Enhanced Cube Subwoofer
ECS-10
Owner’s Manual
Version 1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Outlaw Audio Enhanced Cube Subwoofer ECS-10
Table of Contents
Outlaw Audio
2
3
3
3
3
4
5
5
5
Please Read First
Table of Contents
Outlaw Audio Enhanced Cube Subwoofer ECS-10
Unpacking
Before You Begin
Subwoofers, Bass and Overall System Performance
ECS-10’s Controls and Connections
Setup Guide
Enhanced Cube Subwoofer
ECS-10
Congratulations on the purchase of an Outlaw Audio ECS-10 Enhanced Cube
Subwoofer. TheECS-10 providesdeep, tight, bassextensionthat’s powerfulenough
to meet the most demanding requirements of any movie or musical source.
Thanks to a flexible crossover system that may be defeated for use with advanced
bass management systems, the ECS-10 blends seamlessly with both small satellite
speakers as well as large tower type speaker systems.
Connecting to Your System
5
Connecting to a System with a Subwoofer Preamp Output
6
Connecting to a System without a Subwoofer Preamp Output,
but with Standard Left/Right Preamp Outputs
The ECS-10’s high-power and long-throw woofer are housed in a cabinet that
measures just over a cubic foot, ensuring that your new subwoofer can be tucked
away out-of-sight in almost any listening environment.
7
8
8
8
8
Connecting to a System with no Preamp Outputs
Subwoofer Placement
Notes On Subwoofer Placement
Setting the ECS-10’s Controls
Phase Switch
Among the ECS-10’s many features are:
■
A long throw 10” driver for deep bass extension
■
Oversized spider for increased linearity at high excursion
■
A powerful 1,000 watt RMS (2000 watts dynamic) amplifier for precision
8
Variable Crossover
driver control
8
9
9
Volume Level
■
Signal Sense for automatic turn on/off (can be defeated)
The Scattered Subwoofer System (Two ECS-10’s)
What’s Needed to Connect Two Subwoofers?
Placement and Level Control
Care and Maintenance
Cleaning
■
0/180-degree phase control
■
Stereo line level and speaker level inputs
9
9
9
■
LFE input
Unpacking
9
When You Are Away
The carton and packing materials used in shipping your new subwoofer were
specially designed to cushion it from the shocks and vibrations of shipping. We
strongly suggest that you save the carton and packing materials to use if you move,
or if the unit ever needs to be shipped back to us for any reason.
9
9
Troubleshooting
Troubleshooting Guide
10
Outlaw Service Information
10 The Outlaw Audio 30-Day Satisfaction Guarantee
10 ECS-10 Enhanced Cube Subwoofer Specifications
11 Outlaw Audio Limited Warranty
Tominimizethesizeofthecartoninstorage, youmaywishtoflattenitbycarefully
opening the top and bottom flaps and folding the carton flat. Packing materials
that cannot be collapsed should be saved along with the carton in a plastic bag.
Before You Begin
Before proceeding with the integration of the ECS-10 into your system, please
observe the following precautions and suggestions.
■
Do not plug the power cord into the ECS-10 until all other connections are
made.
■
Always refer to the instructions that came with the receiver or processor for
specific procedures, warnings and options.
The contents of this manual are Copyright © 2009 by Outlaw Audio, LLC, and may not be
duplicated or reproduced by any means, whether physical, electronic or otherwise without
prior written consent from Outlaw Audio.
■
Make sure to insert all plugs and connectors securely. Improper connections
can result in noise, poor performance, or damage to the equipment.
■
Do not bundle the subwoofer cable or speaker wire with the power cord. This
Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio, LLC.
may adversely affect the sound quality and introduce unwanted hum into
your system.
Specifications are those in effect at the time of printing. Outlaw Audio reserves the right
to change specifications or designs at any time without notice or obligation to modify
existing units.
