DVD PLAYER
DVD / SVCD / MP3 / VCD / CD / CD-R & CD-RW PLAYER WITH KARAOKE
DVD
/
SVCD
/
VCD
/
MP3
/
CD
/
CD-R
&
CD-RW PLAYER WITH KARAOKE
REMOTE
DVD9200
ON/STANDBY
MIC LEVEL
MIC
Operating Manual
DVD 9200
Super VCD
4
VIDEO CD
Before attempting to connect, operate or adjust this product, please read
these instructions completely and keep this manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Disc types
Table of contents
Getting Started
P1-P6
Disc size 12cm
Single side, single layer/single side,
double layer
PAL and NTSC DVD disc
Playback time 135min/240min max.
Features
P1
P2
P3
Audio & Video
Audio & Video
Disc types & maintenance
Safety precautions
Accessories and remote control unit
System connection
P4
P5
P6
Disc size 12cm/8cm
SVCD, CVD and VCD disc
Playback time 74min/20min max
Front panel
Basic operation
P7-P8
Disc size12cm/8cm
CD disc
Playback time 74min/20min max
Starting playback and function buttons
Searching buttons and other buttons
P7
P8
Audio
PBC & Mp3 /JPEG functions
Playback mode
P9
P11
P12
P13
P14
P17
P18
Disc maintenance
-Before playback, wipe the disc from the center hole toward the outer
edge with a clean cloth.
Karaoke operation
Digest and program
Initial settings
Right
Wrong
Troubleshooting tips
Definition of terms
-Never use benzine, thinner, cleaning fluid, static electricity prevention
liquids or any other solvent.
Dirty disc may cause bad picture.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Safety precaution
WARNING
ATTENTION
WARNING
WARNING
If smoke, an odour or noises are
emitted from the unit, turn off the
power and disconnect the AC
power cord.
Keep the unit away from flower
vases, tubs, sinks, etc.. If liquids
are spilled into the unit, serious
damage could occur.
To avoid electrical shock, do not
open the cabinet, refer servicing
to qualified personnel only.
Do not expose this equipment
to rain or moisture.
ATTENTION
ATTENTION
WARNING
ATTENTION
Be sure to turn the unit off and dis-
connect the AC power cord before
cleaning the unit surface.
If the surface is dirty, wipe clean with
a cloth which has been dipped in a
weak soap-and -water solution and
wrung out thoroughly, and then wipe
again with a dry cloth.
When left unused for a long period
of time, the unit should be unplugged
from the household AC outlet.
Do not block ventilation holes of
the unit so that air can circulate
freely.
Touching the unit is dangerous,
If thunder.
Notes:
This unit is a class 1 laser product and uses a visible laser beam which could cause hazardous radiation exposure if directed. Be
sure to operate it correctly as instructed.
The above items are true of not only this unit but also most of the household electronic products.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Accessories
Remote control unit
P.7
POWER
P.7
SYSTEM
MUTE
P.8
P.12
P.12
GO TO
L/R
P.12
P.11
Audio cord
REPEAT P.11
P.13
REP A-B
PROGRAM
P.12
P.7
RANDOM
P.11
P.11
Remote
control unit
Batteries
(size AA, R6, UM-3)
P.13
P.8
CLEAR
SCAN
Video cord
P.11
P.13
DIGEST
Battery installation (remote control unit)
P.7
P.7
SKIP P.8
P.7
P.9
P.7
PBC
Remove the battery cover.
1.
P.11
P.14
2. Insert two batteries (AA, R6, UM-3 type)
making sure the polarity(+/-) matches the marks
inside the unit.
P.12
P.11
OSD
ZOOM
P.11
P.8
RESUME
STEP
P.8
SLOW
3. Replace the cover.
P.14
P.12
FUNCTION
P.12
--Do not attempt to recharge, short-circuit, disassemble, heat or throw
the batteries into the fire.
--Do not mix old and new batteries.
Point remote control unit no more than 8m from the remote
sensor and within about 60 of the front of the unit.
