LCD TV COMBO
TFTV1520D
USER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION: Laser radiation when open. Do note stare into
beam.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION
1.
2.
3.
The product contains a low-power laser device. In order to ensure the safety of the laser device,
do not remove any cover and attempt to repair the unit. If any service is needed, please contact
the distributor or its authorised service centre.
To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable
parts inside. Refer servicing to qualified service personnel. Unplug the product from the wall
outlet before servicing or when it is unused for a long period of time.
The manufacturer should not hold responsibility for the damage caused by any substitutions
and modifications of the product without authorisation from the manufacturer or authorised unit.
WARNING
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Copyright Protection
The product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorised
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorised by Macrovision, Reverse engineering or disassembly is prohibited.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Note:
1. Read these instructions.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus
near water.
2. DANGER: Visible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit. Leave all servicing to
qualified service personnel.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Maintain well ventilated conditions around the product.
Do not put product on bed, sofa or anything that blocks ventilation. Install in according to the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Read, heed and follow all instructions to ensure correct and safe installation and
inter-connection of the apparatus.
10. The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
11. The mains socket outlet shall be installed near the apparatus and the mains plug shall remain
readily operable.
12. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
13. Only use attachments/accessories specified by the manufacturer.
14. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
15. Unplug this apparatus during lightning storms or when unused for long periods of time.
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
17. The apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
Note: Do not touch the colour TFT LCD screen by hand directly.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Characteristic Features
This product incorporates DVD player, LCD display and TV receiver in one system.
Multiple Mode
NICAM Function
Supports the NICAM function. According to the
TV mode
broadcasting programs, you can choose the
corresponding soundtrack
COMPOSITE mode
S-VIDEO mode
VGA mode
Advanced Playing Features
DVD mode
Compatibility
High Quality Property
DVD, CD, and JPEG discs compatible.
High Resolution
All Playback Functions
Adopt an MPEG2 decoding format to achieve
horizontal resolution more than 500 lines.
Fast forward and reverse, slow playback and
repeat playback
LCD (Liquid Crystal Display)
Designed with colour TFT liquid crystal display
clearly shows the data.
Special Playback
Support multi-angle, multi-language and
multi-subtitle playback.
Stereo Amplifier
NOTE: It is normal for a TFT screen to
experience some light or dark spots appearing
on the LCD screen.
Built-in two speakers provide high quality
sound.
AV and VGA Input
Can be connected to external audio and video
signal source and PC.
Special Function
Support sleep time setting function and favourite
channel setting function, etc.
Multi Audio and Multi-video modes
Support multi-audio and multi-video modes,
provides more selecting.
Auto TV Searching Function
Can be connected to the TV antenna, supports
Auto and manual TV programs searching
function.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Information
Discs Formats Supported By This Player
DISC LOGO
CONTENTS
SIZE
MAXIMUM TIME
133min(SS-SL)
242min(SS-DL)
266min(DS-SL)
484min(DS-DL)
Audio+Video
(active picture)
DVD
12cm
CD
Audio
12cm
12cm
74min
JPEG
Still high resolution
The operating method of some DVD discs is specified by the software maker. Please refer to
the instruction manual of the disc.
About Disc Terms
Title
Generally, pictures or music compressed on a DVD are divided into several sections, “title”.
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of
one or more chapters and each of them is numbered for easy searching. But some discs may not
have a recording chapter.
Track
A segment of picture or music on a CD. Each track is numbered for searching.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Front and Side Panel
1. 15" colour TFT screen
15" colour TFT screen clearly shows the data.
2. Power Indicator
In normal playback status, it turns green; in standby mode, it turns red.
3. Remote sensor
Remote sensor window for the remote control.
4. Speakers
Two speakers output high quality stereo sound.
5. Disc Tray Slot
Used to load disc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Top Panel
Top Panel Drawing
12 3 4 5678
1. Input button
Press to modes modes among TV, COMPOSITE, S-VIDEO, VGA and DVD.
In setup menu, the same function as OK button.
2. MENU button
Press to enter or return to the previous setup menu.
3. CH
While in TV mode, press to select channels
In setup menu, the same function as direction button.
4. VOL button
In TV mode, press to decrease or increase the volume in DVD mode.
/
button
,
/
In setup mode, the same function as
5. PLAY button
,
direction button.
Press to play the disc in DVD mode.
6. Stop
Press to stop playback in DVD mode.
7. EJECT button
Press to eject the disc out.
