F566077
Operating Instructions
Air Conditioner
Indoor Unit
CS-F14DB4E5
CS-F18DB4E5
CS-F24DB4E5
CS-F28DB4E5
CS-F34DB4E5
CS-F43DB4E5
CS-F50DB4E5
Outdoor Unit
Inverter Model
(HBE5 Series)
(DBE5, DBE8 Series)
CU-L24DBE5
CU-L28DBE5
CU-L34DBE5
CU-L43DBE5
CU-L34DBE8
CU-L43DBE8
CU-L50DBE8
CU-YL24HBE5
CU-YL28HBE5
CU-YL34HBE5
CU-YL43HBE5
(GBE5 Series)
CU-YL24GBE5
CU-YL28GBE5
CU-YL34GBE5
CU-YL43GBE5
ENGLISH
2 ~ 11
Before operating the unit, read these operating
instructions thoroughly and keep them for future
reference.
ESPAÑOL
12 ~ 21
Antes de utilizar la unidad, sírvase leer atentamente
estas instrucciones de funcionamiento y conservarlas
como futuro elemento de consulta.
Heat-pump Model
CU-B14DBE5
CU-B18DBE5
CU-B24DBE5
CU-B28DBE5
CU-B34DBE5
CU-B28DBE8
CU-B34DBE8
CU-B43DBE8
CU-B50DBE8
ITALIANO
22 ~ 31
Prima di utilizzare l’unità si prega di leggere
attentamente le istruzioni e di conservare questo
opuscolo per potervi fare riferimento in futuro.
DEUTSCH
32 ~ 41
Bevor Sie das Gerät in Betrieb nehmen, lesen Sie bitte
diese Bedienungsanleitung aufmerksam durch und
bewahren Sie sie für die künftige Verwendung auf.
Cooling Model
CU-J14DBE5
CU-J18DBE5
CU-J24DBE5
CU-J28DBE5
CU-J34DBE5
CU-J24DBE8
CU-J28DBE8
CU-J34DBE8
CU-J43DBE8
CU-J50DBE8
PORTUGUÊS
42 ~ 51
Antes de ligar a unidade, leia cuidadosamente
este manual de utilização e guarde-o para futura
referência.
NEDERLANDS
52 ~ 61
Lees voor u het apparaat gebruikt deze
gebruiksinstructies grondig en bewaar ze voor
toekomstig gebruik.
QUICK GUIDE / GUÍA RÁPIDA
GUIDA RAPIDA / KURRZZAANNLLEEIITTUUNNGG
GUΙA RÁPIDO / SNELLE GIDS
© 2008 Panasonic HA Air-Conditioning (M) Sdn. Bhd.
(11969-T). All rights reserved. Unauthorized copying
and distribution is a violation of law.
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing
Air Conditioner
RREEGGUULLAATTOORRYY IINNFFOORRMMAATTIIOONN
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
TABLE OF CONNTENTS
SAFETY PRECAUTIONS
2
OPERATION CONDITION
Use this air conditioner under the following temperature range
REGULATORY INFORMATION
3
Model
Temperature (°C)
Maximum
Indoor
Outdoor
PRODUCT OVERVIEW &
OPERATIONS
(WIRELESS REMOTE CONTROL)
32
21
27
16
32
21
27
16
32
21
43
-15*
24
-20
43
-10**
24
-10
43
COOLING
HEATING
COOLING
HEATING
COOLING
Inverter
(GBE5, DBE5,
DBE8 Series)
Minimum
Maximum
Minimum
Maximum
Minimum
Maximum
Minimum
Maximum
Minimum
4~5
PRODUCT OVERVIEW &
OPERATIONS
(WIRED REMOTE CONTROL)
6~8
Heat-pump
Cooling
CARE & CLEANING
9
-10**
TROUBLESHOOTING
10~11
NOTICE: This unit is still able to operate as a cooler with outdoor temperature as low as
-15°C*/ -10°C** in a non-living room, such as a computer room, with a room
temperature of 21°C or above, and room humidity up to 45%.
QUICK GUIDE
BACK COVER
(CU-YL24HBE5, CU-YL28HBE5, CU-YL34HBE5, CU-YL43HBE5)
Temperature (°C)
Maximum
Indoor
Outdoor
NOTE :
32
21
27
16
43
-5
24
-15
COOLING
Minimum
Maximum
Minimum
The illustrations in this manual are
for explanation purposes only and
may differ from the actual unit. It is
subjected to change without notice
for future improvement.
