Palsonic Flat Panel Television TFTV380 User Manual

OWNER'S MANUAL

38CM CORDLESS REMOTE LCD TV/MONITOR

MODEL: TFTV-380

Type Tested

Electrical

Safety

AS/NZS 3250 Lic 3250

Standards Australia

APP No: N17340

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL: (02) 9313 7111

FAX: (02) 9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Cautions

When any unusual situation occurs, turn off the power supply at once and

remove the plug from the wall outlet. Contact a qualified service department

in your local area.

Water and moisture - Do not use this product near water - for example, near a

bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool, and the like. Do not use immediately after moving from a low

temperature to high temperature environment, as this causes condensation,

which may result in fire, electric shock, or other hazards.

Heat sources - Keep the product away from heat sources such as radiators

heaters, stoves other heat generating products (including amplifiers).

requirement of environment temperature;

-20⁰C~50⁰C for storage; 0⁰C~40⁰C for working.

The vents and other openings in the cabinet are designed for ventilation. Do not

cover or block these vents and openings since insufficient ventilation can cause

overheating and/or shorten the life of the product.

Do not place the product on a bed, sofa, rug or other similar surface, since they

can block ventilation openings.

This product is not designed for built-in installation; do not place the product in an

enclosed place such as a bookcase or rack, unless proper ventilation is provided

or the the manufacturer's instructions are followed.

Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Do not place the product on an unstable trolley, stand, tripod or table. Placing

the product on an unstable base can cause the product to fall, resulting in

serious personal injuries as well as damage to the product. Use only a trolley,

stand, tripod, and bracket or table recommended by the manufacturer or sold with

the product.

Download from Www.Somanuals.com. All Manuals Search And Download.

This TV set can be operated on a power of ~240V 50Hz or 12V DC power. You must not

use a power supply of any other type.

When relocating the product placed on a trolley, it must be moved with the utmost

care. Sudden stops, excessive force and uneven floor surfaces can cause the

product to fall from the trolley.

The power cords must be routed properly to prevent people from stepping on

them or objects from resting on them. Check the cords at the plugs and product.

Power supply cords should be routed so that they are not likely to be walked on

or snagged by items placed upon or against them. Pay particular attention to cords

at doors, plugs, receptacles, and the point where they exit from the product.

If the power cord or the plug is damaged contact a qualified service department

for service.

Do not overload wall outlets, extension cords, or convenience receptacles on

other equipment as this can result in a risk of fire or electric shock.

High Voltage exists in this TV set. Do not remove the cover.

In case the product needs replacement parts, make sure that the service person

uses replacement parts specified by the manufacturer, or those with the same

characteristics and performance as the original parts. Use of unauthorised parts

can result in fire, electric shock and/or other danger.

The LCD panel used in this product is made of glass. Therefore, it can break

when the product is dropped or impacted upon by other objects. Be careful not

to be injured by broken glass pieces in case the LCD panel breaks.

Don't try to push anything into the cabinet or place any vessel with water on the

TV set.

For added protection for this television equipment during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna. This will prevent damage to the equipment

due to lightning and power-line surges.

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of controls

Front

SOURCE

CH +

VOL

VOL +

Channel up

Volume down

Volume up

To select input signal

enter into MENU

Channel down

Download from Www.Somanuals.com. All Manuals Search And Download.

Back

Power switch

S-video input

VGA input

PC audio

line in

DC power input

Antenna input

Earphone jack

AV input

(VIDEO, AUDIO L/MONO, R)

Download from Www.Somanuals.com. All Manuals Search And Download.

Identification of controls

(continued)

Remote Control

Power on/Standby

Sound Mute

Auto correct picture

in VGA input mode

Direct channel select

Clock/Timer setting

Signal input select

To enter into MENU

Previous channel

Channel up

On-screen display

Quickly adjust picture

Volume up

Volume down

Sleep timer

Picture mode select

Channel down

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery installation

Effective remote range

Please install the batteries before using the

remote control unit.