8. POWER button
Press to enter or exit standby mode.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
Rear Panel Drawing
2
4
5
7
8
1
3
6
1. DC 12V Power Supply Cord
Connect the power supply adaptor or the car adaptor
2. VGA Input Jack
Connected to the VGA output jack on a personal computer.
3. PC Audio Input Jack
Connected to the PC audio output jack.
4. S-Video Input Jack
Connected to the S-VIDEO input in S-VIDEO.
5. L/R Audio Input Jacks
Connected to L/R audio input in both S-VIDEO or COMPOSITE mode.
6. Video Input Jack
Connected to the VIDEO input in the COMPOSITE mode.
7. Earphone Jack
When connected to earphone, the internal speakers will automatically turn off.
8. TV Signal Input Jack
Connected for the external TV signal input.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote Control Drawing
6. +10 button
Select track number greater than 9, in DVD
mode.
1
2
18
19
7. Direction buttons (
)
In the setup menu, press the
button
to select a desired item and press
buttons to adjust or set.
8. OK button
3
20
21
Press to confirm the selection.
9. P.M. button
4
Press to shift the screen picture modes
5
6
among User, Standard, Soft, Bright and
22
23
Shine.
10. Play button
7
8
24
Press to play a disc when in the DVD
9
25
26
mode.
11. Stop
27
28
10
11
Press to stop disc playback when in DVD
mode.
12
13
29
30
12.
Skip
31
32
Press to skip to the previous chapter/track
when in DVD mode.
Under Teletext mode, it's the teletext colour
button.
14
15
16
17
33
34
13.
Next Skip
Press to skip to the next chapter/track when in
DVD mode.
Under Teletext mode, it's the teletext colour
1. POWER button
Press to enter to or exit the standby mode.
2. Input button
Press to select mode among TV, COMPOSITE,
S-VIDEO, VGA, and DVD.
3. CH+/- button
When in TV mode press to select
channel.
button.
14. TITLE button
When a DVD disc is playing, press the TITLE
button to go the title menu and display
disc contents.
Under TV, COMPOSITE or S-VIDEO
mode, press display/close the teletext.
15. MENU button
Press to enter disc menu when in DVD
mode.
Under Teletext mode, press to disable
teletext display and press again to
resume.
4. VOL + /-
Press to increase or decrease the speaker
volume level.
5.
button
When in TV mode, press to return to the
channel previously viewed.
16. REPEAT button
Press to repeat a chapter, track, title, or all
program content when in DVD mode.
Under Teletext mode, press to display
index page.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
17. ZOOM button
29.
button
Press to activate zoom function.
Under Teletext mode, press once to
display the concealed information, such
as solution of riddles or puzzles; press
again to resume riddles information
from display.
Press to search forward when in DVD
mode.
30.
button
Press to search backward when in DVD
mode.
Under Teletext mode, it's the teletext colour
button.
18. INFO. button
Press to display reference information
of the current program.
19. MUTE button
31. AUDIO button
Press to select audio language or audio
track when in DVD mode.
Press to turn on or off speaker output.
20. 0~9 number buttons
Press to select numbers such as TV
Channel.
Under Teletext mode, press to freeze the
current page and press again to resume.
32. SUBTITLE button
Press to select alternate subtitle
languages during playback of a multiple
language DVD disc when in DVD mode.
Under Teletext mode, press button first
time to double the size of teletext letters in the
upper half of the screen, second to
double the size of the teletext letters in the
lower half of the screen and third to
resume normal status.
21. -/--/+10 buttons
When in TV mode, press to select 1-digit
or 2-digit channel number and then use the
number button to select channel.
When in DVD mode, press to select
numbers greater then 10.
22.
button
This feature allows you to set up sleep
time when in TV mode. Press the button
and then the "Sleep Time" window will
appear on the left top of the screen. Then
press the OK button to enter setup
32. ANGLE button
Press to access various camera angles (if the
DVD disc contains multiple camera angles)
when in DVD mode.
and the
button to select the
Under Teletext mode, press to select four
groups 3-digit numbers that displayed in
different colours at the bottom of the screen.
Press the colour buttons on the remote
control to to select, then use the number
buttons to input the corresponding number
to display the page.
Repeat the above procedures for each
page to be stored, using a different colour
button accordingly each time.
sleep time "Off" to close this function.
23. STEREO button
Press to shift sound track when in TV
mode.
24. EXIT button
Press to exit from menu setup.
25. Eject button
Press to eject the disc from the unit.
