Baby Monitor
Secure 500
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS AND SAFETY INFORMATION 1
Do not place the cord in a high "wear and tear" location.
Never use a frayed or compromised cord.
IMPORTANT
Please read this user guide thoroughly before use.
Never use or place your Parent or Baby units in or near
moisture or water (e.g. near bath or pool). Immersing in
water can cause electric shock and even death.
Your ORICOM Baby Monitor is designed to be an aid and
should not be used as a substitute for responsible and
proper adult supervision of a child.
The Baby Monitor has been designed to provide some
added reassurance in the form of sound transmission
for those times when you are not in the same room as
your baby provided you always stay within hearing range
of the baby monitor during use. Your Baby Monitor is
not a medical device, nor a device to prevent cases of
Sudden Infant Death Syndrome (SID'S) or "cot death",
and you should not rely on it for your baby's wellbeing. It is
important that you regularly check on your baby personally.
Power requirements
This product requires an electrical supply of 220-240 volts,
single phase alternating current.
CAUTION
Use only the mains power adaptors supplied with this
equipment. Incorrect adaptor polarity or voltage can
seriously damage the unit and/or cause physical harm
and even death. The adaptors may become warm during
use, please take care when handling.
AC Adaptor (Baby unit / Parent unit)
!
Make sure the Baby unit, Parent unit and mains adaptor
cables are kept out of reach of your baby and other young
children within the house at all times, at least one metre
away from the baby’s cot.
Input: 100-240VAC 50-60Hz
Output: 7.5VDC 500mA
Never place the baby unit inside your baby’s cot, bed or
playpen.
If you plan to use your Baby monitor whilst travelling
overseas, make sure that the voltage shown on the mains
power adaptor is the same as the local mains power before
connecting to the power supply. Do not use any voltage
converter with the monitor.
Never cover the Parent or baby units with clothes, towels
or blankets or any other item.
Download from Www.Somanuals.com. All Manuals Search And Download.
2 WARNINGS AND SAFETY INFORMATION
• The Ni-MH batteries supplied with this product may be
able to be recycled once they are unable to recharge
during normal operation. Always observe your local
Council /State regulations regarding the disposal of
your packaging materials, exhausted batteries, and old
equipment.
Battery requirements
Each parent unit requires two rechargeable Ni-MH
batteries, size AA 1.2V 1300mAh.
• Do not dispose of the batteries in a fire, as they can
explode.
• Always recycle where possible. Do not use your baby
monitor in an explosive hazard area such as where
there is gas leaking.
• Do not open, unscrew or temper with any of your
baby monitor units or battery. Always carry out repairs
through your authorised ORICOM representative or
other duly qualified tradesperson.
• As there is a slight chance that the product could be
damaged by an electrical storm, it is recommended that
users unplug from the mains supply during an electrical
storm.
• Released electrolyte from the battery is corrosive
and can cause damage to the eyes or skin. It can
be toxic and fatal if swallowed. If there is any sign of
poisoning, immediately call emergency 000.
Cleaning and care
• When your Baby Monitor is not in use, it is recom-
mended that you disconnect it from the mains supply
and remove the batteries.
The surface of the case can be cleaned with a dry, soft,
lint-free cloth. Never use cleaning agents, particularly
aggressive solvents. Apart from occasional cleaning of the
case, no other care is necessary.
• Observe the proper polarity, or direction, of any
battery. Reverse insertion of the battery cell can
result in leakage or explosion and in turn harm or
even death.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED 3
Thank you for choosing this monitor from Oricom.
Installation and Charger
Your Secure 500 Baby Monitor offers the best Digital
Technology.
For the Parent Unit
1. Remove the battery cover
on the back of the Parent
Unit by pressing and
sliding it down. Insert the
rechargeable batteries as
marked on the unit and
close the cover again.
2. Place the Parent Unit into
the Charger Pod.
3. Plug the mains adaptor into a mains power socket.
INTERFERENCE
FREE FREQUENCY
DECT (Digital Enhanced Cordless Telecommunications) is the
most widely used worldwide digital cordless technology, offering
amazingly clear sound, long range and maximum voice security.
DECT operates on the 1.8Ghz frequency which eliminates potential
interference from other common wireless devices such as cordless
telephones, wireless networks (Wi-Fi), Bluetooth and cordless
computer devices.