HEATING
NOTICE: This unit is still able to operate as a cooler with outdoor temperature as low
as -5°C in a non-living room, such as a computer room, with a room
temperature of 21°C or above, and room humidity up to 45%.
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and
2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement
set by the Directive for the chemical involved.
Pb
• Do not switch ON the unit when waxing the floor. After waxing, aerate the room properly before operating the unit.
• Do not install the unit in oily and smoky areas.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PPRROODDUUCCTT OOVVEERRVVIIEEWW && OOPPEERRAATTIIOONNSS
((WWIIRREELLEESSSS RREEMMOOTTEE CCOONNTTRROOLL))
Control Panel
POWER
TIMER
Ray receiver
FILTER
ECONOMY
AUTO
ODOUR WASH
Auto OFF/ON button
•
To operate the unit if the wireless remote control
is misplaced or malfunctioning.
Action
Mode
Press once.
Press and hold until you hear 1 beep,
then release.
Auto
Air is discharged
evenly
Cooling
Airflow direction louver
Air filter
1.Press and hold until you hear 2
beeps then release.
Heating
2.Press the SET button for 5 seconds.
Press the button to turn off.
Intake grille
Transmitter
Maximum distances: 8m
Remote Control Preparation
Remote control
display
Press and pull out
Set time
4
5
6
1
MODDEE
F
A
N
SPEE
D
Insert AAA or R03 batteries
(can be used ~ 1 year)
2
Confirm
3
Press CLOCK
Close the cover
ON
OFF/ON
ECONOMY
TO TURN ON OR OFF THE
UNIT
POWER
OFF/ON
ODOUR W
ASH
FIL
TER RESET
TO SET TEMPERATURE
F
A
N SPEED
SELECT
• Selection range: 16°C ~ 31°C.
4
5
3
MODE
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode according to temperature setting,
outdoor and room temperature.
2
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
6
(Applicable for Inverter / Heat-pump Model)
FAN mode - To enables air circulation in the room
COOL mode - To enjoy cool air
1
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
• During soft dry operation, the indoor fan operates at a low fan
speed.
• The louvers movement might not align with the remote control
display.
Inverter / Heat-pump Model
CZ-RL513B
Cooling Model
CZ-RL013B
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TO SET DAILY TIMER
FAN SPEED
TO SELECT FAN SPEED (3 OPTIONS)
AUTO
LOW
MEDIUM
HIGH
• To turn ON or OFF the unit at a preset time.
TIMER
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If the operation mode is set to Fan, the fan speed will
be fixed at MEDIUM regardless of the temperature
setting.
SELECT
SET
Select ON or
OFF timer.
Set the time.
Confirm.
AIR SWING
TO ADJUST AIRFLOW
CANCEL
MANUAL
AUTO
• To cancel ON or OFF timer, press
.
DIRECTION
• Keeps the room ventilated.
• When ON timer is set, the unit may start early before
the actual set time in order to achieve the desired
temperature on time.
• The air is discharge evenly through 4 output vents.
AUTO 1
AUTO 2
AUTO 3
AUTO
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control preparation.
• There are 3 options for auto vertical airflow direction.
• The vertical airflow louver swings up and down
automatically.
• The timer closest to the current time will be activated
first.
• Do not adjust the vertical airflow direction louvers by
hand.
• If timer is cancelled manually, you can restore the
SET
previous setting by pressing
.
• If the main power is switched off for an hour or more,
the clock and timer will need to be set again.
MANUAL
• There are 4 options for manual vertical airflow
direction.
• The airflow direction can be adjusted as desired by
using remote control.
OPTIONNAL SETTINGS
TO REDUCE POWER
CONSUMPTION
• Recommend to use when desired room temperature is
reached.
• Economy operation can be activated in all modes and
can be cancelled by pressing the respective button
again.
ECONOMY
ECONOMY
•
To avoid unintentional operation, you can
assign a different address to each indoor
unit.
•
Press repeatedly to select your desired
address setting.
Group
Address 1
Address 2
Address 3
ADDRESS
•
•
By default, ADDRESS 1 is selected. You
do not need to change this setting for
normal operation.
