KITCHEN DVD PLAYER
TFTV100A
USER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
CAUTION: Laser radiation when open. Do not stare into beam.
CAUTION
1.
The product contains a low-power laser device. In order to ensure the safety of
the laser device, do not remove any cover and attempt to repair the unit. If any
service is needed, please contact the distributor or its authorised service centre.
To reduce the risk of electric shock, do not remove the cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel.
Unplug the product from the wall outlet before servicing or when it is unused for a
long period of time.
The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorisation from the
manufacturer or authorised unit.
2.
3.
4.
Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Note:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Maintain well ventilated conditions around
the product. Do not put product on bed, sofa or anything that blocks ventilation.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Read, heed and follow all instructions to ensure correct and safe installation and
inter-connection of the apparatus.
10. The apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the apparatus.
11. The mains socket outlet shall be installed near the apparatus and the mains plug
shall remain readily operable.
12. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
13 Only use attachments/accessories specified by the manufacturer.
14. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
15. Unplug this apparatus during lightning storms or when unused for long periods of
time.
16. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
17. The apparatus shall be connected to a mains socket outlet with a protective
earthing connection.
Note: Do not touch the colour TFT LCD screen by hand directly.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
IMPORTANT FOR LASER PRODUCTS
1. CAUTION: LASER RADITATION DO NOT VIEW DIRECTLY
WITH OPTICAL INSTUMEMENTS CLASS 1M LASER
PRODUCT
2. DANGER: Visible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit. Leave all servicing to qualified
service personnel.
Region code information: DVD players and discs are coded by region. If the region
number described on the DVD disc does not correspond to the region number of this
product, this product cannot play the disc. The region code of this unit is 4.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Notice
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Characteristic Features
This product incorporates a DVD
player, LCD display, TV receiver and
radio function in one system. It is
designed for convenient use in the
kitchen. Please refer to page 30 for the
installation instructions.
Advanced Playing Functions
Compatibility
Plays: DVD, DVD-RW, CD, CD-R/RW
and Picture CD and JPEG discs etc.
On-Screen Display
Displays your choice of English,
French, Spanish, German or Italian.
Multiple Modes
DVD
TV
Fast Search Function
Radio
Multi-speed, fast forward, fast reverse,
slow play and repeat playback.
External Audio & Video Input
mode
Zoom Function
Properties
Allows the viewer to enlarge the picture.
Video Screen
Supports normal screen (4:3) and wide
screen (16:9) aspect ratios.
Search By Time
Search for a certain position on a disc.
A/V Input
TV Functions
External Audio/Video input can be
connected to most external A/V sources.
Clear TV signal reception.
Search for TV channels automatically.
Automatically memorise the
channels.
LCD (Liquid Crystal Display) screen
Colour video screen designed with LCD
technology clearly shows video data.
Radio Functions
Amplifier Function
Built-in 2 x 2.5W stereo amplifier with left
and right speakers.
Clear AM/FM signal reception.
Search for radio stations
automatically.
Store radio stations easily.
Search for radio stations in high or
low frequency range.
Switching Power Adapter
Automatically adapts to the input voltage
required.
Special Functions
Supports Multi-language and Parental-
lock features.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Information
Disc Formats Supported By This Player
PLAYBACK TIME/
PLAYABLE SIDES
DISC LOGO
DIAMETER
133 min (SS-SL)
242 min (SS-DL)
266 min (DS-SL)
484 min (DS-DL)
41 min (SS-SL)
75 min (SS-DL)
82 min (DS-SL)
150 min (DS-DL)
12cm
8cm
DVD
12cm
8cm
74 min
20 min
CD
JPEG
12cm
The disc maker specifies the operation of some DVD discs. Please refer to the
instruction manual with the disc.
Care of Discs
Do not touch the playing surface of the
disc.
Cleaning of Discs
If a disc has fingerprints or dust on it,
lightly wipe the disc with a soft cloth
from the centre of the disc outward.
Do not stick paper or labels on the disc.
Storage of Discs
Do not expose discs to direct sunlight or
excessive temperatures.