Open the battery cover.

Install two "AA" batteries

matching the +/-

polarities of the battery

to the +/- marks.

Notes:

There should be no obstacle between the TV

and the transmitter.

Use the remote control within the effective

range as the above figure.

Replace the battery

cover.

If the remote control does not work, please

check whether the batteries are exhausted

or the polarity is wrong.

When direct sunlight, and incandescent

lamp, fluorescent lamp or any other strong

light shines on the REMOTE SENSOR of the

TV the remote operation may be unstable.

Notes:

When the remote control will not be used

for a long period of time or when the

batteries are worn out, remove the

batteries.

Do not throw the batteries into a fire.

Dispose of used batteries in the specified

manner.

Do not drop, dampen or disassemble the

remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

Antenna installation

Before using this equipment, please connect the AC power adaptor correctly.

Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial

must be used. The exact type and position of the aerial will depend upon your particular area.

Notes:

Turn off the power firstly when you connect a outdoor antenna to the Antenna input terminal.

When installing an outside antenna system, extreme care should be taken to keep from touching

power lines or circuits as contact with them might be fatal.

In thunder and lighting weather, please disconnect the outdoor antenna to avoid thunder/lighting

strike.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting video/audio equipment

Yellow (video)

White (audio L/MONO)

Red (audio R)

To S-video output

To video

output

To audio

outputs

To ANT output

Video equipment

without S-video

terminal

Video equipment

with S-video

terminal

To ANT output

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

(continued)

VGA interface connection

To line in

To VGA input

Equipment with

VGA interface

To line out

To VGA output

Download from Www.Somanuals.com. All Manuals Search And Download.

Elevation adjustment

You can adjust the angle of the LCD TV/Monitor as follows.

The elevation can be adjusted from -5⁰to 90⁰.

-5⁰

90⁰

Download from Www.Somanuals.com. All Manuals Search And Download.

Join to page 13

Menu Introduction

The selected item

displays in white..

Press MENU

button once

Press MENU

button

SOURCE

VOL

VOL +

CH +

Press MENU

button twice

Press MENU

button

Press MENU

button three times

Press MENU

button in PC mode

Note: There is only one MENU page in PC mode.

Join to page 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Join to page 12

In MENU operations, the CH+/- buttons are used to select item upwards or

downwards; the VOL+/- buttons are used to adjust or confirm selected item.

To adjust the picture's brightness.

To adjust the picture's contrast.

To adjust the picture's colour saturation.

To adjust the picture's sharpness.

To adjust the picture's skin colour. (This item is available only in NTSC)

To adjust the back light.

To set blue background.

To select OSD language.

To set the colour system.

To set the sound system.

To adjust the bass

To adjust the treble

To enter into auto search.

To enter into fine tuning menu.

To enter into channel search menu.

To enter into skip setting menu.

To enter into channel edit menu.

To adjust brightness and contrast in VGA input mode,

this adjustment doesn't effect AV or TV mode.

To adjust horizontal and vertical position in VGA input mode to display picture correctly.

To adjust phase and frequency if you can't obtain the best picture by using

AUTO CORRECT button.

To adjust the colour temperature.

(The item switches between User, 9300K, 7300K, 6500K, and 5000K)

To adjust the back light.

Join to page 12

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning On/Off

Turning On

1. Insert the outlet plug of the AC power adaptor into the

DC power input of the unit.

2. Press the power switch and the red indicator lights up,

the TV/MONITOR is in STANDBY mode.

3. Press the SOURCE button on the unit's control panel

or the button on the remote control, the red indicator

turns yellow and the set is turned on.

Notes:

SOURCE

MENU VOL

VOL +

CH +

In TV mode, when there is no TV signal input for about 15

minutes, the set goes to STANDBY automatically. (The Blue

Background item should be set to Enable).

Turning Off

1. If you want to turn off the power completely, press the

power switch.

2. If you want to turn off temporarily, press the button on

the remote control, the set goes to STANDBY and the

indicator turns red.

