OWNER'S MANUAL
81CM CORDLESS REMOTE LCD TELEVISION & MONITOR
MODEL: TFTV836BK
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS AND CAUTIONS
Caution
Carry the set requires two or more people
Caution
Do not drop or push objects into the television
cabinet slots or openings. Never spill any kind
of liquid on the television receiver.
Caution
Do not insert anything in the ventilation holes.
If metal or something flammable enters, it may
result in fire or electric shock.
Caution
Do not place objects on this unit. it may damage
the screen surface
Caution
Do not squash power supply cord under the
television receiver.
Caution
Do not throw anything at the set. The screen
glass may explode by impact and cause serious
injury.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Cautions
Caution
Never stand on, lean on or push suddenly the
television or its stand. You should pay special
attention to children. Serious injury may result
if it should fall.
Caution
Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an
individual, and damage to the television, may
result it should fall.
Caution
When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the AC power cord from the AC outlet.
Caution
Do not block the ventilation holes in the back
cover. Adequate ventilation is essential to prevent
failure of electrical component.
Warning
Avoid exposing the television receiver to direct
sunlight and other source of the heat.
Do not stand the television receiver directly on
other produces which give off heat. e.g. video
cassette players or Audio amplifiers.
Do not place naked flame sources, such as lighted
candle on the television. Do not expose the LCD
screen surface to the sun, it may damage the
screen surface.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Cautions
Warning
Take care not to connect many appliances to the
same mains socket as this could result in fire or
electric shock. Do not place objects on this unit.
it may damage the screen surface.
Warning
High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set. Refer servicing to qualified
service personnel.
Warning
To prevent fire or electrical shock hazard, Do not
expose the television receiver to rain or moisture.
Warning
For you own safety, do not touch any part of the
set, main lead or aerial lead during lighting storms.
Caution
If the television is to be built into a Compartment
or similarly enclosed, the minimum distances
must be maintained.
Heat build-up can reduce the service life of your
television, and can also be dangerous.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
2
5
6
7
9
9
9
9
Warnings and Cautions ......................................................................................................
Table of Contents ...............................................................................................................
Front/Back Panel Diagram .................................................................................................
Systems Connection ..........................................................................................................
Remote Controller ..............................................................................................................
Using the Remote Control ..................................................................................................
Remote Control Instruction ................................................................................................
Battery Installation .............................................................................................................
10
10
10
20
21
22
23
OPERATION INTRODUCTIONS .......................................................................................
Tuner on the LCD TV .........................................................................................................
Main Menu .........................................................................................................................
Teletext (optional) ...............................................................................................................
Nicam (optional) .................................................................................................................
HELP ..................................................................................................................................
SPECIFICATION ................................................................................................................
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front / Back Panel Diagram
1. LCD TV Button:
STANDBY: Turn on/off
LCD TV
VOL+/-: Adjust Volume
CH+/-: Select channel
MENU: Into or exit from menu (Use
CH+/- button select item. use VOL+/•
button to adjust item)
VOL -
VOL +
CH -
SOURCE: Source select
CH +
MENU
SOURCE
STANDBY (on/off) Button
2. BACK PANEL:
3. Power Switch: Turn on/off
LCD TV main power
4. Power Socket
5. VGA Input
6. S-VIDEO Input
7. Audio Input (YPbPr 2)
8. Audio Input (Video 2 /S-VIDEO)
9. YPbPr 2 Input
10. VIDEO 2 Input
11. HDMI Input
12. YPbPr 1 Input
13. VIDEO 1 Input
14. Audio Input (YPbPr 1)
15. Audio Input (Video 1)
16. PC Audio Input
17. ANTENNA
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEMS CONNECTIONS
CONNECTION:
INPUT/OUTPUT JACK AS FOLLOWS: ANT Input, VIDEO Input. S-VIDEO Input,
VGA Input, PC (audio) Input. HDMI, Y Pb Pr 1 Input, Y Pb Pr2 Input
CONNECT POWER: Connect the 100-240V~50/60Hz power input of the LCD TV.