Never use record cleaning sprays or
any other solvents to clean your discs.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Front Panel Drawing
1. POWER Button
Press to enter or exit the STANDBY mode.
2. Disc Tray
Used to load disc.
3.
Press to start or pause playback under DVD mode.
4. STOP Button
Press to stop playback under DVD mode.
5. Button
PLAY/PAUSE Button
Under DVD mode, press once to go to beginning of the current track/chapter. Press
twice to go to the previous track/chapter during DVD disc playback.
6.
Button
Press to go to the next track under DVD mode.
7. SOURCE button
Press to switch the mode (DVD, TV, A/V, FM, AM).
8.
EJECT button
Press to open or close the disc tray.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
9. Remote Sensor
Receives the remote control signal for operation.
10. Display panel
Displays the time, status, radio frequency and radio station number.
When adjusting volume, the VOL and volume level will be displayed on the display
panel for several seconds.
11. SEEK+/ SEEK- Button
Under radio mode, press once to fine tune the frequency backward or forward. Press for
about 1.5 seconds to search for radio stations forward or backward automatically.
Under DVD mode, press the button to activate fast forward or backward playback.
12. MUTE Button
Press to turn the speaker output on or off. The corresponding information will be
displayed on the display
panel.
13. TIME Button
Press it once to display the time on the display panel. In standby stays, the time is
still displayed on the panel.
Press it again to set the time on the display panel. Use the
buttons to select the
editing position of hour or minute, and then use the
the hour or minute upward and downward.
14. SET Button
buttons to adjust the value of
Press to exit from the timer setup. Press to save the station in the AM/FM mode.
15. CH+/ CH- Button
Press to select items in the setup menu.
Press to select channels or radio stations in the TV or the radio mode.
Press to adjust the value when setting the time on the display panel.
16. VOL-/ VOL+ Button
Press to select items in the setup menu.
Press to adjust the volume. Or press to adjust the value in the picture setup menu.
17. TV/LCD SETUP Button
Press to enter the LCD setup menu.
18. OK Button
Press to confirm selections in the setup menu.
19. LCD Screen
Displays high-resolution pictures
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Rear Panel Drawing
1. ANT INPUT jack
4. Left/Right AUDIO input jack
Connection for audio input.
5. VIDEO input jack
Connection for video input.
6. Direct current 12V input jack
Connected to external antenna to
receive the TV program in the TV mode.
2. FM 75 coaxial antenna jack
3. AM antenna jack
Display Panel Drawing
1. FM radio status indicator
2. AM radio status indicator
AM time indicator
5. Minute or character indicators
6. Character indicators
7. FM frequency unit of MHz indicator
8. AM frequency unit of KHz indicator
3. PM time indicator
4. Hour or character indicators
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Preparation
Refer to the drawing and remove the
battery receptacle.
Using the Remote Control
Point the remote control towards the
main unit when operating. The remote
control works best at a distance less
than 7m and at an angle of 600 to
the front of the unit. No obstacles may
stand in the way between the remote
control and the infrared sensor.
Insert the battery into the receptacle.
Make sure the polarity matches the
marks inside the component.
Insert the receptacle into the remote
control.
The battery normally last for about six
months. This depends on how often
and for what operations the remote
control is used.
If the remote control unit fails to work
even when it is operated near the
player, replace the battery.
If the remote control will not be used
for a long period of time, please remove
the battery from the compartment, to
prevent damage by leakage.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote Control Drawing
- 12-
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1. POWER Button
11.
/SEEK- Button
Press to access or exit the
STANDBY mode.
In the radio mode, press once to fine
tune frequency backward. Press for
about 1.5 seconds to search radio
stations backwards automatically.
Under DVD mode, press to activate fast
backward playback.
2. SUBTITLE Button
Press to select a subtitle language or to
turn subtitles off when a DVD with
multi-subtitles is playing.
12. /SEEK+ Button
3. DVD Button
Press to enter the DVD mode.
In the radio mode, press once to fine
tune frequency forward. Press for about
1.5 seconds to search radio stations
backwards automatically.
