MP3 CD Player/Receiver with CD Changer Control
A
PM
MONO/LOC
PTY
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
CQ-RDP472N
BAND
VOL
SEL
PWR
TUNE
TRACK
SOURCE
REMOTE
.
.
EON PTY CT
DISP
CT
AF
RANDOM
4
SCAN
5
REPEAT
6
LOUD
REG
FOLDER
MUTE
1
2
3
TA
Operating Instructions
BBeeddiieennuunnggssaannlleeiittuunngg
MMaannuueell dd’’iinnssttrruuccttiioonnss
GGeebbrruuiikkssaaaannwwiijjzziinngg
BBrruukkssaannvviissnniinngg
MMaannuuaallee ddii iissttrruuzziioonnii
MMaannuuaall ddee IInnssttrruucccciioonneess
TEXT
¡Please read these instructions carefully before using this product and keep this manual for future reference.
¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach
für spätere Nachschlagzwecke sorgfältig auf.
¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.
¡Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.
¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov.
¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.
¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Data System (RDS).................................. 10
Clock Set ............................................................. 13
CD / MP3 Player .................................................. 14
CD Changer Control......................................... 20
Installation........................................................... 22
Anti-Theft System............................................... 25
Electrical Connections....................................... 26
Speaker Connections......................................... 28
Fuse ..................................................................... 28
Maintenance........................................................ 29
Troubleshooteing ............................................. 30
Specifications ..................................................... 35
Radio-Daten-System (RDS)-Empfang............... 42
Uhrzeit (CT) ......................................................... 45
CD / MP3-Spieler................................................. 46
Steuerung des CD-Wechslers ........................... 52
Einbau.................................................................. 54
Diebstahlschutz.................................................. 57
Elektrischer Anschluß........................................ 58
Anschluß der Lautsprecher............................... 60
Sicherung............................................................ 60
Pflege................................................................... 61
Störungsbeseitigung.......................................... 62
Technische Daten ............................................... 67
Réception radio RDS (Radio Data System)...... 74
Réglage de l’horloge .......................................... 77
Lecteur de CD / MP3........................................... 78
Commande de changeur de CD ........................ 84
Installation........................................................... 86
Système antivol .................................................. 89
Branchements électriques................................. 90
Branchement des haut-parleurs ....................... 92
Fusible................................................................. 92
Entretien.............................................................. 93
En cas de difficulté............................................. 94
Données techniques .......................................... 99
RDS (Radio Data Systeem).............................. 106
Gelijk zetten van de klok.................................. 109
CD-/MP3-speler ................................................. 110
Bediening van de CD-wisselaar....................... 116
Installatie ........................................................... 118
Anti-diefstal systeem ....................................... 121
Elektrische aansluitingen ................................ 122
Aansluitingen luidsprekers ............................. 124
Zekering............................................................. 124
Onderhoud ........................................................ 125
Verhelpen van storingen.................................. 126
Technische gegevens....................................... 131
RDS-mottagning (datastyrd radiomottagning) ... 138
Tidsinställning .................................................. 141
CD-/MP3-spelare............................................... 142
CD-växlarstyrning............................................. 148
Montering .......................................................... 150
Stöldskyddsanordning..................................... 153
Elektriska anslutningar.................................... 154
Anslutning av högtalare................................... 156
Säkring .............................................................. 156
Underhåll........................................................... 157
Felsökning......................................................... 158
Tekniska data .................................................... 163
Ricezione RDS (Radio Data System) .............. 170
Regolazione dell’orologio................................ 173
Lettore CD / MP3............................................... 174
Controllo del cambia CD.................................. 180
Installazione...................................................... 182
Sistema antifurto .............................................. 185
Collegamenti elettrici ....................................... 186
Collegamenti degli altoparlanti ....................... 188
Fusibile.............................................................. 188
Manutenzione.................................................... 189
Correzione dei difetti di funzionamento......... 190
Dati tecnici ........................................................ 195
Recepción RDS (sistema de datos radiofónicos).... 202
Ajuste de la hora............................................... 205
Reproductor de CD / MP3 ................................ 206
Control del cambiador de discos CD.............. 212
Instalación......................................................... 214
Sistema antirrobo............................................. 217
Conexiones eléctricas...................................... 218
Conexiones de los altavoces .......................... 220
Fusible............................................................... 220
Mantenimiento .................................................. 221
Solución de problemas.................................... 222
Especificaciones .............................................. 227
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
Panasonic welcomes you to their constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured
with carefully selected components, and assembled by people who are proud of the reputation their work has
built for our company. We know this product will bring you many hours of enjoyment, and after you discover
the quality, value and reliability we have built into it, you too will be proud to be a member of our family.
1
Volume Level
Precautions
For your driving safety, keep the volume level low enough to be aware of road
and traffic conditions.
Car Washing
To avoid electrical shorts which may cause fire, or other damage, do not
expose this product (including the speakers and CDs) to water or excessive
moisture.
Car Ventilation
If your car is parked for several hours in direct sunlight, the temperature inside
the car may become very high. It is advisable to drive the car and give the
interior a chance to cool down before switching the unit on.
Power Supply
This product is designed to be used in a car having a 12-volt negative ground
battery system.
Disc Mechanism
Do not insert coins or any small objects. Keep screwdrivers and other metallic
objects away from the disc mechanism and disc.
Service
This product is made of precision parts. Do not attempt to disassemble or
adjust any parts. For repair, please consult your nearest authorized Panasonic
Service Center.
Note: The preset memory is cleared to return to the original factory setting
when the power connector or battery is disconnected.
Caution: This product utilizes a laser.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
Laser Products
Laser products:
Wave Length 780 nm
Laser Power No hazardous radiation is emitted with safety protection.
Do not take apart this unit or attempt to make any changes yourself.
This unit is a very intricate device that uses a laser pickup to retrieve
information from the surface of compact discs. The laser is carefully
shielded so that its rays remain inside the cabinet.
Therefore, never try to disassemble the player or alter any of its parts
since you may be exposed to laser rays and dangerous voltages.
• Operating Instructions............................................................................................1
• Supplied Hardware......................................................................1 set (a Page 22)
• Remote Control Unit...............................................................................................1
• Lithium Battery (CR2025) ......................................................................................1
• Warranty Card........................................................................................................1
Components
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Remote Control Unit Preparation
S
H
Battery Installation
q Remove the battery holder.
(Back side)
2
Pull the holder out at position B while pushing
position A as indicated.
Lithium battery
w Install the battery on the battery holder.
Place the battery in the holder with its (+) side
upwards as shown.
e Insert the battery holder.
Push in the battery holder back into its original
position.
Position B
Battery holder
Position A
Battery Notes
Remove and dispose of an old battery immediately.
Battery Information:
¡Battery Type: Panasonic lithium battery (CR2025) (Included)
¡Battery Life: Approximately 6 months under normal use (at room temperature)
Caution: Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire. Battery
leakage may damage the unit.
¡Do not disassemble or short the battery. Do not throw a battery into a fire.
¡Keep batteries away from children to avoid the risk of accidents.
¡Be careful to the disposal rules when you dispose of batteries.
Remote Controls
Audio Mode Selection
Panel Removal Alarm Set
POWER
SOURCE
MENU
SEL
Power
Source
NUMBER
VOL
Volume control
Mute
MUTE
Loudness
Track/Folder number input
1
2
3
Random
Scan
Repeat
RAND
SCAN
REP
4
7
5
8
0
6
Tune
Track/File Selection
Fast forward/Fast reverse
9
Folder/Disc Selection
Display
BAND
SET
DISP
Band
Set
Pause
Car Audio
[0] to [9]
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Power and Audio Controls
S
H
Power
Turn your car’s ignition key to ACC or ON position.
Power on : Press [SOURCE] (PWR).
3
Power off : Press [SOURCE] (PWR) again and hold.
The panel removal alarm sounds. (a Page 25).
Note: When the power is switched on for the first time, a demonstration message
appears on the display. To cancel this display, press [DISP].
