Battery Charger
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Battery Charger and the AC
charger that came with your smartphone or
another power supply approved by Palm,
you can be sure that your smartphone
battery is ready to use whenever you
need it.
Introduction
The Palm® Battery Charger is a convenient,
pocket-sized traveler’s charger for various
Palm® smartphone batteries.
NOTE To find compatible smartphone
I N T R O D U C T I O N
3
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Connect the AC charger to a wall outlet.
Using your Battery
Charger
Check the indicator light to confirm that
the smartphone battery is being
charged.
To charge a smartphone battery with your
Battery Charger, do the following:
1
Grasping both sides of the lid, open the
Battery Charger.
2
Insert a smartphone battery into the
Battery Charger so that the battery
contacts align with the contacts in the
Battery Charger.
3
4
Close the lid until it lightly snaps shut.
Use the AC charger
included with your
smartphone
Connect the battery charger to the AC
charger that came with your
smartphone.
NOTE Connecting other power supplies to
the Battery Charger may damage or
destroy your smartphone battery. Use only
power supplies that are approved by Palm.
For more information, go to
U S I N G
B A T T E R Y C H A R G E R
Y O UDRownload from Www.Somanuals.com. All Manuals Search And Download.
4
Indicator lights
Caring for your
Battery Charger
Solid red indicates that the smartphone
battery is being charged.
Solid green indicates that the smartphone
battery is charged.
General information
•
Use only the AC charger that came with
your smartphone, a Palm® Vehicle
Power Charger, or another power supply
approved by Palm.
Solid yellow indicates that the battery
being charged has become too hot or too
cold to safely charge. Move the Battery
Charger to a location that is at room
temperature.
CAUTION Use only power supplies
approved by Palm. Unapproved power
supplies could damage the Battery Charger
or the battery being charged and may
cause personal injury.
Flashing yellow indicates a damaged
smartphone battery or a power–supply
error.
CAUTION If the indicator light is flashing
yellow, immediately disconnect your
Battery Charger. Be sure you are using a
functional Palm smartphone battery as well
as a functional Palm charger.
•
•
Don’t use the Battery Charger in areas
where sparks could pose a hazard.
Don’t let the Battery Charger’s metal
contacts or electrical socket come in
contact with metal objects.
NOTE For additional troubleshooting
information about your Battery Charger, go
•
•
Don’t expose the Battery Charger or
your spare batteries to rain or other
liquids.
Avoid using the Battery Charger at high
temperatures (above 65°C/149°F), such
as in a hot vehicle or in direct sunlight.
C A R I N G F O R
C H A R G E R
Download from Www.Somanuals.com. All Manuals SearchYAOnUdRDBowA TnlToEaRdY.
5
•
Keep the metal contacts and the
electrical socket on the Battery Charger
clean and free from debris that could
obstruct charging or could cause a short
circuit.
•
Never dispose of a battery by
incineration.
CAUTION Burning a battery may cause an
explosion and personal injury.
•
Be sure to dispose of your battery in an
environmentally responsible and legal
way.
Battery safety and disposal information
•
Keep the metal contacts on the battery
clean.
NOTE In some areas, the disposal of
batteries in household or business trash
may be prohibited. For battery disposal
instructions, visit www.palm.com/
•
Don’t attempt to disassemble or
short-circuit the battery.
CAUTION To avoid being burned, do not
handle a damaged or leaking lithium-ion
(Li-ion) battery.
C A R I N G
C H A R G E R
F ODRoYwOnlUoRadBfAroTmT EWRwY w.Somanuals.com. All Manuals Search And Download.
6
IMPORTANT Changes or modifications not covered in this manual
must be approved in writing by the manufacturer’s Regulatory
Engineering Department. Changes or modifications made without
written approval may void the user’s authority to operate this
equipment.