26. DVD SETUP button
Press to open DVD setup menu when in
DVD mode.
34. SLOW button
Press to activate slow playback function
when in DVD mode.
27. GOTO button
Under TV mode, press to display the
real clock and press the EXIT button to
exit.
Press to select the desired disc starting
time, title or chapter when in DVD mode.
28.
button
Press pause playback or start step frame
by frame playback.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Do not connect the power cord until all other connections have been made.
Ensure that you observe the colour cord when connecting audio and video cables.
Connecting to Power Supply
Power is supplied through the provided appropriate power adapter, one end is connected to the
DC 12V IN jack on the rear panel of the unit, the other end to the wall AC outlet.
To wall AC Outlet
Connecting to TV Antenna
This unit can be connected to the TV signal input source via the TV jack on the rear panel.
Cable TV Signal Input
After connection, turn on the power of the unit. Then press the INPUT button to shift to TV mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Connecting to External AV Signal Source
Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the
external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear
panel of the unit to the external AV signal source.
AV SIGNAL SOURCE
After connection, turn on the power of the unit and the external AV signal source and then press the
INPUT button to shift to COMPOSITE or S-VIDEO mode.
Note: the L/R audio input jack scan be used in the both COMPOSITE and S-VIDEO modes.
Connecting to Earphones
This unit can be connected to an earphone for listening music privately. See the below figure for
details:
After connecting to the earphone, the internal speakers output will turn off automatically.
Note: Excessively loud volume could damage your hearing. So turn down the volume before
you connect the headphones, and then raise the volume to comfortable level.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Connecting to PC
The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the
figure below to connect.
1. Connect one end of the VGA cable to the VGA input jack on the rear panel and the other end
to the PC.
2. Connect one end of the audio cables to the PC audio input jack on the rear panel and the other
end to the PC audio output jack.
3. Set the PC's resolution at 1024x768@60Hz.
VGA
AUDIO
After connection, turn on the unit and the PC and then press the INPUT button to shift to VGA
mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
NOTE: In other mode, you can refer to the following instructions in TV mode to go on
with some settings. Only when there are signals, the menus can appear and be set.
Preparation
1. After connection, press the POWER button to turn on the power. (If it is turned on, the power
indicator is blue.)
2. Press the INPUT button to shift to TV mode. You can go on with the following operations.
Image Setting
Note: This item is only available when there is signal input.
Image
Audio
Setup
Scheme
Picture
Press the MENU button once to enter the setup
menu. Press the button to select Image and
press the OK button to enter the menu shown on the
right.
Brightness
Contrast
Hue
In the Image setup menu, press the
button to
select the desired item. Press the MENU button to
return to the previous menu.
Color
Sharpness
Advanced
Image
Audio
Timer
Setup
Scheme
Scheme Setup
Press the
button to select Scheme and press
button to
Normal
Vivid
the OK button to enter. Press the
select the desired item and press the OK button to
confirm your selection. Press the MENU button to
return to the previous menu.
Sports
Nature
Picture Setup
Image
Audio
Timer
Setup
Picture
Press the
button to select Picture and press
button to
the OK button to enter. Press the
User
select the desired item and press the OK button to
confirm your selection. Press the MENU button to
return to the previous menu.
Standard
Soft
Bright
Shine
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
When the VGA signal is connected to the unit, the Advanced setup menu is shown below:
Image
Audio
Timer
Setup
Advanced
Press the "
" button to select the desired
Auto Adjust
Image Pos
Phase
item and press the "ENTER" button to enter it's
setup menu. Press the "MENU" button to return
to the previous menu.
Clock
Auto Color
SRGB
Auto Adjust:
If the monitor is not clear, you should carry out "Auto Adjust".
Press the "
Press the "
" button to select "Auto Adjust" and press the "ENTER" button to enter it's menu.
" button to select "Yes" to activate this function or "No" to cancel. Press the "MENU"
button to return to the previous menu.
Image Pos:
Press the "
" button to select "Image Pos" and press the "ENTER" button to enter it's menu
Within the menu, press the "
" button to move the image. Press the "MENU" button to return
" button to select "Phase". Press the " " button to adjust the value. Press the
to the previous menu.
Phase:
Press the "
"MENU" button to return to the previous menu.
Clock:
Press the "
" button to select "Clock" and press the "ENTER" button to enter it's menu. Press
the "
"button to adjust the value . Press the "MENU" button to return to the previous menu.
