Palsonic Flat Panel Television TFTV935S User Manual

OWNER'S MANUAL  
93CM CORDLESS REMOTE LCD TELEVISION & MONITOR  
MODEL: TFTV935S  
N111  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents (continued)  
Selecting the Preset Colour Temperature ...........................................................................................  
Setting the APL Function On or Off .....................................................................................................  
Setting Sound ............................................................................................................................................  
Adjusting the Volume ..........................................................................................................................  
Adjusting the Sound Balance ..............................................................................................................  
Adjusting the Headphone Volume .......................................................................................................  
Adjusting Equaliser .............................................................................................................................  
Stereo/Bilingual Selection ...................................................................................................................  
Setting System ...........................................................................................................................................  
Setting Colour System .........................................................................................................................  
Setting Sound System .........................................................................................................................  
Changing Screen Aspect Ratio ...........................................................................................................  
Setting Menu Language ......................................................................................................................  
Setting Menu Background ...................................................................................................................  
Setting WSS ........................................................................................................................................  
Setting Blue Screen .............................................................................................................................  
Setting Sleep Timer .............................................................................................................................  
Setting Timer .......................................................................................................................................  
Setting On Program and On Volume ................................................................................................  
Changing Screen Layout ...........................................................................................................................  
Selecting Screen Layout .....................................................................................................................  
PIP Operations ..........................................................................................................................................  
Viewing the Picture-in-Picture .............................................................................................................  
Using PIP-POS button ........................................................................................................................  
Using ACT.WIN Button .......................................................................................................................  
Swap the Contents of the PIP Image and Main Image .......................................................................  
Adjustment in D-Sub Mode ........................................................................................................................  
Adjusting Image Horizontal Size .........................................................................................................  
Changing the Position of Image ..........................................................................................................  
Adjusting Phase ..................................................................................................................................  
Adjusting the Screen Automatically .....................................................................................................  
Loading Default Values .......................................................................................................................  
Teletext ......................................................................................................................................................  
What is Teletext ...................................................................................................................................  
Turning On and Off Teletext ................................................................................................................  
Button Functions .................................................................................................................................  
Troubleshooting .........................................................................................................................................  
Care and Maintenance ...............................................................................................................................  
Specifications .............................................................................................................................................  
21  
21  
22  
22  
22  
22  
22  
23  
24  
24  
24  
24  
24  
25  
25  
25  
25  
25  
25  
26  
26  
27  
27  
27  
27  
27  
28  
28  
28  
28  
28  
28  
29  
29  
29  
29  
30  
31  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Precautions  
Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if  
improperly handled. This product has been engineered and manufactured with the highest priority on safety. But  
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent  
potential danger, please observe the following instructions when installing, operating and cleaning the product. To  
ensure your safety and prolong the service life of your LCD TV product, please read the following precautions carefully  
before using the product.  
1. Read these instructions --- All operating instructions must be read and understood before the product is operated.  
2. Keep these instructions ---These safety and operating instructions must be kept in a safe place for future reference.  
3. Head all warnings --- All warnings on the product and in the instructions must be observed closely.  
4. Follow all instructions --- All operating instructions must be followed.  
5. Attachments --- Only use attachments/accessories specified by the manufacturer. Do not use attachments not  
recommended by the manufacturer. Use of improper attachments can result in accidents,  
6. Power source --- This product is intended to be supplied by a listed power supply indicated on the marking label.  
If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For  
added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of  
time, unplug it from the wall outlet and disconnect the cable system.  
7. Power cord protection --- Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
8. Overloading --- Do not overload wall outlets, extension cords, or convenience receptacles on other  
equipment as this can result in a risk of fire or electric shock.  
9. Entering of objects and liquids --- Never insert an object into the product through vents or openings. High voltage  
flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason,  
do not spill water or liquid on the product.  
10. Servicing --- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in anyway, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into  
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.  
11. Damage requiring service --- If any of the following conditions occurs, unplug the power cord from the AC outlet,  
and request a qualified service person to perform repairs.  
a. When the power cord or plug is damaged.  
b. When a liquid is spilled on the product or when objects have fallen into the product.  
c. When the product has been exposed to rain or water.  
d. When the product does not operate properly as described in the operating instructions.  
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not  
described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.  
e. If the product has been dropped or the cabinet has been damaged in anyway.  
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable  
abnormality in the product indicates that the product needs servicing.  
12. Replacement parts --- In case the product needs replacement parts, make sure that the service person uses  
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the  
original parts. Use of unauthorised parts can result in fire, electric shock and/or other danger.  
13. Safety checks --- Upon completion of service or repair work, request the service technician to perform safety  
checks to ensure that the product is in proper operating condition.  
14. Wall or ceiling mounting --- When mounting the product on a wall or ceiling, be sure to install the product  
according to the method recommended by the manufacturer. This is a safety feature.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Precautions (continued)  
15. Stand --- Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. Do not place the product on an unstable  
trolley, stand, tripod or table. Placing the product on an unstable base can cause  
the product to fall, resulting in serious personal injuries as well as damage to the  
product. When mounting the product on a wall, be sure to follow the manufacturer's  
instructions. Use only the mounting hardware recommended by the manufacturer.  
16. Careful move --- When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over. Sudden stops, excessive force and uneven  
floor surfaces can cause the product to fall from the trolley.  
17. Lightning --- Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
For added protection for this television equipment during a lightning storm, or when  
it is left unattended and unused for long periods of time, unplug it from the wall outlet  
and disconnect the antenna. This will prevent damage to the equipment due to  
lightning and power-line surges.  
18. Do not use this apparatus near water --- for example, near a bathtub, washbowl,  
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.  
Do not use immediately after moving from a low temperature to high temperature  
environment, as this causes condensation, which may result in fire, electric shock, or  
other hazards.  
19. Clean only with dry cloth --- Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
20. Ventilation --- Do not block any ventilation openings. Install in accordance with  
the manufacturer instructions. The vents and other openings in the cabinet are  
designed for ventilation. Do not cover or block these vents and openings since  
insufficient ventilation can cause overheating and/or shorten the life of the product.  
Do not place the product on a bed, sofa, rug or other similar surface, since they  
can block ventilation openings. This product is not designed for built-in installation;  
do not place the product in an enclosed place such as a bookcase or rack, unless  
proper ventilation is provided or the manufacturer's instructions are followed.  
21. Heat sources --- Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers) that produce heat.  
22. Panel protection --- The LCD panel used in this product is made of glass.  
Therefore, it can break when the product is dropped or impacted upon by other  
objects. Be careful not to be injured by broken glass pieces in case the LCD panel  
breaks.  
23. Pixel defect --- The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally,  
a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not  
affect the performance of your product.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
Using the Remote Control  
Use the remote control by pointing it towards the remote sensor window of the set.  
Objects between the remote control and sensor window may prevent proper operation.  
Note: the illustration is for your reference only, the remote sensor may locate differently  
with different model.  
DSP/CAPS  
1
4
2
5
3
6
9
0
7
8
PIP  
POP  
M
.
W
I
N
A
C
T
.
W
I
N
P
I
P
-
P
O
S
S
T
E
R
E
O
T
I
M
E
R
SWAP  
P
.
M
O
D
E
S
.
M
O
D
E
F
A
V
.
SLEEP  
FREEZE  
Cautions regarding use of remote control  
ENTER  
AUTO  
CHILD LOCK  
-
+
+
-
Do not expose the remote control to shock. In addition, do not expose the remote  
control to liquids, and do not place in an area with high humidity.  
Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.  
The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or  
strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer  
to the remote sensor window.  
Batteries for the Remote Control  
If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.  
1
Open the battery cover.  