Notes:

This TV set can automatically turn off by:

1. When there is no TV signal input for about 15 minutes;

2. Sleep timer;

3. Off timer.

Selecting input signal

1. Press the AV button on the remote control or SOURCE

button on the control panel to select input mode. You can

select TV, AV, S-video or PC.

2. If you want to go to TV mode, press AV button repeatedly

until TV picture displays. You can also press 0~9 digit

buttons, CH+ or CH- button to go to TV mode.

3. Press OSD button, the screen displays current mode.

Press again to cancel OSD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel Preset

To enter into PRESET menu

1. Press MENU button repeatedly to display PRESET menu.

2. Press CH+/CH- button to select item.

3. Press VOL+/VOL- button to confirm or adjust selected item.

Auto Search

Please enter into PRESET menu and

select Auto Search item.

Press VOL+ button to start Auto

Search and all active programs will be

memorised.

SOURCE

MENU VOL

VOL +

CH +

During the process of Auto Search,

Channel searching.. VHFL 10

press Menu button will stop Auto

Search.

Notes:

Please confirm the sound system according to your are

before Auto Searching.

Manual Search

Use manual search function if desired channels cannot be

preset or if you would like to preset channels to specific

position numbers one by one.

Use 0~9 digit buttons or CH+/- buttons

to select a position number firstly, then

enter into PRESET menu and select

Channel Search item. Press VOL+

button to enter Channel Search sub-

menu, then press VOL+ or VOL- to

Channel searching.. VHFH 36

start manual search.

Press MENU button can exit Channel

Search sub-menu.

Fine tuning

In area of inferior broadcast conditions where adjustment is

necessary for a better picture and sound, use Fine tuning.

Use 0~9 digit buttons or CH+/- buttons

to select a position number firstly, then

enter into PRESET menu and select

Fine tuning item. Press VOL+ button

to enter into Fine tuning sub-menu,

then press and hold VOL+ or VOL- to

Fine Tuning...

VHFH 36

start Fine tuning.

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel Preset

(continued)

Channel Skipping

You can skip unnecessary channels by using Skip function

when you browse program by CH+/- buttons.

Use 0~9 digit buttons or CH+/- buttons

to select a position number firstly, then

enter into PRESET menu and select

Skip setting item. Press VOL+/-

button to skip this channel. Now this

Skip set

VHFL 10

channel will be skipped when you

browse channels with CH+/- button.

To resume the skipped channel,

please select the skipped channel with

0~9 digit buttons and then enter the

PRESET menu, select Skip setting

item and press VOL+/- to set this item

to Save.

Skip

SOURCE

MENU VOL

VOL +

CH +

Skip set

VHFL 10

Save

Channel Edit

After Auto Channel Preset, this function is for you to edit the

order of programs conveniently according to your favourite.

Please enter into PRESET menu and

select Channel Edit item by CH+/-

buttons, press VOL+/- button to enter

into channel edit sub-menu. Press

CH+/- button to select target channel

number.

Current channel

Change to

VHFL 10

Press MENU button to confirm and

exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Channel Select

Use 0~9 digit buttons and -/-- button

Use 0~9 digit buttons to select one-digit channel number.

Press -/-- button

to display "-".

Press 0-9 direct

channel selector.

SOURCE

MENU VOL

VOL +

CH +

To select two-digit channel:

Press -/-- button

repeatedly to

display "--".

Press 1-9

buttons.

Press 0-9

buttons.

1 -

- -

Using CH+/- button

Press CH+ button, the channel number increases;

Press CH button, the channel number decreases.

Use previous channel button

Press this button to switch between the current channel and

previous channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjustment

Adjusting picture

1. Press MENU button to display Picture menu.

2. Press CH+/- button to select item.

3. Press VOL+/- button to adjust the selected item.

VOL-

darker

weaker

paler

softer

purplish

Item

Bright

VOL+

lighter

stronger

deeper

sharper

greenish

Contrast

Saturation

Sharpness

Color Hue*

Backlight

SOURCE

MENU VOL

VOL +

CH +

Nature, Bright, Soft

* Note: The item Color Hue is for NTSC only.