Auto Color:
Press the "
" button to select "Auto Color" and press the "ENTER" button to activate this
function. Press the "MENU" button to return to the previous menu.
sRGB :
Press the "
" button to select "sRGB" and press the "ENTER" button to enter it's menu. Press
the "
" button to select "On" to activate this function or "Off" to cancel. Press the "MENU"
button to return to the previous menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
Audio Setting
Image
Audio
Timer
Setup
Volume
Bass
Press the MENU button once to enter the setup
menu. Press the
button to select Audio and
Treble
press the OK button to enter the menu shown on the
right.
Balance
Auto Volume
Sound Mode
In the Audio setup menu, press the
button to
select the desired item. Press the MENU button to
return to the previous menu.
Volume Setup
Press the
button to select Volume and press the
button to adjust the level. Press the
button to adjust the level. Press the MENU
button to adjust the level. Press the
button to select Balance and press the button to adjust the level. Press the
MENU button to return to the previous menu.
Bass Setup
Press the
button to return to the previous menu.
button to select Bass and press the
Treble Setup
Press the
MENU button to return to the previous menu.
button to select Treble and press the
Balance Setup
Press the
MENU button to return to the previous menu.
Auto Volume Setup
Press the
button to select Auto Volume and press the OK button to access the menu. Press
the button to select "On" or "Off' and press the OK button to confirm. Press the MENU button
to return to the previous menu.
Sound Mode Setup
Image
Audio
Timer
Setup
Sound Mode
Press the
button to select Sound Mode and
press the OK button to enter. Press the
button
User
to select the desired item and then press the OK
button to confirm your selection. Press the MENU
button to return to the previous menu.
Standard
Music
Movie
Speech
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
Timer Setting
Press the MENU button once to enter the setup
Image
Audio
Timer
Setup
menu. Press the
button to select Timer and
press the OK button to enter the menu shown on the
right.
Off
In the Timer setup menu, press the
button to
select Off, 15Min, 30Min, 45Min, 60Min, 75Min,
90Min, 105Min or 120Min. Press the MENU button to
return to the previous menu.
Setup Setting
Press the MENU button once to enter the setup
menu. Press the
button to select Setup and
Image
Audio
Timer
Setup
Tuner/Channel
Language
Factory Reset
press the OK button to enter the menu shown on the
right.
In the Setup menu, press the
button to select
the desired item. Press the MENU button to return to
the previous menu.
Tuner/Channel
Press the
button to select the
Image
Audio
Timer
Setup
PAL Europe Tuner/Channel
Tuner/Channel and press the OK button to
enter the menu shown on the right. Press the
button to select the desired item. Press
the MENU button to return to the previous
menu.
Country
Auto Scan
Prog Organizer
Manual Install
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
Country
Image
Audio
Timer
Setup
PAL Europe Tuner/Channel
Country Select
Press the
button to select the
Country and press the OK button
to enter the menu shown on the
right. Press the
button to
Australia
Belgium
Britain
select the desired item. Press the
MENU button to return to the
previous menu.
France
Czech
Denmark
Auto Scan
Press the
button to select the Auto Scan and press the OK button to start auto scan. The
screen will display shown below:
Auto scan
CH No
8
FREQ 154.20 MHz
Auto scan will take a few minutes, when the tuning operation completes the unit will exit and
memorise the programs by sequence automatically.
During tuning, press the MENU button to exit the auto scan mode
Prog Organizer
Image
Audio
Timer
Setup
PAL Europe Tuner/Channel
Prog Organizer
Press the
button to select the
Prog Organizer and press the OK
button to enter the menu shown on
the right.
XXXXXXX
Channel Name
Skip
In the Prog Organizer setup menu,
press the
button to select the
Swap From Ch
Swap To Ch
Perform Swap
desired item. Press the MENU
button to return to the previous
menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
Channel Name
Press the
button to select the Channel Name and press the OK button to enter. Then press
button to select letters or press the number button to input numbers. Press the MENU
the
button to return to the previous menu.
Skip
Press the
button to select Skip and press the OK button to activate or cancel this function.
Press the MENU button to return to the previous menu.
Swap
Press the
button to select Swap from Ch and press the OK button to enter. Press the number
buttons to select program number. Repeat the above operations to Swap To Ch. Then Press the
button to select Perform Swap and press the OK button to confirm.
Image
Audio
Timer
Setup
PAL Europe Tuner/Channel
Manual Install
Manual Install
Press the
button to select the
Manual Install and press the OK
button to enter the menu shown on
the right.
