Palsonic Flat Panel Television 6850PF User Manual

OWNER'S MANUAL  
68CM CORDLESS REMOTE COLOUR TELEVISION  
MODEL: 6850PF  
Type Tested  
Electrical  
Safety  
AS/NZS 3250 Lic 4166  
Standards Australia  
APP No: N15899  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls  
Front View  
Power Switch  
Indicator  
Remote Sensor  
MENU  
CH-  
CH+  
TV/AV  
VOL-  
VOL+  
CHANNEL DOWN  
VOLUME DOWN  
TV/AV  
MENU  
CHANNEL UP  
VOLUME UP  
Back View  
S-Video input  
AV2 input  
Antenna input  
AV outputs  
DVD inputs  
AV1 inputs  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
Power on/Standby  
Direct channel select  
Switch between current channel  
and last viewed channel  
Program sort and select  
Select AV or TV  
Enter/exit game  
To display current  
channel information  
TO mute the sound  
To display picture menu  
To display sound menu  
To display menu main page  
Channel select or  
menu item select in menu  
operation  
Adjust volume or adjust menu  
item in menu operation  
Scanning programs  
Picture mode select  
Sleep timer  
Sound mode select  
To turn on/off woofer  
(This button does not work  
in this model)  
Surround sound mode select  
Sound system select  
(This button does not work  
in this model)  
Colour system select  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a  
reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended  
for comfortable viewing.  
TV REAR  
RF  
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and  
noise which may occur due to radio wave conditions.  
The aerial cable should not be bundled with the power cord and the like.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
To connect AV input terminals  
You can connect video equipments such as a VTR and video camera to this TV and enjoy the high  
quality picture and sound.  
If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal  
(special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (RCA ).  
The S-VIDEO and AV2 use the same group of audio input terminals, and the S-VIDEO input terminal  
has priority over the AV2 VIDEO terminal. To use equipment connected to the VIDEO terminal,  
disconnect any plug from the S-VIDEO terminal.  
TV SET SIDE  
To audio outputs  
To video input  
R
Y
W
W
Y
R
To video output  
To audio inputs  
Video camera, etc.  
: Yellow (video)  
Y
W
: White (audio L/MONO)  
: Red (audio R)  
VTR, DVD, etc.  
R
TV SET REAR  
To audio  
outputs  
To video  
output  
R
W
Y
Y
W
R
You press the AV button on remote control to select input signal. Every press of this button, the  
screen displays as the following sequence:  
AV1  
AV2  
TV  
(S-VIDEO)  
(DVD)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning In  
Menu Operations  
Press the MENU to access the menu main page. Press the  
MENU repeatedly to select a sub-menu page. Use CH+/- to  
select menu item or VOL+/- to adjust the value of menu item.  
Press DSP or wait for approx. 10 seconds without any  
operation to exit menu.  
Channel Preset  
The unit provides two ways for you to preset channels:  
Auto Search and Manual Search.  
Access the PRESET menu page.  
1
Press the MENU repeatedly to  
display the PRESET menu page.  
PROGRAM  
SKIP  
BAND  
001  
OFF  
V-L  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
Note: If the CHILD LOCK is set to  
VALID, the PRESET menu page  
can not be accessed. Please refer  
to Page 21 Setting CHILD LOCK.  
In AV mode, the PRESET menu page  
can not be accessed.  
- - -  
NEWS  
SEL.  
SET  
Menu item select  
Menu item select  
2 Auto Search  
2.1 Press CH+/- to select AUTO  
SEARCH item.  
2.2 Press VOL+/- to start Auto  
Search. All active channels will be  
preset and stored into the memory  
automatically. After auto search,  
the TV will go to the first channel.  
2.3 During the process of Auto  
search, pressing MENU will stop  
the process.  
Menu item select  
PROGRAM  
SKIP  
001  
OFF  
V-L  
BAND  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
- - -  
NEWS  
SEL.  
SET  
AUTO SEARCH  
025  
V-H  
Note: please set the COLOR SYSTEM to AUTO before you  
start AUTO SEARCH.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning In  
3
Manual Search  
If auto search can not preset the desired channels, or you  
want to preset the desired channels one by one with the  
preferred channel numbers, please make use of Manual  
Search.  