2
Insert two size-AAA batteries.  
(Place the batteries with their terminals  
corresponding to the (+) and (-)  
indications in the battery compartment.)  
3
Replace the cover and slide in  
reverse until the lock snaps.  
Precautions on battery use  
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.  
Place batteries with their terminals corresponding to the (+) and (-) indications.  
Different types of batteries have different characteristics. Do not mix batteries of different types.  
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old  
batteries to leak chemicals.  
Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical  
leakage is found, wipe with a cloth.  
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.  
If the remote control is not used for an extended period of time, remove the batteries from the remote control.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations (continued)  
Antenna Connection  
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the  
picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.  
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.  
The exact type and position of the aerial will depend upon your particular area.  
75-ohm coaxial cable (round cable)  
Note:  
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur  
due to radio wave conditions.  
The aerial cable should not be bundled with the power cord and the like.  
Power Connection  
Insert the AC Power plug into a conveniently located AC Outlet  
Note:  
This product should be operated only from the type of power source indicated on the marking label.  
Always unplug the AC cord from power outlet when not using for a long period of time.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls  
Main Unit  
VOL  
VOL+  
INPUT  
CH  
CH+  
1
2
3
4
5
6
Power Switch  
Press the VOL+/- or VOL- button to directly increase or decrease the sound volume level;  
1. VOL+/-  
2. MENU  
Press this button to access the Menu main page  
3. Remote Sensor  
4. SOURCE  
To access signal source select menu  
5. CH+/-  
Press these two buttons to directly change the TV channel;  
6. Power Indicator  
Note:  
Functions of VOL+/-, CH+/-, MENU and SOURCE are also provided to the remote control. This operation manual  
provides a description based on operating functions with the remote control.  
OSD means On Screen Display.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls (continued)  
Main Unit  
HDMI/DVI IN  
AUDIO  
D-Sub IN  
D-Sub  
UPDATE interface  
Y
COMPONENT IN  
Pb AUDIO L  
Pr AUDIO R  
AERIAL INPUT  
HEADPHONE JACK  
SCART 1 INTERFACE  
SCART 2 INTERFACE  
R
1. AV inputs (Video, Audio L/MONO, R) / S-Video input  
Receive video/audio signals from external sources such as VCR or DVD player.  
Receive a S-Video signal from external source such as VCR or DVD player.  
2. HDMI/DVI interface  
3. D-Sub input/Audio in  
Connect to the D-Sub/audio output sockets on your PC.  
4. UPDATE interface  
For service use only. The user cannot operate the unit through the UPDATE interface.  
5. Component inputs (Y, Pb, Pr, Audio L, R)  
Connect to the component and audio output sockets of a DVD player or Set-Top Box.  
6. Aerial input  
Allows you to connect cable or outdoor aerial  
7. Headphone jack  
8. 21-pin Euro-SCART1 (VIDEO/RGB) interface  
9. 21-pin Euro-SCART2 (VIDEO/S-VIDEO) interface  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls (continued)  
Remote Control  
POWER  
Turn the unit on or standby  
0~9 digit buttons, -/-- button  
1.  
2.  
1
2
11  
12  
0~9: direct channel select;  
To input characters when editing channel label  
-/-- button: two digit/three digit channel number selector  
PIP  
To activate picture-in-picture  
POP  
activate picture-out-picture  
PIP-POS  
3.  
4.  
5.  
13  
14  
3
4
To select PIP frame position  
STEREO  
To select stereo, mono or bilingual  
5
6
15 6.  
16  
P.MODE  
7.  
7
17  
To quickly select picture mode  
Red button (teletext)  
8
18  
9
10  
S.MODE  
8.  
To quickly select sound mode  
Green button (teletext)  
FREEZE  
9.  
To freeze current picture  
MENU  
10.  
To access the MENU main page  
In Menu operation, press this button to return to a higher level menu  
DSP/CAPS  
11.  
To display current channel status  
To switch between uppercase and lowercase input mode when  
editing channel label.  
RETURN  
12.  
13.  
To quickly jump between current channel and last selected channel.  
To switch to previous source  
ACT.WIN  
To select main picture frame or PIP frame when viewing  
picture-in-picture  
M.WIN  
14.  
15.  
To select to view multi-window mode  
SWAP/SORT  
In full screen of TV program, press this button to access channel  
editing mode  
When viewing PIP TV program, press this button to exchange the  
Contents of the PIP Image and Main Image  
TIMER  
16.  
17.  
To set current time, turn-off timer or turn-on timer  
SLEEP  
To set sleep timer  
Blue button (teletext)  
FAV.  
18.  
To cycle among all favourite channels  
Yellow button (teletext)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Idenification of Controls (continued)  
Remote Control  
19. ENTER, ENTER (Up/Down), ENTER (Left/Right)  
ENTER: To confirm your operatlon or setting or access submenu;  
ENTER (Up/Down) To move upward or downward in menu  
operation;  
ENTER (Left/Right) To move left or right in menu operation;  
To adjust selected menu item in menu operation  
20. SOURCE  
To access source select menu  
21. AUTO/CHILD LOCK  
To rectify the picture automatically in VGA model lock or unlock  
channels in TV mode  
22. CHANNEL +/-  
Use to switch channels;  
23. TEXT  
To enter/exit teletext mode (Teletext)  
26  
24. HOLD  
To hold the current teletext page temporarily (Teletext)  
25. UPDATE  
19  
To view update teletext page (Teletext)  
26. ZOOM  
To select Screen Aspect Ratio  
20  
21  
27  
28  
AUTO  
This button doesn't work under [POP 4:3], [POP Full],  
[4 Windows], [9 Windows]  
22  
-
+
-
+
27. MUTE  
Sound mute  
28. VOLUME +/-  
23  
24  
25  
29  
Use to adjust volume  
30  
31  
29. MIX  
To superimpose text on a TV picture (Teletext)  
30. SIZE  
To expand top half or bottom half page of current screen (Teletext)  
31. REVEAL  
To display hidden information such as solutions to riddles and  
puzzles. (Teletext)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Cautions before connecting  
Carefully check the terminals for position and type before making any connections.  
The illustration of the external equipment may be different depending on your model.  
Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted  
into their terminals.  
Refer to the operating manual of the external device as well.  
When connecting an external device, turn the power off on the panel to avoid any issues.  
Connect a Decoder  
21-pin SCART  
connector  
Decoder  
How to connect:  
Connect the SCART Cable between the unit and the Decoder.  
Select Main Source  
1. TV  
2. Video  
To watch Decoder  
1. Turn on your LCD TV, press SOURCE  
control.  
2. Push ENTER (Up/Down) to select SCART 1 and press ENTER to  
confirm.  
button on the remote  
3. S-Video  
4. SCART 1  
5. SCART 2 AV  
6. SCART 2 Y/C  
7. YPbPr  
8. D-Sub  
9. HDMI  
3. Turn on your Decoder.  
Note:  
1. The unit receives CVBS (VIDEO) signal and RGB signal from SCART1 interface and is able to identify the signal  
format automatically. The unit chooses the RGB signal prior to the CVBS (VIDEO) signal.  
2. To connect to external devices with AV terminals, you may use 21-pin Scart Converter to connect to SCART  
interface on the unit, and the unit receives CVBS (VIDEO) signal only.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (continued)  
Connect a VCR  
SCART Cable  
Rear of the VCR  
21 -pin SCART  
connector  
VCR  
How to connect:  
Connect the SCART Cable between the unit and the VCR.  
Select Main Source  
1. TV  
2. Video  
To play VCR  
1. Turn on your LCD TV, press SOURCE  
3. S-Video  
4. SCART 1  
5. SCART 2 AV  
6. SCART 2 Y/C  
7. YPbPr  
button on the remote  
control.  