4. TV Button
Press to enter the TV mode.
Under DVD mode, press to activate fast
forward playback.
5. AV Button
Press to shift to external A/V input mode.
13. (PLAY) Button
Press to start playback under DVD
mode.
6. AM/FM Button
Press to shift to the FM/AM signal
mode.
14.
(STOP) Button
Press to stop playback in the DVD
mode.
7. TV/LCD SETUP Button
Press to enter the LCD SETUP menu.
15. TITLE Button
8. OK Button
Press to confirm selections.
Press to display titles if present on the
disc under DVD mode.
9.
Press to select menu items or settings.
Press buttons to adjust the values in
the picture setup menu.
,
,
,
Direction Buttons
16. MENU Button
Press to access the disc menu under
DVD mode.
Press
buttons to select channels
17. REPEAT Button
or radio stations forward and backward
in TV or the radio mode. Or press to adjust
the value of time when setting time on
the display panel.
Press to repeat a title, chapter, or the
entire disc under DVD mode.
18. A-B Repeat Button
Used to play a section of the DVD
from point "A" to point "B". Press once
to select the starting point (A) press
again to select the end point (B). Press
a third time to stop the A-B repeat.
10. SET Button
Press to enter and exit from timer
setup menu. Or Press to memorise the
station under AM/FM status
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
19. EJECT Button
28. TIME Button
Press to open or close the disc tray.
Press it once to display the time on the
display panel in standby status, the
time is still displayed on the display
panel
20. AUDIO Button
Press to access various audio
languages, when the DVD disc contains
multiple audio languages.
Press it twice to set the time on the
display panel. Use the
select the editing position of hour or
minute, use the buttons to adjust
buttons to
21. 0-9 Number Buttons
Select numbers by pressing these
buttons.
the value of the hour or minute upward
and downward.
22. GOTO Button
29.
Button
Press to select the desired disc starting
Time, Track or Title to go to.
Press to go to the next track in the DVD
mode.
23. +10 Button
30.
Button
Select track numbers greater than 9 with
other number in the DVD mode.
Under DVD mode, press once to go to the
beginning of the current track or chapter.
Press twice repeatedly to go to
beginning of the previous track or
chapter.
24. 16:9/4:3 Button
Press to shift the aspect radio between
16:9 and 4:3.
31. MUTE Button
25. DVD SETUP Button
Press to access the DVD setup menu
under DVD mode.
Press to turn on/off the speaker output.
The corresponding information will be
displayed on the display panel.
26. INFO Button
32. PAUSE Button
Press to display detailed playback
information under DVD mode.
Press repeatedly to display additional
information or to turn the information
display OFF.
Press to pause playback in DVD mode.
33. ZOOM Button
Press to enter and cycle through zoom
functions, use the direction buttons to
pan around the screen.
27. LCD ON/OFF Button
Press to turn the LCD screen display on
or off under TV, A/V and DVD modes.
34. VOL+/- Buttons
Press to increase or decrease the
speaker volume level.
35. SLOW Button
Press to activate slow forward playback
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Do not connect the power cord until all other connections have been made.
Each time you restart the unit, it remembers the last function used.
Please make all the connections before installing the unit in the kitchen.
Connecting to an External A/V Signal Source
Connections should be made as follows:
Connect the L/R audio cables according to the marks on the rear panel of the unit:
Connecting to a TV Signal Input Source
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Connecting an Antenna
Connect the supplied AM/FM antennas to listen to the radio.
In order to improve the signal, move the AM loop antenna away from the system and
other equipment.
Extend FM antenna fully.
Keep the FM antenna as horizontal as possible after connection.
When connecting the supplied AM loop antenna, connect the two black cord ends to
the AM and ground jacks as shown below.
OUTDOOR
FM ANTENNA
(not suppled)
FM(75
)
EARTH WIRE
(not supplied)
If the FM reception is poor, use a 75 coaxial cable (not supplied) to connect
system to an outdoor FM antenna as above.
