DVD/CD/MP3 PLAYER
DVD2060DX
USER'S MANUAL
Please read this manual before connection and use.
PALSONIC
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USE
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS MANUAL AND
THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
safeguards incorporated in this unit will protect you if you observe the following procedures for installation,
use and servicing. This unit is transistorised and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read This Manual
After unpacking this product. Please read
the manual,operating and other instructions
carefully.
2. Ventilation
12. Burden
Openings in the cabinet are provided for ventilation
Do not place a heavy object on or step on the
and to ensure operation of the product. These openings
product. The object may fall causing serious
can protect it from overheating. These openings must not
personal injury and serious damage to the
be covered. The product should never be placed on a bed,
product.
sofa,rug or other.
13. Damage Requiring Service
3. Heat
Unplug this product service from the wall outlet
It should be situated away from heat sources radiators, heat
and refer servicing to qualified service
registers, stoves, or other products (including amplifiers)
personnel under the following conditions:
that produce heat.
A) When the power-supply cord or plug is damaged.
4. Water and Moisture
B) If liquid has been spilled, or objects have fallen
Do not use this product near water, for example, near a bowl,
into the product.
kitchen sink, or laundry tub, in a wet basement or near a
C) If the product has been exposed to rain or water.
swimming pool.
D) If the product does not operate normally by
5. Cleaning
following the operating instructions. Adjust only those
Unplug this product from the wall outlet before cleaning.
controls that are covered by the operating instructions
Do not use liquid cleaners or aerosol cleaners. Use a dry
as an improper adjustment of other control may
cloth for cleaning.
result in damage and will often require extensive work
6. Power-Cord Protection
by a qualified technician to restore the product to its
Power cords should be routed so that they are not likely
normal operation.
to be walked on or pinched by items placed upon.
E) If the product has been dropped or damaged in
7. Lightning
any way.
For added protection fort his product during storm, or
F) When the product exhibits a distinct change in
unattended and unused for long periods unplug it from the
performance-this indicates a need for service.
wall outlet. This will prevent product from lighting.
14. Servicing
8. Object and Liquid Entry
Do not attempt to service this product yourself as
Never push objects of any kind into this product or
opening or removing covers may expose you to
liquid of any kind on the product. It may touch dangerous
dangerous voltage or other hazards. Refer all
voltage points and parts of that could result in a fire or
servicing to qualified service personnel.
short circuit.
15. Replacement Parts
9. Attachments
When replacement parts are required, be sure the
Do not use attachments not recommended by the
service technician has used replacement parts
manufacturer as they may cause hazards.
specified by the manufacturer or have the same
10. Accessories
characteristics as the original part. Unauthorized
Do not place this product on an unstable cart, stand, or table
substitutions may result in fire, electric, shock,
The product may fall causing serious injury to a child or adult,
or other hazards.
and serious damage. Only with a cart, stand, tripod, bracket, or
16. Safety Check
table recommended by the manufacturer, or sold with the product.
Upon completion of any service or repairs to this
Any mounting of the product should follow the manufacturer's
product, ask the service technician to perform
instructions, and should use a mounting accessory recommended
safety Checks to determine that the product is in
by the manufacturer. A product and cart combination should be
proper operating condition.
moved with care. Quick stops excessive force and uneven
surfaces may cause the product and cart combination to
overturn.
11. Disc tray
Keep your fingers well clear of the disc tray as
it is closing. Neglecting to may cause serious
personal injury and damage to the product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USE
NOTES ON HANDLING
ON HANDLING DISCS
The top and rear panels of the unit may become warm
after a long period of use. This is not a malfunction.
When the unit is not use, be sure to remove the disc
and turn off the power.
Do not touch the play back side of the disc.
Do not attach paper or tape to disc.
If you do not use the unit for a long period, the unit
may not function properly in the future. Turn on and
use the unit occasionally.
Do not place foreign objects on the tray.
ON CLEANING DISCS
LOCATION
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the centre
outwards With a soft cloth. Always keep the disc clean.