If the address is set to GROUP, more
than one indoor unit can be operated at
the same time.
ODOUR WASH
ODOUR WASH
ODOUR REMOVING
• Applicable for all models.
• Helps to remove unpleasant odour from the
surrounding area during operation.
• To enable the odour removing function, press the
Press to restore the remote control’s default
setting.
ODOUR WASH
RESET
SET
once.
• To cancel, press the respective button again.
ODOUR CLEAR
Not used in normal operations.
• Applicable for Inverter model only.
• To remove odour and minimize the growth of odour
causing moulds in the air conditioner’s interior section.
HINTS
ODOUR WASH
• To enable this function, press the
3 seconds.
for more than
• Set the temperature 1°C higher in cool mode or 2°C
lower in heat mode than the desired temperature to
achieve a 10% power saving.
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
• The unit will automatically perform Fan and Heating
modes for approximately 20 minutes and then stops
automatically.
• Recommended to open the windows during this
operation.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PPRROODDUUCCTT OOVVEERRVVIIEEWW && OOPPEERRAATTIIOONNSS
((WWIIRREEDD RREEMMOOTTEE CCOONNTTRROOLL))
Air is discharged
evenly
Airflow direction louver
Air filter
Intake grille
OFF / ON
TO TURN ON OR OFF THE UNIT
UP
FAN SPEED
AUTO
AUTO
TO SET TEMPERATURE
MON TUE WED THU FRI SAT SUN
ON
DOWN
AIR SWING
AUTO 123
• Selection range: 16°C ~ 31°C.
OFF / ON
MODE
CZ-RD513C
TIMER/CLOCK
MODE
3
2
TEMP/
TO SELECT OPERATION MODE
A/C No.
FAN
SPEED
UP
SET
MODE
UP
AUTO mode - For your convenience
• Unit selects operation mode according to temperature
setting, outdoor and room temperature.
SELECT DOWN CANCEL
DOWN
AUTO MANUAL
AIR SWING
ECONOMY
CHECK ODOUR WASH
VENTILATION TEST RUN FILTER RESET
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
(Applicable for Inverter / Heat-pump Model)
1
FAN mode - To enables air circulation in the room
COOL mode - To enjoy cool air
CZ-RD513C
• For normal operation, the
buttons are not in use.
and
TEST RUN
VENTILATION
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
• During soft dry operation, the indoor fan operates at a
low fan speed.
• The louvers movement might not align with the remote
control display.
Remote Control Preparation
SELECT
1
2
3
4
Press
Press to set day
Confirm
Repeat steps 2 and 3 to set the
current time.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FAN
SPEED
TO SET DAILY TIMER
TO SELECT FAN SPEED (3 OPTIONS)
• To turn ON or OFF the unit at a preset time.
AUTO
LO
MED
HI
1
MODE
2
SELECT
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If the operation mode is set to Fan, the fan speed will
be fixed at MED regardless of the temperature setting.
Enter daily timer mode. Select ON or OFF timer.
3
UP
4
AUTO MANUAL
TO ADJUST AIRFLOW
DIRECTION
SET
AIR SWING
• Keeps the room ventilated.
• The air is discharge evenly through 4 output vents.
DOWN
AUTO 1
AUTO 2
AUTO 3
Set the time.
Confirm.
AUTO
CANCEL
• To cancel ON or OFF timer, press
.
• There are 3 options for auto vertical airflow direction.
• The vertical airflow louver swings up and down
automatically.
• Do not adjust the vertical airflow direction louvers by
hand.
• When ON timer is set, the unit may start early before
the actual set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control preparation.
MANUAL
• The timer closest to the current time will be activated
• There are 4 options for manual vertical airflow
direction.
• The airflow direction can be adjusted as desired by
using remote control.
first.
• If timer is cancelled manually, you can restore the
SET
previous setting by pressing
.
ECONOMY
• If the main power is switched off for an hour or more,
the clock and timer will need to be set again.
TO REDUCE POWER CONSUMPTION
• Recommend to use when desired room temperature is
reached.
• Economy operation can be activated in all modes and
can be cancelled by pressing the respective button
again.
HINTS
• Set the temperature 1°C higher in cool mode or 2°C
lower in heat mode than the desired temperature to
achieve a 10% power saving.