2. Push ENTER (Up/Down) to select Scart2 AV and press ENTER to  
confirm.  
8. D-Sub  
9. HDMI  
3. Turn on your VCR, insert a videotape and press the Play button.  
Note:  
The unit receives CVBS (VIDEO) signal and Y/C (S-VIDEO) signal from SCART2 interface.  
When receiving Y/C signal, you need to select Scart 2 Y/C instead of Scart 2 AV in the source select menu.  
Therefore, if you find that the colour is not properly displayed, please try to select Scart 2 Y/C.  
To connect to external devices with AV terminals, you may use 2 I-pin Scart Converter to connect to SCART  
interface on the unit, then please select Scart 2 AV and the unit receives CVBS (VIDEO) signal only.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO  
L/MONO  
AUDIO  
R
S-VIDEO  
AV IN / S-VIDEO IN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (continued)  
Connect a DVD Player or Home Cinema System  
Video  
cable  
Audio  
cable  
DVD player  
white (audio L)  
red (audio R, Pr)  
Green (Y)  
Blue (Pb)  
Rear of the DVD player  
How to connect a DVD Player or Home Cinema System using Component Video Connections:  
Connect the Video cable between the Y, Cb, Cr input jacks on the unit and Cb, Cr output jacks on the DVD player.  
Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD player.  
To play DVD  
1. Turn on your LCD TV, press SOURCE  
control.  
button on the remote  
Select Main Source  
2. Press ENTER (Up/Down) to select YPbPr.  
3. Press ENTER to confirm.  
1. TV  
2. Video  
3. S-Video  
4. SCART 1  
5. SCART 2 AV  
6. SCART 2 Y/C  
7. YPbPr  
4. Turn on your DVD player, insert a DVD disc and press the  
Play button.  
8. D-Sub  
9. HDMI  
Note:  
The Y, Pb, Pr outputs on your DVD player are sometimes labelled Y, Cb, Cr or Y, B-Y, R-Y.  
If so, connect the cables to like colours.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections (continued)  
Connect a product to HDMI  
Product with HDMI jack  
How to connect:  
Connect the HDMl cable between the HDMl input jacks on the unit and  
HDMl output jacks on the product.  
Note:  
The HDMl Sources are compatible with DVI displays through the use of a  
passive cable converter. So you may connect product with DVI output jack to the unit.  
Connect a passive cable converter between the HDMl input jack on the  
unit and DVI output jack on the product.  
Select Main Source  
Connect an Audio cable between the AUDIO output on your product and  
1. TV  
2. Video  
AUDIO input jack of D-Sub IN on the unit.  
3. S-Video  
4. SCART 1  
5. SCART 2 AV  
6. SCART 2 Y/C  
7. YPbPr  
To Watch your Product  
1. Turn on your LCD TV, press SOURCE  
2. Push ENTER (Up/Down) to select HDMI.  
3. Press ENTER to confirm.  
button on the remote control.  
8. D-Sub  
9. HDMI  
4. Turn on your product.  
Connect a PC  
D-Sub  
Audio  
cable  
cable  
How to connect:  
Connect a D-Sub cable between the S-Sub interface on the PC the  
PC  
D-Sub interface on the unit.  
Connect an Audio cable between the AUDIO output on the PC and  
AUDIO input jack on the unit.  
Select Main Source  
1. TV  
2. Video  
3. S-Video  
4. SCART 1  
5. SCART 2 AV  
6. SCART 2 Y/C  
7. YPbPr  
To Watch the PC screen  
1. Turn on your LCD TV, press SOURCE  
2. Press ENTER (Up/Down) to select D-Sub (D-Sub).  
3. Press ENTER to confirm.  
button on the remote control.  
8. D-Sub  
9. HDMI  
4. Turn on your PC and check for PC system requirements.  
5. Adjust the PC screen.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning the Unit On and Off  
Turning the Unit On and Off  
Turning On  
Insert the power cord into the wall outlet.  
Press the Power Switch on the unit, then press the Power  
the remote control.  
button on  
The unit will be turned on and you will be ready to use its features.  
Turning Off  
With the power on, Press the Power  
button on the remote control to  
turn off the unit, and put the unit in standby mode.  
To cut off the power completely, press the Power Switch.  
Viewing the Menus and Displays  
Your LCD TV has a simple, easy-to-use menu system that appears on the  
screen. This system makes it convenient and fast to use features on the  
unit.  
Viewing the Menus  
With the power on, press the MENU button on the remote control.  
The main menu appears on the screen.  
1
Video  
1. Mode:  
Custom  
2. Contrast  
3. Brightness  
4. Colour  
5. Hue  
70  
30  
45  
0
Push the ENTER (Up/Down) to select menu page. Press ENTER to  
access the menu page.  
2
6. Sharpness  
7. DNR:  
8. Color Temperature:  
9. APL:  
50  
Push ENTER (Up/Down) to select item. Push ENTER (Left/Right) to  
adjust value or setting of each item. Press MENU to exit menu  
system.  
3
Weak  
Standard  
On  
On-screen menu will disappear from the screen automatically after  
some seconds, or you can press the MENU button repeatedly to exit  
the menu system.  
Note:  
n
In Menu operations, you may push ENTER (Up/Down) to select item or  
just press the relevant number button according to the number  
indicated on the left of the menu item.  
To clearly introduce the menu operations, this operation manual  
n
provides a description based on operation with the remote control.  
1
2
3
4
5
Displaying Status Information  
The unit displays current status information (e.g channel number, channel  
name, channel locking status, colour and sound system or stereo mode) by  
pressing the DSP/CAPS button.  
MP:  
PAL  
FM/AM  
ABC  
005  
B/G  
Mono  
1. Information for main picture frame  
9
8
7
6
2. Current channel name  
4. Locked status icon  
6. Sound system  
3. Favourite channel icon  
5. Current channel number  
7. Stereo mode  
8. NICAM status  
9. Colour system  
Note:  
Some of the above items are not always displayed on the screen and they  
are subject to your settings.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing TV Programs  
Your LCD TV can memorise and store all of the available channels. After the available channels are memorised, use  
CHANNEL+/- to scan through the available stations.  
Select a Region  
Before you start automatic search, it is necessary to select a region firstly.  
Press MENU to display the menu main page.  
1
Option  
Push ENTER (Up/Down) repeatedly to display Option menu page.  
Press ENTER to access.  
Off  
2
3
4
5
1. Child Lock:  
2. Change Password  
3. WSS:  
Off  
Off  
Others...  
English  
Opaque  
On  
4. APS:  
5. Program Area:  
6. Menu Language:  
7. Menu Background:  
8. Blue Screen:  
Push ENTER (Down) repeatedly to select Program Area item.  
Push ENTER (Left/Right) to select a proper region according to your  
area.  
Press MENU repeatedly to exit.  
6
Setting APS Function On or Off  
Option  
Repeat steps 1~3 in [Select a Region].  
Off  
1
2
3
1. Child Lock:  
2. Change Password  
3. WSS:  
Off  
Off  
Others...  
English  
Opaque  
On  
Push ENTER (Down) repeatedly to select the APS item.  
4. APS:  
5. Program Area:  
6. Menu Language:  
7. Menu Background:  
8. Blue Screen:  
Push ENTER (Left/Right) to select On or Off.  
Press MENU repeatedly to exit.  
4
After auto searching, the channels will be ranged automatically according to VPS (Video Program System) information  
when this item is set to On in advance.  
Auto Search  
Program  
Press MENU to display the menu main page.  