ECS-10 Enhanced Cube Subwoofer
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Subwoofers, Bass and Overall System Performance
bottom two octaves of sound (20 Hz to 80 Hz) are frequently rolled off or not
reproduced at all. Here, too, a specialized speaker/amplifier combination is
required to deliver the full spectrum of sound from a system.
Subwoofers, Bass and Overall
System Performance
The goal of an audio system is to recreate the source material as accurately as
possible. The components needed to perform this task are an audio source, a
receiver or processor/amplifier combination, and speakers.
Finally, many multi-channel digital soundtracks contain a special audio channel
devoted specifically to extreme low frequency extension. This signal is the “.1” in
5.1, 6.1 and 7.1 systems and is sometimes referred to as the LFE channel.
In the era of digital, multi-channel sound, many listeners have chosen to use
frequency-limited“satellite”speakersforthefront, centerandsurroundchannels.
By limiting their frequency range, these speakers may be made smaller, to more
easily fit into a wide range of spaces. However, by eliminating the capability to
reproduce bass frequencies, a separate speaker that is custom designed to deal
with signals below 200Hz is required. That speaker, along with its companion,
built-in amplifier is a powered subwoofer.
Regardless of which of these situations create the need, a subwoofer is absolutely
essential for accurate audio reproduction of both movies and music. A properly
designed subwoofer such as the Outlaw ECS-10 can provide a visceral impact
that most speakers are not able to provide on their own. No matter what type of
speakers comprise the rest of your system or what your favorite movie or music
is the ECS-10 is up to the task of completing the sonic presentation by providing
the impact that only a subwoofer can provide.
Even in two-channel systems with traditional bookshelf or tower speakers the
ECS-10 Rear Panel
A
SUBWOOFER
VOLUME
B
MIN
MAX
INACTIVE
ACTIVE
C
AUTO ON/OFF
80 Hz
ECS-10
LOW-PASS
CROSSOVER
D
120 Hz
40 Hz
INTERNAL
X-OVER
SUBWOOFER
DIRECT
E
F
POWER
ON
180°
PHASE
R
L
OUTPUT
G
H
INPUT
OFF
LFE
SPEAKER LEVEL INPUT
+
-
-
+
R
L
120V~
60HZ
8A
I
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR
AVIS:
4
Outlaw Audio
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Setup Guide
The ECS-10’s Controls and Connections
Setup Guide
A
MASTER POWER Switch
Connecting To Your System
This switch is used to turn the ECS-10 on or off. When the unit will not be
used for extended periods, we recommend that it be turned off to prevent
accidental activation.
To get the maximum performance from your new ECS-10 it must be properly
connected, positioned properly within the room and configured to match your
speakers. To connect the ECS-10 you will need either a single audio interconnect
cable (in the case of systems with a subwoofer output), a pair of audio intercon-
nects (in the case of systems without a left/right pre-amp outpt) or additional
speaker wire. We recommend the Outlaw Audio PCA SUB cable, but any high
quality, shielded audio interconnect will work properly.
B
C
SUBWOOFER VOLUME Control
This knob controls the output level of the ECS-10.
AUTO ON/OFF Power Switch
This switch enables the ECS-10’s signal sense mode so that the unit turns on
automatically when an audio signal is present.
Connecting to a System with a Subwoofer
Preamp Output
If a low-level subwoofer output is available, use this jack to connect your ECS
subwoofer to your Preamp or Receiver. See Diagram 1 below.
D
E
LOW-PASS CROSSOVER Control
This control sets the frequency of the built in variable low pass crossover.
X-OVER Switch
To connect the ECS-10 to a subwoofer preamp output:
When an external crossover such as the Outlaw Audio ICBM is used, this
switch will bypass the ECS-10’s internal crossover.
1. Turn off all system components and unplug the processor or receiver
and the ECS-10 from their AC power source.
F
PHASE Switch
2. Locate the “Subwoofer/LFE Output“ on the rear panel of your receiver
This control changes the phase of the ECS-10 with respect to the main
speakers.
or processor.
