OWNER'S MANUAL
34CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 3425G
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4163
Standards Australia
APP No: N15957
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
(continued)
Contents
Channel Selection ...................................................................................................
Adjusting Picture .....................................................................................................
Sound Control .........................................................................................................
Clock Setting ...........................................................................................................
Setting Sleep Timer ........................................................................................
Setting Timer ...................................................................................................
Setting Time Off ..............................................................................................
Setting Time On ..............................................................................................
Setting Alarm Channel ....................................................................................
System Setting ........................................................................................................
Selecting OSD language .................................................................................
Calendar setting ..............................................................................................
Hotel mode .....................................................................................................
Child lock ........................................................................................................
Playing game ..................................................................................................
Teletext ...........................................................................................................
15
16
17
18
18
18
18
19
19
20
20
20
20
21
21
22
23
24
Troubleshooting Guide ............................................................................................
Specifications ...........................................................................................................
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Features
Hyperband
255 preset channels
Automatic channel preset
Full function remote control
Multi OSD language
AV input terminals
Clock/Game/Calendar
Digital AFT technology
Four picture modes
ON timer/OFF timer
TELETEXT
Hotel lock
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Cautions
Safety Cautions
When any unusual situation occurs, turn off the
power supply at once and remove the plug from the
wall outlet. Contact a qualified service department in
your local area.
1
2
Do not expose the TV set to rain or excessive
moisture. Avoid using the set in very warm or
damp places and never use it in a bathroom.
3
When cleaning dust off the picture tube disconnect
the power first. You can wipe lightly with a piece of
dry, clean and soft cloth.
4
Avoid exposing the set to direct sunlight and other
sources of heat to prevent damage to the cabinet
and components.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
!
This TV set can operate on an AC power of 240V, 50HZ. You must not use a
power supply of any other type.
5
High voltage exists in this TV set. Do not remove the
cover
6
Do not cover the ventilating hole in the cabinet
Keep a space of more than 5cm from the walls to the
TV set to ensure adequate ventilation.
7
If the power cord or the plug is damaged contact a
qualified service department for service.
8
When the TV set is to be left unattended for a long
period of time, turn off the power supply and remove
the plug from the wall outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls
Front/Back view
Front
1. :Earphone Jack
AV input terminals (VIDEO, AUDIO L/MONO, R)
2. MENU button: To enter into menu operation.
3. AV/TV button: Video input select.
4. VOL- button: volume down adjust; menu item adjust.
5. VOL+ button: volume up adjust; menu item adjust.
6. CH- button: channel down select; menu item select.
7. CH+ button: channel up select; menu item select.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Back
!
IMPORTANT notes on the AV input terminals
Please do not use the front and rear input terminals at the same time
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Identification of Controls
Remote Controller
(continued)
!
Notes:
In most cases, the function of
buttons are equal to the CH+/- buttons, and the function of
buttons are
/
equal to the VOL+/- buttons; but in TELETEXT operation, the
,
,
,
buttons only serve as teletext control keys.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective range of the Remote
Installing batteries
1
Open the battery cover.
2
Install two "AAA" batteries
matching the +/- polarities
of the battery to the +/-
marks inside the battery
compartment.
3
! Notes:
Replace the battery cover.
When there is an obstacle between the TV and the
transmitter, the transmitter may not operate.
When direct sunlight, and incandescent lamp,
fluorescent lamp or any other strong light shines on
the REMOTE SENSOR of the TV the remote operation
may be unstable.
!
Notes:
The battery life should be about one year under normal
use. Do not try to recharge batteries not intended to be
recharged.
Use only the size and type of batteries specified. Do not mix
different types of batteries together or old batteries with
fresh ones.
When the remote control will not be used for a long period
of time or when the batteries are worn out, remove the
batteries.
Do not throw the batteries into a fire. Dispose of used
batteries in the specified manner.
Do not drop, dampen or disassemble the remote control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on
the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Antenna Installation/Connect to video and audio equipment
Antenna installation
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be
used. The exact type and position of the aerial will depend upon your particular area.
Notes:
!
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur
due to radio wave conditions.