The red charger light on the charger pod will illuminate
indicating that the Parent Unit is charging.
(the light will remain on to ensure
optimum charge is maintained).
Pack Contents
• Parent unit (receiver)
WARNING
• Baby unit (sender)
DO NOT USE STANDARD/ALKALINE BATTERIES
IN THE PARENT UNIT, AS THERE IS A RISK OF
EXPLOSION AND/OR INJURY. USE ONLY Ni-MH
RECHARGEABLE BATTERIES AS SUPPLIED.
• Mains adaptor with charger pod
• 2 x NiMH rechargeable batteries (type AA, 1300mAh)
• Mains adaptor with power cord
• Wall mounting bracket for the baby unit
• Purple travel bag
!
Download from Www.Somanuals.com. All Manuals Search And Download.
4 GETTING STARTED
4. Press [
] to turn the Parent Unit on.
4. Press and hold [
] key to turn on the baby unit.
• Before first use, or if it has been out of use for a long
time, the Parent Unit will need to be charged for 14
hours. During this time, the Parent Unit will operate
from the Charger pod when switched on. Note that the
Parent Unit cannot be used without batteries, even if it
is placed in the charger pod.
• The Baby Unit should be placed about 1 metre
to 1.5 metres away from the baby's cot on a flat
surface. Never place the Baby Unit inside the cot,
bed or playpen. Make sure the unit, cords and mains
adaptor are out of reach of the baby and other
young children. Never place either Unit on antique
or polished surfaces (as slippage or scuffing may
occur). The unit may cause harm if it falls onto baby
or other young children.
For the Baby Unit
1. In event of a power failure, your Baby Monitor can
switch to battery power. It is therefore recommended
that you insert non-rechargeable batteries in the
Baby Unit.
2. Remove the battery cover
on the back of the Baby
Unit by pressing and sliding
it down. Insert 4 alkaline
batteries of the type AA
(not provided) as marked
on the unit and close the
Note:
If you place the Parent and Baby units too close together
you will hear a high pitched noise called "feedback", this is
normal. The units are designed to be located in separate
rooms.
To prevent feedback, do not take the Parent unit into the
nursery/baby's room.
Do no Press Talk button when the Baby unit and Parent
unit are positioned in the same room. Feedback will be
generated if the talk button is pressed when the Baby unit
and Parent unit are within 3 metres of each other.
cover again. Do not use
rechargeable batteries in
the Baby Unit.
Battery lock
Child tamper proof lock for
the battery compartment.
3. Plug the power cord into the power input at the side of
the Baby Unit and plug the adaptor plug into a mains
power socket.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED 5
1. Insert screws into the wall through the wall mount.
Wall mounting the Baby Unit
The recommended mounting screw size is diameter
3mm and length 20mm,the diameter of the screw
head and the screw should not be greater than
7.55mm and 4mm respectively.
Use the following wall mount diagram to locate and install
the mounting pins/screws if you prefer to wall mount your
base unit. The dimensions are shown in millimeters (mm).
58.00
2. Put the base unit down into wall mount directly.
Note:
Other wall mounting methods are not recommended and
may damage the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
6 YOUR BABY MONITOR
Baby unit (Sender)
Night Light
Press to switch Night Light on or
off.
Up/Register
Increase speaker volume.
Use to enter registration mode.
Brightness
Press to adjust the Night Light
brightness (once Night Light is
switched on). There are three levels.
Down/Default
Decrease speaker volume.
Used to restore original settings.
Page
Press to page the Parent unit
– useful for finding when it is
misplaced.
Record
Used to record your voice to
comfort your baby and to delete
the recorded message.
Play/Stop
Press to play lullaby, press
again to stop.
Lullaby
Press to select lullaby 1, 2, 3
or Play All.
Power on/off
Press to switch on or off.
Microphone
Link light
Green when linked to Parent
unit. Flashes if not linked - first
30 seconds. Flashes when Talk
is pressed on Parent unit. Red
flashing if not linked longer than
30 seconds.
Display
Power saving backlight
switches off 15 seconds
after last button push.
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR BABY MONITOR 7
Back of Baby unit
Underside
Auxiliary input socket
Use to plug in an external
audio source, e.g. MP3
player so you can play
your own choice of
music to baby.