Do not locate the unit in places such as:
Near heating devices or in enclosed car.
0
High temperature (40 C or higher) or high
humidity (90% or higher).
Dirty places.
If you can not wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or
antistatic spray for vinyl LPs. It may damage the disc.
Avoid direct exposure to sunshine
DISTURBANCE
When you place this unit near a TV, radio or VCR, the
playback picture may become poor and the sound may
be distorted. In this case, place the unit away from the
TV, radio or VCR.
ON STORING DISCS
Do not store discs in a place subject to direct sunlight
or near heat source.
NOTES ON MOISTURE CONDENSATION
Do not store discs in place subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
object on discs outside or their case may cause
warping.
The pickup may be condensed with water under the
following situation.
When you bring the unit directly from a cold place
To a warm place.
When you use the unit in a room where you just
turned on the heater, or a place where the cold air
from the air conditioner directly hits the unit.
During the summer, when you use the unit in a hot
and humid place just after you move the unit from
an air conditioned room.
STRUCTURE OF DISC CONTENTS
Normally,DVD discs are divided in to titles, and the titles
are sub-divided into chapters. Audio CD are divided
into tracks.
The room is vaporous or damp.
If condensation exists, the unit will not operate properly.
Remove the disc, connect the power cord of the unit to
the wall outlet, turn on the unit,and leave it for two or
three hours. After two or three hours, the unit will have
warmed up and evaporated any moisture. Keep the
unit connected to the wall outlet and moisture
condensation will seldom occur.
Each title, chapter, or track is assigned a number, which
is called title number, chapter number or track number
respectively.
There may be discs that do not have these numbers.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
TABLE OF CONTENTS
BEFORE USE
REFERENCE
17
21
22
23
Safety Precautions ----------------------------------------- 1
Important Safety Instructions ---------------------------- 2
System Setup -----------------------------------------------
Trouble Shooting --------------------------------------------
Symptoms and Corrections -----------------------------
System and Outputs ---------------------------------------
Notice ---------------------------------------------------------
DISC Protection --------------------------------------------
Special Function of DVD ---------------------------------
3
3
5
Function Supported by DVD ----------------------------- 5
Accessories -------------------------------------------------- 5
BASIC PLAYBACK
Preparations ------------------------------------------------- 6
Basic Playback ---------------------------------------------- 6
Stop Playback ----------------------------------------------- 6
Previous and Next -----------------------------------------
-
6
Fast forward and Fast reverse -------------------------- 6
Pause/Step Playback -------------------------------------
6
ADVANCED PLAYBACK
Remote Control Operation ------------------------------- 7
SPECIAL FUNCTION PLAYBACK
AUDIO CD Playback -------------------------------------- 16
JPEG Disc Playback -------------------------------------- 16
MP3 Playback ----------------------------------------------- 16
Kodak Picture CD Disc Playback ---------------------- 16
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USE
BEFORE USE
SETTING THE TV SCREEN
Multi-aspect ratio suit to different TV screen size.
TV
screen
4:3
16:9
Film
Normal
format
Full view
Mailbox
Widescreen
4:3
16:9
FUNCTIONS SUPPORTED BY DVD PLAYER
There are many functions available on DVD discs and
the functions vary per player and per manufacturer.
Picture proportion modes
Parent lock
Regional code and signal system
16:9
LB
Dolby digital surround sound
Number of languages
Subtitle languages
R RESTRICTED
Multi -angle
8
9
32
Closed Caption
CC
ACCESSORIES
Audio/Video cable
Remote control
Owner's manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Preparations
Previous and Next
During playing, press PREV key can back to start
of this chapter. then each press this key will skip a
chapter still the start of the disc.
If you want to view a disc, turn on the TV and
select the video input, and connect to the DVD player.
Each press of NEXT
key during playing will skip
Basic Playback
the current chapter and play the next one.
1. Press POWER switch on the front panel to turn on,
and the TV screen will display log.
