Panasonic Answering Machine KX TG1840NZ User Manual

Operating Instructions  
Digital Cordless Answering System  
Model No.  
KX-TG1840NZ  
This unit is Caller ID compatible. To display the caller’s phone  
number, you must subscribe to Caller ID service.  
Charge the batteries for about 7 hours before initial use.  
Please read these operating instructions before using the unit and save them for  
future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Feature highlights  
Feature highlights  
Phonebooks  
This unit provides the handset phonebook (200 names and phone  
numbers; page 18) and the shared phonebook (20 names and phone  
numbers; page 21). These phonebooks allow you to make calls without  
having to dial manually. For handset phonebook, you can assign each  
handset phonebook entry to the desired category, and search for handset  
phonebook entries by name or category.  
Handset phonebook category  
If you subscribe to Caller ID service, handset phonebook categories (page  
18) can help you identify who is calling by using different ringtones for  
different categories of callers (page 35).  
Tom  
Audible call for shared phonebook  
Tom  
Audible call allows you to know who is calling without looking at the display.  
If you record an audible call announcement for a shared phonebook entry  
(page 21), the audible call recording will be announced when you receive  
a call from that person.  
Tom  
Audible call is available only after subscribing to Caller ID service (page  
35).  
Night mode  
Night mode allows you to select a block of time during which the  
handset/base unit will not ring, useful if you do not want to be disturbed, for  
example, while sleeping.  
Night mode can be set independently for the handset (page 26) and base  
unit (page 31).  
Digital answering system  
Digital answering system allows the unit to answer and record calls for you  
when you are unavailable to answer the phone (page 38).  
Polyphonic ringtones  
You can change the ringtone heard when the unit rings for calls. For  
handset, you can choose from 5 ringtones and 10 melody tones for outside  
calls and intercom calls (page 25). For base unit, you can choose from 6  
ringtones for outside calls (page 17).  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Preparation  
Answering System Features  
Accessory information . . . . . . . . . . . . . . .5  
Important information . . . . . . . . . . . . . . . .6  
Controls and displays. . . . . . . . . . . . . . . .7  
Connections . . . . . . . . . . . . . . . . . . . . . . .9  
Battery installation . . . . . . . . . . . . . . . . .10  
Battery charge . . . . . . . . . . . . . . . . . . . .10  
Battery replacement . . . . . . . . . . . . . . . .11  
Turning the power on/off. . . . . . . . . . . . .11  
Setting the date and time . . . . . . . . . . . .11  
Answering system . . . . . . . . . . . . . . . . .38  
Turning the answering system on/off . . .38  
Greeting message . . . . . . . . . . . . . . . . .38  
Listening to messages . . . . . . . . . . . . . .39  
Recording a voice memo using the handset  
41  
Direct command operation using the  
handset . . . . . . . . . . . . . . . . . . . . . . . . .41  
Remote operation. . . . . . . . . . . . . . . . . .42  
Guide to answering system settings . . .43  
Making/Answering Calls  
Multi-unit Operation  
Making calls using the handset . . . . . . .13  
Making calls using the base unit . . . . . .15  
Answering calls using the handset. . . . .17  
Answering calls using the base unit . . . .17  
Operating additional units . . . . . . . . . . .46  
Registering a handset to a base unit . . .46  
Intercom . . . . . . . . . . . . . . . . . . . . . . . . .48  
Transferring calls, conference calls . . . .49  
Phonebooks  
Handset phonebook . . . . . . . . . . . . . . . .18  
Shared phonebook. . . . . . . . . . . . . . . . .21  
Copying phonebook entries . . . . . . . . . .23  
Useful Information  
Wall mounting . . . . . . . . . . . . . . . . . . . .51  
Available character entries. . . . . . . . . . .52  
Troubleshooting . . . . . . . . . . . . . . . . . . .54  
Specifications. . . . . . . . . . . . . . . . . . . . .58  
Handset Settings  
Guide to handset settings. . . . . . . . . . . .24  
Time settings . . . . . . . . . . . . . . . . . . . . .25  
Ringer setup. . . . . . . . . . . . . . . . . . . . . .25  
Night mode. . . . . . . . . . . . . . . . . . . . . . .26  
Display setup . . . . . . . . . . . . . . . . . . . . .27  
Call options. . . . . . . . . . . . . . . . . . . . . . .28  
Other options . . . . . . . . . . . . . . . . . . . . .28  
Index  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Base Unit Settings  
Guide to base unit settings. . . . . . . . . . .30  
Ringer setup. . . . . . . . . . . . . . . . . . . . . .31  
Call options. . . . . . . . . . . . . . . . . . . . . . .32  
Other options . . . . . . . . . . . . . . . . . . . . .34  
Caller ID Service  
Using Caller ID service. . . . . . . . . . . . . .35  
Caller list. . . . . . . . . . . . . . . . . . . . . . . . .36  
Call minder . . . . . . . . . . . . . . . . . . . . . . .37  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Accessory information  
Included accessories  
AC adaptor  
PQLV19AL  
Telephone line cord  
Rechargeable batteries  
(AAA size)  
HHR-4EPT  
Handset cover  
Operating instructions  
Quick guide  
Additional/replacement accessories  
Model No.  
HHR-4EPT  
KX-TCA121AZ  
KX-A272  
Description  
2 rechargeable nickel metal hydride (Ni-MH) batteries  
Additional Digital Cordless Handset  
DECT repeater  
General Warning:  
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has  
accepted that the item complies with minimum conditions for connection to its network. It  
indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.  
Above all, it provides no assurance that any item will work correctly in all respects with  
another item of Telepermitted equipment of a different make or model, nor does it imply that  
any product is compatible with all of Telecom’s network services.  
Important Notice:  
Under power failure conditions, this telephone may not operate. Please ensure that a  
separate telephone, not dependent on local power, is available for emergency use.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Warning:  
L To prevent the risk of electrical shock, do  
not expose this product to rain or any  
other type of moisture.  
Important information  
General  
L Unplug this unit from power outlets if it  
emits smoke, an abnormal smell or makes  
unusual noise. These conditions can  
cause fire or electric shock. Confirm that  
smoke has stopped and contact an  
authorised service centre.  
L Use only the AC adaptor included with this  
product, noted on page 5.  
L Do not connect the AC adaptor to any AC  
outlet other than a standard 220–240 V  
AC outlet.  
L This product is unable to make calls when:  
– The portable handset battery(ies) need  
recharging or have failed.  
Location  
L For maximum distance and noise-free  
operation, place your base unit:  
– There is a power failure.  
– Away from electrical appliances such as  
TVs, radios, personal computers or  
other phones.  
– The key lock feature is turned on.  
– The call bar feature is turned on (only  
phone numbers stored in the unit as  
emergency numbers can be called).  
– In a convenient, high and central  
location.  
L Do not open the base unit or handset  
other than to replace the battery(ies).  
Battery caution  
L This product should not be used near  
emergency/intensive care medical  
equipment and should not be used by  
people with pacemakers.  
L We recommend using the battery(ies)  
noted on page 5. Use only rechargeable  
battery(ies).  
L Do not mix old and new batteries.  
L Care should be taken that objects do not  
fall onto, and liquids are not spilled into,  
the unit. Do not subject this product to  
excessive smoke, dust, mechanical  
vibration or shock.  
L Do not dispose of the battery(ies) in a fire,  
as they may explode. Check local waste  
management codes for special disposal  
instructions.  
L Do not open or mutilate the battery(ies).  
Released electrolyte from the battery(ies)  
is corrosive and may cause burns or injury  
to the eyes or skin. The electrolyte may be  
toxic if swallowed.  
Environment  
L Do not use this product near water.  
L This product should be kept away from  
heat sources such as radiators, cookers,  
etc. It should also not be placed in rooms  
where the temperature is less than 5 °C or  
greater than 40 °C.  
L Exercise care when handling the  
battery(ies). Do not allow conductive  
materials such as rings, bracelets or keys  
to touch the battery(ies), otherwise a short  
circuit may cause the battery(ies) and/or  
the conductive material to overheat and  
cause burns.  
L The AC adaptor is used as the main  
disconnect device. Ensure that the AC  
outlet is installed near the unit and is  
easily accessible.  
L Charge the battery(ies) in accordance  
with the information provided in these  
operating instructions.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
L Only use the included base unit (or  
charger) to charge the battery(ies). Do not  
tamper with the base unit (or charger).  
Failure to follow these instructions may  
cause the battery(ies) to swell or explode.  
Controls and displays  
Controls  
Handset  
A
I
J
K
C
D
E
F
L
M
G
B
G
N
H
d
g
g
N
n
L
a
N
n
O
P
H
A Speaker  
B Charge contact  
C {j/OK} (Menu/OK)  
D {k} (Phonebook)  
E {C} (Talk)  
F Navigator key  
L {e}{v}: To search for the desired  
item in menus.  
L {>}: To select the desired item or  
move the cursor to the right.  
L {<}: To return to the previous screen  
or move the cursor to the left.  
G {s} (Speakerphone)  
H {R} (Recall)  
I Receiver  
J Display  
K {R} (Redial/Pause)  
L {ih} (Off/Power)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
M {C/T} (Clear/Mute)  
N Dial keypad  
I {R} (Recall)  
J {R} (Redial/Pause)  
K {T} (Mute)  
L Microphone  
L The icons printed below the dial keys  
shown in the illustration (g, d, etc.)  
indicate answering system operations.  
M {s} (Speakerphone)/Speakerphone  
indicator  
O {INT} (Intercom)  
P Microphone  
N In use indicator  
Note:  
L Lights when a handset is in use (on a  
call, editing the shared phonebook,  
using the answering system, etc.).  
L Up to 3 menu items can be displayed at a  
time. To select a menu item not shown on  
the current page, scroll up or down by  
pressing the navigator key, {e} or {v},  
respectively.  
L Flashes when a call is being received  
or when the answering system is  
answering a call.  
O {5} (Play/Stop)  
Base unit  
Displays  
A
B
C D E F  
G
Handset display icons  
Various icons appear on the handset display  
to indicate the current status of the unit.  
Display  
icon  
Meaning  
w
Within range of a base unit  
L When flashing: Handset  
is searching for base unit.  
(out of range of base unit,  
handset is not registered  
to base unit, no power on  
base unit)  
H I J K L M N  
O
A Speaker  
L
Handset is accessing base  
unit. (intercom, paging,  
changingbaseunitsettings,  
etc.)  
B Charge contact  
C Display  
D {Answer on}/Answer on indicator  
E {d} (Greeting)  
F {4} (Erase)  
k
Handset is on an outside  
call.  
o
Call bar is on. (page 28)  
G Navigator key  
u
Answering system is on.  
(page 38)  
L {>}{<}: To adjust the ringer and  
speaker volumes.  
L {<}{>}: To select the desired  
ringtone or to repeat or skip the  
recorded messages.  
5
Battery strength  
[VE]  
Voice enhancer is set to  
high or low tone. (page 14)  
H {x} (Page)  
[N]  
Night mode is on. (page 26)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Display  
icon  
Meaning  
Connections  
[X]  
[2]  
Key lock is on. (page 14)  
When the AC adaptor is connected, a short  
beep will be heard. If it is not heard, check  
the connections.  
Handset number: The left  
icon shows handset 2  
example. (page 27)  
-2-  
Base unit number: The left  
icon shows base unit 2  
example. (page 27)  
0
New call minder message  
received (call minder users  
only; page 37)  
Hook  
The base unit is on a call.  
Another handset is on a call  
or is using the answering  
system.  
Base unit display icons  
Following icons appear on the base unit  
display to indicate the current status of the  
unit.  
Display  
icon  
Meaning  
(220–240 V, 50 Hz)  
d
Answering system will  
answer calls with a greeting  
message and caller  
To telephone  
network  
message will not be  
recorded. (page 44)  
Important:  
U
Ringer volume is off. (page  
17)  
L Use only the AC adaptor and telephone  
line cord supplied with this unit.  
Note:  
L After connection, you must charge the  
batteries to make or answer calls with the  
handset (page 10).  
L Never install telephone wiring during a  
lightning storm.  
L The AC adaptor must remain connected  
at all times. (It is normal for the adaptor to  
feel warm during use.)  
L The AC adaptor should be connected to a  
vertically oriented or floor-mounted AC  
outlet. Do not connect the AC adaptor to a  
ceiling-mounted AC outlet, as the weight  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
of the adaptor may cause it to become  
disconnected.  
When charging, the battery icon is shown as  
follows.  
L The unit will not work during a power  
failure. We therefore recommend you also  
connect a standard telephone to the same  
telephone line using a T-adaptor. Your  
Panasonic sales shop can offer you more  
information about connection possibilities.  
When the batteries are fully charged, 5  
remains on the display.  