Temperature sensor
Power socket
For connection
to mains power.
Battery lock
Child tamper proof
lock for the battery
compartment.
Download from Www.Somanuals.com. All Manuals Search And Download.
8 YOUR BABY MONITOR
Parent unit
From the Parent unit you can listen to your baby and
operate the Baby unit by remote control.
LED Link indicator
Green On
– Linked to Baby unit
Green flashing
– Not linked to Baby unit
– first 30 seconds
Red Flashing
– Not linked to Baby unit
– for longer than 30 seconds.
Talk (on side of unit)
Press to talk to your baby.
Sensitivity / Volume level LEDs
During use, lights indicate:
– Sensitivity level
Display
Power saving backlight switches off
15 seconds after last button push.
– Volume level
Torch (on side of unit)
Press and hold to switch on.
Press to switch off.
Up
Increase speaker volume.
Scroll up through menu options.
Select
Press to confirm the menu option displayed.
When lullaby is playing, press to pause or resume.
Power on/off
Press and hold to switch the power on or off.
Menu
Press to open the menu.
Press and hold to exit the menu.
Microphone
Mute
Press to switch the speaker off,
press again to switch it back on.
Down/Default
Decrease speaker volume.
Scroll down through menu options.
Used to restore original settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR BABY MONITOR 9
Back of Parent unit
Charging light
Indicates parent
unit is charging.
Power socket
For connection
to mains power.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 LCD DISPLAY OF BABY MONITOR
Baby unit display icons
Parent unit display icons
Battery full (icon not
displayed when using
mains power).
Displayed when the
Night Light is on.
Speaker is switched off.
Sound alert is on.
Full battery
Night Light is on.
Lullaby is playing.
Displayed when a
lullaby is being played.
Battery half full.
Battery low.
Temperature is within
normal levels.
On when the
Mid charge
temperature is normal.
Flashing when it is
too hot or too cold for
baby.
Timer is on.
Low charge
Vibrate alert is on.
Empty
Scrolling bars when
charging.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION 11
Once you have set up your Baby Monitor, you will be able
to hear the sounds in your baby's room through the Parent
Unit. And also see the green and red sensor lights around
the top of the Parent Unit rise and fall with the sound levels.
• Keep pressing the button until the 3 LEDs to the
far right illuminate as well. The Parent unit is now
switched on and will search for and link itself to the
Baby unit.
• If the connection between the Parent and Baby
Units is broken at any time the green Link light on
the Parent Unit will flash slowly, the parent unit will
beep to alter you that the link has been lost and the
green and red sensor lights will cease to react to any
sounds. Move closer to the baby unit or follow the
• Green LINK Light is lit while unit searches for the
baby unit.
• To switch Off, press [
] key until the display goes
blank and the link light goes off.
directions in chapter "Troubleshooting" to re-establish Changing Baby unit from battery to
the link.
mains power
Power On/Off
•
To conserve battery power on the Baby unit or when
the batteries are low or flat, plug the Baby unit into the
mains. If currently running on batteries and switched
on, changing from battery to mains power will be instant
and will not affect any of the settings.
Baby Unit
• Press [
] key to switch on the unit.
•
You can use the Parent unit to monitor baby while it is
charging.
• The Green Link light comes on to show that the unit
is within range of the Parent unit.
• To switch Off, press [
] key until the display goes
Monitoring
blank and the link light goes off.
•
Position the baby unit accordingly. It should be placed
at least 1 metre away from the baby.
Take the parent unit to monitor.
Parent Unit
• Press and hold [
will illuminate.
] key. The Link LED on the far left
•
Download from Www.Somanuals.com. All Manuals Search And Download.
12 BASIC OPERATION
•
•
Audio picked up by the baby unit microphone is depicted
on the 7 Lights on the parent unit (4 green and 3 red).
The more audio is picked up, the more Lights will be lit.
When no audio is picked up, all 7 Lights will be off.
If the volume of the Parent Unit is turned off, an alert will
sound and the unit will vibrate if the vibrator is set to on.
• Press [ ] or [ ] to select the desired level. For
example, when the current sensitivity level is level 3,
digit "3" will be displayed.
• There are five levels of sensitivity: level 5 represents
the highest sensitivity, level 1 represents the lowest
sensitivity.