47.00 MHz
Search
Color System
Fine Tune
CH NO
In the Manual Install setup menu,
press the
button to select the
desired item. Press the MENU
button to return to the previous
menu.
Store
Search
Press the
button to select Search and press the or to start searching forward or
backward. Press the MENU button to return to the previous menu.
Colour System
Press the
button to select Colour System and press the OK button to enter. Press the MENU
button to return to the previous menu.
Fine Tune
Press the
button to select Fine Tune and press the OK button to enter. Press the or
controls to start fine tuning forward or backward. Press the MENU button to return to the previous
menu.
This feature allows for minor adjustments to the integrated electronic tuner's ability to tune in weak
broadcast signals or where applicable solve minor irregularities in cable channel tuning parameters.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Function
CH NO
Press the
button to select CH NO and press the OK button to enter. Press the number buttons
to enter the channel number. Press the button to return to the previous menu.
Store
Press the
button to select Store and press the OK button to store the above operations.
Note: The "CH NO" and "Store" items only function when the program is searched out.
Language
Image
Audio
Timer
Setup
Language
Press the
button to select the Language, press
the OK button to enter the setup, press the
button to select item. Press the MENU button to
return to the previous menu.
English
French
Spanish
German
Italian
Factory Reset
Press the
button to select the Factory Reset
Image
Audio
Timer
Setup
Factory Reset
and press the OK button to enter. Press the
button to select "Yes" or "No". Select "Yes" and press
the OK button to reset all settings to default status;
select "No" and press the OK button to cancel factory
reset and it will return to the previous menu. Or press
the MENU button to return to the previous menu.
Yes
No
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NICAM Function
The unit support NICAM function under TV mode.
Under NICAM TV broadcast:
1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will
appear corresponding display as shown below:
Mono
Nicam Stereo
2. When receiving bilingual audio signals, press the STEREO/AUDIO button on the remote
control repeatedly to shift the sound tracks among Nicam I, Nicam II, Nicam I+II and Mono
and the screen will appear corresponding display as shown below:
Mono
Nicam I+II
Nicam II
Nicam I
3. When receiving mono audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between Nicam Mono and Mono and the screen will
appear corresponding display as shown below:
Mono
Nicam Mono
Under A2 TV broadcast:
1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control
repeatedly to shift the sound tracks between Stereo and Mono and the screen will appear
corresponding display as shown below:
Mono
Stereo
2. When receiving bilingual audio signals, press the STEREO/AUDIO button on the remote
control repeatedly to shift the sound tracks among I, II and I+II and the screen will appear
corresponding display as shown below:
II
I
I + II
3.
When receiving mono audio signals, press the STEREO/AUDIO button on the remote control to
display sound track Mono on the screen.
Mono
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation
Preparation:
After connections, turn on the unit and select the relevant video input before playback.
Disc Loading Steps:
1. Press the POWER button to turn on the power. Press the INPUT button and select DVD,
press the OK button to confirm and shift to DVD mode.
2. Handing the disc with its printed side outward vertically to the disc tray. (Referring to the
below picture.)
3. Slightly put the disc into the disc tray.
4. As disc is automatically taken in the disc tray fully, the player will search a disc and play it
automatically in DVD mode.
LABEL SIDE
Warning: Do not play poor quality discs that may damage the player's lens.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don't match, the disc cannot be played. This player's default code is region 4.
Play
Press the PLAY button to start playback. Press the STOP button once on the remote control to stop
playback, and press the PLAY button again to resume playback.
Stop
Press the STOP button once to stop playback and press the
PLAY button to resume normal
playback. Press this button twice repeatedly to stop playback completely.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation
Pause
Press the
PAUSE button once to pause the playback; press it repeatedly to start step-by-step
playback. Press the
PLAY button to resume normal playback.
Previous
and
Next
Press the
button to go to the next chapter. Press the
button once to return to the beginning of
the current chapter or track; press it twice to go to the previous chapter.
Fast Playback
Press the
or
FWD/REV SCAN button on the remote control to activate fast backward or
forward playback.
ZOOM
During DVD disc playback, press the ZOOM button on the remote control to realise several zoom
effects.
SLOW
During DVD disc playback, press the SLOW button on the remote control to start slow playback.
During slow playback, press the PLAY button to resume normal playback.
Repeat
Use the REPEAT button repeatedly to repeat a chapter, title or all.
Some discs do not support the repeat function.