The aerial cable should not be bundled with the power cord and the like.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect to video and audio equipment
This TV set provides AV input terminals for your convenient connection to VTR, DVD or video
camera to enjoy the high quality picture.
Please refer to the owner's manual of the equipment to be connected as well.
Important notes on the AV input terminals
Please do not connect and use the front and rear input terminals at the same time.
You can also use the AV terminals on the TV set rear as follows.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Turning on/off
Turning on/off
Turning on
Press the Power Switch on the TV set.
1
If no picture appears, then the TV set is in STANDBY mode.
Now please follow step 2.
In STANDBY mode, press the button on the
remote controller and the TV set is turned on.
2
3
!
In STANDBY mode, you can also press the
AV/TV button on the set to turn on.
Notes:
If there is no input signal, then a blueback appears. After 15
minutes, the set auto goes to STANDBY.
Turning off
Press the Power Switch on the TV set if you want
1 to cut off the power completely.
If you want to turn off the TV set temporarily,
press the button on the remote controller.
2
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Select Input Signal
Select input signal
Select input signal
Press AV/TV button on the TV set or AV button
on the remote control.
1
When the set is in TV mode, press this button and the set goes
to AV mode. Now you could watch video program from AV
input terminals.
If you want to switch to TV press AV button again or follow
step 2, 3 or 4.
Press digit buttons to switch back to TV mode.
2
3
4
Press CH+ or CH- button to switch back to TV
mode.
Press
button to switch back to TV mode.
5
Press DSP button, the set displays current
input mode.
The OSD disappears in about 5
seconds.
18:09
19
!
Notes:
If the Timer item has been set,
the current time also appears.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Press MENU button four times to call Program
menu page.
1
2
3
Press CH+ or CH- buttons to select item.
Press VOL+ or VOL- buttons to adjust item.
Tuning in
Auto search/Manual search/Channel skip/Fine tuning
Auto Search
Press MENU button repeatedly to enter into
Program menu page.
Press CH+ or CH- button repeatedly to select
Auto Search item.
1
2
3
Press VOL+ button to start Auto Search towards
higher frequency; or press VOL- button to start
Auto Search towards lower frequency.
All active channels will be preset and stored into the memory
automatically. After presetting, the TV will stop at the last channel
program.
!
Notes:
Before you start Auto Search, we strongly recommend you to set
a proper Sound System according to your local area. Please
refer to the steps of Sound System setting on page 14.
During the process of AUTO SEARCH, pressing the MENU or
CH+/- buttons will stop the process.
1.
2.
Manual Search
Use MANUAL SEARCH function if desired channels cannot be preset or if
you would like to preset channels to specific position numbers one by one.
Press MENU button repeatedly to enter into
Program menu page.
1
Press CH+ or CH- button repeatedly to select
Channel Number item.
2
Press VOL+ or VOL- button to select a channel
number (ranging from 0-254).
3
Press CH+ or CH- button repeatedly to select
Manual Search item.
4
5
Press VOL+ or VOL-button to start program
search manually.
Pressing VOL+ the set searches towards higher frequency;
Pressing VOL-, the set searches towards lower frequency;
The search stops when a program found and this program will
be stored in the specified position number.
!
Notes:
1.
The skipped channels can not be selected by VOL+/- buttons in step 3, then you should use digit
buttons to select the skipped channels first and execute steps 1, 4 and 5 above.
2. You can use Band selection to quicken search process if you know which band your desired
program locates in. The band switches among VHF-L, VHF-H and UHF.
3.
Repeat the above steps if you want to store another program in other position number.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Skip/Fine tuning
Skip an unnecessary channel
Press MENU button repeatedly to enter into
Program menu page.
1
Press CH+ or CH- button repeatedly to select
Channel Number item.
2
3
4
Press VOL+ or VOL- button to set a channel
number (for example, channel 99).
Press CH+ or CH- button
repeatedly to select
Channel Skip.
Press VOL+ or VOL-
button to set to On.
5
Now channel 99 will be skipped
when you browse channels by
CH+ or CH- button.
To restore a skipped channel, please use digit buttons to
select the skipped channel, then repeat the above steps 1, 4
and 5 and set the Channel Skip item to Off.