Weak batteries can leak and severely damage the remote control unit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
System connection
White
Yellow
AC IN~
REAR LEFT
CENTRE
FRONT LEFT
LEFT
OFF
ON
OPTICAL COAXIAL
POWER
REAR RIGHT
SUBWOOFER
FRONT RIGHT
RHT
DIGITAL AUDIO OUT
PCM / (BIT STREAM)
5.1 CH SURROUND AUDIO OUT
2CO OUT
Red
AC outlet on the wall
Audio cord
(optional)
Audio cord
(optional)
Audio cord
(optional)
S-video cord
(optional)
To audio input connector
(SUBWOOFER)
To audio input connector
(FRONT L . R)
To audio input connector
(CENTRE)
To audio input connector
(REAR L . R)
To stereo TV or other
audio equipments
Yellow Red White
To coaxial digital audio
input connector
Amplifier with 5.1ch input connector
(sold separately)
To optical digital audio input connector
Turn off the power and keep AC cord pulled out from the outlet when connecting the system.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Front panel
PAUSE BUTTON
PLAY BUTTON
STOP BUTTON
PREV BUTTON
NEXT BUTTON
DISC TRAY
OPEN/CLOSE BUTTON
REMOTE
ON/STANDBY
MIC LEVEL
MIC
REMOTE SENSOR
ON/STANDBY LED INDICATOR
MIC JACK
ON/STANDBY BUTTON
MIC LEVEL CONTROL
Vacuum fluorescent Display
PLAY MODE INDICATOR
PBC INDICATOR
PBC
SVCD
MP3
DISC TYPE INDICATOR
ALL
PLAYBACK TIME
PLAY/PAUSE INDICATOR
REPEAT INDICATOR
TITLE/TRACK NUMBER
Most of the functions can be controlled by remote control unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operation
Starting playback
Function buttons
1
REMOTE
REMOTE
ON/STANDBY
MIC LEVEL
MIC
ON/STANDBY
MIC LEVEL
MIC
3
2
2
Press POWER button to turn on power.
3
PLAY and PAUSE button: Press PLAY
button to start playback. Press PAUSE
button to pause playback.
1
2
1
2
Press OPEN/CLOSE button to load disc on
disc tray.
Numeric buttons (0-9):
You can select desired titles (DVD) or tracks (VC-
D 2.0) by pressing these buttons directly only if
the title or track number is less than 10.
If the title or track number is over 10. For instance,
if "28" is wanted, press "10+" twice, and then press
the 2-digit number "8".
Hold the disc without touching either of its surf-
aces, position it with the printed title side facing
up, align it with the guides, and place it in its pr-
oper position.
In case of interactive DVDs or VCDs with playb-
ack control, a menu appears on the TV screen.
STOP button: When this button is pres-
3
sed once, the unit records the stopped
point, from where playback will resume
(resume function) if PLAY is pressed
afterwards. But if STOP button is pressed
again instead of PLAY button, there will
be no resume function.
Press POWER button once, the unit is on
standby mode. Press it again, then it is on.
3
DVD discs possess super interactive function. Please normally use "
" and "select" keys in operation of OSD menu.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operation
Other buttons
Searching function buttons
REMOTE
Numeric buttons (0-9):
2
1
These buttons can function with GO TO
button or others (see page 7).
ON/STANDBY
MIC LEVEL
MIC
1
1
GO TO button:
3
SKIP button:
Press these buttons to go to the previous/
next chapter (DVD) or track (SVCD/VCD).
2
2
Press this button to go to desired posi-
tion. The player provides 3 search
mode.
1
4
SLOW button:
TITLE XX/XX CHAPTER [ ]/XXX
2
Press this button to select slow-motion
playback in forward and reverse direction
at 1/2, 1/4, 1/8 ,1/16 normal speed without
sound (DVD). When play SVCD/VCD
discs, press the button to select slow-
motion playback in forward direction at
4-level speeds as 1/2, 1/4, 1/8 ,1/16.
[DVD only]
[DVD only]
TRACK GOTO
DISC GOTO
SELECT TRACK
XX
Press PLAY button to return to normal playback.
[CD/VCD/SVCD]
STEP button: You can enjoy picture
When the above items are showed on TV screen,
you can input numbers to locate desired sector,
then press PLAY to commence play.
The number you input is invalid if it is beyond
the track's capacity.
3
frame by frame by pressing this button.
SCAN button: These buttons allow
skipping ahead/back at 4-level speeds .
4
This function maybe can't work with some SVCD
discs.
Press PLAY button to return to normal playback.
When " " appears while a button is being operated, it means that the corresponding is prohibited by the player or disc.
/
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PBC functions & MP3 /JPEG operations
PBC playback buttons
MP3 operations
When playing SVCD, VCD with PBC functions, you can enjoy
simple interactive software on TV screen.
MP3 is a kind of audio compacted format adopted the third audio compa-
cted layer mode in the international standard MPEG. Utilising MP3 format, the
compress rate can reach 12 to 1 high. Therefore, only one MP3 compact disc
can hold music over six hundred minutes or more than one hundred and fifty
songs. Moreover, it's audio quality almost reaches the CD standard.
When playback, there are such functions as track selection, stop,
previous/next scene, fast forward/backward, return, play/pause
and karaoke for you to select.
PBC functions can be auto run after the disc is loaded and its logo
appears on VFD.
Press the OPEN/CLOSE button: Put in MP3 disc on label side, now
1
1
system begins searching information on disc. Completing searching,
REMOTE
the menu screen appears, now you can use "
" and PLAY buttons
ON/STANDBY
MIC LEVEL
MIC
to select song to play, or you can select desired song to play by pressing
numeric buttons directly.