Any audio product that decodes Dolby Digital or DTS soundtracks will have
this type of jack. Depending on the particular brand or model, this RCA
jack may be labeled “Sub,” “Subwoofer,” or “LFE Out.” If your receiver
or processor does not have this type of output you will need to follow the
“Connecting to a System with No Preamp Outputs“ instructions that fol-
low this section.
G
H
LINE LEVEL OUT
Connect these bandwidth limited outputs to your power amplifier.
LFE
Connect the subwoofer output or stereo preamp outputs of your receiver,
processor or other source device or accessory to this jack(s).
3. Connect one end of the subwoofer cable to the subwoofer or LFE output
I
HIGH LEVEL INPUTS
on the receiver or processor.
When your receiver does not have line level outputs available for a subwoofer
connection, connect the speaker outputs of the receiver here.
4. Locate the connection labeled LFE on the rear panel of the ECS-10 and
connect the other end of the subwoofer cable to that jack.
Diagram 1: Connecting to a System with a Subwoofer Preamp Output
SUBWOOFER
VOLUME
MIN
MAX
INACTIVE
ACTIVE
AUTO ON/OFF
80 Hz
ECS-10
LOW-PASS
CROSSOVER
120 Hz
40 Hz
INTERNAL
X-OVER
SUBWOOFER
DIRECT
POWER
180°
PHASE
R
ON
L
OUTPUT
INPUT
OFF
LFE
SPEAKER LEVEL INPUT
+
-
-
+
R
L
120V~
60HZ
8A
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE
ECS-10
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR
AVIS:
ECS-10 Enhanced Cube Subwoofer
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Wiring Diagrams
Diagram 2: Connecting to a System without a Subwoofer Preamp Output,
but with Standard Left/Right Preamp Outputs
INPUT
INPUT
INPUT
INPUT
FRONT RIGHT
FRONT LEFT
CENTER
SURROUND RIGHT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
+
+
+
+
SUBWOOFER
VOLUME
-
-
-
-
MIN
INACTIVE
MAX
ACTIVE
AUTO ON/OFF
WARNING:
HAZARDOUS ENERGY. MAKE PROPE
CONNECTIONS: SEE OWNER'S MAN
80 Hz
ECS-10
LOW-PASS
CROSSOVER
Alifi
120 Hz
40 Hz
INTERNAL
X-OVER
SUBWOOFER
DIRECT
POWER
180°
PHASE
R
ON
L
OUTPUT
INPUT
OFF
LFE
SPEAKER LEVEL INPUT
+
-
-
+
R
L
120V~
60HZ
8A
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR
AVIS:
ECS-10
Riv
5. Plug the ECS-10’s power cord into an un-switched AC outlet.
To connect an ECS-10 Subwoofer using standard Left/Right preamp
outputs:
CAUTION: Due to the power requirements of the ECS-10, it must not
be connected to the accessory outlets on a receiver or processor. If a
power-strip or surge protector is used, make certain that it is rated to
accommodate the ECS-10’s power requirements.
1. Turn off all system components and unplug the processor or receiver
and the ECS-10 from their AC power source.
2. Locatethe“Left/Rightpreampoutputs”ontherearpanelofyourreceiver
6. Reconnect your processor or receiver to the AC power source.
or processor.
7. Proceed to the “Setting the ECS-10’s Controls” section to learn about
Some audio products that do not offer digital surround processing will
have these types of jacks. If your receiver or processor does not have this
type of output you will need to follow the “Connecting to a system with no
pre-amp outputs” instructions that follow this section.
the ECS-10’s controls and how they operate.
Connecting to a System without a Subwoofer
Preamp Output, but with Standard Left/Right
Preamp Outputs
3. Connect one end of the audio interconnects to the left and right preamp
outputs on the receiver or processor.