PM
A
MONO/LOC
PTY
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
VOL
SEL
PWR
TUNE
TRACK
SOURCE
REMOTE
.
.
EON PTY CT
DISP
CT
AF
Remote Control
Sensor
RANDOM
SCAN
REPEAT
LOUD
REG
FOLDER
1
2
3
4
5
6
TA
MUTE
Loudness
Volume
Mute
Press and hold [MUTE] (LOUD)
for more than 2 seconds to
enhance bass and treble tones at
low or medium volume.
[}VOL] : Up
Press [MUTE] to mute the
sound completely.
[{VOL] : Down
Press and hold for rapid adjustment.
Press [MUTE] again to cancel.
¡•
VOL 20
Press and hold [MUTE] (LOUD)
again to cancel.
s
REP
R
LOUD
¡•
MUTE
s
R
LOUD
REP
Volume Level
(0 to 40)
LOUD
Note: When the power is switched
off and on again, the volume slowly
rises to the previous level.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
Mode Selection
Press [SOURCE] to change the mode.
4
Radio
(a Page 8)
CD / MP3 Player
(Disc is in the player.)
(a Page 14)
CD Changer
(Optional CD changer is connected
and magazine is in the changer.)
(a Page 20)
PM
A
MONO/LOC
PTY
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
VOL
SEL
PWR
TUNE
TRACK
SOURCE
REMOTE
.
.
EON PTY CT
DISP
CT
AF
RANDOM
SCAN
REPEAT
LOUD
REG
FOLDER
1
2
3
4
5
6
MUTE
TA
Audio Mode (Bass / Treble / Balance / Fader)
Press [SEL] to select the audio mode.
Press [}VOL] or [{VOL] to change each level.
q
w
Regular Mode
Volume
(–12 to +12)
(–12 to +12)
Bass
Treble
BAS+ 9:dB¡•
s
REP
R
LOUD
TRE- 3:dB¡•
s
R
LOUD
REP
¡•
BAL R15
LOUD
(Left/Right: 1 to 15)
(Center)
Balance
s
REP
R
¡•
BAL CNT
LOUD
s
R
REP
¡•
(Front/Rear: 1 to 15)
(Center)
s
REP
Fader
R
LOUD
¡•
s
R
LOUD
REP
Note: If no operation takes place for more than 5 seconds
in audio mode (2 seconds in Volume mode), the display
return to regular mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
Radio Basics
q Mode Selection
Press [SOURCE] to select the radio mode.
5
¡•
s
REP
R
LOUD
FM Stereo Indicator
PM
A
MONO/LOC
PTY
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
VOL
SEL
PWR
TUNE
TRACK
¡•
SOURCE
s
R
REP
LOUD
REMOTE
.
.
EON PTY CT
DISP
CT
AF
RANDOM
SCAN
REPEAT
LOUD
REG
FOLDER
1
2
3
4
5
6
MUTE
TA
r Mono / Local Selection
w Band
MONO : Monaural reception. Select MONO to reduce
Press [BAND] to change the bands.
noise when receiving a weak stereo broadcast.
¡•
s
REP
R
LOCAL : Tunes in strong stations only.
LOUD
Band
FM broadcasts
FM1
FM2
FM3
Press and hold [PTY] (MONO/LOC) to change the mode.
Release at the desired point.
AM broadcast
Press [PTY] (MONO/LOC) to switch LOCAL mode on and
off.
AM (LW/MW)
FM broadcast
AM broadcast
MONO OFF
LOCAL OFF
LOCAL ON
e Manual Tuning
[[TUNE] : Higher frequency.
MONO ON
LOCAL OFF
LOCAL OFF
[]TUNE] : Lower frequency.
Seek Tuning
MONO ON
LOCAL ON
Press and hold [[TUNE] or []TUNE]
for more than 0.5 seconds, then release.
Seeking will start.
MONO OFF
LOCAL ON
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
Caution: To ensure safety, never attempt to preset
stations while you are driving.
Preset Station Setting
Up to 6 stations each can be saved in the FM1, FM2, FM3
and AM (LW/MW) preset station memories.
6
q Band
Select a band. (a Page 8)
PM
A
MONO/LOC
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
PTY
VOL
SEL
PWR
TUNE
TRACK
SOURCE
s
REP
R
REMOTE
LOUD
.
.
EON PTY CT
DISP
CT
AF
RANDOM
SCAN
REPEAT
LOUD
REG
FOLDER
1
2
3
4
5
6
MUTE
TA
w Auto Station Preset
Press and hold [BAND] (APM) (Auto Preset Memory)
for more than 2 seconds.
¡The 6 stations with good reception will be automatically
saved in the memory under preset numbers 1 to 6.
¡Once set, the preset stations are sequentially
scanned for 5 seconds each.
Notes:
¡Only RDS stations will be saved at default setting
(AF ON). To select non RDS stations too, set AF OFF.
(a Page 10)
¡New stations are overwritten on existing saved
stations after following this procedure.
Manual Station Preset
q Use manual or seek tuning to find a station. (a Page 8)
w Press and hold one of the preset buttons from [1] to [6]
until the display blinks once.
s
REP
R
LOUD
Preset Number
Tuning in to a Preset Station
Press the corresponding preset button from [1] to [6]
to select a preset station.
Note: You can change the memory presetting by
repeating the above procedure.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Radio Data System (RDS)
S
H
RDS Basics
The following functions are available when receiving RDS stations.
7
PS Display
CT Service
AF
(Program Service Name)
(Clock Time)
(Alternative Frequency)
The name of station is displayed
instead of the frequency.
When receiving an RDS station, the
CT (Clock Time) service automatically
adjusts the time.
When reception is poor, an RDS station
broadcasting the same program is
tuned in automatically.
“NO CT” is displayed in areas where
CT service is not available.
(a Page 13 for Clock Set)
AF Mode
LO
Press [AF] to select one of the following AF modes.
AF 1 Mode
AF 2 Mode
AF Off Mode
Low level AF operating sensitivity. (Default)
High level AF operating sensitivity.
When the AF network of an RDS station is
not required.
PM
A
MONO/LOC
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
PTY
VOL
SEL
PWR
TUNE
TRACK
MONO
¡•
SOURCE
BBC R4
s
REP
R
PTY
LOUD RDS EON TP
LOCAL
REMOTE
.
.
EON PTY CT
DISP
CT
AF
RANDOM
SCAN
REPEAT
LOUD
REG
FOLDER
1
2
3
4
5
6
MUTE
TA
Display Change
Preset Memory
REG (Region) Mode
Press [DISP] to change the display
(AF mode on Setting)
Changes the selection range of AF and
PI Seek.
as follows.
Preset Station Calling (Best Station)
Press and hold [AF] (REG) to switch
on and off.
AF self-tuning selects a station with
good reception when the preset tuning
is activated.
PS (Program Service Name) (Default)
MONO
¡•
LOCAL
BBC R4
s
R
PTY
LOUD RDS EON TP
REP
¡•
REG ON
s
REP
R
RDS EON TP
LOUD
For Poor Sound Quality (PI Seek)
3 seconds
The frequency is changed only
for programs within the region.
Frequency
If reception is poor when tuning in a
preset station, press the same preset
number button. The same station with
better reception will be searched for.
Press the same preset number button
again to cancel.
MONO
¡•
s
REP
R
PTY
LOUD RDS EON TP
LOCAL
CT (Clock Time)
REG OFF¡•
s
REP
R
¡•
RDS EON TP
LOUD
CT 12:34
s
REP
R
RDS EON TP
LOUD
The frequency is changed also
for programs outside the region.
Note: When AF mode is on, only
RDS stations will be memorized
automatically. (a Page 9)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
RDS service availability varies with areas. Please understand if RDS service is not available in your area. This chapter
explains the summary and operation regarding RDS.
E
N
G
L
I
S
H
( )
Traffic Announcements TA
8
Some RDS FM stations periodically
provide traffic information.
TP
TA
(Traffic Program)
Broadcasting of traffic information.
(Traffic Announcements)
Radio announcements on traffic
conditions.