PBC button (SVCD/VCD only)
1
This button switches PBC function on or
off.
Prev & Next buttons: Their functions is to choose the previous or
next song to be displayed.
2
3
Desired tracks can be selected by pressing
numeric buttons when PBC functions are off.
Numeric buttons: Pressing number buttons on your remote controller,
you can directly select the song which you want to enjoy to be played.
For example, if you want to enjoy listing to the eighteenth song,
please press "1" once , and then press "8".
You can quickly find any desired ahead/back
point by pressing PREV/NEXT buttons only
if PBC main menu appears on TV screen.
If PBC functions are on, pressing RETURN button
will back to PBC main menu.
STOP button: Press the button will stop playback .
4
PBC functions allow you to select programs guided by simple interactive software.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
4
5
3
11
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
If playing DVD discs, press this button back to
root menu screen
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Press SETUP button to get to the setup menu. Use direction buttons
"
" to select the preferred item and press SELECT button to
confirm. After finishing settings, Press SETUP again to leave the
setup menu main page to the TV display.
SPEAKER SETUP PAGE
DOWN MIX
LT/RT
STEREO
OFF
ON
OFF
ON
OFF
ON
OFF
SUBWOOFER
ON
OFF
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
Preferences setup page
The following menu items can be changed:
TV TYPE: selects the type of television.
PREFERENCES PAGE
MULTI: automatic-self-selecting television sets.
NTSC
PAL
TV TYPE
PAL
MULTI
NTSC
AUDIO
ENGLISH
FRENCH
GERMAN
SPANISH
AUDIO: Selects a language for audio (if available).
SUBTITLE: Selects a language for subtitles (if available). no subtitles
are display after selecting OFF.
DISC MENU: Selects a language for title menus or DVD menus (if
available).
PARENTAL [DVD only]: This is to disable the playing of specified
DVDs which are unsuitable for children. Some DVDs are encoded
with specific rating level. If the rating level of the disc is higher than
that preset in the setup operation, playback of the disc will be prohi-
bited. After selecting one of the PARENTAL items the screen will
change to the PASSWORD VERIFY page.
SUBTITLE
ENGLISH
FRENCH
GERMAN
SPANISH
PORTUGUESE
ITALY
DUTCH
DANISH
OFF
PORTUGUESE
ITALY
ENGLISH
FRENCH
GERMAN
SPANISH
PORTUGUESE
ITALY
DISC MENU
PARENTAL
PASSWORD
DUTCH
DANISH
1 KID SAF
2 G
3 PG
4 PG 13
5 PGR
6 R
DUTCH
DANISH
CHANGE
7 NC-17
8 ADULT
OFF
DEFAULT
RESET
MAIN PAGE
PASSWORD [DVD only]: Selects the menu setup PASSWORD CHANGE
PAGE.
DEFAULT: Reset all settings according to factory default settings.
MAIN PAGE: Selects the menu setup MAIN PAGE.
Once the initial settings have been completed, the player can always be operated under the same conditions(especially with DVD discs).
The settings will be retained in the memory even after turning the power off until the settings are changed.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings and specifications
Password verify page
Electronical parameters
Item
Standard requirement
AC 85-245V~, 50Hz/60Hz
Power source
Power consumption
PASSWORD VERIFY PAGE
CURRENT PASSWORD
[ XXXX ]
<35W
Laser
Wave length: 655nm: Laser power: class 1
PAL/NTSC
Signal system
Optical digital output: optical connector;
Coaxial digital output: pin jack;
CURRENT PASSWORD: Enter the current password. If the
password is incorrect, the parental option will not be changed.
Digital audio output
Input
MIC
6.3mm jack
Y output level: 1Vp-p(75 ); C output level: 0.300Vp-p(75
)(PAL), 0.286Vp-p(75 ) (NTSC); connector: S-terminal
S-video
Password change page
Video
Output level: 1 Vp-p(75 ); connector: pin jack (1 systems)
Output level: 2Vrm (1KHz, 0 dB); connector: pin jack. 5.1ch mixed out-
put: 1 system (2 channels). 5.1ch discrete output: 1 system (5.1ch)
Audio
PASSWORD CHANGE PAGE
OLD PASSWORD
[ XXXX ]
[ YYYY ]
[ YYYY ]
Frequency
response
20Hz~20kHz
NEW PASSWORD
CONFIRM PASSWORD
S/N ratio
90dB
Dynamic range
80dB(1kHz)
Total harmonic
distortion
-65dB(1kHz)
OLD PASSWORD: Enter the OLD password. (Factory setting is
1369)
Other specifications
Handset x 1, Video cord x 1
Battery x 2 (AA, R6, UM-3 type), Audio cord x 1
Accessories
NEW PASSWORD: Enter the NEW password. Enter 4 digits from
the remote control unit numeric buttons.
