USER MANUAL
3415DVD
34cm TV / DVD Combination
TV
+
DVD
Please read this manual carefully before using
this TV set and keep it for future reference.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety and Precautions
To ensure safe and reliable operation of the TV set, please observe the following precautions, operation and maintenance.
Attention:
1. Pay attention to the power supply cord before installing the TV set. Do not hang anything on the cord,
and avoid treading on the cord.
2. The slots on the housing are designed for ventilation to ensure reliable operation of the TV set and prevent
overheating. They must never be blocked. The TV set must not be placed near a heat source or it
might be damaged.
3. The outdoor antenna must not be erected close to HV lines or other power supply lines. Use extreme care when
erecting the antenna and don't touch live wires or injury may occur.
4 This TV set can only use the supply voltage and frequency indicated on the back of the housing. If you power
supply does not comply with them, please consult with service personnel.
5. Don not let any object fall into the ventilation openings of the TV set housing, nor let any liquid flow into the
machine via the openings
6. Do no not subject the TV set to rain, or use in a damp environment. When cleaning dust, be sure to remove the
power supply plug from the socket first. Don not clean the housing directly with liquid detergent, use a damp cloth.
Be sure to remove the power supply plug from its socket and remove the antenna plug during a thunderstorm or
when it will not be use for a long time, to avoid components being damaged by lightning.
7. if you use an indoor antenna, do not let it touch any electrical appliance, or normal reception of TV programs
mat be affected.
Safety:
1. Do not remove the back of the housing yourself, as high voltage inside the unit are dangerous. If it is
necessary to open the back, ask a technician with specialised service experience.
2. Remove the power supply plug from its socket in case of the following conditions, and consult with service
personnel.
(1) The power cord or plug are damaged or show cracks.
(2) Any object has fallen into or liquid flown into TV set.
(3) The performance of the TV set has deteriorated significantly or there is damage on the housing.
(4) The TV set will not operate normally according to the instruction.
3. Please remove the power supply plug from its socket when the TV set will not be used for a long period of
time.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in hazardous
radiation exposure.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICING PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "Dangerous Voltage" within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
This appliance has a serial number on the rear
panel. Please record the serial number and
retain it for your records.
Serial Number ...............................................
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1. First read carefully the relevant instructions in "Safety and Precaution".
2. place the TV set in a place where there in no direct sunlight on it. Any light reflecting from the screen will cause fatigue
of your eyes.
3. Use gentle indirect lighting for comfortable watching. The best distance of watching is 5~7 times the screen height.
4. Keep a space of 10cm or over between the TV set and wall for good ventilation.
5. Never put the TV set in a place with excessive temperature or moisture, to avoid damage or failure of its components.
Automatic demagnetising
A colour TV set is likely to be affected by magnetic fields causing colour distortion. If the TV set is moved while on, turned
or affected by a magnetic object nearby, turn off the power and wait for at least 1 hour before you turn it on. That is to
ensure that the automatic demagnetising circuit will operate eliminating adverse effects of magnetism an colour purity.
Antenna Connection
Parallel flat cable
(300 )
Impedance adaptor
(300 - 75 )
Antenna input
(75 )
For good reception use an outdoor antenna. The recommended type and location of antenna varies between different areas.
Notes:
1. Connect the outdoor antenna as shown above.
2. It is suggested to use a 75 coaxial cable to eliminate
interference or noise.
3. The cable must not be tied together with supply cords
Preparing the remote controller
1. Remove the battery cover of remote controller.
2. Load two AA type batteries into the chamber observing the correct polarity.
Precaution operating the remote controller
1. Direct the remote controller to the infrared receiver window of the TV set
2. Do not press the keys on the remote controller continuously.
3. If the remote controller will not be used for long time or if the batteries have
depleted, please remove them to prevent leaking.