Notice:
1. Must connect properly, especially the plug should be inserted to the bottom.
2. This picture is only for your reference.
A: VGA, PC (AUDIO) IN, HDMI, S-VlDEO, ANTENNA CONNECT
HDMI output
TV signal output
DVD VIDEO output
VIDEO S-VIDEO
L
R
HDMI
AUDIO OUTPUT
TV ANT
TV ANT
ANTENNA
100-240V 50/60Hz
INPUT
PC
AUDIO CABLE
VGA OUTPUT
DVD VGA
OUTPUT
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONNECTION
B: Y Pb Pr 1, Y Pb Pr 2, VIDEO 1, VIDEO 2, CONNECT and AUDIO CONNECT
VIDEO 1 AUDIO
INPUT
Y Pb Pr 2 AUDIO
INPUT
100-240V 50/60Hz
INPUT
DVD Y Pb Pr output 2
DVD VIDEO 2
DVD Y Pb Pr output 1
DVD VIDEO 1
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
Battery Installation
Using the Remote Control
Remove the battery compartment lid on the
rear of the remote control by sliding the lid
down, then off. Put two AAA batteries inside
the battery compartment with their + and •
ends aligned as indicated.
Unless stated otherwise, the remote control
can operate all the features of the LCD TV
Always point the remote control directly at
the remote sensor in the front of the LCD TV.
Do not mix old and new batteries or different
types of batteries. Replace the battery com•
partment lid. Slide the lid until you hear it
click into place.
Remote control instruction
1. Mute: Mute ON/OFF
2. 0-9: Digital key
3. HDMI: Switch to the HDMI mode
4. FOUR COLOUR BUTTONS:
There are four colour buttons in the last row of
the remote controller. They are red, green,
yellow and blue from left to right. By pressing
these buttons, you can enter relative pages
quickly which is is indicated in the last row of
current teletext page.
1
2
29
28
27
26
5. 16:9: Adjust aspect setting
6. TXT/CC: Display TELETXT signal, mixing
teletext page with TV signal, close teletext
7. PICTURE: Call out picture mode menu.
8. and adjust the picture mode
9. VOL-: Volume down
SOUND: Call out sound mode menu. and
adjust the sound mode.
10. LUCIDTY: Switch to the Teletext with
mix mode
11. INDEX: Request index page
12. Cancel: Change display size
13. HOLD: Toggle hold on or off for current
display page
14. SIZE: Remove the Teletext & program
15. REVEAL: Show the hidden words
16. SUBPAGE: Some page attach sub-page,
press "SUB-PAGE" button to view the
sub-pages.
HDMI
25
24
3
4
5
6
23
22
21
7
8
9
20
19
18
17
16
10
11
12
13
15
14
17. CH-: Channel down
18. EXIT: Exit the menu
19. OK (
choose.
): to confirm that what you
20. VOL+: Volume up
21. CH+: Channel up
22. MENU: The button to enter into or exit
from menu
23. Display: Call out info menu
24.
: Switch to the last channel
25. SOURCE: Input source selection
26. STILL: Pause picture
27. NICAM/A2: Nicam function
28. Sleep: Set the sleep time
29. Power: Turn the power on when pressed
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION INTRODUCTIONS
7. AFT
a. This item is to change the AFT value of the current program.
b. The selection of control is On, Off. or a value between (-15, +15).
c. When the AFT option of the current program is On, system automatically track the current
program frequency by monitoring AFT level. When this option is Off, this function is disabled.
When set to a number, the frequency departure from the searched frequency.
8. Label
a. This menu is to change the program label of the current program.
b. Press the
c. Press the
button to change character position.
button to change character.
There are 7 character positions. The available characters are:
'A'-'Z' '(' ')' '*' '+', ',' '-' 'o' '/' '0'-'9'.
9. Program Edit
a. This menu is to edit the program storage.
b. Press the
button to select program.
c. Press the button to choose one program to be moved.
After user chooses a program, the menu changes like this:
a. The chosen program is moved to right, so user can now:
b. Press the
c. Press the
button to select a position.
button to insert the chosen program and swap two programs.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION INTRODUCTIONS
Picture Mode Menu
Dynamic
The Picture Mode Menu should appear at the left bottom part of the screen.
Use the following keys to navigate through the picture mode menu:
a. Use PlC MODE button to call out picture mode menu, and adjust the picture mode.
b. Press the
/EXIT button to exit picture mode menu.
c. The selection should be Soft, Standard, User and Vivid.
When user changes anyone of Contrast, Brightness, Saturation and Sharpness settings, the
picture mode changes into Memory automatically and the current picture settings are stored
into EEPROM memory part.
Sound Mode Menu
Theater
The Sound Mode Menu should appear at the left bottom part of the screen.
a. Use SND MODE button to call out sound mode menu, and adjust the sound mode.
b. Press the
/EXIT button to exit sound mode menu.
c. The selection should be User, Theater, Music and News.