Note:
• Press [ ] key to confirm.
Do not position the baby unit and the parent unit close to
each other or in the same room as a high-pitched feedback
• Press [Menu] key to return to the standby display.
noise may be generated. User can press [
] key to
] key again
Mute
temporarily turn off the speaker. Press [
Mute
Adjusting Volume
will turn on the speaker.
There are 5 volume levels on each Unit and an Off setting
on the Parent Unit.
Sensitivity
You can adjust the sensitivity on the Parent Unit to monitor
the sound from the Baby Unit. For example, if your baby is
a particularly quiet sleeper, you can increase the sensitivity
levels so that you are sure to hear if baby disturbs or
becomes uncomfortable.
On the Parent Unit,
•
Press [ ] key to increase the volume or [ ] to decrease the
volume. The volume level is shown on the display bars.
On the Baby Unit,
There are 5 different levels. Level 5 is the most sensitive
and the microphone in the Baby unit is always on. At levels
1-4, the microphone will be voice activated by the noise
baby makes.
•
Press [+] key to increase the volume or [–] key to
decrease the volume.
Note:
You cannot switch the volume off on the Baby Unit.
• Press [Menu] key and use [ ] or [ ] key to scroll to
Sensitivity. Press [ ] key.
Changing the volume setting on the Baby Unit will also
affect the volume when you use the talk back feature or
when playing a lullaby.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION 13
Note:
Talk Back
If no button is pressed, the paging tone will stop after 2 minutes.
You can use the talk back feature to talk to your baby.
If the Parent Unit volume is off, after paging operation, the
Parent Unit volume will reset to the default volume setting.
Whilst using Talk Back you will not be able to hear your
baby until you release the [Talk] key.
Torch
•
Press and hold [TALK] key on the Parent unit to speak
to baby.
Press [TORCH] key on the parent unit to switch the torch
on and off.
•
"Talk" is shown on the display and the green link lights
on both Units flash.
Night Light
•
•
Talk into parent unit microphone.
Release [TALK] key to hear your baby again.
Note:
Do not press [TALK] key when the baby unit and the parent unit
are in the same room as a high-pitch noise will be generated.
The Night Light on the baby unit can be turned on or off
from either the baby unit or the parent unit. You can set
a comforting Night Light with a choice of three brightness
levels.
If the Parent Unit volume is off, the Parent Unit volume will
reset to the default volume setting.
Baby Unit
•
•
Press [ ] key to turn Night Light on or off.
Press [ ] key repeatedly to select the brightness
settings.
Paging
If the Parent Unit is misplaced, you can use the page
button on the Baby Unit to locate the Parent Unit.
Parent Unit
If the Night Light on the baby unit is off,
•
Press [Page] key on the Baby Unit. The paging alert will
sound.
•
Press [Menu] key and use [ ] or [ ] key to scroll to
"Night Light".
•
•
"PAGING" is shown on the LCD display of both units.
To stop the Page alert, press any button on the Parent
Unit, or press [Page] key again on the Baby Unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 BASIC OPERATION
Follow the "Temperature setting" on the Menu Setting
section to set the temperature range and temperature alert.
•
Press [ ] to confirm and use [ ] or [ ] key to set the
Night Light on or off.
Sound Alert
Lullaby
Sound alerts are played only on the Parent Unit. You can
turn on/off the sound alerts through the menu.
Your baby can be soothed to sleep by a gentle lullaby from
the Baby Unit. Each lullaby is played repeatedly for 15
minutes. Select one of the five melodies or select Play All
for a medley of all 5 lullabies for 15 minutes. The lullaby
feature can be turned on and off from both the Baby Unit
and the Parent Unit and is indicated on both by a musical
note icon. The icon and the lullaby name will be shown on
both displays when the lullaby is playing. The lullabies will
play for 15 minutes.
Follow "Sound Alert setting" on the Menu Setting to set the
sound alert.
Vibrate Alert
Vibrate alert is only available on the Parent Unit. You can
turn on/off the vibrate alert through the menu.
You can also record your own lullaby or story lasting up to
2 minutes. To play your own recorded lullaby, select Own
from the menu list.
Follow "Vibrate Alert" on the Menu Setting to set the sound alert.