TA Mode
R
L
Press [TA] to switch TA mode on and off.
If the station received is not a TP station, the unit
automatically searches for a TP station to tune in to it.
When the TP station received begins a traffic
announcement, you can hear it from the unit.
TA On
TA Off
PM
A
MONO/LOC
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
PTY
VOL
PWR
TUNE
TRACK
SEL
MONO
¡•
SOURCE
BBC R4
RANDOM
s
REP
R
REMOTE
PTY
LOUD RDS EON TP
LOCAL
.
.
EON PTY CT
DISP
CT
AF
SCAN
REPEAT
LOUD
REG
FOLDER
TA
1
2
3
4
5
6
MUTE
TA Volume Set
Muting in TA Mode
To listen only to traffic announcements while muting, press and
hold [TA] for more than 2 seconds when TA is on.
To cancel the muting TA on mode (muting in TA mode / TA
mode), take either following two.
(Volume Level : 0 to 40)
Press [}VOL] or [{VOL] while receiving
traffic announcements .
The TA volume differs from the regular volume
(by up to 5 levels).
¡Press [TA] again.
¡Press [}VOL] several times.
Note: To switch to TA off, press [TA] again.
TA Standby
TP Auto Search
When reception of a TP station is poor, TP Auto Search will
automatically search for a TP station with better reception.
When TA is on, CD / MP3 or CD changer will be
interrupted by FM traffic announcements.
MONO
¡•
s
REP
R
PTY
LOUD RDS EON TP
LOCAL
Seek and Preset Station (TA on Setting)
Information
End
TP Seek Tuning: Seek tunes only TP stations.
Auto TP Station Preset: The 6 strongest TP
stations are saved in memory.
(a Page 8)
MONO
¡•
LOCAL
BBC R4
s
REP
R
PTY
LOUD RDS EON TP
(a Page 9)
Tuning in a TP Preset Station
(a Page 9)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Radio Data System (RDS)
(continued)
S
H
Program Type Reception (PTY)
RDS FM stations provide a program type identification signal.
9
Example: news, rock, classical music, etc.
PTY Mode
Press [PTY] to switch PTY display
The PTY function described
below becomes enabled after
selecting to the PTY mode.
PTY On
PTY Off
mode on or off.
MONO
¡•
NEWS
s
REP
R
PTY
LOUD RDS EON TP
LOCAL
When there is no corresponding
program type, “NO PTY” is displayed.
PM
A
MONO/LOC
PTY
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
VOL
SEL
PWR
TUNE
TRACK
MONO
¡•
REP
SOURCE
NEWS
s
R
REMOTE
PTY
RANDOM
LOUD RDS EON TP
LOCAL
.
.
EON PTY CT
DISP
CT
AF
SCAN
REPEAT
LOUD
REG
FOLDER
1
2
3
4
5
6
MUTE
TA
PTY Selection
q
PTY Search
q
Press [[TUNE] to change the program type
Select a program type by pressing the preset
button.
as follows. ([]TUNE] : opposite direction)
The preset program type appears on the display
for 5 seconds.
Example: Press preset button [1].
SPEECH
INFO
/
/
MUSIC
SPORT
/ NEWS
/ EDUCATE / DRAMA
/ POP M
/ AFFAIRS
/
/
/
CULTURES / SCIENCE / VARIED
MONO
NEWS
ROCK M
OTHER M
SOCIAL A
LEISURE
OLDIES
/
/
/
/
/
M_O_R_M/ LIGHT M
WEATHER / FINANCE / CHILDREN /
RELIGION / PHONE IN / TRAVEL
JAZZ / COUNTRY / NATIONAL /
FOLK M / DOCUMENT /
/ CLASSICS /
s
R
PTY
REP
LOUD RDS EON TP
LOCAL
/
Press the same preset button again (or press
[BAND]) to tune in the desired program type
station.
w
Example: Press preset button [1] again.
Select the desired program and press [BAND].
Seek will start to tune in to a station that
broadcasting the selected program type.
w
MONO
NEWS
s
R
PTY
REP
LOUD RDS EON TP
LOCAL
PTY display in Swedish
PTY Preset Change
q
Press [DISP] to switch the PTY display language as
Select a program type by using PTY Selection or
pressing PTY Preset buttons.
follows.
MONO
¡•
LOCAL
<English>
NEWS
s
REP
R
MONO
¡•
PTY
LOUD RDS EON TP
POP M
s
REP
R
PTY
LOUD RDS EON TP
LOCAL
Press and hold one of the buttons from [1] to [6].
Example: Press and hold preset button [2].
w
MONO
¡•
<Swedish>
s
REP
R
PTY
LOUD RDS EON TP
LOCAL
MONO
POP M
s
REP
R
PTY
LOUD RDS EON TP
LOCAL
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
Clock Set
When RDS CT service is not available, set the
clock as follows. (24-hour system)
10
BAND
PTY Type Preset
Program types are stored in memory under preset buttons
from [1] to [6] as shown in the table below.
To tune in the desired program type, press any of preset
buttons from [1] to [6].
PM
A
CQ-RDP472N CD RECEIVER WITH CHAN
BAND
VOL
SEL
TUNE
TRACK
.
.
EON PTY CT
DISP
RANDOM
S
LOUD
1
2
3
News
Speech
Sport
NEWS
1
2
3
4
MUTE
CT
AFFAIRS / INFO
EDUCATE / DRAMA
CULTURES / SCIENCE
VARIED / WEATHER
FINANCE / CHILDREN
SOCIAL A / RELIGION
PHONE IN / TRAVEL
LEISURE / DOCUMENT
DISP (CT)
] [TUNE
AM Mode
SPORT
q Press [BAND] to change to AM mode.
4 Pop. Music
POP.M
MONO
AM 1305
s
REP
R
LOUD
RDS EON TP
PTY
LOCAL
(AM mode)
Classic
5
CLASSICS
Music
w Press [DISP] (CT).
ROCK M / M_O_R_M
LIGHT M / OTHER M
JAZZ / COUNTRY
NATIONAL / OLDIES
FOLK M
MONO
NO CT
s
REP
R
Other
Music
PTY
(Clock display)
LOUD
RDS EON TP
LOCAL
6
Hours
e Press and hold [DISP] (CT).
MONO
0:00
s
REP
CT
R
EON (Enhanced Other Networks)
PTY
(Hour blinks)
LOUD
RDS EON TP
LOCAL
When EON data is received, the EON indicator lights the TA
and AF functions are expanded as follows.
r Press [[TUNE] or []TUNE].
TA : Traffic information from the current and other network
stations can be received.
MONO
18:00
CT
s
REP
R
LOUD
RDS EON TP
PTY
LOCAL
(Hour set)
AF : The frequency list of preset RDS stations is updated by
EON data.
Minutes
t Press [DISP] (CT).
EON enables the radio to make fuller use of RDS information.
It constantly updates the AF list of preset stations, including
that currently tuned in to. For example, if you preset a station
far from home, you will later be able to receive the same station
at an alternative frequency, or any other station serving the
same program. EON also keeps track of locally available TP
stations for quick reception.
MONO
18:00
CT
s
REP
R
RDS EON TP
PTY
LOCAL
(Minute blinks)
LOUD
y Press [[TUNE] or []TUNE].
MONO
18:35
CT
s
REP
R
RDS EON TP
PTY
LOCAL
(Minute set)
LOUD
u Press [DISP] (CT).
MONO
Emergency Announcement
Reception
18:35
CT
s
REP
R
LOUD
RDS EON TP
PTY
LOCAL
(End)
Note: Hold [[TUNE] or []TUNE] to
When an emergency announcement is broadcast, the unit is
automatically switched to receiving that broadcast. If this
happens in a mode other than radio mode (CD / MP3 mode
and CD changer mode) or in Muting in TA mode, “ALARM”
blinks on the display.
change numbers rapidly.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
CD / MP3 Player
S
H
Disc Insert and Playback
Listening to a CD
(When a CD is in the player...)
Insert a disc.
11
The unit identifies CD-DA data or MP3 data, and plays it.