3.1 From the PRESET menu, press  
PROGRAM  
SKIP  
001  
OFF  
V-L  
CH+/- to select PROGRAM item  
and use VOL+/- to select a  
program number.  
BAND  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
- - -  
NEWS  
SEL.  
SET  
Direct Channel  
select  
Note: You can also use 0-9 button to input the channel  
number directly.  
3.2 Press CH+/- to select  
MANUAL SEARCH item. Press  
PROGRAM  
SKIP  
001  
OFF  
V-L  
To exit  
menu  
and hold VOL+ to search towards  
higher frequency; or press and hold  
VOL- to search toward lower  
frequency. When a channel is  
located, the searching stops and  
the channel is stored in the  
BAND  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
- - -  
NEWS  
To display  
menu page  
Menu item select  
Menu item select  
SEL.  
SET  
specified channel number.  
Menu item select  
You can also use BAND selection  
to quicken searching process if you  
know which band your desired  
program locates in. Press CH+/- to  
select BAND item, press VOL+/- to  
adjust. The band switches among  
UHF, V-L, V-H.  
PROGRAM  
SKIP  
001  
OFF  
V-L  
BAND  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
- - -  
NEWS  
SEL.  
SET  
3.3 Repeat step 3.1 and 3.2 if you want to store another  
program in other position number.  
After you finish searching, you may press DSP or  
repeatedly press MENU button to exit.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 To skip an unnecessary channel  
After presetting the channels, you may skip unnecessary  
channels so that only the channels you want to watch are  
selected with CH+/- button.  
4.1 From PRESET menu select an  
unwanted channel number, for  
example, channel 10. (Please refer  
to step 3.1)  
4.2 Press CH+/- to select SKIP  
item. Press VOL+/- to set ON. Now  
channel 10 will be skipped when  
you browse channels by CH+ or CH-  
button.  
PROGRAM  
SKIP  
010  
ON  
V-L  
BAND  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
- - -  
NEWS  
SEL.  
SET  
To restore a skipped channel, please select the channel  
number from PRESET menu, repeat the above steps to set  
item to OFF.  
To display  
menu page  
5
Fine tuning  
Menu item select  
Menu item select  
Fine tuning is not necessary under normal conditions.  
However, in area of inferior broadcast conditions where  
adjustment is necessary for a better picture and sound,  
use Fine Tuning.  
Menu item select  
5.1 From PRESET menu select a channel number you want  
to fine tune, for example, channel 10. (Please refer to  
step 3.1)  
5.2 Press CH+/- to select FINE  
TUNE. Press VOL+ or VOL- to fine  
tune until the best possible  
PROGRAM  
SKIP  
001  
OFF  
V-L  
BAND  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
picture and sound are obtained.  
- - -  
NEWS  
SEL.  
SET  
Note: if some channel's colour is abnormal, it may be  
that the setting of colour system is wrong, please refer to  
next page to set the proper colour system.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning In  
6 The setting system  
If the picture's colour is abnormal,  
press the C-SYS button to select a  
proper colour system. Every press  
of this button, the colour system  
changes as follows:  
9
AUTO  
B/G  
AUTO  
PAL  
N3.58  
N4.43  
Note: You may also use the SYSTEM menu page to set  
the colour system.  
In this model, you needn't adjust the sound system.  
Direct Channel  
select  
7
Channel Swap  
You may use this function to edit the program order.  
according to your preference.  
Setting program  
type  
From the PRESET menu page,  
press CH+/- to select CH.SWAP  
To exit  
menu  
PROGRAM  
SKIP  
001  
OFF  
V-L  
BAND  
item and use 0-9 buttons to input the  
target channel number, then press  
VOL+/- to swap contents of current  
channel and the target channel.  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
To display  
menu page  
010  
NEWS  
Menu item select  
Menu item select  
SEL.  
SET  
Note: if the CHILD LOCK is VALID,  
the SWAP function does not work.  