You can also plug in an external audio source like an MP3
or CD player and play music or audiobooks of your own
Temperature
It is very important for your baby's health to ensure that choice. The auxiliary port is on the back of the Baby unit.
they are kept at a safe temperature. This includes the
room temperature, baby's temperature, baby clothing and
bedding (contact your local health authority to ensure you
Playing the Lullaby
are aware of the current guidelines). Your Baby Monitor
can show the current room temperature on the Baby Unit
and the Parent Unit, and can even be set to alert you if the
temperature falls outside of a defined range.
Baby Unit
•
Press [ ] key. The lullaby name is shown on the LCD
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION 15
•
•
Press [ ] key repeatedly to select different lullabies.
Press [ ] key to play.
Temporarily Stopping the Lullaby Play
You can stop the lullaby play temporarily. This operation is
only available on the parent unit.
Parent Unit
•
•
•
•
•
Press [Menu] key and use [ ] key to scroll to "Lullaby".
Press [ ] key to confirm. "Play?" is shown on the display.
Press [ ] key to play the Lullaby.
When lullaby is playing,
•
Press [ ] to pause. "Paused" is displayed and the " "
icon flashes on both units.
Or press [ ] key to select "Select New" and press [ ] key.
•
•
Press [ ] again will resume the lullaby play.
If lullaby play is not resumed within 60 seconds, lullaby
will stop automatically.
Use [ ] or [ ] key to select "Lullaby 1-5", "Own", " Aux"
or "Play All" and press [ ] key. The selected lullaby will
be played.
Record a lullaby
Stopping the Lullaby Playing
Record your own Lullaby or story words up to 2 minutes long.
Baby Unit
When a lullaby is playing,
1. Press and hold [Rec] key on the Baby Unit. You can
start recording after the beep. REC and the recording
time are shown on the display.
•
Press [
] to stop playback.
2. To end recording, release [Rec].
To play your recorded lullaby, follow the steps for Playing
the Lullaby and select "Own".
Parent Unit
When a lullaby is playing,
Note:
•
•
Press [Menu]. The display shows "Stop Lullaby?".
Press [ ] to stop the lullaby.
Recording is only available when the memory is empty
(after it is deleted).
If an auxiliary player is connected, you must also switch off
the auxiliary player.
The baby unit will stop monitoring during lullaby recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 BASIC OPERATION
3 You can now use the external player.
Delete a recorded lullaby
Out of Range
1. Press and hold [Rec]. After 2 seconds the display
shows "Deleted".
When the baby and parent units have no link with each
other (eg. Out of range, parent unit or baby unit is not
powered on), the green Link LED flashes. If there is no link
for more than 30 seconds, "Not Linked" will be displayed
on both units. The link break alert will also be emitted from
the speaker of the Parent Unit every 30 seconds. The red
Link LED will flash. When the units are linked, the green
Link LED will be steadily lit.
2. Release [Rec].
•
To avoid deleting a recorded message, press [ ] on
the Baby unit to check whether the Own prompt is
displayed. If Own is displayed in the lullaby list, there is
a recorded message.
Connect to an auxiliary player
Note:
Plug another player into your Baby unit, to play songs or
stories.
Link break alert cannot be manually set on or off, but it can
be suppressed for 4 minutes by pressing any button.
There is only visual alert shown on the Baby Unit.
On the Parent Unit:
1 Press [Menu] and use [ ] or [ ] to select "Lullaby".
2 Press [ ], "Play Lullaby?" is shown on the display.
3 Use [ ] or [ ] to select "Select New" and press [ ].
4 use [ ] or [ ] to select "Aux" and press [ ].
You can now use the external player.
Low Battery
Baby Unit
When the unit is running on battery power and reaches low
battery level, the display will show Low Battery. Once the
low battery level is reached, the baby unit should still be
able to operate for approximately 30 minutes.
On the Baby unit:
1 Plug your player to the auxiliary input socket on the
back of the Baby unit.
2 Press the [ ] key repeatedly until you reach the AUX
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION 17
Running rechargeable batteries right down at least once a
week will help them last as long as possible. The charge
capacity of rechargeable batteries will reduce with time as
they age, so reducing the performance time of the parent
unit. Eventually they will need to be replaced.