If you connect the system with an outdoor FM antenna, you should earth the system
in order to avoid a lightning strike.
Do not connect the ground wire to a gas pipe to prevent a gas explosion.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Connecting the Power Adapter
This unit is powered via the switching power adapter (supplied). See the below figure
for details:
1. Connect the AC adapter to the jack marked with "DC 12V IN" on the rear panel of the
unit.
2. Plug the three-prong end of the power cord to the grounded electrical socket.
3. When not using the unit, turn off the power of the unit first, and then unplug the power
supply to prevent malfunctions.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Function
Radio Function Operation
Press the AM/FM button on the remote control or SOURCE button on the front panel
to enter the AM/FM radio mode. Press and hold the SEEK+/SEEK- button for about 1.5
seconds to start searching forward/backward from the current frequency. Press the
SEEK+/SEEK- button again to stop searching. The radio frequency will be displayed on
the display panel. The frequency range of FM is from 87.5MHz to 108MHz; frequency
range of AM is from 531kHz to 1602kHz.
Fine Tuning
Press the SEEK+/SEEK- button to fine tune the frequency forward/backward under
radio mode.
Semi-memorising radio stations
If you like a radio station and want to store it for later listening, press the SET button
to memorise it. "SAVE X X" will be displayed on the display panel, "X X" represents
the default station number.
There are two methods to organise the saved stations:
Use the
/
(CH+/CH-) buttons to adjust the channel number for your
preference, and then press the SET button again the station will be memorised
with the code station number.
Press the SET button again, the station will be automatically memorised with the
default station number in sequence.
You can store radio stations from 0 to 19, total 20FM or 20AM radio stations. If no
buttons are pressed within 3 seconds of pressing the SET button the first time, the
frequency will appear on the display panel again, and the station will not be stored.
Accessing memorised radio stations
First use the number buttons on the remote control for input, then press the OK
button for confirmation to go to the selected radio station directly. Or without
pressing any button and wait a moment, it also goes to the selected radio station
Press the
backward.
/
(CH+/CH-) buttons to select the radio stations forward and
When selecting the stations, the "CH XX" will appear on the display panel, where the
"XX" is the channel number of the stored radio station. After a few seconds, the "CH XX"
disappears and the radio frequency will be displayed once again.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
Basic Operation
Connect the antenna to the antenna jack on the rear panel. After connecting the
antenna, connect the power supply cord. If the player is in standby mode, press the
POWER button to turn on the power.
Press the TV button on the remote control or the SOURCE button on the front panel
to shift to TV mode.
Press the
/
(CH+/CH-) buttons to select the desired channel. Or first press the
number buttons on the remote control for input, the press the OK button for
confirmation to go to the selected channel directly, or without pressing any buttons and
wait a moment, it also goes to the selected channel.
Some preferences can be preset:
Picture Parameter Setup
Press the TV/LCD SETUP button once to enter the PICTURE setup menu, and screen
displays as shown below:
PICTURE
BRIGHTNESS
CONTRAST
COLOR
10
10
10
LANGUAGE
RESET
ENGLISH
EXIT
TV SETUP
Use the
/
(CH+/CH-) buttons to select the item you want to set (Brightness,
Contrast, Colour).
Use the
Use the
/
(VOL+/VOL-) buttons to adjust the items between 0 and 20.
(CH+/CH-) buttons to select the Language, press the (VOL+/VOL-)
/
/
buttons to select the language you prefer.
To restore a settings to the original value, use the
Reset, then press the OK or to confirm the change.
/
(CH+/CH-) buttons to select
First use the
/
(CH+/CH-) buttons to highlight the PICTURE, and press the
button to exit the PICTURE setup menu. Press the button to enter the TV Setup
menu.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
TV System Setup
When the button is pressed, the TV system setup menu will appear as below:
TV SETUP
PAL B/G
001
SYSTEM
CHANNEL
SKIP
OFF
_ _ _
OFF
SWAP
BLUE SCREEN
FINE TUNING
AUTO MEMORY
PICTURE
EXIT
Use the
Use the
/
(CH+/CH-) buttons to select the item you want to set.