The LED will display
Fast Forward and Fast Reverse
NO DISC if the DVD player has no disc in the tray.
If a disc is already in the tray, it will begin to play
the disc.
1. Press F.FWD
to fast forward through the disc.
Each time the F.FWD
button is pressed, the
fast forward motion speed changes.
2. Press ENTER/PLAY to resume normal playback.
2. Press OPEN / CLOSE to open the disc tray,
place a disc on the disc tray. There are two
different disc sizes. Place the disc in the
correct guide on the disc tray. If the disc is
off the guide, it may damage the disc and
cause the DVD player to malfunction.
Do not place a disc which is unplayable in
this DVD player.
3. Press F.REV
to fast reverse through the disc.
button is pressed, the
Each time the F.REV
fast reverse motion speed changes.
4. Press ENTER/PLAY to resume normal playback.
Pause/Step Playback
3. Press OPEN/CLOSE to close the
disc tray, the playback will automatically
start. Some discs may not playback
automatically.
You can press ENTER/PLAY button
to start playback, and also you may
start playback with a menu,cursor button
on the remote controller, select menu
options and press ENTER/PLAY or
press figures to select a menu options.
1. Press PAUSE/STEP
/
first time to pause play-
back (still mode). The sound will be muted during
still mode.
2. Press PAUSE/STEP
/
continuous to single step
3. forward to the next frame in the video.
Press ENTER/PLAY resume normal playback.
Standby Function
Under status of Non-disc or Stop, the DVD player
will automatically enter into stand by status after
25 minutes. Now press STANDBY key on the
remote control to restart the DVD player.
Stop Playback
1. Press the button to go to stop mode, the TV
screen will show the start logo, as some disc
the player can recall the location where stopped.
NOTES:
1. “
A “
” may appear on the TV screen during operation.
” means that the operation is not permitted by
2. Press ENTER/PLAY to playback to resume
playback from the location where play back is
stopped or from the beginning of the disc.
the unit or the disc.
2. This unit controlled by CPU, under setting mode,
there may be screen saver press any key to
activate the unit.
3. Press STOP twice to stop completely.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Remote Control Operation
IMPORTANT NOTE:
ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION
AND DISPLAY ON SCREEN WILL BE DIFFERENT.
POWER
During playback, press POWER to stop the player
and return to standby mode.
While the player is in standby, press POWER or any key
on the front panel to resume normal operation.
OPEN/CLOSE
To open the disc tray, press OPEN/CLOSE.
To Close the disc tray, press OPEN/CLOSE again
0-10+ Keys
These keys are used to input time, as well as
title, chapter and track numbers.
When a numeric item is displayed on the screen,
press 0-10+ keys to select the desired entry,
and press ENTER to confirm.
CLEAR
Press CLEAR to delete numbers you have selected.
Press once to delete on digit. Press and hold to
delete all digits.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
DISPLAY
During playback, press DISPLAY to display the current time counter position.
DVD
Elapsed time of the current track/chapter.
00:00:01 0:04:45
Press DISPLAY again to display additional information about the playing disc.
CD
VCD
Elapsed time of the current track.
Total tracks.
Disc type
CDDA
Track 1/15
00:00:01 0:04:45
Current track.
DVD
DVD
00:01:51 01:27:50
1/1
Title 1/1 Chapter 1/16 Angles
Audio
1/2
2ch Eng
1/1 Eng
Subtitle
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
SEARCH
During playback, press SEARCH, and the [Tack Search] menu will display as follows:
CD
VCD
Track Search
Time
-:--:--
---
Track
DVD
Note: 1 Time searches for an exact time in
the movie.
Search
Time
-:--:--
--/--
2 In Title/Chapter mode, you cannot
select a value outside the range of the
total number of titles or chapters.
Track/Chapter
3
For some DVD discs, the Search
Function is unavailable.
Use the number keys to input the desired Time, Title or Chapter, then press ENTER to confirm.