Menu item select  
8
Sorting Programs  
You may sort all programs into NEWS, SPORT,  
ECONOMICS and TELEPLAY.  
Method 1: Use CH+/- or 0-9  
Colour system  
select  
buttons to select a channel  
number, press TYPE to sort this  
channel's program. Every press  
of this button, the program type  
NEWS CHANNEL  
SPORT CHANNEL  
changes as:  
TELEPLAY NEWS SPORT ECONOMICS  
ECONOMICS CHANNEL  
TELEPLAY CHANNEL  
Method 2: From the PRESET  
menu page, select a channel  
number and then press CH+/- to  
select CH TYPE item, press  
VOL+/- to select a program type.  
PROGRAM  
SKIP  
001  
OFF  
V-L  
BAND  
FINE TUNE  
MANUAL SEARCH  
AUTO SEARCH  
CH.SWAP  
CH TYPE  
- - -  
NEWS  
SEL.  
SET  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Selection  
1. Using number buttons  
Select one-digit channel number  
8
Press 0-9  
buttons  
Select two-digit channel number  
85  
--  
8-  
Press 0-9  
buttons  
Press --/---  
Press 0-9  
buttons  
Direct channel  
select  
Previous  
channel  
Select three-digit channel number  
Program type  
select  
1--  
12-  
128  
Press --/---  
Repeatedly  
Press 0-9  
buttons  
Press 0-9  
buttons  
Note:  
Channel up  
If you select a two-digit or three-digit channel the  
period of two-press should be within 2 seconds.  
2. Using CH+/- buttons  
Channel down  
Press CH+ the channel number increases; Press CH-,  
the channel number decreases.  
3. Using previous channel buttons  
Press  
button to switch between the  
11  
current channel and the previous  
channel.  
2
For example, the channel you  
previously watched is 11, the  
current channel is 2, press the  
button, it will return to channel 11,  
press the  
button again it will  
return to channel 2.  
4. Selecting channel according to program type  
Press SORT button to select a  
program type you want to view  
and press SELECT button to  
select channels within this  
program type group.  
15  
7
5
CHANNEL GROUP: NEWS  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture and Sound Adjustment  
1
Picture adjustment  
Press P.M button to quickly select picture mode as  
COLORFUL, MILD, STANDARD, NATURE and  
CUSTOM.  
You may follow these steps to  
adjust picture according to your  
preference.  
Press PIC button repeatedly to  
select a desired item you want to  
COLORFUL  
adjust, then press VOL+ or VOL-  
to adjust it.  
MILD  
STANDARD  
Press  
NATURE  
VOL-  
Item  
VOL+  
CUSTOM  
Lighter  
BRIGHTNESS  
CONTRAST  
COLOR  
Darker  
Weaker  
Paler  
Stronger  
Deeper  
Sharper  
Greenish  
BRIGHTNESS  
CONTRAST  
COLOR  
51  
100  
70  
To display  
PICTURE  
menu page  
SHARPNESS  
TINT*  
Softer  
SHARPNESS  
65  
To display  
SOUND  
Purplish  
menu page  
* The TINT item is for NTSC only.  
To display  
menu page  
SEL.  
SET  
Menu item select  
Menu item select  
2
Adjusting volume and muting the sound  
Press VOL+/- to adjust volume.  
If you want to mute the sound, press  
the button on the remote control.  
To restore the sound, press this  
Menu item select  
Picture mode  
select  
VOLUME  
button again or VOL+/-.  
32  
32  
Sound mode  
select  
MUTE  
Sound mode  
3
The unit provides five sound modes  
for your choice. Press S.M button to  
select a desired sound mode. You  
may also press SND or MENU  
BALANCE  
TREBLE  
BASS  
00  
+25  
+25  
button to enter SOUND menu page,  
press CH+/- to select SUD MOD  
item and press VOL+/- to select a  
desired sound mode from SPEECH,  
MUSIC, MOVIE, STANDA or  
CUSTOM.  
SURROUND  
SUD MOD  
OFF  
MUSIC  
SEL.  