Parent Unit
When the batteries on the Parent Unit reach a low level, the
display will show Low Battery. The low battery alert tone will
be emitted from the speaker every 60 seconds. Once the
low battery level is reached, the parent unit should still be
able to operate for approximately 1 hour and 30 minutes.
The low battery alert message and alert tone will be turned
off when fully charged batteries have been replaced.
Restore to Default Setting
You can return the baby and parent units to factory default
settings.
Charging the Battery
1 Press [ ] to switch the unit off.
Place the parent unit on its charge cradle to charge the
battery. When charging, the red LED on the charger will
light steadily. The bars in the battery icon on the Parent
Unit will scroll. When the battery is full, the battery icon
shows three bars and stops scrolling.
2 Press [ ] again to switch the unit back on.
3 While the unit is switching on, press and hold the [ ] key
on the parent unit or the [–] key on the baby unit until
you hear a beep. RESET is showed on the display. The
unit will restore all the original factory settings.
Note:
Note:
The Parent Unit must never be operated on the charging
cradle without batteries.
If [ ] or [–] is not pressed within 4 seconds, the unit
returns to idle mode.
If you want to restore the factory default settings on the
baby monitor, you will need to restore factory default
setting on the Baby Unit or on the Parent Unit individually.
The parent unit can be used on or off the charger pod.
When on the charger pod, the batteries will be recharged
at the same time. However, the time it takes to charge the
batteries to full will be longer when the unit is charged and
used at the same time.
Rechargeable batteries in the Parent unit give up to 12
hours continuous usage. Please note however, that new
batteries do not reach full capacity until they have been in
normal use for several days.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 MENU SETTINGS
Note:
Start playing
1. Press [ ] key, "Play?" is shown, press [ ] key to play
the lullaby.
2. To stop lullaby, press [Menu], "Stop Lullaby?" is shown
and press [ ] to stop lullaby.
All Menu setting operations are only available on the
Parent unit.
During setting, press [Menu] key to exit.
Night Light Setting
Selecting lullaby
1. Press [ ] key and use [ ] or [ ] key to select "Select
New".
2. Press [ ] key and use [ ] or [ ] key to select "Lullaby
1-5", "Own", " Aux" or "Play All" .
You can turn on or off the Night Light on the baby unit via
the parent unit.
1. Press [Menu] key on the parent unit. The display is
shown below:
3. Press [ ] key. The selected lullaby will be played.
Sound Alert Setting
Light On?
You can turn on/off the sound alerts on the Parent unit.
1. Press [Menu] and use [ ] or [ ] key to select "Sound
2. Press [ ] key to select Night light on or off.
alert". The display is shown as the figure:
Lullaby Setting
You can play lullaby on the baby unit via the parent unit.
Press [Menu] key on the parent unit and use [ ] or [ ] to
select "Lullaby". The display is shown below:
Sound Alert
2. Press [ ], "Alert On?" or "Alert Off?" is shown on the
display.
3. Press [ ] to confirm.
Lullaby
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS 19
Press [Menu] and use [ ] or [ ] to select "Temperature",
the display is shown below:
Sensitivity Setting
You can adjust the sensitivity on Parent Unit to monitor the
sound from the Baby Unit. For example, if your baby is a
particularly quiet sleeper, you can increase the sensitivity
levels so that you are sure to hear if baby disturbs or
becomes uncomfortable.
Temperature
1. Press [Menu] key on the parent unit and use [ ] or
[ ] key to select "Sensitivity". The display is shown below:
Setting Temperature Alert
You can set the temperature alert on the Parent Unit when
the temperature goes above or below these settings. If this
happens, the display will show "High" or "Low" as appropriate.
Sensitivity
1. Press [MENU] key and use [ ] or [ ] key to scroll to
"Temperature". Press [ ].
2. Press [ ] key and then use [ ] or [ ] key to select the
sensitivity level. There are 5 levels.
3. Press [ ] key to confirm.
2. "Alert on/off" is displayed, press [ ].
3. Use [ ] or [ ] to select "Alert On?" or "Alert Off?".
4. Press [ ] to confirm.
Note:
Temperature Setting
If the vibrator is set to on, the Parent Unit will also vibrate
when the temperature is too high or too low.
Pressing any button can suppress the alert sound until
temperature goes beyond further 2 degrees.