L The unit’s answering system will not  
answer incoming calls on your FaxAbility  
number.  
Battery installation  
1 Insert the batteries negative (T)  
terminal first.  
Note:  
2 Close the handset cover.  
L It is normal for the handset to feel warm  
during charging.  
L It takes 7 hours to fully charge the  
batteries, however, you can use the  
handset before the batteries are fully  
charged.  
L Clean the charge contacts (page 7) of the  
handset and base unit with a soft, dry  
cloth once a month, otherwise the  
batteries may not charge properly. Clean  
more often if the unit is exposed to grease,  
dust or high humidity.  
Note:  
L Use only rechargeable batteries (page  
5).  
Battery strength  
Battery icon  
5
Battery strength  
High  
Battery charge  
Place the handset on the base unit for  
about 7 hours before initial use.  
6
Medium  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
start charging, the batteries may leak  
electrolyte.  
Battery icon  
Battery strength  
7
Low  
When flashing: Needs  
to be charged.  
L Do not mix old and new batteries.  
1 Press the notch on the handset cover  
firmly and slide it in the direction of the  
arrow.  
Note:  
L When 7 flashes, recharge the handset  
batteries. 7 will continue to flash until  
the batteries have been charged for at  
least 15 minutes.  
L If the handset is turned off, it will be turned  
on automatically when it is placed on the  
base unit.  
Battery life  
After your Panasonic batteries are fully  
charged, you can expect the following  
performance:  
2 Remove the old batteries positive (S)  
terminal first and install the new ones.  
See page 10 for battery installation.  
Ni-MH batteries (700 mAh)  
Operation  
Operating time  
Turning the power on/off  
While in use (talking) 20 hours max.  
While not in use  
(standby)  
170 hours max.  
Power on  
Press {ih} for about 1 second.  
Note:  
L The display will change to the standby  
mode.  
L Actual battery performance depends on a  
combination of how often the handset is in  
use (talking) and how often it is not in use  
(standby).  
Power off  
Press {ih} for about 2 seconds.  
L The display will go blank.  
L Battery operating time may be shortened  
over time depending on usage conditions  
and ambient temperature.  
Setting the date and time  
Battery replacement  
Important:  
If 7 flashes even after the handset  
batteries have been charged for 7 hours, the  
batteries must be replaced.  
L Confirm that the AC adaptor is connected.  
L Ensure that w is not flashing.  
1 Press {j/OK}.  
Important:  
2 Select Handset Setup, then press  
L We recommend the use of Panasonic  
rechargeable batteries noted on page 5. If  
you installnon-rechargeable batteries and  
{>}.  
3 Select Time Settings, then press  
{>}.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
4 Select Set Date & Time, then press  
{>}.  
5 Enter the current day, month and year by  
selecting 2 digits for each.  
Example: 17 May, 2005  
Press {1}{7} {0}{5} {0}{5}.  
6 Enter the current hour and minute by  
selecting 2 digits for each.  
L You can select AM, PMor 24-hour  
time entry by pressing {*} repeatedly.  
Example: 3:30 PM  
Press {0}{3} {3}{0}, then press {*}  
repeatedly until 03:30 PMis  
displayed.  
7 Press {j/OK}.  
8 Press {ih}.  
Note:  
L To correct a digit, press {<} or {>} to  
move the cursor, then make the  
correction.  
L The date and time may be incorrect after a  
power failure. In this case, set the date  
and time again.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making/Answering Calls  
To redial the last number dialled  
Making calls using the  
handset  
Press {R}, then press {C} or {s}.  
L If {s} is pressed, the unit will redial  
automatically if the other party’s line is  
engaged.  
1 Lift the handset and dial the phone  
number.  
Note:  
L To correct a digit, press {C/T}, then  
enter the correct number.  
L You can also press {C} or {s} before  
pressing {R}.  
2 Press {C}.  
To make a call using the redial list  
The last 10 phone numbers dialled are  
stored in the redial list.  
3 When finished talking, press {ih} or  
place the handset on the base unit.  
1 Press {R}.  
Speakerphone  
L The last number dialled will be  
displayed.  
The handset features a digital  
speakerphone, which allows you to have  
hands-free conversations.  
2 Press {e} or {v} repeatedly to select  
the desired number.  
1 During a conversation, press {s} to turn  
on the speakerphone.  
L To exit the list, press {ih}.  
L Speak alternately with the caller.  
3 Press {C} or {s}.  
2 When finished talking, press {ih} or  
place the handset on the base unit.  
L If {s} is pressed, the unit will redial  
automatically if the other party’s line is  
engaged.  
Note:  
L For best performance, please note the  
following:  
To redial automatically  
If you press {s} when redialling and the  
other party’s line is engaged, the unit will  
redial the phone number again  
– Use the speakerphone in a quiet  
environment.  
– If you or the other party have difficulty  
hearing each other, press {e} or {v}  
repeatedly to adjust the speaker volume  
as necessary.  
automatically. The unit will redial up to 9  
times. While the handset is waiting to redial,  
{s} will flash. While the handset is  
redialling, mute is automatically turned on.  
L To switch back to the receiver, press  
{C}.  
Note:  
L Automatic redial is cancelled when any  
button (except {R}) is pressed.  
L If mute does not turn off after the line is  
connected, press {C/T}.  
To adjust the receiver or speaker volume  
Press {e} or {v} while talking. 4 volume  
levels are available for the receiver. 6 levels  
are available for the speaker.  
To edit a number in the redial list before  
calling it  
Redial feature  
Previously dialled phone numbers (each 24  
digits max.) can be redialled.  
1 Press {R}.  
2 Press {e} or {v} repeatedly to select  
the desired number, then press  
{j/OK}.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making/Answering Calls  
3 Select Edit and Call, then press  
Other features  
{>}.  
4 Press {<} or {>} to move the cursor,  
then edit the number.  
Voice enhancer  
You can change the tone quality of the  
receiver while you are on a call. 3 settings  
are available.  
L Place the cursor on the number you  
wish to erase, then press {C/T}.  
L Place the cursor to the right of where  
you want to insert a number, then  
press the appropriate dial key.  
1 Press {j/OK} during a call.  
2 Select Voice Enhancer, then press  
{>}.  
5 Press {C} or {s}.  
3 Select the desired setting, then press  
{>}.  
To erase numbers in the redial list  
Note:  
1 Press {R}.  
L If you select High Toneor Low  
Tone, [VE]is displayed.  
2 Press {e} or {v} repeatedly to select  
the desired number, then press  
{j/OK}.  
Mute  
3 Select Erase, then press {>}.  
You can mute your voice during a  
conversation. While mute is turned on, you  
will be able to hear the other party, but the  
other party will not be able to hear you.  
L If you want to erase all numbers in the  
list, select Erase All, then press  
{>}.  
4 Select Yes, then press {>}.  
1 To mute your voice, press {C/T}.  
5 Press {ih}.  
2 To return to the conversation, press  
{C/T} again.  
To store a number from the redial list into  
the handset phonebook  
Key lock  
The handset can be locked so that no calls  
or settings can be made. Incoming calls can  
be answered, but all other functions are  
disabled while key lock is on.  
To turn key lock on, press {j/OK} for about  
2 seconds.  
1 Press {R}.  
2 Press {e} or {v} repeatedly to select  
the desired number, then press  
{j/OK}.  
3 Select Add Phonebook, then press  
{>}.  
L [X]is displayed.  
L To turn key lock off, press {j/OK} for  
about 2 seconds.  
4 Enter a name (16 characters max.; see  
page 52 for character entry), then press  
{j/OK}.  
Note:  
5 Edit the phone number if necessary,  
L Calls to emergency numbers (page 32)  
cannot be made until key lock is turned  
off.  
then press {j/OK}.  
6 Select the desired category (page 18),  
L Key lock is turned off when the handset is  
turned off.  
then press {>}.  
7 Select Save, then press {>}.  
8 Press {ih}.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making/Answering Calls  
Important:  
R button (to use the recall feature)  
{R} is used to access optional telephone  
services. Contact your service provider for  
details.  
L Before recording a conversation, you  
should inform the other party that the  
conversation will be recorded.  
1 Press {j/OK} during a conversation.  
Note:  
2 Select Record Call, then press  
L If your unit is connected to a PBX (private  
branch exchange), pressing {R} can allow  
you to access certain features of your host  
PBX such as transferring an extension  
call. Consult your PBX dealer for details.  
{>}.  
L A beep is heard and recording starts.  
L A beep sounds every 15 seconds and  
can be heard by the other party, but is  
not recorded.  
L You can change the recall time (page 32).  
3 To stop recording, press {j/OK}.  
Call waiting  
Note:  
Call waiting is a service offered by your  
service provider whereby a second caller  
can be answered while online with the first  
caller. To answer the second caller, press  
{R}. To return to the first caller, press {R}  
again. Please consult your service provider  
for details of this service.  
L Recorded conversations are treated as  
new messages.  
L To listen to the recorded conversation, see  
page 40.  
L If message memory becomes full,  
Memory Fullis displayed and  
recording stops. Erase unnecessary  
messages (page 40).  
Pause button (for PBX/long distance  
service users)  
L While recording a conversation, you  
cannot change the tone quality of the  
handset.  
A pause is sometimes required when  
making calls using a PBX or long distance  
service.  
L All persons using this device for recording  
telephone conversations shall comply  
with New Zealand law. This requires that  
at least one party to the conversation is to  
be aware that it is being recorded. In  
addition, the principles enumerated in the  
Privacy Act 1993 shall be complied with in  
respect to the nature of the personal  
information collected, the purpose for its  
collection, how it is used and what is  
disclosed to any other party.  
Example: If you have to dial {0} before  
dialling outside numbers manually, you will  
probably pause after dialling {0} until you  
hear a dial tone.  
1 Press {0}.  
2 Press {R}.  
3 Dial the phone number, then press {C}  
or {s}.  
Note:  
L Pressing {R} 1 time creates 1 pause.  
Press {R} repeatedly to create longer  
pauses. To change pause length, see  
page 32.  
Making calls using the  
base unit  
Recording a telephone conversation  
using the handset  
1 Press {s}.  
You can record your conversation while on  
an outside call.  
2 Dial the phone number.  
L Speak alternately with the caller.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making/Answering Calls  
3 When finished talking, press {s}.  
2 To return to the conversation, press {T}  
again.  
Note:  
L For best performance, please note the  
following:  
R button (to use the recall feature)  
{R} is used to access optional telephone  
services. Contact your service provider for  
details.  
– Use the speakerphone in a quiet  
environment.  
– If you or the other party have difficulty  
hearing each other, press {>} or {<}  
repeatedly to adjust the speaker volume  
as necessary.  
Note:  
L If your unit is connected to a PBX (private  
branch exchange), pressing {R} can allow  
you to access certain features of your host  
PBX such as transferring an extension  
call. Consult your PBX dealer for details.  
L While on a call, you can switch from the  
speakerphone to the handset:  
– If the handset is on the base unit, just lift  
it up.  
L You can change the recall time (page 32).  
Call waiting  
To adjust the speaker volume  
Press {>} or {<} while talking. 8 volume  
levels are available.  
Call waiting is a service offered by your  
service provider whereby a second caller  
can be answered while online with the first  
caller. To answer the second caller, press  
{R}. To return to the first caller, press {R}  
again. Please consult your service provider  
for details of this service.  
To redial the last number dialled  
Press {s}, then press {R}.  
L If the other party’s line is engaged, the unit  
will redial up to 9 times automatically.  
While the base unit is waiting to redial, the  
speakerphone indicator will flash. While  
the base unit is redialling, mute is  
automatically turned on.  
Pause button (for PBX/long distance  
service users)  
A pause is sometimes required when  
making calls using a PBX or long distance  
service.  
Note:  
Example: If you have to dial {0} before  
dialling outside numbers manually, you will  
probably pause after dialling {0} until you  
hear a dial tone.  
L Automatic redial is cancelled when any  
dialling button (except {R}) is  
pressed.  
L If mute does not turn off after the line is  
connected, press {T}.  
1 Press {s}.  
2 Press {0}.  
3 Press {R}.  
4 Dial the phone number.  
Note:  
Other features  
Mute  
You can mute your voice during a  
conversation. While mute is turned on, you  
will be able to hear the other party, but the  
other party will not be able to hear you.  
L Pressing {R} 1 time creates 1 pause.  
Press {R} repeatedly to create longer  
pauses. To change pause length, see  
page 32.  
1 To mute your voice, press {T}.  
L The speakerphone indicator flashes.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making/Answering Calls  
Note:  
L When the ringer volume is turned off, U is  
displayed on the base unit.  