Press SEARCH again, the [Disc Search] menu will be displayed as follows:
CD
Track Search
Time
-:--:--
---
Track
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
During DVD or CD/VCD playback, press and hold
to
to scan forward. The player will review the disc at 2, 4, 8 and 16 time
normal speed as
follows.
X2
X4
X8
X16
play
Press PLAY to resume normal playback.
During DVD or CD/VCD playback, press and hold
to scan in reverse.
The player will review the disc at 2, 4, 8 and 20 time normal speed as
follows.
X2
X4
X8
X16
play
Press PLAY to resume normal playback.
STOP
Press STOP once during playback to stop and hold playback.
Press PLAY to resume playback from the point you pressed STOP
Press STOP twice to stop playback completely.
PAUSE
Press PAUSE during playback to pause playback.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
PLAY
Press PLAY from stop mode to start playback
This function is not available if the elapsed time of current
track is less than 10 seconds.
Note: MP3 disc and some DVD discs do not have a 10 second review feature.
DISC MENU
During DVD, press MENU to return to the program menu.
In the Setup Menu, press MENU to return to the main menu
or play mode.
Any time, press MENU to cancel the current OSD or some menus.
Note: This function is subject to the discs.
TITLE
During DVD playback, press TITLE key to display the DVD title
menu or play the first title.
Note: This function is subject to the discs.
A-B
During playback, press A-B to select A
Press it again to select B. The player will repeat the section from A
to B automatically.
Press A-B a third time to cancel A-B repeat and clear points A and B.
Note: 1. During CD/SVCD playback, points A and B must be within the same track.
During DVD playback, points A and B can be selected from different chapters.
2. This function is subject to the disc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Please use the [PROG] mode under the state stopping!
While [PROG] is on, press ENTER to display the [Program] submenu:
Input the track numbers in the order you would like them to
play. When finished, select [Play Program] and then press ENTER to
play the tracks in the new programmed order.
Select [Clear All] and press ENTER to clear all the numbers
you have input.
Input the title number and the chapter number in the desired
order. Then select [Play Program] and press ENTER to play the
chapters in the order you have set.
Select [Clear All] and press ENTER to clear all the numbers
you have input.
PROGRAM
During playback is stopped, press PROGRAM button twice to
switch to progressive scan mode.
Press PROGRAM once to switch back to interlace scan mode.
Note: If you have connected the DVD player to your TV using the
component Video Output, you can use PROGRAM button to switch
to progressive scan for superior video quality.
PREV
NEXT
Press PREV to skip to the previous chapter or track.
Press NEXT to skip to the next chapter or track.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
N/P
Press N/P when in STOP mode to select the mode
from NTSC/PAL/AUTO.
SLOW
Press SLOW repeatedly to SLOW DOWN motion playback at
variable speeds.
STEP
Press STEP during playback to pause playback.
Press STEP repeatedly to play frame.
Press PLAY to resume normal playback.
Select to press REPEAT to select Repeat Title, Repeat chapter,
Repeat off during DVD playback.
REPEAT
Press REPEAT to select Repeat Single, Repeat All and Repeat
off when PBC is off (VCD, CD, SVCD).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
RETURN
Press RETURN to the main menu when PBC is on.
VOL+ VOL-
Press <VOL+> button to increase Volume.
Press <VOL-> button to reduce volume till no volume output.
PBC
During VCD playback.
Press PBC (playback control) to select PBC on and off.
MUTE
Press MUTE to mute the Audio output.
Press MUTE again to resume normal audio output.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
ZOOM
ANGLE
AUDIO
During VCD/SVCD/DVD playback, press ZOOM to magnify the image
as follows:
Q1
Q2
Q3
Q Off
During DVD playback
Press ANGLE to view scenes from different camera angles.
Press ANGLE repeatedly to change from one camera angle to another.
Note: This function is disc specific.
During CD/VCD/SVCD playback
Press AUDIO to select a audio channel (STEREO, LEFT, RIGHT etc)
During DVD playback
Press AUDIO repeatedly to select from up to 8 audio languages/formats.