If your system does not have a dedicated subwoofer preamp output, but has left/right
preamp outputs, you can use these jacks to connect your receiver or processor to the
subwoofer amplifier. See Diagram 2 below.
4. Locate the connections labeled “INPUT” on the rear panel of the ECS-10
and connect the other end of the interconnects to these jacks.
6
Outlaw Audio
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Subwoofer Placement
5. If you are using a separate power amplifier, connect a second set of
interconnects to the connections labeled “OUTPUT” on the ECS-10
power amp.
1. Turn off all system components and unplug the receiver and/or amplifier
and the ECS-10 from their AC power source.
2. Locate the front left/right speaker output terminals on your receiver or
Note:TheECS-10’slineleveloutputisbandwidthlimitedtosignalsabove
80Hz. ThisenablesyoutousetheECS-10withsmallsatellitespeakersby
limiting the amount of low frequency information they will be asked to
reproduce. Subsequently, the reduced demand on your power amplifier
and speakers will result in better sound across the board.
amplifier.
Incaseswherethereareboth“A”and“B”terminals,the“A”terminalsshould
be used. Disconnect any wire that is presently connected to these terminals.
3. Using the same type of speaker wire used for your other speaker
connections; connect the left and right channel speaker outputs of your
receiver or amplifier to the ECS-10’s “Speaker Level Input”.
6. Locate the corresponding amplifier channels on your dedicated power
amplifier and connect the other end of the interconnects to these jacks.
NOTE: Be sure to connect the speaker wires to the appropriate input
binding posts located on the back of the ECS-10, making certain that
the polarity (-/+) on the receiver or amplifier matches the polarity on
the binding posts of the subwoofer amplifier. In most cases this means
connecting the red terminal on the receiver or amplifier to the red
terminal on the ECS-10, but always check the markings on the rear
panel to insure “+ to +” and “- to –“ connections.
7. Plug the ECS-10’s power cord into an un-switched AC outlet.
Due to the power requirements of the ECS-10, it must not be connected to
the accessory outlets on a receiver or processor. If a power-strip or surge
protectorisused, makecertainthatitisratedtoaccommodatetheECS-10’s
power requirements.
4. Plug the ECS-10’s power cord into an un-switched AC outlet.
8. Reconnect your processor or receiver to the AC power source.
CAUTION: Due to the power requirements of the ECS-10, it must not
be connected to the accessory outlets on a receiver or processor. If a
power-strip or surge protector is used, make certain that it is rated to
accommodate the ECS-10’s power requirements.
9. Proceed to the “Setting The ECS-10’s Controls” section to learn about
the ECS-10’s controls and how they operate.
Connecting to a System with no Preamp Outputs
If no low level subwoofer or standard left/right output is available, you will need
to run speaker wires from your main amplifier or receiver to the subwoofer
amplifier. See Diagram 3 below.
5. Reconnect your receiver and/or amplifier to the AC power source.
6. Proceed to the “Setting The ECS-10’s Controls” section to learn about
the ECS-10’s controls and how they operate.
To connect the ECS-10 using high level inputs:
Diagram 3: Connecting to a System with No Preamp Outputs
SUBWOOFER
VOLUME
MIN
MAX
INPUT
INPUT
INPUT
INPUT
INACTIVE
ACTIVE
AUTO ON/OFF
80 Hz
ECS-10
LOW-PASS
CROSSOVER
FRONT RIGHT
FRONT LEFT
CENTER
SURROUND RIGHT
120 Hz
40 Hz
INTERNAL
X-OVER
SUBWOOFER
DIRECT
POWER
180°
PHASE
R
ON
OUTPUT
OUTPUT
OUTPUT
OUTPUT
L
+
+
+
+
OUTPUT
-
-
-
-
INPUT
WARNIN
HAZARDOUS
CONNECTION
OFF
LFE
SPEAKER LEVEL INPUT
+
-
-
+
R
L
120V~
60HZ
8A
Riv Alifi
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR
AVIS:
ECS-10
ECS-10 Enhanced Cube Subwoofer
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Subwoofer Placement
Subwoofer Placement
Setting the ECS-10’s Controls
Placement of your subwoofer is a critical component in maximizing the per-
formance of your ECS-10. Placement influences the subwoofer’s “perceived”
frequency response, sound pressure level (SPL), and overall accuracy. Since each
listening room differs in virtually every aspect, the ideal location will also vary.