1
2
19  
1. Program No:  
2. Program Name:  
3. Locked:  
Push ENTER (Up/Down) repeatedly to display Program menu  
page.  
Off  
Off  
Off  
4. Favourite:  
5. Skip:  
Press ENTER to access.  
0
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
3
4
5
AUTO  
D/K  
Push ENTER (Down) repeatedly to select Auto Search item.  
320.25 MHz  
Press ENTER to start auto search.  
The unit will begin memorising all of the available channels.  
Auto Search Program...  
323.25MHz  
7
Note:  
The process of auto search will be stopped if you press the MENU button  
VHF-H  
Manual Fine Tuning  
Program  
Repeat steps 1~3 in [Auto Search].  
1
2
3
19  
1. Program No:  
2. Program Name:  
3. Locked:  
Push ENTER (Down) repeatedly to select Fine Tuning item.  
Off  
Off  
Off  
4. Favourite:  
5. Skip:  
Push ENTER (Left/Right) to fine tune till the best possible picture  
and sound are obtained.  
0
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
AUTO  
D/K  
Press MENU to exit.  
4
320.25 MHz  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing TV Programs (continued)  
Manual Search.  
Use Manual Search if desired channels can not be memorised or if you would like to store programs to specific  
channel numbers one by one.  
Use number buttons to directly select a channel that you want to  
perform manual search.  
1
Program  
19  
1. Program No:  
2. Program Name:  
3. Locked:  
4. Favourite:  
5. Skip:  
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
Press MENU to display the menu main page.  
Push ENTER (Up/Down) repeatedly to display Program menu page.  
Press ENTER to access.  
2
3
4
5
6
Off  
Off  
Off  
0
AUTO  
D/K  
Push ENTER (Down) repeatedly to select Manual Search item.  
320.25 MHz  
YOU may press ENTER to input a frequency or Push  
ENTER (Left/Right) to search program from current frequency.  
Manual Search Program...  
479.25MHz  
19  
To search program manually by inputting a frequency:  
1. Press ENTER, the unit allows you to input a frequency.  
2. Input the desired frequency by using 0~9 buttons, then the unit  
locates to your frequency. If you want to exit, press MENU again.  
UHF  
To search program manually from current frequency:  
Push ENTER (Right) the unit searches towards higher frequency;  
Push ENTER (Left) the unit searches towards lower frequency;  
The search stops when a program is found and this program will be stored in current channel.  
During the process of manual search, you may control the searching direction by pushing ENTER (Left/Right).  
Skipping Channel  
Repeat steps 1~4 in [Manual Search].  
1
Program  
19  
1. Program No:  
2. Program Name:  
3. Locked:  
4. Favourite:  
5. Skip:  
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
Push ENTER (Down) repeatedly to select Skip item.  
2
3
4
Off  
Off  
Off  
Push ENTER (Left/Right) to select On or Off.  
0
Press MENU repeatedly to exit.  
AUTO  
D/K  
When the item is set to on, the selected channel will be skipped.  
When the item is set to off, the selected channel will not be skipped.  
The skipped channels can not be selected by using the CHANNEL+/-  
buttons unless you use number buttons to input channel number  
directly.  
320.25 MHz  
Editing Channels  
Program No.:  
Sorted No.:  
001  
005  
The edit channels function is for you to arrange channel order as you  
wish.  
When viewing single TV screen, press SORT to display Channel Sort  
menu. The current channel number appears in the [Program No.] item.  
Push ENTER (Down) to select Sorted No. item.  
Push ENTER (Left/Right) to select a target channel which is to be exchanged with the current channel.  
Push ENTER (Down) to highlight OK item.  
Press ENTER to confirm exchanging contents in current channel and the target channel.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing TV Program (continued)  
Setting Favourite Channel  
Press MENU to display the menu main page.  
1
2
3
Push ENTER (Up/Down) repeatedly to display Program menu page.  
Program  
19  
1. Program No:  
2. Program Name:  
3. Locked:  
4. Favourite:  
5. Skip:  
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
Press ENTER to access.  
Then the Program No item will be highlighted automatically.  
Off  
Off  
Off  
Push ENTER (Left/Right) to select a channel that you want to set as  
your Favourite channel.  
0
4
AUTO  
D/K  
320.25 MHz  
Push ENTER (Down) repeatedly to select Favourite item.  
Push ENTER (Left/Right) to select On or Off.  
Press MENU repeatedly to exit.  
5
6
7
When the item is set to on, the selected channel will be set as your favourite channel. You can  
repeat the above steps to set more favourite channels so that you can cycle among your favourite  
channels by pressing the FAV. button.  
When you are viewing a favourite channel, a "  
" icon appears on the screen while pressing the  
DSP/CAPS button.  
Editing Program Name  
Repeat steps 1~4 in [Manual Search].  
1
Program  
Push ENTER (Down) to select Program Name item.  
2
3
19  
ABC_  
Off  
1. Program No:  
2. Program Name:  
3. Locked:  
4. Favourite:  
5. Skip:  
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
Press ENTER to edit program name.  
Off  
Off  
0
Push ENTER (Left/Right) to move cursor right or left.  
Use 0~9 number buttons to input characters.  
Use DSP/CAPS to switch between lowercase and uppercase.  
Push ENTER (Down) to delete a character.  
AUTO  
D/K  
320.25 MHz  
After you finish inputting, you may use ENTER to confirm.  
The maximum length of program name is 8 characters.  
Character List  
while pressing DSP/CAPS  
Button  
Character List  
0 * # ( )  
0
1
2
3
4
5
6
7
8
9
0 * # ( )  
1
- . !  
1
- . !  
2 a b c @  
3 d e f #  
4 g h i $  
5 j k l %  
6 m n o ^  
7 p q r &  
8 s t u v  
9 w x y z  
2 A B C @  
3 D E F #  
4 G H I $  
5 J K L %  
6 M N O ^  
7 P Q R &  
8 S T U V  
9 W X Y Z  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locking TV Channels  
Locking or Unlocking TV Channels  
Repeat steps 1~3 in [Auto Search] to display Program menu page.  
Then the Program No item will be highlighted automatically.  
1
2
Program  
19  
1. Program No:  
2. Program Name:  
3. Locked:  
4. Favourite:  
5. Skip:  
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
Push ENTER (Left/Right) to select a channel that you want to lock  
or unlock.  
Off  
Off  
Off  
Push ENTER (Down) repeatedly to select Locked item.  
3
4
5
0
AUTO  
D/K  
Push ENTER (Left/Right) to select On or Off.  
320.25 MHz  
Press MENU repeatedly to exit.  
You can repeat the above steps to lock or unlock other channels.  
Setting Locking Function On or Off  
Option  
Repeat steps 1~3 in [Select a Region] to display Option menu page.  
Then the Child Lock item will be highlighted automatically.  
1
Off  
1. Child Lock:  
2. Change Password  
3. WSS:  
Off  
Off  
Others...  
English  
Opaque  
On  
4. APS:  
Push ENTER (Left/Right) to select On or Off.  
2
3
5. Program Area:  
6. Menu Language:  
7. Menu Background  
8. Blue Screen  
Press MENU repeatedly to exit.  
Note:  
Only when [Child Lock] and [Locked] items are set to On at the same time that the locking TV  
channels function becomes effective.  
When you select a locked channel, a " " icon appears and the screen is blank. In this situation, if you still  
want to view the locked channel, you may follow these steps to unlock:  
1. Press CHILD LOCK to display password input page.  
2. Enter the password. The default password is "000000".  
Once the correct password is inputted, the unit allows you to view all locked channels.  
If the [Child Lock] item is set to [On], the unit asks you to input password if you want to access the [Program]  
menu page.  