During SVCD playback
Press AUDIO repeatedly to select from up to 4 audio languages/formats.
Note: This function is disc specific.
SUBTITLE
During DVD playback
Press SUBTITLE repeatedly to select from up to 32
subtitle languages.
Note: This function is subject to the disc.
(languages will vary).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FUNCTION PLAYBACK
AUDIO CD PLAYBACK
03 18 05 28
058/158
When playing Audio CD disc, a navigation menu will be displayed
automatically if the disc is loaded in succession.
In the menu, use UP or DOWN button in the cursors to select the
file, then press "ENTER/PLAY" to play this file, in this page, press
PREV or NEXT can go to the previous or next page.
TRACK01
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
Note: CD+G disc the same as Audio CD (when disc playing,
press STOP button can return to navigation menu).
MP3 PLAYBACK
When playing MP3 disc, a navigation menu will be displayed
automatically if the disc is loaded in succession.
03 18 05 28
058/158
In the menu, use UP or DOWN button in the cursors to choose
folder, then press "ENTER/PLAY" button to confirm. In the folder,
use UP or DOWN button in the cursors to select the file, then press
"ENTER/PLAY" to play this file. In this page, use LEFT button in
the cursors can return previous menu, press PREV or NEXT can go
to the previous or next page.
MP3 - - - - - - -
MP3 - - - - - - -
MP3 - - - - - - -
MP3 - - - - - - -
MP3 - - - - - - -
MP3 - - - - - - -
KODAK PICTURE CD DISC PLAYBACK
When playing Kodak Picture CD disc,a navigation menu will be displayed automatically if the disc is loaded
in succession. In the menu. Use UP or DOWN in the cursor to choose folder, then press "ENTER/PLAY" button
to confirm. In the folder, use UP or DOWN in the cursor to select a file, then press "ENTER/PLAY" to play
Each picture in the Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled
to tilt in the whole TV screen. If you want to return the menu, press MENU button.
If you desire to display an image indefinitely, press the PAUSE button. To view the next or previous picture,
press NEXT or PREVIOUS button. To resume the slide-show, press the "ENTER/PLAY" button.
IMPORTANT NOTE: Quality of pictures displayed on the screen is highly dependent on the viewing device.
JPEG DISC PLAYBACK
When playing JPEG disc, a navigation menu will be displayed automatically if the disc is loaded in succession.
In the menu, use UP or DOWN in the cursor to select a file, then press "ENTER/PLAY", the file will be play with
a slide-show, press PREV or NEXT to select the previous or the next picture. Press PAUSE to pause the
current picture for enjoying, when press ENTER/PLAY, it will return to normal playing.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
When you press SETUP key on the remote control,
the setup menu will be displayed.
1.2 ANGLE MARK
1. Within the setup menu, you can use UP, DOWN,
LEFT and RIGHT buttons on the remote control
to move the cursor, and then press the
ENTER/PLAY button to make your selection.
Press LEFT can return the previous menu.
2. To exit setup menu, you can press SETUP
menu.
ANGLE MARK: Users can select a particular camera
angle when playing a DVD which offers multiple
angles.
General
Audio
Dolby
Video
Preferences
- - General Setup Page - -
Tv Display
Angle Mark
Osd Lang
Ps
Off
Eng
Off
Off
On
Off
1. GENERAL SETUP PAGE
Captions
Screen Saver
Set up TV screen format, video type and all DVD
functions.
Angle Mark
1.1 TV DISPLAY
1.3 OSD LANGUAGE
General
Audio
Dolby
Video
Preferences
- - General Setup Page - -
On Screen Display (OSD) Language: Users can
select the whole setup menu and on-screen display
language.