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
ODOUR WASH
ODOUR REMOVING
• Applicable for all models.
• Helps to remove unpleasant odour from the
surrounding area during operation.
• To enable the odour removing function, press the
ODOUR WASH once.
• To cancel, press the respective button again.
ODOUR CLEAR
• Applicable for Inverter model only.
• To remove odour and minimize the growth of odour
causing moulds in the air conditioner’s interior section.
• To enable this function, press the ODOUR WASH for more than
3 seconds.
• The unit will automatically perform Fan and Heating
modes for approximately 20 minutes and then stops
automatically.
• Recommended to open the windows during this
operation.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TO SET WEEKLY TIMER
OPERATION DETAILS
•
Weekly timer is only applicable for wired remote
MODE
control, press
for 3 seconds to select daily
FAN SPEED
AUTO
AUTO
MUE WED THU FRI SA SUN
ON
T
OFF / O
timer or weekly timer.
AIR SWING
AUTO 123
CZ-RD513C
TIMER/CLOCK
MODE
•
•
•
Daily timer and weekly timer could not be set at the
same time.
Promotes energy saving by allowing you to set up to
6 timers in any given day.
Same timer program cannot be set on the same day.
OFF / ON
UP
SET
CZ-RD513C
TIMER/CLOCK
MODE
TEM
A/C
FAN
SPEED
UP
SET
MODE
SELECT DOWN CANCEL
SELECT DOWN CANCEL
DOW
AUTO MANUAL
AIR SWING
ECONOMY
CHECK ODOUR WASH
VENTILATION TEST RUN FILTER RESET
ECONOMY
CHECK ODOUR WASH
VE
Check Timer
Will light up if Timer
operation is selected
1. Enter timer mode.
2. Select the day.
TIMER/CLOCK
MODE
UP
SET
6 different programs can
be set in a day (1 ~ 6)
SELECT DOWN CANCEL
TIMER
1
2
3
4
5
6
Indicate the
selected day
3. The display will show the program for each of the
selected day.
MON TUE WED THU FRI SAT SUN
ON
Time to be
selected (Interval
10 minutes)
OFF
Modify Or Add Timer
• Perform check timer operation to select the day.
Repeat steps 4 to 8 to modify existing timer program,
or add any new timer program.
OFF-Timer. To automatically
switch “OFF” the unit.
ON-Timer. To automatically switch “ON” the unit.
Day to be selected
Cancel Timer
• Perform the step below to cancel the timer program
for a particular day.
Change Display
1. Enter timer mode.
TIMER/CLOCK
MODE
MODE
UP
SET
1. Press for 3 seconds to change the display to
weekly timer.
2. Select the day.
SELECT DOWN CANCEL
Select days to run timer
2. Press SELECT to enter day setting.
3. Press to enter day
setting.
4. Press to cancel the
timer set.
3. Press
to select your desired day.
The selected day will be highlighted with
.
SET
Press
to deselect or select
mark.
Repeat this step includes other day.
Select ON/OFF Timer
4. Press SELECT to enter Timer 1.
Disable Weekly Timer
• To disable weekly timer setting, press MODE , then
CANCEL
5. Press
6. Press
to choose ON or OFF.
press
.
SET
to confirm the selection.
Enable Weekly Timer
MODE
Select Timer
• To enable previous weekly timer setting, press
,
SET
7. Press
to select your desired time.
then press
.
If you want to set together with your desired
UP
DOWN
temperature, press
to select the temperature.
SET
8. Press
to confirm the setting.
• Repeat steps 5 to 8 to set Timer 2 to 6, or press CANCEL
to cancel the related timers.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CCAARREE && CCLLEEAANNIINNGG
• Switch off the power supply before cleaning.
• Do not touch the aluminium fin, sharp parts may cause injury.
CAUTION
HINTS
WASHING INSTRUCTIONS
• Clean the filter regularly for best performance and to
reduce power consumption.
• Please consult your nearest dealer for seasonal
inspection.
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
Remove Air Filter
1 Press the kknobs.
Air Filter Installation
1
INDOOR UNIT
Wipe the unit gently with a
soft, dry cloth.
Insert the air filter
to the tabs of the
intake grille.
2
3
Slowly bring
up the intake
grille.
2 Slowly puull down
the intakke griille.
Knob
Remove
3 Remove the aair filter
from tthe tabbs and ppull it
downwaards.