Answering calls using the  
handset  
L When the ringer volume is turned off, the  
base unit will not ring for outside calls and  
it will ring at the low level for intercom  
calls.  
1 Lift the handset and press {C} or {s}  
when the unit rings.  
L You can also answer a call by pressing  
any dial key from {0} to {9}, {*}, {#},  
or {INT}. (Any key answer feature)  
L When the message alert feature is on  
(page 44), the base unit will beep even if  
the ringer volume is turned off.  
2 When finished talking, press {ih} or  
place the handset on the base unit.  
To change ringtones  
You can change the ringtone used by the  
base unit.  
Auto talk feature  
You can answer calls simply by lifting the  
handset off the base unit. You do not need to  
press {C}. To turn this feature on, see  
page 28.  
1 Press {>} or {<} when the base unit is  
in standby mode.  
2 Press {<} or {>} repeatedly to  
select the desired ringtone, then press  
{5}.  
To adjust the ringer volume when an  
outside call comes in  
Press {e} or {v} when an outside call  
comes in.  
Note:  
L The ringer volume cannot be adjusted if  
the handset is on the base unit.  
Answering calls using the  
base unit  
1 Press {s}.  
2 When finished talking, press {s}.  
To adjust the ringer volume  
Press {>} or {<} when a call is received or  
when the base unit is in standby mode. 4  
volume levels (high/medium/low/off) are  
available. To turn the ringer volume off,  
press and hold {<} until the base unit  
beeps. To turn the ringer volume on again,  
press {>}.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phonebooks  
Categories  
Handset phonebook  
Categories can help you find entries in the  
handset phonebook quickly and easily.  
When adding an entry to the handset  
phonebook you can assign it to the desired  
category. You can change the names of  
categories assigned for handset phonebook  
entries (“Friends”, “Family”, etc.) and then  
search for handset phonebook entries by  
category. Additional category features are  
available for Caller ID subscribers (page  
35).  
The handset phonebook allows you to make  
calls without having to dial manually. You  
can add 200 names and phone numbers to  
the handset phonebook, assign each  
handset phonebook entry to the desired  
category, and search for handset  
phonebook entries by name or category.  
Adding entries to the handset  
phonebook  
Changing category names  
1 Press {k}, then press {j/OK}.  
1 Press {k}, then press {j/OK}.  
2 Select Category, then press {>}.  
2 Select New Entry, then press {>}.  
3 Enter the party’s name (16 characters  
max.; see page 52 for character entry),  
then press {j/OK}.  
3 Select the category you want to change  
the name of, then press {>}.  
4 Select Category Name, then press  
4 Enter the party’s phone number (24  
{>}.  
digits max.), then press {j/OK}.  
5 Edit the name (10 characters max.; see  
page 52 for character entry), then press  
{j/OK}.  
5 Select the desired category for the entry,  
then press {>}.  
6 Select Save, then press {>}.  
7 Press {ih}.  
6 Press {ih}.  
Note:  
Finding and calling a handset  
phonebook entry  
Handset phonebook entries can be  
searched for by first character, by category,  
or by scrolling through all handset  
phonebook entries.  
L If there is no space to store new entries,  
Memory Fullwill be displayed. Erase  
unnecessary entries (page 19).  
To edit/correct a mistake  
Press {<} or {>} to place the cursor on the  
number or character you wish to erase, then  
press {C/T}. Place the cursor to the right of  
where you want to insert a number or  
character, then press the appropriate dial  
key.  
Once you have found the desired entry,  
press {C} or {s} to dial the phone number.  
Scrolling through all entries  
1 Press {k}.  
Note:  
2 Press {e} or {v} repeatedly to display  
the desired entry.  
L Press and hold {C/T} to erase all  
numbers or characters.  
Searching by first character (index  
search)  
1 Press {k}, then press {R}.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phonebooks  
2 Select Index Search, then press  
2 Select Edit, then press {>}.  
{>}.  
3 Edit the name if necessary (16  
characters max.; see page 52 for  
character entry), then press {j/OK}.  
3 Select the character entry mode that  
contains the character you are  
searching for, and press {>}.  
4 Edit the phone number if necessary (24  
4 Press the dial key ({0} to {9}) which  
contains the character you are  
searching for (page 52).  
digits max.), then press {j/OK}.  
5 Select the desired category, then press  
{>}.  
L Press the same dial key repeatedly to  
display the first entry corresponding to  
each letter located on that dial key.  
6 Select Save, then press {>}.  
7 Press {ih}.  
L If there is no entry corresponding to  
the letter you selected, the next entry  
will be displayed.  
Erasing entries from the handset  
phonebook  
5 Press {e} or {v} repeatedly to scroll  
through the handset phonebook if  
necessary.  
Erasing an entry  
1 Find the desired entry (page 18), then  
press {j/OK}.  
Searching by category  
2 Select Erase, then press {>}.  
3 Select Yes, then press {>}.  
4 Press {ih}.  
1 Press {k}, then press {R}.  
2 Select Category Search, then  
press {>}.  
3 Select the category you want to search,  
Erasing all entries  
then press {>}.  
1 Press {k}, then press {j/OK}.  
2 Select Erase All, then press {>}.  
3 Select Yes, then press {>}.  
4 Select Yesagain, then press {>}.  
5 Press {ih}.  
L The first entry in that category is  
displayed.  
L If you select All, the unit will end  
the category search.  
4 Press {e} or {v} repeatedly to scroll  
through the handset phonebook if  
necessary.  
One touch dial  
Editing entries in the handset  
phonebook  
Handset phonebook entries can be edited  
after you have saved them. You can change  
the name, phone number, and category.  
Assigning an entry in the handset  
phonebook to a one touch dial key  
Dial keys {1} to {9} can each be used as a  
one touch dial key, allowing you to dial a  
number from the handset phonebook by  
simply pressing a dial key.  
Changing a name, phone number,  
category  
1 Find the desired entry (page 18), then  
press {j/OK}.  
1 Find the desired entry (page 18), then  
2 Select One Touch Dial, then press  
press {j/OK}.  
{>}.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phonebooks  
3 Press {e} or {v} to select the desired  
L To search by first character (index  
search), see page 18. To search by  
category, see page 19.  
dial key number, then press {>}.  
L When the dial key is already used as a  
one touch dial key, @is displayed  
next to the dial key number. If you  
select this dial key, Overwriteis  
displayed. You can overwrite the  
previous assignment if necessary.  
3 Press {>} to dial the number.  
L If you do not wish to overwrite, select  
Go Back.  
4 Select Save, then press {>}.  
5 Press {ih}.  
Making a call using a one touch dial key  
1 Press and hold the desired one touch  
dial key ({1} to {9}).  
L You can view other one touch dial  
assignments by pressing {e} or {v}.  
2 Press {C} or {s}.  
Erasing a one touch dial assignment  
1 Press and hold the desired one touch  
dial key ({1} to {9}).  
2 Press {j/OK}, then press {>}.  
3 Select Yes, then press {>}.  
Note:  
L Only the one touch dial assignment is  
erased. The corresponding handset  
phonebook entry is not erased.  
Chain dial  
This feature allows you to dial phone  
numbers in the handset phonebook while  
you are on a call. This feature can be used,  
for example, to dial a calling card access  
number or bank account PIN that you have  
stored in the handset phonebook, without  
having to dial manually.  
1 While on a call, press {k}.  
2 Press {e} or {v} repeatedly to select  
the desired entry.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phonebooks  
L The recording is played back.  
9 Select Save, then press {>}.  
10 Press {ih}.  
Shared phonebook  
The shared phonebook allows you to make  
calls without having to dial manually. Any  
handset registered to the same base unit  
can use the shared phonebook. You can  
add 20 names and phone numbers to the  
shared phonebook and search for shared  
phonebook entries by name. If you  
subscribe to Caller ID service, you can use  
the shared phonebook’s audible call feature  
(page 36).  
Note:  
L If Erroris displayed, record the  
audible call announcement again.  
L If there is no space to store new entries,  
Memory Fullwill be displayed. Erase  
unnecessary entries (page 22).  
To edit/correct a mistake  
Press {<} or {>} to place the cursor on the  
number or character you wish to erase, then  
press {C/T}. Place the cursor to the right of  
where you want to insert a number or  
character, then press the appropriate dial  
key.  
Adding entries to the shared  
phonebook  
1 Press {k} 2 times.  
Note:  
2 Press {j/OK}.  
L Press and hold {C/T} to erase all  
numbers or characters.  
3 Select New Entry, then press {>}.  
4 Enter the party’s name (16 characters  
max.; see page 52 for character entry),  
then press {j/OK}.  
Finding and calling a shared  
phonebook entry  
5 Enter the party’s phone number (24  
Shared phonebook entries can be searched  
for by first character or by scrolling through  
all shared phonebook entries.  
digits max.), then press {j/OK}.  
6 To record an audible call announcement,  
select Start Recording, then  
press {>}, otherwise select Skip  
Recording, press {>}, then go to  
step 9.  
Once you have found the desired entry,  
press {C} or {s} to dial the phone number.  
Scrolling through all entries  
L Audible call (page 36) is useful for  
Caller ID subscribers only.  
1 Press {k} 2 times.  
L If Memory Fullis displayed, erase  
any unnecessary answering system  
messages (page 40).  
2 Press {e} or {v} repeatedly to display  
the desired entry.  
Searching by first character (index  
search)  
7 When Recordingis displayed, speak  
into the microphone.  
L Maximum recording time is 10  
seconds.  
1 Press {k} 2 times.  
2 Press {R}.  
L Hold the handset about 20 cm away  
and speak clearly into the microphone.  
3 Select the character entry mode that  
contains the character you are  
searching for, and press {>}.  
8 To end recording, select Stop, then  
press {>}.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phonebooks  
4 Press the dial key ({0} to {9}) which  
contains the character you are  
searching for (page 52).  
Playing back an audible call  
announcement  
1 Find the desired entry (page 21), then  
L Press the same dial key repeatedly to  
display the first entry corresponding to  
each letter located on that dial key.  
press {j/OK}.  
2 Select Audible Call, then press  
L If there is no entry corresponding to  
the letter you selected, the next entry  
will be displayed.  
{>}.  
L The audible call announcement is  
played back.  
5 Press {e} or {v} repeatedly to scroll  
through the shared phonebook if  
necessary.  
3 Press {ih}.  
Erasing entries from the shared  
phonebook  
Editing entries in the shared  
phonebook  
Erasing an entry  
Shared phonebook entries can be edited  
after you have saved them. You can change  
the name, phone number, and audible call.  
1 Find the desired entry (page 21), then  
press {j/OK}.  
2 Select Erase, then press {>}.  
3 Select Yes, then press {>}.  
4 Press {ih}.  
Changing a name, phone number,  
audible call  
1 Find the desired entry (page 21), then  
press {j/OK}.  
Erasing all entries  
2 Select Edit, then press {>}.  
1 Press {k} 2 times.  
3 Edit the name if necessary (16  
characters max.; see page 52 for  
character entry), then press {j/OK}.  
2 Press {j/OK}.  
3 Select Erase All, then press {>}.  
4 Select Yes, then press {>}.  
5 Select Yesagain, then press {>}.  
6 Press {ih}.  
4 Edit the phone number if necessary (24  
digits max.), then press {j/OK}.  
5 Skip, record, or erase an audible call  
recording.  
L To record the audible call  
announcement, continue from step 6,  
“Adding entries to the shared  
phonebook”, page 21.  
L To skip recording, select Skip  
Recordingand press {>}.  
L To erase the audible call  
announcement, select Eraseand  
press {>}.  
6 Select Save, then press {>}.  
7 Press {ih}.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phonebooks  
Copying handset phonebook  
Copying phonebook  
entries  
entries to the shared phonebook  
1 Find the desired handset phonebook  
entry (page 18), then press {j/OK}.  
Copying handset phonebook  
entries to other handset  
2 Select Copy, then press {>}.  
3 Press {0}.  
Handset phonebook entries (page 18) can  
be copied from the handset to the  
phonebook of a compatible Panasonic  
handset.  
4 To continue copying another entry,  
select Yes, then press {>}. Find the  
desired entry, then press {>}.  
L To finish copying, select No, then  
press {>}.  
Copying one entry  
5 Press {ih}.  
1 Find the desired handset phonebook  
entry (page 18), then press {j/OK}.  
2 Select Copy, then press {>}.  
3 Enter the handset number you wish to  
send the handset phonebook entry to.  
4 To continue copying another entry,  
select Yes, then press {>}. Find the  
desired handset phonebook entry, then  
press {>}.  
L To finish copying, select No, then  
press {>}.  
5 Press {ih}.  
Copying all entries  
1 Press {k}, then press {j/OK}.  
2 Select Copy All, then press {>}.  
3 Enter the handset number you wish to  
send the handset phonebook entries to.  