Important safety and
legal information
Responsible party:
FCC statement
Palm, Inc.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
950 W. Maude Avenue
Sunnyvale, CA 94085-2801
United States of America
(408) 617-7000
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Battery Charger
Tested to Comply
With FCC Standard
FOR HOME OR OFFICE USE
Canadian ICES-003 statement
•
•
•
Reorient or relocate the receiving antenna.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Cet appareil numérique de la classe B respecte toutes les exigences
du Réglement sur le matériel brouilleur du Canada. Son utilisation est
sujette aux deux conditions suivantes: (1) Cet appareil ne doit pas
produire d’interférences nuisibles et (2) il doit pouvoir supporter toute
interférence reçue, même si ces interférences perturbent son
fonctionnement.
The use of shielded I/O cables is required when connecting this
equipment to any and all optional peripheral or host devices. Failure
to do so may violate FCC rules.
I M P O R T A N T S A F E T Y A N D
I N F O R M A T I O N
Download from Www.Somanuals.com. All Manuals Search AndLDEoGwAnLload.
7
Devices that you carry with you, such as your Palm device, build up
ESD in a unique way because the static electricity that may have built
up on your body is automatically passed to the device. Then, when
the device is connected to another device such as a docking station, a
discharge event can occur.
CE compliance statement
This product was tested by Palm, Inc. and found to comply with all
the requirements of the EMC Directive 89/336/EEC as amended.
Palm Take Back and Recycling Program
Precautions against ESD Make sure to discharge any built-up static
electricity from yourself and your electronic devices before touching
an electronic device or connecting one device to another. The
recommendation from Palm is that you take this precaution before
connecting your Palm device to your computer, placing a device in a
cradle, or connecting it to any other device. You can do this in many
ways, including the following:
This symbol indicates that Palm products should be
recycled and not be disposed of in unsorted municipal
waste. Palm products should be sent to a facility that
properly recycles electrical and electronic equipment.
For information on environmental programs visit:
As part of Palm's corporate commitment to be a good steward of the
environment, we strive to use environmentally friendly materials,
reduce waste, and develop the highest standards in electronics
recycling. Our recycling program keeps Palm handheld devices,
smartphones, and mobile companions out of landfills through
evaluation and disposition for reuse and recycling.
•
Ground yourself when you're holding your device by
simultaneously touching a metal surface that is at earth ground.
For example, if your computer has a metal case and is plugged
into a standard three-prong grounded outlet, touching the case
should discharge the ESD on your body.
•
•
Increase the relative humidity of your environment.
Palm customers may participate in the recycling program free of
about how you can help reduce electronic waste.
Install ESD-specific prevention items, such as grounding mats.
Conditions that enhance ESD occurrences Conditions that can
contribute to the buildup of static electricity in the environment
include the following:
Static Electricity, ESD, and Your Palm Device
Description of ESD Static electricity is an electrical charge caused by
the buildup of excess electrons on the surface of a material. To most
people, static electricity and ESD are nothing more than annoyances.
For example, after walking over a carpet while scuffing your feet,
building up electrons on your body, you may get a shock—the
discharge event—when you touch a metal doorknob. This little shock
discharges the built-up static electricity.
•
•
Low relative humidity.
Material type. (The type of material gathering the charge. For
example, synthetics are more prone to static buildup than natural
fibers like cotton.)
•
The rapidity with which you touch, connect, or disconnect
electronic devices.
ESD-susceptible equipment Even a small amount of ESD can harm
circuitry, so when working with electronic devices, take measures to
help protect your electronic devices, including your Palm® device,
from ESD harm. While Palm has built protections against ESD into its
products, ESD unfortunately exists and, unless neutralized, could
build up to levels that could harm your equipment. Any electronic
device that contains an external entry point for plugging in anything
from cables to docking stations is susceptible to entry of ESD.
While you should always take appropriate precautions to discharge
static electricity, if you are in an environment where you notice ESD
events, you may want to take extra precautions to protect your
electronic equipment against ESD.
I M P O R T A N T S A F E T Y
L E G A L
Download fAroNmD Www.SoImNaFnOuRaMls.AcToImO.NAll Manuals Search And Download.
8
|