SET  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mode  
SPEECH  
MUSIC  
Sound quality  
Suitable for listening to news/dialogue.  
Like a music hall filled with a rich warm sound.  
Like a movie theatre filled with a dynamic sound  
Standard sound  
MOVIE  
STANDA  
CUSTOM  
The sound quality you set.  
If you want to adjust sound to your  
desired status, press SND button  
repeatedly to select a item you  
want to adjust and press VOL+/-  
to adjust. Your adjustments will be  
memorised.  
BALANCE  
TREBLE  
BASS  
SURROUND  
SUD MOD  
00  
+25  
+25  
STEREO  
CUSTOM  
...............................  
SEL.  
SET  
To enjoy surround sound  
4
When viewing TV programs, press  
SURRD button to select OFF or  
STEREO; When viewing programs  
from AV inputs, press SURRD  
button to select STEREO, LOW  
or HIGH. You may also use the  
SOUND menu page to select a  
surround sound effect.  
To display  
SOUND  
menu page  
To display  
menu page  
Menu item select  
Menu item select  
SURROUND OFF  
Menu item select  
The STEREO effect is for TV  
programs or mono AV programs  
only. You may select a proper  
surround sound effect according to  
the input mode or program's  
contents.  
Surround sound  
effect  
SURROUND STEREO  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock Setting  
Clock Setting  
Press MENU repeatedly to display CLOCK menu page  
Note:  
Before you perform any timer settings, you need to set  
current time firstly. If you fail to set current time, your timer  
settings is invalid.  
TIME  
-- : --  
-- : --  
-- : --  
-- : --  
- - -  
Setting current time  
1
OFF-TIME  
ON-TIME  
CH-TIME  
PROGRAM  
From the CLOCK menu page, press  
CH+/- to select TIME item. You need  
to set hour and minute: use VOL- to  
set hour from 0-23; use VOL+ to set  
minute from 00-59.  
SEL.  
SET  
TIME  
8 : 15  
-- : --  
-- : --  
-- : --  
- - -  
OFF-TIME  
ON-TIME  
CH-TIME  
PROGRAM  
2
Off timer  
From the CLOCK menu page, press  
CH+/- to select OFF-TIME item and  
refer to step 1 to set hour and minute.  
The TV goes to STANDBY at the  
designated time and at the same time  
cancel your off timer setting. Next time  
if you want to use this function, you  
need to set the off timer again.  
SEL.  
SET  
To display  
menu page  
TIME  
8 : 15  
9 : 00  
-- : --  
-- : --  
- - -  
OFF-TIME  
ON-TIME  
CH-TIME  
PROGRAM  
Menu item select  
Menu item select  
Menu item select  
SEL.  
SET  
3
On timer  
From the CLOCK menu page, press  
CH+/- to select ON-TIME item and  
refer to step 1 to set hour and minute.  
Now you have finished setting the  
current time and turn-on time.  
TIME  
8 : 15  
-- : --  
10 : 15  
-- : --  
OFF-TIME  
ON-TIME  
CH-TIME  
PROGRAM  
- - -  
If the TV is in STANDBY, it turns on  
automatically at the designated time  
and at the same time cancel your on  
timer setting. Next time if you want to  
use this function, you need to set the on  
timer again.  
SEL.  
SET  
4
Preengage Channel  
TIME  
8 : 15  
-- : --  
-- : --  
10 : 30  
005  
OFF-TIME  
ON-TIME  
CH-TIME  
PROGRAM  
The function enables you to set a  
certain time and channel in advance,  
so that the TV goes to your preset  
channel at the designated time.  
From the CLOCK menu page, press  
CH+/- to select CH-TIME item and  
refer to step 1 to set hour and minute.  
Press CH- to select PROGRAM item  
and input a channel number by using  
0-9 buttons (or you may adjust  
SEL.  
SET  
TIME  
8 : 15  
-- : --  
-- : --  
10 : 30  
005  
OFF-TIME  
ON-TIME  
CH-TIME  
PROGRAM  
channel number through VOL+/-).  
The TV goes to the specified channel  
at the designated time.  
SEL.  