You can monitor the temperature in the baby's room. The
room temperature is constantly displayed on both Units.
An alert will sound when the room temperature is raised or
dropped out of the pre-set temperature range.
Please note the baby monitor cannot manipulate the
temperature in your baby’s room, it only provides a
temperature reading.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 MENU SETTINGS
Setting Temperature Range
Timer Setting
You can select your own minimum and maximum room
temperatures. The minimum temperature can be anywhere
between 10˚C and 19˚C and the maximum temperature
anywhere between 22˚C and 30˚C. Note the default setting
is 14˚C min. and 23˚C max.
Set countdown timer
The timer can be set to countdown from 1 minute to 99
hours 59 minutes. The TIMER icon [ ] is displayed along
with the countdown time.
1. Press [MENU] key to scroll to "Temperature". Press [ ].
2. Press [ ], use [ ] or [ ] key to select "Range".
Press [Menu] key and use [ ] or [ ] key to select "Timer",
the display is shown below:
3. Press [ ]. Press [ ] or [ ] to change the minimum
temperature setting.
4. Press [ ] to confirm.
5. Press [ ] or [ ] to change the maximum temperature
setting.
Timer
6. Press [ ] to confirm.
1. Press [ ] key, "Countdown" is shown on the display.
Press [ ] key.
Note:
If the temperature goes beyond the minimum or maximum
level, "Low" or "High" indication displays and the current
temperature flashes in the displays of both Units. If the
Temperature alert is set to On, an alert will be sound on
the Parent Unit. The alert sound will go off automatically
when the temperature falls within the pre-set range.
2. Press [ ] or [ ]. "Set Time" is shown on the display.
3. Press [ ], then use [ ] or [ ] key to set the hour.
4. Press [ ], then use [ ] or [ ] key to set the minutes.
Start or cancel countdown Timer
1. In the Timer setting menu, press [ ].
2. "Countdown" is shown on the display. Press [ ].
3. "Timer On?" or "Timer Off?" is shown on the display.
Press [ ].
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTINGS 21
3. "Timer Off?" is shown on the display, press [ ] to
Activate count up timer
The timer can count up from 1 second to 99 hours 59
minutes.
confirm.
If countdown is currently running, the count up timer will not
be available, and vice versa. Only one of the timers can be
used at one time.
The TIMER icon [ ] is displayed along with the countup
time.
Set clock
1. In the Timer setting menu, Press [ ].
2. Use [ ] or [ ] key to select "Count up". Press [ ].
This sets the clock on both units.
3. "Timer On?" is shown on the display, Press [ ] to
1. Press [Menu] and use [ ] or [ ] key to select "Timer".
Press [ ].
confirm.
2. Use [ ] or [ ] key to select "Clock" and press [ ].
3. "Set Time" is shown on the display. Press [ ].
4. Press [ ] or [ ] to set the time then press [ ] to
Start, Stop and Reset the count up timer
Parent Unit
confirm.
When count up is activated,
5. If you set the time format to 12 hour, you should set the
AM or FM. Press [ ] or [ ] to set AM/PM for 12 hours
then press [ ].
1. When it stops and displays 00:00:00, press [ ] to start,
it will count from 00:00:00;
2. When it is counting, press [ ] to stop. Counted time is
displayed steadily;
3. When it stops and displays a counted time, press
[ ] to reset it to 00:00:00;
4. Press [ ] again to restart it.
Set 12 or 24 hour Format
Time format menu is available only after Clock is activated.
1. Press [Menu] and use [ ] or [ ] key to select "Timer".
Press [ ].
Cancel count up timer
1. Press [Menu] and use [ ] or [ ] key to select "Timer".
Press [ ].
2. Use [ ] or [ ] key to select "Clock" and press [ ].
3. Use [ ] or [ ] key to select "Format" and press [ ].
4. Press [ ] or [ ] to select 12 or 24 hours and press [ ].
2. Use [ ] or [ ] key to select "Count up". Press [ ].
Download from Www.Somanuals.com. All Manuals Search And Download.
22 MENU SETTINGS
Vibrate Alert Setting
Vibrate alert is only available on the Parent Unit. You can
turn on/off the vibrate alert through the menu.