Mode Selection
Press [SOURCE] to select the CD mode.
¡•
s
REP
R
LOUD
Label Side
¡•
¡•
s
REP
R
LOUD
Track Selection
(Disc loaded)
(Data reading)
[fTRACK] : Advance to the next track.
[aTRACK] : Back to the beginning of the current track.
Back to the previous track. (Press twice)
s
REP
R
LOUD
Fast Forward / Fast Reverse
CD
MP3
Press and hold
¡•
¡•
R
REP
MP3
CD
s
REP
s
R
LOUD
LOUD
[fTRACK] : Fast forward.
[aTRACK] : Fast reverse.
Release to resume the playback.
(Ordinary music CD recog-
nized and playback starts)
(MP3 data recognized and
playback starts a Page 16)
Notes:
¡Do not insert a disc when this indicator lights
because a disc is already loaded.
s
R
Pause
¡When a CD-R or CD-RW which has CD-DA formatted
data is loaded, this unit recognizes it as an ordinary
music CD.
Press [BAND] to pause.
Press [BAND] again to resume the playback.
¡If you record many folders and MP3 files onto a disc, it
may take up to a few minutes before playback starts.
¡If a disc contains both CD-DA and MP3 data, only first-
recorded data is played.
¡•
PAUSE
s
REP
R
LOUD
Direct Track Selection
(Only for remote control)
POWER
MENU
SOURCE
SEL
Example: Track number 12
NUMBER
VOL
MUTE
q Press [#] (NUMBER).
Stop and Disc Eject
1
RAND
2
SCAN
3
REP
MONO/LOC
Press [u] to stop CD / MP3 play and
4
7
5
8
0
6
PTY
w Press [1] [2].
eject the disc.
PWR
Note: The unit returns to the previous mode when the
disc is ejected in the CD / MP3 player mode.
9
BAND
DISP
SET
Press [BAND] (SET).
e
Car Audio
The corresponding track
Cautions:
starts playing.
¡
Only 12 cm CD, CD-ROM, CD-R and CD-RW discs are
Re-input the number: Press [#] (NUMBER).
Return to regular display: Press [DISP].
available for this unit.
¡Do not use irregular shaped discs.
¡Do not use discs that have a seal or label attached.
Note: Random, scan and repeat play are canceled
when [#] is pressed.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
Available Discs
Note: Refer to the section on “Points to remember
when recording an MP3 disc” (a Page 18) and “Notes
on CD-Rs/RWs” (a Page 29).
E
N
G
L
I
S
H
MP3
MP3
MP3
CD-RW TEXT
TEXT
CD-RW CD-ROM
12
Track Number Playing Time
Disc Indicator
Pause
PM
A
MONO/LOC
PTY
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
VOL
SEL
PWR
TUNE
TRACK
SOURCE
¡•
s
REP
R
REMOTE
LOUD
.
.
EON PTY CT
DISP
CT
AF
RANDOM
SCAN
REPEAT
LOUD
REG
FOLDER
1
2
3
4
5
6
MUTE
TA
Random Scan Repeat
Disc / Track Title Scroll
Display Change
Press and hold [DISP] or more than 2 seconds when track
Press [DISP] to change the display as follows.
number/track playing time display or clock display is selected.
Track number/Track
playing time (default)
¡•
¡•
¡•
s
REP
R
LOUD
SCRL OFF¡•
¡•
SCRL ON
s
RE
R
R
R
LOUD
LOUD
Continuous scroll
Scroll stops after a circle scroll.
Disc title (scroll)
Track title (scroll)
Clock display
s
REP
R
LOUD
Notes:
¡The display shows title information only when a disc which
has CD text information is loaded. (Up to 30 letters can be
displayed when scrolling. Some letters are not serviceable.)
s
REP
R
LOUD
¡“NO TITLE” is displayed when there is no information on the disc.
¡Do not watch the scroll display while driving.
¡Press and hold [DISP] for more than 2 seconds to have
another circle scroll when set to scroll off.
CT
s
REP
R
LOUD
Press [4] (RANDOM).
Press again to cancel.
¡•
s
REP
R
Random Play
Scan Play
LOUD
Lights
Press [5] (SCAN).
Press again to cancel.
¡•
s
R
REP
LOUD
First 10 sec. of each track
Blinks
Press [6] (REPEAT).
Press again to cancel.
¡•
s
REP
R
Repeat Play
LOUD
Lights
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
CD / MP3 Player
(continued)
Listening to a MP3
(When an MP3 disc is in the player...)
Folder Selection Order /
MP3 File Playback Order
Example:
13
Mode Selection
Press [SOURCE] to select the MP3 mode.
001-003¡•
Root Folder
1
s
REP
R
LOUD
(Root Directory)
2
q
Folder Selection
[{] : Previous folder.
[}] : Next folder.
4
e
3
w
File Selection
5
[fTRACK] : Advance to the next file.
6
[aTRACK] : Back to the beginning of the current file.
Back to the previous file. (Press twice)
r
8
t
Fast Forward / Fast Reverse
7
y
Press and hold
Tree 1
Tree 2
Tree 3
Tree 4
[fTRACK] : Fast forward.
[aTRACK] : Fast reverse.
Release to resume the playback.
Folder Selection:
File Selection:
In the order
In the order
1
8
~
~
Pause
q
y
Press [BAND] to pause.
Notes:
Press [BAND] again to resume the playback.
¡This unit counts the number of folders irrespective of
the presence or absence of MP3 file.
¡•
PAUSE
s
REP
R
LOUD
¡If the selected folder does not contain any MP3 files,
the nearest MP3 files in the order of playback will be
played.
¡Playback order may be different from other MP3
players even if the same disc is used.
Direct Folder Selection
(Only for remote control)
POWER
MENU
SOURCE
SEL
Example: Folder number 5
NUMBER
VOL
MUTE
q Press [#] (NUMBER).
1
RAND
2
SCAN
3
REP
4
7
5
8
0
6
w Press [5].
9
BAND
DISP
SE
Press [BAND] (SET).
Car Audio
e
The corresponding folder
starts playing.
Re-input the number: Press [#] (NUMBER).
Return to regular display: Press [DISP].
Notes:
¡If there is no file in the specified folder, error message
“CD -E4-” appears. Select another folder which
contains MP3 files.
¡Random, scan and repeat play are canceled when [#]
is pressed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
14
Pause
Folder Number File Number Disc Indicator
PM
A
MONO/LOC
PTY
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
VOL
SEL
PWR
TUNE
TRACK
001-003¡•
RANDOM
SOURCE
Folder
s
REP
R
REMOTE
LOUD
.
.
EON PTY CT
DISP
CT
Selection
AF
SCAN
REPEAT
LOUD
REG
FOLDER
1
2
3
MUTE
4
5
6
TA
Random Scan Repeat
Display Change
Folder / File Name Scroll
Press [DISP] to change the display as follows.
Press and hold [DISP] for more than 2 seconds when folder
number/MP3 file number display, file playing time display or
clock display is selected.
Folder number/MP3
¡•
¡•
¡•
¡•
¡•
s
REP
R
file number (default)
File playing time
LOUD
LOUD
LOUD
LOUD
SCRL OFF¡•
¡•
SCRL ON
s
RE
R
R
R
LOUD
LOUD
s
REP
R
Continuous scroll
Scroll stops after a circle scroll.
Notes:
MP3 folder name
(scroll)
s
REP
R
¡“NO TITLE” is displayed when there is no folder/file name.
¡The “.mp3” file name extension is not displayed.
¡“ROOT” appears when displaying the root folder’s folder
name.
¡Do not watch the scroll display while driving.
¡Press and hold [DISP] for more than 2 seconds to have
another circle scroll when set to scroll off.
MP3 file name
(scroll)
s
REP
R
Clock display
CT
s
REP
R
LOUD
Press [4] (RANDOM).
Press again to cancel.
¡•
s
REP
R
All Files
LOUD
LOUD
Lights
Random Play
Scan Play
Press and hold [4] (RANDOM) for
more than 2 seconds.