SET  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting  
System setting  
Press MENU repeatedly to display SYSTEM menu  
page.  
Setting black background  
From the SYSTEM menu page, press  
1
CH+/- to select BLACK BACK item.  
COL.SYS  
SIF.SYS  
BLACK BACK  
ZOOM  
AUTO  
B/G  
ON  
Press VOL+/- to select ON or OFF.  
If ON is selected, the screen is black  
and the unit goes to screen saving  
mode when no signal is received (in  
TV mode only).  
NORMAL  
SEL.  
SET  
2
ZOOM mode  
From the SYSTEM menu page, press  
CH+/- to select ZOOM item. Press  
VOL+/- to select NORMAL or  
ENLARGE. The ENLARGE mode is  
for you to view movie or 16:9 format  
programs.  
COL.SYS  
SIF.SYS  
AUTO  
B/G  
BLACK BACK  
ZOOM  
ON  
NORMAL  
To exit  
menu  
To display  
menu page  
SEL.  
SET  
Menu item select  
Menu item select  
Menu item select  
3
Colour system  
From the SYSTEM menu page, press  
CH+/- to select COL.SYS item. Press  
VOL+/- to select a proper colour  
system.  
COL.SYS  
SIF.SYS  
AUTO  
B/G  
BLACK BACK  
ZOOM  
ON  
NORMAL  
Note: This function is as same as the  
C-SYS button on the remote control.  
SEL.  
SET  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Game  
Game introduction  
There is a built-in game (Falling cube) for you to play.  
Press GAME button to access game interface.  
On the screen, there are falling cubes.  
Pressing MENU button can rotate the  
falling cube. Pressing VOL+/- buttons  
can move the falling cube right or left  
while pressing CH- button can hasten  
the falling speed of the cube.  
When one row has been filled with the  
cubes, the row will disappear, and your  
mark will gain one point. If two rows  
disappear at the same time, your mark  
will gain three points. If three rows  
disappear at the same time, your mark  
will gain seven points.  
Enter/  
exit game  
The right window provides hints about next cube's shape, you  
can arrange current cube's position and angle in advance.  
When the cubes reach to top, the screen will display  
GAME OVER, and the game is finished.  
Rotate cube  
Move cube  
rightwards  
Move cube  
leftwards  
To exit the game, press GAME button. If you want to restart  
the game when the game is finished, you should exit the  
game firstly, then access and start the game again.  
Move cube  
downwards  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Functions  
Setting Child Lock  
Before you enter child lock mode, please select the channel  
you want to set child lock.  
1
1.1 Entering Child Lock mode  
Press and hold DSP button until the  
screen displays "PASSWORD - - - -"  
then input the password to enter into  
Child Lock mode (the default  
password is 0000). Every press of  
the DSP button, the screen displays  
as follows:  
PASSWORD - - - -  
Number  
buttons  
LOCK STATUS  
CHILD LOCK  
MAX VOLUME  
NEW PASSWORD  
1.2 Setting Child Lock  
Before you set child lock, please set  
LOCK STATUS to VALID in the  
LOCK STATUS page by using  
VOL+/- (the default status is  
INVALID).  
Press and  
hold to enter  
child lock  
mode  
To set CHILD LOCK for current  
channel, press VOL+/- to set CHILD  
LOCK to ON in the CHILD LOCK  
page. If you want to set child lock for  
other channels, please select the  
channel and repeat the above steps  
to set CHILD LOCK separately.  
With the CHILD LOCK ON (of OFF)  
on the screen, press DSP again to  
display MAX VOLUME. This enables  
you to preset a maximum volume  
value when the LOCK STATUS is  
set to VALID.  
LOCK STATUS VALID  
To set or  
To set or  
change child  
lock mode  
change child  
lock mode  
CHILD LOCK ON  
MAX VOLUME 50  
Sleep timer  
If you want to change password,  
press 0-9 buttons to input a new  
password in the NEW PASSWORD  
page.  
NEW PASSWORD * *- -  
If a locked channel is selected, a red mark appears on  
the black screen.  