Phase Switch
Depending on the absolute phase of your main speakers and amplifier, as well as
the relative distance from the ECS-10 and main speakers to the listening position,
the bass in the crossover region may be smoother if you reverse the phase of the
ECS-10. Try both positions of the phase switch to determine which way sounds
more bass-heavy. The bass-heavier position is the setting where the output of the
ECS-10 and the main speakers are most in phase. Use program materials with
An easy way to find the right spot to place your new ECS-10 is to experiment with
what we call the “Subwoofer Switch Trick”. This process puts the subwoofer where
you normally sit and then lets you play the role of the subwoofer.
Place the subwoofer as close to your favorite listening position as possible. If pos- bass in the crossover region such as music containing bass drums, double basses,
sible, place the unit in front of your couch or easy chair, right in the room’s “sweet bass guitar, etc. to determine the correct setting.
spot”. Provided that there is no damage to your furniture, you may even place the
Variable Crossover
subwoofer on the chair or couch, but remember that the ECS-10 is heavy, and the
Outlaws are not responsible for any damage to your furniture or for arguments
this might cause with other members of the household!
By adjusting the variable crossover on the ECS-10, you can perfectly match the
ECS-10 to your main speakers. If your receiver or processor already has a built in
crossover, disablethecrossoverontheECS-10byflippingthe“LOW-PASSX-OVER”
switch to the “SUBWOOFER DIRECT” position. Refer to the owner’s manual for
your receiver or processor to see how to disable any internal crossover capability
it may have. If your receiver or processor does not have internal crossover control,
follow these steps to set ECS-10’s variable crossover:
Activate the test tone from your processor or receiver’s internal test tone generator,
or use your favorite test disc so that pink noise plays through the subwoofer .While
the test tone is playing, walk around your room to find the spots where you hear
the best bass response. Sometimes this may be in the center of the room, while
in other cases you may find the best spot in a corner or along a side wall.
Determine the +/- 3dB point of your main speakers. This frequency is usually
found on the speaker’s specifications sheet or may often be available on the
speaker manufacturer’s web site. Start with the crossover set approximately to
this point. By experimenting with the crossover frequency and level control, you
can fine-tune the ECS-10 so that there is a seamless link between the ECS-10
and the main speakers.
Turn off the test tone and move the subwoofer to the location where you hear
the best bass response. If that location is unacceptable or impractical, repeat the
procedure to the spot that is the best compromise between bass performance and
aesthetic considerations.
Notes On Subwoofer Placement
Try to avoid creating a listening position that falls directly between the front and If the actual +/- 3dB point cannot be obtained from the speakers’ specifications
back walls and this may cause a strong interference effect due to the collision or the manufacturer’s web site, you can use the following chart as a guideline:
between bass waves bouncing off the rear wall and new bass waves from the
ECS-10. When this happens you might hear an unnatural “build up” in the low
frequencies where the bass sounds “bloated”, based on the specific dimensions
of the room and the particular frequency being reproduced.
40 Hz
60 Hz
80 Hz
Large tower speaker with one 12 or 15-in. woofer or two 10-in. woofers;
Small tower speaker with one 10-inch woofer or two 8-inch woofers
Small tower or large bookshelf speaker with one 8-in. or two 6-in.
woofers
In other situations you might encounter a “null”, which is caused by two low
frequency waves canceling each other out. When this happens you will find that
your favorite listening position is bass shy. In this type of placement situation bass
response will suffer greatly regardless of how powerful the subwoofer is. The best
way to solve this problem is to change the location of the seating position so that
the distance to the front of the room is different than that to the back of the room.