Menu
Normally there is a selecting menu for DVD discs. You can press the MENU button (under DVD
mode) to enter the menu, and use the direction buttons to highlight an item. Then press the OK
button to confirm.
Title & Chapter
Normally there are several titles in a DVD disc, and several chapters (sections) in a title. You can
select any title or chapter quickly by entering the relevant number.
Language (Audio)
There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc
you can use press the AUDIO button on the remote control to select a language.
Subtitle
The DVD player can support multiple kinds of subtitles. When you play a multi-subtitle disc you can
press the SUBTITLE button on the remote control to select different subtitles.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation
GOTO
During DVD disc playback, press the GOTO button on the remote control once, there will be a
menu displayed on the screen. You can set or select items for your preference. Use the
direction buttons to select items and press the OK button to enter and use the
direction
buttons to select the desired item. Press the direction button to return. When select the
Title/Chapter, TT Time/CH Time, use number buttons to input desired title/chapter number time.
Some DVD discs do not support the search function.
Various Camera Angles
The movies on some DVDs have been recorded from various camera positions. This lets you enjoy
the same scene from different perspectives. In this case you'll usually find a marking on the DVD
sleeve.
When playing a DVD containing various camera angles the camera symbol appears on the screen.
Press the ANGLE button repeatedly until the desired perspective is shown. The picture will be
adjusted in 1~2 seconds.
CD Playback
The player will play all tracks on a CD disc by default. You can use the
buttons, or number buttons to select a track.
and
(PREV/NEXT skip)
Stop
Press the STOP button once to stop playback and press the PLAY button to resume normal
playback. Press this button twice repeatedly to stop playback completely.
Pause
Press the
PAUSE button to pause the playback and then press the
PLAY button to resume
normal playback.
Previous and Next
Press the
track.
button once to go the beginning of this track. Press twice repeatedly to go the previous
press the
button to play from the beginning of the next track.
Fast Playback
Press the or
forward playback.
FWD/REV SCAN button on the remote control to activate fast backward or
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation
Repeat
Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat.
Some discs do not support the repeat function.
Audio
During CD playback, press the AUDIO button on the remote control to select the audio output mode:
Mono Left, Mono Right, Mix-Mono and Stereo.
GOTO
Press the GOTO button to access the time-selected state. You can select Disc Go To, Track Go To
or Select Track respectively by pressing this button repeatedly. Use the 0-9 buttons to enter the
desired time, and then the player will play according to the selected time.
JPEG Playback
JPEG is a common picture format that requires small amounts of storage per image and has low
loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG
photo albums, you can ask your film development company to make a "PICTURE CD" when they
develop your film.
Normal Playback
Load a JPEG disc in. For JPEG disc, there will be a root menu displayed on the screen. Use the OK
button and the direction button to select a submenu, and then use the
select the contents. Many discs have other contents besides pictures.
For Picture CD disc, it will display the pictures automatically.
direction button to
During playback, press the
Many discs have other contents besides pictures.
Stop
or
button to select picture.
Press the STOP button once to stop playback and return to the preview menu. Press the
PLAY button to resume normal playback. Press this button twice repeatedly to stop playback
completely.
Pause
Press the
PAUSE button to pause playback, press the PLAY button to resume playback.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation
Repeat
During playback, press the REPEAT button repeatedly, and the repeat modes are Shuffle, Random,
Single, Repeat One, Repeat All and Repeat Off.
Previous and Next
During playback, press the
or
button to select picture.
Menu
Press the MENU button once to stop playback and return to the root menu.
GOTO
During playback, press the GOTO button on the remote control once, use the number buttons to
input the file number.
Picture Rotation
This can be used only when the picture is normally displayed. Once another picture is selected,
rotation will be cancelled automatically. Use the
buttons to rotate the picture.
Some JPEG disc may not support rotating
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
Preparations
1. Connect to the power supply and turn on the unit.
2. Press the INPUT button to shift to DVD mode.
3. Press the DVD SETUP button on the remote control to display the settings menu.
4. Press the
direction buttons on the remote control to select a category. All the items in the
category will appear on the screen.
5. Press the DVD SETUP button again to exit the setup.
General Setup Page
Press the DVD SETUP button to enter the General setup menu. The screen will display as the
below:
- - General Setup Page - -
In the menu, press the ENTER or
button to enter. Use the direction buttons to
button to
direction
TV Display
Angle Mark
OSD Lang
Captions
select the desired item. Press the
return.