L When all entries have been copied,  
Completedis displayed.  
4 Press {ih}.  
Note:  
L If the other handset (the receiver) is not in  
standby mode, Failedis displayed on  
your handset (the sender).  
L If there was an error while copying  
phonebook entries, Incompleteis  
displayed on your handset (the sender).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handset Settings  
Guide to handset settings  
For your reference, a chart of all items which can be customised for the handset is printed  
below.  
L When customising the handset, the current item or setting is indicated by >.  
Handset settings Sub-menu  
menu  
Sub-menu 2  
Default setting  
Page  
Time Settings Set Date & Time  
Alarm  
Off  
page 11  
page 25  
page 25  
page 25  
page 25  
page 26  
page 26  
page 26  
page 27  
Ringer Setup  
Ringer Volume  
Ext. Ringtone  
Int. Ringtone  
Night Mode Start/End  
On/Off  
Maximum  
Ringtone 1  
Ringtone 1  
23:00/06:00  
Off  
Ring Delay  
60 sec.  
Select  
Category  
Display Setup Standby Display  
Select Language  
Off  
page 27  
page 27  
page 27  
page 28  
page 28  
page 47  
page 47  
page 28  
page 28  
page 29  
English  
Level 3  
Off  
Contrast  
Call Options  
Call Bar  
Auto Talk  
Register H.set  
Off  
Registration  
Select Base  
Auto  
0000  
On  
Other Options Handset PIN  
Keytones  
Reset Handset  
Note:  
L Up to 3 menu items can be displayed at a time. To select a menu item not shown on the  
current page, scroll up or down by pressing the navigator key, {e} or {v}, respectively.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handset Settings  
Time settings  
Ringer setup  
Alarm  
Ringer volume  
An alarm will sound for 3 minutes at the set  
time once or daily. Set the date and time  
beforehand (page 11).  
1 Press {j/OK}.  
2 Select Handset Setup, then press  
{>}.  
1 Press {j/OK}.  
3 Select Ringer Setup, then press  
2 Select Handset Setup, then press  
{>}.  
{>}.  
4 Select Ringer Volume, then press  
3 Select Time Settings, then press  
{>}.  
{>}.  
5 Press {e} or {v} repeatedly to select  
the desired volume.  
4 Select Alarm, then press {>} 2  
times.  
6 Press {>}.  
7 Press {ih}.  
Note:  
5 Select an alarm mode, then press {>}.  
Once: The alarm will sound once at  
the set time. Enter the desired day and  
month by selecting 2 digits for each.  
L Alarms will sound and the handset will ring  
for intercom calls and when paged even if  
the ringer is turned off.  
Daily: An alarm will sound daily at  
the set time.  
Off: Turns the alarm off. Press {>}  
again, then press {ih} to finish.  
Changing ringtones  
You can change the ringtone used by the  
handset.  
6 Enter the desired hour and minute by  
selecting 2 digits for each.  
Ext. Ringtone: Selects the ringtone for  
outside calls.  
L You can select AM, PMor 24-hour  
time entry by pressing {*} repeatedly.  
Int. Ringtone: Selects the ringtone for  
intercom calls.  
7 Press {j/OK}.  
8 Select the ringtone that will sound at the  
1 Press {j/OK}.  
set time, then press {>}.  
2 Select Handset Setup, then press  
9 Select Save, then press {>}.  
{>}.  
10 Press {ih}.  
3 Select Ringer Setup, then press  
Note:  
{>}.  
L To stop the alarm, press any dial key.  
4 Select the desired item, then press {>}.  
L When in talk or intercom mode, the alarm  
will not sound until the call has ended.  
5 Select the desired ringtone, then press  
{>}.  
L The alarm will sound at the set time even  
when the ringer volume is turned off.  
6 Press {ih}.  
Note:  
L If you select Once, the setting will  
change to Offafter the alarm sounds.  
L If you select one of the melody ringtones,  
the ringtone will continue to sound for  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handset Settings  
several seconds if the caller hangs up  
before you answer. You may hear a dial  
tone or no one on the line when you  
answer a call.  
L If you use 12-hour time entry, select  
AMor PMby pressing {*}  
repeatedly before entering the time.  
7 Enter the desired hour and minute you  
wish to end this feature by selecting 2  
digits for each.  
L The preset melodies in this product are  
used with permission of © 2004 M-ZoNE  
Co., Ltd.  
L If you use 12-hour time entry, select  
AMor PMby pressing {*}  
repeatedly before entering the time.  
8 Press {j/OK}.  
Night mode  
9 Press {ih}.  
Night mode allows you to select a block of  
time during which the handset will not ring  
for outside calls. This feature is useful for  
times when you do not want to be disturbed,  
for example, while sleeping. Night mode can  
be set independently for the handset and the  
base unit (page 31).  
Turning night mode on/off  
1 Press {j/OK}.  
2 Select Handset Setup, then press  
{>}.  
3 Select Ringer Setup, then press  
Using the handset phonebook’s category  
feature (page 18), you can also select  
categories of callers whose calls will  
override night mode and ring the handset  
(Caller ID subscribers only).  
{>}.  
4 Select Night Mode, then press {>}.  
5 Select On/Off, then press {>}.  
6 Select Onor Off, then press {>}.  
7 Press {ih}.  
Set the date and time beforehand (page 11).  
Note:  
L To avoid disturbances, we recommend  
turning the call screening feature off (page  
44) in addition to turning the night mode  
feature on.  
Note:  
L When the night mode is turned on, [N]”  
is displayed.  
Setting the ring delay for night mode  
This setting allows the handset to ring during  
night mode if the caller waits long enough.  
After the selected amount of time passes,  
the handset will ring. If you select No  
Ringing, the handset will not ring during  
night mode.  
Setting the start and end time for night  
mode  
1 Press {j/OK}.  
2 Select Handset Setup, then press  
{>}.  
3 Select Ringer Setup, then press  
1 Press {j/OK}.  
{>}.  
2 Select Handset Setup, then press  
4 Select Night Mode, then press {>}.  
{>}.  
5 Select Start/End, then press {>}.  
3 Select Ringer Setup, then press  
{>}.  
6 Enter the desired hour and minute you  
wish to start this feature by selecting 2  
digits for each.  
4 Select Night Mode, then press {>}.  
5 Select Ring Delay, then press {>}.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handset Settings  
6 Select the desired setting, then press  
1 Press {j/OK}.  
{>}.  
2 Select Handset Setup, then press  
7 Press {ih}.  
{>}.  
Note:  
3 Select Display Setup, then press  
{>}.  
L When the answering system answers the  
call, this feature does not work.  
4 Select Standby Display, then  
press {>}.  
Selecting categories to bypass night  
mode  
5 Select the desired setting, then press  
{>}.  
1 Press {j/OK}.  
6 Press {ih}.  
2 Select Handset Setup, then press  
Note:  
{>}.  
L If Base Numberis selected and the  
current base unit number is 2, -2-is  
displayed.  
3 Select Ringer Setup, then press  
{>}.  
4 Select Night Mode, then press {>}.  
L If Handset Numberis selected and the  
current handset number is 2, [2]is  
displayed.  
5 Select Select Category, then  
press {>}.  
6 Press the desired category numbers,  
Changing the display language  
then press {j/OK}.  
L The selected category number will  
flash.  
1 Press {j/OK}.  
2 Select Handset Setup, then press  
L To cancel a selected category  
number, press the number again. The  
number will stop flashing.  
{>}.  
3 Select Display Setup, then press  
{>}.  
7 Press {ih}.  
4 Select Select Language, then  
Note:  
press {>}.  
L If a call is received from one of the  
categories set to bypass night mode, the  
handset will ring.  
5 Select the desired language, then press  
{>}.  
6 Press {ih}.  
Note:  
L If you select a language you cannot read,  
press {ih}, {j/OK}, press {e} 2  
times, press {>}, press {v} 2 times,  
press {>}, press {v}, press {>}, select  
the desired language, then press {>}.  
Press {ih}.  
Display setup  
Selecting the standby mode  
display  
Base Number: The current base unit  
number is displayed.  
Changing the display contrast  
Handset Number: The current handset  
number is displayed.  
1 Press {j/OK}.  
Off: Only the current date and time are  
displayed.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handset Settings  
2 Select Handset Setup, then press  
2 Select Handset Setup, then press  
{>}.  
{>}.  
3 Select Display Setup, then press  
3 Select Call Options, then press  
{>}.  
{>}.  
4 Select Contrast, then press {>}.  
4 Select Auto Talk, then press {>}.  
5 Select Onor Off, then press {>}.  
6 Press {ih}.  
5 Press {e} or {v} repeatedly to select  
the desired contrast, then press {>}.  
6 Press {ih}.  
Other options  
Call options  
Changing the handset PIN  
Turning call bar on/off  
(Personal Identification Number)  
This feature prohibits making outside calls  
with the handset. When call bar is turned on,  
only intercom calls and calls to emergency  
numbers (page 32) can be made. Call bar  
can be set independently for the handset  
and the base unit (page 33).  
For security, the handset PIN must be  
entered when changing certain settings. The  
default PIN is 0000.  
Important:  
L If you change the PIN, please make note  
of your new PIN. The unit will not reveal  
the PIN to you. If you forget your PIN,  
consult your nearest Panasonic service  
centre.  
1 Press {j/OK}.  
2 Select Handset Setup, then press  
{>}.  
1 Press {j/OK}.  
3 Select Call Options, then press  
{>}.  
2 Select Handset Setup, then press  
{>}.  
4 Select Call Bar, then press {>}.  
3 Select Other Options, then press  
5 Enter 0000(default handset PIN).  
{>}.  
L If you changed the PIN, enter it (page  
28).  
4 Select Handset PIN, then press  
{>}.  
6 Select Onor Off, then press {>}.  
5 Enter the current 4-digit handset PIN.  
7 Press {ih}.  
6 Enter the new 4-digit handset PIN, then  
Note:  
press {j/OK}.  
L When call bar is turned on, o is  
displayed.  
7 Press {ih}.  
Turning keytones on/off  
Turning auto talk on/off  
Keytones are tones heard when keys are  
pressed. Includes confirmation tones and  
error tones.  
When this feature is turned on, you can  
answer calls simply by lifting the handset off  
the base unit. You do not need to press  
{C}.  
1 Press {j/OK}.  
1 Press {j/OK}.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handset Settings  
2 Select Handset Setup, then press  
{>}.  
3 Select Other Options, then press  
{>}.  
4 Select Keytones, then press {>}.  
5 Select Onor Off, then press {>}.  
6 Press {ih}.  
Note:  
L If keytones are turned off, error tones will  
not sound when you enter the wrong PIN  
or when memory is full.  
Resetting the handset to its  
default settings  
1 Press {j/OK}.  
2 Select Handset Setup, then press  
{>}.  
3 Select Other Options, then press  
{>}.  
4 Select Reset Handset, then press  
{>}.  
5 Enter 0000(default handset PIN).  
L If you changed the PIN, enter it (page  
28).  
6 Select Yes, then press {>}.  
7 Press {ih}.  
Note:  
L The following items will be deleted or reset  
to their default settings:  
– Settings listed on page 24  
– Redial list  
– Voice enhancer  
– Category names  
– Category ringtones  
L The following items will be retained:  
– Handset phonebook entries (Category  
names and ringtones will be reset to  
their default settings.)  
– Date and time  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Base Unit Settings  
Guide to base unit settings  
For your reference, a chart of all items which can be customised for the base unit is printed  
below.  
L These items are customised using the handset.  
L When customising the base unit, the current item or setting is indicated by >.  
Base unit  
settings menu  
Sub-menu  
Sub-menu 2  
Default setting  
Page  
Ringer Setup  
Night Mode  
Start/End  
On/Off  
23:00/06:00  
page 31  
page 31  
page 31  
page 32  
page 32  
page 32  
page 32  
page 33  
page 33  
page 34  
page 48  
page 34  
Off  
Ring Delay 60 sec.  
600 msec.  
Call Options  
Recall  
Pause Length  
Emergency No.  
3 sec.  
111, 911, 999  
ARS Settings Area Code  
Call Restrict  
Call Bar  
Off  
Other Options Base Unit PIN  
Repeater Mode  
0000  
Off  
Reset Base  
Note:  
L Up to 3 menu items can be displayed at a time. To select a menu item not shown on the  
current page, scroll up or down by pressing the navigator key, {e} or {v}, respectively.  
L To change the base unit ringer volume and the base unit ringtone, see page 17.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Base Unit Settings  
9 Press {j/OK}.  
10 Press {ih}.  
Ringer setup  
Turning night mode on/off  
Night mode  
1 Press {j/OK}.  
Night mode allows you to select a block of  
time during which the base unit will not ring  
for outside calls. This feature is useful for  
times when you do not want to be disturbed,  
for example, while sleeping. Night mode can  
be set independently for the handset (page  
26) and the base unit.  