Bookshelf speaker with one 6-in. or two 5-in. woofers
100 Hz Bookshelf speaker with one 5-in. woofer or two 4-in. woofers
120 Hz Satellite speaker with one 4-in. woofer or one or two 3.5-in.
woofer(s)
Volume Level
Using the built-in test tones of your receiver/processor, match the levels of all of
your speakers including the ECS-10 as described in your receiver or processor’s
owner’smanual. Asettingof5ontheECS-10’svolumeknobshouldprovideenough
gain to properly match the sub level to your speakers. We recommend using an
SPL meter such as the Radio Shack (part number 33-2050). When using the test
tones, measure from the listening chair and set the meter to the 75 dB level. In
order to accurately measure levels between channels use “C” weighting and the
“slow” setting.
Note: The Radio Shack meter is down about 12 dB at 16 Hz, 7 dB at 20
Hz, and 4 dB at 25 Hz. Add these numbers to the readout to compensate
for these errors if necessary.
8
Outlaw Audio
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Troubleshooting
The Scattered Subwoofer System
(Two ECS-10’s)
Care and Maintenance
Cleaning
Why Two Subwoofers?
In most circumstances two subwoofers will perform better than one. While you
might assume this is for added SPL, the greatest benefit will actually be smoother
bass response.
When the ECS-10 Subwoofer cabinet becomes dirty, wipe it with a clean, soft, dry
cloth. If necessary, first wipe the surface with a soft cloth slightly dampened with
mild soapy water, then with a fresh cloth dampened with clean water. Wipe dry
immediately with a dry cloth.
NEVER use benzene, thinner, alcohol or any other volatile cleaning agent. Do not
use abrasive cleaners, as they may damage the finish of the metal parts. Avoid
spraying insecticide, waxes, polishing agents, or any aerosol product near the unit.
Room shape, the cubic volume of the room (width x depth x height), furniture,
floor coverings and even wall and ceiling material all play a roll in bass per-
formance. These factors create peaks and dips in the level of low frequencies at
different points in the room. That said, two properly positioned subwoofers will
distribute the bass throughout the room with greater accuracy than a single sub.
For this reason, many professional acousticians and installers recommend more
than one subwoofer. The final result is that you will create a much larger “sweet
spot” where the bass is powerful, but more importantly, smooth and consistent.
If near perfect bass response is your goal, consider using two ECS-10 Subwoofers.
When You Are Away
If you will not be using your home theater system for an extended period of time,
it is always a good idea to turn the unit off using the Master Power Switch on the
rear panel of the subwoofer. This will prevent the automatic turn on circuits from
accidentally powering the system on during your absence.
What’s Needed to Connect Two Subwoofers?
Troubleshooting
Most of today’s digital receivers and preamp/processors provide a single subwoofer
output. Connecting two subwoofers to these systems is as simple as adding a
Y-adapter. A Y-adapter splits a single output into two separate outputs. Be sure to
use a Y-adapter that is of equal or better quality than the subwoofer cables you
intend to use. (We recommend the Outlaw Audio PCA Y-Adapter.)
Your ECS-10 Subwoofer is designed for trouble free operation. If you follow the
instructions in this manual you should experience many years of high quality
listening enjoyment. However, as with any sophisticated electronic device, there
may be occasional problems upon initial installation, or during the life of the unit.
Troubleshooting Guide
The table below provides a brief list of minor problems that you may be able to
correct yourself. If these solutions do not rectify a problem, or if the problem
persists, contact us for assistance.
To use the Y-adapter, insert the single male end of the cable to the subwoofer
output of your receiver or processor. On the opposite end of the Y-adapter you will
now have two separate subwoofer outputs, one for each sub.