If you set the [Child Lock] item to [On], next time if you want to set the [Child Lock] item to [Off], the unit asks  
you to input password.  
Changing Password  
Option  
Repeat steps 1~3 in [Select a Region].  
1
Off  
1. Child Lock:  
2. Change Password  
3. WSS:  
Push ENTER (Down) to select Change Password item.  
Press ENTER to confirm.  
2
3
4
5
6
Off  
Off  
Others...  
English  
Opaque  
On  
4. APS:  
5. Program Area:  
6. Menu Language:  
7. Menu Background:  
8. Blue Screen:  
Input the old password.  
Input the new password.  
Input the new password again and then the password has been  
changed successfully.  
Be sure to write down your password and retain it for future use. If you forget the password, the unit  
provides a master password as "962326" for you to access the locked channels or change password.  
Please DO NOT let the children know the master password.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Changing Channels  
Using the Channel Buttons (CHANNEL +/-)  
Press the CHANNEL +/- to change channels.  
When you press the CHANNEL +/- , the unit changes channels in sequence. You will see all the channels that the unit  
has memorised.  
You will not see channels that were skipped.  
Direct Accessing Channels  
Press the number buttons to go directly to a channel.  
To select a one-digit channel:  
Input the channel number by using the 0-9 number buttons directly.  
To select a two-digit channel:  
Press -/-- to display "- -" and input the channel number by using the 0-9 number buttons.  
To select a three-digit channel:  
Press -/-- to display "- - -"and input the channel number by using the 0-9 number buttons.  
Note:  
When you use the number buttons, You may directly select channels that were skipped.  
Using the RETURN  
button  
Press this button to switch between the current channel and the previous channel.  
Adjusting the Volume  
Using the volume buttons (VOLUME +/-)  
Press the VOLUME + or VOLUME - to increase or decrease the volume.  
Muting the Sound  
Using the MUTE  
button  
At any time, you can temporarily turn off the sound using the MUTE  
button.  
Press the MUTE  
button and the sound turns off.  
1
2
To turn mute off, press the MUTE button again.  
Select Input Source Signal  
Press SOURCE  
to access source select menu.  
Select Main Source  
1
2
1. TV  
2. Video  
Press ENTER (Up/Down) to select a desired signal source.  
3. S-Video  
4. SCART 1  
5. SCART 2 AV  
6. SCART 2 Y/C  
7. YPbPr  
You may directly press the relevant number button to select a desired  
signal source.  
Press ENTER to confirm.  
3
8. D-Sub  
9. HDMI  
TV ------------------ select TV signal.  
Video -------------- select signal from Video terminal.  
S-Video ----------- select signal from S-Video terminal.  
SCART1 ---------- select signal from 21-PIN SCART 1 interface.  
SCART2 AV ----- select signal from 21-PIN SCART 2 interface.  
SCART2 Y/C ---- select SCART 2 YC when viewing Y/C signal from 21-PIN SCART 2 interface.  
YPbPr ------------- select signal from YPbPR or YCbCr terminals.  
D-Sub ------------- select signal from D-Sub (I 5-pin D-sub) terminals.  
HDMI -------------- select signal from HDMI/DVI terminals.  
Note:  
When you select to view program from SCART2 and find the colour is not properly displayed, maybe the unit is  
receiving Y/C signal. To properly display the picture's colour. please select Scart2 Y/C instead of Scart2 AV  
When using 21 pin Scart Converter to connect SCART2 interface on the unit with your extended devices, please  
select Scart 2 AV in source select menu.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Picture  
Using the Preset Picture Mode  
Press MENU to display the menu main page, if the Video menu page  
doesn't appear, then push ENTER (Up/Down) repeatedly to display  
Video menu page.  
1
Video  
1. Mode:  
Custom  
2. Contrast  
3. Brightness  
4. Colour  
5. Hue  
6. Sharpness  
7. DNR:  
70  
30  
45  
0
50  
Press ENTER to access.  
The Mode item will be highlighted automatically.  
2
Weak  
Standard  
On  
Push ENTER (Left/Right) to select a desired picture mode.  
8. Color Temperature:  
9. APL:  
3
4
Press MENU repeatedly to exit.  
There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom].  
Each preset mode has its own picture settings.  
[Vivid]: Select for a bright picture.  
[Standard]: Select for a normal picture.  
[Mild]: Select for a fine/soft picture.  
You may directly use the P.MODE button on the remote control to select a desired picture mode.  
Customising the Picture  
Repeat steps 1~2 in [Using the Preset Picture Mode].  
Video  
1
2
1. Mode:  
Custom  
Push ENTER (Down) repeatedly to select the item you wish to  
adjust.  
2. Contrast  
3. Brightness  
4. Colour  
5. Hue  
6. Sharpness  
7. DNR:  
70  
30  
45  
0
50  
Push ENTER (Left/Right) to adjust the value of the item.  
3
4
Weak  
Standard  
On  
8. Color Temperature:  
9. APL:  
Press MENU repeatedly to exit.  
* The [Hue] item is for NTSC only.  
Reducing Picture Noise  
Video  
Repeat steps 1~2 in [Using the Preset Picture Mode].  
1
2
3
4
1. Mode:  
Custom  
2. Contrast  
3. Brightness  
4. Colour  
5. Hue  
6. Sharpness  
7. DNR:  
70  
30  
45  
0
50  
Push ENTER (Down) repeatedly to select the DNR item.  
Push ENTER (Left/Right) to select.  
Weak  
Standard  
On  
8. Color Temperature:  
9. APL:  
Press MENU repeatedly to exit.  
Sometimes a noisy picture may appear on the screen because of poor signal. This function helps to enhance  
the picture quality by reducing the noise.  
Freezing picture  
Press the FREEZE button to hold on the image on the screen (the video  
sources still run). Press again to reactivate the image.  
Note:  
For the sake of protecting the screen, please do NOT freeze a picture for a long time.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Setting (continued)  
Selecting the Preset Colour Temperature  
Video  
Repeat steps 1~2 in [Using the Preset Picture Mode].  
Push ENTER (Down) repeatedly to select Color Temperature item.  
Press ENTER (Left/Right) to select.  
1
2
3
4
1. Mode:  
Custom  
2. Contrast  
3. Brightness  
4. Colour  
5. Hue  
6. Sharpness  
7. DNR:  
70  
30  
45  
0
50  
Weak  
Standard  
On  
Press MENU repeatedly to exit.  
8. Color Temperature:  
9. APL:  
Setting the APL Function On or Off  
Repeat steps 1~2 in [Using the Preset Picture Mode].  
1
2
3
4
Video  
1. Mode:  
Custom  
Push ENTER (Down) repeatedly to select APL item.  
2. Contrast  
3. Brightness  
4. Colour  
5. Hue  
6. Sharpness  
7. DNR:  
70  
30  
45  
0
50  
Press ENTER (Left/Right) to select On or Off.  
Weak  
Standard  
On  
Press MENU repeatedly to exit.  
8. Color Temperature:  
9. APL:  
You can use this function to adjust the level automatically so as to obtain better picture effect.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Sound  
Adjusting the Volume  
You may quickly adjust the volume by using VOLUME+ or VOLUME-. The unit also allows you to adjust volume  
through OSD menu as follows.  
Press MENU to display the menu main page.  
1
2
3
Audio  
Push ENTER (Up/Down) repeatedly to display Audio menu page.  
1. Volume  
2. Balance  
3. Equalizer:  
4. 120 Hz  
34  
0
Custom  
Press ENTER to access.  
The Volume item will be highlighted automatically.  