Tv Display
Angle Mark
Osd Lang
Ps
Normal/Pa
Normal/Lb
Wide
Off
Eng
Off
Off
Captions
General
Audio
Dolby
Video
Preferences
Screen Saver
- - General Setup Page - -
Tv Display
Angle Mark
Osd Lang
Ps
Set TV Display Mode
Off
Eng
Off
Off
English
French
German
Italian
Spanish
Portuguese
Captions
The TV Display which select the different ratio of
display format and the screen of TV. There are
various types of display on screen for different
matches between Disc and TV (Please see page 20;
Multi-image ratio mode)
Screen Saver
Set Osd Language
1.4 CAPTIONS
No matter which display format is selected, a
picture recorded in standard 4:3 format always
displays in the 4:3 aspect ratio.
CAPTIONS: For hearing-impaired people. The picture
can be displayed with recorded explanatory captions.
Note: It is valid for disc that has captions.
The display format of DVD titles may vary; please
refer to the information that accompanies your
specific DVD title.
General
Audio
Dolby
Video
Preferences
- - General Setup Page - -
If the DVD title is recorded in 16:9 wide display
format while the TV is a standard 4:3 screen,
horizontal compression of the image will result.
Some DVD titles may be recorded in special
formats. In such cases, the DVD titles will always
appear on the screen in their original format,
regardless of which TV display format you select.
Tv Display
Angle Mark
Osd Lang
Ps
Off
Eng
Off
Off
Captions
On
Off
Screen Saver
Angle Mark
17
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
1.5 SCREEN SAVER
2.2 SPDIF OUTPUT
SPDIF OUTPUT MODE: Sets the audio outputs.
Under the status of SPDIF/RAM, can not adjust
volume of DVD, CD, can adjust only under MP3
format.
General
Audio
Dolby
Video
Preferences
- - General Setup Page - -
Tv Display
Angle Mark
Osd Lang
Ps
Off
Eng
General
Audio
Dolby
Video
Preferences
Spdif Output
Captions
On
Off
- - Digital Audio Setup Page - -
Spdif Output
Off
Off
Screen Saver
Spdif Off
Spdif/Raw
Spdif/Pcm
Screen Saver
Screen Saver: When the unit is in stop mode,a moving
picture will appear several minutes later if screen saver
is set on. Screen saver will protect the TV screen.
Setup Spdif
2. SPEAKER SETUP PAGE
This DVD player includes three kinds of audio output:
1. SPDIF OFF: An analog surround sound format is
output through the back-panel connections for 2-CH
audio out.
2.1 SPEAKER SETUP PAGE
DOWNMIX MODE: Sets front speakers to LT/RT,
STEREO.
SPDIF/RAW or SPDIF/PCM: This surround sound
format is output to a Dolby Digital decoder through
the optical and coaxial connectors on the back-
panel of the product.
2.
General
- - Speaker Setup Page - -
Dynamic Stereo
Audio
Dolby
Video
Preferences
Lt/Rt
Stereo
Set Downmix Mode
Down mix:
1 means LT/RT output
2 means STEREO output
In LT/RT or stereo mode,the centre speaker and
sub woofer on this page can not setup,only can
if 5.1 channel output.
Test tone: in 5.1 channel mode,setup this item
in the case of opening disc tray or stopping play.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
4.3 TV MODE SETUP PAGE
3. DOLBY DIGITAL SETUP PAGE
3.1 DUAL MONO
TV MODE: Sets the scan mode of your TV.
If there are picture interferences or no picture
please press “V.MODE” to correct it.
DUAL MONO: If your amplifier/decoder has
Dolby Digital output,you may select stereo, left
mono,right mono, or mixed mono mode for your
amplifier decoder.
General
Audio
Dolby
Video
Preferences
Video Setup Page
General
Audio
Dolby
Video
Preferences
Component
Scan Mode
Sharpness
Brightness
Contrast
Yuv
P-Scan
Interlace
- - Dolby Digital Setup - -
Low
00
Dual Mono
Dynamic
Stereo
00
L-Mono
R-Mono
Mix-Mono
Set P-Scan On/Off
Dual Mono (1+1) Setup
4.3 SHARPNESS
3.1 DYNAMIC
SHARPNESS: Sets the sharpness level of video
DYNAMIC: This function is generally used when
playing high volume programs at night, in order
not to disturb the neighbour. This setting can dyna-
mically lower the volume and still keep the original
tone quality, This is the range, measured in deci-
bels(dB), between the loudest and the quietest
sound registers in a sound track.
output.