Screen Saver
Last Memory
Go To General Setup Page
TV Display
- - General Setup Page - -
1. Press the
direction buttons to select TV
TV Display
Angle Mark
OSD Lang
Captions
PS
On
Eng
Off
On
On
Normal/PS
Normal/LB
Wide
Display.
2. Press the OK button to enter the setup.
3. Use the direction buttons to select items.
Screen Saver
Last Memory
4. Press the OK button again to confirm selection
and return.
Set TV Display Mode
Angle Mark
- - General Setup Page - -
1. Press the
Angle Mark.
2. Press the OK button to enter the setup.
direction buttons to select
TV Display
Angle Mark
OSD Lang
Captions
PS
On
Eng
Off
On
On
On
Off
Screen Saver
Last Memory
3. Use the
Off.
direction buttons to select On or
4. Press the OK button again to confirm selection
and return.
Set Angle Mark
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
OSD Lang
The item is used to select the OSD language.
- - General Setup Page - -
TV Display
Angle Mark
OSD Lang
Captions
PS
On
Eng
Off
On
On
1. Press the
direction buttons to select OSD
Lang.
English
French
2. Press the OK button to enter the setup.
3. Use the direction buttons to select items.
Screen Saver
Last Memory
Spanish
German
Italian
4. Press the OK button again to confirm selection
and return.
Portuguese
Dutch
Set OSD Language
Captions
- - General Setup Page - -
1. Press the
direction buttons to select
Captions.
TV Display
Angle Mark
OSD Lang
Captions
PS
On
Eng
Off
On
On
2. Press the OK button to enter the setup.
3. Use the direction buttons to select items.
On
Off
Screen Saver
Last Memory
4. Press the OK button again to confirm selection
and return.
Closed Captions
Screen Saver
- - General Setup Page - -
1. Press the
Screen Saver.
2. Press the OK button to enter the setup.
direction buttons to select
TV Display
Angle Mark
OSD Lang
Captions
PS
On
Eng
Off
On
On
3. Use the
Off.
direction buttons to select On or
Screen Saver
Last Memory
On
Off
4. Press the OK button again to confirm selection
and to return.
Screen Saver
Last Memory
- - General Setup Page - -
1. Press the
direction buttons to select Last
TV Display
Angle Mark
OSD Lang
Captions
PS
On
Eng
Off
On
On
Memory.
2. Press the OK button to enter the setup.
3. Use the
Off.
direction buttons to select On or
Screen Saver
Last Memory
On
Off
4. Press the OK button again to confirm selection
and return.
Set Last Memory State
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
Speaker Setup Page
Press the DVD SETUP button to enter the General setup menu, then use the
direction buttons
to select Speaker Setup Page, the screen will display as the below:
- - Speaker Setup Page - -
Downmix
In the menu, press the ENTER or direction
button to enter. Press the button to return.
Go to Speaker Setup Page
Downmix
- - Speaker Setup Page - -
1. Press the
direction button to select
Downmix
LT/RT
Stereo
Downmix.
2. Press the OK button to enter the setup, the
screen will display as left:
3. In the menu, use the
select items.
direction buttons to
4. Press the OK button again to confirm selection
and return.
Set Downmix Mode
Dolby Digital Setup
Press the DVD SETUP button to enter the General setup menu, then use the
direction buttons
to select Dolby Digital Setup, the screen will display as the below:
- - Dolby Digital Setup - -
Dual Mono
Dynamic
In the menu, press the ENTER or
direction
button to
button to enter. Use the
select the desired item. Press the
return.
direction buttons to
Go Dolby Digital Setup
Dual Mono
- - Dolby Digital Setup - -
1. Press the
direction buttons to select Dual
Dual Mono
Dynamic
Stereo
Mono.
L-Mono
R-Mono
Mix-Mono
2. Press the OK button to enter the setup.
3. Use the direction buttons to select items.
4. Press the OK button again to confirm selection
and return.
Dual Mono (1+1) Setup
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
Dynamic
1. Press the
direction buttons to select
- - Dolby Digital Setup - -
Dynamic.
FULL
3/4
Dual Mono
Dynamic
Str
2. Press the OK button to enter the setup, the
screen will display as left:
3. Press the OK button to enter.
1/2
4. Use the
direction buttons to adjust.
1/4
5. Press the OK button again to confirm setting
and return.
OFF
Set Drc To Full
6. Press the
button to return.
Sharpness
- - Video Setup Page - -
1. Press the
direction buttons to select
Sharpness
Brightness
Contrast
Low
00
High
Sharpness.