Press the knobs to the
CLOSE side.
AIR FILTER
Vacuum, wash and dry.
Air Filter Maintenance
Cleaning is needed when:
• lt is recommended to clean the air filter every 6
weeks.
FAN SPEED
AUTO
FAN
AUTO
FILTER RESET
FILTER
RESET
• After the air filter is cleaned, press
reset.
/
to
“FILTER RESET” appears on
the remote control display.
(For wired remote control)
COOL DRY
FILTER RESET
AIR SWING
AUTO 123
• Do not operate without an air filter.
• Wash/rinse the air filter gently with water to avoid
damage to the air filter surface.
POWER
• Do not dry the part with a hair dryer or a stove.
“FILTER” lights up on the
indicator display.
(For wireless remote control)
TIMER
FILTER
• Replace any damaged air filter.
ECONOMY
AUTO
ODOUR WASH
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TTRROOUUBBLLEESSHHOOOOTTIINNGG
The folllowinngg symptooms do nnot iinnddiiccaatte mmaallffuunnccttiioonn..
Symptom
Cause
Mist emerges from indoor unit.
Water flowing sound during operation.
The room has a peculiar odour.
• Condensation effect due to cooling process.
• Refrigerant flow inside the unit.
• This may due to damp smell emitted by the wall, carpet, furniture or
clothing.
Indoor fan stops occasionally during automatic • This helps to remove the surrounding odours.
fan speed setting.
Operation is delayed a few minutes after
restart.
• The delay is a protection to the unit’s compressor.
Outdoor unit emits water/steam.
Timer indicator is always on.
• Condensation or evaporation occurs on pipes.
• The timer setting repeats daily once set.
• To avoid unintended cooling effect.
Indoor fan stops occasionally during heating
operation.
Cracking sound can be heard during
operation.
• Changes of temperature cause the expansion/contraction of the unit.
Unit switch to FAN operation and air become • This happens when the room temperature reaches the set temperature,
humid.
operation switches to FAN mode and the humidity increase.
Outdoor unit emits noise during heating
operation.
• This is due to changes inflow of refrigerant gas when operation stops
and starts.
Operation does not stop immediately after
pressed the OFF/ON button.
• Discharging heat is in process. Operation will stops automatically after
approximately 60 seconds.
Operation stops occasionally. (“DEFROST”
appears on the remote control display)
• The unit is in defrosting mode, and the melted frost is drained from the
outdoor unit.
Airflow does not start immediately after
operation is started. (“PRE HEAT” appears on
the remote control display)
• The unit is warming up to provide warm air.
Operation starts after power resumes.
During dry mode, cold air blow out.
• Auto restart is in function and operates under previous setting.
• The unit is running cooling operation with low fan speed to dehumidify
the room.
Fan speed change occasionally during heating • The room temperature has reached the remote control setting. When the
mode.
room temperature drops again, the fan speed will resume to the remote
control settings.
Outdoor unit emits steam during heating
mode.
• This is due to defrost operation happens at the heat exchanger.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Checkk the folllowinng befoorre calliing forr serviicing.
Symptom
Check
Heating/Cooling operation is not working
efficiently.
• Set the temperature correctly.
• Close all doors and windows.
• Clean or replace the filters.
• Clear any obstruction at the air inlet and air outlet vents.
Heating mode cannot be operated.
Noisy during operation.
• The unit is forced to operate at cooling mode only in a non-living room,
such as a computer room.
• Check if the unit has been installed at an incline or the intake grille is not
closed properly.
Remote control does not work.
(Wireless remote control display is dim or
transmission signal is weak.)
• Insert the batteries correctly.
• Replace weak batteries.
The unit does not work.
• Check if the circuit breaker is tripped.
• Check if timers have been set.
The unit does not receive the signal from the
remote control.
• Make sure the receiver not obstructed.
• Make sure the address is set correctly.
• Make sure the remote control signal transmission is within the range.
• Certain fluorescent lights may interfere with signal transmitter. Please
consult your nearest dealer.
“CHECK” Dispplay on Wirred Remotee Control.
If the CHECK indicator flashes on the wired
remote control.
• Turn off the unit.
• Turn on again after 3 minutes.
• If CHECK continues to blink, press CHECK for error messages. If problem
persist, please consult your nearest authorized dealer.