2 Select Base Unit Setup, then  
press {>}.  
3 Enter 0000(default base unit PIN).  
L If you changed the PIN, enter it (page  
34).  
4 Select Ringer Setup, then press  
Set the date and time beforehand (page 11).  
{>}.  
Note:  
5 Select Night Mode, then press {>}.  
6 Select On/Off, then press {>}.  
7 Select Onor Off, then press {>}.  
8 Press {ih}.  
L To avoid disturbances, we recommend  
turning the call screening feature off (page  
44) in addition to turning the night mode  
feature on.  
Setting the start and end time for night  
mode  
Setting the ring delay for night mode  
This setting allows the base unit to ring  
during night mode if the caller waits long  
enough. After the selected amount of time  
passes, the base unit will ring. If you select  
No Ringing, the base unit will not ring  
during night mode.  
1 Press {j/OK}.  
2 Select Base Unit Setup, then  
press {>}.  
3 Enter 0000(default base unit PIN).  
L If you changed the PIN, enter it (page  
34).  
1 Press {j/OK}.  
2 Select Base Unit Setup, then  
4 Select Ringer Setup, then press  
press {>}.  
{>}.  
3 Enter 0000(default base unit PIN).  
5 Select Night Mode, then press {>}.  
L If you changed the PIN, enter it (page  
34).  
6 Select Start/End, then press {>}.  
7 Enter the desired hour and minute you  
wish to start this feature by selecting 2  
digits for each.  
4 Select Ringer Setup, then press  
{>}.  
5 Select Night Mode, then press {>}.  
L If you use 12-hour time entry, select  
AMor PMby pressing {*}  
repeatedly before entering the time.  
6 Select Ring Delay, then press {>}.  
7 Select the desired setting, then press  
{>}.  
8 Enter the desired hour and minute you  
wish to end this feature by selecting 2  
digits for each.  
8 Press {ih}.  
Note:  
L If you use 12-hour time entry, select  
AMor PMby pressing {*}  
repeatedly before entering the time.  
L When the answering system answers the  
call, this feature does not work.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Base Unit Settings  
Storing/changing emergency  
numbers  
Call options  
These settings determine which phone  
numbers can be dialled while the call bar  
feature is on (page 28).  
Changing the recall time  
Change the recall time, if necessary,  
depending on the requirements of your  
service provider or PBX.  
1 Press {j/OK}.  
2 Select Base Unit Setup, then  
1 Press {j/OK}.  
press {>}.  
2 Select Base Unit Setup, then  
3 Enter 0000(default base unit PIN).  
press {>}.  
L If you changed the PIN, enter it (page  
34).  
3 Enter 0000(default base unit PIN).  
L If you changed the PIN, enter it (page  
34).  
4 Select Call Options, then press  
{>}.  
4 Select Call Options, then press  
5 Select Emergency No., then press  
{>}.  
{>}.  
5 Select Recall, then press {>}.  
6 Select a memory location, then press  
{>}.  
6 Select the desired setting, then press  
{>}.  
L If the memory location already  
contains an emergency number, the  
number is displayed.  
7 Press {ih}.  
7 Enter/edit the number, then press  
Setting pause length  
{j/OK}.  
Change the pause length, if necessary,  
depending on the requirements of your  
service provider or PBX.  
L To erase an emergency number, press  
and hold {C/T}.  
8 Press {ih}.  
1 Press {j/OK}.  
Note:  
2 Select Base Unit Setup, then  
L The default setting for emergency  
numbers are stored in the first 3 memory  
locations. It is recommended that you do  
not overwrite these numbers.  
press {>}.  
3 Enter 0000(default base unit PIN).  
L If you changed the PIN, enter it (page  
34).  
4 Select Call Options, then press  
Selecting area codes to be deleted  
automatically  
{>}.  
In some situations, phone numbers stored  
automatically in the Caller ID list (page 36)  
will include area codes. If you do not want to  
dial the area codes when making calls from  
the Caller ID list, you can store the area  
codes which you want the unit to delete  
automatically.  
5 Select Pause Length, then press  
{>}.  
6 Select the desired setting, then press  
{>}.  
7 Press {ih}.  
Example: You have stored the area code  
123. If you make a call from the Caller ID  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Base Unit Settings  
list to the phone number 123-456-7890,  
the unit dials 456-7890.  
2 Select Base Unit Setup, then  
press {>}.  
1 Press {j/OK}.  
3 Enter 0000(default base unit PIN).  
L If you changed the PIN, enter it (page  
34).  
2 Select Base Unit Setup, then  
press {>}.  
3 Enter 0000(default base unit PIN).  
4 Select Call Options, then press  
{>}.  
L If you changed the PIN, enter it (page  
34).  
5 Select Call Restrict, then press  
{>}.  
4 Select Call Options, then press  
{>}.  
L The base unit extension number 0”  
and the extension numbers of all  
registered handsets are displayed.  
5 Select ARS Settings, then press  
{>}.  
6 Select the extensions which will be  
restricted by pressing the desired  
number.  
6 Select Area Code, then press {>}.  
7 Select an area code location (1 to 4),  
then press {>}.  
L If the location already contains an  
area code, the code is displayed.  
L Flashing numbers indicate call  
restriction is turned on for the  
corresponding extension.  
8 Enter an area code (5 digits max.), then  
L To turn call restriction off for an  
extension, press the dial key  
press {j/OK}.  
9 Press {ih}.  
corresponding to its extension  
number. The number will stop flashing.  
Note:  
7 Press {j/OK}.  
L The use of this feature can prevent a  
National Call from being dialled. E.g., in  
the case of the South Island, the “03” will  
be omitted and will therefore prevent a  
National Call to other areas of the South  
Island.  
8 Select a memory location, then press  
{>}.  
L If the memory location already  
contains a restricted number, the  
number is displayed.  
9 Enter the phone number or area code to  
be restricted (8 digits max.), then press  
{j/OK}.  
Setting call restriction  
You can restrict the base unit or selected  
handsets from dialling certain numbers. Up  
to 6 phone numbers can be stored. Storing  
area codes here will prevent the restricted  
extensions (the base unit or selected  
handsets) from dialling any phone number in  
that area code.  
L To erase a restricted number, press  
{C/T}.  
10 Press {ih}.  
Turning call bar on/off  
Important:  
This feature prohibits making outside calls  
with the base unit. When call bar is turned  
on, only intercom calls and calls to  
L Call restriction can be set using handset 1  
only. (To confirm which handset is handset  
1, press {x} and {1} on the base unit.  
Handset 1 will ring.)  
emergency numbers (page 32) can be  
made. Call bar can be set independently for  
the handset (page 28) and the base unit.  
1 Press {j/OK}.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Base Unit Settings  
1 Press {j/OK}.  
Resetting the base unit to its  
default settings  
2 Select Base Unit Setup, then  
press {>}.  
1 Press {j/OK}.  
3 Enter 0000(default base unit PIN).  
L If you changed the PIN, enter it (page  
34).  
2 Select Base Unit Setup, then  
press {>}.  
4 Select Call Options, then press  
3 Enter 0000(default base unit PIN).  
{>}.  
L If you changed the PIN, enter it (page  
34).  
5 Select Call Bar, then press {>}.  
6 Select Onor Off, then press {>}.  
7 Press {ih}.  
4 Select Other Options, then press  
{>}.  
5 Select Reset Base, then press {>}.  
6 Select Yes, then press {>}.  
7 Press {ih}.  
Other options  
Note:  
L The following items will be deleted or reset  
to their default settings:  
Changing the base unit PIN  
(Personal Identification Number)  
For security, the base unit PIN must be  
entered when changing certain settings. The  
default PIN is 0000.  
– Settings listed on page 30, 43  
– Base unit ringtone  
– Base unit ringer volume (Medium)  
– Caller list  
Important:  
L The following items will be retained:  
– Date and time  
L If you change the PIN, please make note  
of your new PIN. The unit will not reveal  
the PIN to you. If you forget your PIN,  
consult your nearest Panasonic service  
centre.  
– Shared phonebook entries  
– Repeater mode  
– Recordings, including your greeting  
message, caller messages, voice  
memos, audible call announcements,  
and recorded conversations  
1 Press {j/OK}.  
2 Select Base Unit Setup, then  
press {>}.  
3 Enter 0000(default base unit PIN).  
L If you changed the PIN, enter it.  
4 Select Other Options, then press  
{>}.  
5 Select Base Unit PIN, then press  
{>}.  
6 Enter the new 4-digit base unit PIN, then  
press {j/OK}.  
7 Press {ih}.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID Service  
you can call back the caller without having  
to dial the phone number (page 41).  
Using Caller ID service  
L When caller information is received and it  
matches a phone number stored in the  
unit’s phonebook:  
Important:  
L This unit is Caller ID compatible. To use  
Caller ID features (such as displaying  
caller phone numbers), you must  
– The stored name will be displayed and  
logged in the caller list.  
– The handset will use the ringtone  
assigned to the caller’s category.  
subscribe to Caller ID service. Consult  
your service provider for details.  
– Both the base unit and handset will  
announce the audible call recording you  
made.  
For all local and national incoming calls,  
your display will show the area code (e.g. 09  
for Auckland) or the cellular prefix (e.g. 0274  
for Telecom Cellular) followed by the caller’s  
telephone number. An Auckland caller’s  
number will be displayed as 09XXXXXXX.  
The seven X’s represent the seven digits of  
the caller’s telephone number. A caller from  
a 6-digit Telecom Cellular number will be  
displayed as 0274XXXXXX. For incoming  
international calls, your display may only  
show 0000. For business users on a  
Centrex line, your display will show Centrex  
extension numbers in the shorter extension  
number format used within your company.  
L If the unit is connected to a PBX system,  
you may not receive the caller information.  
L When the caller dialled from an area  
which does not provide Caller ID service,  
Out of Areawill be displayed.  
L When the caller requested not to send  
caller information, either no information or  
Private Callerwill be displayed.  
Missed calls  
If a call is not answered, the unit treats the  
call as a missed call. The number of missed  
calls is shown on the display. This lets you  
know if you should view the caller list to see  
who called while you were out.  
L The Caller ID information will not be  
presented on incoming fax calls if Telecom  
FaxAbility is used.  
Using toll services from Telecom or  
another company  
Category features for handset  
phonebook  
Your telephone company may charge you  
for a local call if the number dialled has the  
area code prefix included. If this is  
unacceptable, dial only the 7-digit local  
number. Do not dial the {0} prefix or the area  
code.  
Categories can help you identify who is  
calling by using different ringtones for  
different categories of callers. When adding  
an entry to the handset phonebook you can  
assign it to the desired category (page 18).  
When a call is received from a caller  
assigned to a category, the category’s  
ringtone you select is used.  
Caller ID features  
When an outside call is received, the caller’s  
phone number can be displayed.  
Changing category ringtones  
L Phone numbers of the last 50 different  
callers will be logged in the caller list.  
You can select a ringtone for each category.  
If you select Ext. Ringtone, the unit  
will use the external ringtone you set on  
page 25 when calls from this category are  
L While listening to a message recorded by  
the answering system using the handset,  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID Service  
2 Select Category, then press {>}.  
was viewed or answered using  
another handset.  
3 Select a category, then press {>}.  
4 Press {C} or {s} to call back the  
displayed party.  
4 Select the current setting of the category  
ringtone, then press {>}.  
5 Select the desired ringtone, then press  
Note:  
{>}.  
L If you do not want to dial the area codes  
when making calls from the Caller ID list,  
you can store the area codes which you  
want the unit to delete automatically (page  
32).  
6 Press {ih}.  
Audible call for shared  
phonebook  
Audible call allows you to know who is  
calling without looking at the display. If you  
record an audible call announcement for a  
shared phonebook entry (page 21), the  
audible call recording will be announced  
when you receive a call from that person.  
Editing a caller’s phone number  
before calling back  
The caller’s telephone number, which is sent  
to your telephone from your local telephone  
exchange, includes 0and an area code  
prefix. For local calls, 0and the area code  
prefix can be omitted.  
Note:  
L Audible call announcements will not be  
announced from an extension if its ringer  
volume is turned off.  
1 Press {j/OK}.  
2 Select Caller List, then press  
{>}.  
3 Press {e} or {v} repeatedly to display  
the desired entry.  
Caller list  
4 To add a number  
Press the dial key ({0} to {9}).  
L The number you pressed is added to  
the top of the current number.  
Viewing the caller list and calling  
back  
Phone numbers of the last 50 different  
callers will be logged in the caller list. When  
the 51st call is received, the oldest caller  
information will be automatically erased.  