4. Never throw batteries into fire and properly dispose of the used batteries.
5. Take care not to drop, damp or dismantle the remote controller.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Buttons and External Sockets
Front panel of the TV set
Rear panel of the TV set
Video input terminal
Video output terminal
Antenna/ CATV input socket
Audio left channel output terminal
Audio left channel input terminal
Audio right channel input terminal
COAXIAL
Coaxial terminal
Audio right channel output terminal
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons on the remote control
Stand By
POWER
OPEN/CLOSE
DVD Open/close
Scan
SCAN
SWAP
CALL
MUTE
Former Program
Mute
1
5
2
6
0
3
7
4
Call Screen Display
Program Number
TV/AV Exchange
Digital Selector
H.LOCK
8
TV/AV
-/--
9
H.LOCK
TV/DVD
TV/AV DVD
Volume/Channel Selection
MENU
MENU
Exit Screen Mode
Picture Mode
Calendar
EXIT
CALENDAR TIME
P.STD
(Not Available)
Time
REV
FWD
PREV
NEXT
10+
(Not Available)
DVD PREVIOUS
DVD NEXT
STOP
SETUP PAUSE/STEP
REPEAT
A-B
D.MENU
DVD FAST FORWARD
DVD FAST REVERSE
DVD STOP
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC SEARCH
10+
AUDIO
PROGRAM
ZOOM
DVD SETUP
UP
DVD PAUSE/STEP
D.CALL
CAPTION
LEFT
RIGHT
DVD MENU
DVD A-B REPEAT
DOWN
DVD Cursor Move button
DVD REPEAT
DVD PLAY/ENTER
DVD SLOW
DVD ANGLE
DVD SEARCH
DVD AUDIO
DVD TITLE
ZOOM
DVD PROGRAM
DVD CALL
DVD CAPTION (SUBTITLE)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching On/Off the TV Set
This section explains the use of the power button and remote handset
to turn your unit on and off.
Switching on/ off the TV set
Switching on/off the TV set
1 Press the Power switch on the The power
indicator will light.
2 If the indicator "RED" press the button
on the remote control. Alternatively you
can turn the TV on with P+ or P- buttons
if the "Child lock is not set.
Note:
1 To turn the sett off to "Standby" press
button on the remote control
4
AUTO
BG
POWER
2 To turn off the TV fully, press the Power button
and release.
Auto switch-off function
Should the signal input from the aerial be
interrupted for more than 5 minutes, the TV
will automatically switch to "Standby".
If the TV is in A/V mode or the "background"
is set to off (see page18), the set will not
switch to standby.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
You can watch a TV program on a channel which has been tuned to a broadcast.
Watching TV programs
How to select a TV program
Select the desired programs
1 Using number buttons
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers between 10 ~ 99 press [-/--] button
and enter the two digit channel number.
1
5
9
2
6
0
3
7
4
8
To select channel numbers between 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
.
2 Using the P+/- buttons
Press the P+ button to increase channel number.
Press the P- button to decrease channel number.
P+
Select the desired sound
MENU
V-
V+
Press the V-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~100. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
P-
How to select the menu
Press the MENU button and
the menus will appear at the
bottom of the screen. The
PlC icon will initially be
P+
MENU
V-
V+
flashing. Each subsequent
press of the menu button
will highlight SOU (sound),
FUN (function), TUN
P-
FUN
PIC
SOU
TUN
(tuning) icons respectively.
Press the P-button to display
the appropriate menu. Press EXIT to exit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV (continued)
Press the SWAP button to select the channel you were watching previously.
Auto scan function scans through all programs in memory including those with
"skip" set to "off" (see "Program skip" on page 12).
Program swap and auto scan functions
Program swap
Press the SWAP button to
select the channel you were
watching previously.
18
AUTO
BG
SWAP
8
AUTO
BG
18
AUTO
BG
Auto program scan
1
SCAN
1 Press the SCAN button to
scan through all the memorised
TV programs. The scan will
pause for a bout 2 seconds on
each channel.
AUTO
BG
SCAN
2
BROWSE
3
BROWSE
1
AUTO
BG
BROWSE
2 If you want to stop the
function during auto tuning,
simply press the SCAN button
again.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channels
This TV set has three methods to set the channels, which are respectively full
automatic, semi automatic and manual fine tune.
In this section, how to use the remote control to set the channel is explained. You
can also use the buttons on the TV set to set channel.
Full automatic mode
Automatic search
1 Press the MENU button. The
MAIN MENU will appear with the
TUN
PlC (picture) icon flashing. Press
the MENU button a further 3 times
until the TUN (tuning) icon is
flashing. Press P- to enter the
TUNING menu.
PROG NO
ORGANISE
SEARCH
FINE TUNE
AUTO SEARCH
P+
MENU
V-
V+
P-
2 Press the P+/- buttons to
select "AUTO SEARCH".
TUN
PROG NO
ORGANISE
SEARCH
FINE TUNE
AUTO SEARCH
3 Press the V+ button to start
AUTO search. All channels will
be stored in the order they are
received. After the search has
finished, the first channel
6
P+
received will be displayed.