0
0
0
0
0
5. 500 Hz  
6. 1.5 kHz  
7. 5 kHz  
8. 10 kHz  
9. HP Volume  
Push ENTER (Left/Right) to adjust the volume.  
4
5
Press MENU to exit.  
20  
Adjusting the Sound Balance  
Repeat steps 1~3 in [Adjusting the Volume].  
1
Audio  
Push ENTER (Down) repeatedly to select Balance item.  
1. Volume  
2. Balance  
3. Equalizer:  
4. 120 Hz  
34  
0
Custom  
2
3
Push ENTER (Right) to decrease the left speaker volume;  
Push ENTER (Left) to decrease the right speaker volume.  
0
0
0
0
0
5. 500 Hz  
6. 1.5 kHz  
7. 5 kHz  
8. 10 kHz  
9. HP Volume  
Press MENU to exit.  
4
20  
Adjusting the Headphone Volume  
Repeat steps 1~3 in [Adjusting the Volume].  
1
Audio  
Push ENTER (Down) repeatedly to select HP Volume item.  
2
3
1. Volume  
2. Balance  
3. Equalizer:  
4. 120 Hz  
34  
0
Custom  
Push ENTER (Left/Right) to adjust the headphone volume.  
0
0
5. 500 Hz  
6. 1.5 kHz  
7. 5 kHz  
8. 10 kHz  
9. HP Volume  
0
0
0
20  
Press MENU to exit.  
4
Adjusting Equalizer  
The unit provides a Five-Band Equalizer for you to enjoy a high-quality sound. You may select the preset sound  
effects according to different situations or customise the sound effect by yourself.  
Audio  
Repeat steps 1~3 in [Adjusting the Volume].  
1
2
3
1. Volume  
2. Balance  
3. Equalizer:  
4. 120 Hz  
34  
0
Custom  
Push ENTER (Down) repeatedly to select Equalizer item.  
0
0
0
0
0
Push ENTER (Left/Right) to select.  
5. 500 Hz  
6. 1.5 kHz  
7. 5 kHz  
8. 10 kHz  
9. HP Volume  
There are three preset sound effects (Live, Pop and Rock) for your  
choice according to different situations or you may customise the  
sound effect as follows.  
20  
Push ENTER (Down) repeatedly to select 120Hz, 500Hz, 1.5KHz,  
5KHz or 10KHz.  
4
Audio  
1. Volume  
2. Balance  
3. Equalizer:  
4. 120 Hz  
34  
0
Custom  
Push ENTER (Left/Right) to adjust according preference.  
5
6
0
0
0
0
0
Press MENU to exit.  
5. 500 Hz  
6. 1.5 kHz  
7. 5 kHz  
8. 10 kHz  
9. HP Volume  
20  
Note:  
You may quickly select the preset sound effects by using the S.MODE button.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Sound (continued)  
Stereo/Bilingual Selection  
You can quickly select sound multiplex mode by using the STEREO button on the remote control.  
NICAM Broadcast Selection  
This enables the selection of the reception mode when receiving a NICAM signal. To let you enjoy NICAM broadcasting,  
this TV set receives NICAM system stereo, bilingual, and monaural broadcasts.  
Stereo  
When the TV set is receiving a stereo broadcast, press the STEREO button to select NICAM Stereo or FORCE Mono.  
When Force Mono is selected, the TV sound is output monaurally.  
Bilingual  
When the TV set is receiving a bilingual program, press the STEREO button to select NICAM Dual1, NICAM Dual2  
or Force Mono.  
IGR (German stereo system) Broadcasts  
This enables the selection of the reception mode when receiving an IGR signal. To let you enjoy IGR broadcasting, this  
TV set receives IGR system stereo and bilingual broadcasts.  
Stereo  
When the TV set is receiving a stereo broadcast, press the STEREO button to select FM/AM Stereo or Force Mono.  
When Force Mono is selected, the TV sound is output monaurally.  
Bilingual  
When the TV set is receiving bilingual program, press the STEREO button to select FM/AM Dual1 or FM/AM Dual2.  
Note:  
When there is no input signal, the unit mutes the sound automatically, the [Audio] menu page can not be accessed  
and all operations correlative with audio will be denied.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting System  
Setting Colour System  
Press MENU to display the menu main  
1
Program  
Push ENTER (Up/Down) repeatedly to display Program menu page.  
Press ENTER to access.  
2
3
4
5
6
19  
1. Program No:  
2. Program Name:  
3. Locked:  
Off  
Off  
Off  
4. Favourite:  
5. Skip:  
Push ENTER (Down) repeatedly to select Colour System item.  
Push ENTER (Left/Right) to select a proper colour system.  
Press MENU repeatedly to exit.  
0
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
AUTO  
D/K  
320.25 MHz  
Setting Sound System  
Program  
Repeat steps 1~3 in [Setting Colour System].  
1
2
3
4
19  
1. Program No:  
2. Program Name:  
3. Locked:  
4. Favourite:  
5. Skip:  
6. Fine Tuning:  
7. Colour System  
8. Sound System:  
9. Auto Search:  
0. Manual Search:  
Push ENTER (Up/Down) repeatedly to select Sound System item.  
Off  
Off  
Off  
Push ENTER (Left/Right) to select a proper sound system.  
0
AUTO  
D/K  
Press MENU repeatedly to exit.  
320.25 MHz  
Changing Screen Aspect Ratio  
Press MENU to display the menu main page.  
1
Screen  
Panorama  
Push ENTER (Up/Down) repeatedly to display Screen menu page.  
1. Display Mode:  
2. PIP Mode:  
3. MultiWin Mode:  
4. H Size  
5. H Position  
6. V Position  
7. Phase  
2
3
Off  
Off  
0
0
0
31  
Press ENTER to access.  
The Display Mode item will be highlighted automatically.  
8. Auto Sync  
9. Default  
Push ENTER (Left/Right) to select a desired screen ratio.  
4
Press MENU repeatedly to exit.  
5
You may also use the ZOOM button to select the screen aspect ratio.  
Auto --- For Auto signal format. This mode displays the picture format as transmitted by the broadcaster.  
16:9 --- For 16:9 signal format. This mode displays a 16:9 aspect ratio picture.  
14:9 --- For 14:9 signal format. This mode displays 14:9 aspect ratio picture.  
4:3 --- For 4:3 signal format. This mode displays a 4:3 picture at its standard 4:3 size without any stretching.  
Panorama --- In this mode the picture is progressively stretched towards each side of the screen.  
Zoom --- For 4:3 letterbox signal format. This mode stretches the picture horizontally and crops the top and  
bottom black bars of the picture  
Selecting Menu Language  
Option  
Press MENU to display the menu main page.  
1
Off  
1. Child Lock:  
Push ENTER (Up/Down) repeatedly to display Option menu page.  
Press ENTER to access.  
2. Change Password  
3. WSS:  
4. APS:  
5. Program Area:  
6. Menu Language:  
7. Menu Background:  
8. Blue Screen:  
2
3
4
5
6
Off  
Off  
Others...  
English  
Opaque  
On  
Push ENTER (Down) repeatedly to select Menu Language item.  
Push ENTER (Left/Right) to select a desired menu language.  
Press MENU repeatedly to exit.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting System (continued)  
Setting Menu Background  
Option  
Repeat steps 1~3 in [Selecting Menu Language].  
Push ENTER (Down) repeatedly to select Menu Background item.  
Push ENTER (Left/Right) to select.  
1
2
3
4
Off  
1. Child Lock:  
2. Change Password  
3. WSS:  
Off  
Off  
Others...  
English  
Opaque  
On  
4. APS:  
5. Program Area:  
6. Menu Language:  
7. Menu Background:  
8. Blue Screen:  
Press MENU repeatedly to exit.  
