combination of
writing software, a CD/DVD recorder (CD-R/RW,
DVD–Rs/RWs drive) and a disc if they are incompati-
ble with one another.
¡Damaged or deformed discs
Shoddily made discs
Discs with cracks,
scratches or parts missing
¡This player does not play CD-R/RW, DVD–Rs/RWs
discs if the session is not closed.
¡Be sure to observe the handling instructions of CD-
R/RW, DVD–Rs/RWs discs.
Discs with burrs
Please remove the burrs
before use.
¡This player does not play CD-R/RW discs which con-
tain other than CD-DA or MP3/WMA data.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
CQ-VD7005U
Language Code List
In “OTHER” cases... (apage 38)
Input the four digit language code pressing the buttons
to
.
Touch
to determine.
48
Note:
Setting is finished and the display returns to the main menu.
¡
For retrying selection during number entry, touch/press
¡
[RETURN]
/
.
DVD language menu (apage 38)
Code Language Name
Code Language Name
Code Language Name
6565 Afar
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7387 Hebrew
7465 Japanese
7473 Yiddish
7487 Javanese
7565 Georgian
7575 Kazakh
7576 Greenlandic
7577 Cambodian
7578 Kannada
7579 Korean
7583 Kashmiri
7585 Kurdish
7589 Kirghiz
8277 Rhaeto-Romance
8279 Romanian
8285 Russian
8365 Sanskrit
8368 Sindhi
8372 Serbo-Croatian
8373 Singhalese
8375 Slovak
8376 Slovenian
8377 Samoan
8378 Shona
8379 Somali
8381 Albanian
8382 Serbian
8385 Sundanese
8386 Swedish
8387 Swahili
8465 Tamil
6566 Abkhazian
6570 Afrikaans
6577 Ameharic
6582 Arabic
6583 Assamese
6589 Aymara
6590 Azerbaijani
6665 Bashkir
6669 Byelorussian
6671 Bulgarian
6672 Bihari
6678 Bengali; Bangla
6679 Tibetan
6682 Breton
6765 Catalan
6779 Corsican
6783 Czech
6789 Welsh
7665 Latin
8469 Telugu
8471 Tajik
8472 Thai
8473 Tigrinya
8475 Turkmen
8476 Tagalog
8479 Tonga
8482 Turkish
8484 Tatar
6865 Danish
6869 German
6890 Bhutani
6976 Greek
6978 English
6979 Esperanto
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
7678 Lingala
7679 Laothian
7684 Lithuanian
7686 Latvian, Lettish
7771 Malagasy
7773 Maori
7775 Macedonian
7776 Malayalam
7778 Mongolian
7779 Moldavian
7782 Marathi
7783 Malay
8487 Twi
8575 Ukrainian
8582 Urdu
8590 Uzbek
7079 Faroese
7082 French
7089 Frisian
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
7784 Maltese
7789 Burmese
7865 Nauru
7869 Nepali
7876 Dutch
7879 Norwegian
7982 Oriya
8065 Panjabi
8076 Polish
8673 Vietnamese
8679 Volapük
8779 Wolof
8872 Xhosa
8979 Yoruba
9072 Chinese
9085 Zulu
7273 Hindi
7282 Croatian
7285 Hungarian
8083 Pashto, Pushto
8084 Portuguese
8185 Quechua
Download from Www.Somanuals.com. All Manuals Search And Download.
49
CQ-VD7005U
Definition of Terms
This fully discrete format divides the music signals
into 5.1 channels: Front Left (L), Front Right (R),
Center (C), Left Surround (LS), Right Surround (RS)
and Subwoofer (SW: 0.1 channel) for recording and
playback. The number of channels that are recorded
depends on the software. (1 to 5.1 channels)
Dolby Digital
Playback control (VCD (Video CD))
If the VCD (Video CD) has “With Playback Control”
or others written on the disc surface or on the jacket,
the scenes or information to be viewed (or listened
to) can be selected interactively with the screen by
looking at the menu shown on the screen.
In these instructions, playback using the menu
screen is referred to as the “menu play” for video
CDs. This player supports Video CDs with playback
control.
49
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
Title, Chapter (DVD)
DVDs are divided into some large sections (titles) or
some small sections (chapters). Each section is
numbered; these numbers are called “Title number”
or “Chapter number”.
Dolby Pro Logic
This format records signals from four channels
[Front Left (L), Front Right (R), Center (C), and
Monaural Surround (S)] in two channels, decodes
those channels through a Dolby Pro Logic decoder,
and then outputs the resulting signals in four chan-
nels.
Title 1
Chapter 2
Title 2
Chapter 1
……
……
Chapter 1
Track (Video CD/CD)
dts
Video CDs or CDs are divided into some sections
(tracks). Each section is numbered; these numbers
are called “Track number”.
This format requires more data than Dolby Digital,
and provides higher quality surround playback.