(VOL+/VOL-) buttons to select the item and enter it.
/
First use the
/
(CH+/CH-) buttons to highlight TV SETUP, and press the
button to exit from the TV SETUP menu and press the button to return to the
PICTURE setup menu.
System
Use the
is PAL B/G.
/
(VOL+/VOL-) buttons to select type of TV system. The default system
(CH+/CH-) buttons to change the channel.
Channel
Use the
/
Skip
When the button is pressed to turn the function ON, it will skip the current channel
when using (CH+/CH-) to select channels.
/
When the button is used to turn the function OFF, it will play the channels in
sequence when selecting under normal playback status.
Swap
Use the
/
(CH+/CH-) buttons to select SWAP, press the number buttons on the
remote control to input the current number, the the channel will be swapped to
selected channel.
Blue Screen
This function is only available under no signal input mode.
Use the button to turn the function ON, use the button to turn the function OFF
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
Fine Tuning
Use the
/
(CH+/CH-) buttons to select Fine Tuning, and then press the
/
(VOL+/VOL-) button to tune forward or backward from the current channel.
Auto Memory
Use the (CH+/CH-) buttons to select Auto Memory, press the OK or button to
enter auto memory mode:
/
SEARCHING
EXIT
CH: 001
089.75MHz
The auto memory will take a few minutes. The unit will search channels from the
lowest channel to the highest channel in the standard channel list. When tuning
operations are complete, the unit will exit and store the channels by sequence in the
memory.
During tuning, press the button to exit the auto memory.
Use the
/
(CH+/CH-) buttons to select the desired channel from those in memory.
Timer Setup
Press the SET to enter Timer setup menu, the screen will display as below:
TIMER SET
TIMER
OFF
_ _: _ _ am
_ _: _ _ am
TV
POWER ON
POWER OFF
SIGNAL
CHANNEL
001
EXIT: SET
Use the
Use the
/
/
(CH+/CH-) buttons to select the item you want to set.
(VOL+/VOL-) buttons to enter the item and to select.
Press the SET button again to exit from the setup menu.
Timer
Use the
/
(VOL+/VOL-) buttons to select ON or OFF. This function allows you to
set the start time and end time of the desired signal source. No matter what mode the
unit is in, this function will automatically start the playback of desired signal source.
Select ON to activate this function; select OFF to disable the function.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
Power on
To set the playback start time of the signal source, use the number buttons to input the
desired start time in sequence of hour, minute. Press the
to shift between am and pm.
/
(VOL+/VOL-) buttons
Power off
To set the playback end time of the signal source, use the number buttons to input the
desired time in sequence of hour, minute. Press the (VOL+/VOL-) buttons to
/
shift between am and pm. when the playback of the signal source is over, the player
will enter standby mode.
Signal
Use the
/
(VOL+/VOL-) buttons to select TV, FM or AM.
Channel
Use number buttons to input the desired TV channel.
NOTE:
The function is active as long as the unit is continuously supplied with power. The unit
will automatically play the selected input signal at the set start time and enter standby
mode at the set end time each day.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
AV Function
A/V Function
The player has an additional A/V input so it can function as a monitor for a DVD player,
video cassette player, satellite receiver, video games, etc. When an A/V source is
connected, press the A/V button on the remote control to enter SOURCE button on the
front panel to enter external input A/V mode.
Picture Parameter Setup
Press the TV/LCD SETUP button once to enter the PICTURE setup menu, and screen
will display as shown below:
PICTURE
BRIGHTNESS
CONTRAST
COLOR
10
10
10
LANGUAGE
RESET
ENGLISH
EXIT
Use the
/
(CH+/CH-) buttons to select the item you want to set (Brightness,
Contrast, Colour).
Use the
Use the
/
/
(VOL+/VOL-) buttons to adjust the items between 0 and 20.
(CH+/CH-) buttons to select Language, press the (VOL+/VOL-)
/
buttons to select the language you prefer.
Select Reset and press the OK or button to return to the factory default settings.