Setting WSS  
Option  
Repeat steps 1~3 in [Selecting Menu Language].  
1
Push ENTER (Down) repeatedly to select WSS item.  
Off  
2
1. Child Lock:  
2. Change Password  
3. WSS:  
Push ENTER (Left/Right) to select On or Off.  
3
Off  
Off  
Others...  
English  
Opaque  
On  
4. APS:  
Press MENU repeatedly to exit.  
4
5. Program Area:  
6. Menu Language:  
7. Menu Background:  
8. Blue Screen:  
Note:  
If the [WSS] (Wide screen signalling) function is changed from OFF  
to ON, the unit can identify the WSS signal.  
Setting Blue Screen  
Repeat steps 1~3 in [Selecting Menu Language].  
1
2
3
4
Option  
Push ENTER (Down) repeatedly to select Blue Screen item.  
Off  
1. Child Lock:  
2. Change Password  
3. WSS:  
Push ENTER (Left/Right) to select On or Off.  
Off  
Off  
Others...  
English  
Opaque  
On  
4. APS:  
Press MENU repeatedly to exit.  
5. Program Area:  
6. Menu Language:  
7. Menu Background:  
8. Blue Screen:  
If the [Blue Screen] is set to [On], the unit displays a blue  
background when there is no input signal.  
In TV mode, when there is no input signal for a certain time, the  
TV set auto goes to STANDBY mode.  
Setting Sleep Timer  
You can quickly set the sleep timer by using the SLEEP button on the remote control. Press this button  
repeatedly to select a desired value.  
Setting Timer  
With the unit working, press TIMER to display the timer setting menu.  
1
2
Timer  
Current Time  
Off Time  
10:04  
Push ENTER (Down) repeatedly to select Current Time, Off Time or  
On Time.  
01:20  
12:30  
1
On Time  
Press ENTER to start setting time  
Push ENTER (Left/Right) to toggle between hour and minute, push  
ENTER (Up/Down) to adjust.  
On Prog.  
3
On Volume  
15  
Press MENU to return back to the upper-level menu.  
4
Note:  
If you want to cancel the Off-Timer or On-Timer function, please set the [Off-Time] or [On Time] to [--:--].  
Setting On Program and On Volume  
With the unit working, press TIMER to display the timer setting menu.  
1
2
3
Timer  
Current Time  
Off Time  
10:04  
Push ENTER (Down) repeatedly to select On Prog. or On Volume.  
01:20  
12:30  
1
Push ENTER (Left/Right) to adjust.  
On Time  
On Prog.  
In Standby mode, the TV set automatically turns on at the preset  
time and broadcasts the preset program in preset volume.  
Note:  
On Volume  
15  
Before setting the On Prog. and On Volume, please set the On Time first.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing Screen Layout  
Selecting Screen Layout  
Press MENU to display the menu main page.  
Push ENTER (Up/Down) repeatedly to display Screen menu page.  
Press ENTER to access.  
Screen  
1
2
3
4
5
6
Panorama  
1. Display Mode:  
2. PIP Mode:  
3. MultiWin Mode:  
4. H Size  
5. H Position  
6. V Position  
7. Phase  
Off  
Off  
0
0
0
31  
Push ENTER (Down) repeatedly to select MultiWin Mode menu.  
Press ENTER (Left/Right) to select.  
8. Auto Sync  
9. Default  
Press MENU repeatedly to exit.  
Note:  
You may quickly select screen layout by using the M.WIN button.  
The [9 Windows] is for TV mode only.  
The sound can not be output from the headphone jack when in [4 Windows] and [9 Windows].  
POP 4:3  
The POP 4:3 feature splits the screen into a double window that  
allows you to watch two programs at the same time.  
Note:  
Main Window  
Main Window  
Main Window  
POP Window  
You may use the POP button to quickly turn on or off the POP feature.  
POP Full  
When this item is selected, one main window and one scanning  
windows display on the screen.  
POP Window  
4 Windows  
When this item is selected, one main window and three scanning  
windows display on the screen.  
Scanning  
Window  
9 Windows  
Scanning  
Window  
When this item is selected, the screen displays 9 scanning windows.  
This function enables you to quickly browse all active channel.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIP Operation  
Viewing the Picture-in-Picture  
This unit includes a two-tuner Picture-in-Picture (PIP) feature. This allows you to watch two live broadcasts  
simultaneously, one in the full size "main" picture and one in a smaller "window" picture. The main window program can  
come from a TV broadcast or other external source, while the PIP window always displays TV program.  
With the unit working in single full screen, press MENU to display  
the menu main page.  
1
Screen  
Press ENTER (Up/Down) repeatedly to display Screen menu page.  
2
Panorama  
1. Display Mode:  
Off  
Off  
0
2. PIP Mode:  
3. MultiWin Mode:  
4. H Size  
5. H Position  
6. V Position  
7. Phase  
Press ENTER to access.  
3
4
5
Press ENTER (Down) to select PIP Mode item.  
0
0
31  
Press ENTER (Left/Right) to select.  
Off -Turn off PIP feature.  
8. Auto Sync  
9. Default  
Up-Left -Turn on PIP feature and display the PIP window on up-left  
comer of the screen.  
Up-Right -Turn on PIP feature and display the PIP window on up-  
right corner of the screen.  
Main Window  
Down-Right -Turn on PIP feature and display the PIP window on  
down-right corner of the screen.  
Down-Left - Turn on PIP feature and display the PIP window on  
down-left corner of the screen.  
Centre -Turn on PIP feature and display the PIP window on centre  
of the screen.  
PIP  
Window  
Press MENU repeatedly to exit.  
6
Note:  
You may use the PIP button to quickly turn on or off the PIP feature.  
Using the PIP-POS button  
Press the PIP-POS button to quickly select the position for PIP window.  
Main frame  
PIP frame  
Using the ACT.WIN button  
Press this button to select either the main window or PIP window in  
order to perform some operations for the PIP window individually. The  
unit allows you to apply many operations to the PIP picture such as  
adjusting volume, changing channels adjusting picture etc.  
Note:  
Many but not all adjustments and settings can be applied to the PIP window when the PIP window is selected.  
The PIP audio is only output through the headphone jack.  
The NICAM/IGR broadcasts can not be applied to the PIP window.  
Swap the Contents of the PIP Image and Main Image  
Press the PIP button to display the PIP window.  
1
Press the SWAP button to swap the contents of the PIP window  
and main window.  
2
Note:  
The Swap function does not work unless the signal source of the main window is set to TV Mode.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjustments in D-Sub Mode  
With working in D-Sub mode, this unit allows you to perform many adjustments.  
Adjusting Image Horizontal Size  
Press MENU to display the menu main page.  
Screen  
1
Panorama  
Push ENTER (Up/Down) repeatedly to display Screen menu page.  
Press ENTER to access.  
1. Display Mode:  
2. PIP Mode:  
3. MultiWin Mode:  
4. H Size  
5. H Position  
6. V Position  
7. Phase  
2
3
4
5
6
Off  
Off  
0
0
0
31  
Push ENTER (Down) repeatedly to select H Size item.  
Push ENTER (Left/Right) to adjust until you are satisfied.  
Press MENU repeatedly to exit.  
8. Auto Sync  
9. Default  
Changing the Position of Image  
After connecting the unit to your PC, adjust the position of the screen if it is not well-aligned.  
Screen  
Repeat steps 1~3 in [Adjusting Image Horizontal Size].  
1
Panorama  
1. Display Mode:  
Off  
Off  
0
Push ENTER (Up/Down) to select H Position or V Position.  