Press and hold again to cancel.
All files in the
current folder
¡•
s
R
REP
Blinks
Press [5] (SCAN).
Press again to cancel.
¡•
s
REP
R
All Files
LOUD
Blinks
Press and hold [5] (SCAN) for
more than 2 seconds.
Press and hold again to cancel.
1st track in
each folder
First 10 sec. of
each file
¡•
s
REP
R
LOUD
LOUD
LOUD
Blinks
¡•Rs
REP
Press [6] (REPEAT).
Press again to cancel.
Current file
Lights
Repeat Play
Press and hold [6] (REPEAT) for
more than 2 seconds.
Press and hold again to cancel.
¡•Rs
003-001
Current folder
REP
Blinks
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
CD / MP3 Player
(continued)
S
H
Points to remember when recording an MP3 disc
15
This player allows you to play MP3 files recorded on CD-ROMs, CD-Rs (Recordable) and CD-RWs (Rewritable).
What is MP3
MP3, short for MPEG Audio Layer-3, is a standard for compressing digital video data adopted for video CDs and similar
media. It is one of the audio compression systems covered by MPEG’s (Motion Picture Experts Group) digital audio
compression standards. What it does is reduce the number of bytes in a song without detracting from the sound quality
by eliminating big sound waves within the sound range that is imperceptible to the human ear. This compression allows
you to reduce the contents of a conventional music CD by a factor of around 10. This means that you can record the
contents of 10 music CDs on a single CD-R or CD-RW. (The figures refer to data recorded on a 650 MB CD-R or CD-RW
at a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz.)
■ Converting (encoding) audio data to an MP3 file
¡It is recommended to set the bit rate to “128 kbps or more” and “Fixed”.
¡Bit rate 8 kbps of MPEG-2 and sampling frequency 16 kHz of MPEG-2 can not be reproduced.
¡If set to VBR (Variable Bit Rate), the file playing time may not be displayed correctly.
¡The playback sound quality differs depending on the encoding software and the bit rate. For details refer to the user
manual of your encoding software.
■ Recording MP3 files on a CD-R/RW
¡Do not record files other than MP3s or unnecessary folders on a disc. If many folders or files other than MP3s
are recorded on a disc, it may take up to 150 seconds before playback starts, and you may have difficulties using
fast forward and fast reverse.
¡Use ISO 9660 file system (Extension of the ISO 9660 file systems are included.) APPLE HFS file system is not
supported. If they do not conform to ISO 9660 file system, the file may not play normally, or the file or folder
names may not be displayed correctly.
¡Make sure to add the “.mp3” extension to each MP3 file name. A file with a different file name extension or none
at all will not play.
¡Although Multi session recording is supported, the use of Disc-at-Once is recommended. Make sure to close the
session when you finished recording on a disc.
¡ID3Tag character information is not displayed. A file in which character information was recorded by use of
ID3Tag 2.0 or later version may not be reproduced normally. For example, the file playing time may not be displayed
correctly.
¡Packet writing software is not supported.
¡A playlist function is not supported. Record files and folders in the order in which you want them to be played.
Some writing software lets you specify the recording order by adding a prefix in the range of “01” - “99”, etc. to the
file name. For details refer to the user manual of your writing software.
Note: You may encounter trouble in playing MP3s or displaying the information of MP3 files recorded with certain
writing softwares or CD recorders (CD-R/RW drives).
Caution: Never assign the “.mp3” file name extension to a file that is not in the MP3 format. This may not only
produce noise from the speakers and speaker damage, but can damage your hearing.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
16
Maximum number of files / folders
¡Maximum number of trees: 8
¡Maximum number of files / folders: 254 (files + folders. Root folder is not included.)
Note: If the total of files and folders exceeds 254, successful playback may not be performed.
Supported file systems and file names
Supported file system
Displayable folder names and file names
Name files and folders in accordance with the standard of each file system.
Refer to the instructions of writing software for details.
ISO 9660 Level 1
¡This player can display file names of up to 30 letters in scroll mode.
* Up to 15 letters can be displayed when scrolling in the Joliet system.
¡The unit recognizes only ASCII character set and some of special characters.
German special character (ß), French special characters (ç, é, è, ê, ë, î, ï, œ)
etc. will be converted into an asterisk (*).
ISO 9660 Level 2
Joliet*
ASCII character set
Special Characters
À Á Â Ã Å à á â ã å
ASCII character set consisting of A to
Z, a to z, digits 0 to 9, and the follow-
ing symbols: (space) ! ” # $ % & ’ ( )
Romeo
~
Ä ä
* + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | }
UD
UD
(However, lowercase characters are
represented as uppercase characters
in this unit.)
Ò Ó Ô Õ Ö ò ó ô õ ö
Apple Extension to ISO 9660
Ù Ú Û Ü ù ú û ü
UD
Glossary
ISO 9660
Disc-at-Once
A method of writing data in a media by just one operation
and no more writing after that.
The most common international standard for the logical
format for files and directories.
APPLE HFS
ID3Tag
The file system used by the Macintosh operating system
A function that allows character information (title, artist,
album title, date, etc.) to be written onto the disc.
(Not displayed a Page 18).
to organize data. (Not supported)
Multi-session
A method of adding data incrementally to a CD-R or CD-
RW in more than one recording session.
Packet writing
A method of writing data on a CD media in small
increments. (Not supported)
Copyright
It is prohibited by copyright laws to copy, distribute and deliver copyrighted materials such as music without the approval
of copyright holder except enjoying yourself personally.
Note: MP3 encode software and writing software are not supplied to this model.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
CD Changer Control
CD changer functions are designed for
optional Panasonic CD changer unit.
(a Page 26 for connection)
S
H
Listening to a CD Changer
(When the magazine is in the player...)
17
Mode Selection
Insert the Magazine
Press [SOURCE] to select the CD changer mode.
Playback starts.
s
REP
R
LOUD
Disc Selection
[}] : Next disc.
[{] : Previous disc.
Track Selection
[fTRACK] : Advance to the next track.
[aTRACK] : Back to beginning of the current track.
Back to previous track. (Press twice)
Example: CD Changer CX-DP88N (Option)
Fast Forward / Fast Reverse
Press and hold
Notes:
[2TRACK] : Fast forward.
[1TRACK] : Fast reverse.
Release to resume the playback.
¡“CDC 0000” is displayed when no disc is loaded in the
magazine.
¡The unit returns to previous mode when the magazine
is ejected in the CD changer mode.
¡CD text is not supported in the CD changer mode.
CD text can not be displayed even if a CD changer
capable of recognizing CD text is connected.
(CX-DP9061EN, for example.)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
18
Playing Time
Disc Number
Track Number
PM
A
MONO/LOC
PTY
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
BAND
VOL
SEL
PWR
TUNE
TRACK
SOURCE
Disc
s
R
REP
REMOTE
LOUD
.
.
EON PTY CT
DISP
CT
AF
Selection
RANDOM
SCAN
REPEAT
LOUD
REG
FOLDER
4
5
6
1
2
3
MUTE
TA
Random Scan Repeat
Display Change
Press [DISP] to switch the display as follows.
Track number/Track playing time/
Disc number (default)
s
REP
R
LOUD
¡•
Clock display
CT
s
REP
R
LOUD
Press [4] (RANDOM).
Press again to cancel.
s
REP
R
All tracks
LOUD
LOUD
Lights
Random Play
Scan Play
Press and hold [4] (RANDOM) for
more than 2 seconds.
Press and hold again to cancel.
All tracks on
the current disc
s
REP
R
Blinks
Press [5] (SCAN).
Press again to cancel.
s
REP
R
All tracks
LOUD
Blinks
Press and hold [5] (SCAN) for
more than 2 seconds.
Press and hold again to cancel.
1st track on
each disc
First 10 sec. of
each track
s
REP
R
LOUD
LOUD
LOUD
Blinks
Press [6] (REPEAT).
Press again to cancel.
s
REP
R
Current track
Current disc
Lights
Repeat Play
Press and hold [6] (REPEAT) for
more than 2 seconds.