Medium
Low
00
2. Press the OK button to enter the setup.
3. Use the direction buttons to select High,
Medium or Low.
4. Press the OK button again to confirm selection
and return.
Sharpness
Brightness
1. Press the
direction buttons to select
Brightness.
2. Press the OK button to enter the setup, the
screen will display as left:
3. Use the
level.
direction buttons to adjust the
Brightness
0
4. Press the OK button again to confirm setting
and return.
Brightness
Contrast
1. Press the
direction buttons to select
Contrast.
2. Press the OK button to enter the setup, the
screen will display as left:
3. Use the
level.
direction buttons to adjust the
Contrast
0
4. Press the OK button again to confirm setting
and return.
Contrast
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
Preference Setup
Press the DVD SETUP button to enter the General setup menu, then use the
direction buttons
to select Preference Page, the screen will display as the below:
- - Preference Page - -
Audio
Eng
Off
In the menu, press the ENTER or
direction
button to
Subtitle
Disc Menu
Default
button to enter. Use the
select the desired item. Press the
return.
direction buttons to
Eng
Go to Preference Page
Audio
- - Preference Page - -
1. Press the
direction buttons to select
Audio
Eng
English
French
Audio.
Subtitle
Disc Menu
Default
Off
Eng
Spanish
Chinese
Japanese
Italian
2. Press the OK button to enter the setup, see
the left figure:
3. Press the
direction buttons to select
Russian
German
audio language.
4. Press the OK button again to confirm setting
and return.
Preference Audio Language
Subtitle
Press the
direction buttons to select
1.
2.
3.
4.
- - Preference Page - -
Subtitle.
Audio
Eng
Off
French
Spanish
Chinese
Japanese
Italian
Subtitle
Disc Menu
Default
Press the OK button to enter the setup, see
the left figure:
Eng
Press the
direction buttons to select
Russian
German
Off
Subtitle language.
Press the OK button again to confirm setting
and return.
Preference Subtitle Language
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
Disc Menu
- - Preference Page - -
1. Press the
direction buttons to select Disc
Audio
Eng
Off
English
French
Menu.
Subtitle
Disc Menu
Default
2. Press the OK button to enter the setup, see
the left figure:
Eng
Spanish
Chinese
Japanese
Italian
3. Press the
direction buttons to select
Russian
German
Menu language.
4. Press the OK button again to confirm setting
and return.
Preference Menu Language
Default
- - Preference Page - -
1. Press the
direction buttons to select
Audio
Eng
Off
Subtitle
Disc Menu
Default
Default.
Eng
2. Press the OK button to select Reset.
3. Press the OK button, all the settings will return
to the default status.
Reset
Load Factory Setting
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
SYMPTOM
CHECK ITEM
Make sure disc tray is closed
Make sure disc is loaded in.
Make sure disc is loaded correctly.
The player cannot play.
Make sure disc is not dirty or warped.
Make sure the player’s region code is the same as region code
of DVD disc.
Make sure water condensation has not occurred.
Take out disc and leave the player on for at least one hour
when water condensation occurs.
Make sure system connection is correct.
Make sure the power of speakers is turned on.
Make sure the sound setup of DVD disc is correct.
Make sure disc is not dirty or warped.
Clean or replace the disc.
There is no sound.
Make sure the unit is turned on and is in correct video mode.
Make sure system connections are correct. If it is not, access
the setup menu and select the correct system.
There is no picture or the picture
moves up and down Unsteady.
Make sure it is not in A-B repeat status.
Press A-B button to cancel it.
Make sure disc is not dirty or damaged.
Clean the disc or skip selection.
Cannot continue to play and
play a section repeatedly.
Make sure there are no obstructions between the remote
control and the player.
Make sure the remote control is pointing at the player.
Make sure batteries are inserted and the polarity is correct.
Make sure battery is not weak.
The remote control does not
work.
Replace the weak battery.
Other Notes:
Static or other external interference may cause the player to behave abnormally. In this occurrence,
unplug the power-supply cord from the outlet and plug it in again to reset the player. If the problems
persist, then please disconnect the power and consult a qualified technician.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TFT-LCD Resolution
TFT-LCD Screen Size
1024 x 768
15 inches
AC100~240V, 50/60Hz
DC 12V 5A
Power
Power Consumption
Dimension
< 60W
461mm x 200mm x 352mm (LxWxD)
About 6.5 Kg
Weight
Ambient Temperature
10~450C
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc.
All rights reserved.
All Images in this manual are only for your information.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
|