You can use this list to return missed calls.  
To erase a number  
Press {j/OK}, select Edit and  
Call, then press {>}.  
Press {<} or {>} to place the cursor on  
the number you wish to erase, then  
press {C/T}.  
1 Press {j/OK}.  
2 Select Caller List, then press  
5 Press {C} or {s}.  
{>}.  
L The most recent call is displayed.  
Erasing caller information  
3 Press {v} repeatedly to search from the  
most recent call, or press {e}  
repeatedly to search from the oldest call.  
1 Press {j/OK}.  
2 Select Caller List, then press  
{>}.  
L If the item has already been viewed or  
answered, “Q” is displayed, even if it  
3 Press {e} or {v} repeatedly to display  
the desired entry, then press {j/OK}.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caller ID Service  
4 Select Erase, then press {>}.  
L To erase all entries, select Erase  
All, then press {>}.  
5 Select Yes, then press {>}.  
6 Press {ih}.  
Storing caller information into the  
handset phonebook  
1 Press {j/OK}.  
2 Select Caller List, then press  
{>}.  
3 Press {e} or {v} repeatedly to display  
the desired entry, then press {j/OK}.  
4 Select Add Phonebook, then press  
{>}.  
5 Continue from step 3, “Adding entries to  
the handset phonebook”, page 18.  
Call minder  
Call minder is an automatic answering  
service offered by your service provider. If  
you subscribe to this service, your service  
provider’s call minder system can answer  
calls for you when you are unavailable to  
answer the phone or when your line is busy.  
Messages are recorded by the service  
provider, not your telephone.  
When you have new messages, 0 will be  
displayed on the handset.  
Please consult your service provider for  
details of this service.  
Note:  
L If 0 still remains on the display even  
after you have listened to new messages,  
turn it off by pressing and holding {C/T}  
for 2 seconds.  
L For more information on using the unit’s  
answering system and your service  
provider’s call minder, see page 44.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Answering System Features  
Answering system  
Turning the answering  
system on/off  
This unit contains an answering system  
which can answer and record calls for you  
when you are unavailable to answer the  
phone. You can also record your own voice  
memos (page 41) and phone conversations  
(page 15).  
Using the base unit  
Press {Answer on} to turn on/off the  
answering system.  
L When the answering system is turned on,  
the answer on indicator lights.  
Important:  
L Only 1 person can access the answering  
system (listen to messages, record a  
greeting message, etc.) at a time.  
L When the answering system is turned off,  
the answer on indicator turns off and the  
unit automatically plays new messages, if  
any.  
L When callers leave messages, the unit  
records the day and time of each  
message. Make sure the date and time  
have been set (page 11).  
Using the handset  
L The unit’s answering system will not  
answer incoming calls on your FaxAbility  
number.  
1 Press {j/OK}.  
2 Select Answer System, then press  
{>}.  
3 Select Answer Onor Answer Off,  
Memory capacity  
then press {>}.  
The total recording capacity (including your  
greeting message, caller messages, voice  
memos, audible call announcements, and  
recorded conversations) is about 15  
minutes. A maximum of 64 messages can  
be recorded.  
4 Press {ih}.  
Note:  
L When the answering system is turned on,  
u is displayed.  
Note:  
L If message memory becomes full:  
Answer Sys. Fullis shown on the  
handset display  
Greeting message  
When the unit answers a call, callers are  
greeted by a greeting message. You can  
record your own greeting message or use a  
prerecorded greeting message.  
– the answer on indicator on the base unit  
flashes rapidly  
– the total number of recorded messages  
flashes on the base unit display  
Erase unnecessary messages (page 40).  
Recording a greeting message  
You can record your own greeting message  
(2 minutes and 30 seconds max.).  
L Messages are retained even if a power  
failure occurs.  
Using the base unit  
1 Press and hold {d} for about 1 second.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Answering System Features  
L Speak clearly about 20 cm away from  
the microphone.  
Playing back the greeting  
message  
2 Press {5} to stop recording.  
L The greeting message is played back.  
Using the base unit  
Note:  
Press {d}.  
L If Eis displayed, record the greeting  
message again.  
Using the handset  
1 Press {j/OK}.  
Using the handset  
2 Select Answer System, then press  
1 Press {j/OK}.  
{>}.  
2 Select Answer System, then press  
3 Select Play Greeting, then press  
{>}.  
{>}.  
3 Select Record, then press {>}.  
4 Press {ih}.  
4 Select Record Greeting, then  
press {>}.  
Erasing the greeting message  
L Hold the handset about 20 cm away  
and speak clearly into the  
microphone.  
If you erase your own greeting message, the  
unit will play a prerecorded greeting  
message for callers.  
5 Press {j/OK} to stop recording.  
L The greeting message is played back.  
Using the base unit  
6 Press {ih}.  
Press {d}, then press {4} during playback.  
Note:  
Using the handset  
L If Erroris displayed, record the  
greeting message again.  
1 Press {j/OK}.  
2 Select Answer System, then press  
{>}.  
Using a prerecorded greeting  
message  
3 Select Erase Message, then press  
{>}.  
If you erase or do not record your own  
greeting message, the unit can play a  
prerecorded greeting message for callers  
and ask them to leave messages. If the  
message recording time (page 44) is set to  
Greeting Only, caller messages will  
not be recorded and the unit will play a  
different prerecorded greeting message  
asking callers to call again.  
4 Select Erase Greeting, then press  
{>}.  
5 Select Yes, then press {>}.  
6 Press {ih}.  
Listening to messages  
Messages are stored and played back  
chronologically, from oldest message to  
newest.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Answering System Features  
Listening to new/all messages  
When you have new messages:  
Repeating, skipping, stopping,  
erasing a message during  
playback  
– the answer on indicator on the base unit  
flashes  
L To repeat a message during playback:  
– for the base unit, press {<}  
– for the handset, press {<}  
If pressed within the first 5 seconds of a  
message, the previous message will be  
played.  
– the total number of new messages is  
shown on the handset display  
– the base unit beeps about once a minute if  
the message alert feature (page 44) has  
been turned on  
Note:  
L To skip a message during playback:  
– for the base unit, press {>}  
– for the handset, press {>}  
L The base unit display will show the total  
number of recorded messages.  
L To stop a message during playback:  
– for the base unit, press {5}  
– for the handset, press {9}  
L To erase a message during playback:  
– for the base unit, press {4}  
Using the base unit  
Press {5}.  
L If new messages have been recorded, the  
base unit plays back new messages.  
L If there are no new messages, the base  
unit plays back all messages.  
– for the handset, press {*}, {4}  
Note:  
L To adjust the speaker volume during  
playback, press {>} or {<} repeatedly. 9  
volume levels are available.  
Erasing all messages  
Using the base unit  
L After playing back all of the new  
messages, the answer on indicator will  
stop flashing but will remain lit up when  
the answering system is turned on.  
Press {4} 2 times.  
Note:  
L The greeting message is not erased.  
Using the handset  
Using the handset  
1 Press {j/OK}.  
1 Press {j/OK}.  
2 Select Answer System, then press  
2 Select Answer System, then press  
{>}.  
{>}.  
3 Select Erase Message, then press  
3 Select Play New Msg.or Play  
{>}.  
All Msg., then press {>}.  
4 Select Erase All, then press {>}.  
5 Select Yes, then press {>}.  
6 Press {ih}.  
Note:  
L To adjust the speaker volume during  
playback, press {e} or {v} repeatedly.  
L While listening to messages, you can  
switch between the receiver and speaker  
by pressing {C} or {s}.  
Note:  
L The greeting message is not erased.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Answering System Features  
Calling back using the handset  
(Caller ID subscribers only)  
If caller information was received for the call,  
you can call the caller back while listening to  
a message.  
Direct command  
operation using the  
handset  
You can operate the answering system by  
pressing dial keys, rather than navigating  
through the menus. To use the following  
commands, press {j/OK}, select  
1 Press {j/OK} during playback.  
2 Select Call Back, then press {>}.  
Note:  
Answer System, then press {>}.  
L To edit the number before calling back,  
select Edit and Call, press {>},  
edit the number, then press {C} or {s}.  
Key  
Direct commands  
{1}  
Repeat message (during  
*1  
playback)  
{2}  
Skip message (during  
playback)  
Recording a voice memo  
using the handset  
{3}  
Enter the Settingsmenu  
Play new messages  
{4}  
To leave a private message for yourself or  
someone else, you can record up to 3  
{5}  
Play all messages  
{6}  
Play greeting message  
Record memo message  
Record greeting message  
Turn answering system on  
Stop (recording, playback)  
Turn answering system off  
minutes of voice memo. This memo can be  
played back later, either directly or remotely.  
{7}{4}  
{7}{6}  
{8}  
1 Press {j/OK}.  
2 Select Answer System, then press  
{>}.  
{9}  
3 Select Record, then press {>}.  
{0}  
4 Select Record Memo, then press  
{*}{4} Erase this message (during  
playback)  
{>}.  
L Hold the handset about 20 cm away  
and speak clearly into the microphone.  
{*}{5} Erase all messages  
{*}{6} Erase greeting message  
5 Press {j/OK} to stop recording.  
6 Press {ih}.  
*1If pressed within the first 5 seconds of  
a message, the previous message will  
be played.  
Note:  
L Voice memos are treated as new  
messages.  
L If Erroris displayed, record the voice  
memo again.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Answering System Features  
26, 31) activates. You need to select 30  
sec.for activating the ring delay  
feature.  
Remote operation  
Using a touch tone phone, you can call your  
phone number from outside and access the  
unit to listen to messages or change  
Using the answering system  
remotely  
answering system settings. The unit’s voice  
guidance will prompt you to press certain  
dial keys to perform different operations.  
1 Dial your phone number from a touch  
tone phone.  
L If the number of rings is set to Auto,  
(page 43), the number of rings you  
hear will indicate whether or not you  
have new messages.  
Important:  
L In order to operate the answering system  
remotely, you must first turn on remote  
operation by setting a remote access  
code. This code must be entered each  
time you operate the answering system  
remotely.  
2 After the greeting message starts, enter  
your remote access code.  
L The unit will announce the number of  
new messages.  
L After 3 seconds, voice guidance starts.  
Turning remote operation on/off  
A 3-digit remote access code must be  
entered when operating the answering  
system remotely. This code prevents  
unauthorised parties from listening to your  
messages remotely. After you store your  
remote access code, remote operation is  
possible.  
3 Follow the voice guidance prompts as  
necessary.  
Note:  
L You can hang up at any time.  
L You can ignore the voice guidance and  
control the unit using remote commands  
(page 43).  
1 Press {j/OK}.  
2 Select Answer System, then press  
Voice guidance  
{>}.  
During remote operation, the unit’s voice  
guidance will prompt you to press {1} to  
perform a specific operation, or press {2} to  
listen to more available operations.  
Operations are presented by voice guidance  
in the following order:  
3 Select Settings, then press {>}.  
4 Select Remote Code, then press  
{>}.  
5 To turn on remote operation, enter a 3-  
digit remote access code.  
– Play back all messages  
– Play back new messages  
– Record a message  
L To turn off remote operation, press  
{*}.  
6 Press {j/OK}.  
7 Press {ih}.  
Note:  
– Erase all messages  
– Record your greeting message  
Note:  
L If you have stored the remote access  
code, you can turn on answering system  
by calling the unit even when it is turned  
off. This call may be answered before the  
ring delay feature of the night mode (page  
L If less than 5 minutes of recording time is  
available, the unit will announce the  
remaining recording time after the last  
message is played back.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Answering System Features  
L If message memory is full, erase  
unnecessary messages (page 43).  
L The greeting message is played back.  
L You can hang up, or enter your remote  
access code again and begin remote  
operation.  
Remote commands  
You can press dial keys to access certain  
answering system functions without waiting  
for the voice guidance to prompt you.  
Guide to answering  
system settings  
Key  
Remote command  
{1}  
Repeat message (during  
*1  
playback)  
If the base unit is reset to its default settings  
(page 34), the following answering system-  
related settings will be reset.  
{2}  
Skip message (during  
playback)  
{4}  
{5}  
{6}  
{7}  
{9}  
{0}  
Play new messages  
Answering Default  
system setting setting  
Page  
Play all messages  
Play greeting message  
Record greeting message  
Stop (recording, playback)  
Turn answering system off  
Answering  
system on/off  
Answer On page  
38  
Remote access  
code  
page  
42  
Number of  
rings  
4 Rings  
page  
43  
{*}{4} Erase this message (during  
playback)  
Caller’s  
recording time  
3 Minutes page  
44  
{*}{5} Erase all messages  
{*}{6} Erase greeting message  
(during greeting message  
playback)  
Call screening  
Message alert  
On  
page  
44  
Off  
page  
44  
{*}{#} End remote operation (or  
hang up)  
*1 If pressed within the first 5 seconds of  
a message, the previous message will  
be played.  