AUTO SEARCH
152.25MHz
Please see page 20 (Organise).
MENU
V-
V+
P-
Display function
CALL
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
3
AUTO
BG
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channels (continued)
Semi-automatic search
Semi-automatic search
1 Press the P+/- buttons or the.
PROGRAMME NUMBER (0-9)
to choose the desired channel
1
AUTO
BG
P+
(e.g. Channel 1).
MENU
V-
V+
2 Press the MENU button. The MAIN MENU will appear
with the PlC (picture) icon flashing. Press the MENU button
a further 3 times until the TUN (tuning) icon is flashing.
Press P-to enter the TUNING menu.
P-
3 Press the P+/- buttons to
select "SEARCH".
TUN
PROG NO
ORGANISE
SEARCH
FINE TUNE
AUTO SEARCH
P+
4 Press the V-/ V+ button to
start search.
MENU
V-
V+
Press the V- to search down
the scale and the V+ to search
up the scale.
P-
6
SEARCH
152.25MHz
To turn off the on-screen menu
In general, after you press the MENU button, the menu
item display (PlC, SOU, FUN, TUN) will automatically
disappear within 30 seconds. If you want to eliminate
these contents immediately, please press the
EXIT button.
EXIT
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channels (continued)
Manual fine tune
Manual fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
1
1 Press the P+/- buttons or
PROGRAM NUMBER (0-9)
button to choose the desired
channel (e.g. channel 1).
AUTO
BG
P+
2 Press the MENU button. The MAIN MENU will appear
with the PlC (picture) icon flashing. Press the MENU
button a further 3 times until the TUN (tuning) icon is
flashing. Press P- to enter the TUNING menu.
MENU
V-
V+
P-
3 Press the P+/- buttons to
TUN
select " FINE TUNE".
PROG NO
ORGANISE
SEARCH
FINE TUNE
AUTO SEARCH
4 Use the V-/+ buttons to
manually fine tune the station
5
P+
until the best picture and
sound are obtained.
MENU
V-
V+
FINE TUNE
152.25MHz
P-
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching Channels (continued)
Programme skip
Program skip
Channels can be set so that they are skipped during
program selection.
1 Press the P+/- buttons or
PROGRAM NUMBER (0-9)
button to choose the desired
channel (e.g. channel 1).
1
AUTO
BG
P+
MENU
V-
V+
P-
2 Press the MENU button. The MAIN MENU will appear
with the PlC (picture) icon flashing. Press the MENU
button a further 3 times until the TUN (tuning) icon is
flashing. Press P- to enter the TUNING menu.
3 Press the P+/- buttons to
select "SKIP".
P+
TUN
MENU
V-
V+
ON
SKIP
4 Press the V-/+ buttons to
turn the SKIP function "ON".
PROG NO
ORGANISE
SEARCH
FINE TUNE
P-
5 Press the EXIT button to close
the menu. When you use the P+/•
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
If you want to recover the skipped channel
P+
1 Use the PROGRAM NUMBER buttons to select the
channel number to be recovered.
2 Repeat steps 1-3 above.
MENU
V-
V+
3 Press the V-/+ buttons to turn the SKIP function "OFF".
P-
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Picture & Sound Control Functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
STANDARD
four preset modes and one customised mode.
Press the P.STD button to select the desired
picture quality. Five kinds of picture modes
(i.e., "STANDARD", "RICH", "USER", "LISTEN",
"SOFT") can be selected in turn.
P.STD
RICH
USER
LISTEN
SOFT
The 5 modes are
Listen - This is a new feature that blacks out
the TV screen when listening to music only channels
Soft - Designed for night time low light viewing;
Standard - Designed for rooms that have good all round
lighting;
Rich - Designed for rooms with high ambient lighting such
as daytime sport;
User - A spare setting that can be adjusted to personal
tastes.
How to customise your own picture status
1 Press the MENU button, the MAIN MENU will appear with
the PlC (picture) icon flashing. Press P- to enter the PICTURE
menu.
P+
MENU
V-
V+
PIC
P-
85
CONTRAST
BRIGHTNESS
COLOR
SHARPNESS
2 Press the P+/- buttons to select the item to adjusted, then press
the V-/+ buttons to obtain the desired effect.