Placement and Level Control
Placement and level control of two subwoofers is somewhat more complicated
than using a single subwoofer. However, the end result of two properly placed and
calibrated subwoofers is well worth the added effort.
Humming or
Buzzing Noise
Power down your system and remove the
Interconnects between your components. Power
your system back on. If the hum goes away when
the interconnects are disconnected, the hum is
coming from the rest of your equipment. Plug In the
Interconnects one at a time for each component
until you come across the specific component
generating the hum.
The procedure for placement of the second subwoofer is identical to that of de-
termining the placement of the first subwoofer (see the “Subwoofer Placement”
section of this manual). However, the second sub should be placed in the seating
area outside of the “sweet spot” where good bass response is also required. Walk
around the room until you find the area where the bass sounds the best, just as
described in the process for locating a single sub. This spot will almost always be
different than the one that was best for the primary sub.
No output from
the subwoofer
(Blue LED does
not light up)
Check that the power cord is plugged in securely
at both ends and make sure that the power outlet
the subwoofer is plugged into is functioning properly.
NOTE: When calibrating your second subwoofer, be sure to turn off the first
sub. This will help you to determine ideal placement without being mislead
by the response of the first sub.
The subwoofer is
not receiving a
signal
Recheck the connections between the receiver/
processor and the subwoofer. On the back of the
subwoofer, make sure the power switch is set to
“auto” or “on”.
When calibrating the final levels of each subwoofer, you may want to reduce
their output to compensate for the added 3 or 4 dB of gain created by using two
subwoofers together.
If you sense a loss of bass output after properly locating and calibrating both
units in a two-subwoofer system, the likely problem is that the two units are
out of phase with each other. If this occurs try flipping the phase switch on the
back of one or both of the subwoofers until the bass returns. For more informa-
tion regarding the phase control function, please read the “Setting the ECS-10’s
Controls” section of this manual.
No output from
the subwoofer
Connect the signal cable to another subwoofer
or amplifier. If you get output, then the amplifier
is faulty. Email or call technical support for
authorization to send the amplifier back for service.
ECS-10 Enhanced Cube Subwoofer
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Specifications
Outlaw Service Information
TheOutlawAudioECS-10Subwooferdoesnotcontainanyuserserviceableparts. If
yoususpectaproblemthatmayrequireserviceassistance, callusat866-688-5292.
ECS-10 Enhanced Cube Subwoofer
Specifications
It is important that only a service agent authorized by Outlaw Audio carry out any
repairs. Keep your sales slip or receipt in a safe place with this manual so that it
will be available to verify the purchase date, should you experience a problem
covered by our warranty.
Woofer
10 inch front firing (8 inch piston diameter)
Magnet Structure
Voice Coil
21.6 lbs
3 inch Dual Layer
The Outlaw Audio
Magnetic Shielding
Amplifier
Yes
30-Day Satisfaction Guarantee
(Class D) 1000 watts RMS Power (2000 watts Dynamic)
This product is guaranteed to satisfy all your needs for a high performance sub-
woofer system. If for any reason, you are not completely satisfied with it, please
contact us at 866-OUTLAWS (688-5297) within 30 days of receipt of the unit and
you will receive a return authorization.
High Pass Crossover 80 Hz
Low Pass Crossover
Phase
40 Hz — 120 Hz
0° or 180°
Please save all of your packing material in that the ECS-10 is heavy and can
get damaged in shipping without proper protection. We recommend that you
keep the packing (even after 30 days) so that if you ever move, the unit will be
adequately protected.
Frequency Response 23 — 120 Hz ( 3 dB)
Inputs
Gold plated line-level and speaker-level
80 Hz
If you decide to return the ECS-10, the only cost you will be responsible for is the
shipping charge to return it to us. When your subwoofer arrives, we will inspect
it to insure that it was shipped back to us in original condition. Upon satisfactory
inspection, we will issue a full credit for your original purchase price.