Changing the number of rings  
You can change the number of times the  
phone rings before the unit answers calls.  
You can select 2 to 7 rings, or Auto.  
Auto: The unit answers after 2 rings when  
new messages have been recorded, and  
after 5 rings when there are no new  
messages. If you call your phone from  
outside to listen to new messages (page  
42), you will know that there are no  
messages when the phone rings for the 3rd  
time. You can then hang up without being  
charged for the call.  
Turning on the answering system  
remotely  
If the answering system is off, you can turn it  
on remotely.  
1 Dial your phone number from a touch  
tone phone.  
2 Let the phone ring 15 times.  
L A long beep will be heard.  
1 Press {j/OK}.  
3 Enter your remote access code within 10  
seconds after the long beep.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Answering System Features  
2 Select Answer System, then press  
Selecting the caller’s recording  
time  
{>}.  
3 Select Settings, then press {>}.  
You can change the maximum message  
recording time allotted to each caller, or set  
the unit to greet callers but not record  
messages.  
4 Select Number of Rings, then  
press {>}.  
5 Select the desired setting, then press  
{>}.  
1 Press {j/OK}.  
6 Press {ih}.  
2 Select Answer System, then press  
{>}.  
For Telecom Call Minder or TelstraClear  
Message Mailbox service subscribers  
To receive Call Minder or Message Mailbox  
messages and use the unit’s answering  
system properly, please note the following:  
3 Select Settings, then press {>}.  
4 Select Recording Time, then press  
{>}.  
5 Select the desired setting, then press  
L “Call Minder” and “Message Mailbox” are  
services provided by your Service  
{>}.  
6 Press {ih}.  
Provider. You will need to first subscribe or  
activate this service through your Service  
Provider. Consult your Service Provider  
on how to operate this service and how  
you will be notified that you have  
Note:  
L When the message recording time is set  
to Greeting Only, d and “--” are  
displayed on the base unit.  
messages. To use this service you will be  
required to leave your answering machine  
off on your unit (page 38). This will allow  
the service to receive any messages. This  
unit has a visual indicator (0)to indicate  
new messages. Your Service Provider  
also uses a “Stutter” dial tone to indicate  
new messages.  
Turning call screening on/off  
While a caller is leaving a message, you can  
screen the call through the speaker of the  
base unit and the handset.  
1 Press {j/OK}.  
2 Select Answer System, then press  
L To use the unit’s answering machine  
rather than the service provided by your  
Service Provider, please consult your  
Service Provider to have it removed or  
deactivated permanently or temporarily.  
Alternatively you can leave this service  
connected and change the Number of  
Ringsto a shorter duration on your unit  
so your unit’s answering machine can pick  
up the call prior to the service provided by  
your Service Provider.  
{>}.  
3 Select Settings, then press {>}.  
4 Select Call Screening, then press  
{>}.  
5 Select Onor Off, then press {>}.  
6 Press {ih}.  
Turning message alert on/off  
This feature alerts you when new messages  
have been recorded. The base unit beeps  
about once a minute until you have listened  
to all new messages.  
Note:  
L This service can capture messages while  
the user is on a dial-up Internet  
connection.  
1 Press {j/OK}.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Answering System Features  
2 Select Answer System, then press  
{>}.  
3 Select Settings, then press {>}.  
4 Select New Msg. Alert, then press  
{>}.  
5 Select Onor Off, then press {>}.  
6 Press {ih}.  
Note:  
L If the base unit is in night mode, the base  
unit will not beep when new messages are  
recorded.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-unit Operation  
Operating additional units Registering a handset to a  
base unit  
Additional handsets  
Up to 6 handsets can be registered to a  
single base unit. Additional handsets will  
give you the freedom to, for example, have  
an intercom call with another handset while  
a third handset is on an outside call. See  
page 5 for information on ordering additional  
handsets.  
To register an additional handset to a  
base unit (easy registration)  
The included handset and base unit are  
preregistered. After purchasing an  
additional handset, register it to the base  
unit. Ensure that the additional handset is  
switched on. If it is not on, press and hold  
{ih} for few seconds to turn the handset  
on.  
Important:  
L The additional handset model  
recommended for use with this unit is  
noted on page 5. If other model handset is  
used, certain operations (handset  
settings, base unit settings, etc.) may not  
be available.  
1 Lift the additional handset and press  
{ih} to put the handset in standby  
mode.  
2 Press and hold {x} on the base unit for  
about 3 seconds, until the registration  
tone sounds.  
Additional base units  
3 Place the additional handset on the  
base unit. The registration tone  
continues to sound. With the handset  
still on the base unit, wait until a  
confirmation tone sounds and w stops  
flashing.  
Handsets can be registered to up to 4 base  
units, allowing you to add additional base  
units and extend the area in which your  
handset(s) can be used. If a handset moves  
out of range of its base unit when Autois  
selected on base unit selection (page 47), it  
will look for another base unit to make or  
receive calls. A base unit and the handsets it  
communicates with is called a “radio cell”.  
Note:  
L If an error tone sounds, or if w is still  
flashing, register the handset manually  
(manual registration; page 47).  
Note:  
L If all registered handsets start ringing in  
step 2, press {x} to stop. Start again from  
step 1.  
L Calls will be disconnected when the  
handset moves from one radio cell to  
another.  
L Charge the batteries of your additional  
handset for about 7 hours before initial  
use.  
L Intercom calls and call transfers are only  
possible between handsets in the same  
radio cell.  
L This registration method cannot be used  
for handsets that have already been  
registered to a base unit. Register the  
handset manually (manual registration;  
page 47).  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-unit Operation  
2 Select Handset Setup, then press  
To register a handset to an additional  
base unit (manual registration)  
{>}.  
3 Select Select Base, then press  
You can register a handset to a base unit  
manually using the following method.  
{>}.  
4 Select the desired base unit number, or  
1 Press {j/OK}.  
Auto, then press {>}.  
L The handset starts searching for the  
base unit.  
2 Select Handset Setup, then press  
{>}.  
3 Select Registration, then press  
{>} 2 times.  
Cancelling a handset  
4 Select a base unit number, then press  
A maximum of 6 handsets can be registered  
to a base unit. A handset can cancel its own  
registration (or the registration of another  
handset) that is stored in the base unit. This  
will allow the base unit to “forget” the  
handset.  
{>}.  
L This number is used by the handset  
as a reference only.  
5 Press and hold {x} on the base unit for  
about 3 seconds, until the registration  
tone sounds.  
1 Press {j/OK}.  
L If all registered handsets start ringing,  
press {x} to stop, then repeat this  
step.  
2 Select Base Unit Setup, then  
press {>}.  
3 Enter 0000(default base unit PIN).  
L After pressing {x}, the rest of this  
procedure must be completed within 1  
minute.  
L If you changed the PIN, enter it (page  
34).  
6 Wait until Enter Base PINis  
displayed, then enter 0000(default  
base unit PIN), then press {j/OK}.  
4 Enter 335.  
5 Select Cancel Handset, then press  
{>}.  
L If you changed the PIN, enter it (page  
34).  
L The numbers of all handsets  
registered to the base unit are  
displayed.  
L When the handset has been  
registered successfully, w will stop  
flashing. If keytones are turned on  
(page 28), a confirmation tone will be  
heard.  
6 Select the handset(s) you want to  
cancel, by pressing the desired handset  
number.  
L The selected handset number(s) will  
flash.  
Selecting a base unit  
L To cancel a selected handset number,  
press the number again. The number  
will stop flashing.  
When Autois selected, the handset will  
automatically use any available base unit it  
is registered to. When a specific base unit is  
selected, the handset will make and receive  
calls using that base unit only. If the handset  
is out of range of that base unit, no calls can  
be made.  
7 Press {j/OK}.  
8 Select Yes, then press {>}.  
9 Press {ih}.  
1 Press {j/OK}.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-unit Operation  
Important:  
Cancelling a base unit  
L Before registering the repeater to this  
base unit, you must turn the repeater  
mode on.  
A handset can be registered to a maximum  
of 4 base units. A handset can cancel a base  
unit that it is registered to. This allows the  
handset to “forget” the base unit.  
Turning the repeater mode on/off  
1 Press {j/OK}.  
1 Press {j/OK}.  
2 Select Handset Setup, then press  
2 Select Base Unit Setup, then  
{>}.  
press {>}.  
3 Select Registration, then press  
3 Enter 0000(default base unit PIN).  
{>}.  
L If you changed the PIN, enter it (page  
34).  
4 Enter 335.  
5 Select Cancel Base, then press  
4 Select Other Options, then press  
{>}.  
{>}.  
6 Enter 0000(default handset PIN).  
5 Select Repeater Mode, then press  
{>}.  
L If you changed the PIN, enter it (page  
28).  
6 Select Onor Off, then press {>}.  
7 Select the base unit(s) you want to  
cancel, by pressing the desired base unit  
number.  
7 Press {ih}.  
Note:  
L After turning repeater mode on or off,  
certain icons displayed on the base unit  
will disappear for a moment and w will  
flash on the handset momentarily. This is  
normal. The handset can be used once w  
stops flashing.  
L The selected base unit number(s) will  
flash.  
L To cancel a selected base unit  
number, press the number again. The  
number will stop flashing.  
8 Press {j/OK}.  
9 Select Yes, then press {>}.  
10 Press {ih}.  
Note:  
L While the repeater mode is turned on,  
audible call announcements may not be  
heard from the handset speaker.  
L To register the handset to another base  
unit or to the same base unit again, see  
manual registration (page 47).  
Intercom  
Intercom calls can be made between  
handsets/base unit in the same radio cell.  
Increasing the range of the base  
unit  
You can increase the range of the base unit  
by using a DECT repeater. Please use only  
the Panasonic DECT repeater noted on  
page 5. Consult your Panasonic dealer for  
details.  
Between a handset and the base  
unit  
When a handset calls the base unit  
1 Handset:  
Press {INT} and {0}.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-unit Operation  
L The base unit will ring.  
From a handset to the base unit  
2 Base unit:  
Press {s} to answer.  
When a handset transfers a call to the  
base unit  
3 Handset:  
When finished talking, press {ih}.  
Base unit:  
1 Handset:  
During an outside call, press {INT} and  
{0} to page the base unit.  
When finished talking, press {s}.  
When the base unit calls a handset  
L The outside call will be put on hold.  
L If there is no answer, press {INT} to  
return to the outside call.  
1 Base unit:  
Press {x} and the desired handset  
number.  
2 Base unit:  
Press {s} to answer the page.  
L The handset will ring.  
L The base unit user can talk with a  
handset user.  
L To page all handsets, press {x} and  
{0}. You can talk with the handset  
user who answers first. (Paging)  
3 Handset:  
L To stop paging, press {x} again.  
To complete the call transfer, press  
{ih}.  
To establish a conference call, press  
2 Handset:  
Press {C} or {s} to answer.  
{3}.  
3 Base unit:  
When finished talking, press {s}.  
Handset:  
Transferring a call without speaking to  
the base unit user  
When finished talking, press {ih}.  
1 During an outside call, press {INT} and  
{0} to page the base unit.  
L k flashes on the handset display to  
indicate the outside call is on hold.  
Between handsets  
Example: When handset 1 calls handset 2  
1 Handset 1:  
2 Press {ih}.  
Press {INT} and {2} (desired handset  
number).  
L The outside call rings at the base unit.  
L The handset 2 will ring.  
Note:  
L If the base unit user does not answer the  
call within 1 minute, the call will ring at  
your handset again.  
2 Handset 2:  
Press {C} or {s} to answer.  
3 When finished talking, press {ih}.  
From the base unit to a handset  
Transferring calls,  
conference calls  
When the base unit transfers a call to a  
handset  
1 Base unit:  
Outside calls can be transferred to the base  
unit or to a handset in the same radio cell. 2  
people in the same radio cell can have a  
conference call with an outside party.  
During an outside call, press {x} and  
the desired handset number to page the  
handset.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-unit Operation  
L The outside call will be put on hold.  
L If there is no answer, press {x} to  
return to the outside call.  
Transferring a call without speaking to  
the other handset user  
1 During an outside call, press {INT}, then  
press the desired handset number.  
2 Handset:  
Press {C} or {s} to answer the page.  
L k flashes to indicate the outside call  
is on hold.  
3 Base unit:  
To complete the call transfer, press {s}.  
To establish a conference call, press  
{3}.  
2 Press {ih}.  
L The outside call rings at the other  
handset.  
Transferring a call without speaking to  
the handset user  
Note:  
L If the other handset user does not answer  
the call within 1 minute, the call will ring at  
your handset again.  