Press and hold again to cancel.
s
REP
R
Blinks
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Installation
Supplied Hardware
S
H
Preparation
No.
Item
Diagram Q’ty
19 ¡Before installation, check the radio operation with
antenna and speakers.
Mounting Collar
1
q
¡Disconnect the cable from the negative (–) battery
terminal (see caution below).
¡Unit should be installed in a horizontal position with the
front end up at a convenient angle, but not more than
30°.
Mounting Bolt (5 mmø)
Power Connector
1
1
w
e
Removable Face Plate Case
Trim Plate
1
1
1
r
t
y
30° or less
ISO Antenna Adapter
Caution: Do not disconnect the battery terminals of a
car with trip or navigational computer since all user
settings stored in memory will be lost. Instead take
extra care with installing the unit to prevent shorts.
Methods for Fixing the Rear of the Unit
Dashboard Installation
Installation Opening
(a) Using the Rear Support Strap (Option)
The unit can be installed
in any dashboard having
an opening as shown at
right. The dashboard
53 mm
Fire Wall of Car
3 mmø
Tapping Screw (Option)
182 mm
should be 4.5 mm - 6 mm
thick in order to be able to support the unit.
Hex. Nut (Option)
Installation Precautions
This product should be installed by a professional
installer, if possible.
Rear Support Strap (Option)
w Mounting Bolt
In case of difficulty, please consult your nearest authorized
Panasonic Service Center.
q Mounting Collar
1. This system is to be used only in a 12-volt, DC battery
system (car) with negative ground.
2. Follow the electrical connections carefully (a Page 26).
Failure to do so may result in damage to the unit.
3. Connect the power lead (red) after all other connections
are made.
4. Be sure to connect the battery lead (yellow) to the positive
terminal (+) of the battery or fuse block (BAT) terminal.
5. Insulate all exposed wires to prevent short circuiting.
6. Secure all loose wires after installing the unit.
7. Please carefully read the operating and installation
instructions of the respective equipment before
connecting it to this unit.
(b) Using the Rubber Cushion (Option)
Rear Support Bracket
(Provided on the car)
Rubber Cushion
(Option)
w Mounting Bolt
q Mounting Collar
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
Cautions:
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.
20
Insert Mounting Collar q into the
dashboard, and bend the mounting
tabs out with a screwdriver.
First complete the electrical connections, and then
check them for correctness. (a Page 26)
1
The tabs to be bent vary depending on
the car. To securely install the unit, fully
bend a number of the tabs so that there
is no rattling.
Tab
Example:
q Mounting Collar
Lock Lever (C)
e Power Connector
Mounting Tabs
w Mounting Bolt
Secure the rear of the unit.
After fixing Mounting Bolt w and Power
Connector e, fix the rear of the unit to the
car body by either method (a) or (b) shown
on the previous page.
2
3
4
Insert Trim Plate t.
After installation reconnect the
negative (–) battery terminal.
Make sure that the lock lever (C)
is flush with the mounting collar
(not projecting outward).
Lock Lever
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Installation
(continued)
S
H
To Remove the Unit
q
Pull out
q
Remove the removable face plate.
(a) Press the release
21
button [
].
MONO/LOC
PTY
PWR
w
SOURCE
(b) Pull on the right side of the unit.
Remove the Trim Plate t with a screwdriver.
w
t Trim Plate
Screwdriver
1
Contact
2
Pull out the unit while pushing down the lock
lever with a screwdriver.
e
Lock Lever
Screwdriver
Remove the unit pulling with both hands.
r
Cautions:
¡Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Anti-Theft System
This unit is equipped with a removable face plate. Removing
this face plate makes the radio totally inoperable.
S
H
r Removable Face Plate Case
22
Place Removable Face Plate
into Case
q Switch off the power of the unit.
w Remove the removable face plate. (a Page 24)
e Gently press the bottom of the case and open the cover.
Place the face plate into the case and take it with you
when you leave the car.
Cautions:
¡This face plate is not water-proof. Do not expose it to water or excessive moisture.
¡Do not remove the face plate while driving your car.
¡Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.
Install Removable Face Plate
w
q Slide the left side of the removable face plate in place.
w Press the right end of removable face plate until “click” is
heard.
q
Panel Removal Alarm
This alarm sounds to warn you not to forget to remove the
A
PM
MONO/LOC
CQ-RDP472N CD RECEIVER WITH CHANGER CONTROL
panel before leaving your car.
BAND
PTY
VOL
SEL
PWR
TUNE
TRACK
SOURCE
PANEL
REMOTE
.
.
EON PTY CT
DISP
CT
AF
RANDOM
SCAN
5
REPEAT
6
LOUD
REG
FOLDER
1
2
3
4
MUTE
TA
Press and hold [SEL] to switch between “ALRM ON” or
“ALRM OFF” in turn.
“PANEL” is displayed and an alarm sounds when
turning off the power of this unit or turning the
ignition switch of your car to OFF while the panel
removal alarm is set to ON.
ALRM ON
ALRM OFF
Panel removal alarm
is not activated.
Panel removal alarm
is activated.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Electrical Connections
S
H
Cautions:
Wiring Diagram
¡Check the connectors provided on your car (see
precaution below) before connecting the system.
¡This unit is designed for use in a car having a 12-
volt negative ground battery system.
Example: Connection with CD changer CX-DP88N (Option)
23
¡To prevent damage to the unit, be sure to follow the
connection diagram.
¡Strip about 5 mm of the lead ends for connection
(only non-ISO connector cords).
¡Do not insert the power connector into the unit
until the wiring is completed.
RCA Cord
CQ-RDP472N
¡Be sure to insulate any exposed wires to prevent
short circuiting with the car chassis. Bundle all
cables, and prevent cable terminals from touching
any metal parts.
(L) (White)
CD Changer
Antenna
Control Connector
(R) (Red)
Precautions (ISO Connector)
(L) (White)
(R) (Red)
¡The pin arrangement of the power connector
conforms to ISO standard.
¡The pin arrangement of ISO connectors in some
cars may differ from the ISO standard.
¡Please check that the pin arrangement of the
connector in your car conforms to ISO standard.
¡For car types A and B, change the wiring of the
red and yellow leads as shown at below.
¡After connection, insulate the portions marked
(C) with insulating tape.
y ISO Antenna
Adapter
(If needed)
Preamp Out
Connector (Rear)
CD Changer
Input Connector
Note: For cars other than types A and B, please
consult your local car shop.
ISO
Standard ISO
A7: IGN or ACC switched 12 V supply
C
(Red)
A7
(Red)
ACC
BATTERY 15A
(Yellow)C (Yellow)
A4
A4: +12 V Battery (Permanent supply)
A
Car Type A
A7: +12 V Battery (Permanent supply)
C
(Red)
(Yellow)
BATTERY 15A
ACC
(Yellow)
(Red)
C
A4: IGN or ACC switched 12 V supply
B
Car Type B
A7: +12 V Battery (Permanent supply)
C
(Red)
(Red)
ACC
BATTERY 15A
C
(Yellow) (Yellow)
A4: No connection
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
¡This unit can be connected to an optional CD changer (CX-
DP9061/DP9060EN, CX-DP88N, CX-DP801/DP803EN, CX-
DP601EN or CX-DP1212N) and optional extension cord.
¡For details consult your nearest authorized Panasonic Dealer.
¡For connection to a CD changer, refer to the operating
instructions of the CD changer (CX-DP9061/DP9060EN, CX-
DP88N, CX-DP801/DP803EN, CX-DP601EN or CX-DP1212N).
24
CD Changer
CX-DP88N
Ground Lead (Black)
To a clean, bare metallic part
of the car chassis
Extension Cord
(DIN/BATT/RCA/GND)
Battery Lead (Yellow)
To the car battery, continuous +12 V DC
Fuse (3 A)
DIN Cord
C1 : External Mute Lead (Orange)
Telephone Mute: Connect to the car telephone mute lead.