Push ENTER (Left/Right) to adjust until the picture is well-aligned.  
Press MENU to exit.  
2. PIP Mode:  
3. MultiWin Mode:  
4. H Size  
5. H Position  
6. V Position  
7. Phase  
2
3
4
0
0
31  
8. Auto Sync  
9. Default  
Adjusting the Phase  
Screen  
Repeat steps 1~3 in [Adjusting Image Horizontal Size].  
1
2
3
4
Panorama  
1. Display Mode:  
2. PIP Mode:  
3. MultiWin Mode:  
4. H Size  
5. H Position  
6. V Position  
7. Phase  
Off  
Off  
0
0
0
31  
Push ENTER (Down) repeatedly to select Phase.  
Push ENTER (Left/Right) to adjust until the picture is well-aligned.  
8. Auto Sync  
9. Default  
Press MENU repeatedly to exit.  
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience  
blurring, you can obtain a clearer image by adjusting the [Phase] item.  
Adjusting the Screen Automatically  
Screen  
Repeat steps 1~3 in [Adjusting Image Horizontal Size].  
1
2
3
Panorama  
1. Display Mode:  
2. PIP Mode:  
3. MultiWin Mode:  
4. H Size  
5. H Position  
6. V Position  
7. Phase  
Off  
Off  
0
0
0
31  
Push ENTER (Down) repeatedly to select Auto Sync item.  
Press ENTER to confirm and press MENU repeatedly to exit.  
8. Auto Sync  
9. Default  
You may quickly adjust the screen by using the AUTO button directly  
The unit automatically adjusts phase or position, etc.  
Loading Default Setting  
Screen  
Repeat steps 1~3 in [Adjusting Image Horizontal Size].  
1
2
3
Panorama  
1. Display Mode:  
2. PIP Mode:  
3. MultiWin Mode:  
4. H Size  
5. H Position  
6. V Position  
7. Phase  
Off  
Off  
0
0
0
31  
Push ENTER (Down) repeatedly to select Default item.  
Press ENTER to confirm and press MENU repeatedly to exit.  
8. Auto Sync  
9. Default  
Then the value of H Size. H Position and V Position etc. will be  
restored to the default value.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext  
What Is Teletext?  
Teletext broadcasts pages of information and entertainment to specially equipped television sets.  
Your System receives Teletext signals broadcast by a TV network, and decodes them into graphical format  
for viewing. News, weather and sports information, stock exchange prices and programme previews are  
among the many services available.  
Teletext Mode  
Teletext is turned on/off with the TEXT button on the remote control unit. You can  
operate your System in Teletext mode directly by inputting commands with the  
remote control unit.  
Turning On or Off Teletext  
Select a TV channel providing the Teletext program.  
Press the TEXT button to display the Teletext with black background.  
Press the TEXT button again to switch back to TV screen.  
TELETEXT  
Button Functions  
ENTER (Up/Down)  
Changing Teletext pages.  
VOLUME+ or VOLUME-  
Adjusting volume.  
MUTE  
Muting the sound.  
Colour (RED/GREEN/YELLOW/BLUE)  
You can select a group or block of pages displayed in the coloured brackets at the  
bottom of the screen by pressing the corresponding colour (RED/GREEN/  
YELLOW/BLUE) on the remote control unit.  
0-9  
Directly select any page by using 0-9.  
AUTO  
MIX  
Press this button to display the Teletext on the screen with transparent background  
while viewing the TV program simultaneously.  
REVEAL  
Press the button to reveal hidden information such as an answer to a quiz. Press  
the button again to hide the information.  
SIZE  
Press the button to expand the top half of the display. Press it again to expand the  
bottom half of the display. Press it once more to resume normal size.  
HOLD  
Press the button to stop updating Teletext pages automatically. Press it again to  
release hold mode.  
UPDATE  
Press the button to view the updated teletext page.  
Display the TV picture on the screen while waiting for the new teletext page. The characters "???" will appear at  
the top of left corner of the screen. Then you can input a desired page number. When the update page is available,  
then the characters "???" will change to the page number.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Before calling for repair service, check the following items for possible remedies to an  
encountered symptom.  
Symptoms  
Check item  
"Ghost" or double images  
This may be caused by obstruction to the antenna due to high rise buildings  
or hills. Using a highly directional antenna may improve the picture.  
No power  
No picture  
Check that the AC power cord is plugged into the mains socket.  
Unplug the power cord, wait for 60 seconds. Then reinsert plug into  
the mains socket and turn on the unit again.  
Check antenna connections at the rear of the unit to see if it is properly  
connected to the unit.  
Possible broadcast station trouble. Try another channel.  
Adjust the contrast and brightness settings.  
Select a correct input.  
Is a non-compatible signal being input?  
Increase the VOLUME.  
Check that the unit is not muted.  
Good picture but no sound  
Good sound but poor colour  
Poor picture  
Adjust the contrast, colour and brightness settings.  
Sometimes, poor picture quality occurs when having activated an S-VHS  
camera or camcorder connected and having connected another peripheral  
at the same time. In this case, switch off one of the other peripherals.  
Check whether the room is too bright.  
This may be caused by electrical interference (e.g. hair dryer, nearby  
neon lights, etc.)  
Horizontal dotted line  
Turn off the equipment.  
Check whether the batteries are working. Replace if necessary.  
Clean the remote control sensor lens on the unit.  
Do not use the remote control under strong or fluorescent lighting.  
The batteries should be inserted with polarity (+, -) aligned.  
Television not responding to  
remote control  
Snowy picture and noise  
Check the aerial connection.  
No stable or not  
synchronised D-Sub picture  
Check if you have selected the correct D-Sub mode in your PC.  
No output from one of the speakers  
Controls buttons do not work  
Adjust Balance in the Audio menu.  
Unplug the power cord, wait for some seconds. Then re-plug the power  
cord and turn on the unit again.  
Do not use in hot and cold rooms (location)  
When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is no  
a malfunction, and the unit will recover when the temperature returns to normal.  
t
Do not leave the unit in a hot or cold location. Also, do not leaves the unit in a location exposed to direct sunlight or near a heater, as  
this may cause the cabinet to deform and the LCD panel to malfunction.  
(Storage temperature: 00C to +500C; Working temperature: 50C to 400C.)  
Note:  
If your problem is not solved, restart your TV by turning it off and then on again once.  
Never attempt to repair a defective TV yourself.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
LCD Display panel information  
Note:  
The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is  
not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time.  
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.  
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.  
This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible  
LCD panel deterioration can be limited by observing the following steps:  
A. Reduce the brightness/contrast setting to a minimum viewing level.  
B. Do not display the fixed image for extended periods of time.  
C. Turn the power off when not in actual use.  
Cleaning and Maintenance  
To clean this unit, wipe with a soft, dry cloth.  
If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.  
Use eyeglass cleaner to remove stubborn dirt from the LCD.  
Never use alcohol, paint thinner or benzine to clean this unit.  
Before using achemically treated cloth, read the instructions that came with the cloth carefully.  
CAUTION:  
If water or similar substances get inside the monitor liquid crystal panel surface, a malfunction may result.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
604-L32W5S3-03  
Ver. 1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Impact Driver 2653 20 User Manual
Minolta Printer PI4700E User Manual
Murray Lawn Mower 425015x92A User Manual
Navman GPS Receiver iCN700 User Manual
NETGEAR Network Router FVG318NA User Manual
NuTone Ventilation Hood NSP130 User Manual
Omron Respiratory Product ME C28P User Manual
Oster Refrigerator OR03SCGBS User Manual
Panasonic Drill EY6405 User Manual
Panasonic DVD Player DVD F85 User Manual