ITEM
Press V -
Press V +
P+
Weak
CONTRAST
BRIGHTNESS
COLOUR
Strong
Dark
Bright
MENU
V-
V+
Shallow
Soft
Deep
SHARPNESS
*Hue
Sharp
P-
lean to purple
lean to green
Note: The "Hue" item only appears when the colour system is NTSC.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Picture & Sound Control Function (continued)
Black Stretch Automatically increases the contrast range
Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception)
Black stretch and noise reduce
How to select BLACK STRETCH
1 Press the MENU button. The
MAIN MENU will appear with the
PlC (picture) icon flashing. Press
BACKGROUND
the MENU button a further 2
ON
BLACK STRETCH
NOISE REDUCE
FADE
times until the FUN (function)
icon is flashing. Press P- to
enter the FUNCTION menu.
AVL
P+
MENU
V-
V+
2 Press the P+/- button to select "BLACK STRETCH".
Press the V-/+ buttons to turn it "ON" or "OFF".
P-
How to select NOISE REDUCE
1 Press the MENU button. The MAIN
MENU will appear with the PlC
(picture) icon flashing. Press the
MENU button a further 2 times until
P+
BACKGROUND
BLACK STRETCH
ON
NOISE REDUCE
FADE
AVL
the FUN (function) icon is flashing.
Press P- to enter the FUNCTION
MENU
V-
V+
menu.
P-
2 Press the P+/- buttons to select "NOISE REDUCE".
Press the V-/+ buttons to turn it "ON" or "OFF".
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Picture & Sound Control Functions (continued)
Mute and Fade
Sound mute
1 Press the MUTE button on the
MUTE
remote control to turn off the
sound. MUTE will appear on the
MUTE
top left of the display.
2 Press MUTE again to turn the
sound back on.
Fade
When FADE is turned on, the TV will protect the tube by
fading the picture in when the TV is switched on, and
fading the picture out when the TV is switched off.
1 Press the MENU button.
The MAIN MENU will
P+
appear with the PlC (picture)
MENU
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
V
V+
icon flashing. Press the
MENU button a further 2
times until the FUN
ON
P-
AVL
(function) icon is flashing.
Press P- to enter the
FUNCTION menu.
P+
2 Press the P+/- buttons to select FADE.
MENU
V-
V+
3 Press the V-/+ button to turn the FADE function "ON"
or "OFF".
P-
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnected from the
power supply or is turned off by the main power on
the front panel, the clock loses power and will need to
be reset when the power is reconnected.
TIME
1 Press the TIME button, and
the TIME menu appears on
the screen.
P+
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
1
--:--
0
MENU
V-
V+
2 Press the P+/- buttons select
"CLOCK", then press the V -/+
buttons to adjust the time in
hour position; press again the
P+/- buttons to select the time
in minute position, then press
the V-/+ buttons to adjust the
value of minutes.
P-
--:--
1
On/off timer On-off time setting is cleared after timer operates.
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down at a preset time.
TIME
1 Press the TIME button, and
the TIME menu display on the
screen.
TIME
CLOCK
17:18
18:00
1
--:--
0
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
2. Press the P+/- buttons to
select "ON TIME", then press
the V-/+ buttons to set the value
in hour position; press again
the P+/- buttons to select the
minute position and set the
value of the minute (take 18:00
as an example).
--:--
1
P+
MENU
V-
V+
P-
3 Press the P+/- buttons to
select "ON PROG", then press
the V-/+ or program number
buttons to select your desired
channel (take 8 as an example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
0
--:--
1
4 Repeat step 1-2 to set OFF
TIME (take 23:00 as an example).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Functions (continued)
Sleep timer and program preset
Sleep timer
TIME
The sleep timer switches the set
0
to stand-by after the sleep time
has elapsed. Sleep time can be
set in 10 minute intervals up to
180 minutes, as shown in the
illustration. Setting the sleep
10
20
170
180
time to zero turns off the sleep timer.
1 Press the TIME button, and the
TIME menu appears on the
screen.
P+
MENU
V-
V+
TIME
CLOCK
2 Press the P+/- buttons to
select "SLEEP TIMER".
17:18
18:00
8
23:00
120
--:--
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
P-
3 press the V-/+ buttons to set
the value of the SLEEP TIMER.
18
REMIND PROG function
Program remind timer, that can automatically change channel
when a program on a different channel is due to start.
1 Press the TIME button, and
TIME
the TIME menu display on the
screen.
TIME
CLOCK
ON TIME
ON PROG
2 Press the P+/- buttons to
select "REMIND TIME", then
press the V-/+ buttons to set
the value in hour position;
press again the P+/- buttons to
select the minute position, and
then set the value of the
minute (take 19:00 as an
example).