FOR SEASONAL INSPECTION AFTER EEXXTTEENNDDEEDD
NON-USE
• Checking of remote control batteries (wireless remote
control).
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then CALL Authorized
Distributor under the following conditions:
• Abnormal noise during operation.
• No obstruction at air inlet and air outlet vents.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
Cooling: ≥ 8°C
Heating: ≥ 14°C
FOR EXTENDED NON-USE
• Activate heat mode (Inverter/Heat-pump model) or Fan
mode (Cooling model) for 2~3 hours to remove moisture
left in the internal parts thoroughly.
• The odour persists even after odour wash operation is
used continuously.
• Turn off the power supply.
• Remove the remote control batteries (wireless remote
control).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK GUIDE/GUÍA RÁPIDA/GUIDA RAPIDA/
KURZANLEITUNG/GUIA RÁPIDO/SNELLE GIDS
WIRELESS REMOTE CONTROL • CONTROL REMOTO INALÁMBRICO • TELECOMANDO WIRELESS O SENZA FILI •
INFRAROT-FERNBEDIENUNGG • CONTROLO REMOTTO SEM FIIO • DRAADLOZE AFSTANDSBEDIENING
1
MODE
Inverter/Heat-pump
model
Select the desired mode.
Seleccione el modo deseado.
Selezionare la modalità desiderata.
Wählen Sie die gewünschte Betriebsart aus.
Seleccione o modo de funcionamento pretendido.
Selecteer de gewenste stand.
AUTO
DRY
HEAT
COOL FAN
Cooling model
AUTO FAN
MMOODDEE
AIR SWING FAN SPEED
AUTO
AUTO
ADDRESS
ECONOMY
TIMER
ON
DRY COOL
Start/stop the operation.
OFF/ON
2
3
Inicie/detenga el funcionamiento.
Avviare/arrestare l’apparecchio.
Schalten Sie das Gerät ein bzw. aus.
Ligue/Desligue a unidade.
OFF/ON
MODE
AUTO
ODOUR WASH
FILTER RESET
FAN SPEED
AIR SWING
Start/stop het apparaat.
MANUAL
Select the desired temperature.
SELECT
CLOCK
SET
Seleccione la temperature deseada.
Selezionare la temperatura desiderata.
Stellen Sie die gewünschte Temperatur ein.
Programe a temperatura desejada.
Stel de gewenste temperatuur in.
CANCEL
TIMER
RESET ADDRESS SET
WIRED REMOTE CONTROL • CONTROL REMOTO CON CABLES • TELECOMANDO CABLATO •
KABELFERNBEDIENUNG • CONTROLO REMOTO CCOM FIOOS • BEDRADE AFSTANDSBEDIENINGG
Start/stop the operation.
1
Inicie/detenga el funcionamiento.
OFF / ON
MODE
Avviare/arrestare l’apparecchio.
Schalten Sie das Gerät ein bzw. aus.
Ligue/Desligue a unidade.
Start/stop het apparaat.
2
3
FAN SPEED
AUTO
AUTO
MON TUE WED THU FRI SAT SUN
ON
Select the desired mode.
Seleccione el modo deseado.
Selezionare la modalità desiderata.
Wählen Sie die gewünschte Betriebsart
aus.
AIR SWING
AUTO 123
Inverter/Heat-pump
model
AUTO
HEAT
COOL FAN
Cooling model
AUTO FAN
OFF / ON
DRY
CZ-RD513C
TIMER/CLOCK
MODE
Seleccione o modo de funcionamento
pretendido.
TEMP/
A/C No.
FAN
SPEED
UP
SET
MODE
UP
Selecteer de gewenste stand.
SELECT DOWN CANCEL
DOWN
AUTO MANUAL
AIR SWING
DRY COOL
ECONOMY
CHECK ODOUR WASH
VENTILATION TEST RUN FILTER RESET
Select the desired temperature.
UP
Seleccione la temperature deseada.
Selezionare la temperatura desiderata.
Stellen Sie die gewünschte Temperatur ein.
Programe a temperatura desejada.
Stel de gewenste temperatuur in.
DOWN
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Service Europe, a division of
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
Panasonic Corporation
Printed in Malaysia
OSTH0806-02
F566077
Download from Www.Somanuals.com. All Manuals Search And Download.
|