First use the (CH+/CH-) buttons to highlight PICTURE, and press the button
/
to exit from the PICTURE setup menu.
NOTE:
Under A/V mode, if there is no signal, the LCD screen will be blue screen.
When connect to an AV signal source, make sure the type of selected AV
signal source is PAL.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Operation
Preparation
1. Install the unit in the kitchen, refer to page 31 for details.
2. After connecting the unit to the AC power, turn on the unit's power by pressing
the POWER button.
3. Press the DVD button on the remote control or the SOURCE button on the front
panel to shift to DVD mode.
4. Press the EJECT button to open the disc tray.
5. Load the disc with the label facing up.
6. Press the EJECT button again to close the disc tray. The player will automatically
search for the disc and start playback.
DVD Playback
Menu
Normally there is a selecting menu for DVD disc. You can press the MENU button to
enter the menu and use the direction buttons to highlight an item you would like to
select. Press the OK button to select it.
Title & Chapter
Normally there are several titles in a DVD disc and several chapters (sections) in a
title. You can select any title or chapter quickly by entering the relevant number.
Audio
DVD discs can contain up to 8 audio bit streams. For example: English, Spanish,
French etc.
To select the audio bit stream you prefer, press the AUDIO button on the remote
control during playback. The DVD player will play the next audio bit stream every time
you press the AUDIO button in succession.
Note this function is only available for disc the have several audio bit streams
recorded on to it.
NOTE
This function is only available for DVD discs that have recorded with multi-
subtitles.
Subtitle
A DVD disc can be recorded with up to 32 subtitle tracks.
Press the SUBTITLE button on the remote control during playback to select the one
you prefer.
NOTE: This function is only available on DVD discs that are recorded with multiple
subtitles.
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Play Operation
CD Playback
The player will play all tracks on a CD disc by default. You can use the
or number buttons to select a track.
/
buttons
JPEG Playback
JPEG is a common picture format that requires small amounts of storage per image
and has low loss in resolution. Hundreds of pictures can be stored on a disc in this
format. In order to view JPEG photo albums, you can ask your film development
company to make a PICTURE CD when they develop your film.
Normal Playback
Load a JPEG disc. Use the OK button and
/
(VOL+/VOL-) button to select a
submenu with picture, then use the (CH+/CH-) button to select the contents.
/
Many discs have other contents besides pictures.
Picture Rotation
This can be used only when the picture is normally displayed. Once another picture is
selected, rotation will be cancelled automatically.
During playback, use the direction buttons to rotate the picture.
Zoom and Move
The ZOOM button is used to turn on/off the zoom and move functions.
When this function is turned on, use the
/
(SEEK+/SEEK-) button to control
zoom proportion and the screen will display the relevant proportion.
When this function is turned off, the picture will resume normal size. Press the MENU
buttons to return to menu page.
Some JPEG discs may not support rotation or zooming functions.
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Functions
Stop
During playback, press the STOP button once to stop playback of a disc. Press the
PLAY button, and the DVD Player will resume playback of the disc from the point
where it was stopped.
Pause
Press the PAUSE button once to pause playback.
Press the PLAY button to resume normal playback.
Resume Playback
Press the STOP button at the point you wish to stop the playback of a disc. The
DVD Player will memorise the location where playback of the disc has stopped.
Press the PLAY button to resume normal playback. The DVD Player will resume the
playback of the disc from the location where it was stopped. This function will not
operate if the disc was removed from the DVD player.
Press STOP button twice (2). Playback of the disc will stop. When the Play
button is pressed again, playback of the disc will start from the beginning of the disc.
Zoom
Press the ZOOM button on the remote control to cycle through the different zoom
settings.
Fast Playback
Press the
/
(SEEK+/SEEK-) buttons to activate fast forward/backward playback.
Slow Playback
Press the SLOW button to activate slow forward playback.
There is no slow playback for CD discs.
Previous and Next
Press the
button once to return to the beginning currently playing Chapter or
Track. Press this button twice repeatedly and playback will start from the previous
Chapter or Track.