17:18
18:00
8
23:00
120
19:00
1
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
P+
3 Press the P+/- buttons to
select "REMIND PROG", then
press the V-/+ buttons or the
program direct number buttons
to set the desired channel
(take 18 as an example).
MENU
V-
V+
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIME
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
P-
19:00
18
NOTE: For REMIND PROG to
operate CHILD LOCK must be
turned off.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Functions
Screen saver and Calendar
How to start screen saver function
When the background
function is ON a bouncing
'NO SIGNAL' will be
displayed on a blue
back ground.
NO SIGNAL
P+
1 Press the MENU button. The MAIN MENU will appear
with the PlC (picture) icon flashing. Press the MENU
button a further 2 times until the FUN (function) icon is
flashing. Press P- to enter the FUNCTION menu.
MENU
V+
P-
2 Press the P+/- buttons to select
BACKGROUND. Then press
V+/- to turn the BACKGROUND
ON
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
function ON or OFF.
AVL
Calendar function
CALENDAR
1 Press the CALENDAR
button. The calendar menu
will be displayed on the
screen.
SOLAR 2001 11
14
S
M
T
W
T
F
2
S
The date on the top line is in
Year / Month / Day format.
1
3
4
5
6
7
8
9
10
11
18
25
12
19
26
13
20
14 15
21 22
16 17
23 24
P+
2 Press the P+/- buttons to highlight
the year, month or day number. Press
the V-/+ buttons to set or change
each number.
27 28
29 30
MENU
V-
V+
P-
Press EXIT or wait a minute for the calendar to disappear.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up Functions (continued)
AVL
AVL function
Automatic Volume Level control reduces the effect of
large volume changes. For instance, when
advertisements come on.
1 Press the MENU button.
The MAIN MENU will
appear with the PlC
(picture) icon flashing.
Press the MENU button
a further 2 times until the
FUN (function) icon is
flashing. Press P- to enter
the FUNCTION menu.
P+
MENU
V-
V+
BACKGROUND
ON
BLACK STRETCH
NOISE REDUCE
FADE
P-
AVL
P+
2 Press the P+/- button to
select "AVL".
MENU
V-
V+
P-
BACKGROUND
BLACK STRETCH
NOISE REDUCE
FADE
AVL
ON
P+
3 Press V-/+ button to turn the
AVL function "ON" or "OFF".
MENU
V-
V+
P-
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Organise Functions
Organise
ORGANISE
This feature enables TV programmes that may be on a wrong program
number to be moved to another number.
This feature is very useful when Automatic Search Tuning has been used
because programmes are stored in the order they are found, which is usually
not the desired order.
When organising, it is best to start from the lowest programme number first.
P+
1. Press the MENU button. The
MAIN MENU will appear with the
MENU
V-
V+
PlC icon flashing.
TUN
Press the MENU button a further 3
times until the TUN icon is flashing.
Press P- to enter the TUNING
menu.
PROG NO
ORGANISE
SEARCH
FINE TUNE
P-
AUTO SEARCH
2. Press P+ or P- buttons to
select ORGANISE.
Press V+ to enter the menu.
(For Example) If the Automatic Search function has placed SBS
on programme position 6 and you would like to move this so it
appears on programme position 1.
P+
MENU
V-
V+
3. Use P+ or P- to select "FROM".
4. Press V+ or V- to change
ORGANISE
P-
the "FORM" programme number
to 6.
FROM
TO
6
1
5. Use P+ or P- to select "TO".
6. Press V+ or V- to change
the "TO" programme number to 1.
7. Use P+ or P- to select "MOVE
CHANNEL".
P+
MOVE CHANNEL
MENU
V-
V+
8. Use V+ or V- to perform the
action.
The diagrams below explain how the ORGANISE function
affects other channels when position 6 is moved to position 1.
P-
Other programmes move
down to allow for space
Start Position
Move FROM 6. TO 1
Contents
P 01
Contents
Contents Contents
P 01
P 01
P 02 Contents
P 02 Contents
P 02 Contents
Contents
Contents
P 03
P 04
Contents
Contents
P 04
Contents
Contents
P 04
P 03
P 03
P 05 Contents
P 06 Contents
P 05
P 06
Contents
P 05 Contents
P 06 Contents
What was on programme position 6 is now on programme position 1.
All the other stored channels have now moved down 1 position so that now.
What was on programme position 1 is now on programme position 2.
What was on programme position 2 is now on programme position 3.
What was on programme position 3 is now on programme position 4.