Similar to Dolby Digital, this fully discrete format
divides the music signals into 5.1 channels: Front
Left (L), Front Right (R), Center (C), Left Surround
(LS), Right Surround (RS) and Subwoofer (SW: 0.1
channel) for recording and playback.
……
Track 3 Track
Track 1
Track 2
Interactive DVD
An interactive DVD is DVD software which includes
“DTS” and “DTS Digital Surround” are registered trade-
marks of Digital Theater Systems, Inc.
multiple angles, multiple plot endings, etc.
Letterbox screen
“This product incorporates copyright protection tech-
nology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise author-
ized by Macrovision. Reverse engineering or disas-
sembly is prohibited.”
This refers to a screen on which the playback picture
of wide-screen DVDs or VCD (Video CD)s appears
with black bands running along the top and bottom.
LPCM (Linear PCM audio)
In this format, the audio signal is converted to digital
data and recorded in two channels without compres-
sion. Because the capacity of a DVD disc is large, it
can store more data with better accuracy than a CD.
Pan & Scan screen
This refers to a screen on which the playback picture
of wide-screen DVDs or VCD (Video CD)s is cut off
at the left and right sides.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
CQ-VD7005U
Specifications
General
Audio section
¡Power supply
: 12 V DC (11 V – 16 V), test
voltage 14.4 V, negative
ground
¡Output voltage/Impedance: 2 Vrms/600 Ω
¡Frequency characteristics
(when “LARGE” is selected)
Front L/R, Center, Rear
50
¡Current consumption : Less than 10 A (during disc
playback)
(surround) L/R
¡Delay time
: 20 Hz – 20 kHz ( 1 dB)
¡
Maximum power output : 50 W x 4 ch
¡Power output
: 18 W x 4 ch
(1 kHz, 1 %, 4 Ω)
•
Dolby Digital
Center
: 0 – 5 ms
Rear (surround) L/R : 0 – 15 ms
¡Compatible speaker
impedance
¡Video input signal
: 4 Ω
• Dolby Pro Logic
: Composite video signal, 1.0
Vp-p (75 Ω)
Rear (surround) L/R : 15 – 30 ms
• Distortion
¡Audio input sensitivity : 2 Vrms
¡Video output signal : Composite video signal, 1.0
Vp-p (75 Ω)
Pre-Amp output voltage : 2 Vrms
Pre-Amp output impedance: Less than 600 Ω
Front L/R
(1 kHz, 0 dB, PCM input) : 0.01 %
¡Dynamic range
¡S/N ratio
: 96 dB (during CD playback)
: 100 dB (during CD playback)
¡
¡
¡Dimensions (W x H x D) : 178 x 50 x 165 mm
Monitor
15
1
{7” x 1 /16 ” x 6 /2”}
: 2.4 kg {5 lbs. 5 oz.}
¡Storage temperature
range
¡Weight
: – 20 °C – 80 °C
{– 4 °F –176 °F}
: 7” wide
FM stereo radio
¡Frequency range
¡Usable sensitivity
¡Stereo separation
¡S/N ratio
¡Liquid crystal panel
¡Screen dimensions
(W x H x D)
: 87.9 MHz – 107.9 MHz
: 12.2 dBf
: 40 dB (1 kHz)
: 63 dB
: 154 x 87 x 177 mm
15
1
7
{6 /16” x 3 /16” x 6 /16”}
: 336 960 pixels (234 vertical
x 480 horizontal x 3)
: Over 99.99%
¡Number of pixels
AM radio
¡Valid pixel ratio
¡Display method
¡Frequency range
¡Usable sensitivity
¡Image rejection ratio
: 530 kHz – 1 710 kHz
: 25 dB/µV
: 50 dB
: Transparent color filter for-
mat
: TFT (Thin Film Transistor)
active matrix format
: Internal light (Built-in small
fluorescent lamp)
¡Drive method
¡Light source
Above Specifications comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4 Ω and ≤
1% THD+N
Signal to Noise Ratio:
78 dBA (reference: 1 W into 4 Ω)
Note:
¡Specifications and the design are subject to modification without notice due to improvements in technology.
¡Some figures and illustrations on this manual may be different from your product.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
CQ-VD7005U
Panasonic Consumer
Panasonic Sales Company,
Division of Panasonic Puerto
Rico, Inc. (“PSC”)
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
L4W 2T3
Electronics Company,
Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
©2006 Matsushita Electric Industrial Co., Ltd. YFM284C671ZA PTW1106-1017
Printed in Taiwan
Imprimé en Taïwan
Impreso en Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Milwaukee Blower 0780 20 User Manual
Napoleon Grills Gas Grill PRESTIGE 500 User Manual
NEC Washer SAV 4 HD User Manual
NuTone Door LA 20 SERIES User Manual
Oki Printer 12i n User Manual
Olympus Projector VP 1 User Manual
Onkyo CD Player CR N1 User Manual
Onkyo Stereo Receiver TX SR602 602E User Manual
Optiview Security Camera VPTZ User Manual
Panasonic Answering Machine KX TG9120E User Manual