General
Audio
Dolby
Video
Preferences
Video Setup Page
Component
Scan Mode
Sharpness
Brightness
Contrast
Yuv
High
Medium
Low
Low
00
General
Audio
Dolby
Video
Preferences
00
- - Dolby Digital Setup - -
Dual Mono
Dynamic
FULL
Sharpness
3/4
1/2
1/4
OFF
4.4 BRIGHTNESS
Set Drc OFF
BRIGHTNESS: Sets the brightness level of video
output.
4. VIDEO SETUP PAGE
General
Audio
Dolby
Video
Preferences
4.1 COMPONENT
Video Setup Page
COMPONENT: Sets the video output.
Component
Scan Mode
Sharpness
Brightness
Contrast
Yuv
General
Audio
Dolby
Video
Preferences
Low
00
Video Setup Page
Component
Scan Mode
Sharpness
Brightness
Contrast
Yuv
CVAS
Yes
00
Low
00
00
Brightness
Press right button the TV will display below.
Component
19
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
General
Audio
Dolby
Video
Preferences
5.1 TV TYPE
TV TYPE: This player supports different TV output,
including MULTI(Auto), NTSC, and PAL systems.
If your TV support only NTSC or PAL and had you
•
Brightness
0
inadvertently selected the wrong TV type, the TV
screen will become flickering and black-and-white.
In this case, you should press the SETUP button
to set as following Note.
Press LEFT/ RIGHT button to adjust, then press
ENTER/PLAY button to confirm and return upon
menu.
General
Audio
Dolby
Video
Preferences
- - Preference Page - -
Tv Type
Audio
Pal
Pal
Auto
Ntsc
Eng
Eng
Eng
Subtitle
Disc Menu
Parenta
Password
Default
4.5 CONTRAST
CONTRAST: Sets the contrast level of Video output.
General
Audio
Dolby
Video
Preferences
Set Tv Standard
Video Setup Page
Note: How to Set the TV Type?
• You may switch the NTSC/PAL setting of the DVD
player to match the video signal of your TV.
• The table below shows what kinds of disc are com-
patible with each setting (Auto, PAL and NTSC)
Component
Scan Mode
Sharpness
Brightness
Contrast
Yuv
Low
00
00
Disc
Output Format
Contrast
Selected TV System Mode
Type
DVD
Format
Press right button the TV will display below.
NTSC
NTSC
PAL
PAL
MULTI
NTSC
PAL
NTSC
PAL
General
Audio
Dolby
Video
Preferences
PAL
5.2 AUDIO
Contrast
0
AUDIO: Sets the preferred audio language as the
default when playing DVD. (If DVD support these
languages)
General
Audio
Dolby
Video
Preferences
Press LEFT/RIGHT button to adjust, then press
ENTER/PLAY button to confirm and return upon
menu.
- - Preference Page - -
Tv Type
Audio
Pal
English
French
Eng
Eng
Eng
Spanish
Chinese
Japanese
Korean
German
Italian
Subtitle
Disc Menu
Parenta
Password
Default
5 PREFERENCE SETUP PAGE
The preference setting is active only when no disc.
and the setting is effective on each time power on till
exchanging the saved setting.
Preference Audio Language
20
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
5.3 SUBTITLE
5.6 PASSWORD MODE
PASSWORD CHANGE: You can change the pass-
word: please type 6 numerals as new password.
Note: Be sure to remember the new password.