What was on programme position 4 is now on programme position 5.
What was on programme position 5 is now on programme position 6.
Note: It needs some time to move two channels, please wait till the TV
finishes the process.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock
This TV set provides the option of locking various parts of the TV to guard
against unauthorised viewing.
Changing your Password
Changing your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
instructions below.
H.LOCK
1 Press H.LOCK button, the
screen will show as the form
on the right.
INPUT PASSWORD ----
2 Press the 0 button four times
P+
LOCK SET
and enter the menu of LOCK
setting. Press P+/- button
and move the indicator to
CHANGE PW., and press
V+ button to enter the
sub-menu of change
password.
CHANGE PW.
TUNING LOCK
PRESET PROG
AV LOCK
CHILD LOCK
MAX VOLUME
UNLOCK
OFF
1
OFF
OFF
50
MENU
V-
V+
P-
1
5
9
2
6
0
3
4
8
3 Press the PROGRAM
NUMBER (0-9) button and
input a four-digits
CHANGE PW.
NEW PASSWORD --•-
CONFIRM ----
7
password.
4 After inputting your new password, please confirm it by
keying it in again. You can now enter the lock settings using
your new password.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock (continued)
Setting the Lock
Setting the Lock
There are TUNING LOCK, AV LOCK, and CHILD LOCK,
etc, you can set it due to your needs.
H.LOCK
INPUT PASSWORD .....
1 Press the H.LOCK button,
the screen will show as the
form on the right.
1
5
9
2
3
7
4
8
2 Press the PROGRAM
NUMBER (0-9) button 0 for
four times (or input the
password you set), and enter
the LOCK menu.
LOCK SET
CHANGE PW.
TUNING LOCK
PRESET PROG
AV LOCK
CHILD LOCK
MAX VOLUME
UNLOCK
6
0
OFF
1
OFF
OFF
50
P+
3 Press P+/- button, move
the indicator to the lock function you require and press V+
or V-button to set it ON or OFF, change setting or activate it.
MENU
V-
V+
P-
Description of each lock function
1. When the TUNING LOCK is set ON, if you want to enter the
TUNING menu, you will have to type the password.
2. The PRESET PROG allows the TV to always be on the same
channel when you turn it on.
3. When AV LOCK is set ON the AV channel cannot be used, hence
the screen will indicate that AV has been locked.
4. When the CHILD LOCK is set ON, if the buttons on the TV
are pressed, the screen will indicate that the TV set is in the
status of CHILD LOCK, and the buttons won't work.
5. The MAX VOLUME allows you to set a figure for the top limit
of volume. Volume control still shows 1~100 but volume level is
scaled down.
6. The UNLOCK allows to you to set all the lock to OFF and set
the MAX VOLUME to 100.
7. If you forget your password or a password is accidentally set
enter 9443 as the password. This will enable you to regain control.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Basic Playback
Preparations
Stop playback
1. Press STOP
button to go to stop mode, the TV
Press the TV/DVD button on the remote control
or the TV to enter the DVD status.
screen will show the start logo. For some discs the
player can recall the location where stopped, such
as DVDs and audio CDs.
2. Press PLAY/ENTER to resume play-back from the
location where playback was stopped.
3. Press STOP twice to stop completely.
Play must then resumed from the title beginning.
Basic playback
1. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
Previous and Next
During Playing, pressing the PREV
key will
restart the current chapter and skip chapters
backwards with each subsequent press until the
start of the disc is reached.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Each press of NEXT
key during playing will
Some discs do not start automatically. Press
PLAY/ENTER to start playback.
skip the current chapter and play the next one.
In case of CD audio and photo discs the next
track, song or photo is reached.
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
button is pressed, the
Each time the FWD
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
Pause playback
3. Press REV
to fast reverse through the disc.
button is pressed, the
Each time the REV
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
Single step playback
To "single step" press the "Pause" button,
then press "Pause/Step" in continuous steps
to view the next frame.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Advanced Playback
IMPORTANT NOTE:
ALL DESCRIBED FUNCTIONS ARE FOR DVD DISCS. IF YOU PLAY OTHER FORMATS
THE OPERATION AND DISPLAY ON SCREEN MAY VARY.
SUBTITLE
PROGRAM
When playing discs, press "PROGRAM" to enter
program mode. Starting with program number "01"
highlighted, press the digit buttons to select the title
and chapter number that you want. When finished
move the cursor to select "START". This will start
the program playback.