1. Press [Menu], and use[ ] or [ ] key to select "Vibrate".
The display is shown below:
Vibrate
2. Press [ ], "Vibrate On?" or "Vibrate Off?" is shown on
the display.
3. Press [ ] to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 23
Problem
Possible cause(s)
1. Check if the units are properly connected to the power
supply.
The red Power lights do not light on when you plug in.
2. Check if the power is turned on. If not, Press [
on the power.
] to turn
1. You may have moved out of range −move closer to the
Baby Unit and wait 5 seconds for the Link to establish.
The green Link light on the Parent Unit is flashing and
cannot hear the sounds from your baby's room.
2. You may need to re−establish the Link between the two
units. Turn both units off by pressing and holding the
[
] and then turn on again by pressing the [
].
Can't hear your baby on the Parent Unit but the Link light
is still glowing steadily.
Check if the volume is turned up on the Parent Unit.
Check if the rechargeable batteries are running low. Place
the Parent Unit on the Charger Pod to recharge them.
The Red Power light is flashing on the Parent Unit.
A high pitched ear piercing noise can be heard from the
units (feedback).
Check if the Parent and Baby Units are too close together.
Move them further apart.
Talk back feature is not working
Check that the volume is loud enough at the baby unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 PRODUCT SPECIFICATIONS
Feature
Specifications
Operating Frequency
1.8 GHz
Up to 300 m under optimum conditions. The range is
reduced in buildings (up to 50 m) as a result of walls, doors
etc.
Range
Input: 100-240 VAC 50-60 Hz
Output: 7.5 VDC, 500 mA,
Power supply (Baby Unit/Parent Unit)
Non rechargeable batteries, baby unit
(not included in the package contents)
Type: AA, 1.5 V Alkaline
Transmitting power
Average: 10 mW Maximum: 250 mW
Type: AA, 1.2 V, 1300 mAh NiMH
Approx. 12 hours
Re-chargeable batteries (Parent Unit)
Operating time with charged battery
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE 25
Warranty (Australia)
(a) Warranty Oricom International Pty Ltd (Oricom) warrants that
the product is free from defects in materials and workmanship
for a period of 12 months effective from the date of purchase.
This warranty in no way affects your statutory warranty under
the Trade Practices Act 1974 or any other similar legislation. It
is important that you read the Warranty Card as it contains full
and additional details of the warranty, limitation of warranty
and conditions for receiving the warranty services during the
warranty period. The Warranty Card is located in the package.
Oricom will not be liable for consequential losses including loss of
profits arising from a cause of action in contract, tort or any other
statutory or common law (except where a statute or any law prohibits
this exclusion). The warranty does not extend to damage caused by
misuse, negligence, excessive voltage or lightning. This warranty in
no way affects your statutory rights. Full details of the warranty are
contained in the enclosed warranty card.
Customer Support
If you feel this product is not working correctly please consult
the user guide and ensure that you are using the product in
accordance with the instructions.
(b) Exclusion and limitation of liability. Oricom will not be in
breach of a warranty or condition expressly stated in this User
Guide or the Warranty Card or implied by the Trade Practices
Act and excludes any liability arising under any statutory or
common law for damages or any other remedy if the damage
occurs as a result of:
To order spare parts additional parent units, replacement parts
and in case of any technical issues you may have with this
product please consult our website for further information or send
us an email for a prompt response to your enquiry.
(i) Failure by you to follow the instructions in the User Guide
for the installation and proper functioning of the product;
(ii) Negligence on your part or misuse by you of the product;
In the unlikely event of a fault developing, please contact us
for assistance. If the product is then found to be faulty you will
be asked to return it directly to us with a copy of the purchase
receipt.
(iii) Any un-controlled external cause to the product not
functioning including but not limited to electricity failure,
lighting, over voltage;
(iv) Non adherence by you to the warnings in the User Guide
and the User Guide generally; and
(v) Modification to the product or services carried out to the
product by anyone other than Oricom or on Oricom's
behalf.
Download from Www.Somanuals.com. All Manuals Search And Download.
Australia
Oricom International Pty Ltd
Locked Bag 658
South Windsor, NSW 2756
Customer Support
Email: [email protected]
Phone: 1300 889 785
Fax: (02) 4574 8898
Download from Www.Somanuals.com. All Manuals Search And Download.
|