The adjustment settings are stored in the User mode.

There are three preset picture mode and one User-set

picture mode. Press P.M button to select a picture

mode according to your favourites.

4. Press P.M button to select picture mode.

You can quickly select picture mode by P.M button.

There are four picture mode as: Bright, Nature, Soft and

User mode.

5. You can quickly select Brightness, Contrast, Saturation

or Sharpness item by PIC button and then adjust them

by VOL+/- buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setting

Setting Blue Background

Press MENU button twice to display SYSTEM menu and

select Blue Background item by CH+/- button.

Press VOL+ or VOL- button to select Enable or Disable.

If is you set the Blue Background item to Enable, when there

no signal or the signal is too poor, then a blue background will

appear.

If you set the Blue Background item to Disable, when there is

no signal, the screen displays noisy picture.

Notes:

SOURCE

Only when you set the Blue Background to Enable, the TV set

can turn off automatically when there is no signal for 15 minutes.

MENU VOL

VOL +

CH +

Setting Language

From the SYSTEM menu select Language item by CH+/-

button.

Press VOL+ or VOL- button to select English or Chinese.

Setting Color Sys

From the SYSTEM menu select Color Sys item by CH+/-

button. Press VOL+ or VOL- button to select a correct colour

system according to your area, or you can select AUTO.

Setting Sound Sys

From the SYSTEM menu select Sound Sys item by CH+/-

button.

Press VOL+ or VOL- button to select a correct sound system

according to your area.

Setting sound effect

From the SYSTEM menu select Sound

Set item by CH+/- button.

Press VOL+ button to enter into sound

effect sub-menu. Select Bass or Treble

item by CH+/- and adjust by VOL+/-

buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Functions

Use MUTE button

Press button to mute the sound. If

you want to cancel sound muting, you

can press this button again or press

VOL+/- buttons.

SOURCE

MENU VOL

VOL +

CH +

Use CLOCK button

Press the CLOCK button, the CLOCK

menu appears. Use CH+/- to select hour

or minute (the select item displays in

blue), use VOL+/- to adjust the time.

Press the CLOCK button twice, the Turn

on menu appears. Use CH+/- to select

item and use VOL+/- to adjust on time

and on time status: Off, Today or

Everyday.

Time

1:14

If you select Today, the Turn on function

only effect today.

If you select Everyday, the Turning on

function effects everyday.

Turn on 0:29 Status:Today

Press CLOCK button three times, the

Turn off menu appears, you can

operate by referring to the above steps.

Turn off 0:29 Status:Today

Use SLP button

Press this button repeatedly to set the

sleep time between 0, 10, 20, 30, 60,

90, 120, 180 or 240 minutes. If you

select 0 minute, that means the sleep

timer function is turned off.

Sleep

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjustments in PC mode

To enter into PC mode

Repeatedly press AV button on the remote control or SOURCE

button on the control panel until the screen display PC, which

indicates that the set is in PC mode.

PC signal format

Please connect VGA input and be sure that there is VGA input

signal. The signal format should be one of the follows:

640 x 480 @60Hz

SOURCE

MENU VOL

VOL +

CH +

640 x 480 @75Hz

800 x 600 @60Hz

800 x 600 @75Hz

1024 x 768 @60Hz

1024 x 768 @75Hz

We recommend you to use 1024 x 768 @60Hz so that the set

can obtain the best picture.

Use AUTO CORRECT button

When PC signal format changes or when you switch to PC

mode by AV button, the set corrects picture automatically

including frequency and phase to obtain the best display.

During the process of auto correction, all buttons on the

remote control and control panel do not work until this process

is finished.