Fine tuning
Fine tuning is not necessary under normal conditions. However, in
area of inferior broadcast conditions where adjustment is
necessary for a better picture and sound, use Fine tuning.
Press MENU button repeatedly to enter into
Program menu page.
1
Press CH+ or CH- button repeatedly to select
Channel Number item.
2
Press VOL+ or VOL- button to set a channel number
you want to fine-tune (for example, channel 99).
3
Press CH+ or CH- button
repeatedly to select Fine.
4
Press and hold VOL+ or
5
VOL- button till the best
possible picture and
sound are obtained.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Tuning in
(Continued)
Colour System/Sound System Selection
Setting Colour System
If the picture colour is abnormal, maybe the colour system setting is
wrong. Then you can select a proper colour system as follows.
Press MENU button repeatedly to enter into
1 Program menu page.
Press VOL+or VOL-
2 button to select a proper
colour system.
Setting Sound System
If the sound is abnormal, maybe the sound system setting is wrong.
Then you can select a proper sound system as follows.
Press MENU button repeatedly to enter into
Program menu page.
1
Press CH- button to select Sound System item.
2
Press VOL+ or VOL-
button to select a proper
sound system.
3
Some models are with only one
sound system and in this case
the Sound System does not need
to be adjusted.
Program
Color System
Notes:
!
AUTO
When the set is in AV mode, only
Colour System appears in
Program menu page.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Channel Selection
Channel Selection
Use Direct Channel Selector (0-9 and -/-- buttons)
To select one-digit channel:
1
Press 0-9 direct
channel selector.
Press -/-- button
repeatedly to
display "-".
8
To select two-digit channel:
Press 0-9
buttons.
Press -/-- button
repeatedly to
display "--".
Press 1-9
buttons.
18
-1
--
To select three-digit channel:
Press -/-- button
repeatedly to
display "--"
-- 1
---
-16
168
Press 1-2
buttons.
Press 0-9
buttons.
Press 0-9
buttons.
!
Notes:
The maximum channel number is 254, the set does not act if the
channel number you input is out of the range of 0~254.
Use CH+ or CH- button
2
3
Press CH+ button, the channel number increases;
Press CH- button, the channel number decreases.
Use previous channel
button
Press this button to switch between the current channel
and previous channel.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Adjusting Picture
Contrast/Colour/Brightness/Sharpness/Picture Mode
Adjusting Picture
Press MENU button, the Picture menu page
displays.
1
2
Press CH+ or CH- button to select item.
Press VOL+ or VOL- button to adjust.
3
4
VOL-
weaker
paler
Item
Contrast
Color
VOL+
stronger
deeper
Brightness
Sharpness
Tint*
darker
softer
purplish
lighter
sharper
greenish
* Note: The item TINT is for NTSC only.
The adjusted settings are stored in the user-set mode.
There are three preset picture modes and one user-set
|
picture mode. Press the
button to select a picture
mode according to your favourites.
|
Press
button to select picture mode.
Picture mode
Item
Soft
50
50
30
50
Standard
Vivid
100
50
Contrast
Color
Brightness
Sharpness
80
50
50
50
50
80
50
50
Tint
50
! Notes:
The above parameters maybe different in different
models.
In the user-set picture mode you
can adjust picture according to
your favourites.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Sound Control
Adjusting Volume/Muting the Sound
Use VOL+ or VOL- button.
1
2
Press VOL+ button, the volume increases;
Press VOL- button, the volume decreases.
The minimum volume is 0 and the maximum volume is 100.
Use MUTE
button.
If you want to mute the sound,
press button on the remote.
To resume the sound, press this
button again.
!
Notes:
You can also resume the sound by pressing VOL+ or VOL-
button.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Clock Setting
Sleep Timer/Timer/Time Off
Setting Sleep Time
Press MENU button repeatedly to enter into
Clock menu page.
1
2
Press VOL+ or VOL- button to set sleep time.
The sleep time switches among Off, 10, 20, 30, 40, 50 and 60
minutes. When the time is up the set auto goes to STANDBY.
You can also use Sleep
button to set the sleep time
quickly.
Setting Time
Press MENU button repeatedly to enter into
Clock menu page.