SUBTITLE: Sets the preferred subtitle language as
the default when playing DVD. (if DVD support these
languages)
General
Audio
Dolby
Video
Preferences
General
Audio
Dolby
Video
Preferences
- - Preference Page - -
- - Preference Page - -
Tv Type
Audio
Pal
English
French
Tv Type
Audio
Pal
Eng
Eng
Eng
Eng
Eng
Eng
Spanish
Chinese
Japanese
Korean
German
Italian
Subtitle
Disc Menu
Parenta
Password
Default
Subtitle
Disc Menu
Parenta
Password
Default
Change
Preference Subtitle Language
Change Password
General
Audio
Dolby
Video
Preferences
5.4 DISC MENU
DISC MENU: Sets the preferred menu language as
the default when playing DVD. (if DVD support these
languages)
Old Password
New Password
Confirm Pwd
General
Audio
Dolby
Video
Preferences
OK
- - Preference Page - -
Tv Type
Audio
Pal
English
French
Eng
Eng
Eng
Spanish
Chinese
Japanese
Korean
German
Italian
Subtitle
Disc Menu
Parenta
Password
Default
Note:
If you change this set, you must input password
(Initial password: 8888)
Preference Menu Language
5.7 DEFAULT
5.5 PARENTAL
DEFAULT: Resets to all the manufacturer's original
settings for this DVD player (except password). Press
ENTER/PLAY to perform the reset.
PARENTAL: The parental control function works in
conjunction with the different censorship classes
assigned to DVDs. These classes help to control the
types of DVDs that the family watches, There are up
to 8 censorship classes for DVDs.
General
Audio
Dolby
Video
Preferences
- - Preference Page - -
General
Audio
Dolby
Video
Preferences
Tv Type
Audio
Pal
Eng
Eng
Eng
- - Preference Page - -
Subtitle
Disc Menu
Parenta
Password
Default
Tv Type
Audio
Pal
1. Kid Saf
2. G
3. Pg
4. Pg 13
5. Pgr
6. R
Eng
Eng
Eng
Subtitle
Disc Menu
Parenta
Password
Default
Reset
Load Factory Settings
7. NC 17
8. Audio
Set Parental Control
21
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
Please check the following guide for the possible cause and solution for a problem before contacting the
nearest service centre or dealer for repairs.
SYMPTOMS AND CORRECTIONS
CORRECTIONS
SYMPTOMS
Check to make sure that the power connection is secure.
No power
Make sure the connection between the player and the TV is secure.
Make sure that the TV is in good working condition.
No picture
Press "V.MODE" button continuously until it appear normal
picture.
Make sure the connection between the player and other devices
are secure.
No sound
Make sure that the TV and AMP are in good working condition
and setup properly.
Check that the disc is properly inserted.
Failed to Play
Clean the disc.
Remove obstacles between remote control and unit.
Failed to respond to
remote control
Aim remote control at the sensor on the front panel
Check batteries and replace them if necessary.
Check the disc for dirt and scratches, Clean or replace disc.
Shut down the unit, wait ten seconds, and restart the unit.
Picture Disturbance
Failed to work
with keys
Power surges or brown outs or other electrical phenomena.
Shut down the unit, wait ten seconds, and restart the unit.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE
System and Outputs
VF Signal
system
NTSC/PAL
CD: 20Hz-20KHz(EIAJ)
DVD: 20Hz-44KHz(96KHz) (Sample result)
20Hz-22KHz(48KHz)(Sample result)
Frequence
response
Audio S/N ratio
Video/Picture
>90 dB
MPEG1 V2.0; MPEG2
MPEG LAYER2 standard
Audio
Audio output
(analog audio)
Electric level output: 1.0 ~ 2.0V
Electric level output: 0.5Vp--p
Electric level output: (1.0±0.2) Vp--p
Resistance:10KS
Audio output
(digital audio)
Resistance: 75S
Video output
Resistance: 75S Unbalanced negative
Electric level output: Brightness (Y) 1.0Vp--p
Resistance: 75S
S-Video output
Chrominance (C): 0,286Vp--p, Resistance:75S
Component video
(Y, CB, CR)
Electric level output: 0.7Vp--p resistance: 75S
Note: We reserve the right to modify the design without advice!
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PALSONIC
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
|