When the set displays some signal formats that are

nonstandard and can not adjust by itself to the best displaying

status, now you can press AUTO CORRECT button to correct

the displaying again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjustments in PC mode

(continued)

When there is correct input signal, press MENU button and PC

menu appears. Use CH+/- to select item and VOL+/- to adjust

Adjusting bright and contrast

You can adjust bright and contrast in PC mode and this

adjustment does not effect the bright and contrast in TV and

AV mode.

Adjusting horizontal/vertical position

SOURCE

MENU VOL

VOL +

CH +

When a nonstandard signal input to the

set and the picture may not be in the

screen centre. Now you can adjust its

horizontal and vertical position to

display correctly.

Adjusting phase and frequency

If you can not obtain the best display

after auto correction for many times.

Now you can adjust phase and

frequency to obtain the best display.

Adjusting Colour temperature

You can select different Colour

temperature to obtain correct white.

Press MENU button, use CH+/- to

select Color item, press the VOL+/-

to select between User, 9300K, 7300K,

6500K or 5000K.

Adjusting Backlight

You can adjust the Backlight

according to your favourites. Press

MENU button, use CH+/- to select

Backlight item, press VOL+/- to

select between Soft, Bright or Nature.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble shooting

Before calling service personnel, please check the following chart for a possible cause to the trouble

you are experiencing.

Symptoms

Check the following items

Be sure the power cord is plugged in.

Power is not turned on.

Poor colour, poor tint.

Contrast, colour, tint are not correctly adjusted.

Possible interferences of automobiles, motorcycle,

trolley bus, neon lamps, etc.

Spots appear on the screen.

Possible interference of electronic interference

from another TV set, a computer, an electronics

game machine, a broadcast station, etc.

Stripes appear on the screen.

Double images or "ghosts".

Snowy picture.

This may be caused by reflections from nearby

mountains or buildings.

Check the antenna direction.

It is possible that the aerial "lead-in" is damaged or

has come off.

Check the antenna direction.

Even if the picture or the sound is normal, changes

in the room temperature sometimes make the TV

cabinet expand or contract, making a noise. This

does not indicate a malfunction.

TV cabinet creaks.

The batteries may be worn out.

The batteries may be installed with their polarity

reversed.

Remote control does not

work.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Power Supply for AC adaptor: ~240V 50Hz

Power Supply of this TV set:

DC 12V

Power Consumption:

Dimensions (mm):

Gross Weight (kg):

SCREEN (cm):

AC 35W

585 (W) x 515 (H) x 257 (D)

7.5

TV system & channel range.

SYSTEM

VHF

1-12

2-12

2-13

2-12

1-12

UHF

CATV

PAL-D/K

13-57

21-69

14-79

21-69

Z1~Z37

PAL-B/G

X~Z+2, S1~S41

PAL-I

NTSC-M US

SECAM-B/G

SECAM-D/K

Colour system:

Sound output:

Accessories

A-6~A-1, A~W,AA~FFF

X~Z+2, S1~S41

PAL/NTSC/SECAM, NTSC-4.43, PAL-60

1W x 2

One remote controller;

One AC adaptor;

One VGA cable.

Design and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

PALSONIC CORPORATION PTY LTD

1 JOYNTON AVENUE

WATERLOO NSW 2017 AUSTRALIA

TEL: (02) 9313 7111

FAX: (02) 9313 7555

www.palsonic.com.au

PALSONIC CUSTOMER SERVICE

TELEPHONE

AUSTRALIA: 1300 657 888

604-L1513-01

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Coffeemaker CVA 620 User Manual
Milwaukee Cordless Saw 6266 22 User Manual
Multiquip Portable Generator dca45ssiu4 User Manual
NEC Impact Driver 0799 20 User Manual
Nextar MP3 Player MA791 User Manual
Niles Audio Stereo System SI 1260 User Manual
Nokia Cell Phone RM 240 User Manual
NuTone Outdoor Storage 407ADJ User Manual
Oki Printer 58377901 User Manual
Panasonic Telephone KX TC1230NZW KX TC1230ALW User Manual