When the LOCK STATUS is set to VALID, the PRESET  
menu page is inaccessible.  
The TV set provides a master password: 8288  
Sleep timer  
2
Press SLP button to select sleep  
time from 15 to 120 minutes. The TV  
set goes to STANDBY at the  
designated time. If you want to cancel  
Sleep timer, press the SLP button  
90  
repeatedly to display  
--.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Functions  
3
Program Scanning  
Press SCAN button to scan the  
program from current channel to  
higher channel one by one. Every  
program will be scanned and the  
channel number is displayed on  
the screen. Each program will be  
displayed for about 2 seconds.  
9
AUTO  
B/G  
SCANNING  
Press any button to stop the process, and the TV will settle at  
the current scanned program.  
4
Calendar (1950-2049)  
Press MENU repeatedly to  
display CALENDAR page.  
Use CH+/- to adjust year; Use  
VOL+/- to adjust month; Use  
SCAN and SLP to adjust date.  
2008-01-01  
MO TU WE TH FR SA  
SU  
1
8
2
9
3
4
5
7
10 11 12  
6
13  
20  
27  
14 15 16 17 18 19  
21 22 23 26 25 26  
28 29 30 31  
Menu item select  
YEAR  
MONTH  
Adjust year  
5
Music mode  
Adjust month  
Scanning  
programs  
(adjust date  
in calendar)  
The TV set can serve as an audio system when you are  
playing CD, VCD or DVD.  
Press and hold  
to enter "MUSIC"  
mode  
If you only want to listen to the music, you may press and  
hold the S.M button for about 5 seconds to enter into  
"MUSIC" mode, the TV screen is black and the sound still  
works. Press any button on the remote control will exit  
"MUSIC" mode.  
Adjust date  
in calendar  
In "MUSIC" mode, you may play game at the same time  
while listening to music. If you want to exit "MUSIC" mode,  
you need to exit game firstly.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
Before calling service personnel, please check the following chart for a possible cause to the trouble  
you are experiencing.  
Symptoms  
Check the following items  
Be sure the power cord is plugged in.  
Contrast, colour, tint are not correctly adjusted  
Power is not turned on.  
Poor colour, poor tint.  
Possible interferences of automobiles, motorcycle,  
trolley bus, neon lamps, etc.  
Spots appear on the screen.  
Possible interference of electronic interference  
from another TV set, a computer, an electronics  
game machine, a broadcast station, etc.  
Stripes appear on the screen.  
Double images or "ghosts".  
Snowy picture.  
This may be caused by reflections from nearby  
mountains or buildings.  
Check the antenna direction.  
It is possible that the aerial "lead-in" is damaged or  
comes off.  
Check the antenna direction.  
The batteries may be worn out.  
The batteries may be installed with their polarity  
reversed.  
Remote controller does  
not work.  
Even if the picture or the sound is normal, changes  
in room temperature sometimes makes the TV  
cabinet expand or contract, making a noise. This  
does not indicate a malfunction.  
TV cabinet creaks.  
When the set is switched on, do not shift or move  
the set around. Sometimes it may develop an  
unevenness in colour in some parts of the screen.  
This can be eliminated by switching off the set with  
the POWER switch and wait for 10 minutes before  
switching on again.  
Unevenness in colour in  
some parts of the screen.  
It is possible that the CHILD LOCK is in VALID mode.  
To enter PRESET menu, set LOCK STATUS to  
INVALID.  
Black screen and PRESET  
menu is inaccessible.  
Black screen but the sound  
is normal.  
It is possible that the TV set is in music TV mode.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
604-Y29663-00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miller Electric Welder ICE 12C User Manual
Murphy Automobile Parts EA150 User Manual
Navigon GPS Receiver 2100 max User Manual
NEC Automobile Accessories 1940WCXM User Manual
NuTone Door LB 14 User Manual
Oki Printer Accessories 42625501 User Manual
Omega Vehicle Security Scanner DPS3300 User Manual
Omron Healthcare Thermometer MC 106 User Manual
Panasonic Blu ray Player DMP BD79 User Manual
Panasonic Smoke Alarm 3312F User Manual