1
2
3
!
Press CH- button to select Timer item.
Press VOL+ or VOL-
button to set current time.
Clock
Sleep
30
Timer
00:10
- -:- -
- -:- -
Time Off
Time On
Notes:
The Time Off and Time On items are
available only after you finish setting
the Timer item.
Setting Time off
Press MENU button repeatedly to enter into
Clock menu page.
1
Press CH- button twice to select Time Off item.
2
3
Press VOL+ or VOL-
button to set a Off time.
Clock
Sleep
Timer
Time Off
Time On
00:10
00:30
- -
The set auto goes to STANDBY
when the Off time elapses.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Time On/ Alarm Channel
Setting Time On
Press MENU button repeatedly to enter into
Clock menu page.
1
2
Press CH- button repeatedly to select Time On
item.
Press VOL+ or VOL- button to set On time.
3
After you finish setting Time On item, press the STANDBY
button on the remote control. Then the TV set auto turns on
when your preset time elapses.
!
Notes:
The Alarm Channel item is available only after you finish setting
Time On item.
Setting Alarm Channel
Press MENU button repeatedly to enter into
Clock menu page.
1
Press CH- button repeatedly to select Alarm
Channel item.
2
3
Press VOL+ or VOL-
button to select a channel
Clock
Sleep
30
Timer
00 : 10
00: 30
07: 00
number.
Time Off
Time On
Alarm Channel 99
When the preset On Time elapses,
the set auto turns on and goes to
the channel set on the Alarm
Channel item.
!
Notes:
1. When you adjust time by VOL+ or VOL- button, the increasing/
decreasing step of time is 1 minute in every press. If you press and
hold the button for more than 1 second, the step of time is 1 hour.
2. Once the functions of Time On or Time Off fulfil, you need to set
the On Time or Off Time again if you want to use this function next
time.
3. After you finish setting Time Off item, if the set auto goes to
STANDBY because there is no signal input for a continuous 15
minutes, or if you turn off manually, then the preset Off Time will be
cancelled. As the same way, turn on the set in advance will cancel
the Time On and Alarm Channel settings.
4. Once you turn off the set by press the Power Switch, all settings
in the Clock menu page will be cancelled in next time's turning on.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
System Setting
Select OSD Language/Calendar/Hotel mode
Selecting OSD language
There are multi OSD languages in this TV set provided for
you to select:
Press MENU button twice to enter into Preset
menu page.
1
2
Press VOL+ or VOL- button to select OSD
language.
Calendar setting
Press CAL (calendar) button on
the remote controller to display
calendar.
You can adjust month by VOL+/-
buttons and year by CH+/- buttons.
Hotel mode
The TV set provides Hotel mode lock or unlock function.
When the Hotel is in lock mode, the Program menu page
will be shielded and the maximum volume is 60. The
limitation of these functions is especially useful in hotel or
when you do not let other user change your settings in
Program menu.
To enter into Control menu page
|
A. Press Picture mode
button and
picture mode icon displays.
B. Before the icon disappear,
continue to press 4, 3, 2, 1 on the
remote control.
Control
Hotel Lock
Child Lock
off
off
C. Press VOL+ or VOL- button to
switch between Off and On.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Child Lock/Game
Child Lock
Firstly, please refer to the Hotel mode on the previous page to enter into the Control menu
page. Press CH - button to select Child Lock item and then press VOL+ or VOL- button to
switch between On or Off. When the Child Lock is set to On, all programs will be shielded and
the screen is black.
Playing Game
Press GAME button to enter
Box Man
1 into Game menu page.
Map
5
Game start
Press VOL+ or VOL- button
to select a map.
2
Press CH- to select Game
Start item.
3
4
Press VOL+ or VOL- button to start game.
How to play the name?
Description of icons:
:the man you control.
:the box to push.
:the destination to push the box to.
:the wall.
The player should control the man to push the box (just
push, not pull) to the destinations within the wall by using
CH+ CH-, VOL+ and VOL- buttons. When you push all
boxes to the relevant destinations then you win and it goes
to next map.
You can press UNDO button to cancel your last action.
Press GAME button to exit game. If you want to play again
then press GAME button again.