1 During an outside call, press {x}, then  
press the desired handset number.  
L The in use indicator flashes to indicate  
the outside call is on hold.  
2 Press {s}.  
L The outside call rings at the handset.  
Note:  
L If the handset user does not answer the  
call within 1 minute, the call will ring at the  
base unit again.  
Between handsets  
Example: When handset 1 transfers a call  
to handset 2  
1 Handset 1:  
During an outside call, press {INT} and  
{2} (desired handset number).  
L The outside call will be put on hold.  
L If there is no answer, press {INT} to  
return to the outside call.  
2 Handset 2:  
Press {C} or {s} to answer the page.  
L Handset 2 can talk with handset 1.  
3 Handset 1:  
To complete the call transfer, press  
{ih}.  
To establish a conference call, press  
{3}.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful Information  
Wall mounting  
Screws  
Hook  
108 mm  
Note:  
L Make sure the screws are securely fastened to the wall.  
L Do not pinch the telephone line cord and AC adaptor cord between the base unit and the  
wall.  
L Use the following wall template to position the screws before drilling.  
108 mm  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful Information  
Available character entries  
The dial keys are used to enter characters and numbers. Each dial key has multiple  
characters assigned to it. The available character entry modes are, Alphabet, Numeric,  
Greek, Extended 1, Extended 2, and Cyrillic. When in Alphabet (ABC), Greek (F),  
Extended 1 (G), Extended 2 (H), or Cyrillic (I) character entry modes, you can select  
which character is entered by pressing a dial key repeatedly.  
L When the unit displays the character entry screen:  
– Press {<} or {>} to move the cursor.  
– Press dial keys to enter characters and numbers.  
– Press {C/T} to erase the character or number highlighted by the cursor. Press and hold  
{C/T} to erase all characters or numbers.  
– Press {*} to switch between uppercase and lowercase.  
To enter another character located on the same dial key, press {>} to move the cursor  
to the next space, then press the appropriate dial key.  
Character entry modes  
Several character entry modes are available. When the unit displays the character entry  
screen, press {k}, then select a character entry mode, and press {>}. The default mode is  
Alphabet.  
Alphabet character table (ABC)  
Numeric entry table (0-9)  
Greek character table (M)  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful Information  
Extended 1 character table (N)  
L The following are used for both uppercase and lowercase:  
Extended 2 character table (O)  
L The following are used for both uppercase and lowercase:  
Cyrillic character table (P)  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful Information  
Troubleshooting  
If you still have difficulties after following the instructions in this section, disconnect the AC  
adaptor and turn off the handset, then reconnect the AC adaptor and turn on the handset.  
Initial settings  
Problem  
Cause & solution  
w is flashing.  
L The handset is not registered to the base unit.  
Register it (page 46).  
L The handset is too far from the base unit. Move  
closer.  
L The AC adaptor is not connected. Check the  
connections.  
L You are using the handset or base unit in an area  
with high electrical interference. Locate the handset  
and base unit away from interference sources, such  
as antenna and mobile phones.  
The handset display is blank.  
The handset will not turn on.  
L The handset is not turned on. Turn the power on  
(page 11).  
L Make sure that the batteries are installed correctly  
(page 10).  
L Fully charge the batteries (page 10).  
L Clean the charge contact and charge again (page  
10).  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful Information  
Telephone  
Problem  
Cause & solution  
I cannot make or receive calls.  
L The AC adaptor or telephone line cord is not  
connected. Check the connections.  
L If you are using a BT double adaptor to connect the  
unit, remove the adaptor and connect the unit to the  
phone wall socket directly. If the unit operates  
properly, check or replace the adaptor.  
L Disconnect the base unit from the telephone line  
and connect the line to a known working telephone.  
If the working telephone operates properly, contact  
our service personnel to have the unit repaired. If  
the working telephone does not operate properly,  
contact your service provider.  
L The call bar feature is turned on. Turn it off (page  
28, 33).  
L You dialled a call restricted number (page 33).  
L The key lock feature is turned on. Turn it off (page  
14).  
The unit does not ring.  
L The ringer volume is turned off. Adjust the handset  
ringer volume (page 25) and the base unit ringer  
volume (page 17).  
L The night mode feature is turned on. Turn it off  
(page 26, 31).  
The batteries should be charging  
but the battery icon does not  
change.  
L Clean the charge contact and charge again (page  
10).  
L The AC adaptor is disconnected. Plug in the AC  
adaptor.  
A busy tone is heard when {C} is L The handset is too far from the base unit. Move  
pressed.  
closer and try again.  
L Another handset or the base unit is on an outside  
call. Wait for the other user to complete the call.  
Static is heard, sound cuts in and  
out. Interference from other  
electrical units.  
L Locate the handset and the base unit away from  
other electrical appliances.  
L Move closer to the base unit.  
L Your unit is connected to a telephone line with  
ADSL (JetStream) service. We recommend that  
you contact your ADSL service provider to have an  
ADSL Splitter installed. We do not recommend the  
use of generic ADSL filters.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful Information  
Problem  
Cause & solution  
Noise is heard during a call.  
L You are using the handset or base unit in an area  
with high electrical interference. Locate the handset  
and base unit away from interference sources, such  
as antenna and mobile phones.  
The handset/base unit stops  
working while being used.  
L Disconnect the AC adaptor and turn off the  
handset. Connect the AC adaptor, turn on the  
handset and try again.  
While storing an entry in the  
phonebook or assigning a one  
touch dial, the handset starts to  
ring.  
L A call is being received. To answer the call, press  
{C}. Programming will be cancelled. Start again.  
Pressing {R} does not  
display/dial the last number dialled.  
L The redialled number was more than 24 digits long.  
Redial the number manually.  
The handset beeps intermittently  
and/or 7 flashes.  
L Fully charge the batteries (page 10).  
I fully charged the batteries, but  
7 still flashes.  
L Clean the charge contact and charge again (page  
10).  
L It is time to replace the batteries (page 11).  
Caller information is not displayed. L You must subscribe to Caller ID service.  
L Your unit is connected to a telephone line with  
ADSL (JetStream) service. We recommend that  
you contact your ADSL service provider to have an  
ADSL Splitter installed. We do not recommend the  
use of generic ADSL filters.  
While viewing caller information,  
the display returns to standby  
mode.  
L Do not pause for over 1 minute while searching.  
I cannot set call restriction.  
L Call restriction can be set using handset 1 only. If  
you have multiple handsets, you can confirm which  
handset is handset 1 by pressing {x} and {1} on  
the base unit. Handset 1 will start ringing.  
I cannot register a handset to a  
base unit.  
L The maximum number of base units (4) are already  
registered to the handset. Cancel unused base unit  
registrations from the handset (page 48).  
L The maximum number of handsets (6) are already  
registered to the base unit. Cancel unused handset  
registrations from the base unit (page 47).  
L You entered the wrong PIN number. If you forget  
your PIN, consult your nearest Panasonic service  
centre.  
L Locate the handset and the base unit away from  
other electrical appliances.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful Information  
Answering system  
Problem  
Cause & solution  
The other party complains that they L The recording time is set to Greeting Only.  
cannot leave a message.  
Select 1 Minuteor 3 Minutes(page 44).  
L Message memory is full. Erase unnecessary  
messages (page 40).  
I cannot operate the answering  
system.  
L Another handset or the base unit user is using the  
answering system, accessing the caller list or  
changing base unit settings. Wait for the other user  
to finish.  
L A caller is leaving a message. Wait for the caller to  
finish.  
L The handset is too far from the base unit. Move  
closer.  
I cannot operate the answering  
system remotely.  
L You are entering the wrong remote access code.  
Confirm that the correct remote code is entered. If  
you forget the remote access code, store a new  
remote access code again (page 42).  
L You are pressing the dial keys too quickly. Press  
each key firmly.  
L The answering system is turned off. Turn it on (page  
43).  
L You are using a pulse telephone. Try again using a  
touch tone phone.  
While recording a greeting  
message or listening to messages,  
the unit rings and recording stops.  
L A call is being received. Answer the call and try  
again later.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful Information  
Specifications  
Standard:  
GAP (Generic Access Profile)  
Number of channels:  
120 Duplex Channels  
Frequency range:  
1.88 GHz to 1.9 GHz  
Duplex procedure:  
TDMA (Time Division Multiple Access)  
Channel spacing:  
1,728 kHz  
Bit rate:  
1,152 kbit/s  
Modulation:  
GFSK (Gaussian Frequency Shift Keying)  
RF transmission power:  
Approx. 250 mW  
Voice coding:  
ADPCM 32 kbit/s  
Power source:  
220–240 V, 50 Hz  
Power consumption, Base unit:  
Standby: Approx. 3.8 W  
Maximum: Approx. 9.2 W  
Operating conditions:  
5 °C–40 °C, 20 %–80 % relative airhumidity  
(dry)  
Dimensions:  
Base unit: Approx. 86 mm × 183 mm ×  
122 mm  
Handset: Approx. 148 mm × 48 mm ×  
32 mm  
Mass (weight):  
Base unit: Approx. 425 g  
Handset: Approx. 130 g  
Note:  
L Specifications are subject to change.  
L The illustrations used in these operating  
instructions may differ slightly from the  
actual product.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Language: 27  
Standby mode: 27  
Index  
E
Emergency numbers: 32  
A Alarm: 25  
H Handset  
Additional handsets: 46  
Answering calls  
Base unit: 17  
Handset: 17  
Cancelling: 47  
PIN: 28  
Power on/off: 11  
Registration: 46  
Resetting: 29  
Settings: 24  
Answering system: 38  
Listening to messages: 39  
Remote operation: 42  
Settings: 43  
Turning on/off: 38  
Audible call: 21, 22, 36  
Auto talk: 17, 28  
I
Intercom: 48  
K Key lock: 14  
Keytones: 28  
B Base unit  
M Making calls  
Base unit: 15  
Handset: 13  
Additional base units: 46  
Cancelling: 48  
PIN: 34  
Missed calls: 35  
Mute: 14, 16  
Resetting: 34  
Selecting: 47  
Settings: 30  
N Night mode  
Base unit: 31  
Handset: 26  
Battery  
Charge: 10  
Installation: 10  
Life: 11  
O One touch dial: 19  
P
Paging: 49  
Pause: 15, 16, 32  
Phonebook copy: 23  
Phonebooks  
Replacement: 11  
Strength: 10  
C Call bar  
Handset phonebook: 18  
Shared phonebook: 21  
PIN  
Base unit: 33  
Handset: 28  
Caller ID service: 35  
Call minder: 37  
Call restriction: 33  
Call waiting: 15, 16  
Category: 18  
Base unit: 34  
Handset: 28  
Power on/off: 11  
R Recall: 15, 16, 32  
Recording  
Audible call: 21  
Ringtones: 35  
Chain dial: 20  
Greeting message: 38  
Character entry: 52  
Conference calls: 49  
Connections: 9  
Telephone conversations: 15  
Voice memo: 41  
Redialling: 13, 16  
Redial list: 13  
D Date and time: 11  
Display (Base unit)  
Icons: 9  
Registration: 46  
Repeater: 48  
Ringtones  
Display (Handset)  
Contrast: 27  
Icons: 8  
Base unit: 17  
Handset: 25  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
S
T
V
Speakerphone: 13, 15  
Transfer calls: 49  
Voice enhancer: 14  
Volume  
Receiver: 13  
Ringer (Base unit): 17  
Ringer (Handset): 25  
Speaker (Base unit): 16  
Speaker (Handset): 13  
W Wall mounting: 51  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Support Centre Tel. No.: (09) 272 0178  
Sales Department:  
Panasonic New Zealand Ltd.  
350 Te Irirangi Drive  
East Tamaki  
Private Bag 14911  
Panmure  
Auckland  
NEW ZEALAND  
Panasonic Communications Co., Ltd.  
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan  
Copyright:  
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced  
for internal use only. All other reproduction, in whole or in part, is prohibited without the written  
consent of Panasonic Communications Co., Ltd.  
© 2005 Panasonic Communications Co., Ltd. All Rights Reserved.  
PQQX14600ZA CT0605FK0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Clothes Dryer T 4222 C User Manual
Miele Ventilation Hood DA2210 User Manual
Miele Washer Premier 300 User Manual
Mr Coffee Espresso Maker ECM20 User Manual
Multi Link Cordless Telephone Multi Link TeleVoIP Stick User Manual
Niles Audio Home Security System CAM PB User Manual
Nokia Network Router M1122 User Manual
Onkyo CD Player CR 515DAB User Manual
Ozaki Worldwide Speaker EM98723 User Manual
Panasonic VCR AG 2530P User Manual