Press the
button and playback of the disc will start from the next Chapter or Track.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Functions
Search By Time
During DVD disc playback, press the GOTO button on the remote control once, there
will be a menu displayed on the screen. You can set or select items for your
preference. Use the
enter and use the
/
(CH+/CH-) buttons to select items, press the OK button to
(CH+/CH-) buttons to select the items. Press the
/
button to return. When select Title or Chapter, use the number buttons to input
the desired title or chapter number.
Some DVD discs do not support this search function.
Repeat
To repeat a Title, Chapter or Track, press the REPEAT button on the remote control.
Continually pressing the REPEAT button the screen will display the menu as following:
Repeat Chapter, Repeat Title, Repeat All.
You can temporarily select a section of a DVD that you would like to play repeatedly.
You do this by marking the start and the end of the section using the A-B button on
the remote control. During playback press the A-B button at the beginning of the
segment (point A) you wish to play repeatedly. Press the A-B button again to mark the
end of the segment (point B).
The DVD player will automatically return to point A and repeat play the selected
segment (A-B). To resume normal playback, press the A-B button again.
Screen Mode
Press the 16:9/4:3 button on the remote control to switch the screen aspect ratio
between 16:9 and 4:3.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
DVD Setup
You can customise the set up menu options to your liking.
Press the "DVD SETUP" button on the remote control to display the setup menu. The
menu will include "General Setup", "Speaker Setup", "Dolby Digital Setup", "Video
Setup" and "Preference Setup". Press the direction button (
) to select a
category. All the items in the category will appear on the screen. Press the OK
button to enter the category.
Category
When you enter a category all the items under this category will appear, the
highlighted category is the current set up.
Press the button to select another category (new selection will be highlighted).
Press the OK button for confirmation.
Press the button to enter the other setup menu(s).
General Setup
TV Display
Select Normal/PS or Normal/LB when a 4:3 TV is connected.
Select Wide using the 16:9 screen on the unit or when a wide screen TV is
connected.
OSD Lang
There are five different OSD languages for selection. You can select English, French,
Spanish, German or Italian.
Captions
You can choose caption ON or OFF during playback.
Screen Saver
When activated, under stop mode, the unit will go into the screen saver mode if the same
image remains on the screen for several minutes.
Speaker Setup
Downmix
Select "LT/RT" in DOWNMIX, the player will output the audio signal in mixed mono.
Select "Stereo", then the player will output a stereo signal.
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Dolby Digital Setup
Dual Mono
The function is used to select from Stereo, Left only, Right only, and Mixed mono.
Dynamic
Use this item to adjust the linear dynamic compression rate to get different signal
compression effects.
Video Setup
Sharpness
Use this setting to adjust the sharpness level
Brightness
Use this setting to adjust the brightness level.
Contrast
Use this setting to adjust the contrast level.
Preference Page
Audio, Subtitle, Disc Menu
This setting allows you to hear or read the subtitles of a DVD in your choice of
English, Spanish and French etc, if the disc contains multiple languages.
Parental
DVD discs equipped with the child lock function are rated according to their contents
and settings vary from disc to disc. Depending on the disc, you can lock out selected
scenes or playback of the disc altogether. You can access parental control by
pressing the
/
(CH+/CH-) and then press the OK button.
Password
Parental control features are password protected. The original setting is unlocked. This
setting allows you to use the number buttons to input any password.
NOTE: The Default Password is 1369. This password is always effective even after
you have selected your own password and changed it. To avoid the possibility of
others using the default password to set the parental level and change the password,
you can record this default password in another area and delete it from this manual.
Some discs can be limited depending on the age of users while some disc cannot.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Default Reset
Use this function to reset the unit to the factory default settings.
NOTE: For preference settings, the unit must be in the stop mode.
LCD Setup
Under DVD mode, press the TV/LCD SETUP button, there will be a menu will be
displayed on the screen.
PICTURE
BRIGHTNESS
CONTRAST
COLOR
10
10
10
LANGUAGE
RESET
ENGLISH
EXIT
Use the
/
(CH+/CH-) buttons to select the item you want to set (Brightness,
Contrast, Colour).