When user changes any one of Bass and Treble settings. The sound mode changes into Memory
automatically and the current sound settings are stored into EEPROM memory part.
Info Menu
The Info Menu should appear at the left top part of the screen.
The lnfo Menu appears when:
a. Signal changes.
b. TV channel changes.
c. Source changes.
d. User presses the DISPLAY button to call out info menu.
User can press the
/EXIT button to exit info menu.
Source Switch Menu
Source Select
TV
Y Pb Pr1
Y Pb Pr2
VIDEO 1
VIDEO 2
S-VIDEO
VGA
HDMI
a. Press SOURCE button to call out source switch menu.
b. Use
button to select source.
c. Press the
button to switch into the corresponding source, or press EXIT button to
exit source switch menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION INSTRUCTIONS
TELETEXT (Optional)
Teletext features may vary depending on the Broadcasting Companies and is only available
if the channel selected is transmitting Teletext. Pressing the Picture button whilst in Teletext
operation will switch the current status to TV When in Teletext mode, the volume may still
be altered to desired listening level, after pressing VOL+/VOL- or MUTE button.
Page Selection
Pages can be selected in following ways:
By entering the page number, using 0-9 button on the remote control.
Size Button
Press Size to change display size: normal => large top => large button => normal.
Reveal Button
Press Reveal to reveal hidden words e.g. Quiz page answers. Press again to hide.
RED / GREEN / YELLOW / CYAN Buttons these four buttons correspond to the differently
coloured subjects.
Hold Button
Press Hold to remain the Teletext page when viewing multi-page information Press again to
return to automatic page update.
Index Button
Press Index to return to the main index page.
Depending on the way information is transmitted, this may have to be pressed more than
once to return to the main index page.
Subpage Button
When Teletext information exceeds more than one page, it may take some time for the
automatic changing of the sub pages to reach the sub page you require.
It is possible to enter your required sub page and continue watching the normal programme
until the correct sub page is found.
Select the required page number using buttons 0-9.
If the top of the page indicates that sub pages are being transmitted yet the page dose not
change, then the number at the top of the page is there to indicated that the broadcaster has
updated the page's contents, there are no sub pages.
Press Subpage, page number/----will be displayed at the Button right of the screen.
Enter desired sub page number before the page number/----disappears. To select page 6
enter 0, 0,0 and 6.
Text Button
Press Text to enter Teletext mode and only the text page can be visible.
Lucidity Button
Press Lucidity to enter Teletext mode and both the TV picture and text page can be visible.
Cancel Button
Press Cancel to turn off the Teletext.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Introductions
NICAM (Optional)
Press the NICAM/A2 button:
Usually set to stereo to provide the best reproduction, but if reception deteriorates or if the
service is not available then switch to Mono.
Mono (MI) and (M2) can also be selected if a mono signal is being transmitted.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Help
Check power supply and cable connection
Make sure the power button is ON
Check for correct setting for brightness and
contrast ratio
Check audio cable and audio volume
Make sure TV was not muted
No picture and no sound
Has picture but no sound
Adjust colour setting
Picture in black and white
or colour problem
Check if the TV tuner format selection is
correct
Picture or sound interference
No signal display
Check if TV is too close to other electronic
devices for potential interference.
Check if selected input source and connection
Check if the selected input source is working
Check battery
Remote control problem
Remote does not aim at TV remote signal
receiver
Check if there is obstacle between remote and
TV
Remote is too far away from TV or the angel is
too sharp
Adjust antenna location and angel for better
reception
Snowy picture with noise
Check antenna location and angel for better
reception
Check PC or the connected device for correct
frequency and bandwidth
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
81cm LCD
LCD:
Horizontal view angle: 176
Vertical view angle: 176
Vertical frequency: 60/75Hz
640x480, 800x600, 1024x768
(best resolution 1024x768)
PAL B/G,D/K
View angle:
PC input:
Resolution:
TV system:
Channel amount:
Input:
100
HDMI, VGA (PC), YPbPr 1, YPbPr 2,
VIDEO 1, VIDEO 2, S-VIDEO, PC Audio,
ANTENNA
10W x 2 (Impedance 8ohm)
75 ohm
Speaker:
ANTENNA:
100-240V~50/60
160W
Remote controller, common AAA battery
Power supply:
Power Consumption:
Accessories
This user manual is for reference only. Specifications are subject to change without notice.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
|