!
Notes:
1. You can not pull the box, but push it.
2. If there is wall in front of the box, you can not push it.
3. If there are two continual boxes, you can not push them.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Teletext
Teletext is an optional function, therefore only a set with the teletext system can receive the teletext
broadcast.
Switch on/off/Description of TELETEXT/Button Introduction
Switching Teletext on/off
Press the TEXT button to switch on teletext. The initial page or
last selected page appears on the screen.
To switch off teletext, press the TEXT button repeatedly until the
Teletext disappears.
Description of Teletext
Teletext is a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, television
programs, share prices and many other topics.
The thing to remember about Teletext is that it is slow. It is the
nature of the system itself, where a large amount of information
is sent using a small fraction of the TV signal. If you get yourself
into trouble, read the following instruction carefully. It may have
your answer.
Teletext is controlled through the remote controller.
Button introduction
1. TEXT
Press the button to bring the set from TV mode to Teletext mode.
Press it again to get mixed mode which superimpose the text on
a TV picture. Press it once more to resume TV mode.
2. UPDATE
Press the button to view the updated teletext page.
Display the TV picture on the screen while waiting for the new
teletext page. The characters "???" will appear at the top of left
corner of the screen. Then you can input a desired page number. When the update page is available, then
the characters "???"will change to the page number.
3. REVEAL
Press this button to display concealed information, such as solutions of riddles or puzzles. Press again to
remove the information from the display.
4. HOLD
When a Teletext page has sub-pages the screen will change automatically to display the next sub-page
when it comes around. This button freezes the page on screen to prevent this.
To release the page press HOLD again.
Sub-page may be identified by a number such as "2/3" on the page itself. The "2/3" means that the page on
screen is sub-page 2 of a 3 page set.
5. SIZE
Press the button to expand the top half of the display. Press it again to expand the bottom half of the display.
Press it once more to resume normal size.
6. RED/GREEN/YELLOW/BLUE ( /
/
/
) buttons
These four colour-coded buttons control a memory that allows instant access to selected page number.
7. INDEX
Press this button to select index page.
8. SUBPAGE
Select the Teletext alarm page or Teletext subpage. Press the button, the "S****" will be displayed on the
screen. Now enter the subpage number at which this page should be displayed by using buttons 0-9 on
the remote controller. To cancel this feature press the button again.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting Guide
Troubleshooting
Before calling service personnel, please check the following chart for a possible cause to the trouble
you are experiencing.
Symptoms
Check the following items
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly adjusted
Power is not turned on
Poor colour, poor tint
Possible interferences of automobiles, motorcycle,
trolley bus, neon lamps, etc.
Spots appear on the screen
Possible interference of electronic interference
from another TV set, a computer, an electronics
game machine, a broadcast station, etc.
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
This may be caused by reflections from nearby
mountains or buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or
comes off.
Check the antenna direction.
No Program menu page
and the maximum volume
is only 60.
Check whether the HOTEL mode is in LOCK status.
Even if the picture or the sound is normal, changes
in room temperature sometimes makes the TV
cabinet expand or contract, making a noise. This
does not indicate a malfunction.
TV cabinet creaks
The batteries may be worn out.
The batteries may be installed with their polarity
reversed.
Remote controller does
not work
When the set is switched on, do not shift or move
the set around. Sometimes it may develop an
unevenness in colour in some parts of the screen.
This can be eliminated by switching off the set with
the POWER switch and wait for 10 minutes before
switching on again.
Unevenness in colour in
some parts of the screen
Check whether the Child Lock is set to On.
The screen is black
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Specifications
Specifications
Power Supply:
Power Consumption:
Dimensions(mm):
Weight(kg):
AC 240V, 50Hz
60W
440(W) x 330(H) x 387(D)
12
CRT:
34cm
TV system & channel range
System
VHF
2-12
UHF
CATV
PAL-B/G
21-69
X~Z+2,S1~S41
TELETEXT
WST FLOF TELETEXT
PAL-B/G NTSC playback
1.5W x 2
Color System:
Sound output:
Accessories:
Remote controller X 1
!
Design and specifications are subject to change without notice.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-J14173-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|