Press " SUBTITLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages
displayed on screen.
SEARCH
REPEAT
Press "SEARCH" once to display Disc Go To --:--,
use numeric key to enter the desired time of Disc.
Press " SEARCH " twice to display Track Go To --:--,
use numeric keys to enter the desired time of track.
Press " SEARCH " 3 times to display Select Track
--/03, use numeric keys to enter the desired track.
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press "A-B" to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
Press PLAY/ENTER to resume normal playback;
ANGLE
Note: This function is invalid for CD.
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles, for example, front, side, whole view
and exterior scene).
TITLE/PBC
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
AUDIO
D.MENU
Press this key can change the mode of audio.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this button to cycle between Mono Left, Mono
Right, Mix-Mono and Stereo.
Press this key to display root menu, select item
according to your preference. (This function will work
with a DVD having a multi-layer menu.)
Note: Do not press this button continuously.
Each press must have a 3 second delay.
D.CALL
Pressing this key will cycle through "title elapsed",
"title remain", "chapter elapsed", "chapter remain"
and "display off ". Each displays the appropriate
time information.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Function Playback
JPEG DISC PLAYBACK
Users can record pictures from digital camera or scanner onto a CD-R or CD-RW disc using a
personal computer, CD recording drive and suitable software. Be sure to use good quality
recordable discs and trustworthy software with good instructions. Take care with recording
settings: the disc must be recorded as data disc IS09660 format, short file names (8
characters) are best, no multi-session and must be "finalised".
JPEG disc contains pictures in a compact file format which can be decoded by the DVD
player and output for viewing and enjoyment on the television screen.
When a disc containing standard JPEG picture files is inserted into the player, a navigation
menu will be displayed automatically. Use the UP and DOWN cursor buttons to select a file
then press PLAY/ENTER. The slide show will commence. Press PREVIOUS or NEXT to move
between pictures. Press pause to stop on the current picture. Press PLAY/ENTER to resume
normal playing.
Press D.MENU to go back to folder and file view.
In the navigation menu you can open folders containing files by moving the highlight onto
them with the UP and down buttons, then pressing PLAY/ENTER.
Program button changes between folder and file list.
Some repeat functions can be used (see MP3 play).
Zoom functions are not included.
SCREEN SAVER FUNCTION
This unit employs a screen saver mode to help protect the tube during static video
pictures. This can be turned off on the GENERAL SETUP PAGE (see Pg. 27)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
DVD System Setup
General Setup Process
SETUP
1. Press the SETUP button, the
General Setup Page, Preference
Page will be displayed in turn.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB 4: 3:Ps
On 4: 3:Lb
ENG 16: 9
2. Press or to select the
item, then press to enter the
submenu.
On
..Preference Page..
PLAY/ENTER
PAL
AUTO
NTSC
TV Type Auto
Parental
3. Press or to setup, then
press PLAY/ENTER to confirm.
Password
Default
4. Press EXIT key or press SETUP
repeatedly to exit the set-up
menus.
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal
TV, select 4:3/LB.
The following information applies
only when the DVD output is
connected to an external TV.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB 4: 3:Ps
On 4: 3:Lb
ENG 16: 9
SETUP
On
4:3/PS (PS = Pan and Scan)
Screen Saver Off
You may select if you have a normal aspect
ratio (4:3) TV, although the 4:3/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4:3/LB (LB = Letter Box)
PLAY/ENTER
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16:9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup (continued)
DVD System Setup
General Setup Page
..General Setup Page..
ANGLE MARK: Users can select a particular
camera angle when playing a DVD which offers
multiple angles.
This item allows you to set Angle Mark ON or OFF.
TV Display
Angle Mark
OSD Lang
Spdif Output
LB
On
On
Off
ENG
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
On
On Screen Display (OSD) Language: Users
can select on-screen display language.
English
France
ENG
On
Screen Saver Off
SPDlF OUTPUT MODE: Sets the audio outputs.
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is output through the
back-panel connections for 2-CH audio out or 5.1 CH audio out.
2. SPDlF/RAW or SPDIF/PCM: This
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
On
ENG
Spdif Off
surround sound format is output to a Dolby Digital/DTS decoder
through the coaxial connector on the back panel of the product.
On
Spdif: Raw
Spdif: Pcm
Screen Saver Off
CAPTIONS: This function allows you to display or hide the caption.
..General Setup Page..