Use the
20.
/
/
(VOL+/VOL-) buttons to adjust, you can adjust the items between 0 and
(CH+/CH-) buttons to select the Language, press the (VOL+/VOL-)
Use the
/
buttons to select the language you prefer.
Select Reset, and press the OK or button to resume the original status.
First use the (CH+/CH-) buttons to highlight PICTURE, and press the
button on the remote control to exit the setup menu.
/
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Unit In Kitchen
Installing the unit under a cabinet
The player may be installed in the kitchen with or without the spacer. The
suggested mounting position of the unit is under a wall cabinet. See the drawing below:
NOTE: The dimensions of the player: 355mm x 75mm x 285mm (W/H/D)
There should be at least a 35mm distance between the unit and the wall.
Installing steps
1. Mark the position of the 4 holes by using the supplied template. Drill four 6.5mm
diameter holes. As shown below:
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Unit In Kitchen
2. If the cabinet door overhangs the shelf and obstructs the unit, adjust the unit or the
shelf height for clearance.
3. Install the unit with the supplied mounting screws.
Quick hints
Since the unit is rather heavy, be careful while doing the fixing work.
To reduce the risk of fire, do not place any heating or cooking appliances beneath
the unit, especially while the LCD screen is open on viewing.
Mount the unit so that its AC power cord can be plugged directly to a wall outlet.
Do not use a converter or extension cord.
Be sure that the AC power cord has no slack when the player is working,
because the cord acts as an FM wire antenna. If the AC power cord has some
slack, wind it up to a cord hook until the cord has no slack.
The unit has a built-in ferrite bar antenna for AM radio reception. Check the
condition of AM reception before fixing in position.
Install the unit as far as possible from other electrical devices such as:
refrigerators, microwave ovens, fluorescent lamps, etc.
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
SYMPTOM
CHECK ITEM
Make sure a disc is loaded.
Make sure the disc is loaded with label side up.
Disc should be clean, not dirty or warped.
Player's region code should be the same as the region code
of the DVD disc.
The player cannot
play.
Make sure water condensation has not occurred. If it has,
remove the disc and keep the player power on until the
moisture evaporates.
Make sure system connection is correct.
Make sure the player is not muting mode.
Press the MUTE button to turn on the speakers.
Make sure the volume is not adjusted to the lowest level.
Adjust the volume upwards.
There is no sound.
Is your disc dirty or warped? Clean or replace it.
There is no picture
or picture is
unsteady. Position
of the picture is
incorrect.
Make sure the video type of the AV signal source is PAL
Make sure system connection is correct.
Is your disc dirty or warped? Clean or replace it.
Cannot continue to
play and plays a
section repeatedly.
Make sure the player is not in A-B repeat status.
Press A-B button to cancel A-B repeat status.
Is your disc dirty or warped? Clean or replace it.
Make sure there are no objects between the remote control
and the player.
Make sure the remote control is pointing at the player.
Make sure batteries are inserted correctly (check polarity).
Replace weak batteries.
The remote control
does not work.
Other Notes: Static or other external interfere may cause the player to behave
abnormally. If this occurs, unplug the power-supply cord from the outlet and plug it in
again to reset the player. If the problems persists, then please disconnect the power
and consult a qualified technician.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
LCD screen size
Laser Wavelength
Video System
10.2 inches
Wavelength: 780/650nm
PAL
Frequency Response
Audio Signal-to-Noise
Audio distortion + noise
Channel Separation
Dynamic Range
20Hz~20kHz ±2.5dB
85 dB
< -70dB (1KHz)
> 70dB (1KHz)
>80dB (1KHz)
PLL
System
AM
FM
531~1602kHz
Radio
Frequency
Range
87.5~108MHz
Power
Power Consumption
Dimensions
AC100V~ 240V, 50/60Hz
30W
355mm x 75mm x 285mm (W/H/D)
About 4 kg
Weight
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc.
All rights reserved.
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
|