Note: The telephone mute lead is only for connection to the
radio mute lead. Output other than telephone will not be muted
Navi Mute: To the Navi Mute lead of the Panasonic car navigation
system.
e Power
Telephone Mute: The sound from the speakers cannot be
heard while the telephone conversation is in progress.
Navi Mute: The sound from the speakers cannot be heard
while the navigation guide is on.
Connector
(Orange)
.
A5* : Amp Relay Control Power Lead (Blue)
(Max. 500 mA)* This lead is for connection to
a Panasonic power amplifier.
A5* (Blue)
A8 : Ground Lead (Black)
ISO Connector A (Black)
A7 (Red)
To a clean, bare metallic part of the car chassis.
ACC
A7 : Power Lead (ACC or IGN) (Red)
To ACC power, +12 V DC.
Resistor (1 kΩ)
A8 (Black)
A5* : Motor Antenna Relay Control Lead (Blue)
A5 (Blue)
To Motor Antenna (Max. 500 mA)*. This lead is
A4 (Yellow)
not intended for use with a switch actuated
power antenna.
Note: The power antenna extends automatically
when the power of this unit is turned on.
BATTERY 15A
Fuse (15 A)
A4 : Battery Lead (Yellow)
To the car battery, continuous +12 V DC.
ISO Connector B (Brown)
B8 (Green w/black stripe)
B6 (White w/black stripe)
B4 (Gray w/black stripe)
B2 (Violet w/black stripe)
Speakers
B7 (Green)
B8 : Rear Left –
B7 : Rear Left +
B6 : Front Left –
B5 : Front Left +
B4 : Front Right –
B3 : Front Right +
B2 : Rear Right –
B1 : Rear Right +
B5 (White )
B3 (Gray)
B1 (Violet )
.
A5*: This lead can be used as either Amp Relay Control Power Lead or Motor Antenna Relay Control Lead, or both at
the same time. However, the current capacity of this lead is 500 mA.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
H
Speaker Connections
Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
25
¡Use ungrounded speaker only.
¡The maximum speaker output should be 45 W or more. (If used with
the optional power amplifier, the speaker output should be higher than
the maximum amplifier output.)
¡The speaker impedance should be 4 - 8 Ω.
¡This unit uses the BTCL circuit, so each speaker should be connected
separately using parallel vinyl insulated cords.
¡The speaker cords and the power amplifier unit should be kept away
(about 30 cm apart) from the antenna and antenna extension cord.
¡Never connect the speaker cord to
the body of the car.
¡Do not use a 3-wire type speaker
system having a common earth
lead.
¡Do not connect more than one
speaker to one set of speaker
leads.
Fuse
Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the unit.
If the replacement fuse fails, contact your nearest authorized Panasonic Service Center.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
Maintenance
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior
cleaning. Never use benzine, thinner, or other solvents.
I
S
H
26
(
)
Notes on CD / CD Media CD-ROM, CD-R, CD-RW
If you use commercial CDs, they must have
either of these labels shown at right.
TEXT
How to hold the disc
¡Do not touch the underside of the disc.
Label side
¡Do not scratch on the disc.
¡Do not bend disc.
¡When not in use, keep disc in the case.
Do not use irregularly shaped discs.
Do not leave discs in the following places:
¡Direct sunlight
¡Near car heaters
¡Dirty, dusty and damp areas
¡Seats and dashboards
Do not use irregularly shaped discs.
<Wrong>
<Right>
Disc cleaning
Use a dry, soft cloth to wipe from the center outward.
Caution on new discs
A new disc may have rough edges on its inner and outer
perimeter. These may cause malfunction.
Remove the rough edges using a pencil, etc.
Rough edge
Do not attach any seals or labels to your discs.
Do not write on the disc label in a heavy pen or
ballpoint pen.
Notes on CD-Rs/RWs
¡You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due to
their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.
¡CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them inside
a car for extended periods may damage and make playback impossible.
¡Some CD-R/RWs cannot be played back successfully thanks to incompatibility among writing software, a CD recorder
(CD-R/RW drive) and the discs.
¡This player cannot play the CD-R/RW discs if the session is not closed.
¡This player cannot play the CD-R/RW discs which contains other than CD-DA or MP3 data (Video CD, etc.).
¡Be sure to observe the instructions of CD-R/RW disc for handling it.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Troubleshooting
S
H
Cautions:
¡Do not use the unit if it malfunctions or
something is wrong.
¡Do not use the unit in an irregular condition,
for example, without sound, or with smoke or
foul smell, which can cause ignition or electric
shock. Immediately stop using the unit and
call the store where you purchased it.
Preliminary Steps
Check and take steps as described in the tables below.
27
If You Suspect Something Wrong
Immediately switch power off.
Disconnect the power cable and check that there is neither
smoke nor heat from the unit before asking for repairs. Never try
to repair the unit yourself because it is dangerous to do so.
Product Service
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
Panasonic Service Center. The product should be serviced only by a qualified technician.
■ Common
Problem
Possible cause / Possible solution
Car’s engine switch is not on.
aTurn your car’s ignition switch to ACC or ON.
Cables are not correctly connected.
aConnect cables correctly.
Battery cable: Connect the battery cable to the terminal that is always live.
Accessory cable: Connect the accessory cable to your car’s ACC source.
Grounding wire: Connect the grounding wire to a metal part of your car.
No power.
Fuse is burnt.
a
Call the store where you purchased the unit, or your nearest Panasonic
Service Center and ask for replacement fuse.
Mute is set to ON.
aSet it to OFF.
Cables are not correctly connected.
aConnect cables correctly.
No sound.
External Mute lead is not correctly connected.
aConnect the External Mute lead correctly.
Condensation (dew).
aWait for a while before use.
A mobile phone is used near the unit.
aKeep the mobile phone away from the unit.
Noise.
Audio sound is output
but the display shows
demonstration message.
Demonstration mode is ON.
a Press [DISP] to cancel demonstration mode.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
■ Radio
H
28
Problem
Possible cause / Possible solution
Station is too far, or signals are too weak.
aSelect other stations of higher signal level.
Poor reception of FM
stereo and monaural
broadcasts.
The radio antenna is not extended enough.
aExtend the radio antenna enough.
The motor antenna relay control lead is not connected correctly.
aIf there is a motor antenna in the car, connect the motor antenna relay
control lead to the motor antenna lead that is installed in the car correctly.
Battery cable is not correctly connected.
aConnect the battery cable to the terminal that is always live.
Preset station is reset.
■ CD / MP3
Problem
Possible cause / Possible solution
Disc is upside down.
aPlace disc in the correct direction with the label side up.
Disc is dirty.
aClean disc, referring to the section on “Notes on CD / CD Media (CD-ROM,
Disc is in the CD
CD-R, CD-RW)” (a Page 29).
compartment but no
sound is made, or disc
is ejected automatically.
A disc that has data other than CD-DA or MP3 type is loaded.
aDiscs that have CD-DA or MP3 type data should be used.
aSome CD-R/RWs cannot be played back successfully thanks to
incompatibility among writing software, a CD recorder (CD-R/RW drive)
and the discs. Refer to instructions for the concerned devices for details.
Disc is dirty.
aClean disc, referring to the section on “Notes on CD / CD Media (CD-ROM,
Sound skips, bad
sound quality. (e.g.
caused by noise)
CD-R, CD-RW)” (a Page 29).
aSome CD-R/RWs cannot be played back successfully thanks to
incompatibility among writing software, a CD recorder (CD-R/RW drive)
and the discs. Refer to instructions for the concerned devices for details.
Mounting angle is over 30 degrees.
aAdjust mounting angle to less than 30 degrees.
Sound skip due to
vibration.
Unstable mounting.
aMount the unit securely with the mounting parts, referring to the section
on Installation.
¡Disc is defective.
¡Mechanical trouble.
Disc is not ejected.
aPress [u]. If normal operation is not restored, call the store where you
purchased the unit or the nearest Panasonic Service Center to ask for
repairs.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
(continued)
Troubleshooting
■ CD
S
H
Problem
Possible cause / Possible solution
29
Disc is dirty, or has scratches.
aClean disc, referring to the section on “Notes on CD / CD Media (CD-ROM,
CD-R, CD-RW)” (a Page 29).