Outputs (Line-level)
Dimensions (H/W/D) 13.23 in. (inc. feet) x 12.375 in. x 13.875 in.
Shipping Weight 46 lbs.
10 Outlaw Audio
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual
Outlaw Audio Limited Warranty
Outlaw Audio LLC Limited Warranty
In the event that you wish to return your Outlaw ECS back to us, for any
reason, please call to arrange for a Return Authorization Number. This will
insure that your problem is discussed with a service technician who will
determine if there is a quick solution to your problem.
This warranty protects the owner of the Outlaw Audio LLC (hereby referred
to as Outlaw Audio) ECS-10 Enhanced Cube Subwoofer (the PRODUCT) for
three (3) years from the date of purchase.
This warranty covers all defects in material and workmanship with the
following specific exceptions. These are:
OutlawAudioshallnotbeliablefor, inanywayresponsiblefor, anyincidental
or consequential damages of any kind. Some states do not allow limitations
on how long an implied warranty lasts and/or do not allow the exclusion of
incidental or consequential damages, therefore, the limitations and exclu-
sions stated herein may not apply to you. This warranty gives you specific
legalrights;andyoumayalsohaveotherrightswhichvaryfromstatetostate.
■
Damage caused by improper installation or adjustment
■
Damage caused by accident, unreasonable use or neglect
■
Damage from failure to follow instructions contained in this
Owner’s Manual
■
THEREARENOWARRANTIESGIVENBYOUTLAWAUDIOWHICHEXTEND
BEYONDTHEDESCRIPTIONGIVENHEREIN.ANYIMPLIEDWARRANTIES
OF FITNESS FOR PURPOSE SOLD, MERCHANTIABILITY, DESCRIPTION,
QUALITY OR ANY OTHER MATTERS ARE LIMITED TO THE TERMS OF
THE EXPRESSED LIMITED WARRANTY STATED HEREIN.
Damage from the performance of repairs by someone not authorized
by Outlaw Audio
■
Any unit on which the serial number has been defaced, modified,
or removed
■
Damage occurring during shipment
Products are sold on the basis of specifications applicable at the time of
sales. Outlaw Audio shall have no obligation to modify products once they
have been sold.
■
Units which have been altered or modified in design, appearance
or construction
This warranty covers only the actual defects within the PRODUCT itself. IT
DOES NOT cover costs of installation in (or removal from) a fixed installa-
tion, or normal set-up, claims based on any misrepresentation by the seller,
or performance variations resulting from installation related circumstances
such as signal quality, AC power or incompatibilities with speakers and/or
other system components.
This warranty is applicable only in the United States.
For applicability in other countries, please call Outlaw Audio.
During the warranty period, Outlaw Audio will, at its option, either repair the
defect, or replace the defective product, or the defective parts, or components
thereofatnochargetotheownerforpartsandlaborcoveredbythiswarranty.
If necessary repairs are not covered by this warranty, or if a unit is examined
which is not in need of repair, you will be charged for the repairs and/or the
examination. If non-warranted repairs are needed, we will notify you of the
estimated cost and ask for your authorization to perform said repairs.
O u t l a w A u d i o
You must pay shipping charges incurred in getting your Product to the fac-
tory. We will pay the return shipping charges if the repairs are covered by
the warranty. Please save the original shipping cartons as the unit MUST
be returned in the original carton and packing.
(Replacement cartons are available at a modest charge.)
Ifyourproductneedsservice, pleasecallOutlawAudioLLCat866-OUTLAWS
(688-5297) or 866-OUTLAWA (688-5292).
You will need to present the original bill of sale to establish the date of
purchase. In the event that the proof of purchase cannot be established with
the original receipt, the warranty period shall be determined by the earliest
date of manufacture shown on the unit, provided that the serial number
label has not been altered in any manner, or by our records relating to that
serial number.
ECS-10 Enhanced Cube Subwoofer 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|