Dimensions
Carton size
430 (W) X 255 (D) X 55 (H) mm
480 (W) X 335 (D) X 89 (H) mm
CONFIRM PASSWORD: Confirm the NEW password by entering
it again. If the confirmation is incorrect, the Password Change
Page will be displayed again.
N.W.: 2.35 kg
G.W.: 3.0kg
8.0m
Weight
Remote control distance
Specifications and design are subject to change without prior notice.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting tips
Troubleshooting tips [DVD]
Troubleshooting tips [Common]
Before calling for service, you can check the following items on
symptoms and solutions:
Play does not commence even when title is selected:
Confirm the "Rating" settings.
No sound or distorted sound:
Ensure that the equipment is connected properly.
Ensure that the input settings for the TV and stereo system are correct.
Adjust the master volume using the GUI screen for player information.
Audio soundtrack and/or subtitle language is not the one selected
at the initial settings:
If the audio soundtrack and/or subtitle language does not exist on
the disc, the language selected at the initial setting will not be seen/
heard.
No picture:
Ensure that the equipment is connected properly.
Ensure that the input setting for the TV is "video".
No subtitles:
Subtitles appear only with discs which contain them.
No play:
Condensation has formed: wait about 1 to 2 hours to allow the
player to dry out.
Alternative audio soundtrack (or subtitle) language fail to be
selected:
This player can't play discs other than DVDs, SVCDs, MP3s, VCDs
and CDs.
The disc may be dirty and require cleaning .
Ensure that the disc is installed with the label side up.
An alternative language is not selected with discs which do not contain
more than one language.
In the case of some discs, the alternative language cannot be selected by
operating the AUDIO or SUBTITLE button. Try selecting it from the DVD
menu if one is available.
No remote control:
Check the batteries are installed with the correct polarities (+&-).
The batteries are depleted: replace them with new ones.
Point the remote control unit at the remote control sensor and
operate.
Remove the obstacles between the remote control unit and the
remote control sensor.
Angle cannot be changed:
This function is dependent on software availability. Even if a disc has a
number of angles recorded, these angles may be recorded for specific
scenes only.
Operate the remote control unit at a distance of not more than 8
meters from the remote control sensor.
No key operation (by the unit and/or the remote control) is effective:
Turn the unit off and then back to on. Alternatively, turn off the unit,
disconnect the AC power cord and the reconnect it. (The player may
not be operating properly due to lightning, static electricity or some
other external factor.)
Troubleshooting tips [SVCD/VCD]
No menu play:
This function works only for SVCDs/VCDs with playback control.
No MIC sound:
Ensure that the connection is proper.
Adjust MIC volume knobs at high level.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Definition of terms
Definition of terms
Definition of terms
Angle
PBC (or Playback control)
Recorded onto some DVD discs are scenes which have been
simultaneously shot from a number of different angles (the same
scene is shot from the front, front the left side, from the right side,
etc.). With such discs, the ANGLE button can be used to view the
scene from different angles.
This is recorded on a SVCD/VCD (2.0). The scenes or information to
be viewed (or listened to) can be selected interactively with the TV
monitor by looking at the menu shown on the TV monitor.
DVD
Track number
This refers to a high-density optical disc on which high-quality pictures
and sound have been recorded by means of digital signals. Incorpor-
ating a new video compression technology (MPEG II) and high-density
recording technology, DVD enables aesthetically pleasing full-motion
video to be recorded over long periods of time (for instance, a whole
movie can be recorded).
DVD has a structure consisting of two 0.6mm thin discs which are
adhered to each other. Since the thinner the disc, the higher the
density at which the information can be recorded, a DVD disc has a
greater capacity than a single 1.2mm thick disc. Since the two thin
discs are adhered to each other, there is the potential to achieve
double-sided play sometime in the future for even longer duration
play.
These numbers are assigned to the tracks which are recorded on
Video CDs. They enable specific tracks to be located quickly.
Time number
This indicates the play time which has elapsed from the start of a
disc or a title. It can be used to find a specific scene quickly. (It may
not work with some discs.)
Chapter number
These numbers are recorded on DVD discs. A title is subdivided into
many sections, each of which is numbered, and specific parts of video
presentations can be searched quickly using these numbers.
Region management information
Subtitles
These are the printed lines appearing at the bottom of the screen
which translate or transcribe the dialogue. They are recorded on
DVD discs.
The Region number for this DVD/SUPER VCD/VCD/CD player is 4.
4
18
Download from Www.Somanuals.com. All Manuals Search And Download.
P/N: 0700-D26500-04
Please fill the blanks with the model number and serial
number of this player for future reference
Serial No.:
Model no.:
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
|