TV Display
LB
Angle Mark
OSD Lang
Spdif Output
Captions
On
ENG
On
On
Off
Screen Saver Off
SCREEN SAVER: If the screen saver is on, then there
will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
On
ENG
On
Screen Saver Off
On
Off
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup (continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discs which are inserted and played.
SETUP
TV TYPE: This player
supports different TV output,
including MULTI (Auto),
NTSC, and PAL systems.
Usually please set to MULTI.
..Preference Page..
PAL
TV Type Auto
Default
AUTO
NTSC
PLAY/ENTER
DEFAULT: Resets all settings
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
SETUP
..Preference Page..
TV Type Auto
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the type of disc.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play discs of non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc is depend on the way the disc is prepared.
- see under "Special function playback - JPEG disc playback".
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Protection and DVD Characteristics
ON HANDLING DISCS
ON STORING DISCS
Do not touch the playback side of the disc.
Do not attach paper or tape to disc.
Do not store discs in a place subject to direct
sunlight or near heat source.
Do not store discs in place subject to moisture
and dust such as bathroom or near humidifier.
Store discs vertically in a case. Stacking or
placing object on discs outside of their case may
cause warping.
Playback side
ON CLEANING DISCS
STRUCTURE OF DISC CONTENTS
Fingerprints and dust on the disc cause picture
and sound deterioration. Wipe the disc from the
centre outwards with a soft cloth. Always keep
the disc clean.
Normally, DVD discs are divided into titles, and the
titles are sub-divided into chapters. Audio CD are
divided into tracks
If you can not wipe off dust with a soft cloth,
wipe the disc lightly with a slightly moistened soft
cloth and finish with a dry cloth.
Do not use any type of solvent such a thinner,
benzene, commercially available cleaners or anti-
static spray for vinyl LPs. It may damage the disc.
Compare DVD disc with other discs:
DVD
LD
SVCD
Digital
VCD
CD
Encode
Digital/
MPEG I
Digital/MPEG
method
Analog
Digital
Single- Double Single- Double-
side
-side
side
side
650MB
650MB
650MB
Capacity
single-
layer
4.7G
single double- double-
-layer layer
8.5G
layer
17G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
242
266
484
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
minutes minutes minutes minutes
12cm/8cm
30cm/20cm
12cm
12cm
12cm/8cm
Horizontal
resolution
No more than
430 line
No more than No more than
More than 500 line
350 line
250 line
Picture
proportion
One kind
One kind
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
4 kinds
at most
4 kinds
at most
Language
2 kinds
2 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV Set to Other Video & Audio Equipment
Connection of AV input/output terminal
The figure below shows how to connect external equipment using AV signals.
an additional TV
DVD, VCD or other units
VHF
UHF
OUT
IN
Video output
VIDEO
L
COAXIAL
AUDIO
R
Laser DVD with output terminal
DVD, VCD or other units
There is also an AV input on the side of your television. Use the Left Audio input (white terminal on
the TV), if you are connecting equipment with mono sound. The MONO sound will be delivered by
both left and right speakers.
DVD player
VIDEO
L - AUDIO - R
VCR
Video output
Audio left output
Audio right output
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
The aerial direction and connection
Noise
Picture with snow
This is called ghosting which can be minimised
with an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimise this effect.
Double or Triple Image
Normal
Noise
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Disturb
Volume Sound mute
Normal
No sound
No sound
Ensure that the power supply is connected to
the TV set and turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
No Picture
Adjust colour control
Adjust channel again
No colour
Scramble
Normal volume
Normal or Weak Volume
Colour Purity fault which can be caused by moving the
TV set, placing magnets near the TV screen or turning
on/off house hold appliances such as vacuum cleaners
near the TV set. Turn the TV off with the mains power
switch for 15 minutes. When the power is turn on again
the TV set will automatically demagnetise the screen.
In severe cases you may need to repeat this process.
Colour Spot
Normal volume
Note:
1. If the fault can not be repaired using the above guide consult with your local authorised service
centre. The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.
2. The cabinet may produce the occasional "snapping sound". This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
3415VD
PAL, NTSC PLAYBACK
BG
M o d e l
Colour system
Sound system
Picture tube
34cm colour picture tube
2X2W (10% THD)
Sound output power
AC 240V ~ 50Hz
Power requirements
Power consumption
70W
Dimension
356 (Width) x 370 (Depth) x 367 (Height) mm
Remote control
Owner's manual
Battery (AAA)
X1
X1
X2
Accessories
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
01
0090504837
Download from Www.Somanuals.com. All Manuals Search And Download.
|