CD text is not
displayed normally.
The 1st track of a mix mode disc was reproduced. (Mix mode is a format in
which data except music is recorded on the 1st track and music data is recorded
on other than the 1st track in a session.)
Time is counted but no
sound comes out.
aPlayback music data recorded on other than the 1st track.
■ MP3
Problem
Possible cause / Possible solution
The disc does not conform to any of the file systems supported by this player.
aInsert a disc that conforms to the file systems supported by this player.
For supported file systems, see “Points to remember when recording an
MP3 disc” (a Page 18).
No playback.
The MP3 file is missing the “.mp3” file name extension.
aMake sure to add the “.mp3” extension to each MP3 file name.
The folders and files recorded on the disc are layered too much.
aAs checking of files takes longer in this case, do not record any
unnecessary folders or files other than MP3s on the disc.
(If there are many hierarchies of files and folders, it may take up to 150
seconds to start playback.)
It takes too long for
playback to start.
aThe recording quality differs depending on the encoding software used,
and on settings such as the bit rate. Set the bit rate within the range
specified in the specifications chart (a Page 35).
Poor recording quality,
sound skipping.
It is recommended to set the bit rate to “128 kbps or more” and “Fixed”.
High-speed writing was executed when MP3 data was recorded on the disc.
aDecrease writing speed as low as possible.
Files or folders are not recorded in the desired playback order.
aSome writing software lets you specify the recording order by adding a
prefix in the range of “01” - “99”, etc. to the file name. For details refer
to the user manual of your writing software.
Files are not played in
the desired order.
The disc does not conform to the file systems supported by this player.
aInsert a disc that conforms to the file systems supported by this player.
For supported file systems see “Points to remember when recording an
MP3 disc” (a Page 18).
Folder / file name is not
displayed correctly.
a
There may be a problem with your writing software or CD recorder (CD-
R/RW drive). For details refer to the user manual of your writing software
.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
S
■ MP3 (Continued)
H
30
Problem
Possible cause / Possible solution
You ran the file in fast forward or fast reverse during playback or turned off the
ignition switch of the car during playback.
aPlaying another file will return the file playing time to normal.
You played a VBR (Variable Bit Rate) format MP3 file.
aThe file playing time of VBR (Variable Bit Rate) format MP3 file is
sometimes displayed incorrectly.
File playing time is not
displayed correctly.
You played a file in which character information had been recorded by use of
ID3Tag 2.0 or later version.
aA file in which character information was recorded by use of ID3Tag 2.0
or later version may not be reproduced normally. For example, the file
playing time may not be displayed correctly.
■ Sound Setting
Problem
Possible cause / Possible solution
Left and right balance, or front and rear balance is off on one side.
aAdjust balance / fader as appropriate (a Page 7).
No sound from left,
right, front, or rear
speaker.
Cables are not correctly connected.
aConnect the cables correctly.
The speaker leads are connected in reverse between right and left.
aConnect the speaker leads to the correct one.
Left and right sounds
are reversed.
■ Remote Control
Problem
Possible cause / Possible solution
Battery polarities (+) (–) are reversed.
aInsert the battery correctly.
Wrong battery.
aCheck the battery.
Buttons are invalid for
operation.
Battery has run down.
aReplace the battery.
Remote control is in the wrong direction.
aDirect the remote controller at REMOTE (sensor) on the panel.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
(continued)
Troubleshooting
S
H
Error Display Messages
■ CD / MP3
31
Display
Possible cause / Possible solution
¡•
¡•
¡Disc is dirty, or is upside down.
¡A disc that has data other than CD-DA or MP3 type is loaded.
s
REP
R
LOUD
s
REP
R
Disc has scratches.
LOUD
a Check disc.
The disc ejected automatically
No operation by some cause.
¡•
s
REP
R
LOUD
a
If normal operation is not restored, call the store where you purchased
the unit or the nearest Panasonic Service Center to ask for repairs.
Return to previous mode
When there is no MP3 files in the specified folder during direct MP3 folder selection.
a Select another folder which contains MP3 files.
The player for some reason cannot read the file you are trying to play. (File
recorded in an unsupported file system, compression scheme, data format,
file name extension, damaged data, etc.)
a Select a file that the player can read. Confirm the type of data recorded
on the disc. Create a new disc if necessary.
¡•
s
REP
R
LOUD
■ CD Changer
Display
Possible cause / Possible solution
¡Disc is dirty, or is upside down.
s
REP
R
LOUD
¡A disc other than a music CD (CD-DA type) is loaded.
Disc has scratches.
LOUD
Disc Number
To next disc automatically
a Check disc.
No operation by some cause.
a Press the reset switch on the CD changer. If normal operation is not
restored, call the store where you purchased the unit or the nearest
Panasonic Service Center to ask for repairs.
¡•
s
REP
R
LOUD
The display continues if you cannot switch off the power.
No disc is in the changer (magazine).
a Insert discs into the changer (magazine).
¡•
s
REP
R
LOUD
Notes:
¡Some CD changers will let this unit to be turned off after “CDC -E3-” error message appears.
¡For details refer to the operating instructions of your CD changer.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
E
N
G
L
I
Specifications
General
CD Player
S
H
Power Supply
: DC 12 V (11 V - 16 V), Test
Voltage 14.4 V, Negative
Ground
Sampling Frequency
DA Converter
Error Correction System
: 8 times oversampling
: MASH•1 bit/4 DAC System
: Panasonic Super Decoding
Algorithm
: Astigma 3-beam
: Semiconductor laser
: 780 nm
32
Tone Controls
: Bass; 12 dB at 100 Hz
: Treble; 12 dB at 10 kHz
: Less than 2.5 A (CD mode,
0.5 W 4-Speaker)
Pick-Up Type
Light Source
Wavelength
Current Consumption
Maximum Power Output : 45 W x 4 (at 4 Ω)
Frequency Response
: 20 W x 4 (DIN45 324, at 4 Ω) Signal to Noise Ratio
: 20 Hz - 20 kHz ( 1 dB)
: 96 dB
Power Output
Pre-Amp Output Voltage
: 2 V (CD mode)
Total Harmonic Distortion : 0.01 % (1 kHz)
Pre-Amp Output Impedance: 200 Ω
Wow and Flutter
Channel Separation
: Below measurable limits
: 70 dB
Speaker Impedance
Dimensions
Weight
: 4 - 8 Ω
:
178 (W) x 50 (H) x 150 (D) mm
: 1.5 kg
MP3 decoding
Bit Rate
: MPEG 1 Audio Layer 3
MPEG 2 Audio Layer 3
FM Stereo Radio
(MPEG 1 Audio Layer 3) : 32 kbps - 256 kbps,
VBR (Variable Bit Rate)
(MPEG 2 Audio Layer 3) : 16 kbps - 160 kbps,
VBR (Variable Bit Rate)
Frequency Range
Usable Sensitivity
Stereo Separation
: 87.5 - 108 MHz
: 6 dB/µV (S/N 30 dB)
: 35 dB (at 1 kHz)
MW Radio
Sampling Frequency
(MPEG 1 Audio Layer 3) : 32 kHz, 44.1 kHz, 48 kHz
(MPEG 2 Audio Layer 3) : 22.05 kHz, 24 kHz
Frequency Range
Usable Sensitivity
: 531 - 1,602 kHz
: 28 dB/µV (S/N 20 dB)
LW Radio
Frequency Range
Usable Sensitivity
: 153 - 279 kHz
: 32 dB/µV (S/N 20 dB)
Note: Specifications and design are subject to modification without notice due to improvements.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-RDP472N
Matsushita Electric Industrial Co., Ltd.
Central P.O. Box 288, Osaka 542-8588, Japan
Dalian Matsushita Communication Industrial Co., Ltd.
Daxinzhaizi, Ganjingzi District, Dalian, China P.C. 116033
YEFM283841 D0102-0
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|